2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
|
|
- Junior Jacobs
- 5 years ago
- Views:
Transcription
1 2/2-way ball valve with electric rotary actuator, ball valve in, N Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator Type 8804 can be combined with Type 2672 Metal butterfly valve Type 2675 Plastic butterfly valve Type 8804 Plastic ball valve The electric ball valve Type 8804 consists of an electrical rotary actuator and a 2/2-way or /2-way ball valve made of. 2-way variants are available with a 2-piece or -piece ball valve for various applications. The -way version is offered with L or T bore holes (on request). The rotary actuator is compactly built. It can be used also as single device for the operation of other control members (see datasheet Type 00). Technical ata Body material Stainless steel Seal material PTFE Medium Gaseous and liquid media, which do not attack the housing and sealing materials Medium temperature -10 to +10ºC Ambient temperature -10 to +55ºC Port connection -Threaded port G 1/4 to G2 1/2 -Weld end acc. to EN ISO 1127/ISO 4200 (on request) Operating pressure 0-6 bar: bar Connection between actuator Flange acc. to ISO 5211 and ball valve Operating voltage 24 V AC/C, V AC / Hz (other voltages on request) Voltage tolerance C: +/-20%; AC: +/-10% uty rating At max. torque: 50% of the time Electrical connection 2 cable glands ISO 20 Protection class IP65 Rotation angle 90º (+/-5º) Rotation time see ordering chart Limit switch 4 adjustable- max. 20 V / 5A 2 for motor and 2 voltage-free Elec. actuator material Cover Body Axis/Screws gearbox Installation ABS PA Stainless steel Steel, PC on t mount the actuator upside down p. 1/6
2 Electrical connection Switch drawings V AC/50-60 Hz multi-volt version Recommended Wiring - point mode N - T/E 1 2 ON Ph + ON -OFF Mode (failsafe version) N - T/E Open OFF Ph + Power Supply 1 2 on request ON/OFF required mode (failsafe version) S1-S A FC2 FC1 FCF FC0 Motor = feedback B V AC/C standard version N Ph - + AC or C OPEN CLOSE OPEN Suggested customer wiring FCO FCF FCO FCF FC1 FC2 Actuator wiring Symbol escription Symbol escription FCO Open limit switch iode FCF Close limit switch C Capacitor FC1 Auxilary 1 limit switch P Potentiometer FC2 Auxilary 1 limit switch H Heating resistor M Motor J7 Heating resistor connection T Thermal fuse J8 Potentiometer connector p. 2/6
3 imensions [mm] Ball Valve, 2-piece A A 1 X 2 X (1:1) Actuator N G A B B1 Ø E H K L L1 L2 L L4 P / Nm 1.0 / / / / / / / Nm / / / p. /6
4 imensions [mm] Ball Valve, -piece L Actuator N G A B B1 Ø E H K L L1 L2 L L4 P 10 1/ / Nm / / /4 12 / / / Nm / / / p. 4/6
5 Ordering chart (further versions on request) 2/2-way ball valve with threaded port connection Orifice (mm) Port connection (inches) Kv-value water (m /h) Pressure range (bar) 2-piece Pressure range (bar) -pieces Rotation time for 90º (s) Voltage Item no. 2-piece Item no. -piece 10 G 1/ G / V / 50 Hz 15 G 1/ G / G G 1 1/ V / 40 G 1 1/ Hz 50 G G 2 1/ on request G 1/ G / G 1/ G / G V/AC C G 1 1/ G 1 1/ G G 2 1/ on request i Further versions on request Positioner card with normal signal input 4-20 ma or 0-10 V Feedback through Potentiometer or 4-20 ma analog signal Slow rotation version -position actuator (90º or 180º) Heating resistor 10 W Accessories escription Item no. Key for adjustment of limit switches p. 5/6
6 Ball valve and butterfly valve - Request for quotation Please fill out and send to your nearest Bürkert facility* with your inquiry or order Company Contact person Note You can fill out the fields directly in the PF file before printing out the form. Customer No Address Postcode/Town epartment Tel./Fax Operating data Quantity Required delivery date Pipeline Pipe material Process medium Type of media Flow rate (Q, QN, W) 1) Media temperature Operating pressure N PN Liquid Steam Gas Min Standard Max Unit 1) Standard unit Liquid Q = m /h; Steam W = Kg/h; Gas QN = Nm /h Valve features Type Ball valve Butterfl y valve Body material Stainless PVC PP PVF other steel Seal material PTFE/EPM 2) PTFE/FKM ) EPM FKM other Nominal pressure Orifice PN N Type of connection Standard connection Flange True union Welded Int. thread Ext. thread Clamp ISO IN ANSI JIS other Pilot pressure min. max. 2) Only ball valve Mode of actuation Manual Pneumatic SFA: NC by spring action ouble-acting Electric actuator Function On/Off function Control actuator with analog signal input Power supply 20 V AC 24 V AC 24 V C other To find your nearest Bürkert facility, click on the orange box In case of special application conditions, please consult for advice Subject to alterations Christian Bürkert GmbH & Co. KG 0810/5_EU-en_ p. 6/6
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationFlow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
More information2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
More information2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More information2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way-Globe Valve with stainless steel design for media up to +180ºC, DN 13-50 High cycle life Flow optimised body in stainless steel 316L Deliverable with fl ow direction below or above seat Clean design
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More information2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25
2/2-way Diaphragm Valve with stainless steel design, weld end or clamp connection, DN 8-25 Type 2103 can be combined with Hermetical separation of fl uids from the operating mechanism by diaphragm Zero
More information2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN
2/2-way Globe Control Valve with stainless steel design for media up to +185ºC, DN 10-100 Type 2301 flange can be combined with Excellent control characteristics High cycle life Flow optimised body in
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More information2/2-way Diaphragm Valve, forged valve body, weld end and clamp connection, DN 8-100
2/2-way Diaphragm Valve, forged valve body, weld end and clamp, DN 8-100 Type 2031 with weld end Type 2031 can be combined with Type 2031 with clamp Hermetical separation of fluids from the operating mechanism
More informationFlow Controller, flow control system for gases
Flow Controller, flow control system for gases Highly cost effective solution, thanks to the integrated system Reliable, robust system Automatic process tune Simple to operate Type 8750 can be combined
More informationTandem valve, welded valve configuration
Tandem valve, welded valve configuration Fully integrated in Bürkert s Process Control Systems Quality certifications Type 2034 can be combined with... Type 6012 Solenoid banjo valve Stroke limitation
More informationPneumatically operated zero dead volume T-Valve CLASSIC
Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular
More information2/2-way Globe Control Valve, threaded port connection, DN 10-65
2/2-way Globe Control Valve, threaded port connection, DN 10-65 Type 2712 can be combined with... Classic design with interchangeable trims, 3 to 5 Kvs-value per connection port Excellent control characteristic
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More informationBall Valves in cast 316 SS multi-port, bolted construction
65 Ball Valves in cast 36 SS, bolted construction Type 65 can be combined with 800 PSI WOG Thread, socket and butt weld ends Full port to Sch 40 pipe 3/4/5 ports in L, X, T or I pattern Range of seal options
More information2/2 way Globe Control Valve, threaded connection, 3/8" 3"
2/2 way Globe Control Valve, threaded connection, 3/8" 3" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More information2/2 way Globe Control Valve, flange connection, 1/2" 4"
2/2 way Globe Control Valve, flange connection, 1/2" 4" Complete Burkert system using Type 2712 with TopControl 8630 New generation with interchangeable trims, 3 to 5 Cvs value per connection port Excellent
More information2/2 and 3/2-way ball valve with pneumatic rotary actuator
2/2 and 3/2-way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow
More information2/2 or 3/2 way ball valve with pneumatic rotary actuator
2/2 or 3/2 way ball valve with pneumatic rotary actuator Pneumatic rotary actuator Stainless steel ball valve External regulation of the pistons Full bore Type 8805 can be combined with Favourable flow
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way ngle-seat Valve with stainless steel design for media up to +180ºC, DN 13-50 Excellent control characteristic and high fl ow rates High cycle life Clean design for optimal use in hygienic environment
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationINSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
More informationType Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
More informationFlowmeter for Gases. Type Type can be combined with... Type 8802-YG Process control valve. Type 5281 Solenoid valve
Flowmeter for Gases Thermal mass flow measurement Pipe sizes up to 2" Integrated inlet and outlet pipes for flow conditioning -20mA signal output of process value Type can be combined with... Type 8802-YG
More information2/2-way Compact Solenoid Valve, G 1/4 - G 1/2
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 Stainless steel body Type 6027 Compact can be combined with Direct-acting, normally closed Brass and stainless steel body Electrical connection cable plug
More information2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
More informationPneumatically operated zero dead volume T-valve ELEMENT for decentralized automation
Pneumatically operated zero dead volume T-valve ELEMENT for decentralized automation Zero deadleg monoblock without welds Diaphragm hermetically separates the fluids from the operating mechanism Easy integration
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More informationBall Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
More informationPneumatically operated 2/2 way diaphragm valve with stainless steel actuator
Pneumatically operated 2/2 way diaphragm valve with stainless steel actuator Flow optimized and deadleg free stainless steel cast or forged bodies Media separation with different diaphragm materials Trusted
More informationPneumatic control unit for decentralized automation of ELEMENT process valves
890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing
More information2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 6124 can be combined with...
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More informationButterfly Valve K 220 for application in the harsh environment of the chemical industry
Butterfly Valve K 220 for application in the harsh environment of the chemical industry Advantage DN 20 to DN 400 liner as a element liner makes additional flange seals superfluous cost efficient and direct
More information2-way Diaphragm Control Valve, forged stainless steel body, pneumatically operated, port connection DN
Type 2731 can be combined with... 2-way Diaphragm Control Valve, forged stainless steel body, pneumatically operated, port DN 15-100 Hermetical separation of fluids from the operating mechanism by diaphragm
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationElectrical position feedback for actuator sizes Ø mm
Electrical position feedback for actuator sizes Ø 40-125 mm Type 1062 can be combined with Simple installation, convertible or retrofittable Self-adjusting trip cam for closed position LEDs provide local
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More information2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam
cryogenic extended stem 2/2-way Angle-Seat Valve for high-quality cryogenic applications and steam Type 2000 can be combined with Spring return closed or open, double-acting, manual operation Materials:
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationSimple float switch TCL001/8181
Simple float switch Switch for neutral and aggressive liquids NO/NC, alternating Reed contact Vertical or horizontal mounting Molded lying leads (Type 8181) or cable (Type TCL001) Float switch with hermetically
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More informationInductive conductivity meter
Inductive conductivity meter Type 8228 can be combined with... Configurable outputs: up to 2 transistor and up to 2 analog 4... 20 ma outputs Removable backlighted display Simulation of process values
More information2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationPneumatic operated 2/2-way Diaphragm Valve
Pneumatic operated 2/2-way Valve Light tube valve body Flow optimised body in stainless steel Zero dead volume Easy to weld Type can be combined with... Type 8640/8644 Type 6012/6014 P Type 8311 Electrical
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationPositive displacement flowmeter for continuous flow measurement
8070 Positive displacement flowmeter for continuous flow measurement High accuracy Medium with high viscosity Mounting and dismounting of the electronics by a quarter-turn Connection to Bürkert devices
More information410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationBall valve C 16. Nominal size DN Nominal size 2 6 Nominal pressure PN 6 10 bar.
Ball valve C 16 Nominal size DN 50 150 Nominal size 2 6 Nominal pressure PN 6 10 bar Features Special ball valve with fully encapsulated valve ball extremely low clearance volume high actuation reliability
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationAccessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
More informationRobolux Multiway Multiport Diaphragm Valve, standard product range
Robolux Multiway Multiport Diaphragm Valve, standard product range Increased process efficiency Reduced installation costs Reduced number of valves and welds Zero dead volume and no contamination Type
More informationBall valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Nominal size DN 0 50 Nominal size /8 Nominal pressure PN 0 6 bar C
More information2/2 or 3/2-way Miniature Rocker Solenoid Valve
2/2 or 3/2-way Miniature Rocker Solenoid Valve Type 0127 can be combined with... For maximum chemical resistance requirements Compact design with mm width and Cv ratings up to 0.08 Proven reliability since
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationDirect-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
More informationBall valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C 0 valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and cannot be flushed
More informationCompact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe
Compact Electric Actuated Ball Valves PVC Body, Teflon/EPDM Seals 1/2 to 1 inch Pipe SERIES Features Industrial quality miniature actuator Industrial grade True Union ball valve Visual valve position indicator
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More informationBall Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ motorized plastic diaphragm valve has a low maintenance electric actuator and a reversible synchronous motor. It is operated via a non-self-locking reduction
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More informationAngle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationAirLINE and AirLINE Quick electrical/pneumatic Automation System
AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility
More informationINSERTION flowmeter with paddle wheel, ELEMENT design
INSERTION flowmeter with paddle wheel, design Up to PN, size of measurement pipes: DN to DN400 Configurable outputs: one or two transistor output(s) and single or dual 4... ma analog output(s) Removable
More informationCable Plug acc. to DIN EN , Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationElectromotive process valve - 2-way angle-seat control valve
Electromotive process valve - 2-way angle-seat control valve good and fast control weather, impact and vibration resistant design easy cleaning by its design according hygienic demands options many diagnostic
More informationServo-assisted 2/2 way piston valve
Servo-assisted 2/2 way piston valve Type 6240 can be combined with Servo-assisted and compact piston valve with diameter of up to N12 Vibration-resistant, screwed coil system Increased leak-tightness with
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 100 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable ball seat
More informationGlobe Valve, Metal. Sectional view
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationInsertion magnetic inductive flowmeter
Insertion magnetic inductive flowmeter Sensor without moving parts Flowmeter with On/Off control Application related calibration by Teach-In function Clean in place (CIP) FDA-compliant materials Type 8041
More informationVALVES WITH SA ELECTRIC ACTUATOR
505-507 VALVES WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 505+SA and 507+SA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationBall valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
More informationControl Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
More informationBall Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationDirect-acting 2/2- or 3/2-way pivoted armature valve
0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil
More informationRight Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
More information