Toggle Switches. Eaton. The Power of Reliability

Transcription

1 Eaton Commercial Controls Division General Purpose C Rated General Purpose C/DC Rated Industrial Purpose C/DC Rated Special Purpose Illuminated C Rated Double Insulated Industrial and VDE Panelboard Switches Outlet ox Mounting High Capacity Heavy Duty and Heavy Duty Hesitation Military Purpose Toggle Switches The Power of Reliability 2.1

2 TOGGLE SITCHES General Purpose Toggle Switches C Rated DESCRIPTION These ac rated toggle switches offer the widest selection of features and the design flexibility to meet a variety of applications. Combi-Term Option This is an extension of our ac rated General Purpose Toggle Switch. The Combi-Term design allows the user the option of Screw Terminals,.250 uick Connects or Solder Termination all on the same switch. The special clips and screws are provided in apoly bag with the switch. SPECIFICTIONS Rating: See selection table. Circuits: 1PST, 1PDT, 2PST, 2PDT, 3PST, 3PDT, 4PST & 4PDT. Maintained and momentary. Contact Mechanism: Slow-make/Slow-brake butt contact. Terminal Types: Screw Terminals rass designed to accept #6-32 x3/16 binding head (Cat.No.811-2)screws. Furnished unassembled. Solder Lug Terminals Tintillate plated brass. Spade Terminals rass. Combi-Term rass. STNDRD C RTED TOGGLES SELECTION TLE Rating 6, 125V ac 3, 250V ac 10, 250V ac 1/2 Hp, 250V ac 15, 125V ac 10, 250V ac 1/2 Hp, 125V-250V ac Poles and Circuit with Toggle in UP CENTER DON Position Position Position ONE POLE () (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) SE CIRCUIT SEE PGE P.S.T. ON NONE OFF 1 P.D.T. ON OFF ON 1 P.D.T. ON NONE ON 1 P.D.T. ON ON* NONE OFF ON* ON* 1 P.S.T. OFF NONE ON* 1 P.S.T. OFF NONE ON* 1 P.D.T. ON* ON OFF NONE ON* ON* 1 P.D.T. ON ON* OFF OFF ON* ON* 1 P.S.T. ON NONE OFF ushing Length mm (inches) Lever Length mm (inches) CTLOG NUMERS Solder Screw.250 Spade Lugs Terminals Terminals ONE POLE 8.74 (.344) (.563) 7580K7 7580K5 7580K (.469) (.563) 7580K6 7580K4 7580K (.469) (.563) 7581K6 7581K4 7581K (.469) (.563) 7582K6 7582K4 7582K (.469) (.563) 7585K6 7587K6 7585K4 7587K4 7585K8 7587K (.469) (.563) 7506K3 7506K4 7506K (.469) (.688) 7506K K K (.469) (.563) 7509K4 7510K6 7509K5 7510K7 7509K7 7510K (.469) (.688) 7508K K K K K K (.344) (.563) 7501K K K (.469) (.563) 7501K K K15 Combi-Term N/ 15, 125V ac 10, 250V ac 1/2 Hp, 125V ac 20, 125V ac 10, 250V ac 1/2 Hp, 125V ac 20, 125V C 10, 250V C 1 Hp, V ac 30, 125V ac 25, 250V ac 1 P.D.T. ON OFF ON 1 P.D.T. ON NONE ON 1 P.S.T. ON NONE OFF 1 P.S.T. ON NONE OFF ON OFF ON 1 P.D.T. ON NONE ON ON* OFF ON* 1 P.S.T. ON NONE OFF (.469) (.563) 7503K K K (.469) (.563) 7505K4 7504K4 7505K (.469) (.688) 7546K K K (.687) 7802K K K21 E 7802K K K K K (.671) 7802K K K23 E 7802K K17 R 7802K37 R 7802K27 R 7802K47 R 8.74 (.344) (.563) 7576K2 N/ Selection Table continues on page 2.4. * Momentary Contact. Single pole switch in 2-pole base. lso V ac Rating. Elso 277V ac, 3/4 120, 240 and 277V ac. RNot CS Certified. 2.2

3 ase Material: Thermoset molding material. Mounting Means: Threaded ushing mm (.468 ) dia., 32threads/inch. 1.73x.89mmdeep (.068x.035 deep), provides antirotation feature. Hardware Supplied 1 hexagon locknut (Cat.No )and 1 bright nickel plated knurled facenut (Cat. No F1), except which have bright nickel hexagon facenut (Cat. No ). Furnished unassembled. Finish: right nickel plated toggle lever and bushing. Dielectric ithstand: 1,000V RMS minimum. Operating TemperatureRange: C to C (0 Fto+150 F). pprovals: UL Recognized. CS Certified (except as noted). 2 Contact Material: 7500, 7600, 7700 and 7900 Series Switches mperage Movable Stationary 3 to 6 Silver Plated Copper Silver Plated Copper 10 to 20 Silver Plated Copper with Silver uttons Silver Plated Copper with Silver uttons 20 to 30 Silver Plated Copper with Cad Oxide uttons Copper with Cad Oxide uttons 7800 Series Switches 3 to 6 Silver Plated Copper Silver Plated Copper 10 to 20 Copper with Silver uttons Copper with Silver uttons DIMENSIONS PPROXIMTE IN MM (INCHES) DESIGNER LEVER 1-2 Pole ±.64 (16.26) 3-4 Pole ±.76 (19.30) ±.37 (9.40) Single Pole ±.06 (1.52) 7500, 7600, 7700, 7900 Series Double Pole OPTIONL FETURES General Purpose C Rated Toggles, pages Features shown below may not be available on all toggle models. Contact your local Eaton Sales Representative. FETURES FOR 7500, 7600, 7700, 7900 SERIES 3-Independent ON Circuit (2PDT or 4PDT only, refer to page 4.28) Short (11/32 ) ushing Tall (15/32 ) ushing hite Nylon Designer Lever (See above dimensions) lack Nylon Designer Lever (See above dimensions) Hardware Furnished ssembled Reversing Jumpers (Not for use with 3-Independent ON Circuit) Short (15/32 ) at Lever Tall (11/16 ) at Lever (Not available with Short ushing) Rotate 180 Lever Seal Omit One Pole (2P, 3P, 4P only. Not for use with 3-Independent ON Circuit) FETURES FOR 7800 SERIES ONLY 3-Independent ON Circuit (2PDT or 4PDT only, refer to page 4.28) Hardware Furnished ssembled Reversing Jumpers (Not for use with 3-Independent ON Circuit) Rotate 180 Silicone Lever Seal (1P and 2P only) Omit One Pole (2P, 3P, 4P only. Not for use with 3-Independent ON Circuit) ±.20 (5.08) 7800 Series Double Pole Four Pole 2.3

4 TOGGLE SITCHES General Purpose Toggle Switches C Rated (continued) STNDRD C RTED TOGGLES SELECTION TLE Rating 6, 125V ac 3, 250V ac 2, 277V ac 2.5, 125V ac Poles and Circuit with Toggle in UP CENTER DON Position Position Position TO POLE () (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) SE CIRCUIT SEE PGE P.S.T. ON NONE OFF C ushing Length mm (inches) Lever Length mm (inches) CTLOG NUMERS Solder Screw.250 Spade Lugs Terminals Terminals TO POLE 11.91(.469) (.563) 7590K6 7590K4 7590K8 Combi-Term 6, 125V ac 3, 250V ac 2.5, 125V ac 6, 125V ac 3, 250V ac 2 P.D.T. ON OFF ON D 2 P.D.T. ON NONE ON D 2 P.D.T. ON* OFF ON* D (.469) (.563) 7591K6 7591K4 7591K (.469) (.563) 7592K6 7592K4 7592K (.469) (.563) 7597K6 7597K4 7597K8 15, 125V ac 10, 250V ac 1/2 Hp, 125V ac 15, 125V ac 10, 250V ac 3/4 Hp, V ac 15, 125V ac 10, 250V ac 15, 125V ac 10, 250V ac 1/2 Hp, 250V ac 20, 125V ac 10, 250V ac 1/2 Hp, 125V ac 20, 125V ac 10, 250V ac 1 Hp, V ac 15, 125V ac 10, 250V ac 1 Hp, 3 Ph V ac 1 Hp 1 & 2 Ph V ac 15, 125V ac 10, 250V ac 20, 125V ac 10, 250V ac 1 Hp, 120V ac 1, 2, & 3 phase 15, 125V ac 10, 250V ac 20, 125V ac 10, 250V ac 1/2 Hp, 125V ac 20, 125V ac 10, 250V ac 1 Hp, V ac 2 & 3 phase 2 P.S.T. ON NONE OFF C 2 P.D.T. ON OFF ON D 2 P.D.T. ON NONE ON D 2 P.S.T. OFF NONE ON* C ON OFF ON* 2 P.D.T. ON* OFF ON* D ON NONE ON* 2 P.D.T. ON* OFF ON* D 2 P.S.T. ON NONE OFF C 2 P.D.T. ON NONE ON D 2 P.S.T. ON NONE OFF C ON OFF ON 2 P.D.T. ON NONE ON D ON* OFF ON* THREE POLE 3 P.S.T. ON NONE OFF E 3 P.D.T. ON OFF ON F ON NONE ON 3 P.D.T. ON* OFF ON ON* NONE ON 3 P.D.T. ON OFF ON F 4 P.S.T. ON NONE OFF E 4 P.D.T. ON OFF ON ON NONE ON 4 P.S.T. ON NONE OFF E 4 P.D.T. FOUR POLE ON OFF ON ON NONE ON 4 P.D.T. ON OFF ON F F F F 8.74 (.344) (.563) 7561K5 7560K6 7561K (.469) (.563) 7561K4 7560K5 7561K (.344) (.563) 7563K5 7562K5 7563K (.469) (.563) 7563K4 7562K4 7563K (.469) (.563) 7565K5 7564K6 7565K (.469) (.563) 7566K4 7566K5 7566K7 7568K3 7568K2 7568K (.469) (.563) 7569K1 7569K2 7569K3 7570K4 7570K5 7570K (.469) (.688) 7569K K K (.469) (.688) 7630K K K (.469) (.688) 7632K K K K K K21 E 7803K K K K22 R 7803K K K K23 R 7803K43 T 7803K17 E 7803K37 E 7803K27 E 7803K47 E THREE POLE (.469) (.688) 7700K1 7700K2 7700K (.469) (.688) (.469) (.688) 7701K1 7701K2 7701K3 7702K1 7702K2 7702K3 7704K1 7704K2 7704K3 7705K1 7705K2 7705K3 7804K12 E 7804K32 E 7804K22 E 7804K42 E (.469) (.688) 7691K K (.469) (.688) 7693K2 7692K K5 7694K (.469) (.688) 7933K K K (.469) (.688) FOUR POLE 7934K K K K K K K12 E 7805K32 E 7805K22 E 7805K42 E N/ N/ N/ 2.4 * Momentary Contact. lso 1/2 Hp at V ac Rating V ac 1 or 2 phase and V ac, 3 phase. ENot CS Certified. Rlso 7.5, 277V ac, 3/4 Hp, V ac.

5 DIMENSIONS 7500, 7600, 7700, 7900 SERIES 1PST MINTINED & MOMENTRY (SCRE TERMINLS) PPROXIMTE IN MM (INCHES) 1PDT MINTINED & MOMENTRY (SOLDER LUGS) (.625) x D. ( ) ( ) (15/32-32 Thd.) 7.62 (.300) (1.218) (1.047) (.625) x D. ( ) ( ) (15/32-32 Thd.) 6.86 (.270) (1.125) (1.047) 2 1PDT MINTINED & MOMENTRY (SPDE TERMINLS) 2PDT MINTINED (SCRE TERMINLS) (1.125) (.625) x D. ( ) ( ) (15/32-32 Thd.) (.440) 0.78 Ref. (.031) (1.118) (.750) (.740) (.797) (15/32-32 Thd.) (1.312) x D. ( ) ( ) (.300) (1.062) 2PDT MINTINED (SOLDER LUGS) 2PDT MINTINED (SPDE TERMINLS) (.750) (.740) (15/32-32 Thd.) (1.312) (1.312) (15/32-32 Thd.) x D. ( ) ( ) 6.85 (.270) (1.031) (.750) x D. ( ) ( ) (1.200) (.440) 2PDT MOMENTRY (SCRE TERMINLS) 2PDT MOMENTRY (SOLDER LUGS) (1.312) x D. ( ) ( ) (15/32-32 Thd.) (.562) (.750) (.797) 0.78 Ref (.031) (.910) 7.62 (.300) (1.312) (15/32-32 Thd.) (.750) x D. ( ) ( ) 0.78 Ref. (.031) (.562) (.910) 6.85 (.270) 2.5

6 TOGGLE SITCHES General Purpose Toggle Switches C Rated (continued) DIMENSIONS 7500, 7600, 7700, 7900 SERIES PPROXIMTE IN MM (INCHES) 2PDT MOMENTRY (SPDE TERMINLS) 3PDT MINTINED & MOMENTRY (SCRE TERMINLS) (1.312) (15/32-32 Thd.) (.750) x D. ( ) ( ) 0.78 Ref. (.031) (.910) (.440) (.562) (15/32-32 Thd.) (.688) (.469) (.965) 7.62 (.300) Max. (1.333) 0.78 Ref. (.031) (1.437) x D. ( ) ( ) 3PDT MINTINED & MOMENTRY (SOLDER LUGS) 3PDT MINTINED & MOMENTRY (SPDE TERMINLS) Max. (1.333) Max. (1.333) (15/32-32 Thd.) (.688) (.469) (1.437) (15/32-32 Thd.) (.688) (.469) (1.437) (.965) 6.85 (.270) x D. ( ) ( ) 0.78 Ref. (.031) (.965) (.440) x D. ( ) ( ) 0.78 Ref. (.031) 4PDT MINTINED & MOMENTRY (SCRE TERMINLS) 4PDT MINTINED & MOMENTRY (SOLDER LUGS) x D. ( ) ( ) (.688) x D. ( ) ( ) (.688) (1.437) (1.546) (15/32-32 Thd.) (.469) (1.265) (1.437) (1.546) (15/32-32 Thd.) (.469) (1.225) Max. (1.333) 0.78 Ref. (.031) 7.62 (.300) Max. (33.85) 0.78 Ref.(.031) 6.85 (.270) 4PDT MINTINED & MOMENTRY (SPDE TERMINLS) x D. ( ) ( ) (.688) (15/32-32 Thd.) (.469) (1.437) (1.546) (1.405) (.440 ) Max. (1.333) 0.78 Ref. (.031) 2.6

7 DIMENSIONS 7800 SERIES x D. ( ) ( ) PPROXIMTE IN MM (INCHES) 1PST MINTINED (SCRE TERMINLS) 2PDT MINTINED (SCRE TERMINLS) x D. ( ) ( ) (.687) T.P.I. (15/32-32) (.671) T.P.I. (15/32-32) (.656) (.812) 7.14 (.281) (1.125) (.625) 5.94 (.234) (1.312) (.750) 2PDT MINTINED (COMI-TERMINLS) x D. ( ) ( ) 3PDT MINTINED (SCRE TERMINLS) x D. ( ) ( ) (.671) T.P.I. (15/32-32) (.687) T.P.I. (15/32-32) (.812) (.812) 9.53 (.375) (1.312) (.750) 5.54 (.218) (1.296) (1.437) 3PDT MINTINED (.250 SPDE TERMINLS) x D. ( ) ( ) 4PDT MINTINED (SCRE TERMINLS) x D. ( ) ( ) (.687) T.P.I. (15/32-32) (.687) T.P.I. (15/32-32) (.812) (.812) (1.296) (1.437) 5.94 (.234) (1.296) (1.437) COMI-TERM TERMINTION OPTIONS Solder uick Connect Screw 2.7

8 TOGGLE SITCHES General Purpose Toggle Switches C/DC Rated DESCRIPTION This line of switches employs a uick-make/uick-break contact mechanism. The resultant high speed movement eliminates the teasing of the switch and reduces the pitting of the contactsurfaces due to arcing. Self-cleaning and wiping contact action assures positive contact on switch operation. These switches are especially suited for use in small motor applications. SPECIFICTIONS Ratings: See selection table. Circuits: 1PST, 1PDT, 2PST, 2PDT. Maintained and momentary toggle action. Contact Mechanism: uick-make/uick-break wipingaction. Contact Material: ronze silver plated. Terminal Types: Screw Terminals rass designed to accept #5-40 x 5/32 (Cat. No )screws. Furnished unassembled. Solder Lug Terminals rass silver plated with mm ( )dia.hole. Integrated ire Leads 18gauge, 6 long and skinned 3/4. Special wire leads lengths beyond 6 are available at additional charge. ase Material: Thermoset molding material. Mounting Means: Threaded ushing mm (.468 ) dia., 32threads/inch x.89mm deep (.068x.035 deep), provides antirotationfeature. C/DC RTED TOGGLES SELECTION TLE Rating Poles and Circuit with Toggle in UP CENTER DON Position Position Position ONE POLE (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) () SE CIRCUIT SEE PGE4.28 ushing Length mm (inches) Lever Length mm (inches) CTLOG NUMERS Solder Screw ire Lugs Terminals Leads ONE POLE 3, 250V dc 6, 125V ac/dc 3, 250V dc 6, 125V ac/dc 3, 250V dc 1 P.S.T. ON NONE OFF ON NONE OFF 1 P.S.T. ON NONE OFF ON* NONE OFF 1 P.D.T. ON NONE ON 8.74 (.344) (.500) 8280K K K (.344) (.500) 8381K K K (.469) (.500) 8381K K K (.469) (.500) 8928K (.469) (.500) 8928K479 6, 125V ac/dc 3, 250V dc 2 P.S.T. 2 P.D.T. TO POLE ON NONE OFF ON* NONE OFF ON NONE ON ON NONE ON C D TO POLE (.469) (.500) 8370K K K (.469) (.500) 8928K K (.344) (.500) 8373K K K (.469) (.500) 8373K K K107 * Momentary Contact. 2.8

9 Hardware supplied 1hexagon locknut (Cat. No )and 1bright nickel platedknurled facenut (Cat. No F1). Furnished unassembled. Finish: right nickel plated toggle lever and bushing. Operating TemperatureRange: C to C (0 Fto+150 F). Options: Lever 11/16. Lever seal. Mounting hardware. Furnished assembled. Other lead lengths. pprovals: UL Recognized. CS Certified. 8280K115 2 DIMENSIONS PPROXIMTE IN MM (INCHES) 8280K115 1PST MINTINED (SOLDER LUG) 0.88 (.035) Deep 1.72 (.068) ide (.500) (.532) 6.22 (.245) 6.07 (.239) Dia (1.000) 8372K107 D 15/32 Dia.- 32 Thds. C (.562) (.968) 2.28 (.090) 2.15 (.085) Dia. Hole 5.08 (.200) C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.411) 29-1/2 8290K115 Dimensions continue on page K

10 TOGGLE SITCHES General Purpose Toggle Switches C/DC Rated (continued) DIMENSIONS PPROXIMTE IN MM (INCHES) 8290K K K107 & K108 1PST MINTINED (IRE LED) 1PST MINTINED (SCRE TERMINLS) 1PST MINTINED (SOLDER LUG) 0.88 (.035) Deep 1.72 (.068) ide 0.88 (.035) Deep 1.72 (.068) ide 0.88 (.035) Deep 1.72 (.068) ide (.500) (.500) (.671) 6.22 (.245) 6.07 (.239) Dia. 15/32 Dia.- 32 Thds. Standard (6.000") Long ire Leads (1.000) D (.968) (.562) C 1.19 (.046) C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.406) 29-1/ (.245) 6.07 (.239) Dia. 15/32 Dia.- 32 Thds (1.000) D (.968) (1.250) (.562) C 1.19 (.046) #5/40 x 5/32 Lg. inding Head Screw C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.406) 29-1/ (.245) 6.07 (.239) Dia. 15/32 Dia.- 32 Thds (1.093) D 2.28 (.090) 2.15 (.085) Dia. Hole (.687) C 5.15 (.203) C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.531) 29-1/ (.500) (.469) (1.656) 25-1/2 8391K107 & K K107 & K K478 1PST MINTINED (IRE LED) 1PST MINTINED (SCRE TERMINLS) 1PST MOMENTRY (SOLDER LUG) 0.88 (.035) Deep 1.72 (.068) ide 0.88 (.035) Deep 1.72 (.068) ide 0.88 (.035) Deep 1.72 (.068) ide (.664) (.671) (.690) (1.390) (1.156) 15/32 Dia.- 32 Thds. Standard (6.000") Long ire Leads 6.09 (.240) D (1.093) C (.685) 6.22 (.245) 6.07 (.239) Dia. 15/32 Dia.- 32 Thds. D (1.093) (.687) C #5/40 x 5/32 Lg. inding Head Screw 2.15 (.085) Dia. Hole 6.14 (.242) Dia. 15/32 Dia.- 32 Thds. D (.950) C C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.531) 29-1/ (.500) (.469) (1.656) 25-1/2 C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.531) 29-1/ (.500) (.469) (1.656) 25-1/2 C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.980) 29-1/ (.500) (.469) (1.656) 25-1/2 2.10

11 DIMENSIONS PPROXIMTE IN MM (INCHES) 8370 & 8373K107 & K & 8374K107 & K & & K108 2PST/2PDT MINTINED (SOLDER LUG) 1PST MINTINED (IRE LED) 2PST/2PDT MINTINED (SCRE TERMINLS) 2.28 (.090) 2.15 (.085) Dia. Hole 6.22 (.245) 6.07 (.239) Dia. 15/32 Dia.- 32 Thds. Two Solder Lugs Omitted For Single 0.88 (.035) Deep 1.72 (.068) ide (1.156) D (.687) (.873) (.830) C 0.88 (.035) Deep 1.72 (.068) ide 15/32 Dia.- 32 Thds. Double (1.080) (1.000) Single (1.156) D (.687) 6.22 (.245) 6.07 (.239) Dia (.640) C 7.14 (.281) These Terminals Omitted On Single Switches 15/32 Dia.- 32 Thds. #5/40 x 5/32 Lg. inding Head Screw 0.88 (.035) Deep 1.72 (.068) ide (1.563) (1.656) (.687) D 6.22 (.245) 6.07 (.239) Dia (1.093) (.640) C 8.73 (.343) 2 C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.694) 29-1/ (.500) (.469) (1.820) 25-1/2 C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.484) 29-1/ (.500) (.469) (1.515) 25-1/2 C D Lever ushing Overall Dimension Dimension Dimension Dimension (.500) 8.74 (.344) (1.484) 29-1/ (.500) (.469) (1.609) 25-1/2 2.11

12 TOGGLE SITCHES Industrial Purpose Toggle Switches C/DC Rated DESCRIPTION The Industrial Toggle Switch Line employs a uick-make/ uick-break wiping action contact mechanism. Large, well separated terminals reduce the possibility of electrical creepage and insure separation of loose wire strands from adjacent leads. These switches are designed for heavy duty applications, such as industrial power tools and floor cleaning/polishing equipment. SPECIFICTIONS Ratings: See selection table. Circuits: 1PST, 2PST, 2PDT. Maintained contact action. Contact Mechanism: uick-make/uick-break wipingaction. Contact Material: Movable Copper silver plated. Stationary ronze silver plated. Terminal Types: Screw Terminals 7320 & 7321 Series: rass designed to accept #5-40x1/4 (Cat. No ) bindingheadscrews. Furnishedunassembled & 7361 Series: rass designed to accept #6-32x1/4 (Cat. No ) bindingheadscrews. Furnishedunassembled Series: rass designed to accept #6-32x1/4 (CatNo ) binding head screws. Furnishedunassembled. INDUSTRIL PURPOSE SELECTION TLE Rating 16, 125V ac/dc 8, 250V ac/dc 1 Hp, 125V ac/dc 20, 125V ac/dc 10, 250V ac/dc 1 Hp, 250V ac 1 1/2 Hp, 250V dc 16, 125V ac/dc 8, 250V ac/dc 1 Hp, 125V ac/dc 20, 125V ac/dc 10, 250V ac/dc 1 1/2 Hp, 125V ac/dc 1 1/2 Hp, 250V ac/dc 20, 250V ac/dc 1 1/2 Hp, 125V ac/dc 2 Hp, 250V ac/dc 5, 125V ac/dc 10, 250V ac/dc Poles and Circuit with Toggle in UP CENTER DON Position Position Position ONE POLE STNDRD SE CIRCUIT SEE PGE P.S.T. ON NONE OFF 1 P.S.T. ON NONE OFF TO POLE STNDRD () 2 P.S.T. ON NONE OFF C 2 P.S.T. ON NONE OFF C 2 P.S.T. ON NONE OFF C 2 P.D.T. ON NONE ON D ushing Length mm (inches) Lever Length mm (inches) ONE POLE STNDRD CTLOG NUMERS Screw Terminals (.469) (.656) 7321K (.469) (.656) 7361K5 TO POLE STNDRD 8.74 (.344) (.656) 7320K (.469) (.656) 7320K (.344) (.656) 7360K (.469) (.656) 7360K (.344) (.813) 7402K (.469) (.813) 7402K (.469) (.813) 8690K2 2.12

13 7402 Series: rass designed to accept #8-32 x 3/8 binding (Cat No ) head screws. Furnished unassembled. ase Material: Thermoset molding material. Lever Material and Finish: right nickel plated brass. Hardware Supplied 1 hexagon locknut (Cat. No ) and 1 bright nickel plated hexnut (Cat. No ). Furnished unassembled. Operating Temperature Range: 0 C to +55 C (32 F to +131 F). Options: Spade terminals. Different bushing sizes. Special markings. Dust resistant lever seals. pprovals: UL Recognized. CS Certified. 2 Mounting Means: Threaded ushing dia., 32 threads/inch..068 x.035 deep, provides antirotation feature. 7321K3 DIMENSIONS PPROXIMTE IN MM (INCHES) 7320 & 7321 SERIES 7360 & 7361 SERIES 7360K (.78) (.89) (1.87) (.81) (2.25) (1.00) 7402 SERIES 8690 SERIES 7402K (1.26) (1.26) (2.64) (1.28) (2.50) (1.15) 8690K2 2.13

14 TOGGLE SITCHES Special Purpose Illuminated C Rated DESCRIPTION These illuminated switches are available only in single pole circuitry. two pole base is utilized with one pole housing the lamp. On single throw circuits, thelamp is wired to operate in conjunction with the switch. On double throw circuits, the lamp is independent of the switch. On the sealed versions, a silicone rubber seal is fitted to the paddle lever to provide a moisture and dust resistant seal between the lever and bushing. SPECIFICTIONS Circuits: 1PST and 1PDT. Maintained and momentary action. HO TO ORDER ILLUMINTED TOGGLES To determine your Complete Catalog Number you must start with the appropriate ase Circuit Number and add the appropriate Code Lettersand/orNumbers as in the example below: Start with this Contact Material: Movable Silver plated copper. Stationary Silver plated copper. Terminal Types: Spade Terminals rass. Lever Material: Colored thermoplastic paddlelever. Refer to pages for generalspecifications....to get to your ase Circuit Number...add each appropriate Code Number or Letter... Complete Catalog Number ase Circuit Lever ulb Termination Complete Catalog Number Color Voltage Type Catalog Number 7071K21 G K21G152 ILLUMINTED C RTED TOGGLE SELECTION TLE Rating 15, 125V ac 10, 250V ac 15, 125V ac 10, 250V ac Circuit with Toggle in Poles UP CENTER DON SE SE and Position Position Position CTLOG CIRCUIT NUMER SEE PGE4.28 Color Code () ILLUMINTED C TOGGLE SITCHES STNDRD 1 P.S.T. ON NONE OFF 7071K21 G Green Red mber G T 1 P.S.T. ON NONE OFF 7073K21 G 1 P.D.T. ON OFF ON 7073K20 ON* OFF ON* 7073K25 ILLUMINTED C TOGGLE SITCHES SELED H Green Red mber CODE LETTERS ND NUMERS DD TO SE CIRCUIT NUMER Lever Color ulb Voltage Termination G T Voltage Type 14V 14V Code Spade 52 1 Termination Type.250 Spade Code 52 * Momentary Contact. DIMENSIONS PPROXIMTE IN MM (INCHES) ILLUMINTED 5.33 (.210) Dia (.270) 1.78 (.070) (.650) (.750) (1.310) (.470) (.910) (1.430) 6.35 (.250).76 (.030) Ref..76 (.030) (1.310) 0.76 (.030) 1.78 (.070) Deep x ide 1.02 (.040) 2.03 (.080) uick Connect (.440) Type "" Dim. 2.14

15 Double Insulated Industrial and VDE DESCRIPTION This line of Double Insulated toggles comes in two versions: Industrial and VDE Class II. The VDE version has the VDE registration number and has been tested in accordance with VDE SPECIFICTIONS Lever Material and Finish: Durable high strength nylon. Contact Mechanism: uick-make/uick-break wipingaction. Contact Material: Movable Copper silverplated. Stationary ronze silverplated. pprovals: UL Recognized. CS Certified. VDE Registered (where noted). Refer to pages (IndustrialPurpose) for generalspecifications. 2 DOULE INSULTED SELECTION TLE Rating 16, 125V ac/dc 8, 250V ac/dc 1 Hp, 125V ac/dc 16, 125V ac/dc 8, 250V ac/dc 1 Hp, 125V ac/dc 16, 125V ac/dc 8, 250V ac/dc 1 Hp, 125V ac/dc Poles and Circuit with Toggle in UP CENTER DON Position Position Position () SE CIRCUIT SEE PGE4.28 SINGLEPOLE INDUSTRIL 1 P.S.T. ON NONE OFF TO POLE INDUSTRIL 2 P.S.T. ON NONE OFF C 2 P.S.T. ON NONE OFF C ushing Length mm (inches) VDE PPROVED (MEETS REUIREMENTS OF CEE PUL. 25) Lever Length mm (inches) CTLOG NUMERS Screw Terminals (.674) 7321K (.674) 7320K (.674) 7320K K20G152 Illuminated 7071K21T152 Illuminated VDE 8(8) 250V, T85C. DIMENSIONS PPROXIMTE IN MM (INCHES) 7320K K50 ND 7321K K21152 Illuminated (.780) (.78) (1.870) (.810) (1.87) (.81) 7320K55 Double Insulated 2.15

16 TOGGLE SITCHES Special Purpose Toggle Switches Panelboard Switches DESCRIPTION This group of two position power toggle switches is used by manufacturers in a wide variety of applications that require dependability and long service, such as welding equipment, commercial floor polishers, battery chargers, food processors and panelboards. SPECIFICTIONS Rating: 10-60, V. See selection table. Circuits: 1PST, 2PST, 3PST, 2 circuit. Maintained. Except for: 8980K13; Momentary. Contact Mechanism: uick-make/uick-break wiping action. Except for: 8980K13: uick-make/uick-break butt contact. Contact Material: Movable ronze. Stationary Copper. 8980K13 Silver. Type of Termination: Screw or bus. Termination Material: Copper. Mounting Means: Two Hole Mounting Panel Type Flush. Dielectric ithstand: 1,000 Volts RMS minimum. Operating Temperature Range: C to C (0 F to +150 F). pprovals: UL Recognized. CS Certified as noted. PNEL ORD SITCH SELECTION TLE (OLD FCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) Rating 60, 250V ac/dc 2 Hp, V ac/dc 30, 250V ac/dc 30, 125V T 2 Hp, V ac 30, 250V ac/dc 30, 125V T 2 Hp, V ac 30, 250V ac/dc 20, 600V ac 2 Hp, V ac 30, 250V ac/dc 20, 600V ac 2 Hp, V ac 3 Phase 60, 250V dc/575v ac 5 Hp, V ac 1 Phase 2 Hp, 125V dc 5 Hp, 250V dc 20, V ac 2 Hp, 240V ac 30, 250V ac/dc 2 Hp, 120V-240V ac 1 Hp, 480V ac 30, 250V ac/dc 2 Hp, V ac Poles and 2 P. S.T. 1P Double reak 1P uad reak 2 P. S.T. 3 P. S.T. 2 P.S.T. 2 P. S.T. (N.O.) 2 P. S.T. 2 P. S.T. Mounting Terminals CTLOG NUMERS 8980K1 Frame Plate Center us 8980K2 Frame Plate Center us 8980K3 Panel Type Strap Screw 8980K5 Panel Type Screw 8980K6 Panel Type us 8980K7 Panel Type Strap Screw 8980K13 R Panel Type Strap Screw 8980K14 E Panel Type Strap Screw 8980K16 For appliance use only; 32, 480V ac; V ac. CS Certified. E inding screws assembled. For binding screws provided unassembled, order 8980K30. R Suitable for side or back wiring. 2.16

17 8980K1 8980K2 8980K3 8980K5 8980K6 8980K7 8980K K K

18 TOGGLE SITCHES Special Purpose Toggle Switches Outlet ox 8337K2 DESCRIPTION The switch mechanism on this toggle switch is enclosed in a molded housing. one piece actuator block is provided with spring loaded detent plungers for feel and positioning to insure contact pressure and provide a substantial wear allowance. Large insulating barriers between terminals prevent electrical creepage and insure separation of loose wire strands. Metal parts visible when the switch is mounted are bright nickel plated. These switches have a flat zinc lever with an aluminum ball. SPECIFICTIONS Ratings: 20, 250V ac. 1-1/2 Hp, 115V ac 1-Ph. 2 Hp, 115V ac 3-Ph. 2 Hp, V ac 1through3 Ph. Circuits: 3PST maintained action. ON-NONE-OFF. Circuit Number E, see page Contact Mechanism: Slow-make/Slow-break buttcontact. Contact Material: Movable and Stationary Solidsilver. Terminal Type: Screw Terminals rass designed to accept #6-32 x6.35mm (.250 ) binding head (Cat. No )screws. Furnished unassembled. Mounting Means: O..M. Switches have countersunk mounting holes spaced for Outlet ox Mounting. Finish: Flat zinc lever with aluminum balltip. Options: Terminal screws assembled. ire clamps on terminal screws. pprovals: UL Recognized. CS Certified. DIMENSIONS PPROXIMTE IN MM (INCHES) 8337K2 (OUTLET OX MOUNTING) (.180) (.743) (1.500) (.200) (2.000) (2.370) (6) 6-32 X 6.35 (.25) Long Undercut inding Head Screw. ETON Catalog Number Shipped ssembled (.060) (3.280) 7.11 (.280) (2.390) (2.370) (1.000) (1.360) # Holes (3.320) (3.680) (1.500) (.750) (.500) Typ. 4 Plcs. 2.18

19 High Capacity Toggle Switch 7818K1 DESCRIPTION The heavy duty, high capacity switch (Cat. No. 7818K1) is ideal for exceptionally high power applications, heavy duty motor loads and for use in welding equipment or similar industrial applications. HIGH CPCITY OVERVIE Capacitive loads will result in a current inrush far exceeding normal operating current. In fact, the typical capacitive load inrush current, shown in Figure 2, is potentially more damaging to a switch than a typical inductive load inrush. The major difference is that the capacitive load can reach maximum inrush sooner. Generally, peak inductive load current inrush (figure 1) occurs after any switch contact bounce has subsided. In a capacitive load, however, switch contact bounce could occur at the same time as maximum current inrush, increasing the possibility of arcing, and of welding the switch contact. ETON has addressed this problem with its high inrush switch. y combining innovative design and quality materials, this switch is designed to carry the specified maximum inrush current for 10 milliseconds for a minimum of 20,000 On/Off cycles. SPECIFICTIONS Ratings: 40, 600V ac. 5 Hp, 250V ac. Circuits: 2PST maintained. Contact Mechanism: uick-make/uick break snap acting butt contact. Make: 200 peak inrush at 125V ac for 10 ms for 20,000 cycles minimum. reak: 20 at 125V ac for 20,000 cycles minimum. Contact Material: 10% silver cadmium oxide composite. Terminal Type: Screw Terminals rass (Cat. No ) supplied. Furnished unassembled. Mounting Means: Molded flush mounting bracket, high impact polycarbonate, 84.12mm (3.312 ), center-to-center spacing and 60.33mm (2.375 ) spacing for self-tapping screws. Lever: Nylon. ase: Molded thermoset material. Dielectric ithstand: 2200V RMS minimum. pprovals: UL to Standard 508, File E K2 Outlet ox Mounting 7818K1 High Capacity 2 DIMENSIONS PPROXIMTE IN MM (INCHES) (.781) 7818K (3.812) Mtg. (3.281) Max. (1.406) (1.250) Max. (2.250) INDUCTIVE (FIGURE 1) Typical Peak Current CPCITIVE (FIGURE 2) H Test Criteria Typical Initial Peak Current Current Current Time Time 2.19

20 TOGGLE SITCHES Special Purpose Heavy Duty and Heavy DutyHesitationSwitches DESCRIPTION One Hole Panel Mount These heavy duty toggle switches are available in either two or three position. The three position switches offer a unique positive center stop feature which assures that the lever cannot be thrown from one side through the center OFF position without stopping. This design feature is a major factor in their widespread acceptance for motor reversing and speed control applications. The most common application for the switch is to help prevent motor damage resulting from the high current generation by counter EMF of the armature at the time of reversing. This type of device is referred to within the industry as an anti-plugging, hesitation, positive stop or positive off switch. Typical applications include bench tools, coach and truck (electric lift) and X-Ray equipment. Flush Mount These three position switches also offer the positive center stop feature where the lever cannot be thrown from one side through the center OFF position without stopping. The high ratings of this series allow it to be used with a broad range of heavy duty applications. Copper contacts and brass screw terminals arestandard. ONE HOLE PNEL MOUNT SITCH SELECTION TLE Rating 14, 125V ac/dc 7, 250V ac/dc 3/4 Hp, V ac/dc 15, 125V ac 10, 250V ac 10, 125V ac/dc 5, 250V ac/dc 15, 125V ac 10, 250V ac 10, 125V ac/dc 5, 250V ac/dc 10, 125V ac/dc 5, 250V ac/dc 1/2 Hp, V ac/dc 15, 125V ac 10, 250V ac Poles and 2 P.D.T. Circuit with Toggle in UP CENTER DON Position Position Position ONE HOLE PNEL MOUNT () ON NONE ON ON OFF ON (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) SE CIRCUIT SEE PGE P.D.T. ON OFF ON D 3 P.D.T. ON OFF ON F 3 P.D.T. ON OFF ON F 4 P.D.T. ON NONE ON F 4 P.D.T. ON OFF ON F 4 P.D.T. ON OFF ON F D ushing Length Lever Length Lever mm (inches) mm (inches) Type ONE HOLE PNEL MOUNT CTLOG NUMERS Screw Terminals (.406) (.531) all 7814K (.406) (.531) all 7814K (.687) at 7992K (.406) (.531) all 7815K (.687) at 7991K (.406) (.531) all 7815K (.406) (.531) all 7816K (.687) at 7990K10 Listed Rating for 125V ac also applies at 28V dc. Not UL Recognized. FLUSH MOUNT SITCH SELECTION TLE Circuit with Toggle in Rating Poles and UP CENTER DON Position Position Position Lever Type Type of Termination CTLOG NUMERS () FLUSH MOUNT SITCH FLUSH MOUNT SITCH 20, 125V ac/dc 10, 250V ac/dc 2 P.D.T ON NONE ON ON OFF ON Square Screw 7810K1 Square Screw 7810K2 30, 125V ac/dc 20, 250V ac/dc 2 P.D.T. ON OFF ON 3 P.D.T. ON OFF ON 4 P.D.T. ON OFF ON Square Screw 7811K2 E Square Screw 7812K2 Square Screw 7813K CS Certified. lso rated 5, 600V ac; 1-1/2 Hp, 250V dc; 2 Hp, 240V ac. Elso rated 2 Hp, 250V ac/dc.

21 SPECIFICTIONS Ratings: See selection tables. Circuits: 2PDT, 3PDT, 4PDT. Maintained action. Contact Mechanism: One Pole Panel Mount C Rated Devices Slow-make/Slow-break butt contact. C/DC Rated Devices uick-make/uick-break wiping contacts. Flush Mount uick-make/uick-break wiping contacts. Contact Material: One Pole Panel Mount C Rated Devices Movable Silver plated copper with fine or coin silver contact face button. Stationary Copper with fine or coin silver contact face button. C/DC Rated Devices Movable Copper. Stationary ronze. Flush Mount Movable Copper. Stationary Copper. Terminal Types: Screw Terminals rass. Mounting Means: One Pole Panel Mount C Rated Devices Threaded ushing mm (.468 ) dia., 32 threads/inch x.89mm deep (.068 x.035 deep), provide anti-rotation feature. Hardware Supplied 1 hexagon locknut (Cat No ) and 1 hex facenut (Cat No ). Furnished unassembled. C/DC Rated Devices Threaded ushing mm (.750 ) dia., 32 threads/inch x 2.64mm (.102 x.104 ) x 1.04 x 1.09mm ( ) deep. Hardware Supplied 2 hexnuts (Cat No ). Furnished unassembled. Flush Mount Flush mounting panel tabs. Dielectric ithstand: 1,000V RMS minimum. Operating Temperature Range: C to C (0 F to +150 F). pprovals: UL Recognized (except where noted). CS Certified (where noted). 7814K2 Panel Mount 7815K1 Panel Mount K2 Flush Mount 7811K2 Flush Mount 2.21

22 TOGGLE SITCHES Special Purpose Heavy Duty and Heavy Duty Hesitation Switches (continued) ONE HOLE PNEL MOUNT DIMENSIONS PPROXIMTE IN MM (INCHES) 7814K2 2PDT 7815K1 3PDT x D. ( ) ( ) x D. ( ) ( ) (.531) (3/4-32 T.P.I.) (.531) (3/4-32 T.P.I.) (.484) (1.125) (1.125) (1.000) (2.093) (1.312) (2.000) (2.000) 7990K10 4PDT (.710) 15/32-32 Thds (.690) (1.550) Max (1.450) Max (.470) 1.78 (.070) 7.62 (.300) (.970) (1.320) 6-32 X.188 inding Head Screw 2.22

23 FLUSH MOUNT DIMENSIONS PPROXIMTE IN MM (INCHES) 7810K2 2PDT 7811K2 2PDT (3.781) (3.281) (3.781) (3.281) (.968) (1.312) (1.593) (1.859) (3.781) (1.593) (2.937) (1.812) 7813K2 4PDT (3.781) (3.281) (3.281) (1.312) (1.890) (2.937 ) (.406) 2.23

24 TOGGLE SITCHES Military Purpose Toggle Switches DESCRIPTION Eaton s Military Purpose switches are designed to meet the requirements of MIL-S or JN-S-23. Sealed Switches have a silicone rubber lever seal assembled between the lever and the bushing to resist the entrance of contaminants such as dust, sand or water into the contactstructure. The switch mechanisms are completely enclosed to resist the entrance of contaminants into the switch. ll metal parts are plated to resist corrosion. The Heavy Duty Switches are offered in both Standard Toggle Lever and Lever Lock versions. Circuit designations are stamped on the side of each switch. SPECIFICTIONS Ratings: See selection table. Circuits: 1PST, 1PDT, 2PST, 2PDT, 1P3T (ON-ON-ON), 4PST and 4PDT. Maintained and momentary action. Contact ction: Heavy Duty Slow-make/Slow-break buttcontact. Medium Duty uick-make/uick break, wipingaction. Contact Material: Heavy Duty Movable Silver plated copper with fine or coin silver contact facebutton. Stationary Copper with fine or coin silver contact face button. Medium Duty Movable Copper silver plated. Stationary ronze silver plated. C/DC RTED (MEDIUM DUTY) MIL-S SITCHES SELECTION TLE Rating E E Poles and Circuit with Toggle in UP CENTER DON Position Position Position SE CIRCUIT SEE PGE4.28 () SINGLE POLE ON NONE OFF 1 P.S.T. ON NONE OFF* OFF NONE ON* 1 P.D.T. ON ON NONE NONE ON ON* DOULE POLE ON NONE OFF 2 P.S.T. ON NONE OFF* C OFF NONE ON* 2 P.D.T. ON ON NONE NONE ON ON* D Dimension mm (inches) (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) Dimension mm (inches) CTLOG NUMERS Military or JN (ST) Solder Lug Terminals MIL-S Catalog ith Sealed Lever Number SINGLE POLE (.906) MS K (.906) MS K (.906) MS K (.937) MS K (.937) MS K26 DOULE POLE (.906) MS K (.906) MS K (.906) MS K (.937) MS K (.937) MS K26 * Momentary Contact. CURRENT RTINGS Code From Selection Table E Part Number ll MS25098 MS , 29, 30 MS , 26 CURRENT CPCITY IN MPERES PER POLE 125V ac, 60 Hz Resistive Inductive Load Load

25 Terminal Types: Heavy Duty MIL-S Types Screw Terminals rass designed to accept #6-32 x 6.35mm (.250 ) pan head (Cat. No ) screws and Si bronze #6 Helical lockwasher (Cat. No ). Furnished unassembled. Terminal screws are tin dipped to facilitate soldering if required. Heavy Duty Jan-S-23 Types Screw Terminals rass designed to accept #6-32 x 4.78mm (.188 ) binding head (Cat. No ) screws. Furnished unassembled. Solder Lug Terminals Tintillate plated brass. Medium Duty MIL-S Types Solder Lugs rass silver plated furnished with 2.39mm (.094 ) dia. hole. ase Material: Thermoset molding material. Mounting Means: Threaded ushing mm (.468 )dia., 32 threads/inch x.89mm deep (.068 x.035 deep) provides anti-rotation feature. Hardware Supplied MIL-S Types: 2 hexagon facenuts (Cat. No ), 1 locking ring (Cat. No ) and 1 internal tooth lockwasher (Cat. No ). Furnished unassembled. Jan-S-23 Types: 2 hexagon facenuts (Cat. No ). Furnished unassembled. Dielectric: 1000V RMS minimum. Operating Temperature Range: C to C (0 F F). 8261K22 Medium Duty 2 DIMENSIONS PPROXIMTE IN MM (INCHES) 1PDT MINTINED CTION (SOLDER LUG) (.070) (.687) 14 15/32-32NS (.680) 1.01 (.040) 8262K22 Medium Duty Dim (.937) Dim (.906) (Ref.) 2.03 (.08) Dia. end terminal (1.25) 2.29 (.09) Dia. center terminal 2PDT MINTINED CTION (SOLDER LUG) (.680) 1.78 (.070) 8801K22 Heavy Duty (.687) 15/32-32NS (.040) (Ref.) Dim (.937) Dim (.906) (Ref.) 2.03 (.080) Dia. end terminal (1.25) 2.29 (.090) Dia. center terminal 8820K16 Heavy Duty 2.25

26 TOGGLE SITCHES Military Purpose Toggle Switches (continued) C Rated (Heavy Duty) MIL-S Switches with Lever Seal C RTED (HEVY DUTY) MIL-S SITCHES SELECTION TLE Rating E E R R R R E E R R R T T T T T T Y Y U U U Y Y U U U Poles and 1 P.S.T. Circuit with Toggle in UP CENTER DON Position Position Position ON NONE OFF ON OFF NONE ON NONE OFF* ON OFF* NONE NONE OFF ON* OFF NONE ON* SE CIRCUIT SEE PGE4.28 ON OFF ON ON NONE ON 1 P.D.T. ON NONE ON* ON* OFF ON* ON OFF ON* TO POLE 2 P.S.T. ONE POLE () ON NONE OFF ON OFF NONE ON NONE OFF* ON OFF* NONE NONE OFF ON* OFF NONE ON* ON OFF ON ON NONE ON 2 P.D.T. ON NONE ON* D ON* OFF ON* ON OFF ON* ON I ON O ON P 1 P.3.T ON I ON O ON*P See ON*I in a ON O ON*P Diagram 2P ase ON I ON { ON P ON I ON { ON*P On Page 4.28 ON*I ON { ON*P FOUR POLE ON NONE OFF ON OFF NONE 4 P.S.T. ON OFF* NONE E NONE OFF ON* OFF NONE ON* ON OFF ON ON NONE ON 4 P.D.T. ON NONE ON* F ON* OFF ON* ON OFF ON* C ushing Length mm (inches) (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) Lever Length mm (inches) ONE POLE MS Part Number CTLOG NUMERS Screw Terminals with Sealed Lever Catalog Number (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K16 TO POLE (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K7 } (.687) MS K8 } (.687) MS K9 } FOUR POLE (.687) 7660K (.687) MS K (.687) MS K (.687) MS K (.687) 7666K (.687) MS K (.687) MS K (.687) MS K (.687) MS K (.687) MS K6 * Momentary Contact. CURRENT RTINGS Code From Selection Table E R T Y U I O P { } CURRENT CPCITY IN MPERES PER POLE Switch Type of 28V dc 115V ac, 60 Hz 115V ac, 400 Hz Operation Lamp Resistive Inductive Lamp Resistive Inductive Lamp Resistive Inductive Load Load Load Load Load Load Load Load Load MS35058 Maintained Momentary MS35059 Maintained Momentary MS25201 ON-ON-ON MS25068 Maintained Momentary cross terminals 2-3 and 5-6. cross terminals 1-2 and 5-6. cross terminals 1-2 and 4-5. cross terminals 2-3 and 4-5. For INDEPENDENT ON-ON-ON circuit arrangement see page

27 DIMENSIONS PPROXIMTE IN MM (INCHES) ONE POLE MINTINED & MOMENTRY CTION TO POLE MINTINED CTION 15/32-32 Thds (.620) 0.76 (.030) Deep 1.52 (.060) ide 0.76 (.030) Deep 1.52 (.060) ide 15/32-32 Thds (.750) (1.120) (1.040) (1.310) (1.060) 8858K39 Heavy Duty #6-32 x 4.57 (.180) Long Pan Head Screws #6-32 X 6.35 (.250) Pan Head Screws TO POLE MOMENTRY CTION & 3 ON CIRCUITS FOUR POLE MINTINED & MOMENTRY CTION 15/32-32 Thds (.030) Deep 1.52 (.060) ide (.750) 15/32-32 Thds (1.430) 0.76 (.030) Deep 1.52 (.060) ide 8859K44 Heavy Duty (1.310) (1.200) (1.320) (1.250) #6-32 X 6.35 (.250) Pan Head Screws #6-32 X 6.35 (.250) Long Pan Head Screws 7301K36 Heavy Duty 7310K38 Heavy Duty 2.27

28 TOGGLE SITCHES C RTED (HEVY DUTY) MIL-S LEVER LOCK SITCHES SELECTION TLE Rating E Poles and Circuit with Toggle in UP CENTER DON Position Position Position ONE POLE () SE CIRCUIT SEE PGE4.28 ON NONE OFF 1 P.S.T. ON NONE OFF ON OFF NONE ON OFF ON 1 P.D.T. ON NONE ON ON NONE ON TO POLE ON OFF ON 2 P.D.T. ON OFF ON C ON NONE ON FOUR POLE 4 P.D.T. ON NONE ON F Military Purpose Toggle Switches (continued) C Rated (Heavy Duty) MIL-S Lever Lock Switches with Lever Seal Lever Lock ushing Style (see below) ushing Length mm (inches) (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) Lever Lock Length mm (inches) ONE POLE MS Part Number CTLOG NUMERS Screw Terminals with Sealed Lever Catalog Number (.562) (1.000) MS25125-C2 8857K (.562) (1.000) MS25125-E2 8857K (.562) (1.000) MS25125-J4 8857K (.562) (1.000) MS K (.562) (1.000) MS25125-C3 8857K (.562) (1.000) MS25125-E3 8857K44 TO POLE (.562) (1.000) MS K (.562) (1.000) MS K (.562) (1.000) MS25126-E3 8858K44 FOUR POLE (.562) (1.000) MS25127-E3 8859K44 Indicates direction against which lever is locked. CURRENT RTINGS Code From Selection Table E Switch MS25125 MS25126 MS25127 Type of Operation Maintained Maintained Maintained CURRENT CPCITY IN MPERES PER POLE 28V dc 115V ac, 60 Hz 115V ac, 400 Hz Lamp Resistive Inductive Lamp Resistive Inductive Lamp Resistive Inductive Load Load Load Load Load Load Load Load Load DIMENSIONS 15/32-32 Thds (.620) (1.140) PPROXIMTE IN MM (INCHES) SINGLE POLE DOULE POLE FOUR POLE #6-32 Screws 0.76 (.030) Deep 1.52 (.060) ide (1.120) 0.76 (.030) Deep x 1.52 (.060) ide 15/32-32 Thds (.900) (1.310) #6-32 Screws (1.250) (1.310) (1.590) 0.76 (.030) Deep 1.52 (.060) ide 15/32-32 Thds (1.310) #6-32 Screws LEVER LOCK USHING STYLES STYLE 1 STYLE 2 STYLE 3 STYLE 4 STYLE 5 Locked In Three Positions Locked In Center Positions Locked In Side Locked Out Of Center Position Locked In Center nd Side Opposite For pictoral representation only keyway on right hand side. 2.28

29 Military Purpose Toggle Switches (continued) C Rated (Heavy Duty) Military (Jan-S-23 Equivalents) with Unsealed Lever C RTED (HEVY DUTY) MILITRY JN-S-23 EUIVLENTS SELECTION TLE Rating E R R E E R R R Poles and Circuit with Toggle in UP CENTER DON Position Position Position ONE POLE () SE CIRCUIT SEE PGE4.28 ON NONE OFF 1 P.S.T. ON NONE OFF* OFF NONE ON* ON OFF ON ON NONE ON 1 P.D.T. ON NONE ON* ON* OFF ON* ON OFF ON* TO POLE ON NONE OFF 2 P.S.T. ON NONE OFF* C OFF NONE ON* ON OFF ON ON NONE ON 2 P.D.T. ON NONE ON* D ON* OFF ON* ON OFF ON* ushing Length mm (inches) ushing Length mm (inches) (OLDFCE TYPE INDICTES ITEMS NORMLLY IN DISTRIUTOR STOCK) Solder Lug Terminals Former Jan-S-23 with Unsealed Lever ONE POLE CTLOG NUMERS Catalog Number Former Jan-S-23 with Unsealed Lever Screw Terminals Catalog Number (.688) ST K38 ST K (.688) ST K38 ST K (.688) ST-42C 7303K38 ST-40C 7303K (.688) ST-42E 7301K38 ST-40E 7301K (.688) ST-42D 7302K38 ST-40D 7302K (.688) ST-42F 7307K38 ST-40F 7307K (.688) ST-42G 7306K38 ST-40G 7306K (.688) ST-42H 7305K38 ST-40H 7305K36 TO POLE (.688) ST-52K 7310K38 ST-50K 7310K (.688) ST-52L 7314K38 ST-50L 7314K (.688) ST-52M 7313K38 ST-50M 7313K (.688) ST-52P 7311K38 ST-50P 7311K (.688) ST-52N 7312K38 ST-50N 7312K (.688) ST-52R 7317K38 ST-50R 7317K (.688) ST-52S 7316K38 ST-50S 7316K (.688) ST-52T 7315K38 ST-50T 7315K36 2 * Momentary Contact. CURRENT RTINGS Code From Selection Table E R Type of Operation Maintained Momentary Maintained Momentary CURRENT CPCITY IN MPERES PER POLE 30V dc 125V ac, 60 Hz 250V ac, 60 Hz Lamp Resistive Inductive Resistive Inductive Horse Resistive Inductive Horse Load Load Load Load Load Power Load Load Power ONE POLE ONE POLE TO POLE TO POLE DIMENSIONS PPROXIMTE IN MM (INCHES) 1PDT MINTINED CTION 2PDT MINTINED CTION 2PDT MOMENTRY CTION (1.120) 15/32 Dia D. X ( ) ( ) (.62) (1.040) #6-32 X 4.57 (.180) Long inding Head Screw 15/32-32 Thds (.750) D. X ( ) ( ) 0.76 (.030) Ref (.180) (.760) 6.86 (.270) 1.02 (.040) (.910) 7.62 (.300) D. ( ) 0.76 (.030) Ref. X (.750) ( ) (.800) 2.29