CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate

Transcription

1 CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate wa_vt08914 Available in 45 sizes... from 250x200x150 mm to 1200x1200x250 mm image01-ci The stable CS enclosures series made of solid sheet steel is ideal wherever an effective protection against direct contact with live parts is required. The high degree of protection (IP66) not only provides full protection against most adverse environmental conditions, but also protects the systems and equipment inside the enclosures against their harmful consequences. Tightness is guaranteed through a continuously foamed polyurethane sealing. An all-around rainwater drain profile prevents liquids (such as water or oil) and dirt from penetrating when opening the door. VT12210 Shock resistance rating is IK09 according to EN 62262, hence the inside equipment of the enclosures is also protected against mechanical impacts. CS enclosures can be installed as wall-mounted enclosures. A rough-type paint applied in the powder-coating method provides for nonabrasive corrosion protection. The door of the enclosure is easy to remove in case any further mechanical work needs to be carried out. Concealed inside hinges according quick-change technology are easy to remove for this purpose and provide for quick and easy reversal of the hinging from left to right and vice-versa. 1 EATON CORPORATION xxxxx+xxxx-xxxxen

2 Technical features at a glance Rainwater drain profile Prevents liquids (such as water or oil) and dirt from penetrating when opening the door. Stable design of the enclosures Made of high-grade sheet steel. Protection against mechanical impact. RAL7035 Surface and corrosion protection through a rough-type powder-coating inside and out, RAL Mounting plate Galvanized sheet steel 2-3 mm thick for safe installation of switchgear and basic EMC protection. Flange plate With coextruded seal, ssheet steel for own production. The enclosure can be turned by 180 for cable insertion at the top or bottom. 2 EATON CORPORATION xxxxx+xxxx-xxxxen

3 Wall-mounting brackets For fixing the enclosures on the wall. Mounting in horizontal and vertical direction possible. Foamed sealing Guarantees absolute tightness. IP66 is guaranteed for the entire series. Standardized locking system with twist lock. For use with standardized locks. Door-hinging Optionally left or right-hinged on either 2 or 3 inside hinges. Hinge bolt with quickchange technology For quick and easy removal of the door in case of further work to be carried out EATON CORPORATION xxxxx+xxxx-xxxxen

4 CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate Dimensions [mm] Number Number Number Door-Profiles Height A Width B Depth C of doors of locks of hinges Number VT41014 VT42614 VT P P P P P P P P P 3 2 3P: 3-Point-Locking-System 4 EATON CORPORATION xxxxx+xxxx-xxxxen

5 Flange plates max. Dimensions [mm] Weight [kg] Type Units per Number t1 x t2 [mm] F3A of mounting plate incl. mounting plate Article No. package (pcs.) x x 150 3,4 CS-2520/ x x 150 3,9 CS-32/ x x 250 5,2 CS-33/ x x 250 6,1 CS-33/ x x 350 7,4 CS-34/ x x 250 6,6 CS-43/ x x 250 7,6 CS-43/ x x 350 8,7 CS-44/ x x 350 9,7 CS-44/ x x ,4 CS-46/ x x ,3 CS-46/ x x ,7 CS-46/ x x ,1 CS-54/ x x ,9 CS-54/ x x ,9 CS-54/ x x ,5 CS-55/ x x ,4 CS-64/ x x ,2 CS-64/ x x ,5 CS-64/ x x ,4 CS-65/ x x ,8 CS-65/ x x ,1 CS-65/ x x ,8 CS-66/ x x ,1 CS-66/ x x ,5 CS-66/ x x ,8 CS-68/ x x ,1 CS-75/ x x ,6 CS-75/ x x ,7 CS-84/ x x ,2 CS-84/ x x ,2 CS-86/ x x ,8 CS-86/ x x ,9 CS-86/ x x ,0 CS-88/ x x ,8 CS-88/ x x ,2 CS-810/ x x ,3 CS-106/ x x ,4 CS-106/ x x ,5 CS-108/ x x ,1 CS-108/ x x ,0 CS-1010/ x x ,2 CS-126/ x x ,7 CS-128/ x x ,2 CS-1210/ x 172x x ,2 CS-1212/ EATON CORPORATION xxxxx+xxxx-xxxxen

6 - Accessories Set of Wall-Mounting Brackets For fixing the enclosures on the wall Vertical or horizontal mounting Material of the brackets: zinc-plated sheet steel 3 mm One set includes 4 wall-mounting brackets plus mounting accessories For enclosure Type Article No. Units per package (pcs.) VT03010 CS WFB-SET-CS Universal Locks Lock plate made of high-grade, shock-proof zinc die-casting Lock inserts and lock bolts made of metal Colour dusty grey RAL 7037, powder-coated For indoor and outdoor applications Counternut of metal, with chamfering Compatible with standard lock bolts For standardized door cut-outs sized 22.5 x 20.4 mm Description Type Article No. Units per package (pcs.) VT11910, VT11810, VT mm two-way key-bit LC-DBIT3-CS mm two-way key-bit LC-DBIT5-CS Identical locking, lock cylinder with 2 keys LC-ZSBIT-CS Ease-of-use Rotary Handle Rotary handle suitable for standardized profile half-cylinders With integrated indication of lock position Available as a retro-fitting or complete set Handle made of high-grade shock-proof zinc die-casting Compatible with all LC-... universal locks For standardized door cut-outs sized 22.5 x 20.4 mm Colour dusty grey RAL 7037, powder-coated Profile half-cylinder to be ordered separately Description Type Article No. Units per package (pcs.) VT12210, VT12110 Complete set PHZ-A-COMP Retro-fitting set PHZ-A-ADD-ON PHZ-A-COMP PHZ-A-ADD-ON 6 EATON CORPORATION xxxxx+xxxx-xxxxen

7 - Accessories Profile Half-Cylinder for Ease-of-use Handles For rotary and clip-down ease-of-use handles Lock-cylinder finish according to DIN and DIN EN 1303 Profile half-cylinder 10/30 with pin closures made of nickel silver 8-fold adjustable lock bit, 5 pairs of pins Keyed alike or different Description Type Article No. Units per package (pcs.) VT12210, VT Key included, keyed alike PHZ-E10/30-GS Keys included, keyed different PHZ-E10/30-VS PHZ-E10/30 Spare Key for Profile Half-Cylinder For profile half-cylinder PHZ-E...-GS Description Type Article No. Units per package (pcs.) VT12510 Identical locking KEY-E10/30-GS Depth-Adjustment Elements for Mounting Plates Depth-adjustable on a 25 mm grid Sheet steel, zinc-plated Fastening material included Dimensions Enclosure Depth (mm) Type Article No. Units per package (pcs.) VT16110, VT DAS-SET/150-CS DAS-SET/200-CS DAS-SET/250-CS DAS-SET/300-CS DAS-SET/...-CS Cage Nuts for Mounting Plates with Punch Holes MPP... Thread of screw Type Article No. Units per package (pcs.) wa_vt29413 M6 CANU-M6-CS M8 CANU-M8-CS EATON CORPORATION xxxxx+xxxx-xxxxen

8 - Accessories Mounting Plate with Punch Holes, for Cage Nuts Punch holes for cage nuts size M6 or M8 Sheet steel, zinc-plated Fastening material not included Dimensions Enclosure HeightxWidth (mm) Type Article No. Units per package (pcs.) VT x200 MPP-2520-CS x200 MPP-3020-CS x300 MPP-3030-CS x40 MPP-3040-CS x300 MPP-4030-CS x400 MPP-4040-CS x600 MPP-4060-CS x400 MPP-5040-CS x500 MPP-5050-CS x400 MPP-6040-CS x500 MPP-6050-CS x600 MPP-6060-CS x800 MPP-6080-CS x500 MPP-7050-CS x400 MPP-8040-CS x600 MPP-8060-CS x800 MPP-8080-CS x1000 MPP CS x600 MPP CS x800 MPP CS x1000 MPP CS x600 MPP CS x800 MPP CS x1000 MPP CS x1200 MPP CS Mounting Plate without Punch Holes, Powder-coated RAL 2000 Without punch holes, powder-coated RAL 2000 Sheet steel Fastening material not included Dimensions Enclosure HeightxWidth (mm) Type Article No. Units per package (pcs.) VT x200 MPL-2520/RAL2000-CS x200 MPL-3020/RAL2000-CS x300 MPL-3030/RAL2000-CS x400 MPL-3040/RAL2000-CS x300 MPL-4030/RAL2000-CS x400 MPL-4040/RAL2000-CS x600 MPL-4060/RAL2000-CS x400 MPL-5040/RAL2000-CS x500 MPL-5050/RAL2000-CS x400 MPL-6040/RAL2000-CS x500 MPL-6050/RAL2000-CS x600 MPL-6060/RAL2000-CS x800 MPL-6080/RAL2000-CS x500 MPL-7050/RAL2000-CS x400 MPL-8040/RAL2000-CS x600 MPL-8060/RAL2000-CS x800 MPL-8080/RAL2000-CS x1000 MPL-80100/RAL2000-CS x600 MPL-10060/RAL2000-CS x800 MPL-10080/RAL2000-CS x1000 MPL /RAL2000-CS x600 MPL-12060/RAL2000-CS x800 MPL-12080/RAL2000-CS x1000 MPL /RAL2000-CS x1200 MPL /RAL2000-CS EATON CORPORATION xxxxx+xxxx-xxxxen

9 - Accessories Mounting Plate, without Punch Holes, Galvano Zinc-plated Without punch holes, galvano zinc-plated Sheet steel Fastening material not included Dimensions Enclosure HeightxWidth (mm) Type Article No. Units per package (pcs.) VT x200 MPL-2520-CS x200 MPL-3020-CS x300 MPL-3030-CS x400 MPL-3040-CS x300 MPL-4030-CS x400 MPL-4040-CS x600 MPL-4060-CS x400 MPL-5040-CS x500 MPL-5050-CS x400 MPL-6040-CS x500 MPL-6050-CS x600 MPL-6060-CS x800 MPL-6080-CS x500 MPL-7050-CS x400 MPL-8040-CS x600 MPL-8060-CS x800 MPL-8080-CS x1000 MPL CS x600 MPL CS x800 MPL CS x1000 MPL CS x600 MPL CS x800 MPL CS x1000 MPL CS x1200 MPL CS Door for Internal Separation Inside door for operating and signalling devices Sheet steel, powder-coated RAL 7035 Depth-adjustment elements DAS-SET...-CS for mounting plates, required in addition Locks are not included in the scope of delivery LC-...BIT-CS Dimensions Enclosure HeightxWidth (mm) Type Article No. Units per package (pcs.) VT14210 VT15610 DI-...-CS 250x200 DI-2520-CS x200 DI-3020-CS x300 DI-3030-CS x400 DI-3040-CS x300 DI-4030-CS x400 DI-4040-CS x600 DI-4060-CS x400 DI-5040-CS x500 DI-5050-CS x400 DI-6040-CS x500 DI-6050-CS x600 DI-6060-CS x800 DI-6080-CS x500 DI-7050-CS x400 DI-8040-CS x600 DI-8060-CS x800 DI-8080-CS x1000 DI CS x600 DI CS x800 DI CS x1000 DI CS x600 DI CS x800 DI CS x1000 DI CS x1200 DI CS EATON CORPORATION xxxxx+xxxx-xxxxen

10 - Accessories Bottom Panels with F3A Flange Openings Not suitable for CS-.../150 enclosures For F3A-... flanges With foam sealant, max. degree of protection is IP66 if correctly used with F3A-... Material: Sheet steel, powder-coated RAL 7035 Can also be used as a top panel if the enclosure is turned by 180 For enclosure Number Suitable Type Article No. Units per dimensions of flange for package width (mm) openings (pcs.) VT CS-33/200 AFP-3-CS CS-43/200 VT54214 VT54514 VT54314 VT54414 VT CS-34/200 AFP-4-CS CS-44/200 CS-54/200 CS-54/250 CS-64/200 CS-64/250 CS-84/200 CS-84/ CS-55/250 AFP-5-CS CS-65/200 CS-65/250 CS-75/200 CS-75/ CS-46/200 AFP-6-CS CS-46/250 CS-46/300 CS-66/200 CS-66/250 CS-66/300 CS-86/200 CS-86/250 CS-86/300 CS-106/250 CS-106/300 CS-126/ CS-68/300 AFP-8-CS CS-88/200 CS-88/300 CS-108/250 CS-108/300 CS-128/ CS-810/300 AFP-10-CS CS-1010/300 CS-1210/300 VT54314, VT x2 CS-1212/250 AFP-12-CS EATON CORPORATION xxxxx+xxxx-xxxxen

11 - Accessories Bottom Panels with FL21 Flange Openings Not suitable for CS2520/150 and CS-32/150 enclosures For FL21 flanges With foam sealant, max. degree of protection is IP66 if correctly used with FL21 Material: Sheet steel, powder-coated RAL7035 Can also be used as a top panel if the enclosure is turned by 180 For enclosure Number Suitable Type Article No. Units per dimensions of flange for package width (mm) openings (pcs.) VT CS-33/150 AFP-FL21/112X232-CS CS-43/ CS-44/150 AFP-FL21/112X332-CS CS-54/150 CS-65/ CS-33/200 AFP-FL21/172X262-CS CS-43/ CS-34/200 AFP-FL21/172X332-CS CS-44/200 CS-54/200 CS-54/250 CS-64/200 CS-64/250 CS-84/200 CS-84/ CS-55/250 AFP-FL21/172X432-CS CS-65/200 CS-65/250 CS-75/200 CS-75/ CS-46/200 AFP-FL21/172X532-CS CS-46/250 CS-46/300 CS-66/200 CS-66/250 CS-66/300 CS-86/200 CS-86/250 CS-86/300 CS-106/250 CS-106/300 CS-126/ CS-68/300 AFP-FL21/172X732-CS CS-88/200 CS-88/300 CS-108/250 CS-108/300 CS-128/ CS-810/300 AFP-FL21/172X932-CS CS-1010/300 CS-1210/ x2 CS-1212/250 AFP-FL21/172X532-CS EATON CORPORATION xxxxx+xxxx-xxxxen

12 - Accessories Bottom Panels without Openings Degree of protection of the enclosure: IP66 With foam sealant all around Sealant is protected in the deep-drawn area Powder-coated RAL 7035 Dimensions Enclosure WidthxDepth (mm) Type Article No. Units per pack. (pcs.) wa_vt x112 SFP-112X182-CS x112 SFP-112X232-CS x112 SFP-112X332-CS x172 SFP-172X262-CS x172 SFP-172X332-CS x172 SFP-172X432-CS x172 SFP-172X532-CS x172 SFP-172X732-CS x172 SFP-172X932-CS Set of Lifting Eyebolts and Profile Brackets As a re-enforcement of the inside enclosure, to accommodate the lifting eyebolts Lifting eyebolts with an M12 thread Profile brackets made of stable, 3 mm thick sheet steel IP66 degree of protection is maintained Each set includes 2 lifting eyebolts, profile brackets and seals Length (mm) Type Article No Units per pack. (pcs.) VT16210, VT TOR-SET/135-CS Material for Fixing on a Mast For fixing on round or square masts Set consisting of profile rail, tensioning strap and tensioning screw Sheet steel, zinc-plated, tensioning strap made of stainless steel For mast diameters of 150 to 215 mm Dimensions Enclosure Width (mm) Type Article No Units per pack. (pcs.) VT MAST-FIT-CS Cable Interconnect Base Height 200 mm Sheet steel, powder-coated RAL 7035 Front and side panels can be removed Fastening material is included Cable strain relief rail is not included in the scope of delivery Dimensions Enclosure WidthxDepth (mm) Type Article No Units per (pcs.) VT x250 PLI-6/ CS x300 PLI-6/ CS x250 PLI-8/ CS x300 PLI-8/ CS x300 PLI-10/ CS x250 PLI-12/ CS EATON CORPORATION xxxxx+xxxx-xxxxen

13 - Accessories Doors with an Inspection Glass Degree of protection of the enclosure: IP66 Frame made of sheet steel, powder-coated, safety inspection glass Without hinges, without lock Dimensions Enclosure HeightxWidth (mm) Type Article No Units per package (pcs.) VT14710 VT15110 DT-...-CS 250x200 DT-2520-CS x200 DT-3020-CS x300 DT-3030-CS x40 DT-3040-CS x300 DT-4030-CS x400 DT-4040-CS x600 DT-4060-CS x400 DT-5040-CS x500 DT-5050-CS x400 DT-6040-CS x500 DT-6050-CS x600 DT-6060-CS x800 DT-6080-CS x500 DT-7050-CS x400 DT-8040-CS x600 DT-8060-CS x800 DT-8080-CS x1000 DT CS x600 DT CS x800 DT CS x1000 DT CS x600 DT CS x800 DT CS x1000 DT CS x1200 DT CS Doors (without inspection glass) Degree of protection of the enclosure: IP66 Sheet steel, powder-coated Without hinges, without lock Dimensions Enclosure HeightxWidth (mm) Type Article No Units per package (pcs.) VT x200 DS-2520-CS x200 DS-3020-CS x300 DS-3030-CS x40 DS-3040-CS x300 DS-4030-CS x400 DS-4040-CS x600 DS-4060-CS x400 DS-5040-CS x500 DS-5050-CS x400 DS-6040-CS x500 DS-6050-CS x600 DS-6060-CS x800 DS-6080-CS x500 DS-7050-CS x400 DS-8040-CS x600 DS-8060-CS x800 DS-8080-CS x1000 DS CS x600 DS CS x800 DS CS x1000 DS CS x600 DS CS x800 DS CS x1000 DS CS x1200 DS CS EATON CORPORATION xxxxx+xxxx-xxxxen

14 - Accessories Door Arrestor To stop a door in a defined position Sheet steel, zinc-plated Fastening material included Dimensions Enclosure Width (mm) Type Article No Units per pack. (pcs.) VT DOOR-RET-CS Universal Brackets for Door Contact Switches, Cable Duct Holders For fixing door contact switches or cable duct holders Sheet steel, zinc-plated Dimensions Enclosure Width (mm) Type Article No Units per pack. (pcs.) VT UNI-BRA-CS Quick-C Hinge Pin With Quick-Change system, for removal without the need of using any tools Type Article No Units per pack. (pcs.) VT55114 QUICK-C-CS Mounting Brackets, inclined For mounting TS35X7.5 or TS35X15 support rails in an inclined position Sheet steel, zinc-plated Type Article No Units per pack. (pcs.) VT27110 TS1-BRA-CS EATON CORPORATION xxxxx+xxxx-xxxxen

15 - Accessories Mounting Webs for Door Profile Bars and Cable Ducts For fixing on vertical door profiles For screw-less mounting of KL... cable ducts by snapping cable duct covers onto the rear M6 fixing holes every 25 mm Sheet steel, zinc-plated Dimensions Enclosure Width (mm) Type Article No Units per pack. (pcs.) wa_vt MTR-D3-CS MTR-D4-CS MTR-D5-CS MTR-D6-CS MTR-D8-CS EATON CORPORATION xxxxx+xxxx-xxxxen

16 - Accessories Cable ducts _0, VT08709, VT Supplied in Cable carrying Type and cross-section Type Article No Units per lengths of capacity. Max. no. of H 0... V-K H 0... V-K package mm cables (approximate) mm 2 AWG (pcs.) Screw fixing ,75 KL25/ , , _0, VT08709, VT ,75 KL25/ , , _0, VT08409, VT ,75 KL60/ , , _0, VT08709, VT Self-adhesive Ambient temperature max. +55 C ,75 KL25/35K , , _0, VT08709 Cable duct cover For replacement delivery 1500 KD _0, VT KD EATON CORPORATION xxxxx+xxxx-xxxxen

17 - Accessories Cable support brackets Can be used in KL25/35 (K) cable ducts, screw fixing Supplied in Cable carrying Type and cross-section Type Article No Units per lengths of capacity. Max. no. of H 0... V-K package mm cables (approximate) mm 2 (pcs.) VT28009 o KH25/ Clamping brackets for cable ducts Type Article No Units per (pcs.) VT o 4.5 KL25/...: Fixing interval less than 500 mm KK VT o 4.5 K60/60: Fixing interval less than 300 mm KK Canopy For direct fixing on the base body of the enclosures Material: Sheet steel, powder-coated, RAL7035 Fastening material included in the delivery For enclosure sizes [mm] Type Article No Units per Width Depth Height of Top pack. (pcs.) VT CNP-2/150-CS CNP-3/150-CS CNP-3/200-CS CNP-4/150-CS CNP-4/200-CS CNP-4/250-CS CNP-5/150-CS CNP-5/200-CS CNP-5/250-CS CNP-6/200-CS CNP-6/250-CS CNP-6/300-CS CNP-8/200-CS CNP-8/250-CS CNP-8/300-CS CNP-10/300-CS CNP-12/250-CS EATON CORPORATION xxxxx+xxxx-xxxxen

18 - Accessories Ventilation Louvers For direct fixing on the base body of the enclosures Material: Sheet steel, powder-coated, RAL7035 Fastening material included in the delivery Degree of protection IP23 Positioning Dimensions (mm) Type Article No Units per of the slots Height Width pack. (pcs.) wa_vt25113 vertical LVP-20V12-CS horizontal LVP-20H12-CS vertical LVP-30V15-CS horizontal LVP-30H15-CS Earthing set for Door, BFZ-DES Cross section 6 mm 2 Assembly accessories included Description Type Article No Units per pack. (pcs.) wa_vt25113 BFZ-DES Circuit Diagram Bag, SPT Made of insulating material, fixing by self-sticker, RAL 7035 light gray Description Type Article No Units per pack. (pcs.) wa_vt01315, wa_vt01215, wa_vt01115 DIN A4 crosswise SPT DIN A5 crosswise SPT DIN A6 crosswise SPT Flask with Brush Applicator, BPZ-CPS-7035 Plastic material, self-adhesive, RAL 7035 light gray Colour Type Article No Units per pack. (pcs.) VT09405 RAL 7035 BPZ-CPS EATON CORPORATION xxxxx+xxxx-xxxxen

19 - Accessories ITB Industrial Cable Tie Wraps For bundling up and fixing of wires, wire harnesses, conduits, pipes... Continuously ribbed to the tip Temperature resistant from -40 to +85 C Material PO 6.6, natural colour, low flammability UL 94 V2 Resistant to oils, petrol, salt water; solvents, mould Length Width Bundle Special Features Tensile Type Article No Units per Range Strength package mm mm mm N (pcs.) VT , ITB VT , ITB VT ,2 60 with 220 ITB mounting eye 4.8 mm F3A Flanges Colour RAL 7035 Degree of protection IP66 (F3A-D with degree of protection reduced to IP54) Description Type Article No Units per pack. (pcs.) VT17407, VT09208, VT17507, VT17307, VT17607, VT17707, VT17807, VT17207 Blind flange F3A Blind flange, sheet steel F3A-XP xM16, 6xM25/16, 8xM32/20 F3A xM20, 8xM25/16, 4xM32/20, 1xM50/32 F3A xM16, 12xM20, 2xM40/25, 2xM50/32 F3A xM16, 13xM20 F3A Grommets for cables up to Ø 70mm F3A-KTD Cellular rubber insertion flange F3A-D cables Ø 10-13mm, 4 cables Ø 17-21mm, 2 cables Ø 27-30mm 19 EATON CORPORATION xxxxx+xxxx-xxxxen

20 - Accessories Membrane Grommets - Metric IP66, with integrated insertion membrane PE and thermoplastic elastomer, halogen-free Cable Hole Outer Cable Use of Cable Type Article No Units per Insertion Diameter Diameter NYM/NYY, 4-wire package mm mm mm 2 (pcs.) VT06508 M H03VV-F3 x 0.75 mm 2, KT-M NYM 1 x 16/3 x 1.5 mm 2 M H03VV-F3 x 0.75 mm 2, KT-M NYM 5 x 1.5/5 x 2.5 mm 2 M H03VV-F3 x 0.75 mm 2, KT-M NYM 4 x 10 mm 2 M H03VV-F3 x 0.75 mm 2, KT-M NYM 4 x 16/5 x 10 mm 2 Cable Glands - Metric, according to EN IP68 up to 5 bar, polyamide, halogen-free Fire classification V2 according to UL94 Colour RAL 7035 VT05708 Cable Hole Outer Cable Use of Cable Type Article No Units per Insertion Diameter Diameter NYM/NYY, 4-wire package mm mm mm 2 (pcs.) Cable glands, metric, with counternut and integrated strain relief M H03VV-F 3 x 0.75 mm 2, V-M NYM 1 x 2.5 mm 2 M H03VV-F 3 x 1.5 mm 2, V-M NYM 1 x 16/3 x 1.5 mm 2 M H05VV-F 4 x 2.5/3 x 4 mm 2, V-M NYM 5 x 1.5/5 x 2.5 mm 2 M H05VV-F 5 x 2.5/5 x 4 mm 2, V-M NYM 5 x 2.5/5 x 6 mm 2 M NYM 5 x 10 mm 2 V-M M NYM 5 x 16 mm 2 V-M M NYM 4 x 35/5 x 25 mm 2 V-M M NYM 4 x 35 mm 2 V-M VT06708 Multiple Sealing, Metric, for Cable Glands V-M... M25 4 x 5 6 H03VV-F 2 x 0.75/3 x 0.75 mm 2 MFD M32 4 x H03VV-F 4 x 0.75 mm 2 MFD VT07208 Sealing Plugs for Spare Openings in Multiple Sealing MFD... M25 MFV M32 MFV Cable Grommets PG For a wall thickness of 2-8 mm Colour RAL 7035 Plasticised PVC, cadmium- and lead free IP66, cable insertion from bottom Cable Hole Outer Cable Use of Cable Type Article No Units per Insertion Diameter Diameter NYM/NYY, 4-wire package mm mm mm 2 (pcs.) VT05708 PG KT13, PG KT PG KT PG KT PG KT PG KT EATON CORPORATION xxxxx+xxxx-xxxxen

21 - Accessories Cable Grommets For a panel thickness of 2 to 3 mm Colour RAL 7035 Plasticised PVC IP66, cable insertion from bottom Cable Hole Outer Cable Use of Cable Type Article No Units per Insertion Diameter Diameter NYM/NYY, 4-wire package mm mm mm 2 (pcs.) VT KT KT Cable Gland for Ventilation IP69K Colour RAL 7035 Cable Hole Outer Cable Use of Cable Type Article No Units per Insertion Diameter Diameter NYM/NYY, 4-wire package mm mm mm 2 (pcs.) VT02610 M H05VV-F 4 x 2.5 / 3 x 4 mm 2, V-M20-VENT NYM 5 x 1.5 / 5 x 2.5 mm 2 21 EATON CORPORATION xxxxx+xxxx-xxxxen

22 Technical Data General information Standards and regulations IEC/EN 62208, UL508A (E336299) Climatic resistance Moist heat, constant according to IEC , Moist heat, periodic according to IEC Ambient temperature C -40 to +70 Degree of protection IP66 Degree of protection with ventilation panels IP23 Set-up locations Indoor/outdoor 1) Incorporation grid mm 25 Dissipated power loss See separate table Material Material Sheet steel Surface finish Structured powder-coating on Polyester base Colour RAL 7035, light grey Surface Slightly structured Degree of gloss Glossy Body mm CS-65/...: 1,2; CS-66/...: 1,5 Mounting plate mm 2; as of height 800 x width 400mm: 3 Door mm CS-43/...: 1,0; CS-64/...: 1,2; CS-88/...: 1,5; CS-1212/...: 2,0 Bottom panel mm 1.5 Material properties Mechanical Shock-resistance rating IK09 according to EN Assembly weight - entire cabinet See separate table Assembly weight - door See separate table Assembly weight - mounting plate See separate table Assembly weight - wall-mounting brackets See separate table Description/Basic equipment Type of construction Folded and seam-welded, 2 M6 threaded bolts are included for protective conductor connection inside the enclosure Rear panel 9 mm holes for wall-fixing Side panels No holes Top panel No holes Bottom panel No holes, foam sealant, removable for F3A-... flanges or for customized solutions Mounting plate Basic equipment, sheet steel, sendzimir zinc-plated. 15 mm clearance to rear panel. Mounted onto M8 copper thread-welding bolt. Therefore an additional protective conductor connection is not compulsory. Door 1 M6 thread-welding bolt for protective conductor connections in the door. Where electrical operating material needs to be integrated in the door, a consistent and permanent protective conductor connection needs to be established by means of a protective conductor cable. Please use the thread-welding bolts on the door and on the side panel of the body as connecting points. Door hinges Right side, can be reversed on-site Door opening angle 120 Locking system Metal turnbuckle. standard lock. 3 mm two-way key-bit. Locks Number See Ordering Section General information Load of wall-mounting Material plastic Resistance of plastics to glow wire C 650 C Intended location outdoor 1) and indoor 500 kg with vertically and horizontally fixed mounting brackets, symmetrical load free from halogen 1) Outdoor location only under a separate protective roof. The enclosure must be permanently protected from the rays of the sun and the weather. 22 EATON CORPORATION xxxxx+xxxx-xxxxen

23 Technical Data Maximum assembly weight Max. kg Enclosure Max. kg Mounting Plate Max. kg Door CS-2520/ CS-32/ CS-33/ CS-33/ CS-34/ CS-43/ CS-43/ CS-44/ CS-44/ CS-46/ CS-46/ CS-46/ CS-54/ CS-54/ CS-54/ CS-55/ CS-64/ CS-64/ CS-64/ CS-65/ CS-65/ CS-65/ CS-66/ CS-66/ CS-66/ CS-68/ CS-75/ CS-75/ CS-84/ CS-84/ CS-86/ CS-86/ CS-86/ CS-88/ CS-88/ CS-810/ CS-106/ CS-106/ CS-108/ CS-108/ CS-1010/ CS-126/ CS-128/ CS-1210/ CS-1212/ EATON CORPORATION xxxxx+xxxx-xxxxen

24 Technical Data Maximum assembly weight per set Adjustment of bracket symmetrical load n brackets position of bracket V H F [N] < 4900 V or H 500 kg 4 top and bottom Amount of heat to be dissipated Amount of heat to be dissipated (power loss) P V [W] for all-over closed, wall-mounted Eaton CS sheet steel enclosures without internal separations.. Example: Max. ambient temperature 35 C; excess temperature ΔT = 20 K; relative humidity = 75%. Code Max. power loss P V Max. power loss P V Max. power loss P V Single wall-mounted enclosure First wall-mounted enclosure Wall-mounted enclosure in the center CS-2520/ W 10 W 9 W CS-32/ W 11 W 10 W CS-33/ W 15 W 14 W CS-33/ W 18 W 16 W CS-34/ W 22 W 21 W CS-43/ W 19 W 18 W CS-43/ W 22 W 20 W CS-44/ W 24 W 22 W CS-44/ W 27 W 25 W CS-54/ W 28 W 27 W CS-54/ W 32 W 30 W CS-46/ W 37 W 35 W CS-46/ W 42 W 39 W CS-46/ W 46 W 43 W CS-54/ W 36 W 33 W CS-55/ W 42 W 39 W CS-64/ W 33 W 31 W CS-64/ W 37 W 34 W CS-65/ W 39 W 37 W CS-65/ W 44 W 41 W CS-64/ W 42 W 38 W CS-65/ W 49 W 45 W CS-66/ W 51 W 48 W CS-66/ W 56 W 52 W CS-66/ W 61 W 57 W CS-68/ W 76 W 72 W CS-75/ W 50 W 47 W CS-75/ W 55 W 51 W CS-84/ W 47 W 44 W CS-84/ W 53 W 48 W CS-86/ W 64 W 60 W CS-86/ W 76 W 70 W CS-88/ W 81 W 77 W CS-86/ W 70 W 65 W CS-88/ W 95 W 89 W CS-810/ W 113 W 108 W CS-106/ W 85 W 79 W CS-106/ W 91 W 84 W CS-108/ W 106 W 100 W CS-108/ W 113 W 106 W CS-1010/ W 136 W 128 W CS-126/ W 99 W 92 W CS-128/ W 132 W 123 W CS-1210/ W 158 W 149 W CS-1212/ W 173 W 166 W 24 EATON CORPORATION xxxxx+xxxx-xxxxen

25 Dimensions (mm) CS Wall-mounted Enclosure with door and blind flanges = t2 = 4 a b 15.2 c-43 c-20 c c-21 a-5 t1 c+6 c b-2.5 Doors for internal separation DI-...-CS a-63 a-56 b-55 b Note: Please refer to selection page xx for A, B, C, t1, t2 values 25 EATON CORPORATION xxxxx+xxxx-xxxxen

26 Dimensions (mm) CS Wall-mounted Enclosure without door, without blind flanges t4 a-45 t3 b EATON CORPORATION xxxxx+xxxx-xxxxen

27 Dimensions (mm) Doors CS-2520/150, CS-32/150 DS-2520-CS, DS-3020-CS CS-33/..., CS-34/..., CS-4.../... DS-3030-CS, DS-3040-CS, DS-4...-CS o b-2.5 = = a b-2.5 o4 = = a CS-5.../..., CS-6.../..., CS-7.../... DS-5...-CS, DS-6...-CS, DS-7...-CS CS-8.../... DS-8...-CS b-2.5 o4 a o b = = a Note: Please refer to selection page xx for A, B, C values 27 EATON CORPORATION xxxxx+xxxx-xxxxen

28 Dimensions (mm) Doors Mounting Opening - Lock CS-10.../..., CS-12.../... DS CS, DS CS 27.5 q o o b = = a Position of the 4 holes at the rear panel of the enclosure for wall-mounting 4 x o 9 Position of the 4 threaded bolts at the rear panel of the enclosure 40 4 x M8 x 25 Distance between two holes between two door profile bars: 40 Width B Distance between two holes (mm) , , , , , , ,4 28 EATON CORPORATION xxxxx+xxxx-xxxxen

29 Dimensions (mm) Dimensions Enclosure Dimensions Doors Type a b c t1 t2 t3 t4 CS-2520/ CS-32/ CS-33/ CS-33/ CS-34/ CS-43/ CS-43/ CS-44/ CS-44/ CS-46/ CS-46/ CS-46/ CS-54/ CS-54/ CS-54/ CS-55/ CS-64/ CS-64/ CS-64/ CS-65/ CS-65/ CS-65/ CS-66/ CS-66/ CS-66/ CS-68/ CS-75/ CS-75/ CS-84/ CS-84/ CS-86/ CS-86/ CS-86/ CS-88/ CS-88/ CS-810/ CS-106/ CS-106/ CS-108/ CS-108/ CS-1010/ CS-126/ CS-128/ CS-1210/ CS-1212/ x Enclosure Door Height Width Height Width , , , , , , , , , , , , , , , , , , , , , , , , ,5 29 EATON CORPORATION xxxxx+xxxx-xxxxen

30 Dimensions (mm) Doors with an Inspection Glass DT-...-CS M1 M3 a±0.5 M3 M2 M4 b±0.5 M4 Dimensions for Doors with an Inspection Glass Enclosure Enclosure Height Width a b M1 M2 M3 M EATON CORPORATION xxxxx+xxxx-xxxxen

31 Dimensions (mm) Bottom of Enclosure with F3A Flange Openings 31 EATON CORPORATION xxxxx+xxxx-xxxxen

32 Dimensions (mm) Bottom of Enclosure, with Flange Openings F3A Mounting Plates MPP, MPL 5 x 45 b-90 b o a, b = Dimensions of the enclosure X a-70 a-30 X Type Mounting Plate Height Width CS-2520/ CS-32/ CS-33/ CS-33/ CS-34/ CS-43/ CS-43/ CS-44/ CS-44/ CS-46/ CS-46/ CS-46/ CS-54/ CS-54/ CS-54/ CS-55/ CS-64/ CS-64/ CS-64/ CS-65/ CS-65/ CS-65/ CS-66/ CS-66/ CS-66/ CS-68/ CS-75/ CS-75/ CS-84/ CS-84/ CS-86/ CS-86/ CS-86/ CS-88/ CS-88/ CS-810/ CS-106/ CS-106/ CS-108/ CS-108/ CS-1010/ CS-126/ CS-128/ CS-1210/ CS-1212/ Depth-adjustment elements for mounting plates DAS-SET/ -CS Mounting webs for door profile bars and cable ducts MTR-D -CS Type B MTR-D3-CS 220 MTR-D4-CS 320 MTR-D5-CS 420 MTR-D6-CS 520 MTR-D8-CS 720 b EATON CORPORATION xxxxx+xxxx-xxxxen

33 Dimensions (mm) Wall-mounting bracket WFB-SET-CS Set of lifting eyebolts with profile brackets TOR-SET/135-CS o R M o Bottom Panels with Flange Openings (for F3A Flanges) 33 EATON CORPORATION xxxxx+xxxx-xxxxen

34 Dimensions (mm) Flange Plastic F3A Opening of Flange Fixing on a mast MAST-FIT-CS Ease-of-use Rotary Handle PHZ-A Canopy Type c+23 (mm) t (mm) CNP-2/150-CS CNP-3/150-CS CNP-3/200-CS CNP-4/150-CS CNP-4/200-CS CNP-4/250-CS CNP-5/150-CS CNP-5/200-CS CNP-5/250-CS CNP-6/200-CS CNP-6/250-CS CNP-6/300-CS CNP-8/200-CS CNP-8/250-CS CNP-8/300-CS CNP-10/300-CS CNP-12/250-CS c = Depth of enclosure 34 EATON CORPORATION xxxxx+xxxx-xxxxen

35 Dimensions (mm) Ventilation Louvers Cable Interconnect Base PLI-./ CS b / /162.5 B-242 B-73 B-31 B / / / EATON CORPORATION xxxxx+xxxx-xxxxen

36 Dimensions (mm) Cable Grommets PG KT13,5 KT16 KT21 KT29 KT36 KT42 36 EATON CORPORATION xxxxx+xxxx-xxxxen

37 Dimensions (mm) Cable Grommets KT3 KT4 37 EATON CORPORATION xxxxx+xxxx-xxxxen