PROFESSIONAL Van Racking

Size: px

Start display at page:

Download "PROFESSIONAL Van Racking"

Evangeline Norton
5 years ago
Views:

1 PROFESSIONAL Van Racking

2 Creates Mobile Workplaces See our full product range:

Shelf frames 300 31 505 1,6 2000 300 31 670 2,0 2002 300 31 890 2,5 2004

31 1220 3,5 2008 300 31 1440 4,3 2010 2005 & 2007 470 31 505 470 31 670

2014 2,6 2016 2,8 2018 3,0 2020 3,9 2022 4,7 2024 Shelf frames for false

360 470 31 190 1,8 2072 1,4 2073 Shelf frame extensions Depth Width Height

No 300 31 185 160 300 31 230 160 300 31 290 160 300 31 400 160 470 31 185

2054 1,5 2056 1,3 2058 1,4 2060 1,6 2062 1,8 2064 Shelf frame extensions

the curvature of the van. Shelf frame support leg Height Kg Part.

3 Shelf frames , , , /890 2, , /1000 3, , , & , , , , , , , Shelf frames for false floor and sliding shelves , , , , Shelf frame extensions Depth Width Height Depth top Kg Part.No , , , , , , , , Shelf frame extensions are used for fitting additional shelving to the top of a rack allowing for the curvature of the van. Shelf frame support leg Height Kg Part.No 500 0, Shelf frame support legs can be fitted to allow for fitting at uneven parts of the van; over the wheel arch for example. Adjustable 10 to 400 mm. 1

Drawers 300 302 110 3,4 2331 300 302 220

5,4 2342 300 392 165 4,6 2343 300 605 110

5,7 2371 300 784 220 7,2 2372 Payload 40

110 470 784 220 4,7 2431 6,5 2432 5,2 2441

470 302 1 470 392 1 470 605 1 1,1 2543 1,5

3 2,3 2546 Support plinths 300 302 55 0,7

2636 470 302 55 470 392 55 470 392 120 470

4 Drawers , , , , , , , , , Payload 40 kg uniformly distributed load , , , , , , , , , Top plates , , , , , , Support plinths , , , , , , , Drawer system Four widths Two depths & three heights 2

Sliding shelves Depth Width Height Goes with Kg Part.

1898 268 1218 110 1176 mm 10,1 1883 268 1218 165 1176 mm 10,9 1899 438 826 110 784 mm 438 826 165 784 mm 438 826

438 1218 165 1176 mm 438 1218 220 1176 mm 438 1218 360 1176 mm 8,9 1884 9,9 1885 12,7 1894 10,6 1886 11,7 1887

Height Information Kg Part.No - - Brackets, per pair 436 62 436 114 2736 fits 1884-1891.

0,0 2753 0,4 2736 0,6 2738 Drawer inserts 300 127 70 0,2 3001 300 172 70 0,3 3003 470 127 70 470 172 70 0,4 3005

Fitting guide Drawer width Inserts Drawer Inserts 302 mm 127 mm, 2 pcs 605 mm 127 mm, 3 pcs + 172 mm 1 pcs 392 mm

5 Sliding shelves Depth Width Height Goes with Kg Part.No mm 7, mm 8, mm 8, mm 9, mm 10, mm 10, mm mm mm mm mm mm mm mm mm mm mm 8, , , , , , , , , , , / 2738 Dividers to sliding shelves Depth Height Information Kg Part.No - - Brackets, per pair fits fits 1885, 1887, 1888, 1890 & , , , Drawer inserts , , , , Drawer inserts, supplied with dividers. Fitting guide Drawer width Inserts Drawer Inserts 302 mm 127 mm, 2 pcs 605 mm 127 mm, 3 pcs mm 1 pcs 392 mm 172 mm, 2 pcs 784 mm 127 mm, 3 pcs mm, 2 pcs Drawer foam inserts Fits in Thickness Kg Part.No 2331 & , , 2342 & , & , & , & , 2442 & & & , , , , Benefit from a quieter life by using lining foam in the drawers. 3

6606 2,7 1606 300 784 6608 3,0 1608 300 907 6610 3,5 1610 300 997 6612 3,7 1612

6620 4,8 1620 300 1389 6622 5,0 1622 300 1512 6624 5,4 1624 300 1568 6626 5,6

300-1600 mm 70 kg. Shelf length 1601-1960 mm 50 kg.

392 6702 470 605 6704 470 694 6706 470 784 6708 470 907 6710 470 997 6712 470

470 1568 6726 470 1960 6799 (rm) 160 997 6802 160 1176 6804 160 1568 6806 160

4,2 1708 4,8 1710 5,2 1712 5,6 1714 6,1 1716 6,1 1718 6,5 1720 6,9 1722 7,5

6 Shelves Depth Width Rubber mat Kg Part.No , , , , , , , , , , , , , , , Payload, uniformly distributed load: Shelf length mm 70 kg. Shelf length mm 50 kg. Adjustable shelves 30 kg All standard shelves are 65mm deep (rm) (rm) (rm) 2, , , , , , , , , , , , , , , , , , , , Shelf joint Depth Kg Part.No 300 1, Although we have shelves in many different lengths, sometimes you need another size. With the shelf joint you can easily connect two shelves to the length you desire. (Only 300 mm deep shelves) /2756 Shelf dividers Depth Height Information Kg Part.No Brackets, per pair 0, , , Flipfront Depth Kg Part.No 160 0, ,

Dropfront shelves Depth Width Rubber mat Kg Part.

3,5 3610 300 997 6612 4,0 3612 300 1176 6616 4,5 3616

470 605 6704 470 784 6708 470 907 6710 470 997 6712 470

shelves are supplied with M6 screws and nuts to attach to

Drop fronts 38 605 110 0,9 3804 38 605 220 1,5 3805 38 784

220 2,0 3811 38 997 110 1,4 3812 38 997 220 2,3 3813 38

heights, supplied with brackets to fix to the shelf.

No 300 110 0,3 1990 300 220 0,5 1992 470 110 470 220 0,4

7 Dropfront shelves Depth Width Rubber mat Kg Part.No , , , , , Payload 70 kg uniformly distributed load , , , , , The shelves are supplied with M6 screws and nuts to attach to the shelf frame. Drop fronts , , , , , , , , , , The drop fronts in 2 heights, supplied with brackets to fix to the shelf. Dividers to dropfront shelves Depth Height Kg Part.No , , , , Shelf for cable reels , Extra divider 100 0, One movable divider is included. Payload 30 kg uniformly distributed load. 5

2122 3,1 2124 3,5 2126 4,2 2128 5,0 2130 All of our pegboards are made with square holes, 10x10 mm and 37 mm c / c Pegboards flanged edge Width Thickness Height Kg Part.

8 Pegboards plain sheet Width Thickness Height Kg Part.No , , , , , , , , , , , , All of our pegboards are made with square holes, 10x10 mm and 37 mm c / c Pegboards flanged edge Width Thickness Height Kg Part.No , , , , , , , , , , , All of our pegboards are made with square holes, 10x10 mm and 37 mm c / c Spacer for mounting flanged edge pegboard 3031 Louvre panel Depth Length Height Kg Part.No ,0 T ,0 T ,5 T7803 The louvre panel is extendable in two directions. Payload 125 kg. Total height is set with the legs and upper brackets to suit the vehicle and your needs. 6

0,0 6802 0,0 6804 0,0 6806 0,1 6600 0,2 6602 0,3 6604 0,3 6606 0,4 6608 0,4 6610 0,4 6612 0,4 6614 0,5 6616 0,5 6618 0,6 6620 0,6 6622 0,6 6624 0,6 6626 0,8 6632 0,4 6699 470 298 470 388 470 598 470

9 Rubber mat to shelves Width Length Kg Part.No 1400 * 5, * * 0, , , , , , , , , , , , , , , , , , , , * Our rubber mat is 1 mm thick and has a plain surface. Our floor mat (no. 5204) is ribbed and reinforced. * - Sold by running meter. (Full roll is 10 meters) 0, , , , , , , , , , , , , , , Rubber mat to sliding shelves Fits in Kg Part.No , , , & , , 1887 & , , 1890 & ,

Plastic bin to shelves Length Width Height

No 300 121 145 0,3 3010 300 170 145 0,3 3012

145 470 291 145 0,4 3014 0,4 3016 0,6 3018

of bins 291 mm 170 mm 121 mm 302 mm 1 1 392

mm 2 1 1 997 mm 1 4 1086 mm 1 3 2 1176 mm 2

10 Plastic bin to shelves Length Width Height Kg Part.No , , , , , , Shelf width Guide for plastic bins Quantity of bins 291 mm 170 mm 121 mm 302 mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 2 8 8

T7805 Sliding drawer & shelf frame Depth Length Height

No 230 1250 700 17,0 T7805 Total height is adjusted with

illustration. The frame is extendible 2 ways.

No 0,5 0,5 T7806 T7806 Load carrier Length Width No 1500

Min Max 623 1234 950 1494 8,2 8550 Length Width Height

75 26,0 8562 8560-8566 950 700 75 1300 700 75 20,9 8565

11 T7805 Sliding drawer & shelf frame Depth Length Height Kg Part.No ,0 T7805 Total height is adjusted with the legs and the top brackets to fit your needs and space. Bracket T7806 is used to stabilize fitted interior, see illustration. The frame is extendible 2 ways. Payload 140 kg. Kg Part.No 0,5 0,5 T7806 T7806 Load carrier Length Width Kg Part.No ,6 T7709 Universal bulkhead 0,0 T8393 Payload 190 kg, uniformly distributed load Sliding platform chassis Width Length Kg Part.No Min Max Min Max , Length Width Height Kg Part.No , , , , , , All platforms are extendable to two thirds of their length and the payload is 200 Kgs uniformly distributed. NOTE! The platforms is only the base unit, you design your own top. 9

Wheel box units 300 998 330 12,0 2760 300

470 998 330 470 1176 330 470 1210 330 14,1

No 373 197 385 6,7 2920 Tool compartments

No 1500 250 300 23,0 5034 1700 250 300 25,0

more. Gas bottle cabinet 470 392 605 18,5

door, includes brackets for either 1 or 2

12 Wheel box units , , , , , , Cabinets , , , The door can be hinged on the left or the right, as required comes with two hooks, 2784 comes with two hooks and a rod. File box Length Width Height Kg Part.No , Tool compartments Length Width Height Kg Part.No , , Sturdy storage of spades, crowbars and more. Gas bottle cabinet , Our gas bottle cabinet with sealed door, includes brackets for either 1 or 2 bottles, a removable shelf and vent pipe. The door can be hinged on the left or the right, as required. 10

13 Tool case , The case comes with a mix of inserts. Additional inserts can be purchased separately. Case inserts ,0 0, ,0 0, ,1 0, Tool case compartment ,5 2, With the tool case in a compartment you can fit a case in a stack of drawers. Tool case bracket Depth Kg Part.No 300 0,5 0, ,7 0, The Edstrom portable tool case can be housed directly onto the frame on 2 brackets. Tool case holder ,4 1, This bracket is mainly designed to fit on to our shelf frames, you can rotate the holder to fit on racking with both 300 and 470 mm depths. Tool case/file holder ,4 4, Up to four cases and a binder can be stored in the holder. 11

14 Essve case system 2902 Description Kg Part.No Shelf 470x605 mm 3, Shelf frame 470x670 mm 2, Case bracket 470 mm, depth 1, EssBox case large 0, EssBox case small 0, Case stand for 3 cases 7, Case bracket for Essbox large, 1 case 3, Case bracket for Essbox small, 1 case 0, Mounting kit for Essboxrack 0, Plastic mat 462x595 mm 0, Essboxrack for 3 cases 16,8 F F60001 Special shelf , , A shelf length adapted to match Festool cases on bracket A perfect rack for the popular cases. 12

Vice 360 135 140 10,3 TL00001 5004 The forged vice is

Extendable vice holder/bench Width Height Goes with Kg Part.

both 300 and 470 mm deep shelf frames, can be turned for

Foldable vice holder/bench 768 mm Kg Part.

to vice holders 2950 Description Kg Part.

15 Vice ,3 TL The forged vice is complete with pipe jaw. Max opening 140 mm. Other sizes are available. Vice holders , , Plate meassurement 180x210 mm. Cover 2950 is included (see below). Extendable vice holder/bench Width Height Goes with Kg Part.No mm 12, mm 14, Fits both 300 and 470 mm deep shelf frames, can be turned for mounting on both right and left sides. Foldable vice holder/bench 768 mm Kg Part.No 6, mm 172 mm 782 mm 205 mm 201 mm Accessories to vice holders 2950 Description Kg Part.No Cover, includes in 5012 & , Adjustable support, mm 1, Spacer, raise 5012 & mm 0, Adjustable support (2952) fits 2724, 5012 and Spacer (5027) is useful when you need to get over a step

Gas bottle holder adjustable Depth Width

95 300 200 145 1,3 2913 5 kg Acetylene &

16 Gas bottle holder adjustable Depth Width Height Tube Ø Kg Part.No < 300 0, Liquefied petroleum gas P6 (bottles with 320 mm Ø can be stored after modification). Gas bottle holder single Depth Width Height Tube Ø Kg Part.No < 300 0, Liquefied petroleum gas P6, could also be used for storing refrigerant bottles. Gas bottle holder double Depth Width Height Tube Ø Kg Part.No , kg Acetylene & Oxygen bottles. Gas bottle holder shelf Liquefied petroleum gas P11 or 5 kg Acetylene & Oxygen. Bracket for two bottles is included. 6, Gas bottle holder wallmounted Depth Width Height Tube Ø Kg Part.No , Acetylene & Oxygen (AGA A21 & O20 or similar). 14

17 Case support Depth Length Height Kg Part.No , , Adjustable bracket ideal for fixing between shelf frames to secure tool cases, for example. Comes in 1568 mm length, can be cut to fit your configuration. Add an extra bracket (2936) for maximum flexibility, one is included. Hose/cable rack , Tube/can holder , Place in a shelf or separate it in two halfs and mount them on a pegboard. Universal hook , Mount on a pegboard or hang on a shelf. Pegboard tray , , , ,

18 File holders 34/ , , , should be placed in a shelf Clothes hook Triple , , Quad Work bench Depth Thickness Part.No mm WP mm WP00003 Purchase per running metre 16

19 Spray can holder Can holder, plastic Clamping rack Ø Height Part.No Ø Height Part.No Length Height Loops Part.No Parts 25 Tool holder kit Part.No

20 Lashing ring Part.No Lashing ring Part.No Lashing ring Part.No Nylon strap Nylon strap Nylon strap Length Width Part.No Length Width Part.No Length Width Part.No part with tensioner. 2-part with hooks Nylon strap with brackets Rubber strap Length Width Part.No Length Part.No By the meter 285 Whole package 10 meter

2809 2811 Angle brackets Width Measurement Part.

80:87:80 58:64:58 2801 2803 2805 2807 2808 2809 2811 2801 2803 2805 2807

No Mixed parts Mixed parts To vice and vice holder 146 238 57 5501 5502

No M6 M6 M6 M6 M6 M6 M6 M6 M6 M6 10 12 16 20 25 30 35 50 Nut Ø 22 2800

5624 5640 5642 5640 5642 M8 16 M8 20 M8 30 M8 35 M8 40 M8 50 M8 60 M8 Nut

21 Angle brackets Width Measurement Part.No x x x x x :87:80 58:64: Mounting kits Information Parts Part.No Mixed parts Mixed parts To vice and vice holder Nuts & bolts M6 M Ø Length Per Pack Part.No M6 M6 M6 M6 M6 M6 M6 M6 M6 M Nut Ø M8 16 M8 20 M8 30 M8 35 M8 40 M8 50 M8 60 M8 Nut M8 Ø Blind rivet Ø Length Per Pack Part.No 4,8 4,8 4,8 4,8 4, Steel Alu Steel Steel Steel ,4 15 Steel ,4 18 Steel ,4 22 Steel ,4 30 Steel ,4 40 Alu/Steel

235-410 mm 0,6 2830 1840 & 1842 1844 2830 Cross brace

No 0,8 2850 The brace is suitable for all sizes of

It can also be used in conjunction with our standard

Mounting brackets Length Measurement No 2815 2812 200

1568 50 x 30 1200 0,3 2081 0,3 2810 0,5 2812 12,3

designed to use with our shelf frames, one example is

22 Brackets Depth Height Kg Part.No 160 0, , mm 0, mm 0, & Cross brace Kg Part.No 0, The brace is suitable for all sizes of sliding shelves and shelf frames above 505mm. It can also be used in conjunction with our standard shelves up to 1176mm in length. Mounting brackets Length Measurement Kg Part.No x x x (5 pcs) 50 x x , , , , , , is designed to use with our shelf frames, one example is to join two frames at the height is a pole with the same profile as our shelf frames. L-type support rail Length Measurement Kg Part.No x x x x x x 30 1, , , , , ,

flexiplan Sections Max Length Articles 1 2000 1 x 1370 2

Shelves and mounting kits (1372) must be added, one 1372 per

Rhino Pipe tube Length Width Height Kg Part.

0 RRR1504 8467 Our proven pipe carrier with a load retrieval

roof, pull it back to the rear door in a simple operation.

23 Flexiplan Width Height Kg Part.No , , , Guide for flexiplan Sections Max Length Articles x x x x x 1370 Shelves and mounting kits (1372) must be added, one 1372 per shelf. See shelves on page 6, don t exceed 1568 mm length. Rhino Pipe tube Length Width Height Kg Part.No , RRR Our proven pipe carrier with a load retrieval device inside the tube which gives easy access to your pipes. Internal ladder holder Length Kg Part.No ,2 T8900 Store your ladder on the inside of the roof, pull it back to the rear door in a simple operation. The aluminum rail comes in two parts with a joining piece. Rhino Safestow Length Kg Part.No 3,1m Single ladder Stowsafe 4 50kg RR m Twin ladder Stowsafe 4 50kg RR

Paper towel dispenser Information Kg Part.

24 Fire extinguisher Information Kg Part.No 1 kg, powder TL kg, powder TL kg, powder Wall bracket is included. Paper towel dispenser Information Kg Part.No Magnetic bracket to 5084 Dispenser with paper Paper to First aid Information Kg Part.No Frist Aid box HY00006 Alcohol Free wipes Dispenser HY00034 Eye Wash Station TL00057 Basket Information Dark grey, spray can Light grey, spray can Edström green, spray can Edstrom colours Part.No

25 Accessories UNIVERSAL SEAT COVERS Weight Description Part. No 0,4 kg Single HY ,6 kg Double HY00013 SOAP DISPENSER Weight Description Part. No 2,0 kg Soap Dispenser HY00015 HAND WASH (Eberspacher) Weight Description Part. No 4,5 kg Hot HY ,0 kg Hot & Cold HY00005 HAND WASH (Teal) Weight Description Part. No 4,0 kg 12V voltage sensing HY

EL00450 Description Raised, 15 mm high Recessed, Ø hole 160 mm 12/24V

IP67 Reg 65 LED Grill Strobe Amber Part.

12/24V - 27W 9 pcs 3W Cree-diods 1800 lumen, 6000K Water proof

aluminium Protection class IP68 Revolving Part.

26 LED lighting Description Length Part.No T-piece connector EL00446 Lighting strip 5067 Pre-made 2 pin looms 0.5m EL00447 Pre-made 2 pin looms 1.5m EL00448 Pre-made 2 pin looms 3m EL00449 Pre-made 2 pin looms 5m EL00450 Description Raised, 15 mm high Recessed, Ø hole 160 mm 12/24V 21 st SMD diods 420 lumen Built-in motion detector Protection class IP67 Reg 65 LED Grill Strobe Amber Part.No EL00418 LED work lamp (Internal) Description DxWxH 75x130x164 mm 12/24V - 27W 9 pcs 3W Cree-diods 1800 lumen, 6000K Water proof DT-contact with 1 meter cable On and off-button in the back House of aluminium Protection class IP68 Revolving Part.No EL00293 LED work lamp (External) Description DxWxH 46x110x128 mm 12/24V - 27W 9 pcs 3W diods 1600 lumen Bracket in stainless steel Epoxi coated house of aluminium Protection class IP67 Part.No EL

27 Sine Wave Inverter Depth Width Height Watt Weight Kg Part.No No ,5 kg EL ,5 kg EL ,5 kg EL00263 Protected against Short circuit High temperature Overvoltage Undervoltage Overload Incorrect input polarity LED Light Bars 5831 Part. No Width EL mm EL mm EL mm EL mm 25

ACCESSORIES 1 12 9 2 8 3 6 10 7 5 13 14 11 4 Pos. Description Pos.

holder 3 Pegboard basket 10 Case 4 Vice and holders 11 Gas bottle holders 5 Case

28 ACCESSORIES Pos. Description Pos. Description 1 Universal hook 8 Shelf dividers 2 Cable/Hose rack 9 Case/File holder 3 Pegboard basket 10 Case 4 Vice and holders 11 Gas bottle holders 5 Case support 12 Can/Tube holder 6 Plastic bins 13 Eye wash station 7 Drawer inserts 14 First aid box 26

29 27

30 GENERAL The kit supplied will come complete with rubber matting to the shelves and foam lining to the drawer units where applicable. System Edström is certified to SS-EN-ISO 9001:2015 to give reassurance to the quality standards we adhere to. All materials used in System Edström products can be re-cycled 100%. We are certified to SS-EN ISO 14001:2015. Due to on-going product development, we reserve the right to update products, without notice, from time to time. REMEMBER Now that you have chosen System Edström for your Mobile Workspace, you have taken the first and most important step to make your mobile workshop safe and functional. From here on, it s up to you to keep your workspace safe and functional. As a general rule, load heavy items low down, we have many additional load retention systems and will be happy to advise you on suitable systems for your needs. Please make sure NOT to exceed the maximum payload of the vehicle. SECURITY Our products have been tested in two separate tests; at Millbrook (UK) where we conducted a crash test to ECE 17:07 and also at Valutec (France) to INRS NS286. Please read more about us by visiting our homepage E&OE 28

31 FRA Improved Efficiency Simplicity Made in Sweden Up to 5 years warranty Over 60 years of experience Crash Tested v2_11.18

32 Certificate No. CA14299 Certificate No. EN1697 R Certificate No. HS1719 R ISO 9001:2015 REGISTERED COMPANY ISO 14001:2015 REGISTERED COMPANY BS OHSAS 18001:2007 REGISTERED COMPANY I N R S N S EDSTROM OF SWEDEN LTD. 7 Cronin Road Weldon South Industrial Estate Corby NN18 8AQ CONTACT Tel: info@edstrom.co.uk

Professional Van Racking

Professional Van Racking A place for everything. This catalogue is common to all System Edström agents. Occasionally there are national differences thus a product might not be sold. Contents A place for