Door Handle Gate System

Transcription

1 Door Handle Actuator Overview XW Series E-Stops Key features: Easy and secure operation Rattling doors can be locked smoothly and securely. A door can be locked with an actuator by pushing and turning the handle. Padlock tab is provided to ensure operator safety. Interlock switch with or without solenoid lock can be installed. LED shows solenoid status (when using HS5E- L -G). Enabling Switches Part Numbers Description Ordering Type No. Remarks Handle Unit For right-hand door For left-hand door Choose according to the required opening side. Switch Cover Unit HS9Z-DH5C Used for installing the interlock switch inside. HS5B Installation Kit HS9Z-DH5B Contains a mounting plate and two spacers. HS9Z-FL5 Contains a button with base plate Mounting panel thickness (X): 20 X 0mm 2 Button Kit 1 HS9Z-FL5 and a connecting rod Mounting panel thickness (X): 0 X 0mm 2 1. Use the kit in combination with the HS5E- L -G rear unlocking button type interlock switch. 2. Mounting panel is a frame or a panel. Parts Description Safety Control Relays Padlock Knob Blind Cap Handle Unit (for right-hand door) Front Handle Switch Cover Unit Light Curtains Manual Unlock Label Interlock Switch AS-Interface Safety at Work Front View Rear View

2 Specifications Applicable Interlock Switch HS5B Metal Head Interlock Switch 1 HS5E Button Type Interlock Switch with Solenoid 2 Operating Temperature 25 to 0 C (no freezing) Mechanical Durability 0,000 operations minimum Applicable Shackle Diameter of Padlock ø6 to.5 mm Withstand Load of Padlock Tab 0N maximum Handle Operation Angle (removed position inserted position) Insulation Resistance (500V DC megger) Between live and dead metal parts: 0 MΩ minimum Between terminals of different poles: 0 MΩ minimum. Rotational handle actuator can be inserted/removed smoothly on rattling doors. Conventional Sliding Actuator IDEC's Door Handle Actuator Rattling doors can be locked smoothly and securely. The door can be locked and unlocked by pushing and turning the handle. The actuator can be inserted into the interlock switch by pushing and turning 2 Turn the front handle. The actuator can be removed from the interlock switch by turning the front handle. 1 Push Padlockable tab ensures operator s safety. When padlocks are installed on the padlock tab, the machine cannot be started because the actuator entry slot is blocked and the actuator cannot enter the interlock switch. By requiring all operators to have their own padlock and installing them on the door handle actuator before entering the hazardous area, the door will not be closed unless all padlocks are removed i.e. all operators have left the hazardous area. Note: Operators must observe rules in the workplace in order to ensure safety. Residual risk such as failure to install padlocks must be taken into consideration. Interlock switch with/without solenoid locking can be selected. HS5E Because the handle can be turned only while it is pushed, the actuator is prevented from hitting the switch cover unit. (HS5E- L -G) HS5B (HS5B- Z) The rear handle can remove the actuator, but cannot insert the actuator. Padlock Tab Padlock Knob 1. HS5B- ZB, HS5B- ZBM 2. HS5E- L -G Interlock switch is not supplied with the actuator and must be ordered separately. For the specifications of interlock switches, see pages XX, XX, and XX. Sliding doors can also be locked securely. Using a hasp Overview XW Series E-Stops Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work IDEC (2) USA & Canada 5

3 Door Handle Actuator Configuration Overview Switch Cover Unit XW Series E-Stops HS5E- L -G Button Type HS5B- Z Metal Head Type HS9Z-DH5C Selection Chart Door Size Large With Lock Required Mounting Panel Thickness (X) X mm Enabling Switches 20 X 0 mm Safety Control Relays 0 < X 0 mm Light Curtains Without Lock X 0 mm AS-Interface Safety at Work Small With Lock Without Lock 6

4 Handle Unit Handle Unit Switch Cover Unit Accessories Interlock Switch Sliding Actuator HS9Z-SH5 HS9Z-DH5C Accessories Button Kit HS9Z-FL5 HS9Z-FL5 Button Kit HS9Z-FL5 Button Kit HS9Z-FL5 HS5B Installation Kit HS9Z-DH5B HS5B Installation Kit HS9Z-DH5B HS5E- L -G ( Button Type) HS5B- Z (Metal Head Type) HS5E (All types) HS5B- Z (Metal Head Type) Overview XW Series E-Stops Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work IDEC (2) USA & Canada

5 Overview Dimensions (mm) (right-hand door) and HS5E- L -G Interlock Switch with Solenoid Button Connecting Rod () ø. 9. Diecast Aluminum (plated) Rear Handle (diecast aluminum) (yellow) Handle Link Shaft (free-cutting steel) Legend Description 1 Handle Unit 2 Switch Cover Unit HS9Z-DH5C Button Kit HS9Z-FL5 Interlock Switch HS5E- L -G XW Series E-Stops Polyacetal 9. 6 Diecast Aluminum (plated) to Front Handle (diecast aluminum) Unlocked: Locked: 1 Mounting Panel Thickness: 20 to LOCK UNLCOK Enabling Switches Safety Control Relays Light Curtains (left-hand door) and HS5E- L -G Interlock Switch with Solenoid Mounting Panel Thickness: 20 to 0 9 Unlocked: Locked: 1 Rear Handle Diecast Aluminum (diecast aluminum) (plated) (silver) (yellow) Handle Link Shaft (free-cutting steel) 2 Rear Handle (diecast aluminum) to Button Connecting Rod () 9. ø. Diecast Aluminum (plated) (silver) 9. 6 Polyacetal Button (Nylon 66) (red) Legend Description 1 Handle Unit 2 Switch Cover Unit HS9Z-DH5C Button Kit HS9Z-FL5 Interlock Switch HS5E- L -G AS-Interface Safety at Work 1 LOCK UNLOCK 2 But (Nylon 66) (red)

6 LOCK UNLOCK LOCK UNLOCK (right-hand door) and HS5B- Z Interlock Switch Polyacetal to Diecast Aluminum (plated) (silver) Diecast Aluminum (plated) (silver).5 12 Rear Handle (diecast aluminum) (yellow) Handle Link Shaft (free-cutting steel) Front Handle (diecast aluminum) 1 2 Mounting Panel Thickness: 0 mm or less Unlocked: Locked: 1 (left-hand door) and HS5B- Z Interlock Switch 9 Mounting Panel Thickness: 0 mm or less Unlocked: Locked: 1 Rear Handle (diecast aluminum) (yellow) Handle Link Shaft (free-cutting steel) 2 Rear Handle (diecast aluminum) 1 Diecast Aluminum (plated) (silver) 9. to Diecast Aluminum (plated) (silver) 21 Polyacetal (9.5) 1 1 Legend Description 1 Handle Unit 2 Switch Cover Unit HS9Z-DH5C HS5B Installation Kit HS9Z-DH5B Interlock Switch HS5B- Z Legend Description 1 Handle Unit 2 Switch Cover Unit HS9Z-DH5C HS5B Installation Kit HS9Z-DH5B Interlock Switch HS5B- Z 1 Overview XW Series E-Stops Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work IDEC (2) USA & Canada 9

7 UNLOCK Overview Panel Cut-out right-hand door handle unit to 9 6 to to 16 1 to 20 to 20 (.5) ( to 9) (26) XW Series E-Stops When using the HS5E- L -G on the mounting panel of mm or less in thickness (use the rear unlocking button). When using the HS5B- Z (mounting panel thickness X 0mm). Button Hole ø22 to 0 (Note 1) 26 Door gap 6-M <Front View> Rear Handle Hole ø26 to 0 (Note 2) (2) 2-M5 Door gap <Rear View> Mounting Position Tolerance 0. Reference to 9 2 Reference 6 to 6 6 to 16 to 9.5 to 20 1 to 20 (.5) ( to 9) (26) Enabling Switches When using the HS5E- L -G on the mounting panel of 20 to 0 mm in thickness. Use the rear unlocking button kit (HS9Z-FL5 ). In the figure shown on the right, 0mm frame is used. left-hand door handle unit Button Hole ø22 to 0 (Note 1) Rear Handle Hole ø26 to 0 (Note 2) 11 to 1 ( to 1) Safety Control Relays Light Curtains Door Gap (6)-M5 <Front View> (2) (6)-M5 0 0 <Rear View> Door Gap LOCK When using the HS5E- L -G on the mounting panel of mm or less in thickness (use the rear unlocking button). When using the HS5B- Z (mounting panel thickness X 0mm). When using the HS5E- L -G on the mounting panel of 20 to 0 mm in thickness. AS-Interface Safety at Work Use the rear unlocking button kit (HS9Z-FL5 ). In the figure shown on the right, 0mm frame is used. Note 1: Required when using the HS5E- L- -G. Not required when using the HS5B- Z (without locking function). Note 2: Ensure that the hole in the mounting panel does not interfere with the rear handle shaft. 60

8 Button Kit (HS9Z-FL5/HS9Z-FL5) (Use with the HS5E-*L**-G Interlock Switch) HS5E- L -G Interlock Switch (sold separetely) Connecting Rod () Screws (iron) Mounting Bracket () HS5B Installation Kit (HS9Z-DH5B) ø. Note: The illustration kit contains the aluminum mounting plate shown above and two spacers. 6 -R5 ø. ø0 Pin () A606 Anonized Hinge Plate () Button pressed (unlocked) Button unpressed Total thickness of mounting panel: 20 to ø22 to 0 Button Hole Button Kit Mounting Hole Layout 2 or -M Screws to 0 For more information, download instruction sheet from web. Overview XW Series E-Stops Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work IDEC (2) USA & Canada 61