NOT SPECIFIED. TESTS CONDUCTED: AS REQUESTED BY THE APPLICANT, FOR DETAILS REFER TO ATTACHED PAGE(S)

Transcription

1 NUMBER: SZHJ APPLICANT: DATE: Jan 15, 2007 SAMPLE DESCRIPTION: ONE (1) SET OF SUBMITTED SAMPLE SAID TO BE : ITEM ME EVA INTERLOCKING PUZZLE MAT (EVA INTERLOCKING FLOOR MAT). LABELLED AGE GROUP PACKAGING PROVIDED NOT SPECIFIED. NO. BY APPLICANT COUNTRY OF ORIGIN CHI. : AS REQUESTED BY THE APPLICANT, FOR DETAILS REFER TO ATTACHED PAGE(S) TO BE CONTINUE AUTHORIZED BY: FOR INTERTEK TESTING SERVICES SHENZHEN LTD. BEN N.L. LIN GENERAL MAGER Testing Services Shenzhen Ltd.-TFH Division 7If., BhekouTechnology Main Building, Industrial 7th Road,Shekou.Shenzhen. China Tel (BS-755) Fax \<&~Vj 28B371 " *"" ' '- =">""

2 NUMBER: SZHJ09473 CONCLUSION: TESTED SAMPLES SUBMITTED SAMPLE SET STANDARD - U.S. ASTM F9S3-Q3 PHYSICAL AND MECHANICAL TESTS FLAMMABILITY TEST OF MATERIALS OTHER THAN TEXTILE MATERIALS TESTED SAMPLES SUBMITTED SAMPLE SET STANDARD - U.S. CFR TITLE 16 (CPSC REGULATIONS) MECHANICAL AND PHYSICAL TESTS PART (c) (6) (vi) FLAMMABILITY TEST ON RIGID AND PLIABLE SOLIDS RESULT PASS AUTHORIZED BY: FOR INTERTEK TESTING SERVICES SHENZHEN LTD. BEN N.L. LIN GENERAL MAGER Testing Services Shenzhen Ltd.-TFH Division 7 f., SheknuTechnology Main Bunding, Industrial Tin Road, Shekou. Shenzhen, C Tel: (6^755) 25B Far (B5-755) (9 PostCDOe. 5160B7

3 NUMBER: S2HJ PHYSICAL AND MECHANICAL TESTS AS PER ASTM STANDARD CONSUMER SAFETY SPECIFICATION FOR TOY SAFETY F APPLICANT'S SPECIFIED AGE GROUP FOR TESTING : OVER 3 YEARS. THE SUBMITTED SAMPLES WERE UNDERGONE THE USE AND ABUSE TESTS IN ACCORDANCE WITH THE FEDERAL HAZARDOUS SUBSTANCES ACT (FHSA), TITLE 16, CODE OF FEDERAL REGULATIONS : - TEST FHSA PARAMETER IMPACT TEST TORQUE TEST TENSION TEST COMPRESSION TEST SECTION (b) SECTION (e) SECTION (f) SECTION (g) SECTION TESTING ITEMS 4.5 SOUND-PRODUCING TOYS 4. 6 SMALL OBJECTS 4.7 ACCESSIBLE EDGES 4. 8 PROJECTIONS 4. 9 ACCESSIBLE POINTS 4.10 WIRES OR RODS 4.11 ILS AND FASTENERS 4.12 PACKAGING FILM 4.13 FOLDING MECHANISMS AND HINGES 4.14 CORDS AND ELASTICS 4.15 STABILITY AND OVER-LOAD REQUIREMENTS 4.16 CONFINED SPACES 4.17 WHEELS, TIRES AND AXLES 4.18 HOLES, CLEARANCE, AND ACCESSIBILITY OF MECHANISMS 4 X 3.0 ft 4 in -Ibf 15 Ibf 30 Ibf 4.19 SIMULATED PROTECTIVE DEVICES, SUCH AS HELMETS, HATS AND GOGGLES 4.20 PACIFIERS 4.21 PROJECTILE TOYS 4.22 TEETHSRS AND TEETHING TOYS 4.23 RATTLES 4.24 SQUEEZE TOYS Testing Services Shenzhen Ltd.-TFH Division 7/F, ShekouTechnology Main Building, Industrial 7th Road.Shekou,Shenzhen, China - """ Far Ii86-755)2583ri1("" r '-'* "" ""

4 NUMBER: SZHJ ECTION TESTING ITEMS ASSESSMENT.25 BATTERY-OPERATED TOYS.26 TOYS INTENDED TO BE ATTACHED TO A CRIB OR PLAYPEN.27 TOY CHESTS.28 STUFFED AND BEANBAG-TYPE TOYS.29 STROLLER AND CARRIAGE TOYS. 3 0 ART MATERIALS.31 TOY GUN MARKING. 32 BALLOONS.33 CERTAIN TOYS WITH SPHERICAL ENDS. 34 MARBLES.35 BALLS.36 POMPOMS.37 HEMISPHERIC-SHAPED OBJECTS LABELLING REQUIREMENT 6 INSTRUCTIOL LITERATURE 7 PRODUCER'S MARKINGS - ME OF PRODUCER/DISTRIBUTOR NO - ADDRESS NO REMARK : THE SUBMITTED SAMPLES WERE UNDERGONE THE TESTS IN ACCORDANCE WITH SECTION 8.5 THROUGH SECTION 8.18 AND 8.20 THROUGH 8.23 ON NORMAL USE, ABUSE AND SPECIFIC TESTS FOR DIFFERENT TYPES OF TOYS WHICHEVER IS APPLICABLE. P = PASS = NOT APPLICABLE THE FIL PRODUCT OR ITS PACKAGING MUST BE MARKED WITH THE ME AND ADDRESS OF THE PRODUCER OR DISTRIBUTOR AS SPECIFIED IN SECTION 7.1 OF U.S. ASTM F TESTING PERIOD : JAN 09, 2007 TO JAN 12, 2007 Testing Services Shenzhen Ltd.-TFH Division r/f., Shekel/Technology Main Building, Industrial 7th Road.Shekou.Shenzhen, Ctima Te(-(B6-7si ;?-_- c:o -:,. -.-"-. J'>.-<-118(3 PoBteode Attention is drawn to Hie terms and conditions printed overleaf. 3

5 NUMBER: SZHJ FLAMMABILITY TEST AS PER SECTION 4.2 OF THE ASTM SPECIFICATION ON TOY SAFETY F9S3-03. STANDARD CONSUMER SAFETY SAMPLE MAT (SEC) BURN RATE LIMjtT (INCH/SEC) (INCH/SEC) THE SUBMITTED TOY SAMPLE WAS TESTED, THE ABOVE RESULT ONLY SHOWED THE MOST SEVERE BURN RATE. TESTING PERIOD : JAN 09, 2007 TO JAN 12, 2007 PHYSICAL AND MECHANICAL TEST AS PER U.S. CODE OF FEDERAL REGULATIONS TITLE 16 PART , THE HAZARDS OF SHARP POINTS, SHARP EDGE AND SMALL PARTS ARE ASSESSED BOTH BEFORE AND AFTER APPLICABLE USE AND ABUSE TESTS. APPLICANT'S SPECIFIED ACS GROUP FOR TESTING : OVER 3 YEARS. AS RECEIVED NO. OF SAMPLE TEST33 SHARP SHARP POINT EDGE ( ) ( ) XA SMALL PART (1501) TENSION COMPRESS (f» ON ( (g)) KA REMARK : P - PASS = NOT APPLICABLE TESTING PERIOD : JAN 09, 2007 TO JAN 12, Testing Services Shenzhen Ud.-TFH Division 7/F.. ShekouTedinology Main Building, Industrial 7th Road,Shekou,Shenzhen, China Tel (95-7^ Fan BE 75S 258;. 11 *gpostcode 51806? Attention is drawn to the terms and conditions printed overleaf. 3

6 NUMBER-. SZHJ FLAMMABILITY TEST AS PER U.S. CODE OF FEDERAL REGULATIONS TITLE 16 PART FOR RIGID AND PLIABLE SOLIDS. BURN LENGTH I INCH) 0.5 BURN RATE LIMIT (INCH/SEC) (INCH/SEC) THE TOY SAMPLE WAS TESTED, THE ABOVE RESULT ONLY SHOWED THE MOST SEVERE BURN RATE. TESTING PERIOD -. JAN 09, 2007 TO JAN 12, 2007 END OF REPORT Testing Services Shenzhen Ltd.-TFH Division 7/F, Shekou Technology Main Building, Industrial Till Road,Shekou,Shenzhen, C Tel- (86-755) =:. : 6-;;:;«_'711S/9 Postcode 51B067