CERTIFICATE OF ACCREDITATION
|
|
- Gwen Perry
- 5 years ago
- Views:
Transcription
1 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that CertifiGroup, Inc. 901 Sheldon Dr. Cary, NC has been assessed by ANAB and meets the requirements of international standard ISO/IEC 17025:2005 while demonstrating technical competence in the field of TESTING Refer to the accompanying Scope of Accreditation for information regarding the types of tests to which this accreditation applies. AT-1545 Certificate Number Certificate Valid: 6/8/ /12/2019 Version No. 004 Issued: 6/8/2017 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).
2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CertifiGroup, Inc. 901 Sheldon Dr., Cary, NC Quality Manager Phone: TESTING Valid to: May 12, 2019 Certificate Number: AT-1545 (IP2X-6X) Sec Rain Test IEC IEC IEC UL EN IEC EN UL Enclosures, Electrical Equipment Luminaries Rotating Electrical Machine Electrical Equipment of Machines Explosive Atmospheres Household and similar Electrical Appliances Probes, Drip Probes, Drip Probes, Drip, Rain Test Apparatus Probes, Drip Probes, Drip Probes, Drip Page 1 of 12
3 Sec Impact Test Sec Drop Test Sec Stress Relief IP1X-4X, IPX1-X4, IPX4K, IPX5-6, IPX6K, IPX7-X8, IPX9K IP5X, IPX4 - Section 9.1 IP5X, IP6X - Section 9.3(Dust) Sec (Impact Test) Sec. 8.5, Annex D (Gasket Tests) Outdoor Use Equipment Sec , Annex T Sec Impact Test Sec Drop Test Sec Stress Relief Test IEC UL IEC UL IEC DIN IEC IEC UL Medical Equipment Laboratory Equipment Audio, video and similar electronic apparatus Enclosures, Road Vehicle Equipment Outdoor Use Equipment Information Equipment Probes, Drip Probes, Drip Probes, Drip, 50mm sphere, Oven, Impact Hammer Probes, Drip Box, Oscillating Spray Tester, Spray Tester, Jet Nozzle, Immersion Tank,Dust Chamber Dust Chamber, Spray Tester, Oscillating Spray Tester, Thermocouple Reader, Tensile Strength Tester, Temperature and Humidity Recorder 50 mm sphere, 18kg Weight, 1.35kg Impact Weight, s 50 mm sphere, Oven, Probes, Drip Page 2 of 12
4 Type 1, 2, 3, 3R, 3X, 3RX, 3S, 3SX, 4, 4X, 5, 6, 6P, 12, 12K, 13 Sec 5.2 (Protection against Hazardous Parts) Sec. 5.3 (Dripping and Light Splashing) Sec 5.4 (Rain) Sec (Atomized Water- Method A) Sec (Atomized Water- Method B) Sec (Hose Method) Sec. 5.6 (External Icing) Sec. 5.7 (Hosedown) Sec. 5.8 (Indoor Corrosion Protection) Sec. 5.9 (Outdoor Corrosion Protection) Sec (Corrosion Protection) Sec (Temporary Submersion) Sec (Prolonged Submersion) Sec (Gasket Tests) Type 1, 2, 3, 3R, 3S, 4, 4X, 5, 6, 6P, 12, 12K, 13 Sec 8.2 (Drip Test) Sec. 8.3 (Rain Test) Sec (Atomized Water- Method A) Sec (Atomized Water- Method B) Sec (Hose Method) Sec. 8.5 (External Icing) Sec. 8.6 (Hosedown) Sec. 8.7 (Indoor Corrosion) Sec. 8.8(Outdoor Corrosion) Sec. 8.9 (Additional Corrosion) Sec.8.10 (Submersion Test) (External Pressurization Method) Sec (Gasket Tests) Sec (Rod Entry) Sec Drop Test NEMA 250 UL 50E UL/CSA/EN/IEC Enclosures, Electrical Equipment Enclosures, Electrical Equipment Enclosures, Electrical Equipment Probes, Drip Box, Rain Test Apparatus, Immersion Tank, Jet Nozzle, Atomized Water Nozzle, Salt Fog Chamber, Tensile Strength Tester, Thermocouple Reader Drip Box, Rain Test Apparatus, Immersion Tank, Jet Nozzle, Atomized Water Nozzle, Salt Fog Chamber,, Tensile Strength Tester, Thermocouple Reader, 18kg Weight, 1.35kg Impact Weight, s Concrete Page 3 of 12
5 Wet Locations Sec Rain Sec Immersion UL 1598 Luminaries Rain Test Apparatus, Immersion Tank Outdoor Use UL 73 Motor Operated Appliances Rain Test Apparatus Sec. 49 Water Spray Test UL 1278 Movable and Wall or Ceiling Hung Electric Room Heaters Rain Test Apparatus Sec. 38 Water Spray Test UL 507 Electric Fans Rain Test Apparatus (-100 to 200) C (0 to 99) % RH Sec , (F) Sec , (G) Salt Spray (Fog) Sec High Humidity Sec High Temp/Thermal Shock Sec Rain Intrusion Sec & Water Intrusion Sec Lawn Sprinklers Sec. 4.3 Salt Spray Atmosphere Sec Explosive Atmospheres Small Parts (Choke Hazard) Sharp Edges Sharp Points Multiple Standards or Customer Request MIL-STD-810 F MIL-STD-810 G ASTM B117 GR-63-CORE GR-487-CORE SAE J1455 UL/CSA/EN/IEC ASTM F963-11; CFR 1501 SOR ; 7, 30, S1 M00.1(4) ISO ; 4.4,5.2 EN71-1; 8.2 ASTM F963-11; CFR M00.2(4) ISO ; 4.6,5.8 EN71-1; 4.7,8.11 ASTM F963-11; CFR M00.3(4) ISO ; 4.7,5.9 EN71-1; 8.12 Temperature and Humidity Department of Defense Test Standard for Environmental Engineering Considerations and Laboratory Test Standard Practice for Operating Salt Spray (Fog) Apparatus NEBS Requirements: Physical Protection Generic Requirements for Electronic Equipment Cabinets Surface Vehicle Recommended Practice Resistance to Impact Test Temperature and Humidity Recorder, Environmental Chambers Salt Fog Chamber, Immersion Tank Salt Fog Chamber Environmental Chambers, Oven, Thermocouple Reader Rain Test Apparatus, Immersion Tank, Salt Fog Chamber, 25mm/1kg sphere Hardened steel base Choke Hazard Tester Sharp Edge Tester Sharp Point Tester SPT-1000 Page 4 of 12
6 Accessibility Drop Test (Impact Test) Flexure Test Torque test for removal of components Tension test for removal of components Tension test for seams Compression test ASTM F963-11; ISO ; 5.7 EN71-1; 8.10 ASTM F963-11; CFR (b) M01.1(5.4) ISO ; EN71-1; 4.5,8.5 ASTM F963-11; CFR (d) ISO ; 4.9, EN71-1; 8.13 ASTM F963-11; CFR (e) ISO ; EN71-1; 8. 3 ASTM F963-11; CFR (f) M01.1(5.5) ISO ; EN71-1; 8.4 ASTM F963-11; 4.27,8.9.1 ISO ; EN71-1; ASTM F963-11; CFR (g) ISO ; EN71-1; 8.8 Bite Test 16 CFR (c) Leakage of liquid-filled toys Tire Removal and snap in axle tension/compression Test with Locking Mechanisms and Hinges ISO ; 4.24,5.19 EN71-1; 5.5,8.15 ASTM F963-11; 8.11 ASTM F963-11; 4.13, 8.25 SOR 2011/17; 14 Child Finger Probes Scale Impact Medium Flexure Tester Torque Wrench Seam Clamp Feeler Gauge Attachment Seam Clamp Feeler Gauge Attachment Rigid metal disc attachment Bite Test Clamp Puncture Tester Stopwatch Cobalt Chloride Paper Temp/Humidity Chamber Wire Hook Rigid Plate Weights Sharp Point Tester Sharp Edge Tester Page 5 of 12
7 Security of attached eyes and noses to Dolls, Plush, and Soft Simulated Protective Devices (Masks, Helmets, Etc) Pacifiers, Rattles, Teethers, Squeeze (Geometric Shape of Certain ) Preschool Play Figures Small Balls and Suction Cups PomPoms Hemispheric-Shaped toys SOR 2011/17; 31, S4 M01.2 ASTM F963-11; , ISO ; 4.14,5.14, EN71-1; ASTM F963-11; 4.20,4.22,4.23, CFR 1510,1511 SOR ; 40, S8 ISO ; 4.5,5.3 EN71-1; 5.8,8.16 ASTM F963-11; ISO ; 4.5.4,5.6 EN71-1; 5.11,8.33 ASTM F963-11; CFR (a)(17) ISO ; 4.5.2,5.4 EN71-1; 5.10,5.13,8.32 ASTM F963-11; 4.35, 8.16 ISO ; 4.5.3,5.5 ASTM F963-11; 4.36 ISO ; EN71-1; 5.12 with nearly Spherical Ends ASTM F963-11; 4.32 Jaw Entrapment in handles and steering wheels Tests for toys with shaft-like handles Springs Spring Wound Driving Mechanisms Weights Claw Hook Discs Stopwatch Test Stand Steel Ball Multiple Equipment Items Rattle Test Fixture Supplemental Test Fixture Rattle Test Fixture Supplemental Test Fixture Small Ball Test Fixture Torque Wrench Seam Clamp Small Ball Test Fixture Optical Comparator Supplemental Fixture Scale / ASTM F963-11; 4.39 Jaw Entrapment Fixtures SOR 2011/17; 37 ASTM F963-11; ISO ; 4.14 EN71-1; SOR 2011/17; 15(d) Perimeter of Cords and Chains EN71-1; 8.36 s Ruler/ Child Test Finger Test Blocks Head Probe Page 6 of 12
8 Tests for Loops, Cords, and Elastics ASTM F963-11; 4.14, 8.22 SOR 2011/17; 41 ISO ; 4.11,5.11 EN71-1; 4.13,5.4,8.19,8.20 Weights Head Probe Hook Test Fixture Breakaway feature separation test EN71-1; 8.38 Self-retracting cords EN71-1; 8.39 Length of cords, chains, and electrical cables comprising monofilament fibers Plastic Film/Sheet Thickness with Accessible Wires or Rods Containing Nails and Fasteners 1 kg weight EN71-1; 8.40 EN71-1; 5.9 ASTM F963-11; 4.12, 8.21 SOR 2011/17; 4 M03(4) ISO ; 4.10,5.10 EN71-1; 4.3,5.3,8.25 ASTM F963-11; 4.10 ASTM F963-11; 4.11 SOR 2011/17; 28 Toy Closures and Ventilation ASTM F963-11; 4.16 Toy Clearance ASTM F963-11; 4.18 Tip Over Test Stability of Stationary Floor ASTM F963-11; CFR (b)(4) ISO ; ASTM F963-11: Tumble Test for Wheeled ASTM F963-11; Ride on Stability Test ASTM F963-11; 8.15 Overload of ride on toy seats ASTM F963-11; 8.26 Micrometer Angle Meter Multiple Equipment Items Accessibility Probes s Scale Impact Medium Angle Meter Scale Scale Wooden Steps Angle Meter Weights Weights Page 7 of 12
9 Dynamic Strength Test for wheeled ride on toys ASTM F963-11; 8.20 Wheels, Tires, and Axles ASTM F963-11; 4.17 Intended to be Attached to a Crib or Playpen Weights Stopwatch Sharp Edge Tester Sharp Point Tester Choke Hazard Tester ASTM F963-11; 4.26 Inspection Projections ASTM F963-11; 4.8 Inspection Use and Abuse Testing ASTM F963-11; 8.5,8.6 Washer/Dryer Multiple Equipment Items Creepage & Clearance Distances Electrical s, Strain Relief Test Electrical Stability Test Impact Test Enclosure Push Test Pull Test Permanence of Marking Weight Loading Test Electrical and Electrical and Electrical and Electrical and Electrical and Electrical and,, Stop Watch Angle Meter, Probes, Impact Ball, Impact Hammer, 50 mm sphere,, Probes, Stop Watch, Stop Watch, Tape Measure Mold Stress Test Plastics Lab Oven Ball Pressure Test Plastics Lab Oven, Ball Pressure Tester, Ball Pressure Test Stand, Thermocouple, Thermocouple Meter Page 8 of 12
10 Flame Tests 3/4 Inch, 20 mm, 5 Inch, 127 mm, Horizontal Burn: HB Vertical Burn: V-0, V-1, V-2, 5VA, 5VB, 50W, 500W Plastics Flame Hood, Gas Supplies, Gas Flow Meter, Manometer/Pressure Gauge, Bunsen Burners, Needle Flame Burner, Flame Calibration Blocks, Flame Calibration Gauges, Burner Test Stand, Burner Wing Tips, Burner Angle Blocks, Wire Gauze & Screens, Stop Watch Glow Wire Test Plastics Glow Wire Tester Hot Wire Ignition Test Plastics Electrical,, Chemical and Environmental Tests per the selected Standard and in accordance with the Test Plan for the Equipment Under Test. Electrical,, Chemical and Environmental Tests per the selected Standard and in accordance with the Test Plan for the Equipment Under Test IEC (2005); IEC :2005+A1:2009; EN (2006); EN : A11:2009; EN : A1:2010; AS/NZS (2003); ANSI/UL (2007); CAN/CSA C (2007) IEC (2001); IEC :2010 EN (2001); EN :2010 UL (2008) CAN/CSAC22.2 No (2004) ITE Measurement Control and Lab Use Hot Wire Ignition Tester Hot Wire Ignition Tester Power Supply Digital Multimeter, Dielectric Tester, Leakage Current Meter, Ground Continuity Tester force gauge, power meter, Oscilloscope, ammeter temperature / humidity meter, pressure and vacuum gauge, scale, data logger, oven creepage and clearance tools, stopwatch, measuring tape Digital Multimeter, Dielectric Tester, Leakage Current Meter, Ground Continuity Tester, force gauge, power meter, Oscilloscope, ammeter temperature / humidity meter, pressure and vacuum gauge, scale, data logger, oven creepage and clearance tools, stopwatch, measuring tape Page 9 of 12
11 Electrical,, Chemical and Environmental Tests per the selected Standard and in accordance with the Test Plan for the Equipment Under Test Electrical,, Chemical and Environmental Tests per the selected Standard and in accordance with the Test Plan for the Equipment Under Test IEC :1988+ A1: A2:1995; IEC :2005 EN : A1: A2:1995; EN :2006; UL (2006); AAMI ES :2010 IEC :2005 +A1:2008 EN : A1:2009 Medical Equipment Machinery Digital Multimeter, Dielectric Tester, Leakage Current Meter, Ground Continuity Tester, force gauge, power meter, Oscilloscope, ammeter temperature / humidity meter, pressure and vacuum gauge, scale, data logger, oven creepage and clearance tools, stopwatch, measuring tape Digital Multimeter, Dielectric Tester, Insulation Resistance Tester, Ground Continuity Tester,, Oscilloscope, Ammeter, Protractor,, Measuring Tape, Electrical,, Chemical and Environmental Tests per the selected Standard and in accordance with the Test Plan for the Equipment Under Test Permanence of Marking Weight Loading Test Mold Stress Test, Ball Pressure Test Humidity Conditioning Test Electrical,, Chemical and Environmental Tests per the selected Standard and in accordance with the Test Plan for the Equipment Under Test EN :2002 +A14:2010 IEC :2001 +A2:2006 UL (2006) EN60065:2002 +A2:2010 IEC60065:2001 +A2:2010 UL60065 (2004) Household & Similar Electronics Audio, Video and Similar Electronic App. Digital Multimeter, Dielectric Tester Leakage Current Meter, force gauge, power meter, Oscilloscope, ammeter, temperature / humidity meter, pressure and vacuum gauge, scale,data logger, oven, creepage and clearance tools,stop-watch, measuring tape Digital Multimeter, Dielectric Tester Leakage Current Meter, force gauge, power meter, Oscilloscope, ammeter temperature / humidity meter, pressure and vacuum gauge, scale, data logger, oven creepage and clearance tools, stopwatch, measuring tape Page 10 of 12
12 Electrical,, Chemical and Environmental Tests per the selected Standard and in accordance with the Test Plan for the Equipment Under Test Thermal Shock IEC 529, EN60529 Amendment 1: Section 13.2 & Section 14.2 Low Temperature Thermal Shock General (Enclosures) Accessibility Probes, Dust Test Chamber, Drip Box System Oscillating Spray Test System, Handheld Spray Tester, Jet Nozzle Kit, High Flow Rate Water Delivery System with Water Tanks, s, High Pressure, High Temperature Spray Test System HALT Chamber Thermocouple[JW1] High Temperature Thermal Shock Temperature and Vibration Cyclic Temperature Thermal Shock HALT-HASS Processes and Implementation HALT Chamber Thermocouple Accelerometer[JW2] Electrical Oscilloscope, DMM, Power Input (Standards) Electrical Analyzer Leakage Current (General, North America) Electrical DMM, Leakage Current Meter Harmonized Standards, 60950, Leakage Current 61010, ITE, Laboratory, Household DMM, Leakage Current Meter Medical Leakage Current Medical Equipment DMM, Leakage Current Meter Data Logger, Measuring Tape, Temperature Rise Thermocouple Method Electrical DMM Data Logger, Measuring Tape, Temperature Rise Change of Resistance Method DMM. COR Tester Page 11 of 12
13 Electrical Dielectric Voltage Withstand Dielectric Voltage Withstand VAC VDC Insulation materials, Electrical products, Circuit Boards Insulation materials, Electrical products, Circuit Boards Grounding Continuity Test Amps Electrical Voltage Measurements AC & DC 0-600V Electrical Hi-Pot (Dielectric) Tester, Stop Watch Hi-Pot (Dielectric) Tester, Stop Watch GC Tester, DMM, Clamp-on Meter DMM Current Measurements 0-400A Electrical Ammeter Insulation Resistance Test Capacitor Discharge Test Abnormal Operation Transformer Fault Testing 0->2KMΩ Mains Voltage 0-300VAC Decay Voltage 0-425VDC Component Fault, Locked Rotor, Short Circuit, Blocked Vents, Overload Current Short Circuit Test Overload Test Insulation and Electrical Electrical Electrical Transformers and Electrical IR Meter Oscilloscope Data Logger, Measuring Tape, DMM, Power Analyzer, Hi-Pot (Dielectric) Tester, Tissue Paper, Cheese Cloth DMM Note: 1. This scope is formatted as part of a single document including Certificate of Accreditation No. AT Page 12 of 12
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 611 Dream Valley Road Rogers, AR 72756 Chessie Koko Phone: 479-636-8782 MECHANICAL Valid To: May 31, 2018 Certificate Number:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES (FAR EAST), LTD Unit 703-704 7 th Floor, Riley House 88 Lei Muk Road Kwai Chung, Hong Kong David Chung Phone: (852) 242-37161
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 APPLIED TECHNICAL SERVICES, INC. 1049 Triad Court Marietta, GA 30062 Cathy Mansfield Phone 770 423 1400 cmansfield@atslab.com MECHANICAL Valid To: June 30,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MABAMEX S.A. DE C.V. Blvd. El Refugio #25551 Florido 1 Seccion Tijuana, Baja California, MEXICO C.P. 22237 Galia Frez Phone: 011 52 664 627 8055 MECHANICAL
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Energy Assurance, LLC 5202 Belle Wood Court,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Schatz Energy Research Center Humboldt State
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TTL LABORATORIES - A DIVISION OF 41 Illinois Avenue Warwick, RI 02888-3007 Ben Miranda Phone: 401 562 1333 MECHANICAL Valid To: March 31, 2019 Certificate Number:
More informationUL Quality Assurance Private Limited, A-12,Sector-34, Infocity Phase-1,Gurgaon; Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 22 I. TEXTILE MATERIALS 1. Textile- Fabric/Garment Tensile Strength Strip test BS EN ISO 13934-1: 2013 EN ISO 13934-1: 2013 ISO 13934-1: 2013 ASTM D5035 2011 AS 2001.2.3.1:
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MONTOI, S.A. DE C.V. Libramiento Noreste Km.27 Escobedo, CP 66052 Nuevo Leon, Mexico Rodolfo Caballero Phone: 52-818154030 Email: Rodolfo.Caballero@Mattel.com
More informationSeptember 16, 2016 VIA . UL Verification Services Inc. Arthur Rumpf 1559 King Street Enfield CT 06082
September 16, 2016 VIA EMAIL UL Verification Services Inc. Arthur Rumpf 1559 King Street Enfield CT 06082 Re: Extension for ISO/IEC 17025: 2005 accreditation Dear Arthur: This letter is to inform you that
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate
More informationSýnishorn. Part 1: Safety of toys. Safety aspects related to mechanical and physical properties
INTERNATIONAL STANDARD ISO 8124-1 Fourth edition 2014-12-15 Safety of toys Part 1: Safety aspects related to mechanical and physical properties Sécurité des jouets Partie 1: Aspects de sécurité relatifs
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Larry Brooks (QA Manager) Phone: 630 495 9770 ext. 166 Email: lbrooks@elitetest.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Stephen Laya (QA Manager) Phone: 630 495 9770 ext. 119 Email: sglaya@elitetest.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
More informationTESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC , Edition 3.0
TETING AND MEAUING EQUIPMENT/ALLOWED UBCONTACTING IEC 61010-1, Edition 3.0 equired May be subcontracted, see OD 2012 F pecialized Facility, see IECEE 02-2 W Witness testing in the categories MED and MEA
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that has been assessed by ANAB and meets the requirements
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2018 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com
More informationRe: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT , ACT & AT
October 17, 2017 VIA EMAIL Link Engineering Company Jim Villella 401 Southfield Road Dearborn, MI 48120 Re: Extension for ISO/IEC 17025: 2005 accreditation Certificates #ACT-1997, ACT-1997.01, ACT-1997.02
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2016 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Chessie Koko Phone: 479 286 2300 MECHANICAL Valid To: September 30, 2018
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Garber Metrology Weighing Solutions & Precision
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD CANADA INC. 1229 Ringwell Drive Newmarket, Ontario, Canada, L3Y 8T8 William (Mac) Elliott Phone: 813 284 2736 melliott@tuvam.com www.tuv-sud.ca ELECTRICAL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTINENTAL AUTOMOTIVE SYSTEMS 570 Capital Drive Lake Zurich, IL 60047 Mr. Ken Klimek (Authorized Representative) Phone: 847-862-0131 Email: ken.klimek@continental-corporation.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 2601 SE Otis Corley Drive Bentonville, AR 72712 Stephanie Anderson Phone: 479 286 2376 MECHANICAL Valid To: September 30,
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2013 Certificate Number: 2563.02
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2019 Certificate Number: 2563.02
More informationClause Measurement/testing Testing / measuring equipment / material needed Subcontracting. 3 General requirements None -
IECEE OD-5003-1:2015 IEC 2015 1 TETING AND MEAUING EQUIPMENT/ALLOWED UBCONTACTING IEC 60730-2-5:2013-11, Edition 4.0 Automatic electrical controls for household and similar use Part 2-5: Particular requirements
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
More informationNOT SPECIFIED. TESTS CONDUCTED: AS REQUESTED BY THE APPLICANT, FOR DETAILS REFER TO ATTACHED PAGE(S)
NUMBER: SZHJ094788 APPLICANT: DATE: Jan 15, 2007 SAMPLE DESCRIPTION: ONE (1) SET OF SUBMITTED SAMPLE SAID TO BE : ITEM ME EVA INTERLOCKING PUZZLE MAT (EVA INTERLOCKING FLOOR MAT). LABELLED AGE GROUP PACKAGING
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationPROVIDING ACCURATE DATA IN A TIMELY MANNER
PROVIDING ACCURATE DATA IN A TIMELY MANNER 248 Hughes Lane St. Charles MO 63301 Ph. (636) 949-5835 Fax (636) 723-5835 www.elteklabs.com MATERIAL PROPERTIES LAB TRACKING TESTS TEST METHOD UL 746-A Section
More informationClause Measurement/testing Testing / measuring equipment / material needed Subcontracting. 3 General requirements None -
IECEE OD-5003-1:2015 IEC 2015 1 TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING, Edition 5.0 Automatic electrical controls Part 1: General requirements POVISIONAL equired S May be subcontracted, see
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationTEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationWelcome to Garber C O R P O R AT E O V E R V I E W
CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope
More informationBATTERY CHARGERS NO. 3
Date: January 10, 1992 BATTERY CHARGERS NO. 3 To: Subject: Manufacturers of Commercial/Industrial Battery Chargers Expansion of CSA Certification Service for Power Supplies to Include Low Voltage, Outdoor
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALDINGER COMPANY 1440 Prudential Drive Dallas, TX 75235 Timothy R. Detten Phone: 214 638 1808 CALIBRATION Valid To: July 31, 2018 Certificate
More informationProduct Data Sheet DV5214 NU
The engineer's choice DV5214 NU INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical Operating
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationGeneral information about motor protection
Application guide General information about motor protection Typical construction of a motor starter Disconnect Switch UL 98 - UL489 CSA C22.2 # 4 CSA C22.2 # 5 Fuses SIRCO Non-Fusible Disconnect Switch
More informationIEC , 1 Ed. ( ) TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
IEC YTEM FOR CONFIRMITY TETING AND COMMITTEE OF TETING LABORATORIE IEC 62368-1, 1 Ed. (2010-01) TETING AND MEAURING EQUIPMENT/ALLOWED UBCONTRACTING R = Required to be at Lab = May be subcontracted W =
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia
More informationACCREDITED LABORATORY
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY AKRON RUBBER DEVELOPMENT LABORATORY, INC. Akron, OH for technical competence in the field of Mechanical Testing
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01
More informationProduct Data Sheet 632 NU-006
The engineer's choice 632 NU-006 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DURHAM HOLDINGS CORPORATION INC. DBA MME TESTING 1039 Industrial Court Suwanee, GA 30024 Danny Collazo Phone: 678 730 2000 MECHANICAL Valid To: October 31,
More informationServices Transport and PackagingTests Optimizationof Packagings Environmental Simulation Tests, Design Testing IP-Testing Packaging Validation and Pac
Accredited Test Lab for Environmental and Transport Simulation Tests HAMBURG BERLIN OCHSENHAUSEN CH-NEUHAUSEN Services Transport and PackagingTests Optimizationof Packagings Environmental Simulation Tests,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY CONTROL SERVICES, INC. 2340 SE 11 th Avenue Portland, OR 97214 George Cahill Phone: 503 236 2712 CALIBRATION Valid To: September
More informationClause Measurement/testing Testing / measuring equipment / material needed Subcontracting. 3 General requirements None -
IECEE OD-5003-1:2015 IEC 2015 1 TETING AND MEAUING EQUIPMENT/ALLOWED UBCONTACTING, Edition 1.0 Automatic electrical controls Part 2-22: Particular requirements for thermal motor protectors POVIIONAL equired
More informationProximity Sensors. Reference Information. Principles of Operation. Proximity Sensors
Reference Proximity Sensors Principles of Operation Inductive Proximity sensors are generally constructed with four main elements: (1) a coil and ferrite core assembly; (2) an oscillator; (3) a convertor/trigger
More informationDesign Features: User Manual. 1. PFC function. 2. LCD remote control. 3. Battery temperature sensor function.
User Manual Design Features: 1. PFC function. except BC-1215HT / BC-2407HT 2. LCD remote control. BC-1215HT / BC-2407HT 3. Battery temperature sensor function. 4. Tri-LED color indicator for different
More informationReport number: EN71 - S Date:
Pagina 1 van 9 Distelweg 88 1031 HH Amsterdam The Netherlands Tel. : +31 20 4947783 Fax : +31 20 6366131 Email: qc@koopmanint.com Report number: EN71 - S47000040-606025-1 Date: 09-06 - 2016 Age grading:
More informationPRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
More informationMenu. Home About this portal Latest updates. Print Save Resource detail Citations. Table of Contents
Menu Home About this portal Latest updates Print Save Email Resource detail Citations AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar
More informationEMC and Durability Lab, HCL Technologies Ltd., #73-74, South Phase, Ambattur Industrial Estate, Chennai
Last Amended on - Page 1 of 10 I. EMI / EMC TESTS 1. IT Products / Household / Industrial / Medical / Network Telecommunications Equipment Radiated Emission Test (RE) CISPR11:2010 BSEN 55011:2010 CISPR22:2008
More informationB BASIC HEAT TREATMENT CONSOLE
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTOLIV ASP, INC. Autoliv North America 1320 Pacific Dr. Auburn Hills, MI 48326 Warren Short 248 276 3840 warren.short@autoliv.com MECHANICAL Valid To: April
More informationProduct Data Sheet 624 NR. The engineer's choice
Product Data Sheet 624 NR Product Data Sheet 624 NR The engineer's choice Product Data Sheet 624 NR 624 NR INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data...
More informationACCELERATED CORROSION TEST CHAMBERS
ACCELERATED CORROSION TEST CHAMBERS SALT SPRAY CYCLIC ACCT CCT CASS IMMERSION TANK SATURATED HUMIDITY KESTERNICH-SO 2 UV PROHESION GRAVELOMETER www.equilamna.com SALT SPRAY Industries Served: : Paint,
More informationTest Demonstration Center for CSZ Chambers. ISO/IEC Quality Management System Korea Laboratory Accreditation Scheme (KOLAS : Testing No.
Test Demonstration Center for CSZ Chambers ISO/IEC 17025 Quality Management System Korea Laboratory Accreditation Scheme (KOLAS : Testing No. KT651) 2 3 Value Creation of Reliability 02. Signed tripartite
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018
More informationSECTION DUST COLLECTOR
PART1-GENERAL 1.1 DESCRI PTION A. Provide labor, materials, equipment and services to perform operations required for the complete installation and related Work as required in Contract Drawings. 1.2 SUBMITTALS
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Stratford Road Solihull West Midlands B90 4GW Contact: Mr C Gregory Tel: +44 (0)121 627 3225 Fax: +44 (0)121 627 4353 E-Mail: colin.gregory@trw.com Website:
More informationMICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708
FEATURES & BENEFITS Up to 7 contacts in compact design IP-67 rating, at the face (when mated) IP-67 molded cable assemblies (when mated) All plastic design is light weight Variety of standard options to
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
More informationStationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems
Stationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems Laurie Florence Principal Engineer Batteries, Fuel Cells & Capacitors Laurie.b.florence@us.ul.com 1-847-664-3782
More informationOverview V10-T1-2 V10-T1-2 V10-T1-3 V10-T1-4 V10-T1-5 V10-T1-6 V10-T1-7 V10-T1-7 V10-T1-8
Enclosed Control. Welcome............................................... Eaton Corporation........................................ Eaton Support and Service Center Capabilities.................. Technical
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationIndustrial plug-in connectors HEAVYCON EVO. efficient at a twist of the wrist
Industrial plug-in connectors HEAVYCON EVO efficient at a twist of the wrist For more efficiency in your system HEAVYCON EVO Heavy-duty plug-in connectors are established on the market and are used in
More informationSummary of HALT, IPx7 & IP69K testing for AT Series connectors
S1-15227 Rev. A1 Corp. SINE Systems Corporation 44724 Morley Drive Clinton Twp, MI 48036 Summary of HALT, IPx7 & IP69K testing for AT Series connectors IPx7 (Submersion) PASS Requirements: Acceptance conditions
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump
Pump Specifications 250 Series Submersible Sump / Effluent Pump 250_P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 250-Series Dimensional
More informationPump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump
Pump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump LE40_P1 R8/17/2017 Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE40-Series
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Torreón, Coahuila, México C.P. 27019 (Hereinafter
More informationENVIRONMENTAL TESTING
ENVIRONMENTAL TESTING Environmental Testing Foreword & Introduction Tests Heat - Cold - Climate Page 3 Thermal Shock Page 4 Low - High Pressure Page 4 Vibration Page 5 Mechanical Shock Page 6 Corrosive
More informationPump Specifications. LE50 Series ½ HP Submersible Sewage Pump
Pump Specifications LE50 Series ½ HP Submersible Sewage Pump LE50_P1 R11/16/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE50-Series Dimensional
More informationHellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION
Hellenic Accreditation System Annex F2/17 to the Certificate No. 263-5 SCOPE of ACCREDITATION of the Testing & Calibration Laboratory of LINK LAB LTD for the performance of calibrations Measurand / Spectrophotometric
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ZF GLOBAL ELECTRONICS- VALIDATION LABORATORY Carl-Spaeter-Str. 8 Koblenz, Germany 56070 Werner Dillbahner, Dipl.-Ing. (FH), (Authorized Representative) Phone:
More informationGuideline No.: E-07(201610) E-07 TRANSFORMERS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-07(201610) E-07 TRANSFORMERS Issued date: October 28,2016 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
More informationReport number: W Date:
Koopman International b.v. Pagina 1 van 9 Distelweg 88 1031 HH Amsterdam The Netherlands Tel. : +31 20 4947783 Fax : +31 20 6366131 Email: qc@koopmanint.com Report number: W17280310-448629-14 Date: 07-13
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION In terms of section 22(2) (b) of the Accreditation for Conformity Assessment, Calibration and Good Laboratory Practice Act, 2006 (Act 19 of 2006), read with sections 23(1),
More informationPump Specifications 290 Series 3/4 hp Submersible Effluent Pump
Pump Specifications 290 Series 3/4 hp Submersible Effluent Pump 290_P1 R09/7/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 290-Series Dimensional
More informationSPD50H/100H. Performance Data SPD100H SPD50H. Wholesale Products Page: Section: Performance Data Dated: April 2002 Supersedes: January 2001
Performance SPD50H/100H RPM: 3450 Discharge: 2" Solids: 3/4" Wholesale Products Page: 6130-1 Section: Performance Dated: April 2002 Supersedes: January 2001 SPD50H SPD100H The curves reflect maximum performance
More information