CONFIGURATION OF CABLE SUPPORT SYSTEMs

Transcription

1

2

3 CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3

4 SS249/ IEC COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#) Singapore Standard Height in inch Width in inch Colour(#): Orange (O), Red (R), Grey (GR), White (W), Beige (B) 2438 Material : Electroplated zinc/ zin phosphate or equivalent Standard : SS249: 1981 Class 1 MS IEC : 2006 Finish : Epoxy powder coated to a minimum of 50 micron (ASTM B-117) Std. Color : Grey, Orange, White, Red, Beige Std. Length : 2.44 meter Complete With : Coupler, Copper Link, Tapping Screw, Bolt & Nut (All dimension in mm) Singapore standard sizes, body and cover thickness 4 Product Nominal size Steel Thickness (mm) Approx. Weight Code W x H (mm) Body Cover Kgs Per Length SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x SS-CEE x Standard length of 2.44m

5 EPOXY STEEL CABLE TRUNKING (INDOOR USE) Standard Length Material Complete With : 2.44 meter : Cold Rolled Steel to JIS G3141 SPCC : Joint, Tapping Screw, Bolt & Nuts #Standard Colour : (O) Orange, (GR) Grey, (W)White (Please Specify If Others) ** Code to be replaced with desired thickness (0.6, 0.8, 1.0, 1.2 or 1.4) Note: Other requirements available upon request 2438 Recommended Materials and Type of Finishing Materials Galvanized Iron JIS G3302 SGHC Type of Finishing Cold Rolled Steel Epoxy Powder Coated to ASTM B-117 JIS G3141 SPCC Stainless Steel AISI 304, 316 or 316L Aluminium A1100 or Epoxy Powder Coated Product Code W x H Thickness (mm) (mm) (Inch) MT-021-** 50 x 25 2 x 1 0.6, 0.8, 1.0, 1.2 MT-022-** 50 x 50 2 x 2 0.6, 0.8, 1.0, 1.2 MT-032-** 75 x 50 3 x 2 0.6, 0.8, 1.0, 1.2 MT-042-** 100 x 50 4 x 2 0.6, 0.8, 1.0, 1.2 MT-052-** 125 x 50 5 x 2 0.6, 0.8, 1.0, 1.2 MT-062-** 150 x 50 6 x 2 0.6, 0.8, 1.0, 1.2 MT-033-** 75 x 75 3 x 3 0.6, 0.8, 1.0, 1.2 MT-043-** 100 x 75 4 x 3 0.6, 0.8, 1.0, 1.2 MT-053-** 125 x 75 5 x 3 0.8, 1.0, 1.2 MT-063-** 150 x 75 6 x 3 0.8, 1.0, 1.2 MT-083-** 200 x 75 8 x 3 0.8, 1.0, 1.2 MT-103-** 250 x x 3 1.0, 1.2 MT-123-** 300 x x 3 1.0, 1.2 MT-044-** 100 x x 4 0.8, 1.0, 1.2 MT-054-** 125 x x 4 0.8, 1.0, 1.2 MT-064-** 150 x x 4 0.8, 1.0, 1.2 MT-084-** 200 x x 4 0.8, 1.0, 1.2 MT-104-** 250 x x 4 1.0, 1.2 MT-124-** 300 x x 4 1.0, 1.2 MT-126-** 300 x x 6 1.0, 1.2 Note: Actual size is based on millimeter measurement. 5

6 HOT-DIP GALVANIZED/ Superdyma CABLE TRUNKING (OUTDOOR USE) 2438 Standard Length : 2.44 meter Material Finish Complete With : 1. Cold Rolled Steel to JIS G3141 SPCC 2. Superdyma, Nippon Steel STD : 1. Hot-Dip Galvanized (HD) to BS EN ISO1461: Superdyma (SD), : Joint, Tapping Screw, Bolt & Nut ** Code to be replaced with desired thickness (0.8, 1.0, 1.2, 1.4, 1.6 or 2.0) Note: Other requirements available upon request Product Code W x H Thickness (mm) (mm) (Inch) MT-021-**HD or SD 50 x 25 2 x 1 1.0, 1.2, 1.4/ 1.5 MT-022-**HD or SD 50 x 50 2 x 2 1.0, 1.2, 1.4/1.5 MT-032-**HD or SD 75 x 50 3 x 2 1.0, 1.2, 1.4/1.5 MT-042-**HD or SD 100 x 50 4 x 2 1.0, 1.2, 1.4/1.5 MT-052-**HD or SD 125 x 50 5 x 2 1.0, 1.2, 1.4/1.5 MT-062-**HD or SD 150 x 50 6 x 2 1.0, 1.2, 1.4/1.5 MT-033-**HD or SD 75 x 75 3 x 3 1.0, 1.2, 1.4/1.5 MT-043-**HD or SD 100 x 75 4 x 3 1.0, 1.2, 1.4/1.5 MT-053-**HD or SD 125 x 75 5 x 3 1.2, 1.4/ 1.5 MT-063-**HD or SD 150 x 75 6 x 3 1.2, 1.4/1.5 MT-083-**HD or SD 200 x 75 8 x 3 1.5/ 1.6 MT-103-**HD or SD 250 x x 3 1.5/ 1.6, 2.0 MT-123-**HD or SD 300 x x 3 1.5/ 1.6, 2.0 MT-044-**HD or SD 100 x x 4 1.2, 1.4/ 1.5 MT-054-**HD or SD 125 x x 4 1.2, 1.4/ 1.5 MT-064-**HD or SD 150 x x 4 1.2, 1.4/ 1.5 MT-084-**HD or SD 200 x x 4 1.5/ 1.6 MT-104-**HD or SD 250 x x 4 1.5/ 1.6, 2.0 MT-124-**HD or SD 300 x x 4 1.5/ 1.6, 2.0 MT-126-**HD or SD 300 x x 6 1.5/ 1.6, Note: Actual size is based on millimeter measurement.

7 STANDARD & CUSTOMISED CABLE TRUNKING FITTINGS FLATWISE TEE FLATWISE CROSS OUTSIDE RISER REDUCER FLATWISE ELBOW INSIDE RISER TURN BUCKLE CABLE TRUNKING MULTI-COMPARTMENT CABLE TRUNKING INNER BRACKET ON TRUNKING BASE 7

8 STANDARD STRAIGHT EDGE PERFORATED Cable Tray STANDARD LENGTH (All dimension in mm) Recommended Materials and Type of Finishing Materials Galvanized Iron JIS G3302 SGHC Cold Rolled Steel JIS G3141 SPCC Type of Finishing Epoxy Powder Coated to ASTM B-117 or Hot-Dip Galvanized after fabrication to BS EN ISO1461: 1999 Electroplated zinc coated Epoxy Powder Coated to ASTM B-117 JIS G3313 SECC Stainless Steel Grade AISI 304, 316 or 180 Superdyma NIPPON Steel STD 8

9 STANDARD STRAIGHT EDGE PERFORATED Cable Tray sizes & fittings Standard Sizes of Epoxy Powder Coated Cable Tray Width (mm) Product Thickness Flange (W) Code 0.8mm 1.0mm 1.2mm 1.4mm 1.6mm 2.0mm Height (mm) 50 CT-02** * * * * CT-03** * * * * CT-04** * * * * CT-06** * * * * * CT-08** * * * * * CT-10** * * * * * CT-12** * * * * * CT-14** * * * * CT-16** * * * * CT-18** * * * * CT-20** * * * * CT-22** * * * * CT-24** * * * * CT-30** * * CT-32** * CT-36** * CT-40** * 30 * Indication of the gauge of material. Standard Sizes of Superdyma/ Hot-Dip Galvanized Cable Tray Width (mm) Product Thickness Flange (W) Code 1.0mm 1.2mm 1.4mm 1.5/ 1.6mm 2.0mm Height (mm) 50 CT-02** * * * CT-03** * * * CT-04** * * * CT-06** * * * * CT-08** * * * CT-10** * * * * CT-12** * * CT-14** * * CT-16** * CT-18** * CT-20** * CT-22** * CT-24** * CT-30** * CT-32** * CT-36** * CT-40** * 30 * Indication of the gauge of material. ELBOW CROSS INSIDE RISER OUTSIDE RISER TEE REDUCER 9

10 return flange TYpe/ trough type PERFORATED Cable Tray RETURN FLANGE TYPE 2438 Standard Sizes Gauge/ Width Thickness Product (mm) (mm) Code Fishplate Connector RETURN FLANGE TYPE RFT- 06**-## RFT- 08**-## RFT- 12**-## RFT- 16**-## RFT- 24**-## RFT- 32**-## RFT- 40**-## Remark: **Thickness, ##Flange Height (Optional) TROUGH TYPE Joint W R3x14 R2.5x13 25 Body R3 R3x14 R3.5x25 Standard Length : 2438 Standard Sizes Gauge/ Width Thickness Product (mm) (mm) Code MTCT- 06**-## MTCT- 08**-## MTCT- 12**-## MTCT- 16**-## MTCT- 24**-## MTCT- 32**-## MTCT- 40**-## TROUGH TYPE Remark: **Thickness, ##Flange Height Recommended Materials and Type of Finishing Materials Type of Finishing Galvanized Iron JIS G3302 SGHC Cold Rolled Steel JIS G3141 SPCC Epoxy Powder Coated to ASTM B-117 or Hot-Dip Galvanized after fabrication BS EN ISO1461: 1999 Electroplated zinc coated Epoxy Powder Coated to ASTM B-117 JIS G3313 SECC Stainless Steel Grade AISI 304, 316 or 180 Superdyma NIPPON Steel STD 10

11 return flange/ trough type perforated cable tray FITTINGS Product W L1 L2 t Code (mm) (mm) (mm) (mm) RFT-BEND RFT-BEND RFT-BEND RFT-BEND RFT-BEND Product W L1 L2 t Code (mm) (mm) (mm) (mm) RFT-IR RFT-IR RFT-IR RFT-IR RFT-IR Product W L1 L2 t Code (mm) (mm) (mm) (mm) RFT-EB RFT-EB RFT-EB RFT-EB RFT-EB Product W L1 L2 t Code (mm) (mm) (mm) (mm) RFT-T RFT-T RFT-T RFT-T RFT-T Product W L1 L2 t Code (mm) (mm) (mm) (mm) RFT-ER RFT-ER RFT-ER RFT-ER RFT-ER Product W L1 t Code (mm) (mm) (mm) RFT-CRS RFT-CRS RFT-CRS RFT-CRS RFT-CRS

12 KNOCK DOWN TYPE CABLE LADDER STRAIGHT LENGTH (All dimension in mm) Standard Length Recommended Materials and Type of Finishing Materials Type of Finishing Cold Rolled Steel Epoxy Powder Coated to ASTM B-117 JIS G3302 SGHC Electroplated zinc coated Epoxy Powder Coated to ASTM B-117 JIS G3313 SECC : 2.44 or 3.0 meter Standard Material : Cold Rolled Steel 2.0mm (Side Rail) Complete with & 1.5mm (Rung) JOINT PLATE : Joint Plate, Bolt & Nut, Copper Link RUNG SLOTS DIMENSIONS (Straight Ladder) Product Std. Width Code (mm) inch KDL KDL KDL KDL KDL KDL KDL KDL Note: Actual size is based on millimeter measurement. Stainless Steel Grade AISI 304, 316 or 180 Superdyma NIPPON Steel STD 12

13 WELDED TYPE CABLE LADDER Inward C Type Outward C Type Standard Length 2438 / 3000 Standard Length 2438 / 3000 JOINT PLATE Z- Type Standard Length 2438 / 3000 (All dimension in mm) Standard Length : 2.44 or 3.0 meter Standard Material : Cold Rolled Steel 2.0mm (Side Rail) & 1.5mm (Rung) Complete with : Joint Plate, Bolt & Nut, Copper Link Product Std. Width Approx. Weight Code (mm) inch Kgs/Length WDL WDL WDL WDL WDL WDL WDL WDL Note: Actual size is based on millimeter measurement. Recommended Materials and Type of Finishing Materials Type of Finishing Cold Rolled Steel Epoxy Powder Coated to ASTM B-117 or JIS G3302 SGHC Hot Dip Galvanized after fabrication to BS EN ISO1461: 1999 Electroplated zinc coated Epoxy Powder Coated to ASTM B-117 JIS G3313 SECC Stainless Steel Grade AISI 304, 316 & 180 Superdyma NIPPON Steel STD 13

14 CABLE LADDER FITTINGS Reference No. W (mm) R (mm) A (mm) WDL/KDL-CRS WDL/KDL-CRS WDL/KDL-CRS WDL/KDL-CRS WDL/KDL-CRS WDL/KDL-CRS WDL/KDL-CRS Reference No. W (mm) L1 (mm) L2 (mm) R (mm) WDL/KDL-T WDL/KDL-T WDL/KDL-T WDL/KDL-T WDL/KDL-T WDL/KDL-T STANDARD INSIDE RISER (STD) BEND INSIDE RISER STANDARD OUTSIDE RISER (STD) BEND OUTSIDE RISER Reference No. W (mm) H (mm) R (mm) WDL/KDL-IR WDL/KDL-IR WDL/KDL-IR WDL/KDL-IR WDL/KDL-IR WDL/KDL-IR WDL/KDL-IR Reference No. W (mm) H (mm) R (mm) WDL/KDL-ER WDL/KDL-ER WDL/KDL-ER WDL/KDL-ER WDL/KDL-ER WDL/KDL-ER WDL/KDL-ER Available in 30, 45, 60, 90 BEND ANGLE (ELB) Reference No. Bend Angle W (mm) R (mm) WDL/KDL-EB WDL/KDL-EB WDL/KDL-EB WDL/KDL-EB WDL/KDL-EB WDL/KDL-EB WDL/KDL-EB Reference No. W1 (mm) W2 (mm) WDL/KDL-RD 18/ WDL/KDL-RD 24/ WDL/KDL-RD 24/ WDL/KDL-RD 30/ WDL/KDL-RD 30/ WDL/KDL-RD 30/ WDL/KDL-RD 36/ WDL/KDL-RD 36/ WDL/KDL-RD 36/ WDL/KDL-RD 36/ HORIZONTAL ADJUSTABLE LADDER JOINT 14

15

16