8 x 8 R oller Mill. A. T. Ferrell Company Inc S. Adams St. Bluffton, IN Phone Fax

Transcription

1 8 x 8 R oller Mill A. T. Ferrell Company Inc S. Adams St. Bluffton, IN Phone Fax

2 8 x8 Mill Roll Assembly Item # Part Number Quanity Description Base Frame Weldment Bar Take-Up Bearing Support Take-Up Bearing Modifications Bearing 1-7/16 Bore P.B Roll 8x8Finished (Specify Corrugation) Take-Up Bushing Threaded Insert /8-11 UNC Hex Jam Nut Plated Adjusting Sprocket w/shr Die Spring 13/16 x 1-7/ Sprocker & Adjuster Bushing /8 Diameter Flat Washer Plated Adjusting Sprocket Assembly 13 F #41 Roller Chain Connecting Link 14 F #41 Roller Chain 15 F Ft. #41 Roller Chain Sprocket 50BS /16 Bore Sprocket and Bearing Assembly 18 F #50 Roller Chain Connecting Link 19 F Ft. #50 Roller Chain Spacer-Upper Idler Sprocket Spacer-Lower Idler Sprocket Idler Are Assembly Tension Rod Assembly Die Spring 3/8 x 3/4 x /8 Hex Nuts Angle Assembly Motor Base Motor Mounting Plate Sheave 3/3V 10.6 SK Bushing QD SK V-Belt 3V x Sheave 3/3V 2.65 JA Bushing QDJA Roll Housing 8 x 8 Mill Top Support Hopper Lid 8 x 8 mill Hopper Weldment 8 x 8 mill Chute Front 8 x 8 mill Saddle 8 x 8 Mill Dust Seal 8 x 8 Mill Belt Guard 8 x 8MillChain guard 8x/8 Mill Chain guard 8 x 8 mill Ceramic Steel Mill Magnet /8 Diameter Flat Washer /8-11 UNC x 1-3/4 H.H.C.S /8-11 UNC x 2-1/2 H.H.C.S

3

4 8x8 mill roll assembly (part 2) NOTE: Machinery not shown this sheet for clarity see sheet 1.

5 R OLLER ASSEMBLY ITEM # PART NUMBER QNTY DESCRIPTION Base/frame Weldment-Ultra " Roll-Specify Corrugation " Roll-Specify Corrugation Pillow Block Bearing 1.750" Sprocket, 50BS Bore /2-13UNC x 1.5 Hex HD Cap Screw /2 Diameter Flat Washer Plate /2 Diameter Lock Washer Plate Sheave 3 Groove 3V Bushing, QD SK KW Take-up Bearing Modification Take-up Bushing Threaded Insert /8-11 UNC Hex Jam Nut /8 Diameter Flat Washer Plate Die Spring 13/16 x 1-7/ Sprocket & Adjuster Bushing Adjusting Sprocket Assembly Adjusting Sprocket Spacer Sprocket 41 A /2-13UNC x 2.0 Soclet Hd. Cap Screw 21 F #41 Roller Chain Connecting Link 22 F #41 Roller Chain Offset Conn Link 23 F #41 Roller Chain 3' OLD Bar Take-up Bearing Support Ultra # Sprocket 20 BS15 1-1/ Sprocket & Bearing Assembly Lower Idler Sprocket Spacer Upper Idler Sprocket Spacer 29 F # 50 Roller Chain Connecting Links 30 F #50 Roller Chain (83 Pitches) 31 F #50 Roller Chain Offset Link Idler Arm Assembly Ultra Tension Rod Assembly Die Spring 3/8 x3/4x /8-16 UNC Hex Nut 36 F /2 x1/2 Sch HD Shd. Bolt 3/ /8-11 UNC x 2-1/2 H.H.C.S S/a-11 UNC x 1-3/4 H.H.C.S Motor Mounting Plate Angle Assembly Motor Base Top Support L.H Top Support R.H Roll Housing Ultra Chute Top Back Ultra Chute Bottom Back Ultra # Chute, Frong Ultra 3

6 R OLLER ASSEMBLY ITEM # PART NUMBER QNTY DESCRIPTION Saddle Top Pan Ultra Saddle Bottom Back Ultra Retainer Front Dust Seal Ultra Retainer Front Dust Seal Ultra Retainer Rear Dust Seal Ultra Seal Dust Ultra Seal Dust Ultra Scraper Bar Ultra Roll Adjusting Sprocket Assembly Q.D. Sheave 3 V Sect 3 Grv 2.65 OD (JA) Q.D. Bushing JAS12E x Bore V-Belt 3V x SEE NOTE 1 Motor NOTE: HP 575 Volts 3S18 0/6 TEFC HP 3 Phase 3D18 0/6 TEFC HP 1 Phase 1D18 0/6 TEFC

7

8 Roller Assembly Cont.

9 2 Roll Mill Assembly Item Number Part Number Qnty Description Base Frame Weldment 2 Roll " Roll- Specify Corrugation Bearing Block Front Bearing Mount Weldment Pivot Block & Pin Assembly Pin Front Bearing Mount 7 F Pin-Cotter 3/32 x Adjusting Block /8 11 Hex Jam Nut /8 Flat Washer Spring.813 x 1.438x Sfprocket and Adjuster Bushing Adjusting Sprocket Assembly 14 F Chain Link #41 Spring Lock 15 F Chain Link #41 Offset 16 F Ft. Chain # 41 Roller Riveted Idler Arm assembly Tension Rod Weld Spring.375 x.750 x /8-16 Hex Nut Angle Assembly Motor Base Motor Mounting Plate Sheave 3/3V Bushing QD SIC Bore Sprocket and Bearing Assembly Sprocket, 50 BS Bore Spacer Top Spacer Bottom Top Support (L.H.) Top Support (R.H.) 31 F Ft. Chain # 50 Roller Riveted Lubed Roll Housing Weldment Chute Back 2 Roll Chute Front Saddle 2 Roll 36 1 Motor Mounting Plate 37 1 Sheave 3v Motor V Vbelts 39 1 Bushing QD SK Motor

10 2 Roll Mill Assembly (Part 1)

11 2 Roll Mill Assembly (Part 2)

12 APPENDIX A B OOK VALUE OF COMMON FEED ST UFFS ON AS FED B AS IS Ingredient % Protein % Moisture % Calcium % Phosphorus Corn Corn, High Moisture Oats Barley Wheat Mixed Grain Brewers Grains, Dried Soybeans, Raw Full Fat Soybeans Roasted Soybean Meal, Western Soybean Meal, Lo Protein Soybean Meal, Hi Protein Corn Glutten Feed Corn Glutten Meal Corn Distillers Limestone Molasses, Dried

13 A.T. Ferrell Company Inc. Manufactures of: Mix-Mill 1440 South Adams Street Bluffton, Indiana Phone (260) Fax (260) (800)