SWITCHES SECTION. Fuse Holders. Toggle Switches - Screw Terminals. Fuses. Toggle Switches - Blade Terminals. Terminal Block - Junction Box

Size: px

Start display at page:

Download "SWITCHES SECTION. Fuse Holders. Toggle Switches - Screw Terminals. Fuses. Toggle Switches - Blade Terminals. Terminal Block - Junction Box"

Bernice Stokes
5 years ago
Views:

1 SWITCHES Toggle - Screw s Toggle - Blade s Toggle (arine) - Blade s Lighted Toggle (arine) Contura III Rocker (arine) Toggle - icro Switch Key Switch Push-Pull Switch Push Button Switch Weatherproof Boots Toggle Extension Toggle Guards Fuse Holders Fuses Block - Junction Box Dual Battery Selector & Disconnect Switch Battery aster Switch Relays Solenoids Hour eters Face Nuts Breakers 1

THE BIGGEST SINGLE NAE IN SWITCHES 15/-UNS-A.7(1.8).08(.965) DP.465(11.81) 15/-UNS-A.08(.965) DP.465(11.81) 15/-UNS-A.08(.965) DP.465(11.81).670(17.0).778(19.76).80(0.40).4(10.7).4(10.7).48(8.84) 1.

2 THE BIGGEST SINGLE NAE IN SWITCHES 15/-UNS-A.7(1.8).08(.965) DP.465(11.81) 15/-UNS-A.08(.965) DP.465(11.81) 15/-UNS-A.08(.965) DP.465(11.81).670(17.0).778(19.76).80(0.40).4(10.7).4(10.7).48(8.84) 1.14(8.80).64(16.10) 1.08(.).750(19.05) 1.08(.) 1.46(6.47) SWITCH TYPES: FA5478 S.P.S.T OFF - ON S.P.S.T = Single Pole, Single Throw switches control a single wire circuit. S.P.D.T = Single Pole, Double Throw switches control two single wire circuits permitting only one circuit to be energized at a time. D.P.S.T = Double Pole, Single Throw switches control two circuits simultaneously. s are ON at the same time, OFF at the same time and may be of different voltages from separate sources. D.P.D.T = Double Pole, Double Throw switches control four circuits, permitting only two circuits to be energized at a time. Toggle Screw s 6FC5478 S.P.D.T S.P.S.T S.P.D.T D.P.S.T D.P.D.T (ON) - OFF - (ON) FC5478 S.P.D.T ON - OFF - ON ( ) Indicates omentary Action 6GO5S78 FWD REV D.P.D.T (ON) - OFF - (ON) ( ) Indicates omentary Action 4 THE BIGGEST SINGLE NAE IN SWITCHES 15/-UNS-A.08(.965) DP 15/-UNS-A.08(.965) DP.465(11.81).465(11.81).670(17.0).670(17.0) 1.14(8.80).64(16.10) 1.14(8.80).64(16.10).48(8.84).48(8.84) FA5178 S.P.S.T OFF - ON 6FC5178 S.P.D.T (ON) - OFF - (ON) ( ) Indicates omentary Action Toggle Blade s FC5178 S.P.D.T ON - OFF - ON G5178 D.P.D.T ON - OFF - ON 6 GO57 D.P.D.T FWD - OFF - REV 4

s are ON at the same time, OFF at the same time and may be of different voltages from separate sources. D.

3 THE BIGGEST SINGLE NAE IN SWITCHES SWITCH TYPES: S.P.S.T = Single Pole, Single Throw switches control a single wire circuit. S.P.D.T = Single Pole, Double Throw switches control two single wire circuits permitting only one circuit to be energized at a time. D.P.S.T = Double Pole, Single Throw switches control two circuits simultaneously. s are ON at the same time, OFF at the same time and may be of different voltages from separate sources. D.P.D.T = Double Pole, Double Throw switches control four circuits, permitting only two circuits to be energized at a time. 15/-UNS-A.08(.965) DP.79(9.6).865(1.97).4(10.7) S.P.S.T S.P.D.T D.P.S.T D.P.D.T 1.75(4.9).750(19.05) Toggle (arine) Blade s GA51 S.P.S.T ON - OFF LT1511- S.P.D.T OFF - ON NOTE: Black Bat THE BIGGEST SINGLE NAE IN SWITCHES Lighted Toggle (arine) Blade s - Nylon Bat with Red Tip Light 15/-UNS-A LT511-R D.P.S.T OFF - ON 6.79(9.6) NOTE: Silver Bat.74(6.96) DIA.08(.965) DP.715(18.16).865(1.97).4(10.7) 1.75(4.9).750(19.05) SINGLE POLE.168(4.7) DIA LENS.890(.61) 1.088(7.64) DOUBLE POLE NOTE: Red lens will be shipped unless Green is specified LT561-R D.P.D.T ON - OFF - ON 8

.940(.87).080(.0) 1.479(7.57).505(1.8).50(6.5).960(4.8) 8 1 10 7 4 5 6 9 8 TERINAL BASE W/O BARRIERS.80(0.8).960(4.8) 10 TERINAL BASE W/BARRIERS BOTTO VIEW TERINAL ARRANGEENT 10 TERINAL BASE Contura III Rocker (arine) Lighted Single Pole V1D1B S.

Switch should be mounted at 90 for maximum water shedding (45 to 90 acceptable) *Angled comers are suggested for optimum fit. Standard rectangular cutout is acceptable. 15º0'±º0' 1º±7º TOTAL TRAVEL.

4 .940(.87).080(.0) 1.479(7.57).505(1.8).50(6.5).960(4.8) TERINAL BASE W/O BARRIERS.80(0.8).960(4.8) 10 TERINAL BASE W/BARRIERS BOTTO VIEW TERINAL ARRANGEENT 10 TERINAL BASE Contura III Rocker (arine) Lighted Single Pole V1D1B S.P.D.T. OFF - ON NOTE: Other configurations and circuitry available on request OUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness:.40 min max. Switch should be mounted at 90 for maximum water shedding (45 to 90 acceptable) *Angled comers are suggested for optimum fit. Standard rectangular cutout is acceptable. 15º0'±º0' 1º±7º TOTAL TRAVEL.090 APPRO. PULLOUT TO CHANGE POSITION SEE LOCKING DETAILS FOR DESCRIPTION ("A" LOCKING INSERT SHOWN) SEALED TO PREVENT ENTRANCE OF LIQUIDS OR DUST.19 15/ - UNS- TO WITHIN.060 OF SHOULDER UNC- x.60 REF BINDING HEAD TERINAL SCREW AND LOCKWASHER (SES) ONE PER TERINAL Toggle Environment - Proof sealing qualified to il-spec-950 1TL1- S.P.S.T OFF - ON 1TL1-7 S.P.D.T (ON) - OFF - (ON) ( ) Indicates omentary Action 1TL1-1 S.P.D.T ON - OFF - ON 1TL1- S.P.D.T ON - ON SWITCH TYPES: S.P.S.T = Single Pole, Single Throw switches control a single wire circuit. S.P.D.T = Single Pole, Double Throw switches control two single wire circuits permitting only one circuit to be energized at a time. D.P.S.T = Double Pole, Single Throw switches control two circuits simultaneously. s are ON at the same time, OFF at the same time and may be of different voltages from separate sources. D.P.D.T = Double Pole, Double Throw switches control four circuits, permitting only two circuits to be energized at a time. S.P.S.T S.P.D.T D.P.S.T D.P.D.T 4

Key Switch 105 Push To Choke Position OFF - AG. GROUNDED, RUN - ACC & BATT.

Hole Chrome Plated Brass Face Nut, Silver Contacts ounting Stem 1½" Long, 1 16" Diameter Replaces

& PUSH TO CHOKE Push-Pull Switch Heavy Duty Construction 506 ON - OFF Heavy Duty Construction 6-8

5 Key Switch 105 Push To Choke Position OFF - AG. GROUNDED, RUN - ACC & BATT. - PUSH TO CHOKE Delrin, Stainless Steel Ignition w/push to Choke 6 s, Weatherproofing Seal & Drain Hole Chrome Plated Brass Face Nut, Silver Contacts ounting Stem 1½" Long, 1 16" Diameter Replaces OC #8817, 9019 & 901 OFF AGNETO GROUND RUN ACC. & BAT. PUSH TO CHOKE START ACC. - SOLENOID & BAT. & PUSH TO CHOKE Push-Pull Switch Heavy Duty Construction 506 ON - OFF Heavy Duty Construction 6-8 volts, 75 amps DC Push Button Switch Brass Construction (arine) 9000 OFF - (ON) Note Starter Switch ( ) Indicates omentary Action 5

Weatherproof Boots N0105 Toggle Switch, Rubber Boot N0400

Switch, 15 " - Thread, Boot N001 Clear Boot for 7 16"

Diameter Handle Extends Toggle to 1 7 8" Long Toggle Guards

Returns Lever to OFF Position Keyway Opposite Hinged End

6 Weatherproof Boots N0105 Toggle Switch, Rubber Boot N0400 Toggle Switch, Push Thru Style Boot N000 Push Button Switch, 15 " - Thread, Boot N001 Clear Boot for 7 16" Thread Toggle Extension N105 Fits Toggles with 15 64" Diameter Handle Extends Toggle to 1 7 8" Long Toggle Guards 8497K1 8497K 8497K1 8497K For Full Throw Single Throw Returns Lever to OFF Position Keyway Opposite Hinged End For Full Throw Single Throw Returns Lever to ON Position Keyway Opposite Hinged End 6

Fuse Holders 50145 Inline, for AGC Series Fuses, 14 Gauge Wire 50145 485

Holders with 0 amps Fuse - 1 Gauge Wire Inline ATO/ATC Fuse Holders Only

Only - 18167 No Fuse; 1 Gauge Wire; 0 amps max 5054 485 50540 Clip-on

AGC0 AGC05 AGC10-50605 50610-50705 50710 AGC 15 0 5 0 40 AGC15 AGC0 AGC5

- Junction Box 78010 10 Gang, 0 amps @ 00 volts 8641 7-way trailer

Provides a fast, simplified way of connecting wires from connector to

7 Fuse Holders Inline, for AGC Series Fuses, 14 Gauge Wire Dash ount, for AGC Series Fuses, 0 amps Fuse Inline ATO/ATC Fuse Holders with 0 amps Fuse - 1 Gauge Wire Inline ATO/ATC Fuse Holders Only No Fuse; 10 Gauge Wire; 5 amps max Inline ATO/ATC Fuse Holders Only No Fuse; 1 Gauge Wire; 0 amps max Clip-on Fuse Holder (1 Gauge) Amp Rating AGC Style Fuses ATO/ATC AT 5 10 AGC0 AGC05 AGC AGC AGC15 AGC0 AGC5 AGC AT ATO/ATC Block - Junction Box Gang, 0 00 volts way trailer junction box. Provides a fast, simplified way of connecting wires from connector to the trailer wiring. Includes hardware, 4 closed and 4 open rubber grommets for 5 8" diameter wire. External mounting flanges on 7 8" centers. 7

Dual Battery Selector & Disconnect Switch By Cole Hersee Four Positions OFF ON - BATTERY #1 ON - BOTH BATTERIES ON - BATTERY # Ratings 10 APS.

$Durable, fracture resistant, high temperature engineered plastic case, knob, and insulator.$ Can be operated through ON positions with engines running.

Can be operated through ON positions with engines running.

Three 8" diameter heavy copper stud terminals with brass nuts. ade in the U.S.A.

Battery aster Switch 87181 VF4-45F11 Waterproof, single battery master switch.

Note: aximum load (10 seconds): 1 volts, 1000 amps; 4 volts, 500 amps. aximum continuous rating: 1 volts, 50 amps; 4 volts, 5 amps.

heated rear windows, or the myriad of other equipment existing on vehicles today. Engineered to deliver superior performance over a long life.

8 Dual Battery Selector & Disconnect Switch By Cole Hersee Four Positions OFF ON - BATTERY #1 ON - BOTH BATTERIES ON - BATTERY # Ratings 10 APS. CONTINUOUS 500 APS INTERITTENT 6-6 VOLTS (DC) 750 Permit current to be carried by either of the two batteries, by two batteries simultaneously, or cuts off all current at the source. Ignition protected - Conform to U.S. coast guard safety standard, section 18,410 for ignition protection. Durable, fracture resistant, high temperature engineered plastic case, knob, and insulator. Can be operated through ON positions with engines running. (Engines must be shut down before moving to OFF position) Functions with alternators or generators. Three 8" diameter heavy copper stud terminals with brass nuts. ade in the U.S.A. ay be surface mounted or installed through a panel with a 5 16" diameter clearance hole. Flange diameter 6" and overall height 5 8". Battery aster Switch VF4-45F11 Waterproof, single battery master switch. Key is detachable, therefore, the switch also serves as an anti-theft device. Note: aximum load (10 seconds): 1 volts, 1000 amps; 4 volts, 500 amps. aximum continuous rating: 1 volts, 50 amps; 4 volts, 5 amps. Relays The best solution for full voltage applicable to head lamps, auxiliary lamps, fog horns, motors for fans, window lifters, air conditioners, heated rear windows, or the myriad of other equipment existing on vehicles today. Engineered to deliver superior performance over a long life Relays Heavy-duty, normally open 1 volts, S.P.D.T 50/0 amps. configuration #0, 85, 86, 87 & 87A. Heavily used in the marine industry VF4-45F11 Gounded 8710 Same as VF4-45F11 but WITHOUT BRACKET Solenoids Intermittent Duty volts, grounded base, S.P.S.T; One circuit OFF - ON, normally OFF; Contacts open BAT. Insulated 4059 Continuous Duty 1 volts, insulated base, S.P.S.T; One circuit OFF - ON, normally OFF; Contacts open Insulated Continuous Duty - Poly Coated 4117 Poly coated,1 volts, insulated base, S.P.S.T; One circuit OFF - ON, normally OFF; Contacts open 8

9 Hour eters Rectangular, 4-40 VDC Range, Screw ount Round, 4-40 VDC Range, Screw ount Face Nuts 4167 Knurled Ring Nut, 15 -, Thread Switch Nut - Knurled,, 15 -, Thread Breakers Thermal Breakers (etal Cover - No ounting Bracket) amps 4166 Thermal Breakers (etal and Cover - ounting Bracket) Cover Bracket etal Bracket PL 15 amps 0 amps 0 amps etal etal Bracket PL 5 amps 0 amps 0 amps etal etal amps 50 amps etal Bracket 9

Info Sheet. Listing of Cole Hersee retail packs. Littelfuse Commercial Vehicle Products PDF 105

Info Sheet. Listing of Cole Hersee retail packs. Littelfuse Commercial Vehicle Products PDF 105 Info Sheet Listing of Cole Hersee retail packs Dated August 2012 Many of our popular products are offered in see-through clamshell packaging, denoted with a BP suffix in price lists. All BP items are packed