MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY

Size: px

Start display at page:

Download "MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY"

Martha Sparks
5 years ago
Views:

1 MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY HARSH INTERNATIONAL, INC. 600 OAK AVE. EATON, COLORDO MAIN NUMBER: (970) FAX: (970) PRICE: $2.50 PARTS BOOK NUMBER:

2 PARTS ORDERING INFORMATION To assure continued safe and efficient operation and to maintain the validity of your warranty use only genuine Harsh replacement parts. To obtain the correct parts for your mixer contact the nearest Harsh equipment dealer in your area. If no Harsh dealer is available, contact Harsh International Inc., 600 Oak Avenue, Eaton, CO 80615, (970) When ordering parts, be sure to know the Model and Serial numbers of the machine. For the quickest service when ordering by phone, be prepared to state the part number and description as well as the Parts Manual part number, the page number and item number of the part(s) you are ordering. Always have repairs performed by qualified Service Personnel from your Harsh dealer. All information, illustrations and specifications contained in this manual are based on the latest product information available at the time of printing. Harsh International, Inc. reserves the right to make changes to manuals, parts or assemblies at any time without prior notice. REPLACEMENT MANUALS Replacement or extra Operator's Manuals and Parts Manuals are available from Harsh or contact your local dealer. All Operator's Manuals and Parts Manuals are ordered by Model number and Serial number of your unit. There is a nominal cost for each manual ordered.!!!! IMPORTANT!!!! Before attempting to operate, inspect, adjust, repair or replace any part of your machine be sure to be thoroughly familiar with your Operator's Manual and observe all safety notices; both printed in the manual and on decals located on the machine. FAILURE TO OBSERVE THESE SAFETY RULES COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE! 2 P age

3 INDEX GROUPS PAGE # SUB FRAME GROUP 900 LOAD CELL (4X4) & PARTS LIST 4 SUB-FRAME GROUP 900 LOAD CELL (6X6) & PART LIST 5 SUB-FRAME GROUP HYDRO HD (900) & PARTS LIST SD HYDROSTATIC DRIVE COMPONENTS & PARTS LIST 7 AUGER GROUP, 900 FEED EZ MIX (1/2 FLT) ASSEMBLY (A8255) 8 AUGER GROUP FEED EZ MIX (1/2 FLT) ASSEMBLY & PARTS LIST 9 AUGER GROUP SD FEED 4 15/16 SHAFTS (A8028) 10 AUGER GROUP SD FEED 4 15/16 SHAFTS PARTS LIST 11 AUGER GROUP 900 SD FEED(3/4 FLT) 4 15/16 SHAFTS 12 AUGER GROUP 900 SD FEED(3/4 FLT) 4 15/16 SHAFTS PARTS LIST 13 AUGER 900 FEED RH DISCHARGE, 16 (A8151) & PARTS LIST 14 AUGER GROUP, 900 FEED EZ NO OUTBOARD 15 AUGER GROUP, 900 FEED EZ NO OUTBOARD PARTS LIST 16 AUGER GROUP, 900 SD RCL SPECIAL (A8393) 17 AUGER GROUP, 900 SD RCL SPECIAL PARTS LIST 18 REAR DRIVE GROUP 900 SD 4 15/16 BEARINGS & PARTS LIST (A8029) 19 REAR DRIVE GROUP 900 SD MIXER (3 15/16) BEARINGS & PARTS LIST (A8026) 20 REAR DRIVE GROUP 900 SD (A8231) 21 REAR DRIVE GROUP 900 SD PARTS LIST 22 DISCHARGE GROUP, TRIPLE SHORT (NEW) (A8262) 23 DISCHARGE GROUP, TRIPLE SHORT (NEW) PARTS LIST 24 DISCHARGE GROUP, TRIPLE MED (NEW) (A8279) 25 DISCHARGE GROUP, TRIPLE MED (NEW) PARTS LIST 26 DISCHARGE GROUP TRIPLE SHORT (33 ) (A7669) 27 DISCHARGE GROUP TRIPLE SHORT (33 ) PARTS LIST 28 DISCHARGE GROUP TRIPLE MED (40 ) (A7709) 29 DISCHARGE GROUP TRIPLE MED (40 ) PARTS LIST 30 DISCHARGE GROUP TRIPLE 9 EXTENDED (48 ) (A7710) 31 DISCHARGE GROUP TRIPLE 9 EXTENDED (48 ) PARTS LIST 32 DISCHARGE GROUP TRIPLE DOUBLE SHORT (33 ) (A8020) 33 DISCHARGE GROUP TRIPLE DOUBLE SHORT (33 ) PARTS LIST 34 RH DISCHARGE GROUP TIRPLE SHORT (33 ) (A8021) 35 RH DISCHARGE GROUP TIRPLE SHORT (33 ) PARTS LIST 36 DOOR GROUP, OIL BATH 900 SD, 1200 (A8034) & PARTS LIST 37 TUB GROUP, 900 SD TRIPLE DISCHARGE (A8030) & PARTS LIST 38 TUB GROUP, 900 SD TRIPLE DISCHARGE (A8105) & PARTS LIST 39 3 P age

4 SUB-FRAME GROUP 900 LOAD CELL (4X4) & PARTS LIST NOTES: BOLT SIDE MOUNT PLATES TO SUB-FRAME MOUNTS FOR LATER ASSEMBLY. QTY ITEM PART # DESCRIPTION QTY ITEM PART # DESCRIPTION 1 1 A18856 SUB FRAME ASSEMBLY, 4 X 4, SCREW, HX HD CAP, 3/ LOAD CELL, HYDRO, 900 UNF X 2 GR WASHER, FLAT, 3/4 SIDE MOUNT PLATE, TRUCK MOUNT, NUT, HEX, 3/4-16 UNF GR5 PEDESTAL ASSEMBLY, 4 7 A8098 (500,700,900) WASHER, LOCK, 3/4 4 P age

5 SUB-FRAME GROUP 900 LOAD CELL (6X6) & PARTS LIST LOAD CELL PED ASSY NOTES: BOLT SIDE MOUNT PLATES TO SUB-FRAME FOR LATER ASSEMBLY. (SEE PARTS KITS A1917) QTY ITEM PART # DESCRIPTION QTY ITEM PART # DESCRIPTION 1 1 A19142 SUB FRAME ASSEMBLY, 6 X SCREW, HX HD CAP, 3/ , LOAD CELL, HYDRO, 9 UNF X 2 GR WASHER, FLAT, 3/4 SIDE MOUNT PLATE, TRUCK MOUNT, NUT, HEX, 3/4-16 UNF GR5 PEDESTAL ASSEMBLY, 4 7 A ,700, WASHER, LOCK, 3/4 5 P age

6 SUB-FRAME GROUP HYDRO HD (900) & PARTS LIST NOTES: ITEMS (1, 2, 3, 4, 5, 6 & 7) ARE ALSO PART OF KIT A1917. BOLT SIDE MOUNT PLATES TO SUB-FRAME MOUNTS FOR LATER ASSEMBLY. QTY ITEM PART # DESCRIPTION QTY ITEM PART # DESCRIPTION 1 1 A21452 SUB FRAME ASSEMBLY, 6 X 6, SCREW, HX HD CAP, 3/ LOAD CELL, HYDRO, 900 UNF X 2 GR5 4 2 A8098 PEDESTAL ASSEMBLY, WASHER, LOCK, 3/ ,700, SIDE MOUNT PLATE, TRUCK NUT, HEX, 3/4-16 UNF GR MOUNT, WASHER, FLAT, 3/4 6 P age

7 900 SD HYDROSTATIC DRIVE COMPONENTS & PARTS LIST NOTES: NO PART NUMBER QTY ITEM PART # DESCRIPTION QTY ITEM PART # DESCRIPTION PLANETARY GEARBOX, SERIES OIL COOLER (DUAL FAN) , 55.9:1, 1200 (OBSOLETE) HYDRAULIC PUMP, #90L130E FAN MOTOR,( ) 2 5 NPN 90L130(FEPTO) FRONT HYDRAULIC PUMP, #90R130 FAN BLADE ( ) 2 6 NPN 90R130(REPTO) REAR HYDROSTATIC DRIVE MOTOR COOLER KIT, HYDAC V110, Replaced by " &104311E" 1 7 A HYDROSTATIC DRIVE MOTOR COOLER FAN & MOTOR, R130 DUAL, SUPREME-A 7 P age

8 AUGER GROUP, 900 FEED EZ MIX (1/2 FLT) ASSEMBLY (A8255) NOTES: LINE ITEM #1 NOT USE TO DETERMINE FLIGHTING TYPE: COMPARE THE FLIGHTING WITH THE THREADS OF A BOLT AND IF THE FLIGHTING IS WRAPPED AROUND THE PIPE EXTENDING AWAY FROM YOU IN A CLOCKWISE DIRECTION THEN IT IS RIGHT HAND (RH) FLIGHTING IF THE FLIGHTING IS WRAPPED AROUND THE PIPE EXTENDING AWAY FROM YOU IN THE COUNTER CLOCKWISE DIRECTION THEN IT IS LEFT HAND (LH) FLIGHTING. BEARINGS: SEE REAR DRIVE NOTES: THESE ARE NOT ACTUAL FLIGHTING ARRANGEMENTS; THESE DRAWINGS ARE FOR ILLUSTRATION ONLY. PLEASE CHECK AUGER TUBE DIAMETER, ORIGINAL FLIGHTING SIZE, AND FLIGHTING ARRANGEMENT BEFORE ORDERING REPLACEMENT FLIGHTING. PLEASE SPECIFY AR OR MILD STEEL. SEE AUGER ORDER FORM. 8 P age

9 AUGER GROUP, 900 FEED EZ MIX (1/2 FLT) ASSEMBLY PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION BEARING, FB SFB1000NE, 3 STUB SHAFT ASSEMBLY, A /16 15/16OD X 8 3/8 LG SCREW, HX HD CAP, 7/8-14 AUGER ASSEMBLY, LOWER RH, 1 12 A21950 UNF X 3 GR5 EZ-MIX, 900 FEED WASHER, LOCK, 7/8 SCREW, HX HD CAP 3/ UNF X 2 1/2 GR NUT, HEX 7/8-14 UNF GR NUT, HEX, 3/4-16 UNF GR5 2 6 A18161 B SHAFT ASSEMBLY, 3 15/16 AUGER ASSEMBLY, LOWER LH, 1 15 A21951 OD X 8 3/8 LG, TAPPED EZ-MIX, 900 FEED STUB SHAFT SPACER, RING AUGER ASSEMBLY, UPPER RH, 1 16 A /16 X 4 1/2 OD, FEED STUB SHAFT SPACER, WASHER 3/8 X 4 1/2 OD, 1 17 A18146 AUGER ASSEMBLY, UPPER LH, 900 FEED WASHER, LOCK, 3/ A18154 STUB SHAFT ASSEMBLY, SCREW, HX HD CAP, 3/4-10 X 1 1/2 GR A /16 OD X 26 7/8 LG STUB SHAFT ASSEMBLY, 3 15/16 OD X 17 1/4 LG 9 P age

10 AUGER GROUP 900 SD FEED 4 15/16 SHAFTS (A8028) NOTES: ITEM NUMBER (8) IS NOT USED USE WITH: 1200 OIL BATH (4 15/16 BEARINGS) W/ NO UPPER BEARING SUPPORT W/ 1200 LOWER BEARING SUPPORT NOTES: ITEM #8 IS NOT USED 10 P age

11 AUGER GROUP 900 SD FEED 4 15/16 SHAFTS PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A18145 AUGER ASSEMBLY, LOWER RH, WASHER, SHAFT SPACER, 4 OD FEED X 3/8 1 2 A18144 AUGER ASSEMBLY, LOWER LH, SCREW, HX HD CAP, 3/4-10 X FEED 1/2 GR5 1 3 A18143 AUGER ASSEMBLY, UPPER RH, STUB SHAFT ASSEMBLY, LOWER, 2 16 A FEED A18146 AUGER ASSEMBLY, UPPER LH, BEARING, FB SFB1000NE, FEED 15/ A20027 STUB SHAFT ASSEMBLY, UPPER WASHER, LOCK, 7/ REAR, 900SD 2 6 A18163 STUB SHAFT ASSEMBLY,3 NUT, HEX 7/8-14 UNF GR /16OD X 8 3/8 LG SCREW, HX HD CAP, 7/8-14 X WASHER, LOCK, 7/ /2 GR SCREW, HX HD CAP 3/4-16 UNF BEARING, 4 15/16 BORE, X 2 1/2 GR5 (ADAMS) NUT, HEX, 3/4-16 UNF GR5 REW, HX HD, 1 1/8-12 X 3 1/ GR8, WASHER, LOCK, 3/4 ADAPTER, , 20 O RING{M} 1 1/4 NPT(M) 2 12 A18161 STUB SHAFT ASSEMBLY, 3 BALL VALVE (PARKER) /16 OD X 8 3/8 LG, TAPPED STUB SHAFT SPACER, 4 1/8 OD BEARING SEAL ASSEMBLY, A20275 X 3/8 LG 15/16 ID, 1200 (OPTIONAL) 11 P age

12 AUGER GROUP 900 SD FEED (3/4 FLT) 4 15/16 SHAFTS (A8170) USE WITH: 1200 OIL BATH (4 15/16 BEARINGS) W/ NO UPPER BEARING SUPPORT W/ 1200 LOWER BEARING SUPPORT NOTES: LINE ITEM NUMBER (8) IS NOT USED 12 P age

13 AUGER GROUP 900 SD FEED (3/4 FLT) 4 15/16 SHAFTS PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A18145 AUGER ASSEMBLY, LOWER RH, WASHER, SHAFT SPACER, 4 OD FEED X A18144 AUGER ASSEMBLY, LOWER LH, SCREW, HX HD CAP, 3/4-10 X FEED 1/2 GR5 1 3 A18143 AUGER ASSEMBLY, UPPER RH, STUB SHAFT ASSEMBLY, LOWER, 2 16 A FEED A18146 AUGER ASSEMBLY, UPPER LH, BEARING, FB SFB1000NE, FEED 15/ A20027 STUB SHAFT ASSEMBLY, SCREW, HX HD CAP, 7/8-14 UNF UPPER REAR, 900SD X 3 GR5 2 6 A18163 STUB SHAFT ASSEMBLY,3 NUT, HEX 7/8-14 UNF GR /16OD X 8 3/8 LG SCREW, HX HD CAP, 7/8-14 X WASHER, LOCK, 7/ /2 GR SCREW, HX HD CAP 3/4-16 BEARING, 4 15/16 BORE, UNF X 2 1/2 GR5 (ADAMS) NUT, HEX, 3/4-16 UNF GR5 SCREW, HX HD, 1 1/8-12 X /2 GR8, WASHER, LOCK, 3/4 ADAPTER, , 20 O RING{M} 1 1/4 NPT(M) STUB SHAFT ASSEMBLY, 3 BALL VALVE (PARKER) 2 12 A /16 OD X 8 3/8 LG, TAPPED STUB SHAFT SPACER, 4 1/8 BEARING SEAL ASSEMBLY, A20275 OD X 3/8 LG 15/16 ID, 1200 (OPTIONAL) 13 P age

14 AUGER GROUP 900 FEED RH DISCHARGE, 16 (A8151) & PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION ~ ~ A8151 AUGER GROUP, RH DISCHARGE, STUB SHAFT SPACER, 4 1/8 OD AUGER, 3 15/16, 900 FEED X 3/8 LG 1 1 A21014 AUGER ASSEMBLY, LOWER RH WASHER, SHAFT SPACER, 4 OD DISCHARGE, 720 FEED X 3/8 1 2 A21015 AUGER ASSEMBLY, LOWER LH SCREW, HX HD CAP, 3/4-10 X DISCHARGE, 720 FEED 1 1/2 GR BEARING, BLOCK, 3 7/16 STUB SHAFT ASSEMBLY, A16416 FLANGE, SPHERICAL 15/16 OD X 17 1/4 LG SCREW, HX HD CAP, 3/4-16 UNF BEARING, FB SFB1000NE, X 3 GR 15/ SCREW, HX HD CAP 3/4-16 UNF X SCREW, HX HD CAP, 7/ /2 GR5 UNF X 3 GR NUT, HEX, 3/4-16 UNF GR NUT, HEX 7/8-14 UNF GR WASHER, LOCK, 3/ WASHER, LOCK, 7/8 2 8 A15590 STUB SHAFT ASSEMBLY, 3 7/16 OD X 7 3/4, TAPPED 14 P age

15 AUGER GROUP, 900 FEED EZ NO OUTBOARD (A8355) NOTES: ITEM # 1 IS NOT USED. 15 P age

16 AUGER GROUP, 900 FEED EZ NO OUTBOARD PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION ~ ~ A8355 AUGER GROUP, 900 FEED EZ STUB SHAFT ASSEMBLY, 3 7/ A15590 OUTBOARD OD X 7 3/4, TAPPED BEARING, FB SFB1000NE, 3 AUGER ASS'Y, LOWER RHT 9-20 ( A /16 5/8 TUBE SCREW, HX HD CAP, 7/8-14 UNF AUGER ASS'Y, LOWER LFT 9-20( A22528 X 3 GR5 5/8 TUBE) WASHER, LOCK, 7/8 AUGER ASSEMBLY, UPPER RH, 1 14 A FEED NUT, HEX 7/8-14 UNF GR5 SCREW, HX HD CAP 3/4-16 UNF X /2 GR5 2 6 A18161 STUB SHAFT ASSEMBLY, 3 15/16 NUT, HEX, 3/4-16 UNF GR OD X 8 3/8 LG, TAPPED STUB SHAFT SPACER, RING 5/16 AUGER ASSEMBLY, UPPER LH, A18146 X 4 1/2 OD, 900 FEED STUB SHAFT SPACER, WASHER STUB SHAFT ASSEMBLY, 3 15/ A /8 X 4 1/2 OD, 900 OD X 20 7/8 LG WASHER, LOCK, 3/4 STUB SHAFT ASSEMBLY, 3 15/ A16416 OD X 17 1/ SCREW, HX HD CAP, 3/4-10 X 1 1/2 GR5 16 P age

17 AUGER GROUP, 900SD RCL SPECIAL (A8393) NOTES: LINE ITEM #1, 2 ARE NOT USED. 17 P age

18 AUGER GROUP, 900SD RCL SPECIAL PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION BEARING, FB SFB1000NE, 3 AUGER ASSY, UPPER LEFT 1 14 A /16 900SD (RCL SPECIAL) BEARING, 4 15/16 BORE, 1200 AUGER ASSY, UPPER RIGHT 1 15 A23354 (ADAMS) 900SD (RCL SPECIAL) 4 5 A18161 STUB SHAFT ASSEMBLY, 3 SCREW, HX HD CAP, 7/ /16 OD X 8 3/8 LG, TAPPED UNF X 3 GR5 2 6 A20068 STUB SHAFT ASSEMBLY, LOWER, WASHER, LOCK, 7/ A20027 STUB SHAFT ASSEMBLY, UPPER NUT, HEX 7/8-14 UNF GR REAR, 900SD STUB SHAFT SPACER, RING 5/16 SCREW, HX HD CAP, 7/8-14 X X 4 1/2 OD, /2 GR STUB SHAFT SPACER, WASHER SCREW,HEX HD 1 1/4"-12X /8 X 4 1/2 OD, 900 GR WASHER, LOCK, 3/4 WASHER, LOCK 1 1/4" PLATED SCREW, HX HD CAP, 3/4-10 X 1 NUT, 1 1/4"- GR8 PLATED /2 GR A23351 AUGER ASSY, LOWER LEFT SCREW, HX HD CAP 3/ SD (RCL SPECIAL) UNF X 2 1/2 GR A23352 AUGER ASSY, LOWER RIGHT NUT, HEX, 3/4-16 UNF GR SD (RCL SPECIAL) 18 P age

19 REAR DRIVE GROUP 900 SD 4 15/16 BEARINGS & PARTS LIST (A8029) NOTES: GOTTSCH USES: 1200 OIL BATH (4 15/16) W/ NO UPPER BEARING SUPPORT W/ NO LOWER BEARING SUPPORT USE WITH: 1200 OIL BATH (4 15/16) W/ NO UPPER BEARING SUPPORT W/ 1200 LOWER BEARING SUPPORT QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION PLANETARY GEARBOX, SERIES ROLLER CHAIN, #160HD X , 33:1, P, INCL CONN & OFFSET OPT PLANETARY GEARBOX, SERIES 400, 58.26:1, 1200 (ADAMS) SPROCKET, #160 CHAIN X 35 TEETH, 3 15/16 BORE, 1 KEY 2 2 A20068 STUB SHAFT ASSEMBLY, LOWER, KEY, SQUARE 1 X 10 1/ , SB-SW 2 3 A20027 STUB SHAFT ASSEMBLY, UPPER ROLLER CHAIN, #160HD X REAR, 900SD, SB 69P, INCL CONN & OFFSET SPROCKET, DS #160 CHAIN X SCREW, HX HD CAP, M14-2 X TEETH, 120MM BORE, 2 KEY 160MM, METRIC (ADAMS) ROLLER CHAIN, #160HD X 76P, SCREW, HX HD CAP 5/8-18 X INCL CONN 1 1/2 GR5 SPROCKET,#160 CHAIN X WASHER, LOCK, 5/ TEETH,4 15/16 BORE W 1 1/4 KEY KEY, SQUARE 1 1/4 X 10 1/ KEY SPACER SPROCKET, #160 CHAIN X 27 TEETH, 4 15/16 BORE W/ KEY 19 P age

20 REAR DRIVE GROUP 900 SD MIXER (3 15/16) BEARINGS (A8026) USE WITH: 1200 OIL BATH (3 15/16 BEARINGS) W/ NO UPPER BEARING SUPPORT W/ 900 LOWER BEARING SUPPORT (A18449) LINE ITEM # 12 & 13 ARE NOT USED. QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION PLANETARY GEARBOX, SERIES SPROCKET, #120 CHAIN X , 33:1, 1200 TEETH, 3 15/16 BORE OPT PLANETARY GEARBOX, SERIES CHAIN, #120 X 94P, INCL TSU 300, 55.9:1, 1200 CONN (TSUBAKI) 2 2 A18154 STUB SHAFT ASSEMBLY, 3 SPROCKET, #120 CHAIN X /16 OD X 26 7/8 LG TEETH, 3 15/16 BORE 2 3 A16416 STUB SHAFT ASSEMBLY, 3 KEY, SQUARE 1 X 5 1/ /16 OD X 17 1/4 L SPROCKET, DS #160 CHAIN X 18 TEETH, 120MM BORE, 2 KEY SCREW, HX HD CAP, M14-2 X 160MM, METRIC (ADAMS) ROLLER CHAIN, #160HD X SCREW, HX HD CAP 5/8-18 X P, INCL CONN 1 1/2 GR SPROCKET, #160 CHAIN X 60 WASHER, LOCK, 5/ TEETH, 3 15/16 BORE KEY, SQUARE 1 X 8 1/ KEY SPACER, 4-B P age

21 REAR DRIVE GROUP 900 SD (A8231) NOTES: INSTALL OIL WIPER ASSEMBLIES BEFORE INSTALLING SPROCKETS. ADJUST OILERS AS NEEDED. 21 P age

22 REAR DRIVE GROUP 900 SD PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A20095 OIL BATH ASSEMBLY, HEAVY DUTY 160 & 240 SPROCKET, 900SD KEY SPACER SPROCKET, #160 CHAIN X 24 ROLLER CHAIN, #160HD X 69P, TEETH, 4 15/16 BORE INCL CONN & OFFSET SPROCKET, #240 CHAIN X 40 ROLLER CHAIN, #160HD X 69P, TEETH, 1 1/4 KEYWAY INCL CONN & OFFSET SPROCKET, #160 CHAIN X 27 TEETH, 4 15/16 BORE W/ KEY EYE BOLT, 3/8-16UNC X 6 LG KEY, SQUARE 1 1/4 X 10 1/ NUT, HEX 3/8-16 UNC GR SPROCKET, #160 CHAIN X 35 TEETH, 3 15/16 BORE, 1 KEY CHAIN LOG, 3/16 GR30, PLATED KEY, SQUARE 1 X 10 1/ EXTENSION SPRING, 1 1/4 X 8 LG, # A21706 TENSIONER ARM ASSEMBLY W/ COMPRESSION FITTING, 1/ GUSSET NPT(F) X 1/4 X A21012 IDLER ARM BAR ASSEMBLY GREASE LINE, UPPER RH, 900SD TENSIONER ARM BAR, 1 X 2 X /2 LG GREASE LINE, LOWER RH, 900SD TENSIONER SPACER BAR, UHMW GREASE LINE, UPPER LH, 900SD TENSIONER ANGLE, UHMW, FORMED GREASE LINE, LOWER LH, 900SD TENSIONER COVER PLATE, LONG, UHMW GREASE FITTING, 1/8 NPT TENSIONER GUIDE, CHAIN #120, OUTBOARD BEARING SUPPORT 1 36 A20107 UMHW ASSEMBLY, LOWER, SCREW, HX HD CAP, 3/8-16 UNC BEARING, FB SFB1000NE, X 2 1/2 GR2 15/ NUT, LOCK HEX 3/8-16 UNC GR ELECTRIC PUMP, 4QT 1 17 A21010 TENSIONER ARM ASSEMBLY, 22 LG WASHER, LOCK, 7/ BEARING, 1 ID, NYLINER NUT, HEX, 7/8-9 UNC GR SET SCREW, COLLAR, 1 ID X GREASE LINE, RH OUTBOARD, /8 OD SD 1 20 A20156 OIL WIPER ASSEMBLY GREASE LINE, LH OUTBOARD, SD 1 21 A18191 OIL WIPER ASSEMBLY W/ LONG IDLER ROLLER, 240 CHAIN END, 7 LG SPROCKET, #240 CHAIN X 12 TEETH, 2 KEYS, 120 APART ROLLER CHAIN, #240 X 49P, INCL CONN & OFFSET 22 P age

23 DISCHARGE GROUP, TRIPLE SHORT (NEW) (A8262) *- MEANS NOT SHOWN NOTES: THESE ITEMS (# 9, 10, 22, 23 & 24) ARE IN PARTS BAG #A7616 ALIGN BOTTOM OF LINKAGE MOUNT PLATE ASSEMBLY (ITEM #39) TO TOP OF DISCHARGE SIDE CENTERED IN SLOTS. 23 P age

24 DISCHARGE GROUP, TRIPLE SHORT (NEW) PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 2 A22387 DROP CHUTE ASSEMBLY, TRIPLE, NEW {without magnets}w/rubbers WASHER, FLAT, 1/4, WROUGHT 1 3 A22384 DROP CHUTE CYLINDER SCREW, HX HD CAP 1/ ASSEMBLY, TRIPLE NEW UNC X A21476 PIN ASSEMBLY, HEIGHT CONTROL DISCHARGE WING, SHIELD PLATE 1 5 A22203 PIN ASSEMBLY, 1 X 2 3/8 LG 16 32* WASHER, FLAT 5/16, USS- PLATED WASHER, FLAT, 3/ * WASHER, LOCK, 5/ HAIR PIN CLIP 16 34* NUT, HEX 5/16-18 UNC GR SCREW, HX HD CAP, 3/8-16 UNC FLAT BAR, 1/4, RUBBER MAT 1 35* X 1 1/4 SUPPORT TRIPLE ONLY WASHER, LOCK, 3/8 4 36* WASHER, LOCK, 1/ NUT, HEX 3/8-16 UNC GR5 4 37* NUT, HEX 1/4-20 UNC GR MAGNET, 8 X 18 1/2 LG 1 38 A21993 DISCHARGE ASSEMBLY, TRIPLE, SHORT, NEW STYLE SCREW, TRUSS HD, 5/16-18 UNC LINKAGE MOUNT PLATE 1 39 A22609 X 3/4 GR2 ASSEMBLY RUBBER MAT, DROP CHUTE DROP CHUTE LINKAGE 1 40 A23189 SPOUT, TRIPLE ASSEMBLY SCREW, CARRIAGE HD, 3/8-16 X SET SCREW, COLLAR, 1 ID X /4 1 5/8 OD FLAT BAR, 1/4, SMALL SUPPORT LINKAGE, DROP CHUTE CYLINDER (SHORT) DISCHARGE HANGER, 5" HIGH PIN ASSEMBLY, 1"DIA. X A23191 DOOR, SHORT 5/8" LG SPACER BAR, 1/4 X 2 1/2 X 11 DROP CHUTE CYLINDER LG. MOUNT (BOLTED) SCREW, CARRIAGE HD, 3/8-16 SCREW, HX HD CAP, 1/ UNC X 1 GR5 UNC X 2 GR SCREW, CARRIAGE HD, 3/8-16 UNC X 1 1/2 GR WASHER, FLAT, 1/ WASHER, FLAT 3/8, USS WASHER, LOCK, 1/ DISCHARGE WING SHIELD C NUT, HEX 1/2-13 UNC GR5 24 P age

25 DISCHARGE GROUP, TRIPLE MED (NEW) (A8279) NOTES: THESE ITEMS # (16, 17, 27, 28 & 29) ARE IN PARTS BAG #7616. ALIGN BOTTOM OF LINKAGE MOUNT PLATE ASSEMBLY (ITEM #32) TO TOP OF DISCHARGE SIDE CENTERED IN SLOTS. ****ITEMS # 3, 10, 24, 25, & 26. (ARE NOT SHOWN IN DRAWING)**** 25 P age

26 DISCHARGE GROUP, TRIPLE MED (NEW) PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A22387 DROP CHUTE ASSEMBLT, TRIPLE SCREW, CARRIAGE HD, 3/ X 1 1/4 1 2 A22384 DROP CHUTE CYLINDER SCREW, TRUSS HD, 5/ ASSEMBLY, NEW UNC X 3/4 GR2 1 4 A22384 DROP CHUTE CYLINDER WASHER, FLAT 5/16, USS ASSEMBLY, NEW PLATED WASHER, FLAT, 3/ WASHER, LOCK, 5/ HAIR PIN CLIP NUT, HEX 5/16-18 UNC GR MAGNET, 8 X 18 1/2 LG SCREW, CARRIAGE HD, 3/ UNC X 1 GR DROP CHUTE SPOUT, RUBBER WASHER, FLAT 3/8, USS MAT, TRIPLE, SHORT DROP CHUTE SPOUT, RUBBER SCREW, CARRIAGE HD, 3/ MAT, TRIPLE, SHORT 16 UNC X 1 1/2 GR FLAT BAR, 1/4, RUBBER MAT DISCHARGE ASSEMBLY, 1 30 A22135 SUPPORT TRIPLE ONLY TRIPLE, MEDIUM, NEW DISCHARGE WING SHIELD 1 31 A22203 PIN ASSEMBLY, 1 X 2 3/8 LG DISCHARGE WING, SHIELD PLATE LINKAGE MOUNT PLATE ASSY 1 32 A23222 MEDIUM DISCHARGE HANGER, 5" HIGH, DROP CHUTE LINKAGE 1 33 A23189 MEDIUM ASSEMBLY SPACER BAR, 1/4 X 2 1/2 X 11 LINKAGE, DROP CHUTE LG CYLINDER (SHORT) ASSY SCREW, HX HD CAP, 3/8-16 UNC COLLAR, SET SCREW 1 ID X X 1 1/4 1 5/8 OD WASHER, LOCK, 3/8 PIN ASSEMBLY, 1" DIA. X A /8" LONG NUT, HEX 3/8-16 UNC GR5 DROP CHUTE CYL. MOUNT (BOLTED) SCREW, HX HD CAP 1/4-20 UNC SCREW, HX HD CAP, 1/ X 1 UNC X 2 GR WASHER, FLAT, 1/4, WROUGHT WASHER, FLAT, 1/ WASHER, LOCK, 1/ WASHER, LOCK, 1/ NUT, HEX 1/4-20 UNC GR NUT, HEX, 1/ P age

27 DISCHARGE GROUP TRIPLE SHORT (33 ) (A7669) NOTES: BOLT ITEM 26 IN PLACE AT ASSEMBLY. CLOSE GAP, MATCH BOLT HOLE. ****ITEM # 10 (A20999) & ITEM # 26 (20935) IS OPTIONAL.**** 27 P age

28 DISCHARGE GROUP TRIPLE SHORT (33 ) PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A17902 DISCHARGE ASSEMBLY, TRIPLE DISCHARGE HANGER, SHORT, W/MOTOR, SHORT, 33" 300'S ONLY 1 2 A17370 CYLINDER ASSEMBLY, DROP CHUTE, SPACER BAR, 1/4 X 2 1/2 X 11 L SCREW, HX HD CAP, 3/8-16 X CYLINDER MOUNT HINGE TUBE, /4 GR5 OD X 2 7/16 LG WASHER, LOCK, 3/ CYLINDER MOUNT BUSHING, 1 1/2 OD X 13/32 LG WASHER, FLAT 3/8, USS CYLINDER MOUNT PIN, 3/4 OD X 2 3/16 LG NUT, HEX 3/8-16 UNC GR HAIR PIN CLIP SCREW, HX HD CAP, 1/2-20 UNF X 3 GR DISCHARGE FILLER, TRIPLE WASHER, FLAT, 1/ SCREW, HX HD CAP, 1/4-20 UNC X 1 GR WASHER, LOCK, 1/ WASHER, FLAT, 1/4, WROUGHT 1 10 A20999 DROP CHUTE ASSEMBLY, TRIPLE, SHORT, WASHER, LOCK, 1/ A17916 DROP CHUTE HINGE ASSEMBLY, TRIPLE, 720, NUT, HEX 1/4-20 UNC GR DISCHARGE STOP STRAP, SHORT 1 24 A7616 DISCHARGE WING PARTS BAG DISCHARGE HANGER, SHORT 1 25 A20847 TENSIONER ARM ASSEMBLY DISCHARGE HANGER, SHORT, 400,500, DISCHARGE WING SHIELD DISCHARGE WING, SHIELD PLATE 28 P age

29 DISCHARGE GROUP TRIPLE MED (40 ) (A7709) NOTES: BOLT ITME 26 IN PLACE AT ASSEMBLY CLOSE GAP, MATCH DRILL BOLT HOLE. **** ITEMS # 10 & 25 ARE OPTIONAL **** 29 P age

30 DISCHARGE GROUP TRIPLE MED (40 ) PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A18168 DISCHARGE ASSEMBLY SPACER BAR, 1/4 X 2 1/2 X W/MOTOR, TRIPLE, MED, 40" LG 1 2 A17370 CYLINDER ASSEMBLY, DROP CYLINDER MOUNT HINGE TUBE, CHUTE, OD X 2 7/16 LG SCREW, HX HD CAP, 3/8-16 X 1 CYLINDER MOUNT BUSHING, /4 GR5 1/2 OD X 13/32 LG WASHER, LOCK, 3/ CYLINDER MOUNT PIN, 3/4 OD X 2 3/16 LG WASHER, FLAT 3/8, USS HAIR PIN CLIP NUT, HEX 3/8-16 UNC GR DISCHARGE FILLER, TRIPLE SCREW, HX HD CAP, 1/2-20 UNF SCREW, HX HD CAP, 1/4-20 UNC X 3 GR5 X 1 GR WASHER, FLAT, 1/ WASHER, FLAT, 1/4, WROUGHT WASHER, LOCK, 1/ WASHER, LOCK, 1/ A20999 DROP CHUTE ASSEMBLY, TRIPLE, SHORT, NUT, HEX 1/4-20 UNC GR A17916 DROP CHUTE HINGE ASSEMBLY, TRIPLE, 720, A7616 DISCHARGE WING PARTS BAG DISCHARGE STOP STRAP, MEDIUM 1 25 A20847 TENSIONER ARM ASSEMBLY DISCHARGE HANGER, SHORT DISCHARGE WING SHIELD DISCHARGE HANGER, SHORT, 400,500, DISCHARGE WING, SHIELD PLATE DISCHARGE HANGER, SHORT, 300'S ONLY 30 P age

31 DISCHARGE GROUP TRIPLE EXTENDED (48 ) (A7710) NOTES: BOLT ITEM 26 IN PLACE AT ASSEMBLY CLOSE GAP. MATCH DRILL BOLT HOLE. ITEM # 10 & 25 ARE OPTIONAL. 31 P age

32 DISCHARGE GROUP TRIPLE EXTENDED (48 ) PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A18169 DISCHARGE ASSEMBLY SPACER BAR, 1/4 X 2 1/2 X W/MOTOR TRIPLE, EXTENDED, LG 48" 1 2 A17370 CYLINDER ASSEMBLY, DROP CYLINDER MOUNT HINGE TUBE, CHUTE, OD X 2 7/16 LG SCREW, HX HD CAP, 3/8-16 X 1 CYLINDER MOUNT BUSHING, /4 GR5 1/2 OD X 13/32 LG WASHER, LOCK, 3/ CYLINDER MOUNT PIN, 3/4 OD X 2 3/16 LG WASHER, FLAT 3/8, USS HAIR PIN CLIP NUT, HEX 3/8-16 UNC GR DISCHARGE FILLER, TRIPLE SCREW, HX HD CAP, 1/2-20 UNF SCREW, HX HD CAP, 1/ X 3 GR5 UNC X 1 GR WASHER, FLAT, 1/ WASHER, FLAT, 1/4, WROUGHT WASHER, LOCK, 1/ WASHER, LOCK, 1/ A20999 DROP CHUTE ASSEMBLY, TRIPLE, SHORT, NUT, HEX 1/4-20 UNC GR A17916 DROP CHUTE HINGE ASSEMBLY, DISCHARGE WING PARTS BAG, 1 24 A8101 TRIPLE, 720,810 EXTENDED DISCHARGE STOP STRAP, EXTENDE 1 25 A20847 TENSIONER ARM ASSEMBLY DISCHARGE HANGER, EXT, 400'S-500'S-700'S DISCHARGE WING SHIELD DISCHARGE HANGER PLATE, DISCHARGE WING, SHIELD EXTENDED, 400,500,700 PLATE DISCHARGE HANGER, EXTENDED, 300 ONLY 32 P age

33 DISCHARGE GROUP TRIPLE DOUBLE SHORT (33 ) (A8020) NOTES: BOLT ITEM 25 IN PLACE AT ASSEMBLY CLOSE GAP. MATCH DRILL BOLT HOLE. ITEM # 10 (A20999) IS OPTIONAL. 33 P age

34 DISCHARGE GROUP TRIPLE DOUBLE SHORT (33 ) PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A20464 DISCHARGE ASSEMBLY, TRIPLE DISCHARGE HANGER, SHORT, DOUBLE, SHORT, 33" 300'S ONLY 2 2 A17370 CYLINDER ASSEMBLY, DROP SPACER BAR, 1/4 X 2 1/2 X CHUTE, LG SCREW, HX HD CAP, 3/8-16 X 1 CYLINDER MOUNT HINGE /4 GR5 TUBE, 1 OD X 2 7/16 LG WASHER, LOCK, 3/ CYLINDER MOUNT BUSHING, 1 1/2 OD X 13/32 LG WASHER, FLAT 3/8, USS CYLINDER MOUNT PIN, 3/4 OD X 2 3/16 LG NUT, HEX 3/8-16 UNC GR HAIR PIN CLIP SCREW, HX HD CAP, 1/2-20 UNF X 3 GR DISCHARGE FILLER, TRIPLE WASHER, FLAT, 1/ SCREW, HX HD CAP, 1/4-20 UNC X 1 GR WASHER, LOCK, 1/ WASHER, FLAT, 1/4, WROUGHT 1 10 A20999 DROP CHUTE ASSEMBLY, TRIPLE, SHORT, WASHER, LOCK, 1/ A19506 DROP CHUTE HINGE ASSEMBLY, TRIPLE, DUAL CYLINDERS NUT, HEX 1/4-20 UNC GR DISCHARGE STOP STRAP, DISCHARGE WING PARTS 1 24 A7616 SHORT BAG DISCHARGE HANGER, SHORT DISCHARGE WING SHIELD DISCHARGE HANGER, SHORT, DISCHARGE WING, SHIELD ,500,700 PLATE 34 P age

35 RH DISCHARGE GROUP TRIPLE SHORT (33 ) (A8021) NOTES: BOLT TEM 25 IN PLACE AT ASSEMBLY CLOSE GAP, MATCH DRILL BOLT HOLE. 35 P age

36 RH DISCHARGE GROUP TRIPLE SHORT (33 ) PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A19864 DISCHARGE ASSEMBLY, RH, SPACER BAR, 1/4 X 2 1/2 X TRIPLE, SHORT, 33" LG 1 2 A17370 CYLINDER ASSEMBLY, DROP CYLINDER MOUNT HINGE TUBE, CHUTE, OD X 2 7/16 LG SCREW, HX HD CAP, 3/8-16 X 1 CYLINDER MOUNT BUSHING, /4 GR5 1/2 OD X 13/32 LG WASHER, LOCK, 3/ CYLINDER MOUNT PIN, 3/4 OD X 2 3/16 LG WASHER, FLAT 3/8, USS HAIR PIN CLIP NUT, HEX 3/8-16 UNC GR DISCHARGE FILLER, TRIPLE SCREW, HX HD CAP, 1/2-20 UNF SCREW, HX HD CAP, 1/4-20 UNC X 3 GR5 X 1 GR WASHER, FLAT, 1/ WASHER, FLAT, 1/4, WROUGHT WASHER, LOCK, 1/ WASHER, LOCK, 1/ A19889 DROP CHUTE ASSEMBLY, RH, TRIPLE NUT, HEX 1/4-20 UNC GR DISCHARGE STOP STRAP, SHORT 1 24 A7616 DISCHARGE WING PARTS BAG DISCHARGE HANGER, SHORT DISCHARGE WING SHIELD DISCHARGE HANGER, SHORT, 300'S ONLY DISCHARGE WING, SHIELD PLATE 36 P age

37 DOOR GROUP, OIL BATH 900SD, 1200 (A8034) NOTES: DOOR PIECE. ITEM # 13 TO BE USED ON TOP, SIDES AND BOTTOM OF DOOR OPENING. START AT THE TOP OPENING IN CENTER AND INSTALL SEAL ALL THE WAY AROUND OPENING. SHOULD BE ONE WELD DOOR MOUNT IN PLACE WHEN DOOR LOCATION IS SET. QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION OIL BATH DOOR, 900SD, NUT, HEX 1/4-20 UNC GR DOOR CHANNEL, RH, 1 X 7 X 57 5/8 LG, FORMED FLEXIBLE DOOR SEAL, 1/ DOOR CHANNEL, LH, 1 X 7 X 57 5/8 SCREW, HX SOCKET FLAT LG, FORMED HD, 1/4-20 X 1 1/ DOOR FRAME PLATE, 10GA X 4 X 53 GAS CHARGED SUPPORT /2 LG, 900SD,1200 LIFT HINGE, BUTT, 4 X SCREW, HX HD CAP, 3/8-16 UNC X 1 1/2 GR HINGE BACK PLATE, 1 1/2 X 4 LG, NUT, LOCK HEX 3/8-16 UNC GR DOOR LATCH EXTENSION WASHER, FLAT 3/8, USS OIL BATH DOOR HANDLE NUT, HEX 3/8-16 UNC GR SCREW, HX HD CAP, 1/4-20 UNC X UPPER STRUT MOUNT PLATE, GR5 1/4 X 7 1/2 X 18 3/8 LG WASHER, FLAT, 1/4, WROUGH STRUT MOUNT BRACE BAR, 1/4 X 1 1/2 X 19 LG WASHER, LOCK, 1/ DOOR STRUT ANGLE, 1 1/2 X 1 1/2 X 20 1/2 LG, P age

38 TUB GROUP, 900 SD TRIPLE DISCHARGE (A8030) & PARTS LIST QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION 1 1 A18029 SIDE ASSEMBLY, RH, PRESSURE BRACE PLATE, 1/4 X 11 X 53 1/2 LG, 720, A18030 SIDE ASSEMBLY, LH, LH TRIPLE, D-RING, 1 1/2 1 3 A18024 FRONT END SHEET ASSEMBLY, LINER, SS, SIDE, 60 X 72 LG, A20095-A OIL BATH ASSEMBLY, 4 15/16 SIDE STIFFENER, 1/4 X 10 X 71 3/ BEARING, DETAIL, 900SD LG, 'S 4 5 A18861 LOAD CELL BRACKET ASSEMBLY, SIDE STIFFENER, 1/4 X 10 X 95 3/ WELDMENT, MM LG, 'S AUGER BOTTOM, 15 1/2 RAD X 72 L LINER, SS, FRONT & REAR END, AUGER BOTTOM, 15 1/2 RAD X 96 LG, A20827 COOLER BRACKET ASSEMBLY 38 P age

39 TUB GROUP, 900 SD TRIPLE DISCHARGE (A8105) & PARTS LIST NOTES: ITEM # 15 AND 16 OPTIONAL FOR HYDROSTATIC DRIVE MIXER ONLY. QTY ITEM # PART # DESCRIPTION QTY ITEM # PART # DESCRIPTION ~ ~ A8105 TUB GROUP, TRIPLE, LH PRESSURE BRACE PLATE, 1/4 X DISCHARGE, 3 15/16, 900SD 11 X 53 1/2 LG, 720, A18029 SIDE ASSEMBLY, RH, D-RING, 1 1/2 1 2 A18030 SIDE ASSEMBLY, LH, LH TRIPLE, LINER, SS, SIDE, 60 X 72 LG, A18024 FRONT END SHEET ASSEMBLY, SIDE STIFFENER, 1/4 X 10 X 71 3/4 LG, 'S 1 4 A20487 OIL BATH ASSEMBLY, 3 15/16 SIDE STIFFENER, 1/4 X 10 X BEARING, 900SD 3/4 LG, 'S 4 5 A18861 LOAD CELL BRACKET ASSEMBLY, LINER, SS, FRONT & REAR END, WELDMENT, MM AUGER BOTTOM, 15 1/2 RAD X 72 COOLER BRACKET ASSEMBLY, 1 15 A19502 LG LH, HYDRO 1 16 A19501 COOLER BRACKET ASSEMBLY, RH, HYDRO 39 P age

MOBILE MIXERS PARTS MANUAL HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS. Serial number up to

MOBILE MIXERS PARTS MANUAL HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS. Serial number up to MOBILE MIXERS PARTS MANUAL 405-470 - 540 HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS Serial number up to Harsh International, Inc. 600 Oak Ave. Eaton, CO 80615-0007 (970) 454-2291 Fax: (970) 454-3491