TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC , Edition 3.0
|
|
|
- Magdalen Hines
- 5 years ago
- Views:
Transcription
1 TETING AND MEAUING EQUIPMENT/ALLOWED UBCONTACTING IEC , Edition 3.0 equired May be subcontracted, see OD 2012 F pecialized Facility, see IECEE 02-2 W Witness testing in the categories MED and MEA 3PP Three Phase Power upply required P O V I I O N A L Temperature Humidity Air pressure / / / 10.4 Input Voltage Input Current / Power Input frequency hort circuit / Overload Temp indicator / recorder Humidity indicator / recorder Air pressure indicator / recorder uitable voltmeter Current / power meter Frequency measuring device ; Current meter; Power meter Temperature recorder with thermocouples or a suitable resistance Measuring device uitable variable resistor(s) topwatch Temperature measurements Temperature recorder with thermocouple pread of fire White Tissue-paper oft wood Cheesecloth 1/7 IEC IECEE 2014
2 5.3 Durability of markings Cloth pecified agent or 70% Isopropyl alcohol uitable timer / stopwatch / 6.3 / esidual Energy uitable oscilloscope recorder / set-up CL meter 6.2 Accessibility Test fingers as per annex B (with suitable means to evaluate the application force), 100 mm long test pin (Ø4 mm) and Ø3 mm test pin / / / / / / Accessible voltage / current / capacitance / stored energy Bonding impedance / earth continuity test Terminals for external circuits (capacitive discharge test) Measuring circuits / filter networks of annex A s CL meter Oscilloscope Current source Current meter Torque gauge for screw assemblies Caliper Oscilloscope uitable Probe (100 M Ohm input impedance, max. input cap. 25 pf) Isolation transformer uitable witch Off Unit Measuring circuits / filter networks of annex A 2/7 IEC IECEE 2014
3 6.7 / Clearance & creepage distances Micrometer / caliper Oven Test equipment for tracking index CTI Tester Test solution A Distances between Terminal and foil Humidity chamber T: C, H: 0 99 % Chronometer Dielectric strength tests High Voltage ac / dc tester or Impulse tester Cord entry test Micrometer / Caliper Cord anchorage test uitable Torque gauge Limitation of force and pressure Gap limitations between moving parts 7.4 tability tests Tape measure uitable weight scale Torque gauge 10 inclinometer [0-45 ] (trigonometry to measure the angle can also be acceptable) 7.5 trength of handles Weight scale Weights 70 mm wide strap 3/7 IEC IECEE 2014
4 7.6 Wall mounting Weight scale Weights tatic test 12 mm diameter hemispherical end rod Oven High Voltage ac / dc tester or Impulse tester Dynamic test Ø50 mm hardened steel ball of 500 grams as specified Drop test Weight scale 30 inclinometer (trigonometry to measure the angle can also be acceptable) mooth, hard, rigid surface 10 mm & 20 mm wooden studs Hand-held equipment 50 mm thick hard wood, density > 700 kg / m 3 Climatic chamber / 14.7 Flammability tests Bunsen burner, gas Oven Constructional requirements Inclinometer Caliper 4/7 IEC IECEE 2014
5 9.4 Limited Energy Circuits s Current meter uitable variable resistors topwatch Heating Equipment Test Corner, Plywood 20 mm thick, black Heating Equipment, Fixed Installation Black 10 mm, thick plywood walls Enclosures Oven 200 C Temperature recorder with Thermocouple Chronometer Insulating materials Ball pressure apparatus (with suitable means to evaluate the application force), heating cabinet. Comment [PU1]: Only variable resistors required; electronic loads are not allowed! Vicat (IO 306 method A) [set-up consist of heating chamber, heat transfer liquid, weight, penetration indicator, needle, temperature recorder, calliper, dielectric tester] 11.2 Cleaning / decontamination As per manufactuers instructions 11.3 pillage Water 0.2 litre measure Tape / stopwatch 11.4 (6.8.4) Overflow Water (or appropriate fluid), Volume indicator Inclinometer High Voltage ac / dc tester or Impulse tester / stopwatch 11.6 pecially protected equipment (IP rated) ee IEC for test equipment W 5/7 IEC IECEE 2014
6 11.7 Fluid pressure & leakage uitable pressure & volume measurement devices Ionizing radiation uitable ionization meter (limit 5 v / h, indicative) 12.3 UV adiation UV meter (compliance / limit according IPA guidelines) 12.4 Microwave adiation uitable measuring device ound pressure level ound level meter Ultrasonic pressure uitable indicator / ultrasonic level meter 12.6 Laser sources As per IEC High vacuum devices As per IEC Motors Temperature recorder with thermocouple 14.3 Over temperature protection devices s Oscilloscope Temperature recorder with thermocouple High Voltage ac / dc tester or Impulse tester 14.6 Mains transformers tested outside equipment Measuring equipment, see clause / Transient over voltage Impulse tester to IEC / Mains transformers (sc / overload) Electronic loads, or suitable resistors s Temperature recorder with thermocouples or a suitable resistance measuring device 15.3 eliability (Interlocks) s / Annex A Measurement Circuits A.1 to A.4 Comment [PU2]: Electronic loads not allowed; only variable resistors required in acc. to /7 IEC IECEE 2014
7 Annex B tandard test fingers Test probe 11 of IEC Test probe B of IEC Annex H Qualification of conformal coating for protection against pollution Climatic chamber Chronometer Annex K Insulation requirements not covered by 6.7 uitable measuring equipment as noted for 6.7 General 3 phase power supply W 7/7 IEC IECEE 2014
Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting. 3 General requirements None -
IECEE OD-5003-1:2015 IEC 2015 1 TETING AND MEAUING EQUIPMENT/ALLOWED UBCONTACTING IEC 60730-2-5:2013-11, Edition 4.0 Automatic electrical controls for household and similar use Part 2-5: Particular requirements
IECEE OPERATIONAL DOCUMENT
IECEE OD-5003-1 Edition 1.0 2015-06-03 IECEE OPEATIONAL DOCUMENT IEC ystem of Conformity Assessment chemes for Electrotechnical Equipment and Components (IECEE ystem) Committee of Testing Laboratories
Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting. 3 General requirements None -
IECEE OD-5003-1:2015 IEC 2015 1 TETING AND MEAUING EQUIPMENT/ALLOWED UBCONTACTING, Edition 1.0 Automatic electrical controls Part 2-22: Particular requirements for thermal motor protectors POVIIONAL equired
IEC , 1 Ed. ( ) TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
IEC YTEM FOR CONFIRMITY TETING AND COMMITTEE OF TETING LABORATORIE IEC 62368-1, 1 Ed. (2010-01) TETING AND MEAURING EQUIPMENT/ALLOWED UBCONTRACTING R = Required to be at Lab = May be subcontracted W =
Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting. 3 General requirements None -
IECEE OD-5003-1:2015 IEC 2015 1 TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING, Edition 5.0 Automatic electrical controls Part 1: General requirements POVISIONAL equired S May be subcontracted, see
National Standard. of the People s Republic of China
Translated English of Chinese Standard: GB4793.1-2007 www.chinesestandard.net Sales@ChineseStandard.net ICS 19.080; 71.040.10 L 09 National Standard GB of the People s Republic of China GB 4793.1-2007
IEC SYSTEM FOR CONFORMITY TESTING AND COMMITTEE OF TESTING LABORATORIES CERTIFICATION OF ELECTRICAL EQUIPMENT
IEC SYSTEM FO CONFOMITY TESTING AND CETIFICATION OF ELECTICAL EQUIPMENT COMMITTEE OF TESTING LABOATOIES =equired by Lab S=May be subcontracted TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING Power
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that CertifiGroup, Inc. 901 Sheldon Dr. Cary,
020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)
020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service
< > Page 2 of 84
age 2 of 84 articulars: test item vs. test requirements Equipment mobility...: Building-in Operating condition...: Continuous Mains supply tolerance (%)...: -10%, +10% Tested for IT power systems...: Yes
TEST REPORT IEC Part 1: General requirements for basic safety and essential performance
jhćmtc Test Report issued under the responsibility of: TEST REPORT IEC 60601-1 Part 1: General requirements for basic safety and essential performance Report Number.... : T223-0128/16 Date of issue...
Applicant s address. Identification: (Model No.) Serial No.: Lab Name Lab address
Test Report No.: xx001 Page 1 of xx Issue Date: DD/MM/YYYY Manufacturer: Applicant s Name Applicant s address Test item: Set Top Box Identification: (Model No.) Serial No.: Receipt No.: Date of receipt:
013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS
013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEYLON ELECTRICITY BOARD SRI LANKA Specification for MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEB Specification
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: www.nemko.com TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 257636 Date of issue... :
COVER PAGE FOR TEST REPORT
Issue Date: 2005-08-06 Page 1 of 1 Report Reference # E137006-A6-CB-1 COVER PAGE FOR TEST REPORT Test Item Description: Model/Type Reference: Rating(s): Standards: Applicant Name and Address: Factory Location(s):
PhaseCap Premium PFC Capacitors Gas-impregnated n Dry type n Concentric winding n Wavy cut n Triple safety system
Premium PFC Capacitors General capacitors in cylindrical aluminum cases have been designed for power factor correction in low-voltage plant. Loads like motors and transformers consume active power as well
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 16059155 001 Date of issue... : Apr.24,
COVER PAGE FOR TEST REPORT
Issue Date: 2009-07-23 Page 1 of 2 Report Reference # E199929-A2-UL-2 COVER PAGE FOR TEST REPORT Product Category: Power Supplies for Information Technology Equipment Including Electrical Business Equipment
Test Report No.: Xxxx 001 Page 1 of xx. Receipt No.: Date of receipt: DD/MM/YYYY
Test Report No.: Xxxx 001 Page 1 of xx Issue Date: DD/MM/YYYY Manufacturer: Test item: Identification: Serial No.: Receipt No.: Date of receipt: DD/MM/YYYY Testing laboratory and its address: Test specification:
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 31282706.003 Date of issue... : 22 nd March,
ENEC LICENCE. Licence No. ENEC Page 1/3 Date of Issue
ENEC LICENCE Licence No. ENEC-01360 Page 1/3 Date of Issue 2016-03-04 Licence Holder WAGO KONTAKTTECHNIK GMBH & CO KG HANSASTRASSE 27 MINDEN, 32423 Germany Production site WAGO CONTACT SA ROUTE DE L'INDUSTRIE
Fuse switch disconnectors
SWITCHGEAR RBK Fuse switch disconnectors intended for distribution of electricity and protection of electrical equipment against short-circuits and overloads, with industrial fuse links ENERGY SAFELY SWITCHED
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of Fujitsu Technology Solutions GmbH Product Compliance Center Restricted TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements
NXPLUS C Single busbar. Maintenance-free for lifetime
NXPLUS C Single busbar Maintenance-free for lifetime Energy Distribution Welcome! Page 2 Content Overview Technical data Typicals Panel design Circuit-Breaker panel Busbar Operation Metering Low-voltage
Page 1 of 4 Report Reference No. CPSZ IEC /EN Clause Requirement + Test Result Remark Verdict
age 1 of 4 Report Reference No. CSZ0928781 Report Reference No... : Tested by (name and signature)... : Approved by (name and signature).. : TEST REORT IEC 61010-1/ EN 61010-1 Safety requirements for electrical
S4562C 1085 COMBI BOARD APPLICATION. Contents PRODUCT HANDBOOK. General
S4562C 1085 COMBI BOARD APPLICATION PRODUCT HANDBOOK The S4562C 1085 combi board is an integration of an on/off temperature control and an electronic ignition control. The S4562C 1085 combi board is intended
OPERATING INSTRUCTION
11/05 Form #271 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 OPERATING INSTRUCTION Visit us at www.testequipmentdepot.com MODEL 3132 ANALOG INSULATION-CONTINUITY TESTER
TECHNICAL SPECIFICATIONS OF PCC PANEL
S. no. TECHNICAL SPECIFICATIONS OF PCC PANEL Technical parameters AS PER SPECIFICATION CONSTRUCTIONAL FEATURES TO BE FILLED BY THE SUPPLIER 1 Manufacturer s name To be specified by supplier 2 Rated operational
BM kv Digital Insulation Tester USER MANUAL
M BM5200 5 kv Digital Insulation Tester USER MANUAL CONTENTS Safety warnings...3 Symbols used on instrument...4 Cleaning...4 General description...5 Insulation resistance test modes...5 Automatic discharge...5
MAX. AC 600V HOLD V M H.V. LIVE CIRCUIT DIGITAL INSULATION TESTER DO NOT OPERATE IF LIT POWER DATA HOLD TEST ON / OFF 250V 500V 1000V OFF CAT.
INSULATION TESTER EARTH MAX. AC 600V LINE AC -+ HOLD V k M LIVE CIRCUIT DIGITAL INSULATION TESTER DO NOT OPERATE IF LIT M H.V. POWER DATA HOLD TEST ON / OFF 250V 500V 1000V ACV OFF 0 CAT.III 600V INSTRUCTION
Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide
1ZSC000563-AAC en, Rev. 2 Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: NCB TÜV SÜD PSB Pte Ltd 1 Science Park Drive, Singapore 118221 TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements
1ZSE en, Rev. 3. Wall bushings, type GSA-AA Technical guide
1ZSE 2750-112 en, Rev. 3 Wall bushings, type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
Guideline No.: E-07(201501) E-07 TRANSFORMERS. Issued date: October 20,2015. China Classification Society
Guideline No.: E-07(201501) E-07 TRANSFORMERS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
TEST REPORT IEC Low-voltage switchgear and control gear Part 7-4: Ancillary equipment PCB terminal blocks for copper conductors
r Test Report issued under the responsibility of: TEST REORT Low-voltage switchgear and control gear art 7-4: Ancillary equipment CB terminal blocks for copper s Report Number.... : 2169331.75 Date of
017: 1998 CEB STANDARD RING MAIN UNIT CEYLON ELECTRICITY BOARD SRI LANKA
017: 1998 CEB STANDARD RING MAIN UNIT CEYLON ELECTRICITY BOARD SRI LANKA CONTENTS PAGE 1. Scope 2 2. System Parameters 2 3. Service Conditions 2 4. Applicable Standards 3 5. Basic Features 4 6. Quality
1ZSE EN, REV. 4. Wall bushings type GSA-AA Technical guide
1ZSE 2750-112 EN, REV. 4 Wall bushings type GSA-AA Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
LV Capacitors QCap-L series Capacitors for power factor correction
LV Capacitors QCap-L series Capacitors for power factor correction ABB and power quality ABB is a leader in power and automation technologies that enable utility and industry customers to improve their
Guideline No.: E-07(201610) E-07 TRANSFORMERS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-07(201610) E-07 TRANSFORMERS Issued date: October 28,2016 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
Guideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society
Guideline No.: E-07(201712) E-07 TRANSFORMERS Issued date: December 26, 2017 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
SIGMA SERIES DE METER
SIGMA SERIES DE METER Analogue Meters www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current
Auxiliary Relay (7PJ11) and Trip Relay (7PJ12)
s www.siemens.com/energy Auxiliary Relay (7PJ) and Trip Relay (7PJ2) Better protection and more efficiency for your power system Answers for infrastructure and cities. Auxiliary Relay and Trip Relay Catalogue
Menu. Home About this portal Latest updates. Print Save Resource detail Citations. Table of Contents
Menu Home About this portal Latest updates Print Save Email Resource detail Citations AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar
Test Report. E4S-Box V1.0
Test Report No. 05 / 5040-1-1a E4S-Box V1.0 S/N: 8 The results refer only to the tested equipment. Without written permission of the test laboratory it is allowed to publish parts of this test report.
MY /2-DIGIT DIGITAL MULTIMETER Users Manual
MY-65 4 1/2-DIGIT DIGITAL MULTIMETER Users Manual Read the Users Manual thoroughly before use. WARRANTY This instrument is warranted to be free from defects in material and workmanship for a period of
045 : 2000 CEB STANDARD
045 : 2000 CEB STANDARD LOW VOLTAGE FUSE SWITCH DISCONNECTOR CEYLON ELECTRICITY BOARD SRI LANKA Specification for LOW VOLTAGE FUSE SWITCH DISCONNECTOR CEB Standard 045 : 2000 CEYLON ELECTRICITY BOARD No.
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
TEST REORT Information technology equipment Safety art 1: General requirements Report Number.... : UNI2015122413SR-01 Date of issue... : 2015-12-22 Total number of pages... 42 Tested by (+ signature) Steven
Instruction manual. High voltage insulation resistance tester KEW3121B/3122B
Instruction manual High voltage insulation resistance tester KEW3121B/3122B Contents 1. Safety warnings... 1 2. Features... 5 3. Specification... 6 4. Instrument layout... 9 5. Getting started... 10 5-1
Resin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK
1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
EU RO Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 5. TYPE APPROVAL CERTIFICATE CONTENT... 7 6. APPROVAL DATE AND REVISION NUMBER... 7 7.
2-Year Limited Warranty. See the Users Manual for the full warranty.
1732/1734 Energy Logger Safety Information 2-Year Limited Warranty. See the Users Manual for the full warranty. Go to www.fluke.com to register your Product and find more information. A Warning identifies
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 200 Vdc 4 Low Profile 4 High Regulation 4 Ultra Wide Input Ranges (9-36Vdc, 20-60Vdc, 36-72Vdc) 4 1000 Vdc Output Isolation 4 Continuous Short Circuit
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Page 1 of 46 TEST REPORT Information technology equipment Safety Part 1: General requirements Report Number.... : 160414015SZN-002 Date of issue... : May 09, 2016 Total number of pages... : 77 pages Applicant
POWER CAPACITORS. Cylindrical capacitor standard duty
Construction Dielectric: Polypropylene film Non PCB, Soft Polyurethane resin Extruded round aluminium can with stud Provided with discharge resistors Overpressure disconnector Features Three phase, delta
:2006+A11:2009+A1:2010+A12:2011+A2:2013
Page 1 of 55 Report No.:L611332L009 LOW VOLTAGE DIRECTIVE TEST REPORT IEC 60950-1:2005 (2nd Edition) Am 1:2009 Am 2:2013 and/or EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 Information technology
ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address... :
Test Report issued under the responsibility of: TEST REORT IEC 60898-1 Circuit-breakers for over current protection for household and similar installations art 1 - Circuit-breakers for a.c. operation Report
This standard covers the requirements of lighting chains. This standard covers only the safety requirements.
FOREWORD (Formal clause will be added later) This standard covers the requirements of lighting chains. This standard covers only the safety requirements. This standard (Part 5/Section 7) is one among the
BATTERY CHARGERS NO. 3
Date: January 10, 1992 BATTERY CHARGERS NO. 3 To: Subject: Manufacturers of Commercial/Industrial Battery Chargers Expansion of CSA Certification Service for Power Supplies to Include Low Voltage, Outdoor
TEST REPORT IEC Part 1: General requirements for basic safety and essential performance
Test Report issued under the responsibility of: TEST REPORT IEC 60601-1 Part 1: General requirements for basic safety and essential performance Report Number.... : T223-0347/14 Date of issue... : 2014-12-05
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 15 Chelsea Fields Estate Contact: Mr R Sodha Western Road Tel: +44 (0)20 8 254 5236 London Fax: +44 (0)20 8646 8099 SW19 2QA E-Mail: rajesh.sodha@nemko.co.uk
SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED)
PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Issue 3 2012 SWITCHGEAR FOR SERVICE UP TO 36kV (CABLE AND OVERHEAD CONDUCTOR CONNECTED) www.energynetworks.org 2012 Energy Networks
Table of Contents. Title Page UT501/UT502 OPERATING MANUAL. Introduction. Unpacking the Meter. Safety Information. International Electrical Symbols
Table of Contents Title Page Introduction Unpacking the Meter Safety Information International Electrical Symbols The Meter Structure Key Functions Rotary Switch Measurement Operation A. Measuring Voltages
Vol-Con XL (61-086) Voltage/Continuity Tester and Vol-Test (61-085) Voltage Tester Instruction Manual WARNING
Vol-Con XL (61-086) Voltage/Continuity Tester and Vol-Test (61-085) Voltage Tester Instruction Manual WARNING #61-085 #61-086 Read First: Safety Information This tester complies with UL3111-1, Cat III-600
FIXED POWER FACTOR CORRECTION EQUIPMENT 5KV CLASS MEDIUM VOLTAGE SECTION Z
PART 1 GENERAL 1.01 1.02 1.03 1.04 1.05 SCOPE The Contractor shall furnish and install fixed power factor correction equipment as specified herein and as shown on the contract drawings. This specification
RX 3 M.C.B A up to 63 A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
Digital Insulation Resistance Testers. you can depend on
Digital Insulation Resistance Testers you can depend on Fluke 1550 MegOhmMeter Digital insulation testing up to 5000 Volts The Fluke 1550 is a digital insulation tester capable of testing switchgear, motors,
RX 3 M.C.B A up to 63 A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A Cat. N (s): 4 197 49 to 4 199 23 CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions...
Hinged Safety Door Switch
Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),
LS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
Product Data Sheet DV5214 NU
The engineer's choice DV5214 NU INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
Operating Manual (Edition 04/2004) sinamics. Braking Module / Braking Resistor SINAMICS G130
Operating Manual (Edition 04/2004) sinamics Braking Module / Braking Resistor SINAMICS G130 04/04 Contents Contents 1 Safety Information 1-1 2 General 2-1 3 Mechanical Installation 3-1 4 Connection 4-1
LV Capacitor CLMD03 Power Module Instruction manual
LV Capacitor CLMD03 Power Module Instruction manual Table of Contents 1 Safety... 3 2 Upon reception... 3 2.1 Inspection on reception... 3 2.2 Storage- transportation handling... 3 3 Hardware Description...
TEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
Presented to the IAPMO Standards Review Committee on December 9, 2013
Summary of Substantive Changes between the 2010 edition including Updates No. 1 and No. 2 dated September 2010 and August 2011 and the 2013 edition of CSA C22.2 No. 14 Industrial control equipment Presented
D4BS. Safety-door Switch. Model Number Structure. Switch D4BS - S Operation Key D4BS - K. Ordering Information
Safety-door Switch Safety-door Switch s Special Operation Key Directly Pulls Apart the Contacts from Each Other and Contributes to the Safety of the Production Site Conforms to EN (TÜV) standards corresponding
ABB PTTR SPAIN. Zaragoza. The product: Cast coil transformers
ABB PTTR SPAIN Zaragoza. The product: Cast coil transformers ABB BA Transformers - 1-5/7/2007 Dry Type Vacuum Cast Coil Transformer INTRODUCTION ABB BA Transformers - 2 - Product Portfolio II Dry Type
Product Data Sheet 8412 N/ The engineer's choice
The engineer's choice 8412 N/12-252 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical Interface - Output...
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Schatz Energy Research Center Humboldt State
TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements
Issue Date: 2015-06-25 Page 1 of 65 Report Reference # E122103-A137-CB-2 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment
Contact gap 7 mm (norm >5.5 mm) ÿ IN ENCLOSURE. ÿ WITH CLUTCH DRIVE
Switch disconnectors A modular and flexible range Contact gap 7 mm (norm 5.5 mm) Reversible terminal feature ÿ IN ENCLOSURE - Degree of protection: up to IP 66 - For 25A to 100A size switches (see Ithe
Low Voltage Directive Report
Low Voltage Directive Report SUPERIOR PRODUCT CONSULTION, INC 3F, NO. 10, ALLEY 6, LANE 235, PAO CHIAO RD., HSIEN TIEN, TAIPEI, TAIWAN R. O. C. 235 6 1 0 3 F TEL:886-29174137 FAX:556-2-29184517 The test
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62735-1 Edition 1.0 2015-08 colour inside Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data centres
Technical Data. Dimensions
Model Number Features 40 mm flush 4-wire DC ATEX-approval for zone 2 and zone 22 S Technical Data specifications Switching element function PNP NO/NC Rated operating distance s n 40 mm Installation flush
Books. Code of Practice for In-Service Inspection and Testing of Electrical Equipment (3rd edition) By IET Publication
Books Code of Practice for In-Service Inspection and Testing of Electrical Equipment (3rd edition) By IET Publication Available: 2008 Format: Paperback Product Code: PWR08630 ISBN: 978-0-86341-833-4 Pagination:
INSTITUTE OF TESTING AND CERTIFICATION (INDIA) PVT. LTD.
INSTITUTE OF TESTING AND CERTIFICATION (INDIA) VT. LTD. 25 6 Classification A control is classified 6. According to nature of supply 6.. Control for a.c. only 6..2 Control for d.c. only 6..3 Control for
DATASHEET - DILMC9-10(24VDC) Technical data General. Contactor, 3p+1N/O, 4kW/400V/AC3. Catalog No Eaton Catalog No. XTCEC009B10TD.
DATASHEET - DILMC9-10(24VDC) Technical data General Contactor, 3p+1N/O, 4kW/400V/AC3 Part no. DILMC9-10(24VDC) Catalog No. 277468 Eaton Catalog No. XTCEC009B10TD EL-Nummer 4110305 (Norway) Standards IEC/EN
Solenoid coil for control in potentially explosive areas Type BZ
Data sheet Solenoid coil for control in potentially explosive areas Type BZ BZ is a solenoid coil with ATEX / IECEx approval, applicable for zone 1 and 2 Ex environments. The coils are designed to be used
023 : 2006 CEB STANDARD. 12kV & 36kV LOAD BREAK SWITCHES CEYLON ELECTRICITY BOARD SRI LANKA
023 : 2006 CEB STANDARD 12kV & 36kV LOAD BREAK SWITCHES CEYLON ELECTRICITY BOARD SRI LANKA Specification for 12kV & 36kV LOAD BREAK SWITCHES CEB Standard 023 : 2006 CEYLON ELECTRICITY BOARD No. 50, Sir
(M-702) No. M5-122 ITEM SPEC CONDITION 1. Rating Rated Voltage 12.0 V DC CCW 0.30 A MAX
Model No. MS5N-1885-R/51 (M-702) No. M5-122 ITEM SPEC CONDITION 1. Rating 12.0 V DC Between Motor Terminals Load 54.0g-cm Pulley Direction of Rotation Viewed from Output Shaft CCW Side 2.Measuring Condition
TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements
Issue Date: 2015-06-26 Page 1 of 73 Report Reference # E122103-A140-CB-2 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment
IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REORT IEC 60950-1 Information technology equipment Safety art 1: General requirements Report Number....: CB110708E01 001 Date of issue...: August 10,
OTCF. Grid Solutions. Capacitor Voltage Transformers 72.5 kv to 800 kv. Quality Product Design. Seismic Withstand Capability.
GE Grid Solutions OTCF Capacitor Voltage Transformers 72.5 kv to 800 kv In high and extra high voltage transmission systems, capacitor voltage transformers (CVTs) are used to provide potential outputs
Comments on sub clause of IEEE draft 802.3bt/D2.4 Presenter: Arkadiy Peker Co-author : Yair Darshan May 15, 2017
Power Matters. TM Comments on sub clause 145.4.1 of IEEE draft 802.3bt/D2.4 Presenter: Arkadiy Peker Co-author : Yair Darshan May 15, 2017 1 Comments #121,122 Comment In the text Accessible external conductors
TECHNICAL REPORT NERA SATCOM AS ELECTRICAL SAFETY TESTING OF DC/DC REPORT NO REVISION NO. 02 DET NORSKE VERITAS
TECHNICAL REORT NERA SATCOM AS ELECTRICAL SAFETY TESTING OF DC/DC CONVERTER FOR THE NERA F77 SYSTEM REORT NO. 2004-3405 REVISION NO. 02 DET NORSKE VERITAS TECHNICAL REORT Table of Content age 1 SCOE OF
C:\Users\Steen Lauritzen\Dropbox\CTS - Citrotek\English quotation text\pharma\cp+10_1200 eng.doc
C:\Users\Steen Lauritzen\Dropbox\CTS - Citrotek\English quotation text\pharma\cp+10_1200 eng.doc 13.10.2017-1 - CTS - Climatic Test Cabinet Type CP+10/1200 C:\Users\Steen Lauritzen\Dropbox\CTS - Citrotek\English
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REORT IEC 60950-1 Information technology equipment Safety art 1: General requirements Report Number.... : CB170707E03 001 Date of issue... : 2017-08-23
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 1510053STO-001 Date of issue... : 2 November
67 IB INTERLOCKED SOCKET-OUTLET IEC 309 STANDARDS
Technical data and compliance with Standards Component Interlocked switched socket-outlets SELV socket-outlet Rotary switch MT60 miniature circuit breaker, C characteristic, 6kA Reference Standards EN
ELECTRICAL TESTING EN : A11: A1: A12:2011, IEC :2005 (Second Edition) + Am1:2009.
ELECTRICAL TESTING 839.01 Hermon Laboratories Ltd. Tel.+972 4 628 8001 Fax.+972 4 628 8277 SAFETY TEST REPORT ACCORDING TO: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011, IEC 60950-1:2005 (Second Edition)