Product Support Guide Roll Formed Beams 2013
|
|
|
- Aubrie Gallagher
- 6 years ago
- Views:
Transcription
1 Beam Capacity Chart: 27E 45E, /2 3 21/ /2 27E, 27ER 36E, 36ER 40E, 40ER 45E, 45ER UNSLOTTED & SLOTTED STEP BEaM CaPaCITIES (LBS PER PaIR)* Span 27E, 27ER Deflection 36E, 36ER Deflection 40E, 40ER Deflection 45E, 45ER Deflection 36 7, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Capacities are per the 2008 RMI and 2001 AISI specifi cations. Values shown refl ect the capacity of the beams based on the lesser of its strength in bending, or L/180 defl ection criteria. 7 This document is the property of Interlake Mecalux, S.A, its total, or partial, reproduction is prohibited by law; as is handing it over to third-parties.
2 Beam Capacity Chart: 27E 45E, /2 3 21/ /2 27E, 27ER 36E, 36ER 40E, 40ER 45E, 45ER Span 27E, 27ER Deflection 36E, 36ER Deflection 40E, 40ER Deflection 45E, 45ER Deflection 92 2, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Roll Formed Beams This document is the property of Interlake Mecalux, its total, or partial, reproduction is prohibited by law; as is handing it over to third-parties.
3 Beam Capacity Chart: 50E 65Q, Span Deflection Deflection Deflection Deflection 36 18, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , This document is the property of Interlake Mecalux, S.A, its total, or partial, reproduction is prohibited by law; as is handing it over to third-parties.
4 Beam Capacity Chart: 50E 65Q, Span Deflection Deflection Deflection Deflection 72 9, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Roll Formed Beams This document is the property of Interlake Mecalux, its total, or partial, reproduction is prohibited by law; as is handing it over to third-parties.
5 Beam Capacity Chart: 50E 65Q, Span Deflection Deflection Deflection Deflection 108 6, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , This document is the property of Interlake Mecalux, S.A, its total, or partial, reproduction is prohibited by law; as is handing it over to third-parties.
6 Beam Capacity Chart: 50E 65Q, Span Deflection Deflection Deflection Deflection 144 3, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Roll Formed Beams This document is the property of Interlake Mecalux, its total, or partial, reproduction is prohibited by law; as is handing it over to third-parties.
Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray
www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing
LINTELS WITH TG. Single Spans. Lintels Supporting Truncated Girder Truss INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2
63 Single Spans INCLUDES TG Set Back 2.4m Maximum 40 kg/m 2 90 kg/m 2 TG Set Back 3.6m Maximum 40 kg/m 2 90 kg/m 2 Restraint value for slenderness calculations is 600 mm. K6 factor of 1.0 used. K23 factor
CMT ELECTRO-HYDRAULIC SYNCHRONIZED CNC PRESSBRAKE PBH SERIES
PBH SERIES PBH Series Electro-hydraulic Synchronized CNC Pressbrake Streamlined design, high speed, high precision, high rigidity CNC sheet metal pressbrake Electro hydraulic servo system, full loop controlling
DeltaStud - Lightweight Steel Framing
DeltaStud - Lightweight Steel Framing B C H A t P Load Tables for Wind Bearing and Combined Wind & Axial Load Bearing Condition January 2014 Table of Contents Commentary Introduction...3 Product Identification...3
DieMax XL TM Maximum Life Springs
www.danly.com DieMax XL TM Maximum Life Springs Meets ISO Standards www.danly.com DieMax XL TM Maximum Life Springs SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON DANLY IEM is a leading manufacturer
series 90-GV Variable geometry units
series 90-GV Variable geometry units www.koolair.com 1 S-90-GV Variable geometry unit CONTENTS Description and coding 2 Operation 3 Dimensions 4 Technical data 4 2 S-90-GV Variable geometry unit Description
"...Let things run smoother - HELM technologie"
Group 14 a -aluminium- ALUMINIUM LIGHT CRANE SYSTEM "...Let things run smoother - HELM technologie" - Individual solution for every workplace - Extreme load-bearing capacity - Extensive accessories upon
10. Predesign charts of castellated beams
. Predesign charts of castellated beams rcelorittal has developed predesign charts to enable engineers to quickly determine initial section sizes and web opening layouts based on the loading conditions
ER2 Twin Hook Electric Chain Hoist
OM-ER2TWZ-CEE-00 Original Instruction ER2 Twin Hook Electric Chain Hoist (250kg to 5t) Operation Manual (TWER2/TWER2M/TWER2SP/TWER2SG) Introduction KITO Twin Hook Electric Chain Hoist is intended to make
JIS SPRINGS SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON
JIS SPRINGS SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON ANCHOR DANLY is a leading manufacturer of die and die component products supplied globally to the parts forming industry. Backed by years of
VAV RETROFIT/BYPASS TERMINAL UNITS TABLE OF CONTENTS RETROFIT/BYPASS TERMINAL UNITS. E-2 Excellence in Air Distribution MODEL RVE MODEL KLB MODEL SVE
TALE OF CONTENTS RETROFIT/YPASS TERMINAL UNITS RVE This retrofi t terminal unit is designed to convert high pressure mechanical constant volume systems to low pressure variable volume systems and also
Series 2, 3, 4, & 5 Aluminum - Straight Sections
- Straight Sections I-1 B-Line series Cable Tray Systems - Accessories For Aluminum Fittings see fittings section pages L-1 thru L-17 How The Service Advisor Works We know that your time is important!
RAFTERS. Single and Continuous Spans
7 Single and Continuous Spans Restraint value for slenderness calculations is 1200 mm, in 10, 20, 40( kg/m 2 ) (Restraint may be by Roof Battens) Restraint value for slenderness calculations is 600 mm,
4.5 COMPOSITE STEEL AND CONCRETE
4.5 COMPOSITE STEEL AND CONCRETE 4.5.1 RULES OF THUMB 4.5 Composite Steel and Concrete (1/11) Typical starting point Overall concrete depth 130mm (Grade 30) Depth of profiled decking 60mm Size beam with
series KLR Linear slot diffusers
series Linear slot diffusers www.koolair.com 1 CONTENTS Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Product codes 5 2 Linear slot diffuser Description linear supply diffuser
Table of Contents. PrimeJoist
JamStud Introduction Table of Contents PrimeJoist Introduc on...1 Fire & Sound Tested Assemblies...2 PrimeJoist Design Considera ons...3-4 PrimeJoist Product Profile...5 PrimeJoist Sec on Proper es...6
HORIZONTAL SPLIT-CASE PUMPS INSTALLATION, OPERATION AND MAINTENANCE MANUAL
MODEL 2800 HORIZONTAL SPLIT-CASE PUMPS INSTALLATION, OPERATION AND MAINTENANCE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible
C Series Open Mode Design
C Series Open Mode Design Type: C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: October 2010 TDK MLCC US Catalog Version A10 REMINDERS Please
Light Duty Push-Pull and Turn-to-Lock Controls
ight Duty Push-Pull and Turn-to-ock Controls Push-Pull Controls Creative solutions for every application Outdoor Power Equipment Construction Equipment Utility Vehicles ZTR s Recreational Equipment Tillers
Series 900H Hydraulic Crane 27 Ton Load Ratings
Series 0H Hydraulic Crane 27 Ton Load Ratings DNGER N UNTRINED OPERTOR SUBJECTS HIMSELF ND OTHERS TO DETH OR SERIOUS INJURY YOU MUST NOT OPERTE THIS CRNE UNLESS You have been trained in the safe operation
C Series Soft Termination Type
C Series Soft Termination Type Type: C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
GRIP STRUT STAIR TREADS
Safe Loading Stair Treads P&R METALS CALL TOLL-FREE: 1-877-880-3319 GRIP STRUT STAIR TREADS Load data below takes eccentric loads into consideration. Although load values include allowances for normal
Supreme. Supreme Framing System. Product Catalog IAPMO UNIFORM ER #0313
Supreme Supreme Framing System Product Catalog IAPMO UNIFORM ER #0313 2507 Table of Contents Certification of Materials 5 LEED Credits 5 Independent Product Certification 5 Code Approvals, Performance
SUPPORTS, CANOPY W/CABLE ASSEMBLY INSTRUCTIONS KIT P/N
SUPPORTS, CANOPY W/CABLE ASSEMBLY INSTRUCTIONS KIT P/N 512-00010-00 CANOPY SUPPORTS INSTALLATION AND ADJUSTMENT Tools required: 1-7/8 open end wrench 1-3/4 open or box end wrench (or a rachet and 3/4 socket)
Traction Tread Grating - Design Load Table of Contents & Advantages
- Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57
MULTILAYER CERAMIC CHIP CAPACITORS
April 2018 Commercial grade, Soft termination (Low resistance type) CNC series CNC5 CNC6 3216 [1206 inch] 3225 [1210 inch] * Dimensions code: JIS[EIA] (2/6) REMINDERS FOR USING THESE PRODUCTS Before using
Series 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
Overview. HDS replaces built-up curtain wall headers. HDS replaces load-bearing box beam headers
Overview The Heavy-Duty Stud (HDS ) Framing System is a high-performance, costeffective, multipurpose, heavy-duty framing stud for headers, jambs, posts and built-up tube truss chords and webs. The superior
betec Licht AG Mirror lights
betec Licht AG Mirror lights Make-up 1-3 01 Special feature These mirror lights surround your image with light. You may shine the rotating lamp directly on you or on the mirror to enjoy its indirect,
CABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts
MPC-B2800 User manual Maxell Rechargeable Power Bank MPC-B2800
MPC-B2800 User manual Maxell Rechargeable Power Bank MPC-B2800 Accessories: Charger unit x 1 Charging cable (~30cm) x 1 Instruction booklet with warranty sheet x 1 -This instruction manual is not allowed
BRE/TSLAB Vulcan Comparisons. Roger Plank Anthony Abu & Ian Burgess
BRE/TSLAB Vulcan Comparisons Roger Plank Anthony Abu & Ian Burgess Tensile Membrane Action Tensile Area Peripheral compression BRE Bailey Method Rigid plastic theory with large change of geometry Yield
MULTILAYER CERAMIC CHIP CAPACITORS
April 2018 Automotive grade, Soft termination (Low resistance type) CNA series CNA5 CNA6 3216 [1206 inch] 3225 [1210 inch] * Dimensions code: JIS[EIA] (2/6) REMINDERS FOR USING THESE PRODUCTS Before using
RACE X INTERCOOLER INSTALLATION INSTRUCTIONS
RACE X INTERCOOLER INSTALLATION INSTRUCTIONS The goal of AMS Performance is to provide the highest quality, best performing products available. By utilizing research and development, and rigorous testing
C Series Commercial Grade Open Mode
C Series Commercial Grade Open Mode Type: C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4532 [EIA CC1812] C5750 [EIA CC2220] Issue date: Oct 2013 REMINDERS Please read before using this product
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
Eurocode Compliant. supplement. groundworks technical reference section 4: double acting hydraulic braces. supershaft plus technical details
groundworks technical reference section 4 : double acting hydraulic braces supplement supershaft plus technical details Page 1 Eurocode Compliant Issue 1 supershaft plus (SSP) 1. Introduction Supershaft
ASSEMBLY MANUAL. 45-Foot Air Double Disc Drill. Amity Technology, LLC th Avenue North Fargo, ND (701)
ASSEMBLY MANUAL 45-Foot Air Double Disc Drill Amity Technology, LLC 2800 7th Avenue North Fargo, ND 58102 (701) 232-4199 www.amitytech.com TABLE OF CONTENTS Main Frame 1 Wing Lock Towers 3 Wing Frames
TEST REPORT. Ceram Reference: (QT21489/2/SL)/Ref: 1.0A. Tensile and Frictional Tests on the Fast Fit BeamClamp Systems.
TEST REPORT Ceram Reference: 121557 (QT21489/2/SL)/Ref: 1.0A Project Title: Tensile and Frictional Tests on the Fast Fit BeamClamp Systems Client: Kee Safety Limited For The Attention of: Mr Phil Higgs
LIGHT TELESCOPIC RAIL
LIGHT TELESCOPIC RAIL Svanemærket tryksag 541-713 INDEX Index Selecting Guide... 4 5030 Steel... 5 5040 100 % Ext. Steel... 6 5040 140 % Ext. Steel... 7 210 Aluminium... 8 220/230 Aluminium... 9 410 Aluminium...
Maeda MC285CRM(E) Technical specifi cations
Maeda MC285CRM(E) Technical specifi cations Offering the best balance of power and design Slim (750mm) Wide Body Programmable Moment Limiter Rubber Tracks Hydrostatic Transmission Tilt Sensor/Alarm Track
1-3/8" inside-to-inside dimension. length of the leg. S162
Member Designation MEMBER DEPTH: FLANGE WIDTH: STIFFENER LIP: Member Depths are taken in 1/100 inches. Flange Widths are taken in 1/100 inches. Member Flange Width Stiffener Lip (in) For Track Sections,
Safety detection solutions
General, Preventa XY C Presentation are designed to: b avert hazards (dangerous phenomena) at the earliest possible moment, or to reduce risks which could cause injury to persons or damage either to machines
LM SERIES LINEAR MODULE
LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.
PH: (925)
SBC BEAM CLAMPS PH: (925) 788-1301 www.seismicbracing.com SERIES BEAM CLAMPS IBC, ASCE, ANSI/MSS SP-58, ANSI/FM 1950-2016, FM 1950-10, FM 1950-13, CBC / OSHPD AND NFPA-13 CODE AND STANDARD COMPLIANT The
Series 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
Maximum Span Tables. for Joists and Rafters. MSR Lumber. for Performance. Figure provided courtesy of the American Forest & Paper Association
Maximum Span Tables for Joists and Rafters MSR Lumber for Performance Figure provided courtesy of the American Forest & Paper Association 2 MSRLumber Producers Council Span Tables Purpose and Introduction
I N D U S T R I E S, I N C. MARINE I-BEAMS LADDER SYSTEMS
CHANNEL-TRACK & TUBE-WAY MARINE I-BEAMS LADDER SYSTEMS I-Beam Siderail Ladder Cable Tray End View 1.5".595" 4.188".344" 1.039" 1.5" 4 Siderail Example Rung Detail.85" Features: 1. Siderail is roll formed
MULTILAYER CERAMIC CHIP CAPACITORS
June 2016 CGA Series Automotive Grade Soft Termination Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] CGA7 [EIA CC1808] CGA8 [EIA CC1812] CGA9 [EIA CC2220]
DEALER INTERNAL USE ONLY. Undercarriage 330/336 GENERAL DUTY UNDERCARRIAGE INTRODUCTION
August MONTH 2014 2009 DEALER INTERNAL USE ONLY Undercarriage 330/336 GENERAL DUTY UNDERCARRIAGE INTRODUCTION Caterpillar introduces Cat General Duty Undercarriage for 330/336 Hydraulic Excavators. Caterpillar
PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge
PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge Ex GST Inc GST $40,950.00 $45,045.00 ORDER CODE: S909 MODEL: Control Unit (Type): PB-170B Estun
Premium Structural Engineered Wood Products. Technical Data for. LVL Flange and MSR Flange I-Joists
Premium Structural Engineered Wood Products Premium Structural Engineered Wood Products I- USER S guide Technical Data for LVL Flange and MSR Flange I-s THE structural Wood Supplier Wood A renewable building
TAS. Fire Design Example Based on European Standard ENV (Eurocode 9) TALAT Lecture pages. Advanced Level
TALAT Lecture 2713 Fire Design Example Based on European Standard ENV 1999-2 (Eurocode 9) 27 pages Advanced Level Updated from the TAS Project : TAS Leonardo da Vinci program Training in Aluminium Alloy
C Series Commercial Grade Soft Termination
C Series Commercial Grade Soft Termination Type: C1608 [EIA CC0603] C2012 [EIA CC0805] C3216 [EIA CC1206] C3225 [EIA CC1210] C4520 [EIA CC1808] C4532 [EIA CC1812] C5750 [EIA CC2220] C7563 [EIA CC3025]
MOLDED FIBERGLASS GRATING
MOLDED FIBERGLASS GRATING Molded Fiberglass Grating What is DURAGRATE? DURAGRATE molded fiberglass grating is a strong mesh grating panel that is the chemical resistant flooring choice for many industrial
Regular and High Capacity ICE BREAKER Hopper Spreader Installation Instructions
Lit. No. 96211, Rev. 00 June 15, 2008 Regular and High Capacity ICE BREAKER Hopper Spreader Installation Instructions Read this manual and engine owner's manual before installing or operating the spreader.
Allowable Holes in VERSA-LAM Beams
VERSA-LAM Products 23 An Introduction to VERSA-LAM Products When you specify VERSA-LAM laminated veneer headers/beams, you are building quality into your design. They are excel lent as floor and roof framing
The FRACOF Composite Slab Test
The FRACOF Composite Slab Test Experiment, Predictions & Results Anthony Abu & Ian Burgess Fire Resistance Assessment of partially protected COmposite Floors - FRACOF Introduction To increase the use of
ROUGH OPENINGS PRODUCT CATALOG STRONGER THAN STEEL. INTERIOR AND EXTERIOR FRAMING
PRODUCT CATALOG STRONGER SM THAN STEEL. INTERIOR AND EXTERIOR FRAMING MADE EASY. Rough openings have always been a challenge on the jobsite. At ClarkDietrich, we make them easy. Our collection of rough
Technical Data Sheet. British Standards Compliant. TECHNICAL DATA SHEET System 160 (British Standards)
Technical Data Sheet British Standards Compliant Mass 10 System 160 Mass 25 Mass 50 MAT 75 / 125 Superprop Hydraulics Quickbridge MU Falsework MU Bridging Compact Bridging BarrierGuard 800 Instrumentation
Telescopic Line. General catalogue English.
Telescopic Line General catalogue English www.rollon.com When you move. We move Rollon S.p.. was set up in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the
EZ-Haul Utility Wagon w/ Trailer Hitch
103446 EZ-Haul Utility Wagon w/ Trailer Hitch 10712 2011 FarmTek All Rights Reserved. Reproduction is prohibited without permission. Revision date: 06.211 STK# Description 103446 Utility Wagon 1 CARE AND
Cable Ladders with Troughs and Partitions
Cable Ladders with Troughs and Partitions Follow these instructions to install Cable Ladders on NetShelter VX Enclosures that have APC Shielding Trough and Shielding Partitions installed. Use Cable Ladders
Gantry Cranes. The Caldwell Group Model K90 - Adjustable Height & Span Gantry H Master Catalog
Model K0 - Adjustable Height & Span Gantry OVERALL LENGTH (B) NOMINAL SPAN HOIST/TROLLEY HEADROOM SEE PAGES H.36 - H.3 INSIDE SPAN (A) PRODUCT FEATURES: Adjustable span standard on - spans through 5 ton.
Induction terminal units
series IHK Series IHK 1 Induction terminal units IHK IHK-F IHK-V CONTENTS age eneral Features 2 Dimensions and Configurations 4 Induction terminal unit IHK-F 5 Induction terminal unit IHK-V 6 Installation
Pipe Strut vs. Laced Strut
Pipe Strut vs. Laced Strut Chiew Sing-Ping School of Civil and Environmental Engineering NANYANG TECHNOLOGICAL UNIVERSITY 9 July 2015 Pipe Strut vs. Laced Strut Pipe Strut Laced Strut 2 PLAXIS Soil-Structure
RH TROLLEY TROLLEY SIZE MAXIMUM FLANGE THICKNESS (INCHES)
HOISTS AND CRANES RH TROLLEY BEAM FLANGE CLEARANCE EDOC0189 JUNE 29, 2004 Purpose This document provides a listing of the maximum flange thickness of the RH trolleys. Included is a chart listing the trolley
Ball Slide Assemblies
NMS SERIES Ball Slide Assemblies Non-Magnetic Ball Slides Inch Version Non-Magnetic Linear Slides 6 Reasons to choose Del-Tron Non-Magnetic Ball Slides Del-Tron Ball Slides Load Ratings and Life Estimates
Product Catalogue. Cable Management Solutions
Product Catalogue Cable Management Solutions Cable management solutions Introduction Cable ladder & accessories Perforated tray & accessories Trunking & accessories Channel tray & accessories Superstrut
S P E C I F I C A T I O N S SPEC. No. CT-2190 DATE-SEP. 2007
S P E C I F I C A T I O N S SPEC. No. DATE-SEP. 2007 SPECIFICATlONS HYDRAULIC CRANE MODEL:UNIC URV554 (FOR INDONESIA) Specifications subject to change without notice. UNIC CRANE PERFORMANCE MODEL : URV554
CKG Series Commercial Grade MEGACAP Type
CKG Series Commercial Grade MEGACAP Type Type: CKG32K [EIA CC1210] CKG45K [EIA CC1812] CKG45N [EIA CC1812] CKG57K [EIA CC2220] CKG57N [EIA CC2220] Issue date: April 2013 REMINDERS Please read before using
WESTERN SPECIFIER. Technical Data for PWI Joists, PWLVL Headers, Beams, Rim Board, Stud, and Dimension
E N G I N E E R E D W O O D WESTERN SPECIFIER Technical Data for PWI Joists, PWLVL Headers, Beams, Rim Board, Stud, and Dimension P R O D U C T S JOIST DIMENSIONS 9½ LVL FLANGE PWI JOIST SERIES JOIST DIMENSIONS
CHAPTER 5 PREVENTION OF TOOTH DAMAGE IN HELICAL GEAR BY PROFILE MODIFICATION
90 CHAPTER 5 PREVENTION OF TOOTH DAMAGE IN HELICAL GEAR BY PROFILE MODIFICATION 5.1 INTRODUCTION In any gear drive the absolute and the relative transmission error variations normally increases with an
Installation and Maintenance Manual Duplex Pressure Powered Pump Package Unit with Insulation Jacket and Condensate Recovery Meter PPPPU-D
Installation and Maintenance Manual Duplex Pressure Powered Pump Package Unit with Insulation Jacket and Condensate Recovery Meter PPPPU-D Energy Conservation Environment Process Efficiency www.forbesmarshall.com
Design principles and Assumptions
Design principles and Assumptions The design and use of concrete slabs that utilise ARMOURDECK 300 in composite construction may be carried out using either: the relevant Australian and international Standards
Assembly & Installa on Guide RB031-3: TRIPLE CROSSBAR KIT
PLEASE READ INSTRUCTIONS FULLY PRIOR TO INSTALLATION OF CROSSBAR KIT This instruction is to illustrate the recommended installation method for our Crossbar Kit, any deviation from this will be the sole
MULTILAYER CERAMIC CHIP CAPACITORS
August 2017 Automotive Grade, Soft Termination CGA series CGA2 CGA3 CGA4 CGA5 CGA6 CGA7 CGA8 CGA9 CGAD 1005 [0402 inch] 1608 [0603 inch] 2012 [0805 inch] 3216 [1206 inch] 3225 [1210 inch] 4520 [1808 inch]
SAFE-T-SPAN LOAD/DEFLECTION INFORMATION
SAFE-T-SPAN LOAD/DEFLECTION INFORMATION Fibergrate Composite Structures Inc. has revised its load/deflection tables to be even more user friendly by separating the uniform load information from the concentrated
01 CONTENTS. e-beam. e-beam. Technical Information 03
B 1 01 CONTENTS 02 e-beam Technical Information 03 11 e-beam Strutting Beams 12 Strutting Counter Beams 14 Strutting Hanging Beams 16 Counter Beams 18 Roof Beams 20 ENGINEERED TO LOAD ENGINEERED TO LENGTH
Series 1300 Hydraulic Crane 30 Ton Load Ratings
Series 13 Hydraulic Crane Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
Sec Noise disturbances prohibited. (a) General provisions. (1)
Se 38-441. - Noise disturbances prohibite (a) General provisions. It shall be unlawful for any person or entity to knowingly, willfully or recklessly make, permit, cause to be made, or continue any noise
I-BEAM LADDER TRAY SYSTEM
I-BEAM LADDER TRAY SYSTEM 20 OCEAN-1 MARINE PRODUCTS, LTD. MARINE & OFFSHORE CABLE TRAY SYSTEMS Section Page Marine Channel 2 Flatbar Ladder Tray 35 C-Rail Leg-In Ladder Tray 46 I-Beam Ladder Tray 67 Important
Airflow Director for Juniper
Airflow Director for Juniper Switches This manual describes how to install an intake airflow director for Juniper rack-mounted switches. Each kit contains a top intake, side intake with seals, bottom intake,
CL Series Cable Ladders and Accessories EIA/TIA Compliant
96-986 / rev 8a / 09-20-10 CL Series Cable Ladders and ccessories EI/TI Compliant EXCEPTIONL SUPPORT & PROTECTION The CL Series fully welded heavy-duty cable ladders and accessories Features Ladder sections
INME 4011 Term Project Guideline
INME 4011 Term Project Guideline Each team consists of four students (maximum). The projects are described in the attached document. First part of the project includes the calculation of the shaft diameter
Battery Technologies. C-SB_IFP1 Matthias Hess
Battery Technologies C-SB_IFP1 Matthias Hess Battery Technologies Agenda Ni CD / Ni Mh Batteries Li Ion Batteries Chargers Cost comparisions C-SB_IFP1 Matthias Hess Battery Technologies Agenda Ni CD /
Technical sheet PERGOTENDA MILLENIUM
Technical sheet PERGOTENDA MILLENIUM PERGOTENDA MILLENIUM FEATURES MILLeNIuM is a retractable covering system custom made to protect against sun and rain (not suitable to support snow), fixed to a supporting
TELESCOPIC SLIDES 2 beams
12 Partial extension TELESCOPIC SLIDES 2 beams R20 STEEL R26 STEEL TECHNICAL EVOLUTION PLEASE CONTACT US TECHNICAL EVOLUTION PLEASE CONTACT US Example of application EQUIPMENT FOR KITCHEN TROLLEY: Slides
STRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
Fire Block and Pressed Steel Grilles
September 2010 Fire Block and Pressed Steel Grilles Fire Block FB60 Sodium silicate based intumescent material. Provides the lowest activation temperature of any intumescent material at degrees C. It is
CK4400 Series. Standard Duty Cylindrical Knob Locksets
Series Standard Duty Cylindrical Knob Locksets Applications Applications An outstanding combination of value and performance. Ideal for quality residential and light commercial buildings, such as: Fine
C-RAIL LADDER TRAY SYSTEM
C-RAIL LADDER TRAY SYSTEM 20 OCEAN-1 MARINE PRODUCTS, LTD. MARINE & OFFSHORE CABLE TRAY SYSTEMS Section Page Marine Channel 2 Flatbar Ladder Tray 35 C-Rail Leg-In Ladder Tray 46 I-Beam Ladder Tray 67 Important
LTCM-500 Series High Capacity Motorized Tester (550 lbf, 2500N)
LTCM-500 Series High Capacity Motorized Tester (550 lbf, 2500N) Specification Sheet SS-FM-3135-1006 October 2006 The CHATILLON LTCM-500 Series is an economical, motorized tester ideal for production environments,
Series 1400A Hydraulic Crane 33 Ton
Series 1A Hydraulic Crane 33 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
LOUVERED FACE GRILLES AND REGISTERS
Performance Notes for Supply rilles and Registers, 6 and 67 Series Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, the relationship of horizontal spread to throw for three
Series 1400 Hydraulic Crane 33 Ton Load Ratings
Series 1 Hydraulic Crane 33 Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
Installation and maintenance instructions
Before installation these instructions must be fully read and understood Operation General The 9200 Series Automatic Recirculation Control valve is designed to provide protection for low pressure (ASME/ANSI
STRONGER THAN STEEL. interior and exterior framing
ROUGH OPENINGS PRODUCT CATALOG STRONGER SM THAN STEEL. interior and exterior framing rough openings ROUGH OPENINGS M A D E E A S Y. Rough openings have always been a challenge on the jobsite. At ClarkDietrich,
Series 1300A Hydraulic Crane 30 Ton Load Ratings
Series 13A Hydraulic Crane 3 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe