Thank you for your interest in the Copper Battery Terminals through the farm magazine.
|
|
- Alvin Webb
- 5 years ago
- Views:
Transcription
1 Thank you for your interest in the Copper Battery Terminals through the farm magazine. We have enclosed our literature on the battery terminals and related products along with our product listing and catalog sheets. If you need any further information or need to place an order, please call our toll free 800/ Sincerely, Don Fleming DF SALES TX, LLC
2
3 BATTERY TERMINALS DIE CAST COPPER CRIMP TERMINALS * All clamps, lugs, and fasteners are tin plated twice as thick as industry standards * All clamps include tin plated 5/1" battery bolts and shoulder nuts * All clamps and lugs are made of die cast copper STRAIGHT CRIMP 90 DG RIGHT ANGLE RIGHT ELBOWS LEFT ELBOWS HDBT - 1 & 2P RA-1/0P EL-1/0P TH-1/0P HDBT - 1 & 2N RA-1/0N EL-1/0N TH-1/0N HDBT 1/0 & 2/0P RA-2/0P EL-2/0P TH-2/0P HDBT 1/0 & 2/0N RA-2/0N EL-2/0N TH-2/0N $5.25 $7.28 $7.28 $7.28 MAGNA-LUGS MagnaLugs are superior to standard tube lugs in five important ways: * Wider pads for better electrical contact * Thicker pads for greater strength * 80% thicker walls for greater conductivity and strength * MagnaLugs use same crimp settings as battery clamps, saving you time, trouble and errors * MagnaLugs exceed SAE conductivity standards ML-1-3/8 #1 3/8 STUD HOLE $3.8 ML-100-3/8 1/0 3/8 STUD HOLE $3.8 ML-100-1/2 1/0 1/2 STUD HOLE $3.8 ML-200-3/8 2/0 3/8 STUD HOLE $3.8 ML-200-1/2 2/0 1/2 STUD HOLE $3.8 ML-300-1/2 3/0 1/2 STUD HOLE $5.55 ML-400-1/2 4/0 1/2 STUD HOLE $5.85 MS-200 2/0 MAGNA SPLICE $3.75 PH. (800)
4 BATTERY TERMINALS RETRO-FIT TERMINALS *Replacement terminal for threaded stud or side terminal batteries *3/8" stud hole *Use for single termination only. Retro-Fit terminals are not stackable *Use with closed cap nuts for stud battery applications or 3/8 flange bolt for side terminal batteries RF-1 #1 TOP OR SIDE RETROFIT $ 4.50 RF-2/0 2/0 TOP OR SIDE RETROFIT $ 4.88 ST-2/0 2/0 DOUBLE BARREL RETROFIT $ STAINLESS NUT $ 2.18 STACKABLE TERMINALS *Designed for threaded stud or side terminal batteries *3/8" stud hole *Use with closed cap nuts for stud battery applications or 3/8 flange bolt for side terminal batteries *Stackable for multiple battery hook-ups *Locking teeth "bite" into battery terminal for non-rotating connection *Different cable gauges can be stacked, for example: 2/0 gauge cable between batteries and 4/0 gauge cable to starter or ground TOP OR SIDE MOUNT STACKABLE PL-1 1 GA $ 5.25 PL-4 4 GA $ 5.25 PL-1/0 1/0 $ 5.25 PL-2/0 2/0 $ 5.3 PL-3/0 3/0 $.75 PL-4/0 4/0 $.98 TOP OR SIDE MOUNT DOUBLE STACKABLE MR-1/0 & 2/0 1/0 & 2/0 $.38 MR-3/0 3/0 $ 3.75 MR-4/0 4/0 $ PH. (800)
5 HEAT SHRINK TUBING Using heat shrink tubing will extend the life of your cables and give you more dependable service. FEATURES: PROTECTS AGAINST CORROSION Heat shrink tubing protects battery cables and terminals from corrosive acid fumes near batteries. It also protects against oil, fuel, water, salt, grease, animal acids and other chemicals. IDENTIFIES POSITIVE & NEGATIVE POLARITY Use red heat shrink tubing on positive cables, black on negative cables. Color coded battery cables are easier to route and to service. ACTS AS STRAIN RELIEF & PREVENTS ABRASION Heat shrink tubing acts as a strain relief between the cable and terminal. It can also be used where abrasion is a potential cause of failure. Long, heavy battery cables can fail because of fatigue caused by vibration. PART NO. SIZE PRICE/FT /8 $ /1 $ /4 $ /8 $ /2 $ /4 $ " $ 9.90 PH. (800)
6 TOOLS HEX CRIMP TOOL *Made in U.S.A. *Designed for heavy duty battery terminals *Crimps terminals 8 Ga - 250MCM (/0 Ga) *Adjustable crimp dies permanently attached *Die settings have letter, number, and color codes *Crimps all major brands of battery terminals, copper lugs, and splices *Insulated grips for comfort and safety #1090 Hex Crimp Tool $ BATTERY CABLE CUTTER *Cuts cable up to 2/0 *Only 9" long, fits any tool box *Insulated grips #1011 Battery Cable Cutter $ BRUTE TERMINAL CRIMPER *Inexpensive, simple crimping tool *Use with hammer or vise *Crimps 8 Ga - 4/0 Ga terminals *Spring loaded pin locks in 'up' position for loading terminal and cable. Pin is then released to hold terminal securely during crimping SKT-840 Brute Terminal Crimper $ COPPER POWER WELDING CABLE *Made with very fine copper wire and insulated with a synthetic rubber *More flexible than battery cables, especially in cold temperatures *Easier to route in tight places WC Ga Welding Cable 3.45 /ft WC /0 Welding Cable 4.5 /ft WC /0 Welding Cable 5.3 /ft PH. (800)
7 MASTER DISCONNECT SWITCH LEVER OPERATED - -3 VOLT 180 AMPS CONTINUOUS CAPACITY, 1000 AMPS IN RUSH S.P.S.T. (OFF-ON) TWO STUD TERMINALS for battery circuit only. Does not disconnect alternators, engine must be shut off to avoid potential damage to alternator diodes. *Incorporates heavy duty contacts *One piece die-cast housing sealed with O-rings at base and mounting stem to keep out dust and moisture *Large die-cast lever for ease of operation *Two 3/8" copper stud terminals with hex nuts and lockwashers *Overall length 4-3/8" - diameter 2-5/8" approx. *Conforms to requirements of U.L. #558 *Mounting stem 3/4" diameter, 1/2" long, with two hex nuts and lockwashers *Designed for protection against battery drain, electrical fires, tampering and theft *Fits panels up to 1/4" thick # Master Disconnect Switch Includes two 2/0 copper battery lugs w/ 3/8 hole and face plate $29.00 PH. (800)
8 $295 BAT ASSORTEMNT Serviced By: COPPER BATT TERMINAL ASSORTMENT /4 BLACK D/W HEAT SHRINK TUBING 1 FT BATTERY CLEANER & PROTECTOR HDBT-2/0P 2/0 POS STR CRIMP BATT TERMINAL HDBT-2/0N 2/0 NEG STR CRIMP BATT TERMINAL HDBT-1P 1 GA POS BATTERY TERMINAL HDBT-1N 1 GA NEG BATTERY TERMINAL ML-1-3/8 1739A 3/4 RED D/W HEAT SHRINK TUBING 1 FT 1 SKT-840 Battery Crimping Tool RA-2/0P 2/0 POS FLAG BATT TERMINAL 2 RA-2/0N 2/0 NEG CRIMP BATT TERMINAL 1 GA MAGNA LUG 3/8 STUD ML-200-3/8 2/0 MAGNA LUG 3/8 STUD ML-200-1/2 2/0 MAGNA LUG 1/2 STUD 1 2 PH. (800)
9 1090K HEX CRIMP TOOL KIT HDBT-1P 1 GA POS BATT TERM HDBT-1N ML-1-3/8 HDBT-2/0N HDBT-2/0P 1 GA NEG 1 GA MAGNA LUG 3/8 STUD 2/0 NEG STR 2/0 POS STR BATT TERM CRIMP BATT TERMINAL CRIMP BATT TERMINAL /4 D/W HEAT SHRINK BLK 2 ML-200-3/8 RA-2/0P 2/0 MAGNA LUG 2/0 POS FLAG BATT TERM 3/8 STUD HEX CRIMP TOOL RA-2/0N ML-200-1/2 2/0 NEG FLAG BATT TERM 2/0 MAGNA LUG 2 1/2 STUD 1739A 3/4 D/W HEAT SHRINK RED QTY PART # HDBT-2/0P HDBT-2/0N HDBT-1P HDBT-1N ML-200-1/2 ML-200-3/8 ML-1-3/8 1 GA MAGNA LUG - 3/8 STUD 1' /4 D/W HEAT SHRINK BLACK 1' 1739A 3/4 D/W HEAT SHRINK RED RA-2/0P 2 RA-2/0N 1 FC-4 Description POS 2/0 CRIMP BATT TERM NEG 2/0 CRIMP BATT TERM POS 1 GA CRIMP BATT TERM NEG 1 GA CRIMP BATT TERM 2/0 MAGNA LUG - 1/2 STUD 2/0 MAGNA LUG - 3/8 STUD CARRYING CASE HEX CRIMP TOOL BATTERY CLEANER & PROTECTOR 2/0 POS FLAG BATT TERM 2/0 NEG BATT TERM WHIP 2 OZ $475 PH. (800)
Heavy Duty Copper Battery Terminals
Heavy Duty Copper Battery Terminals Constructed of 131 contact copper to provide high conductivity. Raised characters to ensure legibility of important information regarding cable size, post type, and
More informationHeavy-Duty Top Post Terminals Fits 6 to 1 gauge cables. Heavy-Duty Top Post Epoxy Coated Terminals
1 6 7 5 4 3 2 1 Fits positive or negative posts 2 Bolt locks firmly from left to right side 3 Lead Alloy 4 Steel inserts avoid stripping 5 Universal Holds cable or strap 6 Removable plate for easy assembly
More informationBattery Products. Call or Fax:
Call 905.820.6150 or 1.800.363.1588 ax: 905.820.6142 Email: sales@techspan.ca Battery Products What s New? Epoxy Coated Battery Terminals 3-Way Top Post Battery Terminals Quick Disconnect Top Post Battery
More informationAUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS
AUXILIARY BATTERY BOX INSTALLATION INSTRUCTIONS The original TOMMY GATE hydraulic lift Assembling the Auxiliary Battery Box 1. Remove the cover from the auxiliary battery box by removing the two nuts and
More informationBATTERY CONNECTORS & CABLE
09 130 Battery Connectors 138 Conversion Connectors and Adapters 140 Booster Clamps and Cables 141 Charging Clips BATTERY CONNECTORS & CABLE CONNECTEURS ET CÂBLES DE BATTERIE TERMINALES Y CABLES PARA BATERIA
More informationBATTERY CONNECTORS, CABLE AND PROTECTIVE PRODUCTS
C O N N E C T A N D P R O T E C T BATTERY CONNECTORS, CABLE AND PROTECTIVE PRODUCTS CHARGING CLIPS BOOSTER CLAMPS AND CABLES BATTERY BOXES BATTERY HOLD-DOWNS AND TRAYS CRIMPERS AND CUTTERS PORTABLE POWER
More information650 Series Cargo Van Lift Mounting Instructions Fullsize Ford 1992-Present
TOMMY GATE OWNER'S / OPERATOR'S MANUAL 650 Series 650 LB Capacity 650 Series Cargo Van Lift Mounting Instructions Fullsize Ford 1992-Present Installing the Base Plate 1. Examine the interior and exterior
More information650 Series Cargo Van Lift Mounting Instructions Ford Transit (Standard Roof) 2015-Present
TOMMY GATE OWNER'S / OPERATOR'S MANUAL 650 Series 650 LB Capacity 650 Series Cargo Van Lift Mounting Instructions Ford Transit (Standard Roof) 2015-Present Installing the Base Plate 1. Examine the interior
More informationP Original Series Cargo Van Lift Mounting Instructions Fullsize Ford Van present. Preparing the Gate
Fullsize Ford Van- 1992-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting kit (Figure 1 and Table 1). S-400-40 STRAP VAN MOUNTING EAR BENT BRACKET
More informationBATTERY. Connectors. Quick Cable products Lift Truck Parts Professionals
Only battery connectors that are UL & CUL listed - proven in both Canada & the USA for conductivity & safety. (Listed by UL STD.486A & CUL, when applied with Cable HexCrimp tools 4255-001, 4255-001M, 4255-001$
More informationSwitches. Common Used Terminology:
Switches Product Description Page# Ball Switches 158 Breakaway Switch 158 Master Disconnect Switch Battery Master Disconnect Switch & Face Plate 159 Plunger Switch Sealed 158 Push/Pull Switches Medium-Duty,
More informationand Original Series Pickup Lift Mounting Instructions Fleetside Chevy & GMC Trucks Fleetside 4-door Chevy & GMC Trucks T-100
r ve and Original Series Pickup Lift Mounting Instructions Fleetside Chevy & GMC Trucks - 1960-1987 Fleetside 4-door Chevy & GMC Trucks - 1988-1991 Preparing the Gate 1. Remove the mounting hardware which
More informationSmart Switch Basic Kit - 24 volt ( ) Wiring Instructions
Smart Switch Basic Kit - 4 volt (54-08) Wiring Instructions NB 8/0/ 6 ga. wire 6 ga. wire 6 ga. wire OUT IN 6 ga. wire Yellow Black Blue 50 AMP BREAKER MOTOR 6 ga. wire 6 ga. wire 6 ga. wire ROCKER SWITCH
More informationand Original Series Pickup Lift Mounting Instructions Fullsize Nissan Titan Trucks present T-420 BOLT-ON GUSSET PART#5257
and Original Series Pickup Lift Mounting Instructions Fullsize Nissan Titan Trucks- 2004-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting bracket
More informationFax: PO Box 100, 2222 Moore Rd. Jonesville, MI
1-800-447-3150 Fax: 1-517-849-9516 PO Box 100, 2222 Moore Rd. Jonesville, MI 49250 www.hillsdaleterminal.com INDEX Adapters...12 Battery & Welding Cable...17 Battery Terminals...16 Bullet Connectors...10
More informationGood for ABS applications. Temperature rating -87ºF to 150ºF (-66ºC to 66ºC) Temperature rating -87ºF to 150ºF (-66ºC to 66ºC)
ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details 16-125 Replacement 30-9620 15, with PERMAPLUGS 30-9621 15, with zinc die-cast plugs 30-9624 15, with (Quick-Connect Plugs) 30-9920 15,
More informationCTN U-TYPE DIE COLOR INDEX QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473 CTN U-TYPE DIE COLOR INDEX QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 32000 GL 80 32002 GL 84 3999 GL 0 32004 GL 4 3200 GL 5 32003 GL 38
More informationWE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
More informationand Original Series Pickup Lift Mounting Instructions Fullsize Chevy & GMC Trucks: 1500 & 2500 LD HD & 3500HD BOLT-ON GUSSET
r ve and Original Series Pickup Lift Mounting Instructions Fullsize Chevy & GMC Trucks: 1500 & 2500 LD 1999-2007 2500HD & 3500HD 2000-2007 Preparing the Gate 1. Remove the mounting hardware which is banded
More informationand Original Series Pickup Lift Mounting Instructions T-150-T T-150 PART#5177 T-150-T
Fullsize Chevy & GMC Trucks- 988-999 Toyota Tundra- 2000-2006 Toyota T-00-993-999 Preparing the Gate r ve and Original Series Pickup Lift Mounting Instructions. Remove the mounting hardware which is banded
More informationSELF DRILL SCREWS FILLER STRIP
r ve Pickup Lift Mounting Instructions Fullsize Ford Trucks- F-150 2015-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting bracket kit (Figure
More informationP-350. Part# "
Original Series Cargo Van Lift Mounting Instructions Full Size Sprinter Vans(US)- 2002-2006 Step 1. Step 2. Step 3. Remove the reflectors that are located in the rear bumper. This will provide access to
More informationDeluxe High Amp Switch Kit - 12 Volt Wiring Instructions
1404 N. Marshall Ave. El Cajon C 92020 WLH 09/01/16 514-0139 OUT IN 16 ga. Black wire 16 ga. Green wire Yellow Black Blue 50 AMP BREAKER MOTOR 16 ga. White wire ROCKER SWITCH (IN CAB) BATTERY 607-0139
More informationSmart Switch with External Switch - 12 volt - ( )
Smart Switch with External Switch - 12 volt - (501-9953) Wiring Instructions MOTOR (-) / 6 ga. wire MOTOR (+) / 6 ga. wire CONTROL BOX BAT (-) / 6 ga. wire BAT (+) / 6 ga. wire MOTOR BAB 1/23/09 KJH 04/23/08
More informationParts Manual Rev. A RZT48 /
115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationG-170. r ve Pickup Lift Mounting Instructions Fullsize Chevy & GMC Trucks- 1500, 2500 & 3500: 2007-present
Fullsize Chevy & GMC Trucks- 1500, 2500 & 3500: 2007-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting bracket kit (Figure 1 and Table 1). 18-5/8"
More informationSWITCHES SECTION. Fuse Holders. Toggle Switches - Screw Terminals. Fuses. Toggle Switches - Blade Terminals. Terminal Block - Junction Box
SWITCHES Toggle - Screw s Toggle - Blade s Toggle (arine) - Blade s Lighted Toggle (arine) Contura III Rocker (arine) Toggle - icro Switch Key Switch Push-Pull Switch Push Button Switch Weatherproof Boots
More informationParts Manual Rev. B RZT48 /
115 91 36-2 Rev. B Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationParts Manual Rev. A RZT54 /
115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationT-52. r ve Pickup Lift Mounting Instructions Chevy / GMC- Colorado/ Canyon: 2015-present. Preparing the Gate. Installing the Bolt-on Gussets
Chevy / GMC- Colorado/ Canyon: 2015-present Preparing the Gate 1. Remove the mounting hardware which is banded to the liftgate. 2. Verify mounting bracket kit (Figure 1 and Table 1). LEFT BRACKET (RIGHT
More informationMICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Our sales, repair, and customer service teams received extensive training from Greenlee for the full line of products
More informationParts Manual P-ZT54 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual P-ZT54 / 9913402 Please
More informationTRADING CO., INC. AUTOMOTIVE ELECTRICAL SUPPLIES. We carry a full line of electrical supplies and primary wire! Call today!!
& TRADING CO., INC. WWW.DYNATRONINDUSTRIES.COM AUTOMOTIVE ELECTRICAL SUPPLIES & TRADING CO., INC. 63 AUSTIN BLVD COMMACK NY 11725 TEL: (631)543-4490 FAX (631)543-4496 TOLL FREE: 1-800-669-3962 We carry
More informationOVER 250 NEW PRODUCTS
FULL LINE CATALOG 68 Leadership in the Energy Storage Industry Key Components for Battery and DC Power OVER 250 NEW PRODUCTS Truck & Bus Back Up Power Material Handling Agricultural Construction Automotive
More informationBusBars, Connectors, and Insulators
BusBars,, and Insulators BusBars and PowerPosts provide a safe and convenient way to insulate circuit wires and connect them together. Feed Through and CableClams enable the boater to safely pass wires
More informationCommercial Automatic Washers
Commercial Automatic Washers Parts Refer to Page 3 for Model Numbers www.comlaundry.com Part No. 201751R1 June 2011 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location... 2
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HL400 LEGACY MIXER HL400 HL400C ML-134348 ML-134359 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43137 (June 2007) - 2 - HOBART Table Of Contents 5 CONTROL
More informationParts and Instruction Manual Frontrunner Series Floor Machines Low Speed & Dual Speed
Parts and Instruction Manual Frontrunner Series Floor Machines Low Speed & Dual Speed Technical Specifications Model Nos. FM17-115 / FM20-115 / FM17-220 / FM20-220 / FM17-220-60 / FM20-220-60, FM202S-115
More informationInstallationn Instruction Manual
Table of Contents Supplied Kit Parts.Page 2 Required Tool List Page 2 Step by Step Installation Instructions Pages 3-6 Battery Requirements.Page 6 Operation Page 7 Maintenance Page 7 Wiring Diagrams..Page
More informationPRODUCT CATALOG
www.hillsdaleterminal.com 2017 PRODUCT CATALOG Fuse Pullers 34 Heat Shrink Terminals 24 your needs or for additional information about our Heat Shrink Tubing 25 products and services. Heavy Duty Electrical
More informationDual Remote Filtration System Installation and Servicing Instructions
IMPORTANT NOTICE Read all instructions completely before attempting to install this unit. Improper installation could result in serious system and/or equipment damage. The installation of this system is
More informationA-M COPPER TUBE CRIMPING LUGS. for copper conductors. A-M series lugs are manufactured
A-M COPPER TUBE CRIMPING LUGS for copper conductors A-M series lugs are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the most efficient electrical conductivity
More informationAIR / ELECTRICAL COILS & ACCESSORIES CATALOG
RoadChoice.com AIR / ELECTRICAL COILS & ACCESSORIES CATALOG Table of Contents AIR COILS Air Brake Coils...................... 3 Air Brake Coils Brass Handles......... 3 Cab Blower Kit......................
More informationInstallation and Operation Guide. Tundra HD 2500 Power Inverter. for the. Webasto BlueCool Truck System
Installation and Operation Guide Tundra HD 2500 Power Inverter for the Webasto BlueCool Truck System www.tundrainternational.com www.techwebasto.com BCTSP0063A Table of Contents 1. Introduction 4 1.1 Disclaimer.................................................................................
More informationBackwater Performance Systems Large Vanguard Mikuni Twin Carburetor Kit
Backwater Performance Systems Large Vanguard Mikuni Twin Carburetor Kit 1. Throttle Cable Twin (CKC-41) 2. Carburetor VM30mm (CKC-40) 3. Loctite 242.5mL (A-210) 4. Air Cleaner Filter 6000 (EC-86) 5. Rev
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS OV300E MINI RACK OVEN ML-132155 OV300E A product of BAXTER MFG. CO., INC. 19220 STATE ROUTE 162 EAST, ORTING, WA 98360 FORM 43051 Rev. C (July 2017) F-43051 Rev. C (July 2017)
More informationConnectors and Insulators
52 Connectors and Insulators Terminal Blocks Connectors and Insulators As the nuts and bolts of a marine electrical system, connectors perform important functions on board. By keeping current flowing efficiently,
More informationFLEET ESSENTIALS QUICK REFERENCE GUIDE Fax Burke Street, Santa Fe Springs, CA 90670
WE MAKE PRODUCTS THAT MAKE A DIFFERENCE FLEET ESSENTIALS QUICK REFERENCE GUIDE For new and innovative products, visit www.phillipsind.com (B-FE-ENG) 9-26-16 12070 Burke Street, Santa Fe Springs, CA 90670
More informationParts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
More informationParts Manual Rev. A
115 97 79-27 Rev. A Parts Manual Z 248F / 967 844801-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More information2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space
STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2
More informationCTN QTY 7/374 8/346 11/375 12/ /298 18/324 19/470 20/299 22/472 24/473. Two-Hole NEMA CTN QTY
PAGE 2 PEEP HOLE STANDARD BARREL COPPER LUGS Allows inspection of the termination to assure complete cable insertion GL SERIES One-Hole 2000 2002 998 999 2004 200 200 2005 200 2008 207 2007 2009 200 20
More informationBMK-18 U.S. Patent #5,298,158
BMK- U.S. Patent #5,29,5 Marine Dual Remote Filtration System Mounting Kit Installation and Servicing Instructions IMPORTANT NOTICE Read all instructions completely before attempting to install this unit.
More informationVALVE AND PLUMBING KIT NEW HOLLAND 7310 LOADER NEW HOLLAND TRACTORS
ASSEMBLY MANUAL Keep With Operator s Manual VALVE AND PLUMBING KIT NEW HOLLAND 73 LOADER NEW HOLLAND TRACTORS MODEL 2WD FWA LESS CAB WITH CAB TT55 X X X TT75 X X X Valve and plumbing kit can be installed
More informationParts Manual Rev. A
115 97 25-27 Rev. A Parts Manual Z 242F / 967 844702-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationELECTRIC START KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6. All Polaris Pro-Ride Snowmobiles
ELECTRIC START KIT P/N 2879330 APPLICATION All Polaris Pro-Ride Snowmobiles BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
More informationParts Manual Rev. 5
0-0- CL 0 - Rev. Parts Manual MZ / 0-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of % ethanol (E)
More informationHP20 Series. Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending
HP20 Series Utilizes a Small #20 Size Shell Accommodates Up to 646 MCM Cable Patents Pending RigPower s mission is to create new industry standards in industrial electrical connectors by combining appropriate
More informationand Original Series Pickup Lift Mounting Instructions FILLER STRIP T-330 PART#13203 BOLT-ON GUSSET
Fullsize Dodge Trucks- 1500 2002-present 2500 & 3500 2003-present Preparing the Gate 1. Remo the mounting hardware which is banded to the liftgate. 2. Verify mounting bracket kit (Figure 1 and Table 1).
More information61 MID-CUT DECK ASSEMBLY
6 1 K 2 8 A PARTS MANUAL A A 102 101 100 103 99 83 97 61 34 93 12 86 123 2 74 124 55 56 92 48 5 7 8 10 84 9 36 73 95 3 31 58 76 62 59 22 27 64 44 43 87 17 1 13 35 31 41 40 26 24 91 55 48 23 22 59 21 31
More informationPlease read the operator manual carefully and make sure you understand the instructions before using the machine.
967327801-00 Parts Zero Manual Turn Mower Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service
More informationCHASSIS / FRAME REF. BAT- TERY
CHASSIS / FRAME REF. BAT- TERY 2 3 0 2 3 2 22 23 2 2 2 2 2 2 30 2 2 2 23 2 2 2 2 2 2 2 2 2 CHASSIS / FRAME... 3... 3... PAD-ABRASIVE 2... 3 0...... FRAME W/DECALS 3... 3 3...... FOOT PLATE W/DECALS...3
More informationWirelessAIR Advanced Integrated Remote
Advanced Integrated Remote Gen 3 Kit 72000 Automatic Leveling Digital On-Board Compressor System MN-772 (021112) ECR 7233 INSTALLATION GUIDE For maximum effectiveness and safety, please read these instructions
More informationCantilever Series Mounting Instructions Chevy Express (AD) present
Chevy Express (AD)- 2003-present Preparing the Gate 1. Remove the platform, mounting kit, and bridge assemblies, which are banded to the main assembly. Leave the banding that holds the folding cylinder
More informationParts Manual Rev. A
115 96 28-27 Rev. A Parts Manual Z 242F / 967 271802-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More information2100 SIGNATURE SERIES
100 SIGNATURE SERIES MACHINE: 30011 PAGE 1 100 SIGNATURE SERIES MACHINE: 30011 9 6 1 1 10 11 1 7 0 13 8 1 19 OLD STYLE BATTERY BOX 15 3 18 17 16 6 3 5 5 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC CLUTCH
More information52 MID-CUT DECK ASSEMBLY
5 2 K 2 5 A PARTS MANUAL 52 MID-CUT SECTION 52 MID-CUT DECK ASSEMBLY 19 79 36 30 18 82 107 104 7 27 40 85 35 41 28 43 39 111 30 114 99 42 95 80 88 39 6 31 68 84 83 110 34 15 6 14 11 109 30 18 96 31 51
More information8/6/ SERIES. By Stonekor LLC COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
100 SERIES By Stonekor LLC PAGE 1 100 SERIES BUFFER DECK SUB ASSEMBLY 1 1 33 9 By Stonekor LLC 35 3 35 6 1 1 10 11 1 0 7 13 8 9 31 36 38 19 8 1 3 15 3 35 OLD STYLE BATTERY BOX 18 17 16 6 3 5 5 FACTORY
More informationGrounding equipment COOPER POWER SERIES. Temporary Connections CA325004EN. Contents
Temporary Connections CA325004EN Supersedes November 2016 Grounding equipment COOPER POWER SERIES Contents Description Page Grounding elbow products... 2 Grounding elbow and kit product ratings... 5 200
More information2400 SERIES 8/6/2013 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
00 SERIES PAGE 1 00 SERIES BUFFER DECK SUB ASSEMBLY 1 1 37 3 3 15 5 31 6 8 1 30 33 17 7 19 1 11 13 7 3 36 35 9 10 0 31 18 16 33 3 39 33 3 8 1 9 33 3 1 3 38 3 FACTORY INSTALLED OPTIONS 30011 ELECTRIC CLUTCH
More informationCHASSIS / FRAME REAR OF MOWER
CHASSIS / FRAME 23 23 3 2 2 22 2 2 2 2 REAR OF MOWER 20 2 2 2 2 3 CHASSIS / FRAME... 3... 3... PAD-ABRASIVE 2... 3...... FRAME W/DECALS 3... 3 3...... FOOT PLATE W/DECALS...3... 2... KNOB W/STUD... 3 202......
More information2400 SIGNATURE SERIES MACHINE:
00 SIGNATURE SERIES MACHINE: 3001 PAGE 1 00 SIGNATURE SERIES MACHINE: 3001 15 5 6 8 1 17 7 19 1 13 9 11 18 10 16 1 1 3 3 FACTORY INSTALLED OPTIONS 30011 ELECTRIC CLUTCH NOTE: USE PULLEY 68010 WITH ELECTRIC
More informationLoadbreak Elbows. 3 Loadbreak Elbows. 200 Amp 5-15 kv Industrial pg Loadbreak Elbows. 200 Amp 25 kv Industrial pg. 254.
3 Loadbreak Elbows 200 Amp 5-15 kv Industrial pg. 252 Loadbreak Elbows 200 Amp 25 kv Industrial pg. 254 Loadbreak Elbows 200 Amp Industrial pg. 255 Loadbreak Elbows Accessories 3 Loadbreak Elbows 3M 200
More informationParts Manual RAM 44 / RAM 50 / RAM MAG 44 / RAM MAG 50 / RAM MAG 50 / RAM MAG 44 / RAM
Parts Manual RAM 44 / 968999551 RAM 50 / 96899955 RAM MAG 44 / 968999559 RAM MAG 50 / 968999561 RAM MAG 50 / 96899956 RAM MAG 44 / 968999650 RAM MAG 50 / 968999651 Please read the operator s manual carefully
More informationParts Manual Zero Turn Mower / Z 248F
Parts Manual Zero Turn Mower / Z 248F 967262501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More information2700 SERIES 8/6/2013 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
700 SERIES PAGE 1 700 SERIES BUFFER DECK SUB ASSEMBLY 39 39 8 18 16 0 17 35 19 1 30 7 9 30 15 0 1 1 5 1 8 13 31 3 9 3 33 38 31 30 6 7 37 5 31 30 6 7 6 11 10 36 9 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC
More information8/6/2013 LX-30 MACHINES: COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
LX-0 MACHINES: 00 000 STONEKOR LLC -800-6-09 customerservice@stonekor.com www.stonekor.com PAGE LX-0 GRINDER DECK SUB ASSEMBLY 0 6 7 7 9 8 8 9 8 7 6 0 9 7 8 6 7 6 8 0 6 0 PAGE LX-0 GRINDER DECK SUB ASSEMBLY
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationDESCRIPTION AND DESIGN FEATURES
RMP II Series DESCRIPTION AND DESIGN FEATURES RMP II Series Female Panel Mounted Receptacle RMP II Series Male Panel Mounted Receptacle RigPower s mission is to create new industry standards in industrial
More informationmh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY
mh-valve.com 129 HYDRANT AWWA C502 NSF 61/372 CERTIFIED UL LISTED FM APPROVED 250 PSI WORKING PRESSURE 10-YEAR LIMITED WARRANTY 129 HYDRANT YESTERDAY, TODAY, & TOMORROW For more than 85 years, the M&H
More informationMGB Alternator Conversion Installation Instructions For MGA & 1962 to 1967 MGB
MGB Alternator Conversion Installation Instructions For MGA & 1962 to 1967 MGB PART# 130-078, 130-088, 130-098 440 Rutherford St. Goleta, CA 93117 1-800-642-8295 FAX 805-692-2525 www.mossmotors.com Scan
More informationK81-D FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-D FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J L M K N P Q S R
More informationEFFICIENCY: In order to maximize power, prolong battery life and minimize power requirements, low loss connections assists in managing these.
1 2 POWER: Consumers do not like to give up anything. They prefer more for less. In addition, they have grown accustom to the convenience of a gas powered vehicle. EFFICIENCY: In order to maximize power,
More informationMODEL B ELECTRIC HYDRAULIC PUMP
Parts List for: Form No. 05 STATE RTE. 7 NORTH MAHWAH, NJ 070-995 Tel: (0) 5-9500 Fax: (0) 5-95 HYTORCQAS-C5 HYTORCQAS-C0 MODEL B ELECTRIC HYDRAULIC PUMP, 5 9 7 5, Motor Control Assemblies See sheets 5
More informationParts Manual Rev. A Z 246 /
115 97 16-27 Rev. A Parts Manual Z 246 / 967 844501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationREJUVENATOR /6/13
REJUVENATOR 3000 3009 STONEKOR LLC -800-33-059 customerservice@stonekor.com www.stonekor.com REJUVENATOR ENGINE DECK SUB ASSEMBLY 8 3 9 7 3 3 8 9 0 0 3 5 3 30 3 5 7 30 35 33 3 37 38 39 0 8 9 5 3 7 3 REJUVENATOR
More informationModel C4 - Diagram #1
C-4 Model C4 - Diagram # 29 2 40 ASSEMBLY 43 38 2 4 52 4 44 4 28 3 ASSEMBLY 32 34 ASSEMBLY 42 7 7 5 50 49 33 57 29 37 3 20 2 2 48 ASSEMBLY 5 3 9 2 3 0 4 3 2 58 22 23 ASSEMBLY ASSEMBLY 54 53 ASSEMBLY 5
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationParts Manual RZ4219 / RZ4219 BF /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4219 / 966809001 RZ4219
More informationParts manual. Models: /ZEKW /ZEKW /ZEKW48190 MANUAL NO REV. IR (06/26/06)
Parts manual Models: 989999/ZEKW10 989999/ZEKW10 989990/ZEKW8190 MANUAL NO. 9 11 REV. IR (0//0) MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER ADDRESS NOTES: 00 Yazoo/Kees Power Equipment. All rights
More informationAUTOMATIC BEST BATTERY SELECTOR INSTALLATION & OPERATION BBS-1600 BBS-1600E
AUTOMATIC BEST BATTERY SELECTOR INSTALLATION & OPERATION BBS-1600 BBS-1600E SENS part no: 101314 Document revision: H DCN No. 107395 Date 11/22/17 1840 Industrial Circle Longmont, CO 80501 Fax: (303) 678-7504
More informationWire and Cable Division
Wire, Cable, and Battery Accessories PRODUCT CATALOG 2012 Wire and Cable Division A division of the world's Largest and Most Modern Single-Site Battery Manufacturing Facility East Penn s Wire and Cable
More informationAUTOMATIC BEST BATTERY SELECTOR INSTALLATION & OPERATION BBS-4800 BBS-4800E
AUTOMATIC BEST BATTERY SELECTOR INSTALLATION & OPERATION BBS-4800 BBS-4800E SENS part no: 101312 Document revision: K DCN No. 107455 Date 4/2/18 1840 Industrial Circle Longmont, CO 80501 Fax: (303) 678-7504
More informationParts Manual Zero Turn Mower / Z
Parts Manual Zero Turn Mower / Z 246 967271501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationK81-DD FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-DD FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J K M L N P Q S R
More informationZVKH61272 ZVKH72272 ZVKW52252 ZVKW61252 ZVHO61242 MANUAL REV. 02 (03/17/05)
Parts Manual Models: ZVKH6 ZVKH ZVKW ZVKW6 ZVHO6 MANUAL 06 REV. 0 (0//0) Model Number: Serial Number: Date of Purchase: Dealer Information: Notes: 00 Yazoo/Kees Power Equipment. All Rights Reserved. Beatrice,
More informationParts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationChoose molded-to-cable or fi eld-attachable styles. J-Series are available in red and black synthetic rubber for easy phase identification.
Plug and Receptacles Cam-Lok has been supplying high quality electrical connectors to the welding industry for more than 40 years. No other manufacturer offers a broader line of connectors for both general
More informationParts Manual M-ZT52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual M-ZT52 / 961001 Please
More informationAerial Maintenance. Drip less oil or light machine oil is used on control cables, door latches, and hinges.
Oils, greases, and other lubricants used by this Department. Engine oil SAE 15W40 is used in the crankcase of our apparatus, high-fog pump, 1981 American La France road pump transmission and also as a
More information