ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
|
|
- Rose Dennis
- 6 years ago
- Views:
Transcription
1 ABN SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No EDITION 2
2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type 5/112 (NEMA 16A) MEDIUM TO HEAVY DUTY (NEMA 2B) HEAVY DUTY (NEMA 2C) EXTRA HEAVY DUTY > 4:3 > 4:4 > 4:5 Type 4/7 Type 3/5 Type 5/112 (NEMA 12A) MEDIUM DUTY (NEMA 2A/16B) HEAVY DUTY (NEMA 2C) EXTRA HEAVY DUTY > 4:7 > 4:8 > 4:9 Ladder Splice Plates > 3:18 Page 4:1
3 Cable Ladder General Description The Kounis Metal Industries Cable Ladder Systems were developed for use in commercial, industrial & mining applications where the surrounding environment calls for a higher level of protection against corrosion. Its superior support strength and open ventilation allows for effortless installation of electrical cables and or pipe work. Cable Ladder General Description The finished product is constructed from 316 Grade side rail sections and rungs welded at mm continuous spacings. Surface treatment is post production pickling and passivation with the focus of ensuring all weld joints are clean to achieve a maximum life span from the installation. This product range comprises of three system types to cover a wide range of requirements; Type 3/5 Medium to Heavy Duty mm Side (NEMA 16A), Type 4/7L Heavy Duty 13 mm Side and Type 5/112 Extra Heavy Duty 146 mm Side (NEMA 2C). All of which offer the following standard features: 6 m lengths Self-splicing Bend, Riser, Tee & Cross Fittings. Rail in or rail out option ing holes at point of connection on straight lengths as well as fittings Channel type rung offering superior strength 25 mm rung tie off centres to allow maximum tie off options Hold Down Clamps assemblies with nylon isolation pads and bushes are available for dissimilar materials. A full range of flat and peak covers are available for straight lengths and fittings Engineer certification to withstand certain cyclonic conditions (only available for Type 4/7 & 5/112, minimum installation requirements apply). All fitting radius measurements are to the internal side rail, stock standard radius varies depending on cable ladder system type and branch standard. All other listed radius options are made to firm order. Load capacities and deflection graphs are published by type and can be found on the straight length page for the associated cable ladder system. Tested to NEMA VE1-22 Standards. Full engineering details are available on request. Page 4:2
4 Cable Ladder Medium To Heavy Duty Type 3/5 16A 1.6 mm 316 Grade Cable Ladder Type 3/ mm Cable 6 2 x 8 25 Ctrs 6 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 78kg/m on 4.8m spans Class Designation: Cable ladder-medium to heavy duty type 3/5. Material: 316 stainless steel sheet. Natural. Spacing: mm spacings with slotted rung standard. Inside Depth: 76 mm cable laying depth. Stock Length: 6 mm standard, joining together by full strength splice plates Stock Widths: 15 mm, mm, 45 mm & 6 mm standard. Other widths available by request. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps (Tested by Curtin University to NEMA 113 standards) full engineering = 1.5 over details collapse available. 78 load for single span Medium to Heavy Duty Type 3/5 Cable Ladder 3C L 15 S K RI or RO 3C = 3/5 mm High Side 1.6 mm Gauge L = Straight 6 metre Length 15 = 15 mm 316 Grade RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm K = Includes all Standard Supply is Mill Finish ORDERING EXAMPLE SHOWN: 3/5 Cable Ladder 15 mm wide x 6 metre 316 c/w Splice Plates Bolts and Nuts Page 4:3
5 Cable Ladder Heavy Duty Type 4/7L 2B 1.6 mm 316 Grade Cable Ladder Type 4/7L mm Cable. 6 2 x 8 25 Ctrs NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 95kg/m on 6m spans. Heavy Duty Type 4/7L Cable Ladder 13 Class Designation: Material: Spacing: Inside Depth: Stock Length: Stock Widths: Accessories: Cable ladder heavy duty type 4/7L. 316 stainless steel sheet. Natural. mm spacings with slotted rung standard. 15 mm cable laying depth. 6 mm standard, joining together by full strength splice plates. 15 mm, mm, 45 mm and 6 mm standard. Other widths available by request. A full range of fittings are available e.g bends, risers, tees, crosses & reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps = 1.5 over collapse 2 load for single span. 148 (Tested by Curtin University to NEMA standards) full engineering details available CL L 15 S K RI or RO 4CL = 4/7L 13 mm High Side 1.6mm Gauge L = Straight 6 metre Length 15 = 15 mm 316 Grade RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm K = Includes all Standard Supply is Mill Finish ORDERING EXAMPLE SHOWN: 4/7L Cable Ladder 15 mm wide x 6 metre 316 c/w Splice Plates Bolts and Nuts Page 4:4
6 Cable Ladder Extra Heavy Duty Type 5/112 2C 2. mm 316 Grade Cable Ladder Type 5/ mm Cable 6 2 x 8 25 Ctrs Class Designation: Cable ladder extra heavy duty type 5/112. Material: 316 stainless steel sheet. Natural. Spacing: mm spacings with slotted rung standard. Inside Depth: 12 mm cable laying depth. Stock Length: 6 mm standard, joining together by full strength splice plates. Stock Widths: 15 mm, mm, 45 mm and 6 mm standard. Other widths available by request. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 14kg/m on 6m spans. = 1.5 over collapse load for single span. Extra Heavy Duty Type 5/112 Cable Ladder 5C L 15 S K RO 5C = 5/ mm High Side 2. mm Gauge L = Straight 6 metre Length 15 = 15 mm 316 Grade RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm K = Includes all Standard Supply is Mill Finish ORDERING EXAMPLE SHOWN: 5/112 Cable Ladder 15 mm wide x 6 metre 316 c/w Splice Plates Bolts and Nuts. Page 4:5
7 Cable Ladder General Description The Kounis Group Cable Ladder Systems are developed for use in commercial, industrial & mining applications. Its superior support strength and open ventilation allows for effortless installation of electrical cables and or pipe work. The finished product is constructed from Grade 616 T6 Extruded Alloy side rail sections has rungs welded at mm continuous spacings. Ladders have a post production treatment with the focus on ensuring all weld joints are clean to achieve a maximum life span from the installation. This product range comprises three system types to cover a wide range of requirements; Type 3/5 Medium Duty 9 mm Side (NEMA 12A), Type 4/7 Heavy Duty 13 mm Side (NEMA 16B and NEMA 2A) and Type 5/112 Extra Heavy Duty 155 mm Side (NEMA 2C). All of which offer the following standard features: 6 m length Self-splicing Bend, Riser, Tee & Cross Fittings Cable Ladder General Description ing holes at point of connection on straight lengths as well as fittings Channel type rungs offering superior strength 25 mm rung tie off centres to allow maximum tie off options Use of stainless steel fixings required A full range of flat and peak covers are available for straight lengths and fittings All fitting radius measurements are to the internal side rail, stock standard radius varies depending on cable ladder system type and branch standard. All other listed radius options are made to firm order. Load capacities and deflection graphs are published by type and can be found on the straight length page for the associated cable ladder system. Tested to NEMA VE1-22 Standards, Full engineering details are available on request. Page 4:6
8 Cable Ladder Medium Duty Type 3/5 12A Grade 616 T6 Cable Ladder Type 3/ mm Cable x 8 25 Ctrs 9 9 s in Place Class designation: Cable ladder medium duty type 3/5. Material: 616-T6 Marine Grade Aluminum Alloy Grade 316 fastenings Standard Mill Finish spacing: mm spacings with slotted rungs standard. Inside depth: 63 mm cable laying depth. Stock length: 6 mm standard, joining together by full strength splice plates Stock widths: 15 mm, mm, 45 mm and 6 mm standard. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. 6 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 74kg/m on 4m spans = 1.5 over collapse load for single span. Medium Duty Type 3/5 Cable Ladder 3C L 15 A K RI or RO 3C = 3/5 9mm High Side Extrusion L = Straight 6 metre Length 15 = 15 mm A = 616-T6 K = includes all RI = RO = NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm Standard supply is Mill Finish ORDERING EXAMPLE SHOWN: 3/5 Cable Ladder 15 mm wide x 6 metre c/w Splice Plates Bolts and Nuts Page 4:7
9 Cable Ladder Heavy Duty Type 4/7 2A/16B Grade 616 T6 Cable Ladder Type 4/ mm Cable 6 2 x 8 25 Ctrs Heavy Duty Type 4/7 616 T6 Cable Ladder Class designation: Cable ladder heavy duty type 4/7. Material: 616-T6 Marine Grade Aluminum Alloy Grade 316 fastenings Standard Mill Finish spacing: mm spacings with slotted rungs standard. Inside depth: 15 mm cable laying depth. Stock length: 6 mm standard, joining together by full strength splice plates Stock widths: 15 mm, mm, 45 mm and 6 mm standard. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. 6 NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 79kg/m on 6m spans. 121kg/m on 4.8m spans = 1.5 over collapse load for single span. (Tested by Curtin University to NEMA standards) full engineering details available C L 15 A K RI or RO 4C = 4/7 13 mm High Side Extrusion L = Straight 6 metre Length 15 = 15 mm A = 616-T6 K = includes all RI = RO = rail Out NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm Standard supply is Mill Finish ORDERING EXAMPLE SHOWN: 3/5 Cable Ladder 15 mm wide x 6 metre c/w Splice Plates Bolts and Nuts Page 4:8
10 Cable Ladder Extra Heavy Duty Type 5/112 2C Grade 616 T6 Cable Ladder Type 5/ mm Cable NOM "W" "W" Strap Hole 2 x 8 Ctrs 156. "W" NOM Strap Hole 6 Class designation: Cable ladder extra heavy duty type 5/112. Material: 616-T6 Marine Grade Aluminum Alloy Grade 316 fastenings Standard Mill Finish spacing: mm spacings with slotted rungs standard. Inside depth: 13 mm cable laying depth. Stock length: 6 mm standard, joining together by full strength splice plates Stock widths: 15 mm, mm, 45 mm and 6 mm standard. A full range of fittings are available e.g bends, risers, tees, crosses and reducers. mm radius standard for rail in. 45 mm radius standard for rail out. Other radii available by request. Accessories: Flat or peak covers available for ladders and fittings. Barrier strips. Hold down clamps. NOTE: Ladder tested according to NEMA Standard VE1-22 with basic load capacity as shown. 14kg/m on 6m spans = 1.5 over collapse (Tested by Curtin University to NEMA standards) full engineering load for details single span. available Extra Heavy Duty Type 5/ T6 Cable Ladder 5C L 15 A K RI or RO 5C = 5/ mm L = Straight 6 metre Length 15 = 15 mm A = 616-T6 K = includes all High Side Extrusion NOTE: Ladder (RI) is a Kounis standard and will not show in a supply code. All ladder will have a RO suffix shown in all supply codes. 3 = mm 45 = 45 mm 6 = 6 mm 75 = 75 mm 9 = 9 mm RI = RO= Standard supply is Mill Finish Ordering example shown 5/112 Cable Ladder 15mm wide x 6 metre c/w Splice Plates Bolts & Nuts Page 4:9
11 Notes (Stainless & ) Page 4:1
ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 5 Structural Cable Ladder Systems A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 5: Structural Cable Ladder
More informationCable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray
www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 6 Cable Ladder Covers A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 6: Cable Ladder Covers Flat Cover
More informationSECTION 2: Cable Tray
SECTION 2: Cable Tray Admiralty Pattern Tray Continuous Punch Cable Tray Light Duty Tray > 2:3 > 2:5 > 2:7 CT Heavy Duty Cable Tray Ladder Tray Ladder Tray Accessories > 2:10 > 2:13 > 2:15 Ladder Tray
More informationElectrical Cable. Support Systems. Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 Electrical Cable Support Systems A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 ABN 43 008 701 335 ACN 008 701 335 Page
More informationSeries 2, 3, 4, & 5 Aluminum - Straight Sections
- Straight Sections I-1 B-Line series Cable Tray Systems - Accessories For Aluminum Fittings see fittings section pages L-1 thru L-17 How The Service Advisor Works We know that your time is important!
More informationCable ladder systems. Development and testing
Cable ladder systems Metsec cable ladder systems have been developed to provide cost effective solutions for the support of cables in a wide range of market sectors. These sectors include: * Coercial *
More informationCERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY ALUMINIUM CABLE LADDER CABLE TRUNKING PRODUCT CATALOGUE Electrical Cable Containment REGISTERED COMPANY Mechanical Support
More informationSeries 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationSeries 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationChannel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
More informationSeries 3 & 4 Stainless Steel - Accessories
Splice Plates Standard 8-hole pattern for all stainless steel splice plates. One pair including hardware provided with straight section. Boxed in pairs with hardware. Expansion Splice Plates Expansion
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationNEMA CABLE LADDER [GENERAL INFORMATION]
NEMA CABLE LADDER [GENERAL INFORMATION] Cable Support Systems NEMA Cable Ladder Cable Tray Acrofil ire Basket Brackets & Supports Unistrut manufactures and markets the largest range of cable ladder systems
More informationI N D U S T R I E S, I N C. MARINE I-BEAMS LADDER SYSTEMS
CHANNEL-TRACK & TUBE-WAY MARINE I-BEAMS LADDER SYSTEMS I-Beam Siderail Ladder Cable Tray End View 1.5".595" 4.188".344" 1.039" 1.5" 4 Siderail Example Rung Detail.85" Features: 1. Siderail is roll formed
More informationCable Cleats. Trefoil Cable Cleat with LSF Pad. 55mm CC-2
CC-1 Trefoil Cable Cleat with LSF Pad 1. Recommended for installations where the highest levels of short circuit withstand are required. 2. Short circuit current tested in accordance with BS EN 50368:2003
More informationCable Ladder System for Ships
Cable Ladder System for Ships Our product range specially designed for installation in ships is available in two distinctive types: RZE-R is a cable ladder with a smart design which reduces the need for
More informationCATALOGUE ELECTRICAL
CATALOGUE B R AT IN SIN C E 1 9 2 4 G 90 YEARS ST LE RU CE T ELECTRICAL O F SINCE 1924 NEMA CABLE LADDER - GENERAL INFORMATION Unistrut also manufactures and markets the largest range of cable ladder systems
More informationCable Support Systems FIRST CHOICE FOR TRAY LADDER STRUT HYGROUND CABLE MESH
Cable Support Systems FIRST CHOICE FOR TRAY LADDER STRUT HYGROUND CABLE MESH Queensland Brisbane Branch Townsville Branch 161 Jackson Road 75-81 Toll Street Sunnybank Hills Mount St John Queensland, 4109
More informationCable Fixing. Cable Fixing. Cable Tray Systems
220 Trefoil Cable Cleat with LSF Pad 1. Cable Cleats are recommended for installations where the highest levels of short circuit withstand are required. 2. Cable Cleats have been short circuit current
More informationSeries 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
More informationSteel Ladder Cable Trays & Accessories
Steel Ladder Cable Trays & Accessories CONTACT GIGA Enterprises Mr. Kostas Samaras Thermaikou 54, Nea Efkarpia 56429 Thessaloniki, Greece Email: info@gigaenterprises.com Phone: +30 698 695 9164 Website:
More informationSeries 1 Steel - Straight Sections
LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that
More informationProduct Catalogue. Cable Management Solutions
Product Catalogue Cable Management Solutions Cable management solutions Introduction Cable ladder & accessories Perforated tray & accessories Trunking & accessories Channel tray & accessories Superstrut
More informationTraction Tread Grating - Design Load Table of Contents & Advantages
- Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57
More informationCTSCL-10. Steel Cable Ladder Cable Support Systems
TSL-10 Steel able Ladder able Support Systems Tray onstruction I-Beam Side Rails ooper B-Line s I-Beam siderails are an integral part of all 2, 3, 4, and 5 series ladder trays. The I-Beam is ideal for
More informationSeries 1 Steel - Accessories
- ccessories Standard (L-Shaped) Splice Plates One pair including hardware provided with each section. Prepackaged in pairs in a plastic bag, with hardware. 4-hole pattern L-shaped splice plates. L-shaped
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CLE MNGEMENT SOLUTIONS CTLOGUE2003/04 COMPLETE CLE MNGEMENT SOLUTION FOR COMMERCIL ND INDUSTRIL PPLICTIONS www.legrand.co.uk FSTRCK F31 FSTRCK F31 SYSTEM STEEL WIRE CLE TRY Legrand With a large range of
More information# INDEX. Created on: Revised on: N/A Cable Trays Manual 1 ABBREVIATIONS 2 SYSTEM COMPONENTS 3 DEFNITIONS 4 MATERIAL & FINISH OPTIONS
# INDEX 1 ABBREVIATIONS 2 SYSTEM COMPONENTS 3 DEFNITIONS 4 MATERIAL & FINISH OPTIONS 5 GENERAL INFORMATION 6 ADAPTATION TO NEMA STANDARDS 7 CABLE TRAYS 8 CABLE LADDERS 9 ACCESSORIES 10 SUPPORTS 11 INSTALLATION
More informationCABLE LADDERS CATALOGUE
CABLE LADDERS CATALOGUE CONTENT INTRODUCTION 5 TECHNICAL INFORMATION 13 CABLE LADDER TRAY OVERVIEW 47 ALUMINUM LADDERS 57 STEEL LADDERS 65 LADDER FITTINGS 83 LADDER TYPE ACCESSORIES 89 FIXING ACCESSORIES
More informationT&B Cable Tray. In this section...
In this section... T& Cable Tray T& Cable Tray Overview... -260-261 luminum Tray... -262-309 Steel Tray... -310-333 One-Piece Tray... -334-357 Channel Tray... -358-373 Common ccessories... -374-376 Grounding
More informationHusky Ladder Flange In
CABLE CABLE TRAY BUS Husky Ladder Flange In In Steel & Aluminum Selection Tables Pg. 37 Numbering System Pg.38 ing Tables Pgs.39-44 36 CABLE TRAY Selection Tables (For actual loading capacity see Tables
More informationINDUSTRIAL-STRENGTH SOLUTIONS FOR EVERY ACCESS POINT psaccesssolutions.com
INDUSTRIAL-STRENGTH SOLUTIONS FOR EVERY ACCESS POINT 877.446.1519 psaccesssolutions.com 4psinfo@psindustries.com INDUSTRIAL DOORS SWING DOORS Our swing doors are built to withstand rigorous industrial
More informationCable Tray CT2D-18. Tray2Day SM. cable tray service program
Cable Tray CT2D-18 Tray2Day SM cable tray service program * * At, we believe that power is a fundamental part of just about everything people do. That s why we re dedicated to helping our customers s find
More informationSwifts SW. strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE
Swifts S strength, speed and flexibility STEEL IRE CABLE TRAY / PRODUCT GUIDE Global vision... 2st Century solutions Established in the UK since 972, Legrand is a world leading manufacturer of products
More informationPRODUCT CATALOGUE - CABLE TRAYS
PRODUCT CATALOGUE - CABLE TRAYS 098711969 shivshaktiindustries.delhi@gmail.com S. S. Engineering, B-2621, DSIDC Complex, Narela Industrial Area, New Narela, Delhi-140 Table of Contents Perforated Cable
More informationSPAN 400 SPAN 400. Data Sheet. SPAN 400 Data Sheet Revision: 0 Date: 24/09/2008 Copyright 2008 Instant UpRight Limited
Data Sheet SPAN 400 SPAN 400 Data Sheet - 0 - Revision: 0 HORIZONTAL BRACE 223 2.0 m Horizontal Brace 1912 1.7 105 2.5 m Horizontal Brace 2496 2.0 221 3.0 m Horizontal Brace 3048 2.4 Tube - Material :
More informationSafety Grating DIAMOND-GRIP PRODUCT DESCRIPTION FEATURES & BENEFITS MATERIAL SPECIFICATIONS. Note:
DIAMOND-GRIP PRODUCT DESCRIPTION Diamond-Grip is a one-piece metal plank grating manufactured by a cold forming process in the shape of a channel. The web of the channel is the walking surface and has
More informationINDUSTRIAL STRENGTH SOLUTIONS FOR EVERY ACCESS POINT. Check out these other product lines from PS DOORS. INDUSTRIAL DOORS SWING DOORS SLIDING DOORS
INDUSTRIAL DOORS HATCHGRIP Our swing doors are built to withstand rigorous industrial environments. These doors have a proven track record in power plants, mines, mills and manufacturing facilities. Available
More informationSwifts XRF extra heavy duty return flange straight lengths
Swifts F extra heavy duty return flange straight lengths and weights Loading graphs Load tests carried out to BS EN 61537 The loads shown on all graphs are the safe recommended maximum loads that can be
More informationADDER SYSTEM CABLE L
17 Introduction CALE LADDE The ICMS cable ladder system consists of a wide range of aluminum and Steel cable ladders, Fittings and accessories. Ladder Trays are available in two models: Tubular rungs mechanically
More informationSwifts SW strength, speed and flexibility
Swifts SW strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE Global vision... 21st Century solutions Established in the UK since 1972, Legrand is a world leading manufacturer of products
More informationTable of Contents. Type: UL/TG/ST 4. Type: UL/TU/ST 13. Type: UL/TT/ST or UL/TC/ST 22. Type: UL/TR/ST 34. Type: UL/LZ/ST 53.
Table of Contents Table of Contents ULI TM Steel Surface Cable Trunking Type: UL/TG/ST 4 ULI TM Steel Perforated Cable Tray Type: UL/TU/ST 13 Type: UL/TT/ST or UL/TC/ST 22 Type: UL/TR/ST 34 ULI TM Steel
More informationFM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
More informationCable Tray and Accessories
Vergokan Cable Tray Cable Tray and Accessories 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz Vergokan Cable Tray 2 Vergokan Cable Tray KBSI 35 Series
More informationFM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
More informationMarine cable ladders. Marine cable ladders
386 This chapter contains an overview of the RICO marine for various loads and applications subdivided in product families. Content Table of content Page 40 mm side height 390 387 System overview cable
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts
More informationEXTRUDED HEAT SINKS FOR POWER SEMICONDUCTORS
EXTRUDED HEAT SINS FOR POWER S 621 AND 623 Low-Profile for All Metal-Case Power Semiconductors Footprint Thermal Performance at Typical Load Standard Dimensions Height Mounting Natural Forced Weight P/N
More information300 SERIES STANDARD DUTY CURVED TRACK
300 SERIES STANDARD DUTY CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301A 301W 316A 316W 328A 328W 300B SERIES BLACK CURVED TRACK COMPLETE TRACK MODEL NUMBERS 301AB 301WB 316AB 316WB 328AB 328WB SINGLE CARRIER
More informationPRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM
PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com
More informationGuide-Rails: Vertical
For vertical application For fixing onto existing ladders or climbing irons. Comes with joint plate. Mounting brackets extra to order. Maximum mounting distance: 1680 mm. Installation of bracket to rail
More informationCable Tray Straight Sections Pages Fittings Pages Inside Vertical Bends. 90 Page Page Page Page 1-15
Premier Ladder Tray When metal ladder cable trays came of age, they were used to support the new armored shielded power cables that were permitted outside the conduit environment. Utilities and industrial
More informationISO 9001:2008
DOOR Dutch, Standard Duty, Individual Dog Model Features 1 FREEMAN MARINE Dutch doors perform like a single panel door when regular access is needed, yet the top half can be operated separately from the
More informationSeries 500. Liquid Level Transmitters. Instruction Manual
Series 500 Liquid Level Transmitters Instruction Manual Contents Section Content Page 1 Introduction 1.1 General Overview 3 1.2 Mounting Options 3 2 Installation Notes 2.1 Transmitters 4 2.1.1 Model 510
More informationHDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
More informationAll fitting are offered at 300mm Radius as standard and others Radius available on request.
Heavy Duty Profile Standard s:,,,,,,,, 0-. Other widths are also available on request. EMI Ladder is designed to give a maximum Cable Loading Capacity whilst retaining high strength. By utilizing high
More informationCL Series Cable Ladders and Accessories EIA/TIA Compliant
96-986 / rev 8a / 09-20-10 CL Series Cable Ladders and ccessories EI/TI Compliant EXCEPTIONL SUPPORT & PROTECTION The CL Series fully welded heavy-duty cable ladders and accessories Features Ladder sections
More informationGuide-Rails: Vertical
For vertical application For fixing onto existing ladders or climbing irons. Comes with joint plate. Mounting brackets extra to order. Maximum mounting distance: 1680 mm. Installation of bracket to rail
More informationComponents & Methods of Attachment Series 99 Fixed & Moving Rail Tracks
Components & Methods of Attachment Series 99 Fixed & Moving Rail Tracks 9946 9943 9956 Internal Joining Fixed Track 9952 Ceiling Cover 78mm Diameter 9950 Swivel Hanger Attachment 9951P Two Screw Attachment
More informationI-BEAM LADDER TRAY SYSTEM
I-BEAM LADDER TRAY SYSTEM 20 OCEAN-1 MARINE PRODUCTS, LTD. MARINE & OFFSHORE CABLE TRAY SYSTEMS Section Page Marine Channel 2 Flatbar Ladder Tray 35 C-Rail Leg-In Ladder Tray 46 I-Beam Ladder Tray 67 Important
More informationMarine 01. Polished and Bright Dipped. Lite Brushed and Bright Dipped
High Quality Marine Pipe 6463 Marine Pipe comes Boxed and Poly-Sleeved Suggested Applications: T-Tops, Tuna Towers, Half Towers, Marlin Towers, Leaning Posts, Bow Rails, Poling Platforms, etc. Western
More informationDesign and Manufacture Data Booklet. National 5, Higher and Advanced Higher
Design and Manufacture Data Booklet National 5, Higher and Advanced Higher This edition: November 2018, version 1.0 Published by the Scottish Qualifications Authority The Optima Building, 58 Robertson
More informationLadders. Werner Ladders / Series Round Rung Extension & Single Ladder
Werner 7100-2/7100-1 Series Round Rung Extension & Single Ladder 7116-2* 16 -- 13 7120-2 20 -- 17 7124-2 24 -- 21 7128-2 28 -- 25 7108-1 -- 8 -- 7110-1 -- 10 -- 7112-1 -- 12 -- 7114-1 -- 14 -- 7116-1 --
More informationAccessories, Splices and Connectors
10.137 Accessories, Splices and Connectors Splices and Connectors Pgs. 137-142 Misc. Accessories Pgs. 143 Ground Connectors Pg. 144 Separators Pgs 145 For more information or to order, call 1-800-277-4810
More informationCable Tray and Accessories
Vergokan Cable Tray Cable Tray and Accessories 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz Vergokan Cable Tray 2 Vergokan Cable Tray KBSI 35 Series
More informationSpecialties Inc. DISCLAIMER TABLE OF CONTENTS
TABLE OF CONTENTS Curtain Track Selection Guide...2 Ordering COMPLETE Tracks...3 Recommended Track Hanger Spacing...4 100 Series Standard-Duty Straight Track...6 200 Series Black Medium-Duty Straight Track...10
More informationB-LINE SERIES SGPC-16. Safety gratings. Safety gratings. Safety for every walk of life
Safety gratings SGPC-16 B-LINE SERIES Safety gratings Safety for every walk of life Product Applications Grip Strut Eaton s B-Line series safety grating offering is ideal for a wide variety of applications.
More informationCTCC-10. Cable Cleats Protect Your Investments
CTCC-10 Cable Cleats Protect Your Investments Introduction Protect your People Protect your Cables Protect your Systems Cooper B-Line Cable Cleats are designed to support and retain your cables within
More informationABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 7 K-Strut Support Systems A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 7: K-Strut Support Systems K-1000
More informationCable Tray Ladder, Trough, Channel, Under Floor, Shielded CH-117O
Cable Tray, Trough, Channel, Under Floor, Shielded C-117O Style Cable Tray Typical Installations Chalfant Cable Trays Tray When metal ladder cable trays came of age, they were used to support the new armored
More informationCable ladder systems. 319 Fittings, side rail height 110 mm 320 Accessories for side rail height 45, 60, 110 mm. Hold-down clamps
Side rail height 45 Light-duty rung, cable ladder length 3.0 m, Rail thickness.25 Light-duty rung, cable ladder length 6.0 m, Rail thickness.25 Light-duty rung, cable ladder length 3.0 m, 306 308 Rail
More informationWIRE BASKET TRAY CANADIAN ELECTRICAL RACEWAYS INC.
CANADIAN ELECTRICAL RACEWAYS INC. WIRE BASKET TRAY Made of heavy-gauge zinc plated wire mesh, CER basket tray is ideal for your commercial or industrial cable management project. A full range of cable
More informationHusky Way. In Aluminum, Mill-Galvanized Steel, Galvannealed Steel, 304 and 316 Stainless Steel
2.88 Husky Way In Aluminum, Mill-Galvanized Steel, Galvannealed Steel, 304 and 316 Stainless Steel Description of Husky Way... Pg. 89 Selection Tables... Pg. 90 Numbering System... Pg. 91 ing Tables...Pgs.
More informationBILMAT ENGINEERING (An ISO 9001:2008 certified company)
BILMAT ENGINEERING (An ISO 9001:2008 certified company) ADDRESS 352,353 G.I.D.C, INDUSTRIAL ESTATE, POR, RAMANGAMDI, VADODARA -391 243, GUJARAT. PROPRIETOR DIPAK L PATEL PHONE NO 0265 6540425 E-MAIL dipak@bilmatengg.com
More informationHSpecialties Inc. TABLE OF CONTENTS
TABLE OF CONTENTS Introduction... Curtain Track Selection Guide...2 Ordering COMPLETE Tracks...3 00 Series Standard-Duty Straight Track...4 200 Series Black Medium-Duty Straight Track...8 300 Series Standard-Duty
More informationTG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
More informationHusky Ladder Flange Out
CABLE TRAY Husky Ladder Flange Out In Aluminum, teel election Tables Pg. 29 Numbering ystem Pg. 30 Loading Tables Pgs. 31-35 The upper flange may have an extruded lip, a bent lip, or no lip at all depending
More informationCABLE TRAY SURFACE RACEWAY J-HOOKS IN-FLOOR SYSTEMS POWER POLES DESK PEDESTALS CHANNEL TRAY
LE TY SUFE EWY J-HOOKS IN-FLOO SYSTEMS POWE POLES DESK PEDESTLS HNNEL TY hannel Tray from MonoSystems MTEIL LENGTH ft. m () HNNEL () HNNEL () HNNEL For 5-years MonoSystems has been creating innovative
More informationBC 09. Pressure Relief Dampers PRD-GAB-12B LISTED
BC 09 Pressure Relief Dampers PRD-GAB-12B Table Of Contents S. No Description Page No 1 General Information 1 2 PRD/NRD- B10 Series 2 3 CBD - B20 Series 3 4 BDD - B30 Series 4 5 Engineering and Performance
More informationALUMINUM DISTRIBUTING, INC S.W. 2nd Ave. Ft. Lauderdale, FL Table of Contents
Table of Contents Page 2.........Equal & Unequal Angle Structural & Architectural Page 3.......................Flat Bar Structural Page 4.....................Flat Bar Architectural Page 5..... U Channel,
More informationWelded cable ladder system
Title page Welded cable ladder system 04 KTS roschüre_geschweißtes Kabelleiter System / en / 0/05/207 (LLExport_0927) / 0/05/207 System information OO - Pure cable ladder competence Electricians have placed
More informationTHE FASTEST CABLE TRAY SYSTEM
E FASES CABLE RAY SYSEM A FULL RANGE OF PERFORAED CABLE RAY PRODUCS MANUFACURED O E IGES SANDARDS, OFFERING IME SAVING AND ADAPABLE DESIGNS, PRACICAL SLO PAERNS AND VERSAILE ACCESSORIES. Bespoke Steel
More informationaccqpulse Velocity Profiler Sensor Installation Guide
accqpulse Velocity Profiler Sensor Installation Guide Instruction Sheet #69-7403-012 Released May 2016 Overview This instruction guide is for the installation of the accqpulse shallow water and deep water
More informationSTEP STOOLS, STANDS & LADDERS
STEP STOOLS, STANDS & LADDERS STEP STOOLS KIK-STEP Extra heavy-duty steel Comes with a double platform with non-slip rubber tread Spring-loaded casters retract under slight pressure, forcing base to the
More informationTABLE OF CONTENTS. Safety Grating ALABAMA METAL INDUSTRIES CORPORATION
TABLE OF CONTENTS Safety Grating Page Diamond-Grip Channel... 1-6 Diamond-GripWalkway... 7-8 Safety-Grip Channel... 9-12 Safety-Grip Walkway...13-14 Safety-Tread Channel...15-16 Safety-Tread Flooring...17-18
More informationWHEN LIVES ARE IN THE BALANCE AND SECONDS COUNT
100' Aerial Ladders WHEN LIVES ARE IN THE BALANCE AND SECONDS COUNT HP 100 Aerial The E-ONE HP 100 is able to arrive first on the scene with everything necessary for fast action when the extra reach of
More informationPRODUCT CATALOGUE MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CATALOGUE REGISTERED COMPANY MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY Who we are Founded in 2005 by Directors Hayden Froggatt and
More informationEin Unternehmen der SCHAUENBURG International Gruppe Fire sleeve - F 88 SC Technical data Product details
Fire sleeve - F 88 SC The extruded fire sleeve with silicone coating, high resistance and material density. Available in the standard colour red, but also in other colour coding. Backing material Coating
More information40 Side Height. Perforated Cable Trays - SPK Series. Standart Perfore Kablo Kanalı. Thickness (T) (mm) "Order Code (PG)" "Order Code (HDG)"
Perforated Cable Trays - SPK Series Standart Perfore Kablo Kanalı pregalvanised steel hot dip galvanised finish Thickness (T) Thickness (T) SPK 5 0,82 0 0 08 1 1,02 0 0 10 2 SPK 410 1,13 0 08 1 1,41 0
More information25 Side Height. Perforated Cable Trays - SPK Series. Standart Perfore Kablo Kanalı. Thickness (T) (mm) "Order Code (PG)" "Order Code (HDG)"
Perforated Cable Trays - SPK Series Standart Perfore Kablo Kanalı pregalvanised steel hot dip galvanised finish Thickness (T) Thickness (T) SPK 205 0,63 0 0 08 1 0,79 0 0 10 2 SPK 210 0,94 0 08 1 1,18
More informationSafety Ladders: Hot Dip Galvanized/Stainless Steel
Y-Spar Guide-rail profile: 50 x 32 mm. Comes with joint plate. Mounting brackets extra to order. Recommended mounting distance 1400 mm - max. 1680 mm. Installation of bracket to ladder is carried out through
More informationRubbish Chutes Operating & Assembly Instructions
Rubbish Chutes Operating & Assembly Instructions Conveying and Hoisting Solutions Pty Ltd ABN: 78 163 105 744 1. Purpose of Equipment Rubbish Chute systems are intended for the guidance of falling material
More informationMeridian TM EC and DRC Series. Pneumatic Actuators
Meridian TM EC and DRC Series Pneumatic Actuators The Meridian TM Pneumatic Actuator DRC Series Features & Benefits: The Meridian TM Pneumatic Actuator has proven to be the most reliable actuator by providing
More informationC-RAIL LADDER TRAY SYSTEM
C-RAIL LADDER TRAY SYSTEM 20 OCEAN-1 MARINE PRODUCTS, LTD. MARINE & OFFSHORE CABLE TRAY SYSTEMS Section Page Marine Channel 2 Flatbar Ladder Tray 35 C-Rail Leg-In Ladder Tray 46 I-Beam Ladder Tray 67 Important
More informationCable & Pipe Supports
LOOK FOR OUR AS3013:2005 FIRE RATED LOGO. It s a sure sign your cable management solution is designed in Australia, rigorously and independently tested to meet Australian standards, and selected from Australia
More informationSeries HCD Airfoil Control Damper
Series HCD Airfoil Control Damper Model: HCD-1 The Holyoake HCD-1 is a precisely made volume and pressure control device with extremely low leakage when closed, (in the range of 0.003m 3 /s at 100 Pa).
More information