Locking power rocker switches
|
|
- Lynne Mosley
- 6 years ago
- Views:
Transcription
1 SWKL709 DISTINCTIVE FETURES One protected position Patented intuitive ergonomics Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP9K ENVIRMENTL SPECIFICTIS Sealing options : K : IP8 to front panel components of switch only according to IEC 09 Z : IP9K panel sealing according to DIN 0009 Salt spray resistance : 9 hours according to IEC, test f Operating temperature : 0 C to +8 C (0 F to +8 F) ELECTRICL SPECIFICTIS Currrent/voltage rating with resistive load : Silver plated contacts : : VDC, 00,000 cycles 0 VDC, 0,000 cycles (terminals. x 0.8 only) S : 0 V, 0,000 cycles (see Build your part number ) Gold plated contacts (D) : 0 m V, 0,000 cycles Initial contact resistance : 0 mω max. Insulation resistance :,000 MΩ min. at 00 VDC Dielectric strength :,000 Vrms 0 Hz min. between terminals Mechanical life : 0,000 cycles min. GENERL SPECIFICTIS Mechanical life : 0,000 cycles min. Panel thickness : 0.8 mm to. mm Recommended panel thickness : between mm and. mm The company reserves the right to change specifications without notice.
2 MTERILS PNEL CUTOUT Case : P ctuator : BS Unlocking actuator : BS or elastomeric membrane Bezel : P Contacts & terminals : brass, solid silver grain, silver plated ( or S) or brass, solid silver grain, gold plated (D) Contact roller : brass, nickel plated.80 0/+0. (.9 0/+.0).08 0/+0. (.80 0/+.0) SELING CKRDEC Sealing is optional. To order a sealed product, complete the appropriate box of ordering format on the following pages. MTRIX MOUNTING SPECIFIC MTRIX MOUNTING FOR Z VERSI.00 mini (.98 min.).00 (.7) 7.00 mini (.0 min.) m (.) (.909 m.7 ( mini (.80 min.) 0.0 (.0) 7.00 mini (.0 min.) mini (.) (.909 min.).70 (.0)
3 ELECTRICL FUNCTIS ND CNECTIS In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is represented. For single pole models, only terminals, and are to be considered (not,, ). x = w/o terminal o = with terminal = momentary POSITIS POSITIS Press unlocking actuator to unlock. Function * KLKL Function 7 KL7KL7 Function KL KL Function 8 KL8KL8 Function KLKL Function 9 KL9KL9 * Function : Only available for terminal versions, illuminated versions only available with wiring. Function KL Function R KLR TERMINLS Ø.00x0.0 SI (.8DIx0.0 IS) Ø.0 (.DI) Ø.0 (.07DI). (.) 0.80 (.0).0 (.77).x0.80 (.x.0).80x0.80 (.0x.0) Screw Solder lug / quickconnect Normalized quickconnect.x0.8 Normalized quickconnect.8x0.8
4 BUILD YOUR PRT NUMBER To order a complete product, fill in all the boxes of the following order guide. KL Side B SERIES ELECTRICL FUNCTIS CTCTS SELING WIRING POLES Single pole Double pole R D S Silver Gold plated Silver 0 *** Function only for terminal versions. Functions and cannot be combined with H wiring. TERMINLS Screw Solder lug/quickconnect Normalized quickconnect.x0.8 0 terminals with barrier terminals with barrier terminals with barrier terminals w/o barrier terminals w/o barrier 0 term. with barrier D 0 term. with barrier B 0 term. w/o barrier C 0 terminals for use with connector U9 E F X K Z 0 term. w/o barrier 0 term. for use with connector U9 No IP8 IP9K X B C M R D E None LED V red LED V green LED V yellow LED V blue LED V white LED V red LED V green LEDS Normalized quickconnect.8x0.8 G H J 0 term. with barrier 0 term. w/o barrier 0 terminals for use with connector U8 F N S J K L P T etc. See following pages. LED V yellow LED V blue LED V white LED V red LED V green LED V yellow LED V blue LED V white *** S contacts for all functions except and R for normalized quickconnect terminals.x0.8 only. rea rea B TYPE For nonilluminated application For illuminated application Blue / Dark blue Black ROCKER COLOR Green Grey Yellow Blue / Dark blue Black Green Grey UNLOCKING COLOR Hard plastic (BS) Red 7 Ivory 9 Orange Yellow Red 7 Ivory 9 Orange Elastomer SYMBOLS NOTICE : please note that not all combinations of above numbers are available. Refer to following pages for further information. Y R G Yellow Red Green MRKING ORIENTTI N Symbols & ccessories : see end of the series. B MRKING COLOR Illuminated models Blank White Nonilluminated Blue Black Green Grey Yellow Red 7 White 9 Orange
5 FLT SEL KL Double pole 7.00 (.80) KL KL* KLR*.00 (.98).0 (.09) Single pole KL KL KL KL KL7 KL7 KL8 KL8 KL9 KL9.0 (.98) TERMINL VERSI.00 (.) *Function : single pole in double pole case FLT SEL Single pole Double pole KL KL KL* KLR* CKL9DTS.00 (.98) 7.00 (.80).0 (.09) KL KL KL KL KL7 KL7 KL8 KL8 KL9 KL9.0 (.98) 0.00 Max (.99 Max) 0 TERMINL VERSI.00 (.) *Function : single pole in double pole case U8 CKL9DT0S TERMINLS SCREW terminals with barrier B C terminals with barrier terminals w/o barrier 0 terminals with barrier 0 terminals w/o barrier 0 terminals for use with connector U9 or U Ø.00x0.0 SI (.8DIx0.0 IS). (.) screw 0.80 (.0) Ø.0 (.DI).0 (.77) 0 SOLDER LUG / QUICKCNECT.x0.80 (.x.0) Solder lug / quickconnect
6 TERMINLS (CTINUED) NORMLIZED QUICKCNECT.X0.8 NORMLIZED QUICKCNECT.8X0.8 terminals with barrier terminals w/o barrier D 0 terminals with barrier E 0 terminals w/o barrier F 0 terminals for use with connector U9 or U G H J 0 terminals with barrier 0 terminals w/o barrier 0 terminals for use with connector U8 Ó &+# Ø.0 (.07DI).80x0.80 (.0x.0) Z Z Normalized quickconnect.x0.8 Normalized quickconnect.8x (.80).8 (.0).0 (.) 7.0 (.80) 9.0 (.8).0 (.) 9.0 (.8).8 (.0).8 (.9).0 (.).0 (.).8 (.9) 0 TERMINL VERSI TERMINL VERSI CKLCO CKLCO Terminals are marked on the case. The drawings show the maximum possible number of terminals. D S FICHIER: CKLCOP ECHELLE: 0. indice le 8/0/08 CTCT MTERILS FICHIER: CKLCOP ECHELLE: 0. indice le 8/0/08 Silver Silver, gold plated Silver 0. For all functions except and R for normalized quickconnect terminals.x0.8 only.
7 SELING X K Z No sealing IP8 (front panel components of switch only) IP9K Installation notice available on request Ultrasonic welding of frame to case is standard on all versions. The ultrasonic welding and the optional panel seal prevent water and dust from introducing into the switch housing. optional seal optional seal K Z LEDS Side B Complete enlarged box with one of the codes listed below. X Without LED Red Green Yellow Blue White mber Red/green VDC B C M R VDC D E F N S VDC J K L P T No resistor U V W Y Z 9 8 Side B LED consumption : 0 nominal voltage ( C / 77 F) Other illumination solutions : on request. CKLIL FICHIER: CKLILP ECHELLE: 0. indice le 8/0/08 WIRING The LED wiring diagram is shown on the case. FOR TERMINL VERSIS LED CNECTED TO THE LOD + standard + CKLRL + B CKLRLB C CKLRLC E CKLRLEB + + F CKLRLF Note : If not available, terminals are added to connect the LED
8 WIRING (CTINUED) FOR 0 TERMINL VERSIS INDEPENDENT LED OR INTEGRTED FUNCTIS G H I Standard, to have independent LED. To obtain symbol illumination levels (night illumination when and higher illumination when ). Dotted line = external wiring, continuous line = internal wiring vailable in Single Pole only, with H and J quickconnect terminals To have a polarity inversion (typical application : fan motor). Dotted line = external wiring Power supply betweeen and Load between and or and. vailable with H and J quickconnect terminals. Please contact us for other wiring solutions R 8 7 R G H I TYPE For nonilluminated application For illuminated application ROCKER COLOR Blue / Dark blue Black Green Grey Yellow Red 7 Ivory 9 Orange Note : color 7 not available on illuminated versions 8
9 UNLOCKING HRD PLSTIC (BS) / ELSTOMER 7 9 Blue Dark blue Black Green Grey Yellow Red Ivory Orange Y R G Yellow Red Green MRKING ORIENTTI If no marking required, complete the box with code N. Other orientations : on request N XX SYMBOLS CKLM CKLM B No symbol vailable symbols Complete each box with the one of the codes listed on the B enlarged following pages. Laser etching resistance CKLM Water and petrol resistant acccording to EN08 FICHIER: CKLMP Tear resistant (crosscut test) according to NF ISO 09 : class 0 ECHELLE: 0. indice UV resistant according to ISO 89 B le 8/0/08 Marking area The symbol will be included in the hatched area. FICHIER: CKLMP ECHELLE: 0. indice le 8/0/08.90 (.).0 (.0).0 (.09).90 (.).0 (.09).0 (.0) CKLM.0 (.).70 (.9) For nonilluminated versions.70 (.9) For illuminated versions.00 (.).00 (.) CKLZL FICHIER: CKLZLP9 CKLZL 9
10 MRKING COLOR ILLUMINTED MODELS LSER ETCHING NILLUMINTED MODELS PD PRINTING Blank White Blue Black Green Grey Yellow Red 7 White 9 Orange 0
11 K range Power rocker switches and indicators symbols and accessories Most symbols meet the ISO 7000 standard graphical symbols for use on equipment (code given in bracket in the description). Contact us for symbols not featured in the following tables. CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI XX None Revolving light Emergency first aid vehicle () 0 7 Rear ventilator Load tipping (7) 0 8 Heating (07) Loading light (7) 0 9 Door opening Tractor, rearward (7) 0 0 Windshield demister/ defroster (0) Combine, direction of movement (78) 0 Windshield wiper (008) 7 Use no forks (0) 0 Windshield washer (0088) 8 Transmission () 07 Stop Ventilator fan (0089) 9 Working spot light () 08 Motion Side mirror defroster 0 Engine (00) 09 Up motion Restarting pump Horn (0) 0 Down motion Front fog lights (0) Lock () Hot 7 Rear fog lights (0) Taxi sign light () Cold 8 Propulsion system trim Working light (0) Hazard warning (008) 9 Beacon () Working light symmetric (0) Traveller lighting 0 nchor Driver lighting ( ) Electric motor (00) 7 The company reserves the right to change specifications without notice.
12 K range Power rocker switches and indicators symbols and accessories CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI 8 ll wheel drive 9 Engine idle control 90 ECS reset 9 Differential lock () 70 Cruise res/set 9 Driver windows heating 0 7 Driver windows up/ down 9 Cruise set 7 Middle door opening 9 ir bag up/down 7 Front door opening 9 Read lighting 7 Lighting in baggage room 9 Lighting main switch Rear window wiper (0097) 7 Cruise on/off 9 Heating using water Rear window washer (0099) 7 TV 97 Low beam Lower load () 77 Pump 98 Position lights 7 Cab lock (0) 78 Toilet 99 Diesel acceleration 8 Extraction 79 Toilet decontamination Manual mode 9 Pumping in 80 Front windshield heating Clockwise cabin rotation 0 Rear PTO (7) 8 us nticlockwise cabin rotation Front PTO 8 Radiator fan Rockshaft down 8 Remove retarder Rockshaft up 8 Restricted speed Parking brake Indicator 8 Preheater 7 Brake release 8 BS detection 8 Baggage room left door 87 ECS detection 9 7 Baggage room right door 88 Engine stop 8 Power blinds 89 Cruise res/cancel B
13 K range Power rocker switches and indicators symbols and accessories CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI C V D W E Y F Z G Battery charging condition (07) B H Turn signals (008) B J High beam (008) B K L M N P Q R S T U Differential lock, bogie (00) Brushing with a rotating brush (0070) Differential lock, transfer case x (7) Loader bucket, float () Loader bucket (7) Rear window washer & wiper (0098) Header, Header drive (79) Excavator/backhoe boom side shift (09) Chemical water treatment (8) Grapple skidder, single funct boom (7) Legend scale Depending on space available on the product (see Symbols section at the end of each series).
14 K range Power rocker switches and indicators symbols and accessories MOUNTING PNELS MOUNTING PNEL END MOUNTING PNEL MIDDLE SINGLE MOUNTING PNEL.00 (.0).00 (.0).00 (.0).80 (.0).0 (.0) 9. (.).80.0 (.0) (.0). (.0).80.0 (.0) (.0). (.70) U U U7 Recommended panel thickness :.0 mm.80 mm.0 mm.0 mm.0 mm mm.80 mm MOUNTING PNEL CUTOUT.00 0/+0.0 (.98 0/+.008).00 0/ /+0.0 (.008 0/+.008) (.0 0/+.008) For additional elements, add.0 mm (.09) 8.0 0/+0.0 (.898 0/+.008) 8.0 0/+0.0 (.898 0/+.008) 8.0 0/+0.0 (.898 0/+.008) For element U7 For elements U For elements (xu + x U)
15 K range Power rocker switches and indicators symbols and accessories X DPTERS FRT PNEL DISMOUNTING RER PNEL DISMOUNTING PNEL CUTOUT.00 0/+0. (.8 0/+.00) 0.00 (.99) 0.00 (.99).00 0/+0. (.7 0/+.00) (.8) (.78) (.98) (.8) (.78).00 (.98) U00 U070 Recommended panel thickness U mm to.0 mm U070.0 mm 0./0 to.0 mm 0./0 in stages of 0.0 mm dapter colors (replace 0 with code) / Dark blue Black Grey Yellow Red 7/ White REMOVING TOOL Extract actuator (KR only) llows the extraction of the rocker / rocker support assembly. Place the claws under the support and push as indicated by the arrow. Extract rocker (KR only) llows to separate the rocker from its support. Insert the tool between rocker and support as indicated by the arrrow. Pull out the tool in the opposite direction. Extract switch (KR, KL and KI) llows to extract switch from panel mounting units. Tools are necessary. Insert the tools between switch and panel mounting units from the rear to compress the snapin device. Pull off switch manually. U0 tools are supplied BLNKING CPS Usefull for future extensions. Connectors can be hanged on specific hole plugs. Contact PEM..0 (.8).0 (.09) U7 Blue U7/ Dark blue U7 Black U7 Green U7 Grey U7 U7 U77 U79 Yellow Red Ivory Orange.00 (.8) (.7) (.89).00 (.98) Recommended panel thickness :.0 mm to mm.80 (.8)
16 K range Power rocker switches and indicators symbols and accessories CNECTORS Standard color : black. Other colors : on request. Connectors cannot be combined with wiring types H and I. U0 terminal version. For use with terminals type,, or.. (/) tabs to be fitted by the user (example : TE8). Can be used for the KG series. U8 0 terminal version. For use with terminals type H or J..8 (.0) tabs to be fitted by the user (example : MP/Tyco ). U9 0 terminal version : For use with terminals type B, C, E or F.. (/) tabs to be fitted by the user (example : TE8). U 0 terminal version. For use with terminals type B, C, E or F.. (/) tabs to be fitted by the user (example : "Timer" terminals TE978).00 (.77).0 (.).00 (.98).0 (.).0 (.9) 9.0 (.7) U0.00 (.) 0.80 (.89) U9.00 (.) 0.80 (.89).0 (.) U (.) (.9) 0.0 (.80) 9.0 (.7) U
Power rocker switches with protection guard
Distinctive features and specifications Protected against accidental actuation SWKH709 Wide choice of colors Laser etched or pad printed symbols Illuminated or nonilluminated Sealed to IP9K ELECTRICAL
More informationAttractive rugged rocker switch
istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols
More informationAPEM. K range. Power rocker switches and indicators. Unique rocker design
APEM K range Power rocker switches and indicators Wide range Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 Unique rocker design K range Power rocker switches and indicators
More informationFP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large
More informationFP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight
More informationAttractive rugged rocker switch
istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols
More informationPower rocker switches
Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationCommon features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
More informationAV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
More informationFully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
istinctive features and specifications Full actuator or symbol illumination UG1410R1 Suited for integrated designs Large but lightweight Sealed to IP69K Pad printed or laser etched symbols Pad printing
More informationSealed Vehicle Rocker (SVR)
Sealed Vehicle Rocker (SVR) SEALED VEHICLE ROCKER SVR SVR Series TABLE OF CONTENTS Description How to Order - Descriptions - Dimensions 6- Icons Page Back DESCRIPTION Eaton is excited to present the Sealed
More informationGeneral Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
More informationIL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
More informationRoHS. Specifications. Part Number Configurator
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:
More information600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN
SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings
More informationIR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel
More informationVarious rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS
00 series istinctive features and specifications Three rocker shapes : plain, Vshaped or concave Various rocker colours Frame with protection guard on 00LP models Illuminated or nonilluminated UL, CSA,
More information600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationIR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationQ SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
More informationAPEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large
More informationAV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
More information2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
More informationIP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS
More informationQ SERIES Ø16mm (.630") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification VOYC1603R1US Features 16mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
More informationT80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
More informationMomentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
More informationThermal Circuit Breaker / Switch Series 3131
Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and ON/OFF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationAPEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features
More informationIQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
More informationQ19 series. Ø19 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q19-17-07 LED INDICATORS DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins
More information8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
More informationT Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
More informationSwitch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
More informationC&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
More informationQ16 series. Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q16-17-07 LED INDICATORS DISTINCTIVE FEATURES Secret until lit polycarbonate decals or custom engraving 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs (2.8 x 0.8) solder lug/faston
More information4.4. Rockers. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Rockers Dual Motion Safety Switches Dual Motion Safety Switch Contents Description Dual Motion Safety Switches Catalog Number Selection................ Dimensions........................... Page V11-T-39
More information2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
More informationTP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
More information1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationSMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features
Distinctive features ENTIRELY DESIGNED FOR SURFCE MOUNT Surface mount devices (SMD) are subjected to more stringent constraints of temperature, solderability and space savings than through-hole components.
More informationKiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationThermal Circuit Breaker / Switch Series 3131
Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours and legends, with optional illumination.
More informationN W. Thermal Circuit Breaker / Switch Series Description. Typical applications Circuit breaker. Technical data
Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours
More information7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More informationPOWERKEY PRO PRODUCT ACCESSORY CATALOG
POWERKEY PRO PRODUCT ACCESSORY CATALOG Looking for the right legend for your PowerKy Pro? Browse through our catalog of in-stock accessories to meet your PowerKey Pro needs. For more information about
More informationMiniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More informationThermal Circuit Breaker / Switch Series 3131
Thermal Circuit Breaker / Switch Series 33 Description Combination of single pole circuit breaker and N/FF switch with soft-touch rocker actuation. Contoured rockers are available with a choice of colours
More information7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More informationT80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More informationQ22 series. Ø22 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q22-17-07 DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.8) solder lug/faston terminals,
More informationIP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67
More informationWe Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
More information600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More information1 change over contact. 1 make contact. 1 break contact
Uni Uni is one of the smallest two pole switches available today. The are capable of producing eight functions depending on PC board layout. The Uni switch is available in momentary and alternate action
More informationC&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
More informationC&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
More informationA1-A01-A02-A03 series
A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or
More informationL-Series Sealed Rocker Switches
L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative
More informationThermal Overcurrent Circuit Breaker 3130
Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available either with protection on one/both/all
More informationIllumination. SWF Compatible. Rocker Switch Sizes
SWF Compatible The 444 & 777 Series can be used as direct replacements for the SWF range of switches and accessories. Illumination (when the circuit is activated) and (when dash board lights are on) illumination
More informationCompatible SWF. Illumination. Rocker Switch Sizes
SWF Compatible The 444 & 777 Series can be used as direct replacements for the SWF range of switches and accessories. Illumination (when the circuit is activated) and (when dash board lights are on) illumination
More informationThe L-Series switch range by Carling Technologies, available at Dun-Bri Group...
The L-Series switch range by Carling Technologies, available at Dun-Bri Group... www.dun-bri.com Dun-Bri Group. UK s only specialist and largest supplier of commercial vehicle lighting systems We sold
More informationThermal Overcurrent Circuit Breaker 3130
Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
More informationIP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
More informationThermal Overcurrent Circuit Breaker 3130
Thermal Overcurrent Circuit Breaker 330 Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 60934) of compact design for snap-in panel mounting.
More informationGeneral Specifications
Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationEP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals
More informationDip and coded rotary switches
Dip and coded rotary switches Section P (R) Low profile coted rotary, SMT or through-hole PT (R) oded rotary, through-hole DS/DSR Standard DIP DP/DPL Piano DIP D Right angle DIP IKN Low profile DIP, SMT
More informationTABLE OF CONTENTS. Push Button and Rocker Switches Pag. 4. Signal Lights and Lenses Pag. 14. Pressure Switches Pag. 24
1 TABLE OF CONTENTS Push Button and Rocker Switches Pag. 4 Signal Lights and Lenses Pag. 14 Pressure Switches Pag. 24 2 Push button and Rocker Switches 3 Switches Push button SERIES L4 L4 Bowl L4 Rubber
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More informationMiniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
More informationF Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
More informationSealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range
I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches
More information