Compact Distribution Boxes

Transcription

1 Compact Distribution Boxes Surface-Mounted and Flush-Mounted Compact Distribution Boxes xboard BC-O-...(-TW)-ECO / BC-U-...(-TW)-ECO Electrical Design according to IEC 439-1, -3 Degree of protection IP 40 Protection class II Rated voltage 400 V AC / 50 Hz For network systems TN, TT, IT Mechanical Material ABS Colour RAL 9003 Temperatue resistance -20 C bis +70 C N-PE terminal points N PE BC-..-1/5(-TW)-ECO 4x10 mm 2 4x10 mm 2 BC-..-1/8(-TW)-ECO 8x10 mm 2 8x10 mm 2 BC-..-1/12(-TW)-ECO 12x10 mm 2 12x10 mm 2 BC-..-1/18(-TW)-ECO 18x10 mm 2 ) 18x10 mm 2 BC-..-2/24(-TW)-ECO 2x(12x10 mm 2 ) 2x(12x10 mm 2 ) BC-..-2/36(-TW)-ECO 2x(18x10 mm 2 ) 2x(18x10 mm 2 ) BC-..-3/36(-TW)-ECO 3x(12x10 mm 2 ) 3x(12x10 mm 2 ) BC-O-3/54(-TW)-ECO 3x(18x10 mm 2 ) 3x(18x10 mm 2 ) Flush-mounted compact distribution boxes BC-U-...(-TW)-ECO ,5 230 BC-U-1/5(-TW)-ECO BC-U-1/8(-TW)-ECO BC-U-1/12(-TW)-ECO BC-U-1/18(-TW)-ECO BC-U-2/24(-TW)-ECO BC-U-3/36(-TW)-ECO 1

2 Compact Distribution Boxes Surface-mounted compact distribution boxes BC-O-...(-TW)-ECO ,5 230 BC-O-1/5(-TW)-ECO BC-O-1/8(-TW)-ECO BC-O-1/12(-TW)-ECO BC-O-1/18(-TW)-ECO BC-O-2/24(-TW)-ECO BC-O-2/36(-TW)-ECO BC-O-3/36(-TW)-ECO 335 BC-O-3/54(-TW)-ECO 2

3 Compact Distribution Boxes Flush-Mounted Compact Distribution Box Global Line KLV-U Wall box - Protection Class II: All insulated; serial cable traction relief; line entrance from above and below with snap lock. For hollow walls, retrofittable with KLV-U-HWBFS. Cover: Removable plastic ; 12+2 MU - device recesses for each row; can be leaded Surface levelling frame and door: Levelling possible to offset surface unevenness of up to 18 mm F, SF: sheet steel D, DT: plastic Design A Advantages: Neutral and earth conductor terminals installed by manufacturer; adjustment possible to offset surface unevenness. The coloured elements of plastic designer doors are available in white, transparent, red, blue, yellow, and green and can be changed without tools. Doors for Global Line flush Scope of delivery steel door F and SF: steel door plus frame, rotary door handle, doorframe fastening elements Scope of delivery plastic designer door D and DT: Designer door with doorframe, doorframe fastening elements, door handle and hinge elements available in six colours Electrical Design in accordance with IEC/EN , EN Degree of protection IP30 according to EN Protection class II Rated voltage Insulating voltage 400 V AC / 50 Hz 400 V AC Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the distribution box: 1 row 19 W 2 row 32 W 3 row 41W 4 row 49 W Steel door superflat SF Mechanical Material: Flush Cover Terminal support Wall box Door/doorframe Designer version ( D, DT ) Colour D Colour DT Sheet ( F, SF ) PS PPO PS PC white transparent-grey steel sheet (phosphatised and powder-coated) Colour white RAL 9016 Distance between DIN rails 125 mm N-PE terminals: N PE 1 row row row row Device support rail DIN rail 35 x 7.5 mm galvanised steel sheet acc. to IEC/EN The load on the device support rail must not exceed 6 kg per row. Type TE a b KLV-U-1/ KLV-U-2/ KLV-U-3/ KLV-U-4/ Steel door flat F Door designer version D, DT 3

4 Compact Distribution Boxes Flush-Mounted Compact Distribution Box Global Line KLV-U Wall box - Protection Class II: All insulated; serial cable traction relief; line entrance from above and below with snap lock. Cover: Removable plastic ; 12+2 MU - device recesses for each row; can be leaded Surface levelling frame and door: Levelling possible to offset surface unevenness of up to 18 mm F, SF: sheet steel D, DT: plastic Design G Advantages: Neutral and earth conductor terminals installed by manufacturer; adjustment possible to offset surface unevenness. The coloured elements of plastic door designer version are available in white, transparent, red, blue, yellow, and green and can be changed without tools. Doors for Global Line flush Scope of delivery steel door F and SF: steel door with frame, rotary door handle, doorframe fastening elements Scope of delivery plastic door designer version D and DT: Designer door with doorframe, doorframe fastening elements, door handle and hinge elements available in six colours Electrical Design according to IEC/EN , EN Degree of protection IP30 according to EN Protection class II Rated voltage 400 V AC / 50 Hz Insulation voltage 400 V AC Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the distribution box: 1 row 19 W 2 row 32 W 3 row 41 W 4 row 49 W Steel door superflat SF Mechanical Material: Flush Cover Terminal support Wall box Door/doorframe Designer version ( D, DT ) Colour D Colour DT Sheet ( F, SF ) PS PPO PS PC white transparent-grey steel sheet (phosphatised and powder coated for protection against corrosion) Colour white RAL 9016 Distance between DIN rails 125 mm N-PE terminals: N PE 1 row row row row Device support rail DIN rail 35 x 7.5 mm galvanised steel sheet acc. to IEC/EN The load on the device support rail must not exceed 6 kg per row. Type TE a b KLV-U-1/ KLV-U-2/ KLV-U-3/ KLV-U-4/ Steel door flat F Door designer version D, DT 4

5 Compact Distribution Boxes Surface-Mounted Compact Distribution BC-A-./.. Protection Class II: only in connection with rear wall (BCZ-CS-PF) and cover (KLV-AP-45-W) Enclosure: plastic enclosure with detachable rear wall, white Device support: device support as base element, with detachable support rails; large space behind the device support rails permits efficient working and saving time; line entrance from above, below and from the side Door: Hinged to the left or to the right, white plastic or transparent design Version A Electrical Design according to IEC/EN Degree of protection IP40 (IK07) with Door IP30 (IK07) without Door Protection class 1 without Rear wall 2 with plastic rear wall Rated voltage 400 V AC, 50 Hz Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the distribution box at an ambient temperature of 35 C: 1 row 27 W 2 row 37 W 3 row 47 W 4 row 57 W Mechanical Material: Surface- Cover PS (white RAL 9010) Device support PS Rear wall PS Terminal support PPO Door PC (white RAL 9010) PC (transparent) steel sheet phosphatised and powder-coated, RAL 9016 Distance between DIN rails 125 mm N/PE-terminlas: N PE 1 row 2x25mm 2 +11x16mm 2 2x25mm 2 +11x16mm 2 2 rows 2x25mm 2 +14x16mm 2 2x25mm 2 +14x16mm 2 3 rows 2x25mm 2 +23x16mm 2 2x25mm 2 +23x16mm 2 4 rows 2x25mm 2 +23x16mm 2 2x25mm 2 +23x16mm 2 46 BC-A-./ Type TE a BC-A-1/ BC-A-2/ BC-A-3/ BC-A-4/ a BC-A-./..-TW(TT) 5

6 Compact Distribution Boxes Surface-Mounted Compact Distribution BC-A-./.. Protection Class II: only in connection with rear wall (BCZ-CS-PF) and cover (KLV-AP-45-W) Enclosure: plastic enclosure with detachable rear wall, white Device support: device support as base element, with detachable support rails; large space behind the device support rails permits efficient working and saving time; line entrance from above, below and from the side Door: Hinged to the left or to the right, white plastic or transparent design Version G Electrical Design according to IEC/EN Degree of protection IP40 (IK07) with Door IP30 (IK07) without Door Protection class II with plastic rear wall Rated voltage 400 V AC, 50 Hz Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the distribution box at an ambient temperature of 35 C: 1 row 27 W 2 row 37 W 3 row 47 W 4 row 57 W Mechanical Material: Surface- Cover PS (white RAL 9010) Device support PS Rear wall PS Terminal support PPO Door PC (white RAL 9010) PC (transparent) steel sheet phosphatised and powder-coated, RAL 9016 Distance between DIN rails 125 mm N/PE-terminlas: N PE 1 row 2x25mm 2 +9x16mm 2 2x25mm 2 +13x16mm 2 2 rows (1x25mm 2 +3x16mm 2 )+ (2x25mm 2 +13x16mm 2 ) 2x25mm 2 +13x16mm 2 3 rows (1x25mm 2 +3x16mm 2 )+ (2x25mm 2 +23x16mm 2 ) 2x25mm 2 +23x16mm 2 4 rows (1x25mm 2 +3x16mm 2 )+ (2x25mm 2 +23x16mm 2 ) 2x25mm 2 +23x16mm 2 46 BC-A-./ Type TE a BC-A-1/13-G BC-A-2/26-G BC-A-3/39-G BC-A-4/52-G a BC-A-./..-TW(TT) 6

7 Compact Distribution Boxes Surface-Mounted Compact Distribution BC-A-./..-ROI Protection Class II: only in connection with rear wall (BCZ-CS-PF) and cover (KLV-AP-45-W) Enclosure: plastic enclosure with detachable rear wall, white Device support: device support as base element, with detachable support rails; large space behind the device support rails permits efficient working and saving time; line entrance from above, below and from the side Door: Hinged to the left or to the right, white plastic or transparent design Version ROI Electrical Design according to IEC/EN Degree of protection IP40 (IK07) with Door IP30 (IK07) without Door Protection class II with plastic rear wall Rated voltage 400 V AC, 50 Hz Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the distribution box at an ambient temperature of 35 C: 1 row 27 W 2 row 37 W 3 row 47 W Mechanical Material: Surface- Cover PS (white RAL 9010) Device support PS Rear wall PS Terminal support PPO Door PC (white RAL 9010) PC (transparent) Distance between DIN rails 125 mm N/PE-terminlas: N PE 1 row 2x(2x25mm 2 +9x16mm 2 ) 2x25mm 2 +9x16mm 2 2 rows 2x(2x25mm 2 +9x16mm 2 ) 2x25mm 2 +13x16mm 2 3 rows 2x(2x25mm 2 +9x16mm 2 ) 2x25mm 2 +13x16mm 2 46 BC-A-./ Type TE a BC-A-1/ BC-A-2/ BC-A-3/ a BC-A-./..-TW(TT) 7

8 Compact Distribution Boxes Shower Unit O7-FR...UNIT Version ROI Electrical Design according to IEC/EN Degree of protection IP41 (IK07) according to EN Protection class II Rated voltage 400 V AC / 50 Hz Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the box at the ambient temperature of 35 C and Δt = 20 K: O7-FR...1/18: 13 W O7-FR...1/12: 19 W Mechanical Material: Surface- Enclosure IP41 PS Colour white RAL 9016 Door PC Colour transparent N-PE terminals: N PE O7-FR..1/8 3x10mm 2 +4x16mm 2 3x10mm 2 +4x16mm 2 O7-FR..1/12 3x10mm 2 +3x16mm 2 +2x25mm 2 3x10mm 2 +3x16mm 2 +2x25mm 2 Device support rail DIN rail 35 x 7.5 mm galvanised steel sheet acc. to IEC/EN Type A B C O7-FR..1/ O7-FR..1/ Cable entrance O7-FR..1/8 Top: 1xPG21, 2xPG16 Bottom: 1xPG21, 2xPG16 Left/Right: 2xPG13.5 O7-FR..1/12 Top: 3xPG21, 3xPG16, 2xPG13.5 Bottom: 3xPG21, 3xPG16, 2xPG13.5 Left/Right: 2xPG16 8

9 Compact Distribution Boxes Surface-Mounted Compact Distribution BC-CS-./.. Protection Class II: only in connection with rear wall (BCZ-CS-PF) and cover (KLV-AP-45-W) Enclosure: plastic enclosure with detachable rear wall, white Device support: device support as base element, with detachable support rails; large space behind the device support rails permits efficient working and saving time; line entrance from above, below and from the side Door: Hinged to the left or to the right, white plastic or transparent design Version CS Electrical Design according to IEC/EN Degree of protection IP40 with Door IP30 without Door Protection class I without Rear wall II with plastic rear wall Rated voltage 400 V AC, 50 Hz Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the distribution box at an ambient temperature of 35 C: 1 row 27 W 2 row 37 W 3 row 47 W 4 row 57 W Mechanical Material: Surface- Cover PS (white RAL 9010) Device support PS Rear wall PS Terminal support PPO Door PC (white RAL 9010) PC (transparent) steel sheet phosphatised and powder-coated, RAL 9016 Distance between DIN rails 125 mm L/N/PE-terminlas: L N PE 1 row 2x25mm 2 +9x16mm 2 2 rows 1x25mm 2 +3x16mm 2 1x25mm 2 +3x16mm 2 2x25mm 2 +23x16mm 2 3 rows 1x25mm 2 +3x16mm 2 1x25mm 2 +3x16mm 2 2x25mm 2 +23x16mm 2 4 rows 2x(1x25mm 2 +3x16mm 2 ) 2x(1x25mm 2 +3x16mm 2 ) 2x(2x25mm 2 +23x16mm 2 ) 46 BC-CS-./ Type TE a BC-CS-1/ BC-CS-2/ BC-CS-3/ BC-CS-4/ a 125 BC-CS-./.. with BCZ-CS-PO(PT)-./.. Dimensions accessories (mm) Single-/three-phase board with telereport Type height width depth PA/E PA/E PA/E-3N Platine disjoncteur Type height width depth BCZ-CS-PD Door for single-/three-phase board with telereport Type height width depth PO-PA/E PO-PA/E-3N Door for Platine disjoncteur Type height width depth BCZ-CS-PO-PD

10 Compact Distribution Boxes Surface-Mounted and Flush-Mounted Compact Distribution BC-NK-./.. Enclosure: Sheet steel enclosure with pre-stamped cable entry (RAL 9016) Device Support: Removeable device support with detachable DIN-rails, used as support for terminal support (BCZ-CS-BO..., BCZ-A-KLT); Large space behind the DINrails permits efficient wotking and saving time Door: Sheet steel door with rotary door handle (RAL 9016); Hinged to the left and to the right Flush- Frame: With the steel sheet flush- frame, a surface-mounted distribution board BC-NK-U... also can be used as flush-mounted distribution board Electrical Design according to IEC/EN Degree of protection IP40 with Door Protection class I Rated voltage 400 V AC, 50 Hz Suitable for network structures TN, TT and IT Maximum power loss for all devices integrated in the distribution box at an ambient temperature of 35 C: Surface- BC-NK-U-1/13 24 W BC-NK-U-2/26 31 W BC-NK-U-3/39 39 W BC-NK-U-4/52 47 W Flush- BC-NK-I-1/13 21 W BC-NK-I-2/26 27 W BC-NK-I-3/39 34 W BC-NK-I-4/52 41 W Mechanical Material: Enclosure 0.8 mm steel sheet powder-coated Door 0.8 mm steel sheet powder-coated Flush- frame 0.8 mm steel sheet powder-coated Device support PS Terminal support PPO Colour white RAL 9016 Distance between DIN rails 125 mm N/PE-terminals N PE BC-NK-.-1/13 2x25mm 2 +11x16mm 2 2x25mm 2 +11x16mm 2 BC-NK-.-2/26 2x25mm 2 +23x16mm 2 2x25mm 2 +23x16mm 2 BC-NK-.-3/39 (2x25mm 2 +11x16mm 2 )+(2x25mm 2 +23x16mm 2 ) (2x25mm 2 +11x16mm 2 )+(2x25mm 2 +23x16mm 2 ) BC-NK-.-4/52 2x(2x25mm 2 +23x16mm 2 ) 2x(2x25mm 2 +23x16mm 2 ) Cable entrnce Type below above behind BC-NK-.-1/13 35x180mm oder 7xØ16mm 2xØ26mm + 15xØ16mm 1x35x180mm BC-NK-.-2/26 35x180mm oder 7xØ16mm 2xØ26mm + 15xØ16mm 2x35x180mm BC-NK-.-3/39 35x180mm oder 7xØ16mm 2xØ26mm + 15xØ16mm 3x35x180mm BC-NK-.-4/52 35x180mm oder 7xØ16mm 2xØ26mm + 15xØ16mm 4x35x180mm BC-NK-U-... Type a c d BC-NK-U-1/ BC-NK-U-2/ BC-NK-U-3/ BC-NK-U-4/

11 Compact Distribution Boxes BC-NK-I-... Type a b c d BC-NK-I-1/ BC-NK-I-2/ BC-NK-I-3/ BC-NK-I-4/

12 Compact Distribution Boxes Surface-Mounted Splash-proof Compact Distribution Box FKV-07-FR (-H) sufficient working space for and wiring switchgears sufficient working space behind the DIN rail FKV-07-FR: 10 mm; FKV-07-FR-H: 30 mm distance between DIN rails 150 mm (except FKV-07-FR..-H-2/24: 125 mm) of terminal support above or below (from FKV-07-FR..-H-2/36 also height adjustment possible) impact-resistant, fire-retardant plastic, white pre-moulded PG-bushing on every side Door on the left or right IP41, IP55 and IP65 available Attractive modern design Design A Electrical Design according to IEC/EN Degree of protection IP41 (IK07) according to EN IP55 (IK08) according to EN IP65 (IK09) according to EN Protection class II Rated voltage 400 V AC / 50 Hz Suitable for network structures TN, TT and IT Mechanical Material: Surface- Enclosure IP41 and IP55 PS IP65 PC Colour white Door PC Colour transparent Distance between DIN rails 150 mm 125 mm at Type FKV-O7-FR..-H-2/24 N-PE terminals: N PE FKV-O7-FR..1/4 2x10mm 2 +2x16mm 2 2x10mm 2 +2x16mm 2 FKV-O7-FR..1/8 3x10mm 2 +4x16mm 2 3x10mm 2 +4x16mm 2 FKV-O7-FR..1/12 3x10mm 2 +3x16mm 2 +2x25mm 2 3x10mm 2 +3x16mm 2 +2x25mm 2 FKV-O7-FR..H1/12 3x10mm 2 +5x16mm 2 +2x25mm 2 3x10mm 2 +5x16mm 2 +2x25mm 2 FKV-O7-FR..H1/18 5x10mm 2 +7x16mm 2 +2x25mm 2 5x10mm 2 +7x16mm 2 +2x25mm 2 FKV-O7-FR..H2/24 8x10mm 2 +7x16mm 2 +2x25mm 2 8x10mm 2 +7x16mm 2 +2x25mm 2 FKV-O7-FR..H2/36 10x10mm 2 +8x16mm 2 +4x25mm 2 10x10mm 2 +8x16mm 2 +4x25mm 2 FKV-O7-FR..H3/54 12x10mm 2 +12x16mm 2 +4x25mm 2 12x10mm 2 +12x16mm 2 +4x25mm 2 Device support rail DIN rail 35 x 7.5 mm galvanised steel sheet acc. to IEC/EN Type A B C FKV-O7-FR..1/ FKV-O7-FR..1/ FKV-O7-FR..1/ FKV-O7-FR..H1/ FKV-O7-FR..H1/ FKV-O7-FR..H2/ FKV-O7-FR..H2/ FKV-O7-FR..H3/

13 Compact Distribution Boxes Surface-mounted Moisture-proof Compact Distribution Boxes BC-MP65 Moisture-proof Compact Distribution Box with 3, 5, 9, 12, 24+4, 36+6 and 48+8 module units Impact resistant and plastic free of halogen Each hinged cover is lockable, sealable and removeable Electrical Degree of protection IP55, IP65 Protection class II Rated voltage 400 V AC Maximum power loss for all devices integrated in the distribution box at an ambient temperature of 25 C (single mounted) BC-MP65-1/3 9 W BC-MP65-1/5 14 W BC-MP65-1/9 19 W BC-MP65-1/12 22 W BC-MP65-2/28, BC-MP65-2/14P 46 W BC-MP65-3/42, BC-MP65-3/28P 56 W BC-MP65-4/56 67 W Mechanical Material Polystyrene Burning behavior acc. to EN60695/UL C/HB Max. ambient temperature -25 C to +40 C Color similar to RAL 7035 Distance between DIN-rails 150 mm N-PE-terminals (mm 2) : N PE BC-MP65-1/3 1x16, 3x6 1x16, 3x6 BC-MP65-1/5 2x16, 3x6 1x16, 3x6 BC-MP65-1/9 2x16, 5x6 1x16, 5x6 BC-MP65-1/12 2x16, 10x6 1x16, 10x6 BC-MP65-2/28 1x25, 4x16, 12x6 1x25, 4x16, 12x6 BC-MP65-3/42 1x25, 4x16, 12x6 1x25, 4x16, 12x6 BC-MP65-4/56 1x25, 6x16, 18x6 1x25, 6x16, 18x6 Cable entrance Type above below left right Stepped nipple IP55 (in the scope of supply) BC-MP65-1/3 3xM20 2xM20/M25 2xM20 2xM20 3xM20, 1xM25 BC-MP65-1/5 4xM20, 1xM20/M25 4xM20, 1xM20/M25 2xM20 2xM20 4xM20, 1xM25 BC-MP65-1/9 8xM20, 1xM25/M32 8xM20, 1xM25/M32 2xM20 2xM20 7xM20, 1xM32 BC-MP65-1/12 8xM20, 2xM20/M25, 1xM32/M40 8xM20, 2xM20/M25, 1xM32/M40 2xM20 2xM20 9xM20, 1xM32 BC-MP65-2/28 15xM20, 2xM20/M25, 1xM32/M40 15xM20, 2xM20/M25, 1xM32/M40 12xM20, 3xM25/M32 12xM20, 3xM25/M32 15xM20, 2xM25, 1xM32, 1xM40 BC-MP65-3/42 15xM20, 2xM20/M25, 1xM32/M40 15xM20, 2xM20/M25, 1xM32/M40 16xM20, 4xM25/M32 16xM20, 4xM25/M32 25xM20, 2xM25, 1xM32, 1xM40 BC-MP65-4/56 15xM20, 2xM20/M25, 1xM32/M40 15xM20, 2xM20/M25, 1xM32/M40 20xM20, 5xM25/M32 20xM20, 5xM25/M32 25xM20, 2xM25, 1xM32, 1xM40 BC-MP65-2/14P 15xM20, 2xM20/M25, 1xM32/M40 15xM20, 2xM20/M25, 1xM32/M40 12xM20, 3xM25/M32 12xM20, 3xM25/M32 15xM20, 2xM25, 1xM32, 1xM40 BC-MP65-3/28P 15xM20, 2xM20/M25, 1xM32/M40 15xM20, 2xM20/M25, 1xM32/M40 16xM20, 4xM25/M32 16xM20, 4xM25/M32 15xM20, 2xM25, 1xM32, 1xM40 B H T BC-MP65-1/ BC-MP65-1/ BC-MP65-1/ BC-MP65-1/ BC-MP65-2/ BC-MP65-3/ BC-MP65-4/ BC-MP65-2/14P BC-MP65-3/28P Membrane grommets, metric KT-M.. Cable glands, metric V-M.. Multiple sealing MFD.. a MFD MFD a b c d KT-M KT-M KT-M a b c d e f g V-M M20x V-M M25x V-M M32x V-M M40x Sealing plugs MFV.. a b c MFV MFV

14 Compact Distribution Boxes Outlet Socket Distribution Boxes BC-STV The BC-STV outlet socket distribution boxes are available in 2 different versions. All BC-STV outlet socket distribution boxes are delivered as well completely ready for connection, without feeder line, with an assortment of connection pieces and pull-relieved screw-mounted connection piece (IP68) with counternut as also without switchgear. Made of high-quality glass-fibre reinforced polycarbonate, the distribution boards are highly impact resistant, breakproof and temperature resistant. Hence they are also suitable for outdoor use. Electrical Degree of protection Protection class Rated voltage IP44 II 400 V AC Mechanical Material Polycarbonate (fiber-glass rein forced), free of halogen Burning behavior acc. to EN60695/UL C/V-2 Max. ambient temperature -35 C to +80 C Color similar to RAL 7035 VT09707 VT09907 VT10007 VT10107 BC-STV-40/2+1-L BC-STV-40/4+2-L BC-STV-40/2+1 BC-STV-40/4+2 Design 2 "Schuko"- type 4 "Schuko" -type 2 "Schuko"- type 4 "Schuko" -type earthed sockets earthed sockets earthed sockets earthed sockets + 1 CEE socket + 2 CEE sockets + 1 CEE socket + 2 CEE sockets Rated current 40A 40A RCD 1 x PFIM-40/4/003-XG 1 x PFIM-40/4/003-XG MCB 1 x PLSM-C16/3 1 x PLSM-C25/3 1 x PLSM-C16/1 1 x PLSM-C16/3 2 x PLSM-C16/1 "Schuko"-type earthed sockets 2 x 16A 4 x 16A 2 x 16A 4 x 16A CEE sockets 1 x 16A, 5-pole 1 x 32A, 5-pole 1 x 16A, 5-pole 1 x 32A, 5-pole 1 x 16A, 5-pole 1 x 16A, 5-pole Connection pieces M20, M25, M32 M20, M25, M32, M40 M20, M25, M32 M20, M25, M32, M40 Max. back-up fuse protection 40A 40A Number of poles 4 4 Terminal capacity 1-25mm mm mm mm 2 Cable entrnce Type above/below left/right BC-STV-40/2+1-L 8xM20, 1xM25/32 / 8xM20, 1xM25/32 4xM20/25 / 4xM20/25 BC-STV-40/4+2-L 8xM20, 2xM20/25, 1xM32/40 / 8xM20, 2xM20/25, 1xM32/40 4xM20 / 4xM20 BC-STV-40/2+1 8xM20, 1xM25/32 / 8xM20, 1xM25/32 4xM20/25 / 4xM20/25 BC-STV-40/4+2 8xM20, 2xM20/25, 1xM32/40 / 8xM20, 2xM20/25, 1xM32/40 4xM20 / 4xM20 B H T BC-STV-40/2+1-L BC-STV-40/4+2-L BC-STV-40/ BC-STV-40/

15 Compact Distribution Boxes Membrane grommets, metric KT-M.. Cable glands, metric V-M.. Multiple sealing MFD.. a MFD MFD a b c d KT-M KT-M KT-M a b c d e f g V-M M20x V-M M25x V-M M32x V-M M40x Sealing plugs MFV.. a b c MFV MFV

16 All-Insulated Distribution Box All-Insulated Distribution Box ISV-OPV Enclosure: One-piece enclosure Door can be hinged on the left or right or removed Door can be hinged on the left or right or removed Door gasket inside Standard version with a 3 mm two-way lock Pivoting lever can be retrofitted for profile semi-cylinder Fastened by screwing on the base frame Cover s: Quick acting closures and clips Can be sealed and inserted on both sides Fastened by screwing on the base frame Also available with 45mm cut-out Mounting frame: Easy of devices for modular installation Removable Pre-punched and with reinforced support rail Material: sheet steel, galvanized and passivated Fastening: to the enclosure Fastening brackets: For fastening outside the box Material: sheet steel galvanized and passivated Fastened by screwing on the base frame Air admission tube: To avoid condensation and for good air circulation within the box Material: plastic Fastening: to the enclosure Electrical Design according to EN Degree of protection IP66 according to EN Protection class II Rated voltage 400V~ / 50 Hz Current strength depends on the busbar support system used Mechanical Material hot-pressed, self-extinguishing, halogen-free, glass fibre-reinforced polyester Continuous temperature max. 150 C Colour RAL 7035 Door hinged to the left or right, removable, viewing window optional Use power and control distribution Type A B C ISV-OPV-2 (/S) ISV-OPV-2N (/S) ISV-OPV-3 (/S) ISV-OPV-4 (/S) ISV-OPV-5 (/S)

17 Distribution Boards MCB Distribution Boards B-Type up to 250 A Three Phase with 250 A Busbar General Additional bolt-on spreader boxes/service enclosures, incomer section and metering enclosure Incoming options: 3 or 4 Pole Main switch, 4 Pole RCD or Direct Connections Applicable standard BS EN and 3 / EN Electrical Busbar nominal rating 250A Busbar short circuit withstand 16kA sec. 22kA sec. Rated voltage 415V AC 50/60Hz Maximum incomer rating Internal device - 125A External device - 250A Maximum feeder rating 63A Protection class I Electromagnetic compatibility Enviroment 1 Maximal amount of heat to be dissipated FG-B-04/06 79 W FG-B-08/ W FG-B-18/ W FG-B/ES 47 W FG-B/EX 70 W FG-MS W FG-MS W FG-MS W FG-B/NC W FG-B/NC W FG-B/MB 52 W Mechanical Degree of protection Paint finish Limits of operation Enclosure steel gauge Gland s Gland s knockout FG-B-04/06/08/12/18/24 FG-MS-06 FG-MS-12 FG-MS-19 Maximum cable capacity: Neutral bar 70mm 2 Earth bar 70mm 2 Main earth termination 70mm 2 Incomers and outgoers: IP40 when the door is closed and IP2X when the door is open RAL 7035 textured, epoxy powder coated 40 C ambient 50% RH 1.25mm 1 blank and 1 with knockout 8xØ21mm 8xØ29mm 1xØ41/51mm 4xØ21mm 2xØ26mm 8xØ21mm 4xØ26mm 8xØ21mm 8xØ29mm 1xØ41/51mm RCBO 25mm² RCD 63A: 25mm 2, A: 50mm 2 MCB 25mm 2 Switch disconnectors: LZMB1/PN1 120mm 2 IS.. 50mm 2 Terminals N PE FG-B-04/06 2x(11x25mm 2 ) 2x(13x25mm 2 ) FG-B-08/12 2x(20x25mm 2 ) 2x(22x25mm 2 ) FG-B-18/24 2x(38x25mm 2 ) 2x(40x25mm 2 ) Material: Plastic parts Busbar casing Noryl SE1 Support for inputs Noryl SE1 Cover for inputs Noryl SE1 Cover for neutral wire PVC transparent Hinge roller Polyamide Rotary lever lock Polyamide Metal parts Mounting rail for extension-box Aluminium Console ST 37 1 mm galvanized Casing ST mm Lid ST mm Door ST mm Mounting ST mm Busbar copper E-Cu 58 All screws are galvanized and passivated Environmental conditions: Ambient temperature -5 to +40 C Average ambient temperature over 24 hours 35 C Relative air humidity 50% at 40 C 17

18 Distribution Boards FG-B-04/06 FG-B-08/12 FG-B-18/24 Dimensions Accessories (mm) Spreader Box FG-B/ES Spreader Box FG-B/EX Incomer Enclosure FG-B/INC-160/FG-B/INC-250 Modular Service Box FG-MS-06 Modular Service Box FG-MS-12 Modular Service Box FG-MS-19 18

19 Distribution Boards Dimensions Accessories (mm) Energy Metering Section Enclosure FG-B/MB Cable Incomer connection cable L 1 L 2 L 3 Cable capacity FG-B/INC-160 FG-B/INC mm 2 FG-B/INC mm 2 FG-B/INC-250 Single metering section cable L 1 L 2 L 3 N Cable capacity FG-B/MBCS-160 FG-B/MBCS mm 2 FG-B/MBCS mm 2 FG-B/MBCS-250 Split metering section cable L 1 L 2 L 3 N Cable capacity FG-B/MBSCS-160 FG-B/MBSCS / / / / mm 2 FG-B/MBSCS / / / / mm 2 FG-B/MBSCS

20 Distribution Boards Mini Panel Boards up to 400 A Three Phase with 400 A Busbar General Additional bolt-on spreader boxes/service enclosures, incomer section and metering enclosure Incoming options: 3- and 4-pole MCCB, 3- and 4-pole Switch Disconnector, Direct Connections Applicable standard BS EN and 3 / EN Electrical Busbar nominal rating 400A Busbar short circuit withstand 25kA... 1 sec. 40kA sec. Rated voltage 415V AC 50/60Hz Maximum incomer rating 400A Protection class I Electromagnetic compatibility Enviroment 1 Maximal amount of heat to be dissipated FG-LH W FG-LH W FG-LH W FG-LH W FG-LH/EX 82 W FG-LH/MS W FG-LH/MB 82 W Mechanical Degree of protection Paint finish IP40 when the door is closed and IP2X when the door is open RAL 7035 textured, epoxy powder coated 40 C ambient 50% RH 1.25mm 1 blank and 1 with knockout Limits of operation Enclosure steel gauge Gland s Gland s knockout FG-LH-04/08/12/16 8xØ21mm 12xØ26mm1xØ41/51mm FG-LH/MS-30 8xØ21mm 12xØ26mm1xØ41/51mm Maximum cable capacity: Main Earth termination 150mm 2 Main Neutral termination 150mm 2 Terminals N PE FG-LH-04/06 2x(19x25mm 2 ) 2x(22x25mm 2 ) FG-LH-12/16 2x(37x25mm 2 ) 2x(40x25mm 2 ) Material: Plastic parts Busbar casing Noryl SE1 Support for inputs Noryl SE1 Cover for neutral wire PVC transparent Hinge roller Polyamide Rotary lever lock Polyamide Metal parts Mounting rail for extension-box Aluminium Console ST mm galvanized Casing ST mm Lid ST mm Door ST mm Mounting ST mm galvanized Busbar copper E-Cu 58 All screws are galvanized and passivated Environmental conditions: Ambient temperature -5 to +40 C Average ambient temperature over 24 hours 35 C Relative air humidity 50% at 40 C 20

21 Distribution Boards FG-LH-04/08 FG-LH-12/16 Dimensions Accessories (mm) FG-LH/MB FG-LH/EX FG-LH/MS-30 21

22 Flat Distribution Boards xboard BF-...-A Flat installation distribution board for surface- and flush- 2-to 6-rows with 24 MU per row 4-to 6-rows with 33 MU per row Enclosure: Closed Construction including rear wall Rear wall useable as area Two cable entry flanges at Flat Distribution Board with 24 MU width at the top Three cable entry flanges at Flat Distribution Board with 33 MU width at the top Pre stamped cable entry openings at the bottom Terminals pre mounted at the enclosure (no losing of Module Units) Wall Box: Wall Box with door frame Rear wall useable as area Easy removeable knock-outs 127mm depth Terminals pre mounted at the enclosure (no losing of Module Units) 4 lateral straps Version A DIN-Rail Frame: Removable DIN-Rail Frame For 45mm Switchgears 150 mm distance between DIN-Rails MOELLER MCCB integrate able by set (BFZ-NZM1-SET(/33)) Universal set for surface mounted enclosure (BFZ-O-ITMPL..), (BFZ-U-MPL..) for flush mounted enclosure Front : Contacting of the metal front by special catch on enclosure Door: door with rotary door handle white in the scope of delivery door with additional depth (required to install RMQ- Components at the door) is available as accessory (BFZ-OTR-./...) door with window is available as accessory (BFZ-OTT-./...) Electrical Design according to EN ,-3 EN Degree of protection IP30 according to EN Protection class I Rated voltage AC 240/415V; 50/60 Hz Rated isolation voltage AC 415V Rated current max. 125/160 A (according to Incoming switch) Max. power loss for all devices integrated in the flat distribution board at an ambient temperature of 35 C: BF-O-2/48 74 W BF-O-3/72 88 W BF-O-4/ W BF-O-4/ W BF-O-5/ W BF-O-5/ W BF-O-6/ W BF-O-6/ W BF-U-2/48 67 W BF-U-3/72 81 W BF-U-4/96 94 W BF-U-4/ W BF-U-5/ W BF-U-5/ W BF-U-6/ W BF-U-6/ W Mechanical Variationen Flush- and surface-mounted Enclosure Door Front s DIN-Rail frame galvanised Terminal support PPO Colour white RAL 9016 Distance between DIN-Rails 150mm N/PE terminals max. 63 A N PE BF-O/U-2/48 2x25mm 2 +9x16mm 2 2x25mm 2 +27x16mm 2 BF-O/U-3/72 2x25mm 2 +9x16mm 2 2x25mm 2 +27x16mm 2 BF-O/U-4/96 2x25mm 2 +9x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-4/132 2x25mm 2 +9x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-5/120 2x25mm 2 +9x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-5/165 2x25mm 2 +9x16mm 2 2x25mm 2 +74x16mm 2 BF-O/U-6/144 2x25mm 2 +9x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-6/198 2x25mm 2 +9x16mm 2 2x25mm 2 +74x16mm 2 Cable entries above Surface- 24MU per row 33MU per row 2x Flange: 14x ø11mm 3x Flange: 14x ø11mm 8x ø15mm 8x ø15mm 2x ø28mm 2x ø28mm Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 Flush- 24MU per row 33MU per row Relief stamp: 4x (88x46mm) Relief stamp: 5x (88x46mm) Cable entries below Surface- 24MU per row 33MU per row Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 6x M25 12x M25 8x M20 8x M20 Flush- 24MU per row 33MU per row Relief stamp: 4x (88x46mm) Relief stamp: 5x (88x46mm) 22

23 Version A Surface- with 24MU per row H , with NZM1- with universal 543 Type H BF-O-2/48-A 450 BF-O-3/72-A 600 BF-O-4/96-A 750 BF-O-5/120-A 900 BF-O-6/144-A 1050 Surface- with 33MU per row H , with NZM1- with universal 705 Type H BF-O-4/132-A 750 BF-O-5/165-A 900 BF-O-6/198-A

24 Version A Flush- with 24MU per row with NZM1- with universal Type H H1 BF-U-2/48-A BF-U-3/72-A BF-U-4/96-A BF-U-5/120-A BF-U-6/144-A Flush- with 33MU per row with NZM1- with universal Type H H1 BF-U-4/132-A BF-U-5/165-A BF-U-6/198-A

25 Allocation of front (Delivery status) 24MU per row BF-O-2/48-A BF-O-3/72-A BF-O-4/96-A BF-O-5/120-A BF-O-6/144-A BF-U-2/48-A BF-U-3/72-A BF-U-4/96-A BF-U-5/120-A BF-U-6/144-A 33MU per row Version A BF-O-4/132-A BF-O-5/165-A BF-O-6/198-A BF-U-4/132-A BF-U-5/165-A BF-U-6/198-A

26 Flat Distribution Boards xboard BF-...-BNL Flat installation distribution board for surface- 2-to 6-rows with 24 MU per row 4-to 6-rows with 33 MU per row Enclosure: Closed Construction including rear wall Rear wall useable as area Two cable entry flanges at Flat Distribution Board with 24 MU width at the top Three cable entry flanges at Flat Distribution Board with 33 MU width at the top Pre stamped cable entry openings at the bottom Terminals pre mounted at the enclosure (no losing of Module Units) Door: door with rotary door handle white in the scope of delivery door with additional depth (required to install RMQ- Components at the door) is available as accessory (BFZ-OTR-./...) door with window is available as accessory (BFZ-OTT-./...) Version BNL DIN-Rail Frame: Removable DIN-Rail Frame For 45mm Switchgears 150 mm distance between DIN-Rails MOELLER MCCB integrate able by set (BFZ-NZM1-SET(/33)) Universal set for surface mounted enclosure (BFZ-O-ITMPL..) Front : Contacting of the metal front by special catch on enclosure Electrical Design according to EN ,-3 EN Degree of protection IP30 according to EN Protection class I Rated voltage AC 240/415V; 50/60 Hz Rated isolation voltage AC 415V Rated current max. 125/160 A (according to Incoming switch) Max. power loss for all devices integrated in the flat distribution board at an ambient temperature of 35 C: BF-O-2/48 74 W BF-O-3/72 88 W BF-O-4/ W BF-O-4/ W BF-O-5/ W BF-O-5/ W BF-O-6/ W BF-O-6/ W Mechanical Variationen Aufputz Enclosure Door Front s DIN-Rail frame galvanised Terminal support PPO Colour white RAL 9016 Distance between DIN-Rails 150mm N/PE terminals max. 63 A N PE BF-O-2/48 2x25mm 2 +9x16mm 2 2x25mm 2 +27x16mm 2 BF-O-3/72 2x25mm 2 +9x16mm 2 2x25mm 2 +27x16mm 2 BF-O-4/96 2x25mm 2 +9x16mm 2 2x25mm 2 +43x16mm 2 BF-O-4/132 2x25mm 2 +9x16mm 2 2x25mm 2 +58x16mm 2 BF-O-5/120 2x25mm 2 +9x16mm 2 2x25mm 2 +58x16mm 2 BF-O-5/165 2x25mm 2 +9x16mm 2 2x25mm 2 +74x16mm 2 BF-O-6/144 2x25mm 2 +9x16mm 2 2x25mm 2 +58x16mm 2 BF-O-6/198 2x25mm 2 +9x16mm 2 2x25mm 2 +74x16mm 2 Cable entries above Surface- 24MU per row 33MU per row 2x Flange: 14x ø11mm 3x Flange: 14x ø11mm 8x ø15mm 8x ø15mm 2x ø28mm 2x ø28mm Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 Cable entries below Surface- 24MU per row 33MU per row Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 6x M25 12x M25 8x M20 8x M20 26

27 Version BNL Surface- with 24MU per row H , with NZM1- with universal 543 Type H BF-O-2/48-BNL 450 BF-O-3/72-BNL 600 BF-O-4/96-BNL 750 BF-O-5/120-BNL 900 BF-O-6/144-BNL 1050 Surface- with 33MU per row H , with NZM1- with universal 705 Type H BF-O-4/132-BNL 750 BF-O-5/165-BNL 900 BF-O-6/198-BNL

28 Allocation of front (Delivery status) Version BNL 24MU per row 33MU per row BF-O-2/48-BNL BF-O-3/72-BNL BF-O-4/96-BNL BF-O-5/120-BNL BF-O-6/144-BNL BF-O-4/132-BNL BF-O-5/165-BNL BF-O-6/198-BNL

29 Flat Distribution Boards xboard BF-...-E Flat installation distribution board for surface- and flush- 2-to 6-rows with 24 MU per row Version E Enclosure: Closed Construction including rear wall Rear wall useable as area Two cable entry flanges at Flat Distribution Board with 24 MU width at the top Pre stamped cable entry openings at the bottom Terminals pre mounted at the enclosure (no losing of Module Units) Wall Box: Wall Box with door frame Rear wall useable as area Easy removeable knock-outs 127mm depth Terminals pre mounted at the enclosure (no losing of Module Units) 4 lateral straps DIN-Rail Frame: Removable DIN-Rail Frame For 45mm Switchgears 150 mm distance between DIN-Rails MOELLER MCCB integrate able by set (BFZ-NZM1-SET(/33)) Universal set for surface mounted enclosure (BFZ-O-ITMPL..), (BFZ-U-MPL..) for flush mounted enclosure Front : Contacting of the metal front by special catch on enclosure Door: door with rotary door handle white in the scope of delivery door with additional depth (required to install RMQ- Components at the door) is available as accessory (BFZ-OTR-./...) door with window is available as accessory (BFZ-OTT-OR./...) Electrical Design according to EN ,-3 EN Degree of protection IP30 according to EN Protection class I Rated voltage AC 240/415V; 50/60 Hz Rated isolation voltage AC 415V Rated current max. 125/160 A (according to Incoming switch) Max. power loss for all devices integrated in the flat distribution board at an ambient temperature of 35 C: BF-O-2/48 74 W BF-O-3/72 88 W BF-O-4/ W BF-O-5/ W BF-O-6/ W BF-U-2/48 67 W BF-U-3/72 81 W BF-U-4/96 94 W BF-U-5/ W BF-U-6/ W Mechanical Variationen Flush- and surface-mounted Enclosure Door Front s DIN-Rail frame galvanised Terminal support PPO Colour white RAL 9016 Distance between DIN-Rails 150mm N/PE terminals max. 63 A N PE BF-O/U-2/48 2x25mm 2 +13x16mm 2 2x25mm 2 +13x16mm 2 BF-O/U-3/72 2x25mm 2 +13x16mm 2 2x25mm 2 +13x16mm 2 BF-O/U-4/96 2x25mm 2 +27x16mm 2 2x25mm 2 +27x16mm 2 BF-O/U-5/120 2x25mm 2 +27x16mm 2 2x25mm 2 +27x16mm 2 BF-O/U-6/144 2x25mm 2 +27x16mm 2 2x25mm 2 +27x16mm 2 Cable entries above Surface- Flush- Cable entries below Surface- Flush- 24MU per row 2x Flange: Relief stamp: 24MU per row Relief stamp: 24MU per row Relief stamp: 24MU per row Relief stamp: 14x ø11mm 8x ø15mm 2x ø28mm 2x M32/M40 4x (88x46mm) 2x M32/M40 6x M25 8x M20 4x (88x46mm) 29

30 Version E Surface- with 24MU per row 18 H , with NZM1- with universal 543 Type H BF-O-2/48-E 450 BF-O-3/72-E 600 BF-O-4/96-E 750 BF-O-5/120-E 900 BF-O-6/144-E 1050 Flush- with 24MU per row with NZM1- with universal Type H H1 BF-U-2/48-E BF-U-3/72-E BF-U-4/96-E BF-U-5/120-E BF-U-6/144-E

31 Allocation of front (Delivery status) 24MU per row BF-O-2/48-E BF-O-3/72-E BF-O-4/96-E BF-O-5/120-E BF-O-6/144-E BF-U-2/48-E BF-U-3/72-E BF-U-4/96-E BF-U-5/120-E BF-U-6/144-E Version E

32 Flat Distribution Boards xboard BF-...-C Flat installation distribution board for surface- and flush- 2- to 6-rows with 24 MU per row 4- to 6-rows with 33 MU per row Enclosure: Closed Construction including rear wall Rear wall useable as area Two cable entry flanges at Flat Distribution Board with 24 MU width at the top Pre stamped cable entry openings at the bottom Terminals pre mounted at the enclosure (no losing of Module Units) Wall Box: Wall Box with door frame Rear wall useable as area Easy removeable knock-outs 127mm depth Terminals pre mounted at the enclosure (no losing of Module Units) 4 lateral straps Version C DIN-Rail Frame: Removable DIN-Rail Frame For 45mm Switchgears 150 mm distance between DIN-Rails MOELLER MCCB integrate able by set (BFZ-NZM1-SET(/33)) Universal set for surface mounted enclosure (BFZ-O-ITMPL..), (BFZ-U-MPL..) for flush mounted enclosure Front : Contacting of the metal front by special catch on enclosure Door: door with rotary door handle white and gray in the scope of delivery door with window white and grey in the scope of delivery door with additional depth (required to install RMQ- Components at the door) is available as accessory (BFZ-OTR-./...) Electrical Design according to EN ,-3 EN Degree of protection IP30 according to EN Protection class I Rated voltage AC 240/415V; 50/60 Hz Rated isolation voltage AC 415V Rated current max. 125/160 A (according to Incoming switch) Max. power loss for all devices integrated in the flat distribution board at an ambient temperature of 35 C: BF-O(T)-2/48 74 W BF-O(T)-3/72 88 W BF-O(T)-4/ W BF-O(T)-4/ W BF-O(T)-5/ W BF-O(T)-5/ W BF-O(T)-6/ W BF-O(T)-6/ W BF-U(T)-2/48 67 W BF-U(T)-3/72 81 W BF-U(T)-4/96 94 W BF-U(T)-4/ W BF-U(T)-5/ W BF-U(T)-5/ W BF-U(T)-6/ W BF-U(T)-6/ W Mechanical Variationen Flush- and surface-mounted Enclosure Door Front s DIN-Rail frame galvanised Terminal support PPO Colour white RAL 9016 gray RAL 7035 Distance between DIN-Rails 150mm N/PE terminals max. 63 A N PE BF-O/U-2/48 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-3/72 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-4/96 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-4/132 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-5/120 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-5/165 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-6/144 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-6/198 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 Cable entries above Surface- 24MU per row 33MU per row 2x Flange: 14x ø11mm 3x Flange: 14x ø11mm 8x ø15mm 8x ø15mm 2x ø28mm 2x ø28mm Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 Flush- 24MU per row 33MU per row Relief stamp: 4x (88x46mm) Relief stamp: 5x (88x46mm) Cable entries below Surface- 24MU per row 33MU per row Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 6x M25 12x M25 8x M20 8x M20 Flush- 24MU per row 33MU per row Relief stamp: 4x (88x46mm) Relief stamp: 5x (88x46mm) 32

33 Version C Surface- with 24MU per row H , with NZM1- with universal 543 Type H BF-O-2/48(-G)-C 450 BF-O-3/72(-G)-C 600 BF-O-4/96(-G)-C 750 BF-O-5/120(-G)-C 900 BF-O-6/144(-G)-C 1050 Surface- with 33MU per row H , with NZM1- with universal 705 Type H BF-O-4/132(-G)-C 750 BF-O-5/165(-G)-C 900 BF-O-6/198(-G)-C

34 Version C Flush- with 24MU per row with NZM1- with universal Type H H1 BF-U-2/48(-G)-C BF-U-3/72(-G)-C BF-U-4/96(-G)-C BF-U-5/120(-G)-C BF-U-6/144(-G)-C Flush- with 33MU per row with NZM1- with universal Type H H1 BF-U-4/132(-G)-C BF-U-5/165(-G)-C BF-U-6/198(-G)-C

35 Allocation of front (Delivery status) 24MU per row 33MU per row Version C 35

36 Flat Distribution Boards xboard BF-...-UK Flat installation distribution board for surface- and flush- 2- to 6-rows with 24 MU per row 4- to 6-rows with 33 MU per row Enclosure: Closed Construction including rear wall Rear wall useable as area Two blind flanges at Flat Distribution Board with 24 MU width at the top Three blind flanges at Flat Distribution Board with 33 MU width at the top Pre stamped cable entry openings at the bottom Terminals pre mounted at the enclosure (no losing of Module Units) Wall Box: Wall Box with door frame Rear wall useable as area Easy removeable knock-outs 127mm depth Terminals pre mounted at the enclosure (no losing of Module Units) 4 lateral straps Version UK DIN-Rail Frame: Removable DIN-Rail Frame For 45mm Switchgears 150 mm distance between DIN-Rails MOELLER MCCB integrate able by set (BFZ-NZM1-SET(/33)) Universal set for surface mounted enclosure (BFZ-O-ITMPL..), (BFZ-U-MPL..) for flush mounted enclosure Front : Contacting of the metal front by special catch on enclosure Door: door with rotary door handle white and gray in the scope of delivery door with window white and grey in the scope of delivery door with additional depth (required to install RMQ- Components at the door) is available as accessory (BFZ-OTR-./...) Electrical Design according to EN ,-3 EN Degree of protection IP30 according to EN Protection class I Rated voltage AC 240/415V; 50/60 Hz Rated isolation voltage AC 415V Rated current max. 125/160 A (according to Incoming switch) Max. power loss for all devices integrated in the flat distribution board at an ambient temperature of 35 C: BF-O(T)-2/48 74 W BF-O(T)-3/72 88 W BF-O(T)-4/ W BF-O(T)-4/ W BF-O(T)-5/ W BF-O(T)-5/ W BF-O(T)-6/ W BF-O(T)-6/ W BF-U(T)-2/48 67 W BF-U(T)-3/72 81 W BF-U(T)-4/96 94 W BF-U(T)-4/ W BF-U(T)-5/ W BF-U(T)-5/ W BF-U(T)-6/ W BF-U(T)-6/ W Mechanical Variationen Flush- and surface-mounted Enclosure Door Front s DIN-Rail frame galvanised Terminal support PPO Colour white RAL 9016 gray RAL 7035 Distance between DIN-Rails 150mm N/PE terminals max. 63 A N PE BF-O/U-2/48 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-3/72 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-4/96 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-4/132 2x25mm 2 +74x16mm 2 2x25mm 2 +74x16mm 2 BF-O/U-5/120 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-5/165 2x25mm 2 +74x16mm 2 2x25mm 2 +74x16mm 2 BF-O/U-6/144 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-6/198 2x25mm 2 +74x16mm 2 2x25mm 2 +74x16mm 2 Cable entries above Surface- 24MU per row 33MU per row Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 Flush- 24MU per row 33MU per row Relief stamp: 4x (88x46mm) Relief stamp: 5x (88x46mm) Cable entries below Surface- 24MU per row 33MU per row Relief stamp: 2x M32/M40 Relief stamp: 1x M32/M40 6x M25 12x M25 8x M20 8x M20 Flush- 24MU per row 33MU per row Relief stamp: 4x (88x46mm) Relief stamp: 5x (88x46mm) 36

37 Version UK Surface- with 24MU per row with universal Type H BF-O-2/48(-G)-UK 450 BF-O-3/72(-G)-UK 600 BF-O-4/96(-G)-UK 750 BF-O-5/120(-G)-UK 900 BF-O-6/144(-G)-UK 1050 Surface- with 33MU per row with NZM1- with universal Type H BF-O-4/132(-G)-UK 750 BF-O-5/165(-G)-UK 900 BF-O-6/198(-G)-UK

38 Version UK Flush- with 24MU per row with NZM1- with universal Type H H1 BF-U-2/48(-G)-UK BF-U-3/72(-G)-UK BF-U-4/96(-G)-UK BF-U-5/120(-G)-UK BF-U-6/144(-G)-UK Flush- with 33MU per row with NZM1- with universal Type H H1 BF-U-4/132(-G)-UK BF-U-5/165(-G)-UK BF-U-6/198(-G)-UK

39 Allocation of front (Delivery status) 24MU per row 33MU per row Version UK 39

40 Flat Distribution Boards xboard BF-...-F Flat installation distribution board for surface- 2-to 6-rows with 24 MU per row Version F Enclosure: Closed Construction including rear wall Rear wall useable as area Two cable entry flanges at Flat Distribution Board with 24 MU width at the bottom Pre stamped cable entry openings at the bottom Terminals pre mounted at the enclosure (no losing of Module Units) Door: door with rotary door handle white is available as accessory (BFZ-OTS-./...) door with additional depth (required to install RMQ- Components at the door) is available as accessory (BFZ-OTR-./...) door with window is available as accessory (BFZ-OTT-./...) DIN-Rail Frame: Removable DIN-Rail Frame For 45mm Switchgears 150 mm distance between DIN-Rails MOELLER MCCB integrate able by set (BFZ-NZM1-SET(/33)) Universal set for surface mounted enclosure (BFZ-O-ITMPL..) Platine d abbonné mittels Einbauset (BFZ-KDA) integrierbar Front : Contacting of the metal front by special catch on enclosure Electrical Design according to EN ,-3 EN Degree of protection IP30 according to EN Protection class I Rated voltage AC 240/415V; 50/60 Hz Rated isolation voltage AC 415V Rated current max. 125/160 A (according to Incoming switch) Max. power loss for all devices integrated in the flat distribution board at an ambient temperature of 35 C: BF-O-2/48 74 W BF-O-3/72 88 W BF-O-4/ W BF-O-5/ W BF-O-6/ W Mechanical Variationen Aufputz Enclosure Door Front s DIN-Rail frame galvanised Terminal support PPO Colour white RAL 9016 Distance between DIN-Rails 150mm PE terminals PE BF-O/-2/48 2x25mm 2 +27x16mm 2 BF-O/-3/72 2x25mm 2 +27x16mm 2 BF-O/-4/96 2x25mm 2 +43x16mm 2 BF-O/-5/120 2x25mm 2 +58x16mm 2 BF-O/-6/144 2x25mm 2 +58x16mm 2 Cable entries above Surface- Cable entries below Surface- 24MU per row Relief stamp: 24MU per row 2x Flange: Relief stamp: 2x M32/M40 6x M25 8x M20 14x ø11mm 8x ø15mm 2x ø28mm 2x M32/M40 40

41 Version F Surface- with 24MU per row H ,5 Type H BF-O-2/48-F 450 BF-O-3/72-F 600 BF-O-4/96-F 750 BF-O-5/120-F 900 BF-O-6/144-F with NZM1- with universal Allocation of front (Delivery status) Version F 24MU per row BF-O-2/48-F BF-O-3/72-F BF-O-4/96-F BF-O-5/120-F BF-O-6/144-F

42 Flat Distribution Boards xboard BF-...-P Flat installation distribution board for surface- and flush- 3- to 6-rows with 24 MU per rows Version P Enclosure: Closed Construction including rear wall Rear wall useable as area Two cable entry flanges at Flat Distribution Board with 24 MU width at the top Pre stamped cable entry openings at the bottom Terminals pre mounted at the enclosure (no losing of Module Units) Wall Box: Wall Box with door frame Rear wall useable as area Easy removeable knock-outs 127mm depth Terminals pre mounted at the enclosure (no losing of Module Units) 4 lateral straps DIN-Rail Frame: Removable DIN-Rail Frame For 45mm Switchgears 150 mm distance between DIN-Rails MOELLER MCCB integrate able by set (BFZ-NZM1-SET(/33)) Universal set for surface mounted enclosure (BFZ-O-ITMPL..), (BFZ-U-MPL..) for flush mounted enclosure Front : Contacting of the metal front by special catch on enclosure Door: door with rotary door handle white or steel sheet door with window and rotary door handle white in the scope of delivery door with additional depth (required to install RMQ- Components at the door) is available as accessory (BFZ-OTR-./...) Electrical Design according to EN ,-3 EN Degree of protection IP30 according to EN Protection class I Rated voltage AC 240/415V; 50/60 Hz Rated isolation voltage AC 415V Rated current max. 125/160 A (according to Incoming switch) Max. power loss for all devices integrated in the flat distribution board at an ambient temperature of 35 C: BF-O-3/72 88 W BF-O-4/ W BF-O-5/ W BF-O-6/ W BF-U-3/72 81 W BF-U-4/96 94 W BF-U-5/ W BF-U-6/ W Mechanical Variationen Flush- and surface-mounted Enclosure Door Front s DIN-Rail frame galvanised Terminal support PPO Colour white RAL 9016 Distance between DIN-Rails 150mm N/PE terminals max. 63 A N PE BF-O/U-3/72 2x25mm 2 +43x16mm 2 2x25mm 2 +43x16mm 2 BF-O/U-4/96 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-5/120 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 BF-O/U-6/144 2x25mm 2 +58x16mm 2 2x25mm 2 +58x16mm 2 Cable entries above Surface- Flush- Cable entries below Surface- Flush- 24MU per row 2x Flange: Relief stamp: 24MU per row Relief stamp: 24MU per row Relief stamp: 24MU per row Relief stamp: 14x ø11mm 8x ø15mm 2x ø28mm 2x M32/M40 4x (88x46mm) 2x M32/M40 6x M25 8x M20 4x (88x46mm) 42