Services Transport and PackagingTests Optimizationof Packagings Environmental Simulation Tests, Design Testing IP-Testing Packaging Validation and Pac
|
|
- Gyles Miller
- 5 years ago
- Views:
Transcription
1 Accredited Test Lab for Environmental and Transport Simulation Tests HAMBURG BERLIN OCHSENHAUSEN CH-NEUHAUSEN
2 Services Transport and PackagingTests Optimizationof Packagings Environmental Simulation Tests, Design Testing IP-Testing Packaging Validation and Packaging Testing Medical Device Testing Special Tests & Life Cycle Tests Modal Analysis & Vibration Analysis Construction & Assembly of Test Equipment
3 Subsidiaries of the paconsult group
4 Test Equipment for Environmental Simulation Shock and Vibration Tests Test Equipment Frequency Amplitude Test Area 80 kn LDS Slip Table Combi 5 to3,000 Hz 4 in 1,200 mm x 1,200 mm 54 kn IMV Slip Table Combi 5 to2,600 Hz 4 in 1,000 mm x 1,000 mm 40 kn IMV Slip Table Combi 5 to2,600 Hz 3 in 750 mm x 750 mm 36 kn LDS Slip Table Combi 3 to3,000 Hz 1,5 in 750 mm x 750 mm 28 kn -RMS Slip Table Combi 3 to3,000 Hz 2 in 600 mm x 600 mm 27 kn -UD Combi + Climate 3 to3,000 Hz 1 in 700 mm x 700 mm Shock Table Avco SM ,000 Hz 0,43 m 400 mm x 400 mm
5 Test Equipment for Environmental Simulation Temperature and Climate Tests Test Equipment Temperature Volume Door Walk in Climate Cycle Chamber, CTS to+ 150 C 6,5 m² 1,200 mm x 1,200 mm Walk in Climate Cycle Chamber, WeissSB/8/20-40 to+ 85 C 6,0 m² 1,400 mm x 2,000 mm Walk in Climate Cycle Chamber, CTS CTS to+ 100 C 5,0 m² 1,200 mm x 2,000 mm Climate Cycle Chamber (various) TemperatureCycle Chamber (various) -55 to+ 180 C 2,0 m² 1,000 mm x 1,200 mm -50 to+ 200 C 2,0 m² 1,000 mm x 1,200 mm TemperatureChamber (various) + 30 to+ 200 C 1,0 m² 700 mm x 900 mm
6 Test Equipment for Environmental Simulation Constant Acceleration, IP Tests, Solar Radiation Tests, Low Pressure Test Equipment Parameter I Parameter II Parameter III Centrifuge Acceleration max. 25 g Load max. 50 kg 600 mm x 600 mm IP Tests IP1X to IP4X Pilot Wire, Test Probe Link Finger Test Bowl IP Tests IP5X and IP6X Dust Tests Talcum Powder Volume 1,000 l IP Tests IPX1 to IPX9K Shower, Spray Nozzle Flat Spray Nozzle Volume 22 m³ Solar Radiation Chamber incl. Temperature incl. Climate Volume 6.5 m³ Low Pressure Chamber 20 mbar absolute Load max. 50 kg Volume 0.5 m³
7 Test Equipment for Environmental Simulation Dust Tests, Raining Tests, Pull and Pressure Tests, Salt Spray Test, Fluid Susceptibility Test Equipment Parameter I Parameter II Parameter III Dust Chamber Dust Tests Talcum, Arizona Chamber Volume 800 l Sand Chamber Blowing Sand Siliciumdioxid Chamber Volume 500 l Pull and Pressure Equipment upto100 kn 750 mm Frequencyupto1 Hz Salt Spray Chamber Constant, Cycling up to 50 C Chamber Volume 400 l Fluid Susceptibility Wipe, Spraying Pluge Immerse RT or High Temp.
8 Test Equipment for Environmental Simulation Shaker Constant Acceleration Climate Test, Solar Radiation Test, and Low Pressure Test IP Test Salt Spray Test Shock Table
9 Test Equipment fortransport Simulation Drop Tests, Compression Tests, Impact Tests, Vibration Tests, Low Pressure Tests Test Equipment Parameter I Parameter II Drop Tester max. Load upto100 kg Drop heightrange300 mm to2000 mm Drop Hook max. Load upto250 kg Drop heightupto4,000 mm CompressionTester max. Force upto50 kn Test Area 1,250 mm x 1,250 mm InclinedImpact Tester max. Load upto500 kg Test Area 96 mm x 125 mm Mechanical Vibration System max. Load 181 kg Test Area 1,200 mm x 1,200 mm Servo-hydraulic Shaker Force up to 20 kn Test Area 1,200 mm x 1,200 mm Low Pressure Test Chamber 20 mbar absolute Load max. 50 kg Volume 0,5 m³
10 Test Equipment Transport Simulation Inclined Impact Tester Compression Tester Drop Tester Shaker Mechanical Vibration System
11 Test Equipment and Services forengineering Modal Analyses, ElectricalMeasurements, Designs oftest Equipment, AssembliesofTest Equipment Services Modal Analysis Electrical Measurement Design of Test Equipment Assembly oftest Equipment Special Tests Lab Equipment / Description Modal Hammer, Modal Shaker, M & P Measurement Current and Voltage Measurement (LabVIEW) Design and Construction of Laboratory Equipment Assembly and Modification of Lab Test Equipment Engineering and Assembly of Special Tests
12 Measuring Devices Signal processing Model-Updating Modal Shaker Modal Hammer Simulation Triangulation Laser
13 Test Equipment and Services ofmeditec Transport Simulations, Accelerated/ Real-Time Agings, Integrity Testing of Steril Barrier Systems Test Equipment Heat Chambers Climate Chamber Climate Cabinets Compression Tester Drop Table Shaker Services Accelerated Aging, acc. ASTM F1980 Real-Time Agingat 20 C und 50 % rh Climatic Pre-Conditioning, acc. ASTM D4332 for Transport Simulation Simulation Compression Force, acc. ASTM D642 for Transport Simulation Drop Test, acc. ASTM D5276 Vibration Test, acc. ASTM D4728
14 Test Equipment and Services ofmeditec Transport Simulations, Accelerated/ Real-Time Agings, Integrity Testing of Steril Barrier Systems Test Equipment Material Testing Machine Leak & Seal Strength Tester Vacuum Chamber Gurley Tester Services Peel Test, Seal StrengthTest, acc. ASTM F88/F88M and DIN EN TensileStrengthTest, acc. ASTM D882 and DIN EN ISO 527 Bubble Test, acc. ASTM F2096 Burst Test and Creep Test, acc. ASTM F1140/F1140M Bubble Emission Test, acc. ASTM D3078 Leakage Test, acc. ASTM D4991 Air Permeability, acc. ISO Air Impermeability, acc. DIN EN ISO DyeTest, acc. ASTM F1929 and ASTM F 3039 Visual Inspection, acc. ASTM F1886/F1886M and DIN EN ISO
15 Testequipment Automotive Aerospace Shipbuilding Railway Transportation Medical Devices Electronics Food Art Objects etc.
16 Accreditations
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationENVIRONMENTAL TESTING
ENVIRONMENTAL TESTING Environmental Testing Foreword & Introduction Tests Heat - Cold - Climate Page 3 Thermal Shock Page 4 Low - High Pressure Page 4 Vibration Page 5 Mechanical Shock Page 6 Corrosive
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431
More informationCLIMATE. Climate and temperature chambers.
Climate and temperature chambers. The Environmental Competence Centre has a number of climate chambers at its disposal to carry out low and high temperature tests, as well as a number of combined climate
More informationTESTS, MEASUREMENTS, ANALYSIS VIBRATION AND PRESSURE TESTS ENVIRONMENTAL AND CORROSION TESTS
, MEASUREMENTS, ANALYSIS VIBRATION AND PRESSURE ENVIRONMENTAL AND CORROSION VIBRATION AND ENVIRONMENTAL MECHANICAL RESISTANCE VZLU TEST, a.s. provides a wide range of development, qualification and serial
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Larry Brooks (QA Manager) Phone: 630 495 9770 ext. 166 Email: lbrooks@elitetest.com
More informationHuntsville- Aerospace Testing & Engineering Services Highway 20 West Huntsville, AL 35806
Huntsville- Aerospace Testing & Engineering Services 7800 Highway 20 West Huntsville, AL 35806 Facility Overview Huntsville Facility Overview Site: Total Square Footage: 92 Acres 160,000 sq. ft. of Laboratory
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Unit 1 Quatro Park Paycocke Road Basildon Essex SS14 3GH Contact: Mr E Martin Tel: +44 (0)1268 290115 Fax: +44 (0)1268 290123 E-Mail: eamonn.martin@mira.co.uk
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELITE ELECTRONIC ENGINEERING, INC. 1 1516 Centre Circle Downers Grove, IL 60515 Stephen Laya (QA Manager) Phone: 630 495 9770 ext. 119 Email: sglaya@elitetest.com
More informationCERTIFICATE of QUALITY TEST
Test lab CERTIFICATE of QUALITY TEST according to DIN 55 350-18 - 4.3.4. DAP-PL-3439.00 Test report - No. 7564 / 09 Client FALCOM Wireless Communications GmbH Gewerbering 6 98704 Langenwiesen Equipment
More informationOur test laboratory - Apparatebau Kirchheim-Teck GmbH
1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Stratford Road Solihull West Midlands B90 4GW Contact: Mr C Gregory Tel: +44 (0)121 627 3225 Fax: +44 (0)121 627 4353 E-Mail: colin.gregory@trw.com Website:
More informationIndustrial plug-in connectors HEAVYCON EVO. efficient at a twist of the wrist
Industrial plug-in connectors HEAVYCON EVO efficient at a twist of the wrist For more efficiency in your system HEAVYCON EVO Heavy-duty plug-in connectors are established on the market and are used in
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech
More informationEMC and Durability Lab, HCL Technologies Ltd., #73-74, South Phase, Ambattur Industrial Estate, Chennai
Last Amended on - Page 1 of 10 I. EMI / EMC TESTS 1. IT Products / Household / Industrial / Medical / Network Telecommunications Equipment Radiated Emission Test (RE) CISPR11:2010 BSEN 55011:2010 CISPR22:2008
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 19102 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.09.2013 to 02.09.2018 Holder of certificate: AUCOTEAM
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO. LTD. YFAI Center of Excellence Laboratory 921 East 32 nd Street Holland, MI 49423 Arnie Suigussaar Phone: 616
More informationEnvironmental Lab Tour Lab Overview
Environmental Lab Tour Lab Overview Keystone Compliance s environmental test laboratory offers a well-lit, clean, temperature-controlled environment. The lab is powered by 2,000 amps, 480 volts of electrical
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that CertifiGroup, Inc. 901 Sheldon Dr. Cary,
More informationLabthink Instruments Co. Limited http://www.labthinktestinstruments.com/ We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile
More informationCetemet, your ally for your innovative ideas
Cetemet, your ally for your innovative ideas METROLOGY Lab CLIMATE TESTS Lab WELDING AND MATERIALS Lab METROLOGY Services Metrology services 3D Digitizing for dimensional control and reverse engineering
More informationͲW>ͲϭϭϮϬϯͲϬϭͲϬϭ ͲW>ͲϭϭϮϬϯͲϬϭͲϬϮ
ͲW>ͲϭϭϮϬϯͲϬϭͲϬϭ ͲW>ͲϭϭϮϬϯͲϬϭͲϬϮ Do you know the potential and the limits of your products? Your one-stop test laboratory for environmental simulation and EMC Treo is your partner during the process of
More informationCONTINUOUS IMMERSION AND DUST TEST REPORT
Report No. :HS1404020081A Version:A CONTINUOUS IMMERSION AND DUST TEST REPORT Company Address :Taiway Electronics Components Co. :4F., No. 4, 6, 8, Lane 359, Sec. 2, Zhongshan Rd., Zhonghe Dist., New Taipei
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTOLIV ASP, INC. Autoliv North America 1320 Pacific Dr. Auburn Hills, MI 48326 Warren Short 248 276 3840 warren.short@autoliv.com MECHANICAL Valid To: April
More informationKhushboo Scientific Private Limited
+91-8048602052 Khushboo Scientific Private Limited https://www.indiamart.com/khushbooscientific/ We are a distinguished Importer, Distributor, Exporter of Scientific. These products find application in
More informationTest Demonstration Center for CSZ Chambers. ISO/IEC Quality Management System Korea Laboratory Accreditation Scheme (KOLAS : Testing No.
Test Demonstration Center for CSZ Chambers ISO/IEC 17025 Quality Management System Korea Laboratory Accreditation Scheme (KOLAS : Testing No. KT651) 2 3 Value Creation of Reliability 02. Signed tripartite
More information产品技术规范. Product Name: Product Technical Specification SMARTSTONE. No.: CPFL0002 Version: A Issued date: Page 1 of 16
Product Name: TMAP Part Number: CPF00002 Drawing Number: CPFJ0002 Page 1 of 16 CONTENTS 1. General Data 1.1. Description 1.2. Installation Guide 1.3. Maximum ratings of pressure sensor 1.4. Operating characteristics
More informationLabthink Instruments Co. Limited www.labthinktestinstruments.com We are engaged in manufacturing, supplying, and exporting a comprehensive gamut of Testing Equipment like Permeability Test, Tensile Test,
More informationTabuchi Electric Inverter Quality & Reliability Overview February 2017
Tabuchi Electric Inverter Quality & Reliability Overview February 2017 Copyright 2017 Tabuchi Electric Company of America Limited. 1 Tabuchi Corporate History & Philosophy Established in 1925, Tabuchi
More informationFoaming of Lubricating Oils (manual)
Foaming of Lubricating Oils (manual) ASTM D 892, ASTM D 6082 sequence IV, ISO 6247, DIN 51566, IP 146, JIS K2518, BS 5092 (obs.) Product group(s): User group(s): Scope: Lubricant Testing Automotive, Engine
More informationACCELERATED CORROSION TEST CHAMBERS
ACCELERATED CORROSION TEST CHAMBERS SALT SPRAY CYCLIC ACCT CCT CASS IMMERSION TANK SATURATED HUMIDITY KESTERNICH-SO 2 UV PROHESION GRAVELOMETER www.equilamna.com SALT SPRAY Industries Served: : Paint,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationHellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION
Hellenic Accreditation System Annex F2/17 to the Certificate No. 263-5 SCOPE of ACCREDITATION of the Testing & Calibration Laboratory of LINK LAB LTD for the performance of calibrations Measurand / Spectrophotometric
More informationSystems. Dynamic Test. Electrodynamic Vibration Test Systems
Systems 100 - water 120 kn cooled Electrodynamic Vibration Test Systems SW3-10480APP (100KN) SW3-10LS3-550APP (100KN) SW3-10650APP (100KN) SW3-12480APP (120KN) SW3-12LS3-550APP (120KN) Dynamic Test Technical
More informationTest report No.: VU
Department of Environmental / Vibration Engineering Test report No.: 2017-0277-VU Date of test: June - July 2017 Testers: No. of pages: 13 Applicant/ manufacturer: Test specimens: Test procedures / bases:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTINENTAL AUTOMOTIVE SYSTEMS 570 Capital Drive Lake Zurich, IL 60047 Mr. Ken Klimek (Authorized Representative) Phone: 847-862-0131 Email: ken.klimek@continental-corporation.com
More informationCyclic Corrosion Chamber C.C.T AUTO Series
Cyclic Corrosion Chamber C.C.T AUTO Series CCT 5000 AUTO image merely illustrative Cooling system image merely illustrative Specifications/ Models CCT 1300 AUTO CCT 3000 AUTO CCT 5000 AUTO Allows 7 different
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bldg 3, Rm RM6 Contact: Gareth Williams Environmental Test Centre Tel: +44 (0)1702 383589 MoD Shoeburyness Fax: +44 (0)1702 383037 Southend-on-Sea
More informationROLEC Gehäuse-Systeme GmbH Mr. Volker Borcherding Kreuzbreite 2 D Rinteln
Reg.-Nr. DAP PL 2812.00 Labor für Umwelterprobung und Werksffprüfung Telefon +49-3 41 / 4 84 32-25 Telefax +49-3 41 / 4 84 32-14 email umwelterprobung@tzoleipzig.de Technologie Zentrum Oberflächentechnik
More informationTest Master is name Synonymous, with Quality and latest products, confirming to the global1 Standards and Quality.
Introduce Our Self : Filter Test Lab First Time In India s No 1 : Third Party Filter Test Lab We would like to inform you that Test Master has open in DELHI North India. for test the complete range of
More informationVibratory Sieve Shaker AS 300 control
General Information The analytical sieve shaker AS 300 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The
More informationSystems. Dynamic Test. Electrodynamic Vibration Test Systems SW2-4445APP (40KN) SW2-5445APP (50KN) SW2-5,5LS3-445APP (55KN) SW2-7LS3-550APP (70KN)
Systems 40-70 kn air cooled Electrodynamic Vibration Test Systems SW2-4445APP (40KN) SW2-5445APP (50KN) SW2-5,5LS3-445APP (55KN) SW2-7LS3-550APP (70KN) Dynamic Test Technical subject to changes without
More informationCyclic Corrosion Test CORR Series
Cyclic Corrosion Test CORR Series CCT 1300 CORR image merely illustrative Specifications/Model CCT 1300 CORR CCT 3000 CORR CCT 5000 CORR - Mode: SALT SPRAY / SALT FOG - Mode: WATER CONDENSATION HUMIDITY
More informationBETA SWITCHES FOR HAZARDOUS AREA
BETA offers complete line of switches for (classified) hazardous locations! The BETA Switch, well known as a safety instrument, adds an extra dimension to industrial safety by having area approval up to
More informationShriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
More informationSchedule. 200 C to 400 C. 400 C to 660 C C to 800 C C to 1300 C C to 1200 C. 0 C to 1700 C. 0 C to 1700 C.
Page: 1 of 9 LABORATORY LOCATION: (PERMANENT LABORATORY) PPCALIBRATION SERVICES SDN. BHD. NO. 15, MEDAN BUKIT EMAS PUSAT PERNIAGAAN BUKIT EMAS 14000 BUKIT MERTAJAM, PULAU PINANG MALAYSIA This laboratory
More informationPressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
More informationCallisto 100. Cold Filter Plugging Point Tester
Callisto 100 Cold Filter Plugging Point Tester Cold Filter Plugging Point The Cold Filter Plugging Point (CFPP) method is used to determine the low-temperature operability of diesel fuel, biodiesel, blends
More informationIKA Mixing Laboratory kneader (measuring kneader see page 130)
IKA Mixing Laboratory kneader (measuring kneader see page 130) IKA CATALOG 00/0 Mixing Laboratory kneader HKD 0. Plunger (130), DTM 1 Digital temperature measuring device (109), LT control Circulation
More informationBrüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE
Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE 4 Aerospace For any aircraft, helicopter, space vehicle or ballistic device, reliability is the number one priority. By using our vibration test
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2019 Certificate Number: 2563.02
More informationSalt Spray Test Chamber Model SSe CASS/AASS ASTM B 368 ISO 9227 JIZ 2371
Salt Spray Test Chamber Model SSe CASS/AASS ASTM B 368 ISO 9227 JIZ 2371 Specification/Model SS600e CASS/AASS SS1000e CASS/AASS SS1300e CASS/AASS SS3000e CASS/AASS Chamber Temperature Range Ambient + 9
More informationRefrigerated incubator with Peltier technology
KT series 53 Incubators and cooling incubators Refrigerated incubator with Peltier technology The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness.
More informationCALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE PRESSURE
CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE co 2 PRESSURE www.epluse.com calibration AT the highest level The National Metrological Institute (NMI) or its Designated Institutes
More informationFlash Point Process Analyzer
Norms and standards ASTM D 56 ASTM D 93; DIN EN ISO 2719; IP 34 DIN EN ISO 13736; IP170 DIN 51755 Application The BARTEC BENKE Flash Point Process Analyzer (FPA-4) is a continuously measuring analyzer,
More informationPressure transmitters for heavy-duty applications MBS 2000 and MBS 2050
Data sheet Pressure transmitters for heavy-duty applications MBS 2000 and MBS 2050 The compact heavy duty pressure transmitters MBS 2000 and MBS 2050 are designed for use in hydraulic applications. MBS
More informationFLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS
FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS 2 4 7 8 13 16 LED 27W FLOODLIGHT LED-511 1600 12V DC 24V DC Ideal for outdoor use on construction equipment, tractors, farm machinery,
More informationDegussa Construction Chemicals (Schweiz) AG Division CONICA Technik Industriestrasse 26 CH 8207 Schaffhausen October 19, 2004
Degussa Construction Chemicals (Schweiz) AG Division CONICA Technik Industriestrasse 26 CH 8207 Schaffhausen October 19, 2004 L A B R E P O R T USSL Reference: Subject: 5928US/Kol/gl Synthetic Sports Surfacing
More informationASTM B117 Testing Quality Control
ASTM B117 Testing Quality Control ASTM B117 Testing, also known as a Standard Practice for Operating Salt Spray (Fog), is used to analyze relative corrosion for specimens of metals and coated metals exposed
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2013 Certificate Number: 2563.02
More informationCenter for Quality Engineering. Test Report No.: E0G90005
Center for Quality Engineering Order No.: E0G9 Pages: 14 Munich, Nov 30, 2011 Client: GE Intelligent Platforms GmbH & Co. KG Equipment Under Test: Wolverine 3 Manufacturer: Task: Test Specification(s):
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Environmental Engineering Department PB 500 PO Box 19 Six Hills Way Stevenage Hertfordshire SG1 2DA Contact: Mr V Patel/Mr S Warner Tel: +44 (0)1438 752857/752873 Fax: +44 (0)1438 753130 E-Mail: simon.warner@mbda-systems.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com
More informationLab Overview 2017 /
Lab Overview 2017 / 2018 www.blanc-labo.com www.labmaterials.net Incubators & Ovens Range - 30 C to + 2 000 C Capacity from 25 to 1 700 Liters Incubators // Heating - Drying Ovens Volume : 25 to 1 000
More informationPower consumption Operation At rest Wire sizing. Auxiliary switch. EMC Low-voltage directive. Non-operating temperature range 40...
echnical data sheet SM24P-S Robustline damper actuator for operating air dampers in industrial plants and in the technical building installations For air dampers up to approx..2 m 2 orque 8 Nm Nominal
More informationPressure transmitter for industrial applications Type MBS 4500
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4500 The high accuracy pressure transmitter MBS 4500 is designed for use in almost all industrial applications,
More informationTECHINCAL DESCRIPTION BIO BAN
TECHINCAL DESCRIPTION BIO BAN LAF CABINET ARTICLE DESCRIPTION CODE BIOBAN 48 00303400000 BIOBAN 72 00303500000 ST-[BIOBAN]_EN-0 Rev. 0 of 16/06/2010 Introduction Designed for the situation where is requested
More informationPressure transmitter for industrial applications Type MBS 4510
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,
More informationQA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
More informationDENKEI Technology R&D (Shanghai) Co.,Ltd. CNAS Accredited Testing Laboratory No. L3746
DENKEI Technology R&D (Shanghai) Co.,Ltd CNAS Accredited Testing Laboratory No. L3746 2017.1.26 Ver 13.1 Address: No.609, Ziri Road, Zizhu Science Based Industrial Park,Shanghai, China Tele phone: 021
More informationCFPP Process Analyzer
Norms and standards CFPP ASTM D 6371 DIN EN 116 IP 309 Application The BARTEC BENKE CFPP (CFPP-4) is suited to analyze the standardized value of Cold Filter Plugging Point (CFPP) in a process stream online
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com
More informationQuality Product and Package Testing
TM WESTPAK, INC. Locations: 83 Great Oaks Boulevard San Jose California 95119 Phone: 408.224.1300 Fax: 408.224.5113 10326 Roselle Street Suite 101 San Diego California 92121 Phone: 858.623.8100 Fax: 858.623.8101
More informationPressure transmitters for industrial applications Type MBS 4510
Pressure transmitters for industrial applications Type MBS 4510 Technical brochure Features Designed for use in severe industrial environments Enslosure and wetted parts of acid-resistant stainless steel
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01
More informationProduct data sheet. Series 210, DN (2½ - 6 ) Ordering No PE
Series 210, DN 63 160 (2½ - 6 ) Ordering No. 210..-PE06-000. Manual actuator with hand lever Advantages Three sizes available: DN 63, 100, 160 with ISO-F flanges All vacuum parts made of stainless steel
More informationElectrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V. Power consumption In operation At rest For wire sizing. Non-operating temperature
echnical data sheet SR24P-R Robustline rotary actuator for butterfly valves and rotary valves in Retrofit applications orque 18 Nm Nominal voltage AC/DC 24 V Control: Open-close or 3-point Optimum protection
More informationTechnical brochure. LTG Fans. Tangential fans Type GA 25 / TA 40. Impeller diameter 25 mm / 40 mm.
Technical brochure LTG Fans Tangential fans Type GA 25 / TA 40 Impeller diameter 25 mm / 40 mm www.ltg.net LTG Process Air Technology LTG Fans LTG Filtration Technology LTG Humidification Technology Content
More informationTechnical Data, High Power 2-way* Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Environmental Data (acc.
Technical Data, High Power 2-way* Electrical Data Operating Voltage Operating Current Contact Resistance Voltage Proof Insulation Resistance Mechanical Data 48 VDC* see derating curve 2 mω max. 1000 VAC,
More informationSIDE CHANNEL BLOWERS
SIDE CHANNEL BLOWERS RT-1 / RT-2 / RT-3 / RT-4 series 23 RT-4 / RT-5 / RT-6 / RT-7 / RT-8 / RT-9 series 24 RT-23 / RT-33 / RT-43 / RT-63 / RT-83 series 25 19 Applications Aeration Swiing pools and whirlpools
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2016 Certificate
More informationBUR-SPEC-001 F Engineering R134a R1234yf
1/23 1.0 Scope 2.0 Applicable 3.0 Responsibility 4.0 Drawings 5.0 Material 5.1 Tubing 5.1.1 Specifications 5.1.1.1 Steel 5.1.1.2 Aluminium 5.1.2 Tubing sizes 5.1.2.1 Tubing size steel or steel passivated
More informationPA-S small filter. Technical Data G 1/8
PA-S small filter PA-S small filter G 1/8 Bowl material Polyamid Head material Polypropylene Gasket material Buna-N Filter material PE 5µm, 35µm or 80µm Temperature Min./Max. C 5-50 Maximum pressure bar
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationTEST REPORT. No. 284a/14
Labor für Umwelterprobung und Werkstoffprüfung Telefon +49 (0) 3 41 / 4 84 32-25 Telefax +49 (0) 3 41 / 4 84 32-14 E-Mail umwelterprobung@tzoleipzig.de Technologie-Zentrum für Oberflächentechnik und Umweltschutz
More informationBatteries. Batteries. Accessories Guide Technical specifications are subject to change 2-27
Batteries M/A-COM portable radio battery packs are designed for safety and durability. Portable radio products that provide options for both trunked and conventional operation are for rugged use conditions
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationUniversal test stand for pneumatic components >PP200STA<
Universal test stand for pneumatic components >PP200STA< Schematic diagram: PNEUMATIC This shown construction has been designed and realised for SR Technics Developed
More informationTechnical data sheet. Technical data. Safety notes
echnical data sheet NM24P Robustline damper actuator for operating air dampers in industrial plants and in the technical building installations For air dampers up to approx..6 m 2 orque 8 Nm Nominal voltage
More information1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
More informationProduct Data Sheet 4184 NXHH
The engineer's choice 4184 NXHH INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating
More informationPressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
More informationTechnical Data, 4-way. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Environmental Data (acc. ISO 15170) Materials List
Technical Data, 4-way Cannon APD / ISO 15170 Connectors APD 4-way connectors are the original DIN72585 (now ISO 15170) versions using a 2,5 mm contact system. Designed for automotive applications they
More informationAnnex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3
Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:
More information