Hesitation Switch. Pushbutton Actuator. Product Description

Transcription

1 - E Series, Technical Information July 01 Contents Description Page Product Description Stards Certifications Technical Data Toggle es Hesitation es Product Selection Toggle es Hesitation es Circuit rrangements ccessories Dimensions Structure Cross-Reference Toggle Pushbutton ctuator Product Description Hesitation These E switches are intended for general purpose light industrial use. Designed for retrofit OEM applications, the one-hole mounted units feature a bright nickel plated lever a 0.48"- diameter threaded bushing with a 0.08 x 0.05 inch (1.7 x 0.9 mm) deep keyway for anti-rotation. Mounting hardware, consisting of one hexagonal locknut, one knurled or hexagonal face nut, #- x /1" (where applicable) binding head terminal screw. ll are furnished unassembled in individually sealed poly bags, packed per carton. One hole with threaded 0.48"- bushing 0.08 x 0.05 inch (1.7 x 0.9 mm) deep keyway that serves as anti-rotational feature Lever s: 0.5 inch (14. mm) or 0.88 inch (17.5 mm), bright nickel plated Terminals: Screw, 0.50 inch (.4 mm) spade solder lug Hesitation es with butt action for C low voltage DC applications; maintained contacts; ideal for reversing motor applications; patented interlock mechanism prevents operation of lever through centre position until manual pressure is momentarily relieved. C Ratings:, 15V C, 50V C Max. hp at 50V C DC Ratings:, 8V DC Stards Certifications UL Recognized File No. 70 CS File No. LR4008 Technical Data Toggle es C Ratings:, 15V C, 50V C Max. 50V C DC Ratings:, 8V DC /s:, 4, double throw only One pole with threaded 0.48"- bushing 0.08 x inch (1.7 x 1. mm) deep keyway Lever : 0.87 inch (17.4 mm), stainless steel Terminals: Screw C Ratings:, 15V C (NO), 50V C (NO) Max. 1/ 15/50V C Electrical Life:,000 cycles make/ break at switch ampere rating with butt action for C low voltage DC applications Maintained momentary contacts /s: 1 through 4, single double throw Normally open contacts /s: Single, single double throw One hole with 0.48"- threaded bushing 0.08 x 0.05 inch (1.7 x 0.9 mm) deep keyway Two bushing heights: 11/1 inch (17.5 mm) 11/ inch (8.7 mm) utton Extensions: 17/ inch (1.5 mm) 1/4 inch (.4 mm), bright nickel plated Terminals: Screw CT.1.01.T.K

2 July 01 E Series, Toggle es - Product Selection Toggle es Table -1. Toggle es C Rated Minimum Order Quantity Pieces -Pole -Pole 4-Pole Nominal C Ratings mperes hp UP 15V 50V 50V 1/ 1 P.S.T. -Pole 1/ P.S.T. P.D.T. P.D.T. -Pole P.S.T. P.D.T. P.D.T. 4-Pole 4 P.S.T. Function Circuit 0.50 Inch (.4 mm) with Lever In Spade Terminal CENTRE DOWN 1 P.S.T. ETS ET1S EE1S ETDS ET1DS EE1DS ETES ET1ES EE1ES () () () () () ET1S ET1FS ET1HS ET1GS P.S.T. ETS ETS EES. P.D.T. ETDS ETDS EEDS P.D.T. ETES ETES EEES () () () () Price ETP ET1P EE1P See Figure -1 Circuit rrangements on Page -4. ( ) = Momentary contacts, spring return action. For pricing information, refer to the Cutler-Hammer Control & utomation Products Price & vailability Digest. ETS ETHS ETGS EES EEDS EEES EE4S EE4DS EE4ES Price ETDP ET1DP ET1EP ET1P ET1FP ET1HP ET1GP ETP ETP EEP ETDP ETDP EEDP ETEP ETP ETHP ETGP EEP EEDP EEEP Solder Lug ETL ET1L EE1L ET1DL ET1EL ETL EEL ETDL ETEL EEDL EEEL EE4L EE4DL EE4EL Price Cross-Reference Page - CT.1.01.T.K

3 -4 E Series, Hesitation es ctuators July 01 Hesitation es Table -. Hesitation es Special Purpose Minimum Order Quantity Pieces pproximate Dimensions in Inches (mm) Nominal Ratings Operation Function Circuit with Lever In mperes hp UP 8V 15V 50V 50V DC C C C CENTRE DOWN Price Thread 0.07 (1.8) x 0.05 (1.) (1.8) Maintained P.D.T. P.D.T. EESS EESS EE4SS 1.47 (7.) 1.4 (4) See Figure -1 Circuit rrangements below. For pricing information, refer to the Cutler-Hammer Control & utomation Products Price & vailability Digest. Note: Interlock mechanism prevents operation of lever through the centre position until pressure is momentarily relieved. Designed for control protection of reversing motors. Table -. Minimum Order Quantity Pieces pproximate Dimensions in Inches (mm) Nominal Ratings Contacts ushing utton Extension Typical Maximum mperes C hp Inches (mm) Inches (mm) Operating Dim. Dim. Force 15V 50V 15 NO NC NO NC 50V Price Spade Terminal 0.50 Inch (.4 mm) Price 0. (1) Thread 0.04 (1) x 0.07 (1.8) 1.1 (8.7) 1 P.S.T. NO (8.) 1/ 1 P.S.T. NO (8.) 0.5 (1.5) 0.5 (.4) 0.5 (1.5) 0.5 (.4) 0.9 lbs. EPRS EPJS 0.9 lbs. EP1RS EP1JS EPRP EP1RP 5 1/4 NO, NC (1.5) 1.0 lbs. EP1LS 1.1 (8.7) See Figure -1 Circuit rrangements below. Rated 1/4 hp at 15V, 1/ hp at 50V. Circuit rrangements SPST PDT SPDT DPST 4PST DPDT 4PDT PST Figure -1. Circuit rrangements Cross-Reference Page - CT.1.01.T.K

4 July 01 E Series, ccessories -5 ccessories Table -4. ccessories Minimum Order Quantity 0 Pieces Description Material Price Hexagon Locknut Zinc-Chromate Treated Steel ET1 Knurled Face Nut Zinc-Chromate Treated Steel ET Terminal Screws #- x /1" inding Head ET1 Spade Terminal dapter 0.50 inch (.4 mm) ssembles to s ET - Indicating Plates 0.0 inch (0.8 mm) Thick Steel, urnished Nickel Finish Vertical Orientation Horizontal Orientation ET01 ET0 0. (1) Hexagon Locknut Cat. No. ET () 0. (1) 0.07 (1.8) Knurled Face Nut Cat. No. ET 0.0 (1.5) 1.0 (5.4) (.8) (1) Cat. No. ET01 Cat. No. ET0 - Indicating Plates O FF O N Figure -. ccessories pproximate Dimensions in Inches (mm) For pricing information, refer to the Cutler-Hammer Control & utomation Products Price & vailability Digest. Dimensions Table -5. Toggle pproximate Dimensions No. Operation of pproximate Dimensions in Inches (mm) ushing Lever s Spade Terminals Solder Lug C D E C D E C D E D E C 1 Momentary & Maintained 0.47 Maintained 0.47 Momentary 0.47 Maintained Maintained (14.) 0.5 (14.) 0.5 (14.) (5.4) 1.0 (.9) 1.5 (1.8) 1.7 (.) 1. (0.5) 1.17 (9.7) 1.1 (.) 1.4 (4.0) 1.0 (.0) 0. (1.0) (.) 1.40 (5.) 1.1 (8.7) 1.19 (0.) 1.1 (.) 1.7 (4.8) 1.0 (.0) 1.1 (8.7) 1.1 (.) 1.4 (4.0) 1.4 (4.0) 0. (1.0) (.) 1.40 (5.) 1.00 (5.4) 1.0 (.9) 1.5 (1.8) 1. (1.) 1. (1.) 1.1 (8.7) 1.1 (.) 1.4 (4.0) 1.4 (4.0) 0. (1.0) (.) (.) Note: Spade terminal adapters are used on ampere, ampere momentary screw terminal switches, adding 0.4 (.7) to dimension C. Structure Table -. E ing System Not to be used for ordering purposes E 1 0 T 1 0 S = E 1 0 T 1 0 S Series Lever Ratings 15V Function Termination = Complete Cat. No. T 0.5 inch (14. mm) Lever E 0.88 inch (17.5 mm) Lever ( ) = Momentary contacts, spring return action. 1 -Pole -Pole 4 4-Pole 0 mperes mperes mperes () D - - E - - F - - () G () - - () H - - () S Screw L Solder Lug P Spade 0.5 inch (14. mm) mperes - - CT.1.01.T.K

5 - E Series July 01 Cross-Reference Table -7. Cross-Reference Cutler- Hammer mpere Eaton McGill Carling-switch rrow Hart (Crouse Hinds) ETS 7580K F ETP 7580K FTS- 800 ETDS 7581K FC4 800 ETDP 7581K FCTS ETES 758K F4 800 ETEP 758K FTS Pole mpere ETS 7590K GK4 804 ETP 7590K GK1 80 ETDS 7591K GM4 807 ETDP 7591K GM1 809 ETES 759K GL4 800 ETEP 759K GL1 80 mpere Micro ET1S 7500K F TS- ET1P 7501K F5TS- 1-P 11TS95- ET1L 7501K F TS1- ET1DS 750K FC TS-1 ET1DP 750K FC5TS- 8-P 11TS95-1 ET1DL 750K FC5-8 11TS1-1 ET1ES 7504K F TS- ET1EP 7505K F5TS- 85-P 11TS95- ET1EL 7505K F TS1- ET1S 750K F54-87 ET1P 750K 9-00 F5TS- 871-P ET1FS 7508K 9-01 FC ET1FP 7508K8 9-0 FC57TS- 875-P ET1HS 75K F ET1HP 75K F5TS- 879-P ET1GS 7509K FC54-87 ET1GP 7509K FC5TS- 877-P -Pole mpere ETS 750K GK54-8 1TS- ETP 751K GK51-87-P 1TS95- ETL 751K GK TS1- ETDS 75K GM TS-1 ETDP 75K GM51-89-P 1TS95-1 ETDL 75K GM TS1-1 ETES 754K GL54-8 1TS- ETEP 755K GL P 1TS95- ETEL 755K GL TS1- ETHS 7570K GL5E- 878 ETHP 7570K GL5-879-P Cutler- Hammer -Pole mpere Eaton McGill Carling-switch rrow Hart (Crouse Hinds) EES 7700K HK EEP 7700K HK P EEL 7700K HK EEDS 7701K HM EEDP 7701K HM P EEDL 7701K HM EEES 770K HL EEEP 770K HL P EEEL 770K HL Pole mpere EE4S 790K IK EE4L 791K IK EE4DS 79K IM EE4DL 79K IM EE4ES 794K IL EE4EL 795K IL EPRS 844K 0 PG-018--C EPRP 844K 05 PG-0--C EPJS 844K4 0 PG-018--C EP1RS 844K EP1RP 844K 05 F EP1JS 8444K4 0 F754 DR 17 EP1LS 844K 170 PG-08--C Micro CT.1.01.T.K