Installation Trunking

Transcription

1 P83865 Description INKA aluminium installation system is intended for mounting directly onto the wall or on brackets, on fl oor or desk level; some sizes also for fl ush mounting. The range includes with one or two compartments. The twocompartment base is provided with an integrated and removable partition wall, pre-punched every 200 millimetres. INKA system is well suited for all types of applications, thanks to the broad range of form-pieces (internal and external corners, 90 bends and T-pieces) and accessories. The base can be divided into compartments by cable shelves, which allows segregation of power and low voltage cables. The standard INKA is delivered in 2.5 m lengths, natural anodized or powder coated. Other lengths (max. 5.0 m) and/or colours are available on request. Compatibility INKA are compatible with wiring devices CYB, outlet boxes MIB, front covers FCA, brackets TTA and accessories TTI. Technical data Standards and certifi cates The products comply with the standard EN The products satisfy the provisions for CE marking according to the Low Volage Directive 73/23/EEC and 93/68/EEC. The products comply with the RoHS directive 2002/95/EC (Restriction of Hazardous Substances) Material and operative data Material, SS:4104, DIN Al Mg Si 0,5, BS:H9 Density 2.7 g/cm 3 Linear expansion 24x10 6 / C Surface treatment anodizing Powder coating Colour spec B91G acc. to customer choice (see Colour Choice). Temperature range From 20 C to +60 C Suitable outdoors No Degree of protection IP20 Mounting instruction Art.No / INKA-101, INKA-152 Art.No / INKA-123, INKA & -3, INKA Art.No / INKA-123-4, INKA-161-2F Art.No / INKA-165W Mounting instructions are always included with the length material. Mounting instructions are also available on Pl@net. 1 (11)

2 Design and dimensions Exploded view INKA-101 INKA-123 INKA S R32430 R32485 R INKA-152 INKA INKA R33180 R37780 INKA-161-2F R32500 R32780 INKA-165W R33170 R32780 INKA Front covers F80 2. Socket outlet box 3. Cable shelf 4. Sound insulation strip 5. Wall collar Jointing pieces 7. Wall bracket 8. Ventilation ribs Other parts, see range tables. 2 (11)

3 Trunking base P61445 P61398 P61397 P61399 Trunking base, one compartment Trunking base for wall surface mounting or on brackets. Can be divided into compartments by cable shelves. To be used together with a front cover. Intended mainly for installation at mid-wall (window-sill) or skirting level. INKA-U101 INKA-U123 INKA-U152 INKA-U /72/ /72/ /52/ /72/ L63870 INKA-U165W 165/52/ P61399 Same as above but in optional length, unit metre. INKA-U /72/ P61397 INKA-U /72/ P61398 INKA-U /52/ P61403 Trunking base, two compartments Trunking base for wall surface mounting or on brackets. Divided into an upper and a lower compartment by an integrated partition wall, which is pre-punched every 200 mm. Can be divided into further compartments by cable shelves. To be used with 80 mm front cover. Intended mainly for installation at mid-wall (window-sill) or skirting level. INKA-U /72/ P61402 INKA-U /72/ P61403 Same as above but in optional length, unit metre. INKA-U /72/ P61401 P61400 Trunking base with flange, one compartment Trunking base with flange for mounting fl ush with the wall. Can be divided into further compartments by cable shelves. Also suitable for use as feeder. INKA-U /72/ Same as above but in optional length, unit metre. INKA-U /72/ Trunking base with flange, two compartments Trunking base with flange for mounting fl ush with the wall. Divided into an upper and a lower compartment by an integrated partition wall, which is pre-punched every 200 mm. Can be divided into further compartments by cable shelves. Also suitable for use as feeder. INKA-U161-2F 161/72/ (11)

4 Corner sections P61483 P61439 P61435 Internal corner Internal corner with 80 mm front opening. Can be divided into compartments by cable shelves. To be used together with front cover. INKA-IH101 INKA-IH123 INKA-IH /200/200* /200/200* /200/200* P61485 INKA-IH /200/200* P61467 INKA-IH /200/200* L63890 INKA-IH165W 165/200/200* P61431 Internal corner with 80 and 40 mm front openings. Divided into an upper and a lower compartment by an integrated partition wall. Can be divided into further compartments by cable shelves. To be used together with front cover. INKA-IH /200/200* P61484 INKA-IH /200/200* P61438 P61433 External corner kit External corner kit with 80 mm front opening, including front cover. Can be divided into compartments by cable shelves. INKA-YH /200/200* INKA-YH /200/200* P61436 INKA-YH /200/200* P61480 INKA-YH /200/200* L63900 INKA-YH165W 165/200/200* P61432 External corner kit with 80 and 40 mm front openings, including front covers. Divided into an upper and a lower compartment by an integrated partition wall. Can be divided into further compartments by cable shelves. INKA-YH /200/200* P61481 INKA-YH /200/200* * Wall-side measure. 4 (11)

5 Bends P61434 P61430 Bend, 90, kit 90 bend with 80 mm front opening. Kit including 225 mm front cover. Can be divided into compartments by cable shelves. Some sizes available as a riser or a dropper. INKA-LSN /72/ Dropper INKA-LSU101 INKA-LS /72/ /72/ P61391 INKA-LSU /52/ L61528 INKA-LSU /72/ L63910 INKA-LS165W 200/52/ P61390 P bend with 80 and 40 mm front openings. Kit including 225 mm front cover. Divided into an upper and a lower compartment by an integrated partition wall. Can be divided into further compartments by cable shelves. Available as a riser or a dropper. INKA-LSN161-2 Dropper INKA-LSU /72/ /72/ T-piece, kit T-piece with 80 mm front opening. Kit including 225 mm front cover. Can be divided into compartments by cable shelves. Some sizes available as a riser. INKA-TSU /72/ P61952 INKA-TS /72/ P61437 INKA-TSU /52/ L63920 INKA-TS165W 260/52/ P61490 T-piece with 80 and 40 mm front openings. Kit including 225 mm front covers. Divided into an upper and a lower compartment by an integrated partition wall. Can be divided into further compartments by cable shelves. Available as a riser. INKA-TSU /72/ (11)

6 Other accessories P61508 P61939 P61424 P61427 Stop end Stop end intended to cover the ends of the base. Available as left-hand and right-hand type for INKA Material: ABS or. INKA-ES101 ABS INKA-ES101 INKA-ES123 ABS INKA-ES123 INKA-ESH123-4, right INKA-ESV123-4, left INKA-ES152 Grey Grey Alu metallic 103/33/ /26/ / / /27/ /72 145/ /52/ P61898 P61429 P61505 P61953 L63880 P INKA-ES161 ABS INKA-ES161 INKA-ES165W INKA-ES217-2 ABS INKA-ES217-2 Grey 165/75/ /72/ Alu metallic 165/52/ Grey 220/ / /28/ Stop end intended to cover the ends of the base. With fl ange for fl ush mounting. INKA-ESV161-2F 184/ Left-hand INKA-ESH161-2F 184/ Right-hand Wall collar Wall collar to be used when the passes through a wall. May also be used when the ends against the wall. Material: ABS. INKA-R2 for 123 INKA-R2 for Grommet 253/ / / / Grommet to be used for protection of the cable when it passes through a drilled hole in the. Material: PA. INKA-GF19 White Ø P61752 Jointing pieces Clamp for jointing and earthing of the base. To be mounted in the jointing slot of the. INKA-SSA 8/32/ P67863 INKA-SSJ 8/32/ (11)

7 Compatible accessories FCA Front covers P61883 Front cover for service carriers with 40 and 80 mm front opening respectively. Material:, natural anodized or powder coated. FCA-F40 anodized 40/13/ P61884 FCA-F80 anodized 80/13/ P61885 PVC Front covers Front cover for service carriers with 80 mm front opening. Material: PVC. FCA-F80 80/13/ Front cover brace Front cover brace for front covers F40 and F80 respectively. Used to maintain correct front cover retention in cases of heavy cable loads. Material: Steel, electroplated. FCA-B40 10/14/ FCA-B80 10/14/ Compatible accessories TTA P61880 Adjustable wall brackets Adjustable wall bracket for wall-mounting of. Suitable for use together with ventilation-rib holder kit TTA-GH1 or rib holder TTA-GH6. Material: Steel, unpainted/. TTA-TN /67/ TTA-TN /67/ TTA-TN /67/ TTA-TN /67/ P Adjustable wall bracket including loose plastic rib holder TTA-GH1 with steel clamp, for wall-mounting of. The loose rib holder is suitable for ventilation ribs TTA-G10 and TTA-G3. Material: Steel, unpainted, PC/ABS. TTA-KVS60A /30/ Fixed wall bracket Fixed wall bracket for wall-mounting of. Material:, untreated. TTA-KV15 113/23/ TTA-KV35 130/43/ P61394 Fixed wall bracket with integrated rib holder Fixed wall bracket with integrated rib holder, for wall-mounting of. The integrated rib holder is suitable for ventilation rib TTA-G10. Material:, untreated. TTA-KV /43/ TTA-KV /64/ TTA-KV /86/ TTA-KV /109/ TTA-KV /131/ TTA-KV /153/ (11)

8 Compatible accessories TTA Fixed wall bracket with loose rib holder P61520 P61393 Fixed wall bracket including loose plastic rib holder TTA-GH1 with steel clamp, for wall-mounting of. The loose rib holder is suitable for ventilation ribs TTA-G10 and TTA-G3. Material:, untreated, PC/ABS. TTA-KV35 132/43/ TTA-KV56 132/64/ TTA-KV79 132/86/ TTA-KV /109/ TTA-KV /131/ TTA-KV /153/ P61938 P61406 P61940 P61520 P61520 Ventilation-rib holder Rib holder to fix ventilation ribs G3 and G10 on the wall brackets. Suitable for TTA-TN, TTA-KV and TTA-KVS. Material: PC/ABS. TTA-GH6 Grey 15/120/ Ventilation-rib holder, kit Kit including 10 plastic rib holders and 10 steel clamps, to be used to fi x ventilation ribs G3 and G10 on the wall brackets. Suitable for TTA-BT, TTA-TN, TTA-WG, TTA-KV and TTA-KVS. Material: PC/ABS (rib holder), steel (clamp). TTA-GH1 Grey 15/120/ Ventilation rib Ventilation rib to be used together with wall bracket for and ventilation-rib holder. Material:, natural anodized or powder coated. TTA-G3 Anodized 20/3/ TTA-G10 Anodized Jointing pieces 20/10/ Jointing piece to be used for jointing of ventilation ribs. Material:, untreated. TTA-GS3 9/6/ P61751 TTA-GS10 13/10/ P61516 Washer Washer to be used between bracket and wall or and wall, to compensate for uneven walls. Material: PP. TTA-KM3 Grey 114/3/ TTA-KM5 Grey 114/5/ Compatible accessories TTI P83661 Internal corner, adjustable Open internal corner that covers the opening between two lengths installed in an angle to one another. The corner section is made up by two parts which can be moved against one another to create the required angle. Angle adjustment Degree of protection: IP40, provided that the system is mounted direct on the wall. For TTI-IH123, covering plate TTI-BP can be used to reach IP20 when the system is mounted on brackets. Material: PC/ABS. TTI-IH100 White RAL 9016 TTI-IH123 White RAL /52/ /72/ (11)

9 Compatible accessories TTI External corner, adjustable P83662 L68060 Open external corner that covers the opening between two lengths installed in an angle to one another. The corner section is made up by two parts which can be moved against one another to create the required angle. Angle adjustment Degree of protection: IP40, provided that the system is mounted direct on the wall. For TTY-IH123, covering plate TTI-BP can be used to reach IP20 when the system is mounted on brackets. Material: PC/ABS. TTI-YH100 White RAL 9016 Alu metallic TTI-YH123 White RAL 9016 Alu metallic Covering plate 100/52/ /72/ Covering plate for internal and external corners TTI-IH/YH123. The covering plate is snapped into the length and covers the opening behind internal and external corners. By using this plate, IP20 degree of protection will be reached when the is mounted on brackets. Suitable for installation size 123x72. Material: PE. TTI-BP White 112/35/ P61735 P61747 Joint cover piece, kit Joint cover kits including two or three joint cover pieces to cover joints between sections. Material:, untreated, anodized or powder coated. TTI-US100 For 52 mm deep TTI-US101 /45/ /45/ P61748 TTI-US123 White RAL 9016 /45/ P61740 TTI-US161-2 /45/ P61743 TTI-US161-3 /45/ P61744 TTI-US217-2 /45/ P61750 P61423 Bracket for stop end Bracket for extra strong fixing of stop ends for INKA. Material: Sheet steel. TTI-FE 35/34/ Single cable shelf Single cable shelf to be used to divide the into compartments, for the separation of cables. Material: PVC, PC/ABS or aluminium, see below. TTI-KH52 White PVC 10/46/ For 52 mm deep P61405 TTI-KH72 Anodized aluminium White PVC 12/62/ (11)

10 Compatible accessories TTI Double cable shelf P62067 Double cable shelf to be used to divide the into compartments, for the separation of cables. Material: PVC, PC/ABS or aluminium, see below. TTI-KH252 White PVC 58/46/ For 52 mm deep P61404 P61936 TTI-KH272 TTI-KH272C White PVC 64/59/ White PC/ABS 64/59/ Cable clip Cable clip to be snap-fitted onto the cable shelf, used to retain the cables in their place. Material: PA (TTI-KL52), ABS (TTI-KHK). TTI-KL52 Black 13/25/ For TTI-KH252 P61514 TTI-KHK For TTI-KH72 Brown 6/43/ P61881 P61937 P61897 Mounting washer Mounting washer provided with screw hole for mounting to the wall by means of a countersunk screw. The mounting washers are to be placed on the wall along a chalk lining. The is then easily hung on the mounting washers and screw-fi xed directly to the wall. Suitable for INKA-123, 161-2, and Material: PA, injection moulded. TTI-MB Black 5/15/ Cup washer Cup washer to cover screw heads inside the in order to to protect single-insulated cables. Material: PE. TTI-KB Black Ø Earthing clamps Earthing clamp for aluminium and accessories. To be turned into the earthing slot of the. Intended for an area of max. 4 mm 2. Material: Steel, zinc coated. TTI-JB 18/12/ P90900 Earthing clamp to be used to connect a flat pin to the earthing slot of aluminium. The earthing clamp is fi xed in the earthing slot by turning it 90 with a screwdriver. Material: Stainless steel. TTI-JB2 12/11/ L32120 Earth wires Earth wire to be used to bond the front cover to the base. Material: Copper (conductor). TTI-JK300 Yellow/green Length P93575 Earth wire including cable clip, to be used to bond the front cover to the base. The cable clip has an extra connection for an additional cable clip. Material: Copper (conductor). TTI-JKE300 Yellow green Length P85795 Earth wire including cable clips, to be used to bond the front cover to the base. Material: Copper (conductor). TTI-JKF300 Yellow/green Length P61537 Sound insulation strips Sound insulation strip to be used for sound absorbing up to 53 db when a passes through a wall. Supplied in a set of four for up to four compartments. Material: Foam plastic. TTI-T3045 Black 30/45/ TTI-T5070 Black 50/70/ (11)

11 Compatible accessories TTI Wall frames P61428 P61429 Wall frame made up by two parts which are assembled and mounted on the by means of two rubber mouldings. The frame has a fl ange against the. To be used to cover a passage through the wall or to make an attractive fi nish of the against a wall. Material: ABS. TTI-CR100 For 100x52 mm TTI-CR123 For 123x72 mm TTI-CR161 For 161x72 mm Wall collars 170/25/ /25/ /25/ Wall collar made up by two parts that are snapped together. To be used to cover a passage through the wall or to make an attractive finish of the against a wall. Material: ABS. TTI-R /2.5/ P81524 TTI-R /8/ P61429 TTI-R /8/ TTI-R /8/ (11)