Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray

Transcription

1 Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing ends making for cost efficient installation by eliminating the need for additional materials - Perforated tie off points at 25mm continuous centres offering superior ventilation & efficient use of tray width - Reverse punched to ensure burr free cable laying surface - A full range of fittings available - Cable ladder light duty type 2/3 sheet steel - Hot dip galvanized after fabrication to AS/NZS mm spacing with slotted rungs standard - 4 mm cable laying depth - 6 mm standard joining together by quick fix splice plate with no side rail holes. - 15mm, 3mm, 45mm & 6mm standard widths - A full range of fittings are available e.g. bends, risers, tees, crosses & reducers. - Cable ladder-medium to heavy duty type 3/5 NEMA - Steel sheet Classification 16A - Hot dip galvanised after fabrication to AS/NZS mm spacings with slotted rungs standard - 76 mm cable laying depth - 6 mm standard, joining together by full strength splice plates - 15mm, 3mm, 45mm & 6mm standard widths - A full range of fittings are available e.g. bends, risers, tees, crosses & reducers. - 6m length - K series channel is manufactured from 2.5mm Steel or 2.mm 316 Grade Stainless Steel - Slotted option available - Special cut to length sizes available on request - Spring nuts, nuts, bolts & fittings in stock - Welded combination channel available on request - Painted finish available on request - 3m length - KT3 Ladder Tray - 5mm high sides - KT5 Ladder Tray - 85mm high sides - Made from.75mm base Material - Available in Galvabond or Hot Dipped Galvanised Mild Steel - Perforated tie off points at 2mm centres enabling imum use of tray width as well as superior ventilation Hunter Engineering Sales 29 Torrens Ave Cardiff NSW Ph

2 Admiralty Pattern Tray 2 x 8 mm Slots M6 nut & M6 x 12 Pan Head Screw Fixings included Joggled End Provision for Nylon Fixings The Admiralty Pattern Tray System was developed for use in general applications where installers are looking for an economical option for cable management. The fi nished product is constructed from.55mm base material of which there are two options; Galvabond and post production Hot Dip Galvanised surface treatment. Both of which offer the following features: 2.4m length, 14mm side Self-splicing ends making for cost efficient installation by eliminating the need for additional materials Perforated tie off points at 25mm continuous centres offering superior ventilation and efficient use of tray width Reverse punched to ensure burr free cable laying surface A full range of fittings available (made to order) Painted fi nish is available on request. Range KAP KAP = Admirality Pattern Tray Type T T = Tray TB = Bend TT = Tee TC = Cross TRX = External Riser TRI = Internal Riser Size 7 7 = 75 mm 1 = mm 15 = 15 mm 23 = 23 mm 3 = 3 mm Finish G G = Galvabond H = Hot Dip Galv P = Painted Fittings can be site manufactured utilizing the tray. Factory made fi ttings can be manufactured on request. Standard Fittings Radius 3 mm. Ordering example shown Admiralty Pattern tray 75 mm Galvabond Hunter Engineering Sales 29 Torrens Ave Cardiff NSW Ph

3 Cable Ladder Type 2/3 1.6 mm Steel Cable Ladder Type 2/ mm Cable Laying Depth 2 x 8 25 Ctrs Welded Rungs 65 'W' 3 Nom CABLE LADDER Class Designation: Material: Finish: Rung Spacing: Inside Depth: Stock Lengths: Stock Widths: Fittings: Radius: Accessories: 65 Cable Sheet steel 'W' 3 mm spacing with slotted rungs standard. 4 mm cable laying depth 15 mm, 3 mm, 45 mm & 6 mm standard other widths available on request. A full range of fi ttings are available e.g. bends, risers, tees, crosses & reducers. NOTE: Ladder meets class designation in NEMA standard 3 mm radius for standard fi ttings. Other radius fi ttings are available and made to fi rm orders. Light Duty Type 2/3 Cable Ladder Span (mm) Allowable loads are determined generally in accordance with NEMA requirements testing. Safety factor = 1.5 over collapse load for single span m Span 2.4 m Span 3.6 m Span Deflection (mm) m Span 4.8 m Span 6. m Span Deflection (mm) Defl ections shown apply to the end bays (worst case) of a continuous ladder run. To fi nd defl ection of a single span, multiply by 2.5 Range Type Size Finish 2C L 15 H L = Straight Length 15 = 15 mm H = Hot Dip Galv 3 = 3 mm P = Painted 45 = 45 mm 6 = 6 mm Ordering example shown 2/3 Cable Ladder 15 mm Wide Hot Dip Galvanised Hunter Engineering Sales 29 Torrens Ave Cardiff NSW Ph

4 Cable Ladder Medium To Heavy Duty Type 3/5 (NEMA 16A) 1.6 mm Steel Cable Ladder Type 3/5 2 3 Nom 24 3 Nom 76 mm Cable Laying Depth Welded Earth Strap Hole Rung Rail Out Earth Strap Hole Rail In 6 Class Designation: classifi cation 16A. Material: Steel sheet. Finish: Rung Spacing: Inside Depth: Stock Length: Stock Widths: Fittings: Radius: Accessories: 3 mm spacings with slotted rungs standard. 6 mm standard, joining together by full strength splice plates. 15 mm, 3 mm, 45 mm & 6 mm standard other widths available by request. A full range of fi ttings are available e.g. bends, risers, tees, crosses & reducers. 3 mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. barrier strips and hold down clamps. 6 2 x 8 25 Ctrs Span (mm) 2 4. m Span 4.8 m Span 6. m Span Deflection (mm) NOTE: Ladder designation 16A in NEMA standard Basic loading Allowable loads are determined generally in accordance with NEMA requirements testing. Safety factor = 1.5 over collapse load for single span. Deflections shown apply to the end bays (worst case) of a continuous ladder run. To find deflection of a single span, multiply by 2.5. CABLE LADDER Medium to Heavy Duty Type 3/5 Cable Ladder Range Type Size Finish Rail Direction 3C L 15 H RI L = Straight Length 15 = 15 mm H = Hot Dip Galv 3 = 3 mm P = Painted 45 = 45 mm 6 = 6 mm Ordering example shown 3/5 Cable Ladder 15 mm Wide Hot Dip Galvanised Rail In Hunter Engineering Sales 29 Torrens Ave Cardiff NSW Ph

5 KT3 Ladder Tray KT3 Ladder Tray Width + 24 mm ie: 3 Wide + 24 mm = 324 mm 5 CABLE TRAY KT3 Ladder Tray kg 57.5 kg 4 kg SPAN (m) 38.8 kg Allowable loads are determined generally in accordance with NEMA requirements testing. Safety factor = 1.5 over collapse load for single span M Span 2. M Span 2.4 M Span 3. M Span DEFLECTION (mm) Defelections shown apply to single spans. Defelections for the end span of a continuous run will be significantly less (up to half of the above values depending on actual loading). of Kounis Ladder Tray. All results were determined testing on single spans and include a Safety factor for allowable loading. For a continuous tray installation the loads shown can be factored up for installation guidelines. Range Type Size Finish KT 3 15 G KT = Ladder Tray G = Galvabond H = Hot Dip Galv P = Painted Ordering example shown Ladder Tray 5 mm High Side 15 mm Wide Galvabond Hunter Engineering Sales 29 Torrens Ave Cardiff NSW Ph

6 KT5 Ladder Tray KT5 Ladder Tray CABLE TRAY Width + 24 mm ie: 3 Wide + 24 mm = 324 mm KT5 Ladder Tray kg 67.6 kg SPAN (m) 47.2 kg Allowable loads are determined generally in accordance with NEMA requirements testing. Safety factor = 1.5 over collapse load for single span M Span 2.4 M Span 3. M Span DEFLECTION (mm) 2 Defelections shown apply to single spans. Defelections for the end span of a continuous run will be significantly less (up to half of the above values depending on actual loading). of Kounis Ladder Tray. All results were determined testing on single spans and include a Safety factor for allowable loading. For a continuous tray installation the loads shown can be factored up for installation guidelines. Range Type Size Finish KT 5 15 G KT = Ladder Tray 5 = (85 mm High Side) G = Galvabond H = Hot Dip Galv P = Painted Ordering example shown Ladder Tray 85 mm High Side 15 mm Wide Galvabond Hunter Engineering Sales 29 Torrens Ave Cardiff NSW Ph