Quality Parts and Services PARTS CATALOG

Transcription

1 Quality Parts and Services PARTS CATALOG 2017

2 TABLE OF CONTENTS FITTINGS... 1 TUBE FITTINGS... 6 TUBE TO MALE PIPE... 6 TUBE TO FEMALE PIPE... 7 TUBE TO TUBE UNION... 8 TUBE CONNECTORS/ADAPTERS... 9 DUOLOK TO 37 O FLARE (AN) TUBE TO O-RING FACE SEAL TUBE TO SAE CAP AND PLUG COMPONENTS REGULATORS GFI REGULATORS MISC. REGULATORS VALVES, PRDS, & PLUGS CYLINDER VALVES QUARTER TURN/3-WAYS CHECK VALVES PRDs & PLUGS MODULES, SOLENOIDS, & RELAYS PRESSURE SENSORS... 38

3 FILTERS INJECTORS FUELING COMPONENTS RECEPTACLES FUELING NOZZLES BREAKAWAY COUPLINGS ELECTRICAL HARNESSES GAUGES MISC. PARTS... 59

4 FITTINGS Female SAE x Male NPT Adapter (SS-6404) SAE Countersunk plug (SS-6408) Female SAE x Male SAE Adapter (SS-6410) 37 o AN x Female NPT Adapter (SS-2405) Male NPT x Male SAE Adapter (SS-6401) 37 o AN x Male NPT Adapter (SS-2404) Male SAE x Male SAE (SS-6464) 37 o AN x Male SAE Adapter (SS-6400) SAE Plug (SS-6408-HHP) Hex Nipple (SS-5404) 1

5 Hex Coupling Female Pipe Thread (SS-1405) Branch Tee (SS-5604) Pipe Plug (SS-5406) Male Tee (SS-5600) Female Pipe Thread x Male Pipe Thread Adapter (SS-4505) Pipe Cross (SS-5652) Reducing Bushing (SS-5405) Elbow (SS-5504) Pipe Tee (SS-5605) 45 o Elbow (SS-5505) Street Tee (SS-5602) Male Elbow (SS-5500) 2

6 Street Elbow (SS-5502) 45 o Street Elbow (SS-5503) 90 o Male Tube x Male Pipe (SS-2501) 90 o Male Tube x Female Pipe (SS- 2502) Male Tube Union (SS-2403) Reducer & Expander Female Tube x Male Tube (SS-2406) 45 o Male Tube x Male Pipe (SS-2503) 45 o Male Tube (SS-2504) 90 o Male Tube (SS-2500) Tee Male Tube Ends x Male Pipe Center (SS-2601) 3

7 Tee Male Tube Ends x Female Pipe Center (SS-2602) Cross Male Tube (SS-2650) Tee Male Tube (SS-2603) Male Tube x Bulkhead Tube (SS-2700) Tee Male Tube End/Center x Male Pipe End (SS-2605) 90 o Male Tube x Bulkhead Tube (SS-2701) Tee Male Tube End/Center x Female Pipe End (SS-2606) 45 o Male Tube x Bulkhead Tube (SS-2702) 4

8 Tee Male Tube Ends x Bulkhead Tube Center (SS-2703) Tee Male Tube End/Center x Bulkhead Tube End (SS-2704) Bulkhead Tube x Male Pipe (SS-2706) 5

9 TUBE FITTINGS TUBE TO MALE PIPE Male Connector (MC) Bulkhead Male Connector (BMC) Male Elbow - ISO Tapered (MERT) Male Branch Tee (MBT) 45 o Male Elbow (M45E) Male Run Tee (MRT) Male Elbow (ME) 6

10 TUBE FITTINGS TUBE TO FEMALE PIPE Female Connector (FC) Bulkhead Female Connector (BFC) Female Run Tee (FRT) Female Branch Tee (FBT) Female Elbow (FE) 7

11 TUBE FITTINGS TUBE TO TUBE UNION Union (U) Bulkead Union (BU) Bulkhead Reducing Union (BRU) Reducing Union (RU) Union Elbow (UE) Union Cross (UCS) Union Tee (UT) Reducing Union Tee (RUT) Dielectric Adapter (DA) 8

12 TUBE FITTINGS TUBE CONNECTORS/ADAPTERS Bulkhead Reducer/Adapter (BR) Female Adapter (FA) Reducer/Adapter (R) Port Connector (PC) Male Adapter (MA) Reducing Port Connector (RPC) Female Adapter (FA) 9

13 TUBE FITTINGS DUOLOK TO 37 O FLARE (AN) AN Union (ANU) AN Bulkhead Union (ANBU) Female AN Adapter (ANF) AN Adapter (ANA) 10

14 TUBE FITTINGS TUBE TO O-RING FACE SEAL O-Ring Seal Male Connector (OMC) O-Ring Seal Male Striaght Thread Connector (OSC) 11

15 TUBE FITTINGS TUBE TO SAE Male Connector - Straight Thread Boss (MCST) Male Adapter - Straight Thread Boss (MAST) Male Run Tee - Straight Thread Boss (MRTST) Male Branch Tee - Straight Thread Boss (MBTST) Male Elbow - Straight Thread Boss (MEST) 45 o Male Elbow - Straight Thread Boss (M45EST) 12

16 TUBE FITTINGS CAP AND PLUG Cap (C) Plug (P) 13

17 TUBE FITTINGS COMPONENTS Nut (N) Back Ferrule (BF) Ferrule Set (FS) Front Ferrule (FF) Tube Insert (TI) Bulkhead Locknut (BN) 14

18 REGULATORS GFI REGULATORS P Regulator 100 PSI INLET: 3/8 NO SOLENOID PRESSURE TRANSDUCER REPLACES: P90-900, P FORD PN: 2L3Z-9C968-AB P Regulator, 6.5 bar 94 PSI INCLUDES CONNECTOR KIT P INLET: 3/8 PRESSURE TRANSDUCER SOLENOID: 12V P Regulator 110 PSI INCLUDED CONNECTOR KIT P INLET: 3/8 PRESSURE TRANSDUCER SOLENOID: 12V 15

19 P Regulator 145 PSI INLET: 3/8 PRESSURE TRANSDUCER SOLENOID: 12V P Regulator 100 PSI INLET: 1/4 PRESSURE TRANSDUCER NO SOLENOID P Regulator 115 PSI INLET: 3/8 NO PRESSURE TRANSDUCER SOLENOID: 12V 16

20 P Regulator 120 PSI ALL CHRYSLER CNG VEHICLES INLET: 3/8 SOLENOID: 12V NO PRESSURE TRANSDUCER P Regulator, 9 bar 130 PSI INLET: 9/16-18 SAE (#6 ORING) PRESSURE TRANSDUCER SOLENOID: 12V P Regulator 130 PSI INLET 3/8 NO PRESSURE TRANSDUCER SOLENOID: 12V 17

21 P Regulator 150 PSI INLET: 3/8 SOLENOID: 12V NO PRESSURE TRANSDUCER REPLACES: P P Regulator 180 PSI INLET: 3/8 PRESSURE TRANSDUCER SOLENOID: 12V P Regulator, 6.5 bar 95 PSI PRESSURE SENSOR SOLENOID: 12V 18

22 P Regulator, 8.5 bar 125 PSI PRESSURE SENSOR SOLENOID: 12V P3-100A Regulator 120 PSI INLET: 3/8 NO PRESSURE TRANSDUCER SOLENOID: 12V P Regulator, 5.5 bar 80 PSI INLET: 9/16-18 SAE (#6) PRESSURE TRANSDUCER INLET FILTER SOLENOID: 12V INCLUDES CONNECTOR KIT P

23 REGULATORS MISC. REGULATORS HPR3600 High Pressure Regulator, 3600 psi FUEL TYPE: CNG INLET PRESSURE: 3600 PSI OUTLET PRESSURE: 150 ± 20 PSI PRD OUTLET: 400 PSI LENGTH: 5.21 DIAMETER: 2.85 FUEL INLET: 3/8 NPT FUEL OUTLET: 1/4 NPT WATER IN/OUT: 1/4 NPT WATER IN/OUT HOSE BARS: 5/8 OD MTG THREAD: 1-18 HEX, 3/4-16 UNF APPLICATIONS: STATIONARY, MOBILE, INDUSTRIAL, & AUTOMOTIVE ITT130 & ITT150 Regulator ITT Regulator OUTLET PRESSURE OPTIONS: 130 OR 150 PSI 1/4 NPT MALE CAPTURE PIPE PRD INLET: 9/16-18 SAE (#6 ORING) OUTLET: 3/4-16 SAE (#8 ORING) NO THERMOSTAT NO SENSOR PORT 270 PSI PRD (STANDARD) REGULATOR PRD IS NOT SUITABLE AS A STAND ALONE SAFETY RELIEF VALVE OUTLET PRESSURE: 110 PSI 1/4 NPT MALE CAPTURE PIPE PRD INLET: 9/16-18 SAE (#6 ORING) OUTLET: 3/4-16 SAE (#8 ORING) NO THERMOSTAT NO SENSOR PORT 270 PSI PRD (STANDARD) REGULATOR PRD IS NOT SUITABLE AS A STAND ALONE SAFETY RELIEF VALVE 20

24 BLKSTN CNG Regulator, With Pressure Sensor SOLENOID: 12V PRESSURE TRANSDUCER ( PSI) INLET PORT: 9/16-18 SAE (#6 ORING) DUAL OUTLET PORT: 3/4-16 SAE (#8 ORING) THE FITTINGS (OUTLET & INLET) & WIRING HARNESSES ARE SOLD SEPARATELY THE OUTLET PRESSURE SETTING IS FACTORY ADJUSTED TO YOUR SPECIFICATION(S) BLKSTN-NS CNG Regulator, No Pressure Sensor SOLENOID: 12V NO PRESSURE TRANSDUCER INLET PORT: 9/16-18 SAE (#6 ORING) DUAL OUTLET PORT: 3/4-16 SAE (#8 ORING) THE FITTINGS (OUTLET AND INLET) & WIRING HARNESSES ARE SOLD SEPARATELY THE OUTLET PRESSURE SETTING IS FACOTRY ADJUSTED TO YOUR SPECIFICATION(S) EVR110 & EVR135 CNG Regulator 110 OR 135 PSI INLET PORT: 9/16-18 MALE JIC (#6) OUTLET PORT: 1/2-20 SAE (#5 ORING) PRESSURE TRANSDUCER LOCK OFF SOLENOID INCLUDES NEW EXTERNAL PRESSURE RELIEF DEVICE ADDITIONAL FITTINGS OR WIRING HARNESSES SOLD SEPARATEL 21

25 VALVES, PRDS, & PLUGS CYLINDER VALVES 1706X1M Electronic Solenoid Cylinder Valve INCLUDES PRD OPERATING PRESSURE: PSI OPERATING TEMP: -40 o F TO 180 o F VOLTAGE: 12V CONNECTIONS: (2) 9/16-18 SAE (#6 ORING) (THRU PORT) 7/16-20 SAE (#4 ORING) 2-12 UNF 1705X2 Electronic Solenoid Cylinder Valve INCLUDES PRD & PRESSURE SENSOR MAX PRESSURE: 3600 PSI OPERATING TEMP: -40 o F TO 180 o F FORD PN: 2L3Z-9F954-BD CONNECTIONS: (2) 9/16-18 SAE(#6 ORING)(THRU PORT) 7/16-20 SAE (#4 ORING) 2-12 UNF 1731X2 Solenoid Line Valve FUEL: CNG (HYDROGEN ALSO AVALIABLE) OPERATING PRESSURE: PSI FUEL FLOW RATE: CV 1.25 NOMINAL OPERATING TEMP: -40 o F TO 250 o F VOLTAGE: 12V 22

26 1706B CNG Internal Solenoid Valve OPERATING PRESSURE: PSI OPERATING TEMP: -40 o F TO 180 o F CONNECTIONS: 9/16-18 SAE (#6 ORING) (2) 7/16-20 SAE (#4 ORING) 2-12 UNF 1705X14 Internal Solenoid Tank Valve INCLUDES PRD OPERATING PRESSURE: PSI OPERATING TEMP: -40 o F TO 180 o F CONNECTIONS: (2) 9/16-18 SAE (#6 ORING) 7/16-20 SAE (#4 ORING) 2-12 UNF 1705X4 Internal Solenoid Tank Valve OPERATING PRESSURE: 3600 PSI OPERATING TEMP: -40 o F TO 180 o F PORT: 2-12 UNF 23

27 1705X2 Solenoid Tank Valve INCLUDES PRD & SENSOR OPERATING PRESSURE: PSI OPERATING TEMP: -40 o F TO 180 o F CONNECTION: 2-12 UNF P Tool, Internal Solenoid Valve Override APPLICATION: FOR DEFUELING GFI/IMPCO CANADA SOLENOID VALVES T6-300 Heavy Duty Manual Tank Valve MAX WORKING PRESSURE: 7500 PSI SUITABLE FOR USE WITH: HYDROGEN, CNG, COMPRESSED AIR, INERT GAS, OXYGEN, & METHANE CONNECTIONS: INLET/OUTLET: 9/16-18 SAE (#6 ORING) PRD PORT: 5/8-18 UNF 1-1/16-12 UNF 24

28 V Valve, Electronic Cylinder; LYRA INCLUDES HARNESS H INTEGRATED ALLOY PRD APPLICATION: MEDIUM & HEAVY DUTY CONNECTIONS: CYL: 1-1/8-12 UNF LIVE PORT: 9/16-18 SAE (#6 ORING) INLET/OUTLET: 9/16-18 SAE (#6 ORING) PRD: 1/2-20 SAE (#5 ORING)/8MM REFUELING/ENGINE PORT: 7MM V Valve, Electronic Cylinder; VEGA INCLUDES HARNESS H INTEGRATED ALLOY PRD APPLICATION: MEDIUM DUTY CONNECTIONS: CYL: 1-1/8-12 UNF INLET/OUT: 9/16-18 SAE(#6 ORING) PRD: 1/2-20 SAE (#5 ORING)/8MM REFUELING/ENGINE PORT: 7MM LIVE PORT: NOT AVAILABLE V Valve, Electronic Cylinder; ROTAREX APPLICATION: LIGHT DUTY PIGTAIL HARNESS SOLD SEPARATELY UPON REQUEST CONNECTIONS: INLET: 1-1/8-12 UNF OUTLET: 9/16-18 SAE (#6 ORING) PRD: 3/8 MNPT 25

29 V Valve, Electronic Solenoid; EMER MAX PRESSURE: 4500 PSI OPERATING TEMP: -40 o F TO 85 o F SOLENOID: 12V APPLICATION: LIGHT DUTY CONNECTIONS: INLET: 1-1/8-12 UNF OUTLET: 9/16-18 SAE (#6 ORING) PRD: 9/16-18 SAE (#6 ORING) V Valve, Electronic Solenoid; EMER MAX PRESSURE: 4500 PSI OPERATING TEMP: -40 o F TO 85 o F SOLENOID: 12V APPLICATION: MEDIUM & LIGHT DUTY CONNECTIONS: INLET: 3/4-14 NGT OUTLET: 1/4 NPT PRD: 9/16-18 SAE (#6 ORING) V Valve, Manual Cylinder; BETA EUTECTIC ALLOY PRD NO EXCESS FLOW LIMITER AVAILABLE IN HIGH FLOW VERSION MAX PRESSURE: 260 BAR APPLICATION: MEDIUM & HEAVY DUTY CONNECTIONS: CYL: 1-1/8-12 UNF INLET/OUT: 9/16-18 SAE (#6 ORING) PRD: 1/2-20 SAE (#5 ORING)/8MM REFUELING/ENGINE PORT: 7MM LIVE PORT: NOT AVALIABLE 26

30 V Valve, Manual; SHERWOOD APPLICATION: LIGHT, MEDIUM, & HEAVY DUTY CONNECTIONS: OUTLET: 7/16-20 FNPT PRD: UNF CYLINDER: 1-1/8 UNF 27

31 VALVES, PRDS, & PLUGS QUARTER TURN/3-WAYS S Quarter Turn High Pressure Ball Valve 1/4 FNPT 6000 PSIG STAINLESS STEEL S Quarter Turn High Pressure Ball Valve 3/8 COMPRESSION 6000 PSIG STAINLESS STEEL S Quarter Turn High Pressure Ball Valve 1/4 COMPRESSION 6000 PSIG STAINLESS STEEL 28

32 S Way Valve 3/8 COMPRESSION 6000 PSIG STAINLESS STEEL S Way Valve 1/4 MNPT 6000 PSIG STAINLESS STEEL 29

33 VALVES, PRDS, & PLUGS CHECK VALVES S High Pressure Check Valve 3/8 COMPRESSION #1 PSI SPRING, ETHYLENE PROPYLENE 6000 PSIG STAINLESS STEEL S High Pressure Check Valve 3/8 37 DEG JIC (#6 MALE JIC X #6 FEMALE JIC) #1 PSI SPRING, ETHYLENE PROPYLENE 6000 PSIG STAINLESS STEEL S High Pressure Check Valve BOTH CONNECTIONS: 1/4 FNPT #1 PSI SPRING, 6000 PSIG STAINLESS STEEL 30

34 VALVES, PRDS, & PLUGS PRDs & PLUGS P W Pressure Relief Device (PRD), Piston Style IN-LINE APPLICATIONS OPERATING PRESSURE: 3600 PSI FLOW RATE: 50 SCF/MIN ACTIVATION TEMP: 217 o F OR 255 o F CONNECTIONS: 1/2 SAE FLARE UNS-3B V Pressure Relief Device (PRD) CONNECTION: 1/4-18 NPT LENGTH WHEN INSTALLED: 40MM V Pressure Relief Device (PRD) CONNECTION: 9/16-18 SAE (#6 ORING) LENGTH WHEN INSTALLED: 68.9MM 31

35 PRD-4E Pressure Relief Device (PRD), End Plug CYLINDER CONNCETION: 1-1/8-12 UNF VENT PORT: 3/4-16 SAE(#8 ORING)/(11MM) PRD VENT PORT CV: 2.4 GAL/MIN/PSI MAX WORKING PRESSURE: 4500 PSIG VENTING PORT CO-AXIAL TO THE TANK LEAD-FREE FUSIBLE ELEMENT HIGH FLOW CAPACITY L Cylinder End Plug CONNECTION: UNF 32

36 MODULES, SOLENOIDS, & RELAYS EV1000 IDM/Fuel Driver OPERATES INJECTORS AND FEUL GAUGE ONE CONNECTOR HAS 2 WIRES: POWER AND GROUND THE OTHER CONNECTOR IS A 24 PIN CONNECTOR: FUEL GAUGE DRIVER AND INJECTOR DRIVER CIRCUITS EV1001 Fuel Gauge Driver Module ONLY OPERATES FUEL GAUGE ONE CONNECTOR HAS 2 WIRES: POWER AND GROUND THE OTHER CONNECTOR IS A 24 PIN CONNECTOR: FUEL GAUGE IN INSTUMENT CLUSTER B Module, High Resolution 12 PIN CONNCETOR: SERVICES FUEL GAUGE HARNESS MAY BE NEEDED WHEN REPLACING FUEL DRIVER MODULE (HAR-B-107) 33

37 A3-300 Fuse Relay Module CONNECTS TO: MAIN HARNESS POWER FUEL PUMP OR INJECTORS EXTRA RELAY FORD PN: YC3Z-14B239-AA A3-478 Fuse Relay Module CONNECTS TO: MAIN HARNESS POWER FUEL PUMP OR INJECTORS FORD PN: YC3Z-14B239-AA EV3100 Digital Fuel Gauge Kit MORE ACCURATE DIGITAL PSI READER LOCATED IN DASH FOR USE WITH IMPCO SYSTEM ONLY 34

38 A1115PFL236C Fuel Gauge Module Assembly, Freightliner PROGRAMMED FOR FREIGHTLINER APPLICATION INCLUDES: CNG PIGTAIL HARNESS, 8 MODULE CNG CABLE ASSEMBLY PRESSURE SENSOR A111036CNEO Fuel Gauge Module Assembly with Gauge MORE GENERALIZED APPLICATION INCLUDES: CNG PIGTAIL HARNESS, 8 CONTROL CENTER CNG CABLE ASSEMBLY PRESSURE SENSOR GAUGE A1-121 Low Pressure Lock-off Solenoid WORKING PRESSURE: 312 PSI COMPACT DESIGN VOLTAGE: 12V PORTS: 1/4 NPT TEMPREATURE RANGE: -40 o F TO 250 o F OR 170 o FLUID APPLICATION: RATED FOR USE WITH FUEL, AIR, & OTHER MEDIA ENGINEERED FOR USE IN AUTOMOTIVE, INDUSTRIAL, & REFRIDGERATION 35

39 A1-123 Low Pressure Lock-off Solenoid WORKING PRESSURE: 312 PSI VOLTAGE: 12V PORTS: 1/4 NPT TEMPREATURE RANGE: -40 o F TO 250 o F OR 170 o FLUID APPLICATION: RATED FOR USE ON LP GAS, NATURAL GAS, FUEL, AIR, & OTHER FLUIDS ENGINEERED FOR USE IN AUTOMOTIVE, INDUSTRIAL, & REFRIDGERATION A Multi-fuel Lock-off Valve WORKING PRESSURE: 130 PSI 2-WAY NORMALLY CLOSED INLINE SOLENOID VOLTAGE: 12V INLET/OUTLET PORTS: 1/8 FEMALE NPT TEMPREATURE RANGE: -40 o F TO 250 o F OR 170 o FLUID APPLICATION: RATED FOR USE WITH FUEL, AIR, & OTHER MEDIA ENGINEERED FOR USE IN AUTOMOTIVE, INDUSTRIAL, TEMPERATURE, & DISPENSING CONTROL A1-161 Low Pressure Lock-off Valve WORKING PRESSURE: 150 PSI COMPACT DESIGN HIGH FLOW SOLENOID VOLTAGE: 12V PORTS: 1/4 NPT TEMPREATURE RANGE: -40 o F TO 250 o F OR 170 o FLUID APPLICATION: RATED FOR USE WITH FUEL, AIR AND OTHER MEDIA ENGINEERED FOR USE IN AUTOMOTIVE, INDUSTRIAL & REFRIDGERATION 36

40 A1-211B High-Pressure Lock-off Valve RATED UP TO 3600 PSI BUBBLE-TIGHT LEAKAGE DOWN TO 40 PSI ENCAPSULATED COIL OPREATES IN DIRTY OR WET GAS VOLTAGE: 12V PORTS: 9/16-18 SAE (#6 ORING) TEMPREATURE RANGE: -40 o F TO 250 o F APPLICATION: COMPATIVLE WITH A WIDE RANGE OF GASEOUS FUELS ENGINEERED FOR HIGHPRESSURE TANK APPLICATIONS A6-852 Solenoid Coil VOLTAGE: 12V AMP CONNECTION USED ON OMB VALVES & GFI REGULATORS B Solenoid Coil VOLTAGE: 12V REPLACEMENT FOR ROTAREX REGULATOR & TANK VALVE 37

41 PRESSURE SENSORS P1-124P Pressure Sensor PRESSURE RANGE: PSI OPERATING TEMP: -40 o C TO 125 o C CONNECTION: 3/8-24 SAE LENGTH: 2.6 USED ON GFI REGULATORS B Sensor, High Pressure CONNECTION: 1/4 MNPT 3-PIN CONNECTOR M51 B Sensor, Low Pressure CONNECTION: SAE (#4 ORING) 3-PIN CONNECTOR RAIL PRESSURE SENSOR 38

42 FILTERS FLTRA Filter, Coalescent Element LENGTH: 71 MM DIAMETER: 23 MM GOES IN FLTRG FLTRB Filter, Coalescent Element LENGTH: 3 1/8 DIAMETER: 7/8 GRADE 10 MICRON GOES IN FLTRC FLTRC Filter Assembly, High Pressure INLET/OUTLET: 9/16-18 SAE (#6 ORING) LENGTH: 4 3/4 WIDEST DIAMETER: 2 1/4 USES FLTRB ELEMENT 39

43 FLTRF Filter, Coalescent Element LENGTH: 2 3/4 DIAMETER: 7/8 RATED AT.01 MICRON W/ 95% EFFICIENCY GOES IN FLTRH FLTRD Filter, Coalescent Element LENGTH: 2 3/8 DIAMETER: 13/16 FLTRL Filter Element, High Pressure LENGTH: 2 1/2 DIAMETER: 1 1/2 40

44 FLTR113E Filter Element, High Pressure GRADE 6 LENGTH: 5 DIAMETER: 1.5 FLTR36 Filter, Low Pressure LENGTH: 5 1/4 APPLICATION: FORD, ECONOLINE 2 CLAMPS NEEDED FOR EACH FILTER L-0026 A3-546 Filter, Low Pressure INLET/OUTLET: 1/2 FEMALE FLARE LENGTH: 5 GM#

45 A3-514 Filter, LPG INLET/OUTLET: 3/8 DEG MALE JIC LENGTH: 6.11 LEACK TEST: 200 PSI FORD PN: YC3Z-9155-DA BURST PRESSURE: 1800 PSI TSF1 CNG ECE WEH Filter 3600 psi FOR FUELING STATIONS AS PREFILTER 40 MICRON 3600 PSI TSF5 CNG PED WEH Filter 3600 psi FITTING CHOICES: FEMALE THREAD/ MALE THREAD UNF 9/16-18 LH FEMALE THREAD/MALE THREAD UNF 9/16-18 MALE THREAD UNF 9/16-18 ON BOTH SIDES FOR FUELING STATIONS AS PREFILTER (PED) MALE THREAD/FEMALE THREAD DN 8 MM 50 MICRON 3600 PSI 42

46 TGT 8500 Series filter, 5000 psi TGT-A8519C-N.3MA-BS6 LARGE FILTER ASSEMBLY LARGE REPLACEMENT FILTER TGT-284C.3MAN SMALL FILTER ASSEMBLY TGT-A8515C-N.3MA-BS6 SMALL REPLACEMENT FILTER TGT-233C.3MAN TGT-F610 - TGT Grade 10 Coalescing Filter, 5000 psi COALESCING FILTER ASSEMBLY TGT-F610 COALESCING REPLACEMENT FILTER TGT-F610-KIT IMPROVED DESIGN HAS HEX NUT BUILT IN FOR EASY REMOVAL AND MAINTENANCE 43

47 INJECTORS INJ827 Injector, Fuel, NGI-2 BOSCH CNG INJECTOR NGI-2 LENGTH: 80 MM BOSCH PN: OHM 1700 CC, JETRONIC CONNECTOR INJ821 Injector, Fuel, CNG BOSCH CNG INJECTOR NGI OHM LENGTH: 2 (50 MM) BOSCH PN: INJ842 Injector, Fuel, CNG BOSCH CNG INJECTOR NGI-2 JETRONIC CONNECTOR, O-O 34MM LENGTH: 2 BOSCH PN:

48 INJ844 Injector, Fuel, NGI-2 BOSCH CNG INJECTOR NGI-2 LENGTH: 2 BOSCH PN: INJ0959 Injector Set DOUBLE INJECTOR, IN HOUSING APPLICATION: FORD, ECONOLINE INJECTOR SET WITH SENSOR INCLUDED: INJ0960 INJ0980 Injector SINGLE INJECTOR APPLICATION: FORD, ECONOLINE 45

49 N1-361 Injector Sleeve Assembly, Set of 8 INJECTOR ADAPTOR PROPANE FORD PN: YL3Z-9G512-BA R1-202 Low Flow Injector Replacement Kit ALL PARTS NECESSARY FOR REMOVAL & INSTALLATION OF COMPUVALVE LOW FLOW INJECTOR ASSEMBLY NO COOLANT LOCK-OFF FORD PN: 2L3Z-9H529-AA APPLICATIONS: FORD CNG BI-FUEL F FORD LPG BI-FUEL F INCLUDES: LOW FLOW INJECTOR ASSEMBLY ORING, FUEL RAIL SEAL (2) SCREW, #8-32 UNC TIE, CABLE R1-131 LOW FLOW INJECTOR REPLACEMENT KIT KIT INCLUDES ALL HARDWARE NEEDED TO COMPLETE REPLACEMENT OF LOW FLOW INJECTORS INCLUDES: LOW FLOW INJECTOR ASSEMBLY ORING, FUEL REAIL SEAL (2) SCREW, #8-32 UNC TIE, CABLE 46

50 FUELING COMPONENTS RECEPTACLES TN1 CNG NGV1 WEH Receptacle 3600 psi CARS 3600 PSI WITH FEMALE THREAD UNF 9/16-18 TN1 CNG NGV1 WEH Receptacle 3600 psi CARS 3600 PSI 40 MICRON FILTER FITTING CHOICES: WITH TUBE Ø 1/4 WITH TUBE Ø 3/8 WITH TUBE Ø 1/2 TN5 CNG NGV2 WEH Receptacle 3600 psi BUS/TRUCK (ECE) 3600 PSI FITTING CHOICES: WITH TUBE Ø 1/2 WITH TUBE Ø 12 WITH TUBE Ø 16 WITH FEMALE THREAD UNF 7/

51 CAP1 Fill Receptacle Cap STANDARD DUST CAP CAP2 Fill Receptacle Cap, Electronic Dust Cover USED FOR STARTER INTERRUPT REC36P Receptacle, Fuel; 3600 psi CONNECTION: 9/16-18 SAE (#6) LENGTH: 1.6 PRESSURE: 3600 PSI DUST CAP SOLD SEPARATELY 48

52 REC36L Receptacle, Fuel; 3600 psi INCLUDES DUST CAP CONNECTION: 9/16-18 SAE (#6) LENGTH: 2 PRESSURE: 3600 PSI NGV1 RECEPTACLE WITH 3/4 FLATS REC30L Receptacle, Fuel; 3000 psi INCLUDES DUST CAP CONNECTION: 9/16-18 SAE (#6) LENGTH: 2 PRESSURE: 3000 PSI NGV1 RECEPTACLE WITH 3/4 FLATS REC30E Receptacle, Fuel, W/ Bulkhead; 3000 psi INCLUDES DUST CAP CONNECTION: 9/16-18 SAE (#6) LENGTH: 2 5/8 PRESSURE: 3000 PSI NGV1 RECEPTACLE W/ BULKHEAD & FILTER 49

53 REC36D Receptacle, Fuel; 3600 psi INCLUDES DUST CAP LENGTH: 2.56 PRESSURE: 3600 PSI CONNECTION: 9/16-18 SAE (#6) NGV1 RECEPTACLE W/ BULKHEAD RECC36HF Receptacle, Fuel, High Flow; 3600 psi INCLUDES DUST CAP 2-PIECE TN5 RECEPTACLE PRESSURE: 3600 PSI CONNECTION: 1/2 COMPRESSION W/ BULKHEAD LENGTH: 4 1/2 DOES NOT INCLUDE INTEGRATED FILTER REC50CL Receptacle, Fuel, High Flow, Heavy Duty INCLUDES STANDARD DUST CAP CONNECTION: 5/8 COMPRESSION (DOUBLE FERRULE) SERVICE PRESSURE: 3600 PSI MAWP: 5000 PSI WEIGHT: 1.29 LBS LENGTH: 4.8 FOR USE ON EXTREMELY HIGH-FLOW, HEAVY-DUTY APPLICATIONS INCLUDING QUICK-FILL, SELF-SERVICE FUELING OF TRANSIT BUSES & LARGE TRUCKS 50

54 1708X2 Receptacle, CNG Fill Valve CONNECTION: 11/16-16 SAE FOR 3/8 FACE SEAL GM PN: QUANTUM PN: REV. B H2F2S Offlad, Receptacle CONNECTION: 1/4 MNPT 2HF2S Offload, Nozzle CONNECTION: 1/4 MNPT 51

55 FUELING COMPONENTS FUELING NOZZLES TK4 CNG NGV1 WEH Fueling Nozzle, 3600 psi SINGLE HOSE SYSTEM FOR FAST FILLING OF CARS (NGV1) UNF 9/16-18 INTERNAL THREAD (SAE J926) 250 BAR TK 10 CNG NGV1 WEH Fueling Nozzle, 3600 psi FOR FAST FILLING OF CARS (NGV1) 250 BAR GRIP OPTIONS: 45 o 45 o WITH GAS RECIRCULATION 90 o 90 o WITH GAS RECIRCULATION TK16 CNG NGV1 WEH Fueling Nozzle, 3600 psi SELF-SERVICE TWIN HOSE SYSTEM FOR FAST FILLING OF CARS (NGV1) 250 BAR 52

56 TK17 CNG NGV1 WEH Fueling Nozzle, 3600 psi SINGLE-HANDED OPERATION TWIN HOSE SYSTEM FOR FAST FILLING CARS (NGV1) 250 BAR TK22 CNG NGV2 WEH Fueling Nozzle, 3600 psi SINGLE HOSE SYSTEM FOR FAST FILLING OF BUSES AND TRUCKS (NGV2) 250 BAR TK24 CNG NGV2 WEH Fueling Nozzle, 3600 psi EXTERNAL 3-WAY VALVE FOR FAST FILLING BUSES AND TRUCKS (NGV2) SPECIFY WITH OR WITHOUT GAS RECIRCULATION WHEN ORDERING 250 BAR TK26 CNG NGV2 WEH Fueling Nozzle, 3600 psi SELF-SERVICE TWIN HOSE SYSTEM FOR FAST FILLING OF BUSES AND TRUCKS (NGV2) 250 BAR 53

57 FUELING COMPONENTS BREAKAWAY COUPLINGS TGT-6ILB Fill breakaway, 3600 psi DURABLE STAINLESS STEEL AND ALUMINUM CONSTRUCTION MAY BE RECONNECTED MAXIMIZES FLOW FOR ALL NGV1 TYPE 1 AND TYPE 2 NOZZLES 3600 PSI TEMP. RANGE: -40 o C TO 85 o C DISCONNECTION FORCE: 150 LBS TGT-VLB Return Breakaway, 3600 psi DURABLE STAINLESS STEEL AND ALUMINUM CONSTRUCTION MAY BE RECONNECTED MAXIMIZES FLOW FOR ALL NGV1 TYPE 1 AND TYPE 2 NOZZLES 3600 PSI TEMP. RANGE: -40 o C TO 85 o C DISCONNECTION FORCE: 150 LBS 54

58 ELECTRICAL HARNESSES HAR-B-061 Harness, Injector Pigtail LENGTH: 4 1/4 OEM INJECTOR (USCAR CONNECTOR) TO BOSH INJECTOR CONNECTOR USED WITH INJ827 HAR-I-335 Harness, Injector Pigtail LENGTH: 4 3/8 OEM INJECTOR (USCAR CONNECTOR) TO BOSCH INJECTOR CONNECTOR USED WITH INJ827 HAR-I-691 Harness POWER & GROUND SUPPLY USED WITH EV1000 & EV

59 HAR-B-071 Harness, Solenoid Adapter LENGTH: 6 1/4 ADAPTER FOR ROTAREX REGULATOR SOLENOID (BLACK) HAR-I-699 Harness, Injector Pigtail LENGTH: 5 OEM INJECTOR (USCAR CONNECTOR) TO INJECTOR CONNECTOR USED WITH INJ821 & INJ842 H Harness USED WITH OMB VALVES, BLACKSTONE REGULATORS, & MORE APPLICATIONS 56

60 HAR-B-107 Harness, Fuel Gauge USED WITH HIGH RES. MODULE (B ) HAR-D-124 Harness, Pigtail Adaptor FUEL INJECTOR PIGTAIL CENTER SET INDEX EXTERNAL SPRING CLIP RETAINER APPLICATION: LUCAS, BOSC, ROTAREX, DOMESTIC, IMPORT 57

61 GAUGES A1GAUGE1 Gauge, High Pressure; Back Mounted CONNECTION: 1/4 MNPT PRESSURE RANGE: PSI A1GAUGE2 Gauge, High Pressure; Bottom Mounted CONNECTION: 1/4 MNPT PRESSURE RANGE: PSI A1GAUGE3 Gauge, Low Pressure; Back Mounted CONNECTION: 1/4 MNPT PRESSURE RANGE: PSI GR-PRESS-04 Gauge, psi CNG PRESSURE GAUGE PSI WITH WARNING 2-1/16 58

62 MISC. PARTS P A Cylinder Valve Connector MANUAL ELECTRICAL GAS CONNECTOR ON FUEL TANK SOLENOID VALVE FORD PN: F4TZ-9N957-AA Copper Washers Grommets & O-Rings 59

63 B Silicone Cap INTERNAL VENTED VALVE END CAP ID: 30MM LINER/ LINER2 Rubber, Tank Liner, Neoprene LINER: ID: 2.05 OD: THICKNESS: 0.38 LINER2: ID: 2.55 OD: 2.75 THICKNESS: 0.38 LINER 4 Rubber, Tank Liner, Neoprene LINER4: ID: 2.8 OD: 3.13 THICKNESS: 0.52 SOLD BY THE FOOT 60

64 Replacement Labels 61