Ventilation Grille PA
|
|
- Avis Carpenter
- 6 years ago
- Views:
Transcription
1 Ventilation grille PA Ferdinand Schad KG Steigstraße D Kolbingen Telephone +49 (0) Fax +49 (0) info@schako.de
2 Contents Description...3 Construction... 3 Model... 3 Accessories... 4 Fastening... 4 Models and dimensions...5 for wall and ceiling mounting and installation in ventilation ducts... 5 for floor mounting Dimensions of accessories Fastening methods Technical data Pressure loss and noise level Maximum end velocity of jet Jet path Critical throw Maximum penetration Induction ratios and temperature ratios Minimum distances Legend Order details of PA-1 / PA-2a / PA-2b / PA-2c / PA Order details of PA-3 / PA-5 / PA-6 / PA Order details of PA-R / accessories of PA Specification texts /14-2
3 Description The ventilation grille PA is suitable for use in supply and return air installations and for installation in walls, ceilings, floors and ventilation ducts. For air deflection, horizontal or vertical (for floors only), fixed blade profiles are attached at the front side. For wall mounting, basic type PA...-1 with concealed mounting (-VM, standard) or screw mounting (-SM) is suitable. The basic type PA...-3 with concealed mounting (-VM) and the model PA- R with concealed mounting (-VM) are suitable for floor installation. According to the required air throw pattern, the blade profile of the basic types PA..-1 and PA...-3 can be selected from three different blade profiles (PAZ standard, PAG and PAS). The blade spacing of basic types PA...-1 and PA...-3 for nonwalk-on and non-ball-impact-resistant use is 13 mm (standard), while for walk-on (only PA3) and ball-impact-resistant use (acc. to DIN 18032, Part 3) it is 8 mm. The blade spacing for model PA-R with roll-down grille is 10 mm. The blade insert can be removed for cleaning purposes (only PA3 / PA-R) The basic type PA consists of a narrow front frame and blades made of aluminium extrusion profile natural colour anodized. The standard blade spacing is 13 mm, optionally 8 mm. This grille type is generally neither walk-on nor ball-impact-resistant. At an extra charge, a plenum box (for PA...-1 / PA...-2a only) can be mounted (only available without hit-and-miss damper). The damper in the connection piece of the plenum box (by additional charge) serves for easy air volume regulation. The technical data apply to all models. Construction Louvre grid - Blade profile: PAZ (standard), PAG, PAS - Louvre spacing: - 13 mm (standard) - 8 mm - Blades made of extruded aluminium profile, natural colour anodised (E6/EV1), at an extra charge specially anodised or painted. Roll-down grille PA-R - Profiled blades made of anodised natural colour aluminium (E6/EV1) - Blade connector consisting of plastic Frame - Extruded aluminium profile, natural colour anodised (E6/ EV1), at an extra charge specially anodised or painted. Hit-and-miss damper - made of electrolytically galvanised sheet steel Droplet-forming blade - made of extruded aluminium profile, natural colour anodised (E6/EV1), at an extra charge specially anodised or painted. Model PA front-side horizontal fixed blade profiles for wall mounting, ceiling mounting and installation in ventilation ducts PA...-2a - same as PA...-1, additionally with individually adjustable vertical droplet-forming blades PA...-2b - same as PA...-1, additionally with hit-and-miss damper PA...-2c - same as PA...-1, additionally with individually adjustable vertical droplet-forming blades and hit-andmiss damper PA Supply air and return air grilles, front-side, horizontal, fixed blade profiles, with narrow frame profile, for wall, ceiling and ventilation duct installation PA removable blade insert consisting of horizontal, fixed blade profiles for floor installation PA same as PA...-3, additionally with individually adjustable vertical droplet-forming blades PA same as PA...-3, additionally with individually adjustable vertical droplet-forming blades and hit-andmiss damper PA same as PA...-3, additionally with hit-and-miss damper...z - Blade profile lightweight model, diagonal throw (standard)...g - Blade profile compact model, straight throw...s - Blade profile compact model, diagonal throw Louvre spacing 13 mm (standard) not safe to step on, not ball-impact-resistant Louvre spacing 8 mm - with PA-1 to PA-2c with concealed mounting (- VM, standard), not ball-impact-resistant according to DIN Part 3 - with PA-1 to PA-2c with screw mounting (-SM), ball-impact-resistant according to DIN Part 3 - with PA-3 to PA-7 with concealed mounting (-VM) walk-on and ball-impact-resistant according to DIN Part 3 PA-R - Roll-down grille made of vertical fixed profiled blades for floor installation, walk-on, louvre spacing 10 mm, as band design. Note: For walk-on floor-mounted grilles in band design, which are used in wet areas (e.g. swimming pools, barefoot areas), SCHA- KO recommends the roll-down grille PA-R. 01/14-3
4 Accessories Plenum box (-ASK) (only for PA...-1 / PA...-2a / PA...-10) - Galvanised sheet steel - with connection spigot: - sideways (-AS1, standard) - from above (AS2) - front side (-AS3) Damper (-DK, for ASK-AS1) - in plenum box - Throttle damper made of galvanised sheet steel - Damper fastening made of plastic Rubber lip seal (-GD) - Special rubber, on plenum box adapter Corner angle 90 (-ES) - with dummy plate made of galvanised sheet steel painted to RAL 9005 (black) (only for PA...-3 / PA...-5 / PA...-6 / PA / PA-R-RP) - with dummy plate made of Zincor painted to RAL 9005 (black) (only for PA...-1 / PA...-2a / PA...-2b / PA...-2c / PA...-10) Mounting frame (-E1) - Galvanised sheet steel (only for PA...-1 / PA...-2a / PA...-2b / PA...-2c). Insulation - inside (-Ii), thermal insulation at the inside of the plenum box - outside (-Ia), thermal insulation at the outside of the plenum box Frame (-RP, for PA-R only) - Extruded aluminium profile, natural colour anodised (E6/ EV1) - with 2-mm compensator made of extruded aluminium profile, natural colour anodised (E6/EV1) - with hit-and-miss damper (-SS), made of electrolytically galvanised sheet steel. Fastening Screw mounting (-SM) - PA...-1 / PA...-2a / PA...-2b / PA...-2c - Band design - Screws must be provided on-site Concealed mounting (-VM, standard) - PA...-1 / PA...-2a / PA...-2b / PA...-2c (-VM12, standard) - PA...-1 / PA...-2a / PA...-2b / PA...-2c (-VM11 + E1 at an extra charge) - PA...-3 / PA...-5 / PA...-6 / PA Band design - PA-R - PA-10 (-VM10) Profiled blade design and spacing PAZ (standard) PAS PAG PA-R Mounting type Standard: non-walk-on non-ball-impact-resistant ball-impact-resistant (only with SM) x 13 mm 8 mm When ordering, the X dimension must be specified! Droplet-forming blade adjustable (for PA...-2a / PA...-2c / PA...-5 / PA...-6) 01/14-4
5 Models and dimensions for wall and ceiling mounting and installation in ventilation ducts Dimensions PA...-1-VM All models consist of basic type PA...-1 PA...-2a PA...-2b Available sizes L L1 L2 L PA...-2c Frame profile PA...-1 / PA...-2a / PA...-2b / PA...-2c H H1 H2 H3 H4 PLA 8 mm 13 mm All combined lengths and heights available. Other sizes available on request. PLA = number of profiled blades 01/14-5
6 Ventilation grille PA...-1 / PA...-2a / PA...-2b / PA...-2c, as band 2-part if length of band BL 2025 mm multi-part for a length of band BL > 2025 mm Ventilation grille bands can be supplied only with screw mounting (SM). Fishplate (VL) Standard for band design ES = End piece DIF = Difference TS = Section(s) BL = Length of band BL1 = Total length 01/14-6
7 Dimensions PA VM M4x80 for model with counter pole brace M4x20 for model with plenum box Counter pole brace on-site Frame profile PA Available sizes L L1 L H H1 H2 PLA 8 mm 13 mm All combined lengths and heights available. Other sizes available on request. Hit-and-miss damper not possible. PLA = number of profiled blades 01/14-7
8 Ventilation grille types PA...-10, as band 2-part if length of band BL 2025 mm multi-part for a length of band BL > 2025 mm Ventilation grille bands can be supplied only with concealed mounting (-VM10). Connecting piece (VS) Standard for band design As-delivered condition Note: The connection spigot is folded down manually on-site. ES = End piece DIF = Difference TS = Section(s) BL = Length of band BL1 = Total length 01/14-8
9 for floor mounting Dimension PA...-3-VM All models consist of basic type PA...-3 PA...-5 PA...-6 Available sizes L L1 L2 L PA...-7 H H1 H2 H3 H4 PLA 8 mm 13 mm All combined lengths and heights available. Other sizes available on request. PLA = number of profiled blades Frame profile PA...-3 / PA...-5 / PA...-6 / PA...-7 Grille insert fastening (standard model) 01/14-9
10 Ventilation grille PA...-3 / PA...-5 / PA...-6 / PA...-7, as band 2-part if length of band BL 2025 mm multi-part for a length of band BL > 2025 mm Ventilation grille bands can be supplied only with concealed mounting (-VM). Fishplate (VL) Standard for band design Note: For walk-on floor-mounted grilles in band design, which are used in wet areas (e.g. swimming pools, barefoot areas), SCHA- KO recommends the roll-down grille PA-R. ES = End piece DIF = Difference TS = Section(s) BL = Length of band 01/14-10
11 PA-R (Roll-down grille) Available sizes H H Roll-down grille length: max. 10m In order to reach the full load-carrying capacity, an on-site centre support for the roll-down grille must take place for H=325. To facilitate on-site mounting, the roll-down grille insert can be divided into individual lengths. Technical handling, chemical and mechanical resistance see Page 13. Note: This grille version is perfect for wet areas (e.g. swimming pool, barefoot areas). Accessories: PA-R-RP, with frame as band 2-part if length of band BL 2025 mm ES = End piece DIF = Difference TS = Section(s) BL = Length of band multi-part for a length of band BL > 2025 mm Available sizes PA-R-RP H H1 H End pieces 325 not available for H = 325. Frame profile PA-R-RP / PA-R-RP-SS Compensator 2 mm Note: The roll-down grille is placed loosely in the frame. Ventilation grille bands can be supplied only with concealed mounting (-VM). Fishplate (VL) for band design, see page 8. 01/14-11
12 PA-R-RP-SS, with frame and hit-and-miss damper as band 2-part if length of band BL 2025 mm multi-part for a length of band BL > 2025 mm Available sizes PA-R-RP-SS H H1 H End pieces 325 not available for H = 325. Attention! The hit-and-miss damper (-SS) is not suitable for wet areas (e.g. swimming pool, barefoot areas)! ES = End piece DIF = Difference TS = Section(s) SS = Hit-and-miss damper BL = Length of band 01/14-12
13 PA-R (Roll-down grille) Technical handling Use: Resistance: Safety: The roll-down grille is suitable for transit areas of residential and office buildings. Its resistance and load bearing capacity are such that they fulfil the requirements of permanent and daily use. The chemical, thermal and mechanical resistances of the roll-down grille were tested and showed that it is also UV-resistant. This grille is perfect for wet areas (e.g. swimming pool, barefoot areas) and can be cleaned in dishwashers (up to 60 C). The integrated cutting edge cover reduces the risk of injuries and prevents rattling in case of lateral play. Due to its anti-slip design, it is safe to walk on. Chemical and mechanical resistance The quality requirements for daily use were proven for all surface types in several test series (based on requirements of standards and regulations); they have been verified for the following chemical and mechanical resistances: - Coating thickness to ISO 2360 (DIN 50984) - Cross-cut test to ISO 2409 (DIN 53151): GT0 - Buchholz indentation test to ISO 2815 (DIN 53153) - Ball impact test according to ASTM D Boiling test according to GSB procedure (organization for quality surface coating) - Resistance to chlorine and salt compounds, e.g. in swimming pools - Cleaning with standard cleaning agents - Dishwasher-proof (up to 60 C) - UV-resistant 01/14-13
14 Dimensions of accessories for wall and ceiling mounting and installation in ventilation ducts Plenum box (-ASK) with lateral connection spigot (-AS1) for PA...-1 / PA...-2a only outside With fixing lugs Grilles cannot be fitted with a hit-and-miss damper if a plenum box is attached, i.e., it can either be fitted with a hit-and-miss damper or a plenum box. Available sizes ASK -AS1 L H KL H1 KH Ød L H KL H1 KH Ød L H KL H1 KH Ød L H KL H1 KH Ød /14-14
15 Spigot arrangement Insulation for plenum box internal (-Ii) - Lateral connecting piece (-AS1, standard) - Connecting piece from above (-AS2) - Connecting piece front side (-AS3) Dimensions and prices for connecting piece from above (-AS2) and connecting piece front side (-AS3) upon request. Detail X external (-Ia) Concealed plates can be bent outwards, if necessary. Throttle damper (-DK) Rubber lip seal (-GD) Detail Y Plenum box (-ASK) with lateral connection spigot (-AS1) as band 01/14-15
16 for PA...-1 / PA...-2a only 2-part if length of band BL < 2025 mm -17 multi-part for a length of band BL > 2025 mm -17 ES = End piece DIF = Difference TS = Section(s) BL = Length of band BL1 = Total length of grille (BL1 = BL + 23) KL = Length of box KL1 = Length of box end piece (KL1 = ES - 17) n = Number of 01/14-16
17 Plenum box (-ASK) with lateral connection spigot (-AS1) only for PA Spigot arrangement - Lateral connecting piece (-AS1, standard) - Connecting piece from above (-AS2) - Connecting piece front side (-AS3) Dimensions and prices for connecting piece from above (-AS2) and connecting piece front side (-AS3) upon request. Throttle damper (-DK) Rubber lip seal (-GD) Detail Y outside Available sizes ASK -AS1 only for PA-10 L H KL H1 KH ød a L H KL H1 KH ød a L H KL H1 KH ød a Insulation for plenum box internal (-Ii) outside(-ia) L H KL H1 KH ød a /14-17
18 Plenum box (-ASK) with lateral connection spigot (-AS1) as band only for PA part if length of band BL < 2025 mm multi-part for a length of band BL > 2025 mm ES = End piece DIF = Difference TS = Section(s) BL = Length of band BL1 = Total length of grille (BL1 = BL + 10) KL = Length of box KL1 = Length of box end piece (KL1 = ES - 9) n = Number of 01/14-18
19 for wall and ceiling mounting and installation in ventilation ducts Corner angle (-ES-1) for ventilation grille band PA...-1 / PA...-2a / PA...-2b / PA...-2c for floor mounting Corner angle (-ES-3) for ventilation grille band PA...-3 / PA...-5 / PA...-6 / PA...-7 Dummy plate Dummy plate Corner angles can only be manufactured as dummy plates, i.e., without a plenum box. The corner angle is angled by 90 and has a flange length of 450 mm. The dummy piece used is made of Zincor and painted to RAL 9005 (black). Corner angle (-ES-10) for ventilation grille band PA Corner angles can only be manufactured as dummy plates, i.e., without a plenum box. The corner angle is angled by 90 and has a flange length of 450 mm. The dummy plate used is made of galvanised sheet steel and painted to RAL 9005 (black). Corner angle (-ES-R) for ventilation grille band PA-R-RP / PA-R-RP-SS Dummy plate Dummy plate Corner angles can only be manufactured as dummy plates, i.e., without a plenum box. The corner angle is angled by 90 and has a flange length of 436 mm. The dummy piece used is made of Zincor and painted to RAL 9005 (black). Corner angles can only be manufactured as dummy plates, i.e., without a plenum box. The corner angle is angled by 90 and has a flange length of 450 mm. The dummy plate used is made of galvanised sheet steel and painted to RAL 9005 (black). 01/14-19
20 Mounting frame (-E1) for wall and ceiling mounting and installation in ventilation ducts PA...-1 / PA...-2a / PA...-2b / PA...-2c Length L 825 mm = 4 wall anchors Length L > 825 mm = 6 wall anchors Mounting frame for ventilation grille band PA...-1 / PA...-2a / PA...-2b / PA...-2c 2-part, BL 2025 mm - 6 wall anchors several sections, BL > 2025 mm - 8 wall anchors BL = Length of band MF = Wall anchor SV = Plug-in connection MS = Assembly rail ES = End piece DIF = Difference TS = Section(s) Mounting frames for grille bands are supplied with plug-in connections. Assembly rails are additionally attached, they can be easily removed by turning, once the grille has been mounted in the wall. All frames are supplied without wall anchors. Wall anchors available at an extra charge only. 01/14-20
21 Fastening methods for wall and ceiling mounting and installation in ventilation ducts PA...-1 / PA...-2a / PA...-2b / PA...-2c Screw mounting (-SM) (drawn without grille insert) The ventilation grilles types PA...-1 / PA...-2a / PA...-2b / PA...- 2c are only supplied with screw mounting (SM) on special request. Only this model is ball-impact-resistant (to DIN 18032, Part 3). L<625 Indentation for slotted shallow-raised countersunk-head DIN ISO 7051 pitch 3.9 (on-site) PA...-1 / PA...-2a / PA...-2b / PA...-2c / PA Concealed mounting (-VM) Unless stated otherwise, the ventilation grilles types PA...-1 / PA...-2a / PA...-2b / PA...-2c are delivered with concealed mounting (-VM12). The ventilation grille of type PA can only be delivered with concealed mounting (-VM10). Starting from height 225/210 2 attachments per side. VM 11 VM 12 L 625 Band design End piece Indentation for slotted shallow-raised countersunk-head tapping screw DIN ISO 7051 pitch 3.9 (on-site) The concealed mounting VM 11 is only available with a mounting frame or plenum box. The mounting frame must be ordered separately. VM 10 1.) Section 2.) End piece < 625 mm End piece 625 mm Section = 4 raised countersunk head tapping screws = 6 raised countersunk head tapping screws = 6 raised countersunk head tapping screws Concealed mounting VM 10 is possible only for the ventilation grille of type PA with a plenum box or counter pole brace (on site). 1.) Riveting nut M4 2.) M4x20 for plenum box M4x80 with counter pole brace 01/14-21
22 for floor mounting PA...-3 / PA...-5 / PA...-6 / PA...-7 / PA-R-RP / PA-R-RP-SS Frame fixed by concealed mounting (-VM) (drawn without grille insert) PA...-3 / PA...-5 / PA...-6 / PA...-7 L = Indentation for slotted shallow-raised countersunk-head tapping screw DIN ISO 7051 pitch 3.9 (on-site) Section A-A (drawn rotated by 90 ) Fixed without wall anchors L = Fixed with wall anchors (Wall anchors at an extra charge) PA...-3 / PA...-5 / PA...-6 / PA...-7 / PA-R-RP / PA-R-RP-SS Band design End piece Indentation for slotted shallow-raised countersunk-head tapping screw DIN ISO 7051 pitch 3.9 (on site) Length L 825 mm = 4 wall anchors Length L > 825 mm = 6 wall anchors Section End piece 425 mm End piece > 425 mm Section 4 raised countersunk head tapping = screws 6 raised countersunk head tapping = screws = 6 raised countersunk head tapping screws 01/14-22
23 Technical data The technical data apply to all models. Pressure loss and noise level Supply air without hit-and-miss damper Return air without hit-and-miss damper Supply air with hit-and-miss damper Return air with hit-and-miss damper v K (m/s) Hit-and-miss damper position OPEN in % Hit-and-miss damper position OPEN in % Correction factor Supply and return air A stirn (m²) 0,01 0,02 0,04 0,08 0,16 0,32 KF (-) L WA = L WA1 + KF Face area Supply and return air H L ,016 0,021 0,026 0,031 0,042 0,052 0, ,031 0,041 0,051 0,061 0,082 0,102 0, ,061 0,081 0,101 0,122 0,162 0,202 0, ,091 0,121 0,151 0,182 0,242 0,303 0,363 A stirn (m²) 01/14-23
24 Front side velocity 01/14-24
25 Maximum end velocity of jet Supply air without coanda effect Supply air with coanda effect 01/14-25
26 Jet path Supply air without coanda effect Heating Cooling 01/14-26
27 Critical throw Supply air with coanda effect 01/14-27
28 Maximum penetration In heating mode Supply air without coanda effect 01/14-28
29 Induction ratios and temperature ratios Supply air without coanda effect Supply air with coanda effect 01/14-29
30 Minimum distances Supply air without coanda effect Supply air with coanda effect For the diagrams to be correct, the distance z between two grilles must be x (m) x 0.2 Legend V ZU (m³/h) [l/s] = Supply air volume V AB (m³/h) [l/s] = Return air volume V X (m³/h) [l/s] = total air jet volume at point x v max (m/s) = Maximum end velocity of jet v K (m/s) = Duct velocity v stirn (m/s) = Intake velocity, blower stream velocity, outflow velocity, relative to A stirn A stirn (m²) = Face area x (m) = horizontal throw y (m) = vertical throw x kr (m) = Critical throw ρ (kg/m³) = Density Δp t (Pa) = Pressure loss L WA [db(a)] = A-weighted sound power level [L WA = L WA1 + KF] L WA1 [db(a)] = A-weighted sound power level, relative to A stirn, = 0.08 m² KF (-) = Correction factor ΔT O (K) = Temperature difference between supply air temperature and room temperature (ΔT O = t ZU - t R ) ΔT OH (K) = Temperature difference between air supply and room temperature in heating mode (ΔT OH = t ZUH - t RH ) ΔT X (K) = Temperature ratio at position x t ZUH ( C) = Supply air temperature t RH ( C) = Room temperature t zu ( C) = Supply air temperature t R ( C) = Room temperature i (-) = Induction ratio (i = V X / V ZU ) TV (-) = Temperature ratio (TV = ΔT X / ΔT O ) z (m) = Minimum clearance between two grilles x (m) x 0.2 RH (mm) = Room height RB (mm) = Room width H (mm) = Height L (mm) = Length 01/14-30
31 Order details of PA-1 / PA-2a / PA-2b / PA-2c / PA-10 Ventilation grille type PA for wall mounting, ceiling mounting and installation in ventilation ducts Z blade profiles horizontal / fixed G S 13 mm non-ball-impact-resistant Louvre spacing 8 mm non-ball-impact-resistant with concealed mounting (-VM, standard). ball-impact-resistant according to DIN 18032, Part 3 only in connection with screw mounting (-SM). with horizontal fixed blade profiles -1 with horizontal fixed blade profiles additionally with vertical, individually adjustable droplet-forming blades -2a with horizontal fixed blade profiles with Hit-and-miss damper -2b with horizontal fixed blade profiles additionally with vertical, individually adjustable dropletforming blades and Hit-and-miss damper -2c with horizontal fixed blade profiles with narrow frame profile -10 with screw mounting -SM (band design with screw mounting only) with concealed mounting -VM11 (only possible in conjunction mounting frame E1 or plenum box) -VM12 with concealed mounting -VM10 (available only in connection with plenum box or counter pole brace on-site) 325 Length as band Length as band 2-part (BL < 2025 mm) multi-part (BL > 2025 mm) 2-part (BL < 2025 mm) multi-part (BL > 2025 mm) Height Height Order example: PAZ-13-1-VM Unless stated otherwise, the thick-frame model will be delivered! 01/14-31
32 Order details of PA-3 / PA-5 / PA-6 / PA-7 Ventilation grille type PA for floor mounting Z blade profiles horizontal / fixed G S 13 mm non-walk-on non-ball-impact-resistant Louvre spacing 8 mm walk-on, ball-impact-resistant (acc. to DIN 18032, Part 3) with horizontal fixed blade profiles -3 with horizontal fixed blade profiles additionally with vertical, individually adjustable droplet-forming blades -5 with horizontal fixed blade profiles additionally with vertical, individually adjustable droplet-forming blades and hitand-miss damper -6 with horizontal fixed blade profiles with hit-and-miss damper -7 with concealed mounting -VM 325 Length as band 2-part (BL < 2025 mm) multi-part (BL > 2025 mm) Height Order example: PAZ-13-1-VM Unless stated otherwise, the thick-frame model will be delivered! 01/14-32
33 Order details of PA-R / accessories of PA Roll-down grille with vertical fixed profiled blades for floor installation, walk-on Louvre spacing 10 mm PA-R Accessories: Mounting frame -E1 (only available for PA...-1 / PA...-2a / PA...-2b / PA...-2c) without frame - with frame -RP 1 piece 2-part multi-part (BL 2025 mm) (BL > 2025 mm) without Hit-and-miss damper - with Hit-and-miss damper -SS plenum box -ASK (only for PA...-1 / PA...-2a / PA ) (only possible without hit-and-miss damper) 2-part (BL 2025 mm) As band multi-part (BL > 2025 mm) lateral -AS1 connection spigot from above -AS2 front side -AS3 Height Band L = (PA...-1 / PA...-2) L = (PA...-10) Order example: PA-R-RP-SS x 125 Unless stated otherwise, the thick-frame model will be delivered! without throttle damper - without Rubber lip seal - with throttle damper -DK with Rubber lip seal -GD without insulation - with insulation inside -Ii with insulation external -Ia Corner angle 90 -ES (with dummy plate) for PA...-1 / PA...-2a / PA...-2b / PA...-2c -1 for PA for PA...-3 / PA...-5 / PA...-6 / PA for PA-R-RP -R 01/14-33
34 Specification texts Supply air and return air grilles for wall, ceiling and ventilation duct installation, consisting of front frame and blades made of extruded aluminium profiles natural colour anodised (E6/EV1) or specially anodised or painted at an extra charge. with front side horizontal fixed blade profiles, PAZ, lightweight model, diagonal throw. with blade spacing 13 mm (non-ball-impact-resistant) Fastening with concealed mounting (-VM12). Product: SCHAKO type PAZ-1 Dimensions:: Length Height Blade profile: Louvre spacing: mm mm - PAG, compact model, straight throw. - PAS, compact model, diagonal throw. - 8mm: - non-ball-impact-resistant (standard) with concealed mounting (-VM) - ball-impact-resistant according to DIN Part 3 only with screw mounting (-SM) Accessories: - with plenum box (-ASK) made of galvanised sheet steel (only possible without hit-and-miss damper) (for PA...-1 / PA...-2a only) - with connection spigot: - sideways (-AS1, standard) - from above (AS2) - front side (-AS3) - with damper (-DK, for ASK-AS1) in plenum box, adjustable, for simple air volume regulation. - with rubber lip seal (-GD), made of special rubber, at the connection spigot. - with thermal insulation - inside - external - with mounting frame (-E1) - 1 piece - 2-part (BL 2025mm) - multi-part (BL > 2025mm) - Corner angle 90 (-ES-1) - additionally with individually adjustable vertical droplet-forming blades Product: SCHAKO type PA -2a - with hit-and-miss damper for air volume regulation, made of electrolytically galvanised sheet steel, Product: SCHAKO type PA -2b - additionally with individually adjustable vertical droplet-forming blades and hit-and-miss damper, for air volume regulation, made of electrolytically galvanised sheet steel. Product: SCHAKO type PA...-2c - as band: - 2-part (BL 2025mm) - multi-part (BL > 2025mm) - with concealed mounting VM11 (only available in connection with mounting frame E1 or plenum box) - with screw mounting (-SM) 01/14-34
35 Supply air and return air grilles for wall, ceiling and ventilation duct installation, consisting of a narrow front frame and blades made of extruded aluminium profiles natural colour anodised (E6/EV1) or specially anodised or painted at an extra charge. With front-side horizontal fixed blade profiles, PAZ, diagonal throw. with louvre spacing 13 mm (non-ball-impact-resistant, non-walkon) Fastening with concealed mounting (-VM10). Product: SCHAKO type PAZ-10 Dimensions:: Length mm Height mm Blade profile: - PAG, compact model, straight throw. - PAS, compact model, diagonal throw. Louvre spacing: - 8 mm (non-ball-impact-resistant according to DIN Part 3) Accessories: - with plenum box (-ASK), made of galvanised sheet steel (only for PA...-10) - with connection spigot: - sideways (-AS1, standard) - from above (AS2) - front side (-AS3) - with damper (-DK, for ASK-AS1) in plenum box, adjustable, for simple air volume regulation. - with rubber lip seal (-GD), made of special rubber, at the connection spigot. - with thermal insulation - inside - external - Corner angle 90 (-ES-10) Supply and return air grilles, especially for floor installation, consisting of front frame and blades made of extruded aluminium profiles natural colour anodised (E6/EV1) or specially anodised or painted at an extra charge, with removable blade insert made of horizontal fixed blade profiles PAZ, lightweight model, diagonal throw. with louvre spacing 13 mm (non-ball-impactresistant, non-walk-on) Fastened with concealed mounting (- VM). Product: SCHAKO type PAZ-3 Dimensions:: Length mm Height mm Blade profile: - PAG, compact model, straight throw. - PAS, compact model, diagonal throw. Louvre spacing: - 8 mm (walk-on, ball-impact-resistant to DIN Part 3), with concealed mounting (-VM) only - additionally with individually adjustable vertical droplet-forming blades Product: SCHAKO type PA additionally with individually adjustable vertical droplet-forming blades and hit-and-miss damper, for air volume regulation, made of electrolytically galvanised sheet steel. Product: SCHAKO type PA with hit-and-miss damper for air volume regulation, made of electrolytically galvanised sheet steel, Product: SCHAKO type PA as band: - 2-part (BL 2025mm) - multi-part (BL > 2025mm) Accessories: - Corner angle 90 (-ES-3) 01/14-35
36 Roll-down grille in band design in particular for floor installation, consisting of vertical fixed profiled blades made of extruded aluminium profile natural colour anodised (E6/EV1), louvre spacing 10mm, walk-on. This grille is perfect for wet areas (e.g. swimming pool, barefoot areas). Blade connector made of plastic. Fastened with concealed mounting (-VM). Product: SCHAKO type PA-R Dimensions: Length mm Height mm Accessories: - with frame (-RP) and 2-mm compensator made of extruded aluminium profile, natural colour anodised (E6/EV1) - with hit-and-miss damper (-SS), made of electrolytically galvanised sheet steel. - as band: - 2-part (BL 2025mm) - multi-part (BL > 2025mm) - Corner angle 90 (-ES-R) 01/14-36
Ventilation grille Model AL
Ventilation grille AL Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationCeiling Slot Diffuser DSC
Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationVentilation grille Model IB-R
Ventilation grille Model IB-R Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationCeiling Slot Diffuser DSC
Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationCeiling Slot Diffuser DSC
Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationCompact Grille Model KG
Compact grille KG Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...3
More informationNozzle Jet Diffuser Model DSA
Nozzle Jet Diffuser Model DSA Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Application...
More informationWGA Long throw nozzle grille
Technical documentation WGA Long throw nozzle grille Contents Function and use... 2 Models... 2 Processing... 3 Accessories... 3 Models and dimensions... 4 Quick selection... 12 Installation situation...
More informationCeiling diffuser 4DE
Ceiling diffuser 4DE Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Fax 0 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction... 3 Model...
More informationCeiling Slot Diffuser Model DSX
Ceiling Slot Diffuser Model DSX Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationSwirl Diffuser Model DQF
Swirl Diffuser Model DQF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationCeiling diffuser 4DF
Ceiling diffuser 4DF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contens Description...3 Construction...
More informationDSC-PLASTER Slot diffuser for plasterboard ceilings
Technical documentation DSC-PLASTER Slot diffuser for plasterboard ceilings Contents Function and use... 2 Models... 2 Processing... 2 Dimensions... 3 Band design... 4 Accessories with dimensions... 4
More informationRound duct grille Model KG-RR
Round duct grille Model KG-RR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationSwirl Diffuser DHV Contents Description...3 Models and dimensions...4 Technical data...8
Swirl diffuser DHV Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationceiling swirl diffuser DQJ
ceiling swirl diffuser DQJ Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Advantages...
More informationCeiling impulse diffuser Model PIL
Ceiling impulse diffuser Model PIL Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationLint separator FLARE
Lint separator FLARE Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Telefax 0 74 63-980 - 200 info@schako.de www.schako.de Contens Description...3 Construction... 3 Model...
More informationCeiling Swirl Diffuser DQJ
Ceiling Swirl Diffuser DQJ Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de contents Description...3 Advantages...
More informationceiling swirl diffuser Model DQJA / DQJR
ceiling swirl diffuser Model DQJA / DQJR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationRound duct diffuser DBB-RR
Round duct diffuser DBB-RR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationAir diffuser system Model AUDIX -AW
Air diffuser system Model AUDIX -AW Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationLAQ Return air diffuser
LAQ Return air diffuser PERFORMANCE DATA NW 310 / 400 / 500 / 600 / 625 Air volumes at 35 db(a) from 350 m³/h to 1090 m³/h Air volumes at 35 db(a) from 97 l/s to 303 l/s SPECIAL FEATURES suitable for return
More informationCeiling induction diffuser DISA-300
Ceiling induction diffuser DISA-300 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationCeiling induction diffuser DISA-601
Ceiling induction diffuser DISA-601 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Phone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationLong Throw Nozzle WDA
Long Throw Nozzle WDA Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationParticle Filter Box Model FKF
Particle Filter Box Model FKF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationParticle Filter Box FKU
Particle Filter Box FKU Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationTechnical documentation
VM-PRO Mechanical volumetric flow control- Table of Contents Areas of application... 2 Useable volumetric flow ranges... 2 Function... 3 Processing... 3 Available sizes / -dimensions... 4 Accessories list
More informationWeather protection grille ALAS
Weather protection grille ALAS Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationDRUM SLOT DIFFUSER TYPE: RT350
TYPE: RT3 RT1 + RP301 98 RT2 + RP302 37 123 13.5 75.5 214 Application The RT3 drum slot diffuser is suitable for the supply and exhaust of cooled and warmed air in offices, shops, meeting rooms, etc. The
More informationVolumetric Flow Limiter VOLKOM
Volumetric Flow Limiter Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Field of
More informationSlot diffusers, Round duct diffusers. IMP Klima
, Round duct diffusers 04 Round duct diffusers 176 , Round duct diffusers SLOT DIFFUSERS, ROUND DUCT DIFFUSERS SWIRL DIFFUSERS, VARIABLE SWIRL DIFFUSERS CIRCULAR DIFFUSERS, SQUARE DIFFUSERS VENTILATING
More informationVentilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles, made of aluminium, with fixed horizontal blades also for horizontal runs Single
More informationWALL VENTILATION GRILLES CBP
WALL VENTILATION GRILLES CBP 01.10-01 CBP WALL VENTILATION GRILLES Description Designed for ventilation and air-conditioning installations, where control of air flow and direction of the air is required.
More informationSLOT DIFFUSERS, ROUND DUCT DIFFUSERS
SLOT DIFFUSERS, ROUND DUCT DIFFUSERS Slot diffusers LD-3, LD-4, LD-5 LD-3 LD-4 LD-5 SLOT DIFFUSERS Application: Slot diffusers are designed for air supply in rooms with floor to ceiling heights of 2.5
More informationMechanical mixing box MBM
Mechanical mixing box MBM Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Fax 0 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction... 3 Model...
More informationVentilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades Ventilation
More informationAdditional operating instructions according to ATEX 94/9/EC Volumetric flow controller VM-PRO-Ex
Additional operating instructions according to ATEX 94/9/EC Volumetric flow controller VM-PRO-Ex Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Telefax 0 74 63-980 - 200
More informationVentilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Grille cores made of aluminium, with fixed horizontal blades Grille cores with special profiled blades
More informationVentilation grilles for installation into walls, sills or rectangular
X X testregistrierung Ventilation grilles for installation into walls, sills or rectangular ducts Type Ventilation grilles with flat border construction also for continuous horizontal runs The new ventilation
More informationFan coil unit NBS 100/150
Fan coil unit /150 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Advantages...3
More informationCeiling swirl diffusers
X X testregistrierung Ceiling swirl diffusers Type Horizontal swirling air discharge Vertical air discharge Protective cage For high rooms, with adjustable air control blades Square ceiling swirl diffusers,
More informationCeiling diffusers. Type VDR. For large temperature differences in heating mode, high penetration of air, with adjustable air control blades
X X testregistrierung Type Vertical air discharge Horizontal air discharge For large temperature differences in heating mode, high penetration of air, with adjustable air control blades Circular ceiling
More informationCeiling swirl diffusers
X X testregistrierung Ceiling swirl diffusers Type Horizontal swirling air discharge Adjustable blades Protective cage For high rooms, with adjustable air control blades Circular ceiling swirl diffusers,
More informationC O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CE SERIES CE SERIES LINEAR SLOT DIFFUSERS CE SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman
More informationSlot diffusers for ceiling installation
X X testregistrierung Slot diffusers for ceiling installation Type lenum box with damper blade (optional) Alternating horizontal air discharge Concealed screw fixing With wide diffuser face for larger
More informationRound Duct System Model RR-Complete
Round Duct System Model RR-Complete Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...4
More informationADJUSTABLE SLOT DIFFUSER TYPE: SE800
TYPE: SE800 Installation dimensions Construction with hanger brackets Construction without hanger brackets D C Application 7 E A 0 7 E A 0 The slot diffuser, type SE800 is used for the supply of cooled
More informationRound Duct System Accessories RR - accessories
Round Duct System Accessories RR - accessories Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telefon 0 74 63-980 - 0 Telefax 0 74 63-980 - 200 info@schako.de www.schako.de Round Duct System Accessories
More informationCeiling swirl diffusers with perforated face plate
X X testregistrierung Ceiling swirl diffusers with perforated face plate Type Horizontal swirling air discharge Diffuser face plate with perforated circular face style and exposed discharge nozzle Diffuser
More informationRound Duct System Model RR-Complete
Round Duct System Model RR-Complete Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...4
More informationIncorporating V2.0. Product spec >>> > Series DJ - Drum jet diffusers
Incorporating V2.0 Product spec >>> > Series DJ - Drum jet diffusers Diffusers Drum jets (Premium) Recommended for: Wall, ceiling & duct Supply Overview Exceptional throw Throw completely adjustable Drum
More informationGrilles Linear Grilles
T 1.1/1/EN/2 Grilles Linear Grilles for Walls, Floors, Doors, Rectangular and Circular Ducts TROX GmbH Telephone +9/28 /2 02-0 Telefax +9/28 /202-2 Heinrich-Trox-Platz e-mail trox@trox.de D-0 Neukirchen-Vluyn
More informationSUPPLY AND RETURN AIR GRILLES TYPE: AS/GS120 AS/GS130
SUPPLY AND RETURN AIR GRILLES TYPE: AS/GS120 AS/GS130 Installation dimensions AS/GS120 AS/GS130 Application The grille type AS / GS is used for the supply and exhaust of cooled or heated air in facilities
More informationType DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION LEVELS, WITH FIXED AIR CONTROL BLADES
Homepage > Products > Grilles and Diffusers > Ceiling diffusers > Ceiling swirl diffusers with perforated face plate > Type DCS Type DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION
More informationC O L M A N. Air Distribution LINEAR BAR GRILLES T SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES T SERIES C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR BAR GRILLES T SERIES
More informationCNVA TECHNICAL DOCUMENTATION. Active floor convector. Contents
CNVA Active floor convector Contents General description... 2 Advantages/Customer benefits... 2 Operation... 2 Description of the equipment... 3 Construction and Dimensions... 4 Accessories... 7 Connections...
More informationC O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CD SERIES CD SERIES LINEAR SLOT DIFFUSERS QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman Moducel
More informationCeiling swirl diffusers with perforated face plate
X X testregistrierung Ceiling swirl diffusers with perforated face plate Type Horizontal swirling air discharge For horizontal swirling supply air discharge creating high induction levels, with fixed air
More informationPURELINE18 PARTICULARLY SLIM DIFFUSER FACE, AVAILABLE IN NUMEROUS VARIANTS FOR MANY DIFFERENT INSTALLATION SITUATIONS
Homepage > Producten > Luchtroosters > Lijnroosters > Pureline18 PURELINE18 PARTICULARLY SLIM DIFFUSER FACE, AVAILABLE IN NUMEROUS VARIANTS FOR MANY DIFFERENT INSTALLATION SITUATIONS Slot diffusers with
More informationINDEX. Chapter3. air master. Linear Bar Grilles
Chapter3 INDEX A Linear bar grilles: 1. Supply linear bar grille...: ASLG...3.1 2. Supply linear bar register...: ASLR...3.2 3. Return linear bar grille...: ARLG...3.3 4. Return linear bar register...:
More informationGrilles & Diffusers. Series NV Non-vision grilles. Incorporating. Sight blocking design ensures privacy is maintained
Grilles & Diffusers Incorporating Series NV Sight blocking design ensures privacy is maintained Perfect for areas like changing rooms Four models available including units to suit door mounting and dark
More informationCeiling swirl diffusers
X X testregistrierung Ceiling swirl diffusers Type RFD-Sirius, cross bar Horizontal swirling air discharge Circular diffuser face, integral measuring tubes is an air terminal device combined with a VAV
More informationLINEAR BAR GRILLES. GRILLES-Linear Bar
LINEAR BAR GRILLES A range of linear bar grilles with horizontal blades at either 0, 15, 0 or 45 deflection and fixed or removable cores. Usually used in sidewall applications, but they are also designed
More informationBSK-EN Fire damper INSTALLATION, MOUNTING AND OPERATING INSTRUCTIONS
INSTALLATION, MOUNTING AND OPERATING BSK-EN Fire damper Contents Description... 2 Models and dimensions... 3 Mounting information... 5 Installation information... 6 Technical data... 7 Accessories... 9
More informationIncorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles
Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional
More informationType VSD35. Nominal length up to 1500 mm: one spigot
Type VSD35 Nominal length up to 1500 mm: one spigot NUMEROUS VARIANTS FOR MANY DIFFERENT INSTALLATION SITUATIONS Slot diffusers with 35 mm diffuser face (nominal width) and adjustable air control elements
More informationHIGH CAPACITY LINEAR SLOT DUFFUSERS
HIGH CAPACITY LINEAR SLOT DUFFUSERS CB SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871
More informationLINEAR SLOT DIFFUSERS
OVERVIEW CHARACTERISTICS APPLICATIONS OVERVIEW : The series linear diffusers allow to manage high air flows with minimum pressure losses and generated noise power. They allow to fully make use of the induction
More informationProduct Nomenclature G-X-AB-Z 0 = Zero Degree, 1 = 15 Degree, 2 = 15 Degree (2-way)
Fixed Bar Grills - Series G Description Caryaire Fixed Bar Grills are ideal for Supply as well as Return air, in both Cooling as well as Heating. It can be used in high side wall or ceiling applications.
More informationACTIVENT System. Specifications. Product code example ACTA
Activent is a ventilation system for supplying and distributing air. The system has been proven to function effectively in both small and large areas and is used in all types of premises ranging from offices
More informationEX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.
25 YEARS OF EX C E L L E N C E ISO 9001 CERTIFIED COMPANY 3.0 INDEX ISO 9001 CERTIFIED COMPANY SECTION TOPIC PAGE 3.1 Double deflection linear bar grille ASLG 3 3.2 Double deflection linear bar register
More informationType VDL FOR HIGH ROOMS, WITH ADJUSTABLE AIR CONTROL BLADES. Homepage > Products > Air Diffusers > Swirl diffusers > Type VDL
Homepage > Products > Air Diffusers > Swirl diffusers > Type VDL Type VDL FOR HIGH ROOMS, WITH ADJUSTABLE AIR CONTROL BLADES Circular ceiling swirl diffusers, with manual or motorised adjustment of the
More informationKrantz. Floor displacement outlet Q-B-DN 200. Air distribution systems
Krantz Floor displacement outlet Q-B-DN 0 Air distribution systems DS 62 E 05. Construction design Preliminary remarks Floor displacement outlets are usually used where wall or plinth displacement outlets
More information1/3/EN/4. Ventilation Grilles Types TRS-K TRS-R TRSE-R
1/3/EN/4 Ventilation Grilles Types TRS-K TRS-R TRSE-R Contents Description Description 2 Constructions Dimensions TRS-K 3 Constructions Dimensions TRS-R 4 Constructions Dimensions TRSE-R 5 Installation
More informationAccessories. Balancing plenum PRI For balancing & equalising the airflow and attenuating the duct noise
Halton AWE/AWU Universal Grille Horizontal air supply, suitable also for exhaust Fixed front vanes, stable throw pattern with vertical 15 deflection: AWE, no deflection: AWU Adjustable rear vanes for horizontal
More informationC O L M A N. Air Distribution SWIRL DIFFUSERS DWT SERIES DWT SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S SWIRL DIFFUSERS DWT SERIES DWT SERIES DISTRIBUTION PATTERNS & FIXING OPTIONS Application The DWT Series of swirl diffusers have been
More informationLINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise
LINEAR BAR GRILLES T SERIES Quality and e!ciency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871 527 - email sales@jprservices.co.uk
More informationTHB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser
Halton THB Perforated Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation either directly to ductwork or balancing plenum Detachable front panel enables the cleaning of the diffuser
More informationWDD/WSD - Grille. Halton WDD/WSD. Universal Grille
Halton WDD/WSD Universal Grille Horizontal air supply, suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes: WDD, adjustable horizontal vanes: WSD Aluminium construction
More informationIncorporating V2.0. Product spec >>> > Series DD - Double deflection grilles
Incorporating V2.0 Product spec >>> > Series DD - Double deflection grilles Grilles Double deflection Recommended for: Wall, ceiling & duct Supply & extract Overview Enhanced functionality As per the name,
More informationC O L M A N. Air Distribution JET DIFFUSERS DCJ SERIES DCJ SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S JET DIFFUSERS DCJ SERIES DCJ SERIES DCJ SERIES JET DIFFUSERS Application Colman s DCJ jet diffuser has been designed to supply cooled
More informationMulticore diffusers. introduction. type control. options. finish. sizes SQUARE AND RECTANGULAR DIFFUSERS
SQUARE AND RECTANGULAR DIFFUSERS introduction The IC diffuser is a versatile form of air terminal offering the facility of multi directional throw patterns in a wide range of frame sizes. Each core style
More informationFloor diffusers. The art of handling air. Type FB. In aluminium and plastic
T.3//EN/ Floor diffusers Type FB In aluminium and plastic The art of handling air Contents Description Description Installation examples 3 Construction Dimensions Plenum box Load capacity Installation
More informationLinear Slot Diffusers Model Slot 20 and Model Slot 25
December 06 Linear Slot Diffusers Linear Slot Diffusers Model Slot and Model Slot 25 Features 1 to 8 Slots mm or 25mm Slot widths Ceiling or Sidewall Applications Modular or Continuous Lengths Curved Sections
More informationGrilles Linear Grilles
1/1.1/B/2 Grilles Linear Grilles Trox (U.K.) Ltd Caxton Way GB-Thetford Norfolk IP24 3SQ Telephone +44 (0)1842 754545 Telefax +44 (0)1842 763051 www.troxuk.co.uk e-mail: trox@troxuk.co.uk Contents Description
More informationLinear Slot Diffusers Model Slot 20 & Model Slot 25
Model Slot & Model Slot 25 Contents Introduction!!!!!! Page 3 Di"user Specification!!!! Page 4 Air Patterns!!!!!! Page 5 Flange Styles!!!!!! Page 6 Corner Sections!!!!! Page 7 Selection Procedure!!!! Page
More informationDRUM JET DIFFUSERS TYPE: DJA DJB DJAP DJBP
TYPE: DJA DJB DJAP DJBP APPLICATION Type DJ As with type AJ diffusers, this product is also designed to project large volumes of air over long distances, but particularly lends itself to sidewall or ductmounting,
More informationISF-AD. Inclined Floor Swirl Diffuser PRODUCT BROCHURE. Optional Features: Constant throw height adjustable airflow rate Electrical VAV operation
PRODUCT BROCHURE Inclined Floor Swirl Diffuser ISF-AD Optional Features: Constant throw height adjustable airflow rate Electrical VAV operation smartemp.com DESCRIPTION The SMARTEMP Inclined Floor Swirl
More informationLINEAR SLOT DUFFUSERS
LINEAR SLOT DUFFUSERS CE SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL 2AA Tel: 010 12 - Fax: 010 1 2 - email sales@jprservices.co.uk
More informationGDD - Supply Grille. Halton GDD. Supply Grille
Halton GDD Supply Grille Horizontal supply, for circular duct installations For cooling and heating applications; suitable also for exhaust Adjustable vertical front vanes, adjustable horizontal rear vanes
More informationActive Chilled Beams
T 2.4/3/EN/1 Active Chilled Beams Type DID00B TROX GmbH Telephone +49/2 45/2 02-0 Telefax +49/2 45/202-25 Heinrich-Trox-Platz e-mail trox@trox.de D-47504 Neukirchen-Vluyn www.troxtechnik.com Contents Description
More informationC O L M A N. Air Distribution PERFORATED FACE DIFFUSERS P SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S PERFORATED FACE DIFFUSERS P SERIES P SERIES PERFORATED FACE DIFFUSERS P SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application:
More informationTBV - Terminal Unit. Halton TBV. Terminal Unit
Halton TBV Terminal Unit Horizontal air supply, suitable also for exhaust Integrated rectangular balancing plenum with measurement and adjustment functions Effective sound attenuation Circular duct connection
More informationDisplacement flow diffusers. L e
Displacement flow diffusers L-08-1-04e Contents Application Safety instructions Contents Application Safety instructions 2 Construction Perforation Principle of operation Example of quick selection 3 Type
More informationOptima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:
Perforated Ceiling Diffusers OPTIMA ceiling diffuser with perforated face, are recoended for heating, ventilating and cooling in centralized air conditioning systems. Perforated face diffusers, with 4-3-
More informationAir Distribution SWIRL DIFFUSERS DW SERIES SERIES
COLMAN Air Distribution E N G I N E E R E D SWIRL DIFFUSERS DW SERIES DW SERIES A I R P R O D U C T S SWIRL DIFFUSERS DW SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application The DW type swirl diffuser
More informationEYELASH DIFFUSERS E SERIES. Quality and efficiency without compromise
EYELASH DIFFUSERS E SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 71526 - Fax: 01707 71 527 - email sales@jprservices.co.uk
More informationDFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser
Halton DFB Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket All sizes
More information