Dip and coded rotary switches

Size: px

Start display at page:

Download "Dip and coded rotary switches"

Gwen Cameron
6 years ago
Views:

1 Dip and coded rotary switches Section P (R) Low profile coted rotary, SMT or through-hole PT (R) oded rotary, through-hole DS/DSR Standard DIP DP/DPL Piano DIP D Right angle DIP IKN Low profile DIP, SMT or through-hole IKD DIP, SMT or through-hole IKH Half pitch DIP, SMT, very low profile

2 Selection guide Dip and coded rotary switches Series P (R) PT (R) DS-DSR DP-DPL D IKN IKD IKH Type oded rotary DIP Page Number of positions & & - (except ) - (except ) - (except ) - (even only) - (except ) - (even only) Maximum ratings m VD m VD m VD m VD m VD m VD m VD m VD Process Sealed Yes Yes W. optional tape W. optional tape W. optional tape W. optional tape No W. optional tape Profile off PB Through hole :,mm,mm,mm,mm Through hole:,mm,mm,mm mm SMT:,mm SMT:,mm Mounting options Horizontal SMT X X X X Vertical Through hole X X X X X X X Horizontal Through hole X - PEM

3 R series outside the US and the UK. P series Low profile rotary code switches Surface mount or through-hole actuator types Save board space Highly reliable Solder and flux sealed, washable P SERIES Mounting ctuators odes Terminals (none) S Through-hole Surface mount Screwdriver Spindle Slotted spindle BD BD complement Hexadecimal Hexadec. complement (none) V L Straight or SMT rimped Right angle, spacing, ELETRIL SPEIITIS MEHNIL ND THERML SPES Operating voltage : VD max. ontact load, static : m max. ontact load, dynamic : m max. Initial contact resistance : mω max. Insulation resistance : MΩ min. Torque :, Ncm min. Expected life :. cycles min. Operating temperature : - to + SOLDER REOMMENDTIS MTERILS Base : UL-V, high temperature thermoplastic over : stainless steel ctuator : P. nylon ontacts : gold over nickel plated phosphor bronze Terminals : tin plated PKGING (DIN EI --) Manual soldering : max.for seconds max. Wave soldering : max. for seconds max. Reflow soldering : max. for seconds max.. (.). (.). (.). (.). (.). (.) PS.. pieces per reel (dim. =, mm dim B =, mm). (.). (.). (.) Ø. mini (.DI min). (.). (.). (.) Ø. Maxi (.DI MX) Ø. (.DI). (.) B PS.. PS.. pieces per reel (dim. =, mm dim B =, mm). (.). (.). (.). (.). (.) Ø.±. (. DI±.) Reels : see above. To order a SMT product with tape & reel packaging, add TR at the end of its part number. Tubes : pieces (through-hole or SMT) per tube. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. PEM -

4 P series Low profile rotary code switches Surface mount or through-hole MOUNTING P (none) Through-hole Ø. (.DI). (.). (.). (.). (.). (.). (.). (.) S Surface mount. (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.) TUTORS P Screwdriver. (.). (.). (.) Spindle. (.). (.). (.) Ø. (. DI) Slotted spindle ctuator colour. depending on codes (.) BD red BD compl. orange. Hexadecimal grey (.) Hexadec. compl. white. (.). (.) Ø. (. DI) ODES / TRUTH TBLES P BD Position BD complement Marking Hexadecimal B D E Hexadecimal complement B D E TERMINLS P (none) Straight or SMT V rimped L Right angle, spacing,. (.). (.) Ø. (.DI). (.). (.). (.) Ø. (.DI). (.). (.). (.) - PEM

5 R series, with a blue case, outside the US and the UK. PT series Rotary code switches Through-hole actuator types Save board space Highly reliable Solder and flux sealed, washable PT SERIES ctuators odes Terminals Screwdriver Spindle Segment wheel ccessories BD BD complement Hexadecimal Hexadecimal complement (none) L L Straight Right angle, spacing, Right angle, spacing, (.) ELETRIL SPEIITIS Operating voltage : VD max. ontact load, static : m max. ontact load, dynamic : m max. Initial contact resistance : mω max. Insulation resistance : MΩ min. MTERILS Base : UL-V, high temperature thermoplastic over : UL-V, high temperature thermoplastic, grey ctuator : P. nylon ontacts : gold over nickel plated phosphor bronze Terminals : tin plated PKGING Switches for screwdriver slot or accessory actuation (PT and PT) : tubes of pieces Switches with spindle (PT) or segment wheel (PT) : candy trays of pieces ccessories : bags of pieces MEHNIL ND THERML SPES Torque :, Ncm min. Expected life :. cycles min. Operating temperature : - to + SOLDER REOMMENDTIS (DIN EI --) Manual soldering : max.for seconds max. Wave soldering : max. for seconds max. DIMENSIS Screwdriver slot, straight terminals. (.). (.). (.). (.). (.). (.). (.). (.). (.). (.) Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.. (.) PEM -

6 PT series Rotary code switches Through-hole TUTORS PT Screwdriver Spindle (grey) Segment wheel (grey) ccessories. (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.) See next page ODES / TRUTH TBLES PT BD Position TERMINLS Marking BD complement Hexadecimal Hexadecimal complement B D E B D E PT (none) Straight L Right angle spacing, L Right angle spacing, (.). (.). (.) Ø. (. DI). (.) Ø. (. DI). (.) Ø. (. DI). (.). (.). (.). (.) - PEM

PT series Rotary code switches Through-hole ESSORIES DPTED TO YOUR PPLITIS Basic model PT has been designed to accept different actuators with snap-in connection.

7 PT series Rotary code switches Through-hole ESSORIES DPTED TO YOUR PPLITIS Basic model PT has been designed to accept different actuators with snap-in connection. ccording to your application, you can choose between spindles or plastic knobs in two different lengths and a Ø mm (.) knurled wheel for lateral marking. Standard colours are shown below. Special colours are also available on request. SPINDLES Length, mm (standard) Length, mm P/N U U U OLOURS black grey black. (.). (.). (.). (.). (.) PLSTI KNOBS P/N OLOURS. (.).. (.) (.). (.). (.) Length, mm (standard) Length, mm ( ( Length, mm ( ( ( U U U U U U U red red blue green grey yellow red. (.). (.). (.). (.) Ø. (. DI). (.). (.). (.). (.). (.) Panel. (.). (.) KNURLED WHEEL (unmarked - marking on request) P/N U/ OLOUR white/black.. (.) (.). (.). (.) STNDRD PRODUTS MODELS ODES BD BD complement Hexadecimal Hexadecimal complem. OR SREWDRIVER WITH SPINDLE WITH SEGMENT WHEEL OR ESS. Upper actuation Side actuation Upper actuation Upper actuation Side actuation Upper actuation PT PTL - PT PT PT PTL - - PT - - PT - - PT PTL PTL PT PT PTL - PT PEM -

8 DS-DP-D series DIP switches Distinctive features and specifications Standard, piano and right angle models to positions Top tape sealing option ELETRIL SPEIITIS urrent/voltage rating : - non-switching : m VD - switching : m VD ontact resistance (at m) : mω max. at initial mω after life test Insulation resistance (at VD +/-V) : MΩ min. between adjacent terminals Dielectric strength : VD for one minute apacitance : p between adjacent terminals ircuit : single pole, single throw Electrical life :. cycles min. per switch MTERILS ase, UL-V, glass fiber filled PBT, black over : UL-V,glass fiber filled PBT, red ctuator : UL-V, glass fiber filled PBT, white Terminals/contacts : gold over nickel plated phosphor bronze Terminal seal : epoxy Tape seal : polyester film GENERL SPEIITIS Operating force : DP models : N DS/D models : N Travel : mm (.) Mechanical life :. cycles min. per switch Vibration test : MIL-STD- method Shock test : MIL-STD- method B, conditon Operating temperature : - to + REOMMENDED SOLDERING ND LENING PROESSES Hand soldering : max. for seconds max. ( watt iron max.) Wave soldering : max. for seconds max. orce rinse, high agitation or triple bath cleaning method (with tape seal, option T) : freon T or TE. When vapor methods are used, do not subject switch to solvents above. Note : keep switches in "O" position during soldering and cleaning for best results. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : standard I tubes - Quantities depending on model. See table below. DS/DSR Quantity DS-T/DSR-T Quantity D Quantity D-T Quantity DP/DPL Quantity DP-T/DPL-T Quantity DS(R)- DS(R)- DS(R)- DS(R)- DS(R)- DS(R)- DS(R)- DS(R)- DS(R)- DS(R)- DS(R)-T DS(R)-T DS(R)-T DS(R)-T DS(R)-T DS(R)-T DS(R)-T DS(R)-T DS(R)-T DS(R)-T D- D- D- D- D- D- D- D- D- D- D-T D-T D-T D-T D-T D-T D-T D-T D-T D-T DP(L)- DP(L)- DP(L)- DP(L)- DP(L)- DP(L)- DP(L)- DP(L)- DP(L)-T DP(L)-T DP(L)-T DP(L)-T DP(L)-T DP(L)-T DP(L)-T DP(L)-T - PEM

DS/DSR series Standard DIP switches Raised or recessed actuator to positions MODEL STRUTURE Raised actuator : DS Model No No. Dim "" Dim. "B".. (.) (.) DS-, (.), DS-, (.), (.). (.). (.) DS-, (.), (.) DS-, (.), (.). mini (.

9 DS/DSR series Standard DIP switches Raised or recessed actuator to positions MODEL STRUTURE Raised actuator : DS Model No No. Dim "" Dim. "B".. (.) (.) DS-, (.), DS-, (.), (.). (.). (.) DS-, (.), (.) DS-, (.), (.). mini (. min).. (.) (.) DS-, (.), (.) DS-, (.), (.) DS-, (.), (.) DS-, (.), (.). Maxi (. MX) Ø. (. DI). (.) DS-, (.), (.). (.) DS-, (.), (.) B Top tape sealed : add "T" after model number. Recessed actuator : DSR Model No No. Dim "" Dim. "B" DSR-, (.),. (.) DSR-, (.), (.) DSR-, (.), (.) DSR-, (.), (.) DSR-, (.), (.) DSR-, (.), (.) DSR-, (.), (.) DSR-, (.), (.) DSR-, (.), (.). Maxi. mini (. MX) (. min). (.) Ø. (. DI).. (.) (.). (.) DSR-, (.), (.) B Top tape sealed : add "T" after model number. PEM -

10 DP/DPL series Piano DIP switches Short or long actuator to positions Note : Push down for "" is our standard type. Push down for "O" is also available on special order, consult factory. MODEL STRUTURE Short actuator : DP Model No No. Dim "" Dim. "B" DP-, (.), DP-, (.), (.) DP-, (.), (.) DP-, (.), (.) DP-, (.), (.) DP-, (.), (.) DP-, (.), (.) DP-, (.), (.).. (.) (.). (.). (.) Ø. (. DI).. (.) (.). (.) B Top tape sealed : add "T" after model number. Long actuator : DPL Model No No. Dim "" Dim. "B" DPL-, (.), DPL-, (.), (.) DPL-, (.), (.).. (.) (.). (.). (.). (.). (.) DPL-, (.), (.) DPL-, (.), (.). (.) DPL-, (.), (.) DPL-, (.), (.). (.) Ø. (. DI) DPL-, (.), (.). (.) B Top tape sealed : add "T" after model number. - PEM

11 D series Right angle DIP switches to positions MODEL STRUTURE Raised actuator : D Model No No. Dim "" Dim. "B" D-, (.), D-, (.), (.) D-, (.), (.) D-, (.), (.). (.). (.). (.). (.). (.). (.). (.) D-, (.), (.) D-, (.), (.). (.) D-, (.), (.). (.) ø. (. DI) D-, (.), (.) D-, (.), (.) D-, (.), (.) B Top tape sealed : add "T" after model number. PEM -

12 IKN series DIP switches, surface mount or through-hole Distinctive features Low profile The lowest case available in,, and pole versions Reduction of the shadow effect in IR soldering % reduction of component volume Two versions Surface mount models Designed for reflow soldering UL -V high temperature materials Tin plated terminals Through-hole models Same thermal specifications as SMT models, allowing mixed soldering process Washable by construction Moulded-in terminals Ultrasonic-welded case Two slots on case corners allowing removal of protection tape Reliable contacts nti-crush system on moving contact Bifurcated self-cleaning sliding contacts Positive detent actuation Recessed slide actuators preventing accidental actuation Good visibility of actuators : black slide on clear background Two types of packaging Surface mount models Tape and reel (. pieces per reel) - I tubes Through-hole models I tubes Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. - PEM

13 IKN series Surface mount DIP switches Low profile Overall height from PB :, mm (.) Self-cleaning wiping contacts Recessed actuator with positive detent Tin plated terminals Process compatible - withstand IR reflow soldering (see Technical Information, Surface Mount, end of catalogue) Washable. (.) Tape oplanarity MX. (.) Tape & reel I tubes No Dimension. (.). (.). (.) IKN IKN IKN IKN (.) IKN, (.) IKN, (.) IKN IKN Supplied with all poles in position. Other models (, and positions) : on request, (.). (.) PEM. (.). (.). Maxi (. MX). (.). (.). (.) Pos. PKGING Unrolling direction PEM. (.) Tape dim. L L Reel dim. SPEIITIS Max. current/voltage rating : - switching : m VD - non-switching : m VD ontact resistance : - initial : mω max. - after. cycles : mω max. Insulation resistance :. MΩ min. at VD Dielectric strength : V min. Electrical life :. cycles Travel :, mm (.) Operating temperature : - to + Storage temperature : - to + (.), (.) Ø. Maxi (. DI MX) (.) (.) (.) Ø.±. (. DI±.), (.), (.), (.) Ø. mini (. DI MIN). (.) MTERILS ase and actuator : UL -V thermoplastic Stationary contact : bronze, gold plated over nickel barrier Moving contact : beryllium copper, gold plated Terminals : tin plated over nickel barrier Protection tape : polyimide ntistatic packaging - Standard packaging units : Reels of. pieces Tape meeting international standard IE - Publication - (EI) Start leader : mm min. - End leader : mm I tubes : see next page. PEM -

14 IKN series Through-hole DIP switches Low profile Overall height from PB : mm (.) Self-cleaning wiping contacts Recessed actuator with positive detent Tin plated terminals Wave solderable Washable. (.) Tape Model No No Dimension IKN (.) IKN, (.) IKN, (.). (.). (.). (.). (.). (.). (.). Maxi (. MX) Ø. (. DI) IKN, (.) Supplied with all poles in position. Other models (, and positions) : on request PEM. (.). (.). (.) PKGING SPEIITIS Pos.. (.). (.) Qty/tube. (.) I TUBES PEM PEM PEM Max. current/voltage rating : - switching : m VD - non-switching : m VD ontact resistance : - initial: mω max. - after. cycles : mω max. Insulation resistance :. MΩ min. at VD Dielectric strength : V min. Electrical life :. cycles Travel :, mm (.) Operating temperature : - to + Storage temperature : - to + MTERILS ase and actuator : UL -V thermoplastic Stationary contact : bronze, gold plated over nickel barrier Moving contact : beryllium copper, gold plated Terminals : tin plated over nickel barrier Protection tape : polyimide - PEM

. (.) IKD series Surface mount DIP switches Overall height from PB :, mm Raised actuator Even and odd pole numbers Self-cleaning wiping contacts Gold plated terminals Process compatible - withstand

15 . (.) IKD series Surface mount DIP switches Overall height from PB :, mm Raised actuator Even and odd pole numbers Self-cleaning wiping contacts Gold plated terminals Process compatible - withstand IR reflow soldering (see Technical Information, Surface Mount, end of catalogue) Models with recessed actuator and tape available on request. Tape & reel IKD IKD IKD IKD IKD IKD IKD IKD IKD IKD IKD I tubes IKD IKD IKD IKD IKD IKD IKD IKD IKD IKD IKD No Dimension, (.), (.), (.), (.), (.), (.), (.), (.), (.), (.), (.) Qty/tube. (.). (.). (.). (.). (.). (.). (.).. mini (.) (.MIN). (.). (.). (.). (.) Supplied with all poles in O position. SPEIITIS Max. current/voltage rating : - switching : m VD - non-switching : m VD Initial contact resistance : mω max. Insulation resistance : MΩ min. at VD Dielectric strength : V min. Electrical life :. cycles Travel : mm (.) Operating temperature : - to + Storage temperature : - to + ntistatic packaging - standard packaging units Reels of pieces Tape meeting international standard IE, publication - (EI). I tubes : see above chart for quantities. MTERILS ase and actuator : UL-V thermoplastic Moving contact : phosphor bronze, gold plated, over nickel barrier Terminals : gold plated Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. PEM -

IKD series Through-hole DIP switches Overall height from PB :, mm Raised actuator Even and odd pole numbers Self-cleaning wiping contacts Gold plated terminals Wave solderable Models with recessed

16 IKD series Through-hole DIP switches Overall height from PB :, mm Raised actuator Even and odd pole numbers Self-cleaning wiping contacts Gold plated terminals Wave solderable Models with recessed actuator and tape available on request. Model No IKD IKD IKD IKD IKD IKD IKD IKD IKD IKD IKD No Dimension, (.), (.), (.), (.), (.), (.), (.), (.), (.), (.), (.) Qty/tube.±. (.±.). (.). (.). (.) Ø.±. (.±. DI). (.).. mini (.) (.MIN). (.). (.). (.). (.) Supplied with all poles in O position. SPEIITIS Max. current/voltage rating : - switching : m VD - non-switching : m VD Initial contact resistance : mω max. Insulation resistance : MΩ min. at VD Dielectric strength : V min. Electrical life :. cycles Travel : mm (.) Operating temperature : - to + Storage temperature : - to + ntistatic packaging - standard packaging units I tubes : see above chart for quantities. MTERILS ase and actuator : UL-V thermoplastic Moving contact : phosphor bronze, gold plated, over nickel barrier Terminals : gold plated Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. - PEM

17 IKH series Surface mount half pitch DIP switches Very low profile, mm (.) terminal to terminal pitch Overall height from PB :, mm (.) only Very small PB space requirement Process compatible - withstand IR reflow soldering (see Technical Information, Surface Mount, end of catalogue) Washable (tape seal standard) Tape & reel I tubes (Qty) No Dimension. (.). (.) Tape IKH IKH IKH IKH IKH IKH (), (.) IKH (), (.) IKH (), (.) IKH (), (.) IKH (), (.) Supplied with all poles in position. Switches without tape seal : on request.. (.). (.) PS. (.) PITH.x(P-) (.x(p-)). (.). (.). (.). (.) PS. (.) PITH. (.). (.) TPE ND REEL PKGING Unrolling direction Pos.. (.) Tape dim. L, (.), (.), (.), (.), (.) L Reel dim., (.), (.), (.), (.), (.) SPEIITIS Max. current/voltage rating : - switching : m VD - non switching : m VD Initial contact resistance : mω max. Insulation resistance : MΩ min. at VD Dielectric strength : Vca min. Electrical life :. cycles Travel :, mm (.) Operating temperature : - to + Storage temperature : - to + MTERILS ase and cover : high temperature thermoplastic UL -V, black ctuator : high temperature thermoplastic UL -V, white ontacts : phosphor bronze, gold plated, over nickel barrier Terminals : tin plated Tape seal : polyimide ø. Maxi (. DI MX) Ø. mini (. DI MIN) ntistatic packaging - standard packaging units Reels of. pieces Tape meeting international standard IE - Publication - (EI) I tubes : see above. Ø.±. (. DI±.). (.) Dimensions in mm and inches. PEM -

SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features

SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features Distinctive features ENTIRELY DESIGNED FOR SURFCE MOUNT Surface mount devices (SMD) are subjected to more stringent constraints of temperature, solderability and space savings than through-hole components.