ͲW>ͲϭϭϮϬϯͲϬϭͲϬϭ ͲW>ͲϭϭϮϬϯͲϬϭͲϬϮ

Transcription

1 ͲW>ͲϭϭϮϬϯͲϬϭͲϬϭ ͲW>ͲϭϭϮϬϯͲϬϭͲϬϮ

2 Do you know the potential and the limits of your products? Your one-stop test laboratory for environmental simulation and EMC Treo is your partner during the process of development and qualification of aircraft parts and equipment for the aerospace industry. As one of the first laboratories ever Treo has been authorized by AIRBUS Central Entity France for qualification tests in the fields of environmental simulation and EMC tests and has been listed with its complete test spec trum according to RTCA/DO-160 and ABD0100 in the Airbus Qualified Test Method List (QTML). In the aerospace sector our customers are OEMs as well as first and second tier suppliers. Our accredited test laboratories are located in the Hamburg Metropolitan Region, one of the world s most important regions in the civil aviation industry. Member of Verband Luft- und Raumfahrtorientierter Unternehmen From specification to qualification Treo supports your product development

3 Your advantage: high-quality testing on a flexible schedule As a test laboratory accredited according to DIN EN ISO/IEC 17025:2005, we carry out tests conforming to industry standards and individual customer requirements in the fields of environmental simulation and EMC. Testing spectrum: Environmental simulation and EMC Treo Classics: Treo Specials: Vibration and shock Constant acceleration Climate and temperature Overpressure, altitude and decompression Water- and dustproofness Fluid susceptibility Salt fog Conducted emissions Conducted susceptibility Radiated emissions Radiated susceptibility Magnetic Effect Electrostatic discharge Combined tests Mechanical endurance tests Tailormade special tests Flatscreen tests Acoustic tests Prequalification tests Here are some highlights from our recent projects Inflight entertainment systems Galley and lavatory components Power supplies Ceiling lights Illumination systems Navigation lights Communication systems Monitors and displays Sensors Gaskets Pipes Valves Connectors Attachments Composite materials We test your products according to international standards and customer requirements, e.g.: MIL-STD-461 MIL-STD-810 RTCA/DO-160 RCTA/DO-313 ABD

4 Treo testing is our strength, right from the start Prequalification and engineering tests offer the advantage that potential for improvement can be identified at an early stage of the product development and therefore be implemented right away. For you, this means: high-quality products that are optimally adapted to later requirements avoidance of unnecessary steps in the development of your product and reduction of later serial costs optimal preparation for qualification tests avoidance of costs and scheduling problems due to later design changes and reviews Individual service flexible according to your demands For each challenge our team develops the optimal testing procedure: with individual testing setups that we design jointly with you with further testing methods by supervising and supporting external tests with a continuous analysis and evaluation of all tests throughout the entire testing period with short-run availability of the test reports by preparing further documents for you or providing you support in the preparation, e.g. Qualification Test Procedure (QTP) For further information, please visit our website

5 Profit from the Treo know-how Many years of experience as a service provider have turned us into a reliable partner and an innovative problem solver your provider of customized testing procedures and complete one-stop solutions. We offer the full test spectrum of components and equipment out of one hand. Environmental simulation The environmental simulation laboratory with its specialized equipment enables a broad range of simple, complex and combined test setups and procedures tailored to customer requirements. We have special test equipment for the aviation industry, like a long-stroke shaker for aerospace testing purposes, a centrifuge for crash safety sustained tests, a goniometer for aircraft attitude tests, special water chamber equipment for RTCA waterproofness tests, a unique high performance pressure chamber as well as test stands for monitor tests and mechanical endurance. EMC The EMC test laboratory carries out a broad spectrum of radiation and conduction tests and has profound experience in the field of aerospace applications. The absorber chamber, comprehensive test equipment and a large workspace offer highly flexible test options. With the recently introduced EMI measuring system TDEMI X by Gauss Instruments, we are able to accomplish emission tests from 10 Hz to 40 GHz. As the first service provider for testing solutions we use therewith the fastest system in the market. In this way, we reduce the testing time to a fraction and save our clients valuable time. For further information, please visit our website

6 Treo Labor für Umweltsimulation GmbH Tempowerkring Hamburg / Germany Edisonstraße Kiel / Germany Phone: Fax: Web: +49 (0) (0) info@treo.de ͲW>ͲϭϭϮϬϯͲϬϭͲϬϭ ͲW>ͲϭϭϮϬϯͲϬϭͲϬϮ Treo is an accredited testing laboratory by the Deutsche Akkreditierungsstelle GmbH (DAkkS) according to DIN EN ISO/IEC 17025:2005.