Center for Quality Engineering. Test Report No.: E0G90005

Transcription

1 Center for Quality Engineering Order No.: E0G9 Pages: 14 Munich, Nov 30, 2011 Client: GE Intelligent Platforms GmbH & Co. KG Equipment Under Test: Wolverine 3 Manufacturer: Task: Test Specification(s): [covered by accreditation] Test Specification(s): [not covered by accreditation] unknown Conformance test according to the test specifications mentioned below IEC Degrees of protection provided by enclosures (IP Code) Test IPX5 IEC Degrees of protection provided by enclosures (IP Code) Test IP6X Result: The tests are passed and compliant to the specifications. The results relate only to the items tested as described in this test report. approved by: Date Signature Garcia-Baglietto Lab Manager Environmental Simulation Dec 02, 2011 This document was signed electronically. The Center for Quality Engineering of SGS Germany GmbH is accredited by DAkkS for COMPONENTS TESTING ENVIRONMENTAL ENGINEERING ELECTROMAGNETIC COMPATIBILITY PRODUCT SAFETY TELECOM CONFORMANCE TESTS SGS Germany GmbH, SGS CQE, Hofmannstr. 50, D München, Phone , Fax , Internet

2 CONTENTS 1 Summary References Specifications General Information Identification of Client Test Laboratory Time Schedule Participants Equipment Under Test Test Equipment Test Facility Measuring Equipment Test Specifications and Results Test Specification Test Performance IPX5-Test IP6X-Test Test Result IPX5-Test IP6X-Test Enclosures...11 Date: Nov 30, 2011 Wolverine 3 page 2 / 14

3 1 Summary Tested Requirement(s) IEC Degrees of protection provided by enclosures (IP Code) IEC Degrees of protection provided by enclosures (IP-Code) Test Case IPX5 IP6X Remark The test is passed and compliant to the specifications The test is passed and compliant to the specifications 2 References 2.1 Specifications [1] IEC 60529: Degrees of protection provided by enclosures (IP-Code) 3 General Information 3.1 Identification of Client GE Intelligent Platforms GmbH & Co. KG Memminger Str Augsburg Philipp Hortmann 3.2 Test Laboratory Center for Quality Engineering SGS Germany GmbH Hofmannstraße München TÜV Product Service Ridlerstr München Date: Nov 30, 2011 Wolverine 3 page 3 / 14

4 3.3 Time Schedule Delivery of EUT: Nov 15, 2011 Start of test: Nov 18, 2011 End of test: Nov 22, Participants Name Function Phone Claus-Peter Finsterer Accredited testing, Editor Equipment Under Test 1 housing Wolverine 3 Pic. 1 Description of EUT: Label Date: Nov 30, 2011 Wolverine 3 page 4 / 14

5 5 Test Equipment 5.1 Test Facility The measurements were carried out in the Center for Quality Engineering SGS Germany GmbH, Department Environmental Simulation Hofmannstraße 50, München, Germany. 5.2 Measuring Equipment ID No. Equipment Type Manufacturer Specification Statu s Last Cal. Next Cal. S1383 Sun/Rain-Room Eigenbau IP Test, NEMA, UL cnn Test S5861 Stopwatch Mesotron Quartz Hanhart cal Sep 22, 2010 Sep 2012 S5389 Mass Flow Recorder Aquaflux F Krohne cal Apr 07, 2011 Apr 2012 S5422 Nozzle 6.3mm 6.3 mm QE cnn cal = Calibration, car = Calibration restricted use, chk = Check, chr = Check restricted use, cpu = Check prior to use, cnn = Calibration not necessary, ind = for indication only 6 Test Specifications and Results The test results in the report refer exclusively to the test object described in section 4 and the test period in section Test Specification Test Parameter Test Severity Reference IPX5 Internal diameter of nozzle Delivery rate Test duration Distance to EUT 6,3 mm 12 l/min 3 min 2,5-3 m IEC IP6X Dust Duration Under pressure Talcum 8 h 20 mbar IEC Date: Nov 30, 2011 Wolverine 3 page 5 / 14

6 6.2 Test Performance IPX5-Test Pic. 2 EUT at IPX5 Test Date: Nov 30, 2011 Wolverine 3 page 6 / 14

7 6.2.2 IP6X-Test Pic. 3 EUT after IP6X-Test The IP6X-Test was performed by an external laboratory Date: Nov 30, 2011 Wolverine 3 page 7 / 14

8 6.3 Test Result IPX5-Test No water penetrates in the housing (see pictures 4,5+6 ). The test is passed and conform to the specification. Pic. 4 EUT after IP5X-Test. No water penetrates in the housing Pic. 5 EUT after IP5X-Test. No water penetrates in the housing Date: Nov 30, 2011 Wolverine 3 page 8 / 14

9 Pic. 6 EUT after IP5X-Test. No water penetrates in the housing IP6X-Test The test was performed by an external laboratory (see test report chapter 7) No dust penetrates into the housing ( see pictures 7, 8+9) The test is passed and conform to the specification. Pic. 7 EUT after IP6X-Test. No dust penetrates into the housing Date: Nov 30, 2011 Wolverine 3 page 9 / 14

10 Pic. 8 EUT after IP6X-Test. No dust penetrates into the housing Pic. 9 EUT after IP6X-Test. No dust penetrates into the housing Date: Nov 30, 2011 Wolverine 3 page 10 / 14

11 7 Enclosures Date: Nov 30, 2011 Wolverine 3 page 11 / 14

12 Date: Nov 30, 2011 Wolverine 3 page 12 / 14

13 Date: Nov 30, 2011 Wolverine 3 page 13 / 14

14 Date: Nov 30, 2011 Wolverine 3 page 14 / 14