Compact Modules CKK/CKR 9-70
|
|
- Clemence Brown
- 5 years ago
- Views:
Transcription
1 Compact Modules CKK/CKR 9-70 with Ball Screw Drive and Toothed Belt Drive The Drive & Control Company
2 2 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical Elements Manual Production Systems Transfer Systems
3 R310A 2624 ( ) Compact Modules CKK/CKR CKK/CKR 9-70 Compact Modules Overview of types with load capacities 4 Product overview of motors and controllers 6 Compact Modules with ball screw drive (CKK) 8 Product Overview 8 Structural design 10 Technical data 12 CKK Compact Modules with toothed belt drive (CKR) 18 Product Overview 18 Structural design 20 Technical data 22 CKR Performance data 28 Switch mounting arrangements 30 Overview of switching systems 30 Magnetic fi eld sensor with plug 32 Mounting 34 Mounting, clamping fi xtures, centering ring 34 Connecting shafts for Compact Modules CKR 35 Connection plates for CKK/CKR Connection of Compact Modules via cross-plate 38 Maintenance 39 Lubrication 39 Motors 40 Servo motors 40 Three-phase stepping motors 41 Documentation 42 Inquiry / Order form 43
4 4 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Overview of types with load capacities Type designation (size) Compact Modules are identifi ed by the type designation and size. The type designations are also assigned to the design styles with the same external features but without drive unit. System = Compact Module (C) Guideway = Ball rail system (K) Typ e Size C K K 9-70 Drive unit = Ball screw drive (K) or Toothed belt drive (R) Guideway dimension = ca. (mm) Frame dimension = A Type Guideway Drive unit Compact Module Compact Modules CKK Ball rail system Ball screw drive CKR Ball rail system Toothed belt drive
5 R310A 2624 ( ) Compact Modules CKK/CKR H H1 A CKK A CKR Dynamic load capacity C (N) Compact Module Dimensions A x H (mm) H 1 (mm) L max (mm) Short carriage Long carriage CKK x CKR x Note: All Compact Modules are also available without a drive unit.
6 6 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Product overview of motors and controllers Motor selection based on drive controllers and control system Digital AC servo motor MSK Several motor-controller combinations are available in order to provide the most cost-effective solution for every customer application. When dimensioning the drive unit, always consider the motor-controller combination. For more detailed information on motors and control systems, please refer to the catalogs ECODRIVE Cs and IndraDrive for Linear Motion Systems. Digital AC servo motor MSM Three-phase stepping motor VRDM
7 Hand RS232 Auto R310A 2624 ( ) Compact Modules CKK/CKR Digital controllers IndraDrive Digital controllers ECODRIVE Cs A complete solution Power electronics SD326 SD328 Compact Modules are available as complete solutions with motor, controller unit, and control system. Twin Line Profi Step control unit
8 8 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Modules CKK Product Overview Compact Modules are precision, ready-to-install linear motion systems characterized by their high performance and compact design. Favorable price/performance ratio and fast delivery times. Structural design Extremely compact precision aluminum profi le (frame) with two integrated ball rail systems Precision ball screw drive according to tolerance grade 7 with backlashfree nut system Fixed bearing end block made of aluminum with two-row, preloaded angular-contact thrust ball bearing Floating bearing end block with double ball bearings Short or long carriage made of aluminum with integrated runner blocks Attachments Maintenance-free digital AC servo drives with integrated brake and attached feedback or stepping motors Motor mount and coupling or timing belt side drive for motor attachment Switches Socket with mating plug for the switches Mounting duct made of profi led aluminum Other distinguishing features Economical maintenance thanks to one-point lubrication feature (grease lubrication) of ball rail systems and ball screw drive at both sides Easy motor attachment by means of locating feature and fastening threads Precise alignment and secure fastening of attachments through threads and pin holes and through short or long carriage Internal components protected by rigid aluminum cover and two gap-type seals made of PU strip reinforced with integrated steel cords Adjustable switches over the entire travel range, switch activation without switching cam Two integrated zero-clearance ball rail systems provide optimized travel performance, high load capacities, and high rigidity Exceptionally low profi le due to centrally located ball screw High positioning accuracy and repeatability provided by ball screw drive with zero-backlash nut system High travel speeds with simultaneous high precision over great lengths through ball rail systems, large screw diameters and screw leads, and double fl oating bearings Drive controllers and control systems For mounting and maintenance, see Instructions for Compact Modules CKK R310D4 2671
9 R310A 2624 ( ) Compact Modules CKK/CKR Connection plate for easy installation
10 10 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Module CKK Structural design Structural design CKK 1 Ball screw drive with zero-backlash, cylindrical single nut 2 Floating bearing end block 3 Short carriage with two integrated runner blocks 3a Long carriage with four integrated runner blocks 4 Aluminum cover 5 Gap-type seal made of PU strip (recirculating) 6 Fixed bearing end block 7 Frame a Attachments: 8 Magnetic fi eld sensor 9 Mounting duct 10 Socket/plug 11 Connection plate 3a Motor 13 Motor mount and coupling 14 Timing belt side drive
11 R310A 2624 ( ) Compact Modules CKK/CKR Structural design of motor mount and coupling A motor can be attached to all Compact Modules with ball screw drive by means of a motor mount and coupling. The motor mount serves to fasten the motor to the Compact Module and acts as a closed housing for the coupling. The motor s drive torque is transmitted stress-free through the coupling to the Compact Module s drive shaft. Our standard couplings compensate the system s thermal expansion. If installing third-party couplings, thermal expansion must be considered. 1 Motor 2 Motor mount 3 Coupling 4 Compact Module Structural design of timing belt side drive All Compact Modules offer the option of attaching the motor via a timing belt side drive. This makes the overall length shorter than when attaching the motor with a motor mount and coupling. The compact, closed housing serves as protection for the belt and as a motor bracket. Various gear ratios are also available: i = 1 : 1 i = 1 : 1.5 F pr The timing belt side drive can be installed in four directions: below, above (RV01 and RV02) left, right (RV03 and RV04) 1 Compact Module 2 Drawn, anodized aluminum profi le 3 Toothed belt 4 AC servo motor 5 Pre-tensioning the toothed belt: Apply pretensioning force F pr to motor (F pr is provided upon delivery) 6 Fastening of belt pulleys with tensioning units 7 Cover plate 8 Cover
12 12 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Module CKK Technical data General technical data Size Carriage Ball screw Dynamic load capacity C (N) Dynamic moments Planar moment of inertia y z y Maximum length Moved mass of system m ca (kg) z Connection plate Guideway Ball Fixed M t M L l y l z L max without with d 0 x P screw bearing (Nm) (Nm) (cm 4 ) (cm 4 ) (mm) CKK 9-70 short 8 x long Size Carriage Maximum permissible forces (N) Maximum permissible moments (Nm) Weight with ball screw (kg) F z1 max F z2 max F y max M x max M y max, M z max CKK 9-70 short L long L Acceptable loads (recommended from experience) Modulus of elasticity E With respect to the desired service life, loads up to about 20% of the characteristic dynamic values (C, M t, M L ) have proven to be acceptable. E = 70,000 N/mm 2 At the same time, the following may not be exceeded: maximum permissible loads, permissible drive torque, permissible travel speed. Weight Weight calculation without motor and switches. Weight formula: Weight factor (kg/mm) length L (mm) + weight of all parts of fi xed length (carriage, end blocks, etc.) (kg) Note on dynamic load capacities and moments Determination of the dynamic load capacities and moments is based on a travel life of 100,000 m. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, M t and M L from the table by F y max F z1 max M t /M x max F z2 max F y max M L /M y max M L /M z max M L /M z max Short carriage Long carriage
13 R310A 2624 ( ) Compact Modules CKK/CKR Maximum permissible drive torque for mechanical system M mech The values shown for M mech are applicable under the following conditions: Horizontal operation Ball screw journal without keyway No radial loads on ball screw journal Consider the coupling s rated torque! M mech (Nm) L (mm) Maximum permissible linear speed of mechanical system v mech Consider motor speed! v mech (m/s) L (mm) Specifications of timing belt side drive, floating bearing end for motor attachment via timing belt side drive Motor MSM 030B/MSK 030C Frictional torque M Rsd (Nm) 0.15 Permissible torque up to length L 1) = at Reduced mass moment of inertia at Gear ratio i = i = 1 i = 1.5 i = 1 i = 1.5 Size Ball screw d 0 x P L (mm) M sd (Nm) M sd (Nm) J sd (10 6 kgm 2 ) J sd (10 6 kgm 2 ) CKK x M sd = maximum permissible drive torque of the timing belt side drive (consider the maximum torque of the motor M max ) M Rsd = frictional torque of timing belt side drive at motor journal J sd = Mass moment of inertia of timing belt side drive i = timing belt side drive reduction 1) Permissible torque for greater lengths available upon request Constants k j fix, k j var, k Size Ball Constants Frictional torque M Rs j m Frictional torque M screw k j fix k j var k j m (Nm) Rsd d 0 x P short carriage long carriage short carriage/long carriage CKK x Coupling data Size Motor attachment Rated torque Coupling data Mass moment of inertia Weight For calculation and calculation example, see catalog Compact Modules R310A 2602 (Nm) (10 6 kgm 2 ) (kg) CKK 9-70 MSM 020B MSM 030B MSK 030C VRDM M cn J c m c
14 14 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Module CKK CKK 9-70 Part number, length Type Guideway Drive unit Carriage R ,... mm Without motor mount Screw journal Ball screw size d 0 x P 8 x 2.5 Short carriage (32 mm) Long carriage (73 mm) Connection plate Connection plate without with without with OF01 01 Ø With motor mount MF01 01 Ø With timing belt side drive RV02 RV01 RV03 RV01- RV04 01 Ø RV04 1) Attachment kit also available without motor (when ordering: enter 00 for motor) Order example: see Inquiry / Order form section. Please make sure that the selected combination is a permissible one (load capacities, moments, max. speeds, motor data, etc.)! Switch mounting arrangements A mounting duct is needed to fasten the switches. Switches may be mounted only on one side of the Compact Module (left or right). Refer to Switch mounting arrangements for more information on switch types and switch mounting.
15 R310A 2624 ( ) Compact Modules CKK/CKR Motor attachment Motor Cover Switch Socket, plug Mounting duct Documentation Gear ratio i = Attachment kit 1) for motor Motor type Gap-type seals without with made of PU strip brake brake without with Standard report Measurement report MSK 030C VRDM MSM 030B MSM 020B MSK 030C MSM 030B MSK 030C MSM 030B Without switch Without mounting duct Magnetic field sensor Reed sensor Hall sensor 21 Mounting duct 25 PNP - NC 22 Length = L contact Magnetic field sensor with plug 2) Reed sensor 58 Hall sensor PNP - NC contact Socket Plug Frictional torque 03 Lead deviation 05 Positioning accuracy Calculating the length of the Compact Module (example) L = (stroke + 2 excess travel) + L ca + 30 mm Stroke = Maximum distance from carriage center to the outermost switch activation points. Stroke = 200 mm L ca = 73 mm L = (( ) ) mm In most cases, the recommended limit for excess travel (braking distance) is: Excess travel = 2 screw lead P Example: Ball screw 8 x 2.5 (d 0 x P), Excess travel = = 5 mm
16 16 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Module CKK CKK 9-70 Dimensions All dimensions in mm Drawings not to cale Max. travel / 2 L ca 73 (long carriage) Max. travel / 2 Ø6 h7 Excess travel Effective stroke / 2 L ca 32 (short carriage) Effective stroke / 2 Excess travel L/2 L One-point lubrication on both sides (grease lubrication): Funnel-type lube nipple DIN 3405-D3 Long carriage M3-5 deep (8x) Ø3 H7-5 deep (8x) Lube ports for grease lubrication; ports closed with set screw M OF01 RV01-RV04 D. MF01 F Lsd H E K G L m D L m L f
17 R310A 2624 ( ) Compact Modules CKK/CKR For connection plate, see section on Mounting Ø28 2,5 deep M4-8 deep (4x) B Short carriage 5 Ø3 H7-5 deep (2x) (Frame dimension) A A 45 B For fastening with clamping fi xtures For mounting duct, socket M3-5 deep (4x) Lube ports for grease lubrication; ports closed with set screw M3. Type Motor Dimensions (mm) D E F G H K L f L m L sd i=1 i=1.5 without brake with brake RV01/RV02 MSM 030B RV03/RV04 MSK 030C MF01 MSM 020B MSM 030B MSK 030C VRDM
18 18 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Module CKR Product Overview Compact Modules are precision, ready-to-install linear motion systems offering high performance, compact design, and good price/performance ratio with fast delivery time. Structural design Extremely compact precision aluminum profi le with two integrated ball rail systems for optimal travel performance and movement of heavy loads at high travel speeds Ready-to-install Compact Modules in selectable lengths up to L max Short or long carriage made of aluminum with integrated runner blocks Driven by a pre-tensioned toothed belt Attachments Maintenance-free digital servo drives with integrated brake and attached feedback Gear reducer Reed or Hall sensors Socket with mating plug for the switches Aluminum profi le mounting duct Other distinguishing features Precise alignment and secure fastening of attachments with threads and pin holes and through short or long carriage Idler (non-drive) end enclosure with integrated belt-tensioning system. Pulley ball bearings are lubricated for life Economical maintenance thanks to one-point lubrication feature (grease lubrication) for ball rail systems at sides or through the carriage Easy motor attachment by means of locating feature and fastening threads on drive end enclosure Two integrated zero-clearance ball rail systems provide optimized travel performance, high load capacities, and high rigidity High travel speed with high precision and smooth operation over long lengths Gap-type sealings and side-mounted aluminum rails for guiding the toothed belt Adjustable switches over the entire travel range, switch activation without switching cam
19 R310A 2624 ( ) Compact Modules CKK/CKR Connection plate for easy installation Gear reducer: A variety of gear ratios allow an optimal match between the load and the drive motor inertia.
20 20 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Module CKR Structural design Structural design CKR 1 Toothed belt 2 Drive end enclosure 3 Carriage versions Short carriage with two runner blocks Long carriage with four runner blocks 4 Frame 5 Idler (non-drive) end enclosure Attachments: 6 Magnetic fi eld sensor 7 Mounting duct 8 Socket/plug 9 Motor 10 Gear reducer 11 Connection plate
21 R310A 2624 ( ) Compact Modules CKK/CKR Structural design of gear reducer For all Compact Modules CKR, a planetary gearbox can be installed via a fl ange. The fl ange serves as a mounting point for the gearbox to the Compact Module. This direct connection eliminates the need for a coupling, thereby minimizing torsional defl ection. Several different gear ratios are available: i = 5 i = 10 1 Motor 2 Gear reducer 3 Flange 4 Drive end enclosure 5 Compact Module
22 22 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Module CKR Technical data General technical data Size Carriage Belt type Dynamic load capacity of guideway Dynamic moments Planar moment of inertia y z y Moved mass m B (kg) Connection plate Maximum length Specific spring rate C (N) M t (Nm) M L (Nm) I y (cm 4 ) I z (cm 4 ) without with L max (mm) c spec (N/mm m) CKR 9-70 short AT long AT z Toothed belt stretch ΔL = (F L)/c spec Maximum permissible loads Size Carriage Maximum permissible forces (N) Maximum permissible moments (Nm) F z1 max F z2 max F y max M x max M y max, M z max CKR 9-70 short long Modulus of elasticity E E = 70,000 N/mm 2 Size Carriage Drive type Weight Additional weight of gear reducer (mm) (kg) (kg) CKR 9-70 short Without drive L Drive i = L long Without drive L Drive i = L Weight Weight calculation without motor, switches and sensors. Weight formula: Weight factor (kg/mm) length L (mm) + weight of all parts of fi xed length (carriage, drive and idler end enclosures, etc.) (kg) + additional mass (kg) Note on dynamic load capacities and moments Determination of the dynamic load capacities and moments is based on a travel life of 100,000 m. Often only 50,000 m are actually stipulated. For comparison: Multiply values C, M t and M L from the table by F y max F z1 max M t /M x max F z2 max F y max M L /M y max M L /M z max M L /M z max Long carriage Short carriage
23 R310A 2624 ( ) Compact Modules CKK/CKR Drive data Size Drive type Gear reducer ratio i Max. drive torque 1) M a (Nm) Lead constant u (mm/rev) Belt type Width b (mm) Tooth pitch T (mm) Max. belt drive transmission force F (N) Belt elasticity limit F perm (N) CKR 9-70 i = AT Gear reducer ) Maximum 1,000 cycles/hour Drive data without motor (i = 1) Size Drive unit diameter (mm) Lead constant u (mm/rev) Travel speed v mech (m/s) Belt type CKR up to 3 AT 3 Width 25 mm Reduced mass moment of inertia at motor journal short carriage (kgm 2 ) long carriage (kgm 2 ) Frictional torque data Size Motor Gear unit type i M RS (Nm) M RLP (Nm) CKR 9-70 MSM020B MSK030C Gear reducer 5, For calculation and calculation example, see catalog Compact Modules R310A 2602
24 24 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Modules CKR CKR 9-70 Components and Ordering Part number, length Type Guideway Drive unit Carriage R ,... mm Without drive OA01 Shaft for motor Without keyway i = 1 without 50 Gear reducer i = 5, 10 Short (80 mm) Long (108 mm) Connection plate Connection plate without with without with With drive MA01 right 01 MA02 left MA05 right 06 MA06 left 07 With gear reducer MG 10 MG10 MG10 01 with gear reducer, right 08 With gear reducer MG MG11 MG11 01 with gear reducer, left 09 1) Attachment kit also available without motor (when ordering: enter 00 for motor) 2) Including mounting accessories Note: For gear unit performance data, see Performance data section. CKR with second shaft end In types MA05, MA06, MG10 and MG11 a second drive shaft end can be made available by removing the screws and cover.
25 R310A 2624 ( ) Compact Modules CKK/CKR Motor attachment 1) Motor Switch Socket, plug Mounting duct Documentation Direct drive i = 5 i = 10 without brake with brake Standard report Measurement report Without switch Without mounting duct Magnetic field sensor Frictional torque Reed sensor 21 Mounting duct Hall sensor PNP - NC contact Length = L Magnetic field sensor with plug 2) Socket Plug Positioning accuracy MSK 030C Reed sensor 58 Hall sensor PNP - NC contact MSM 020B Length of the Compact Module L = (stroke + 2 excess travel) + L T + 10 mm Stroke = Maximum distance from carriage center to the outermost switch activation points. Stroke = 400 mm L T = 108 mm L = (( ) ) mm L = 738 mm The excess travel must be greater than the braking distance. You can use acceleration travel s as a recommended value for the braking distance (see Performance data tables). Example CKR 9-70: Horizontal operation with motor MSK 030C, i = 5, m = 2 kg, s = 105 mm Excess travel > 105 mm (110 mm assumed) A mounting duct is needed to fasten the switches. Switches may be mounted only on one side of the Compact Module (left or right). Refer to Switch mounting arrangements for more information on switch types and switch mounting.
26 26 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Modules CKR CKR 9-70 Dimensions All dimensions in mm Drawings not to cale Max. travel / 2 Effective stroke / 2 Max. travel / 2 Effective stroke / Excess travel L ca 108 (long carriage) L ca 80 (short carriage) Excess travel 42 X M3-6 deep (8x) 18 Ø26.5 H7 3 deep Ø3 H7-6 deep (4x) L/2 L Long carriage One-point lubrication on both sides (grease lubrication): Funnel-type lube nipple DIN 3405-D3 M3-6 deep (8x) Ø8 h7 108 Lube ports for grease lubrication; ports closed with set screw M4. OA01 MA01 / MA02 MA05 / MA06 X Ø8 h7 Ø26.5 H Ø 26.5 H H7 Ø10 12 deep Ø8 h7
27 R310A 2624 ( ) Compact Modules CKK/CKR For connection plate, see section on Mounting B L m L f A A 45 B (Frame dimension) Short carriage M3-6 deep (4x) For fastening with clamping fi xtures For mounting duct, socket Lube ports for grease lubrication; ports closed with set screw M4. M3-6 deep (2x) MG10 / MG11 Motor Dimensions (mm) X D L f L m without brake with brake MSM 020B MSK 030C D
28 28 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Compact Modules Performance data CKR 9-70: with long carriage without connection plate with gear reducer for motors with brake in horizontal operation c The data below apply only to the combination described here. For other combinations the performance data must be recalculated. Servomotor MSK 030C and IndraDrive controller 1) Connection voltage: 3 x 400 V Gear reducer ratio i = 5 i = 10 Mass (kg) Acceleration time t (ms) Acceleration distance s (mm) Acceleration a (m/s 2 ) Speed v (m/s) Repeatability (mm) Servomotor MSM 020B and Regler ECODRIVE Cs controller 1) Connection voltage: 1 x 230 V Gear reducer ratio i = 5 i = 10 Mass (kg) Acceleration time t (ms) Acceleration distance s (mm) Acceleration a (m/s 2 ) Speed v (m/s) Repeatability (mm) ) For additional information, refer to the ECODRIVE Cs and IndraDrive for Linear Motion Systems catalogs.
29 R310A 2624 ( ) Compact Modules CKK/CKR Notes
30 30 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Switch mounting arrangements Overview of switching systems Magnetic field sensor Magnetic field sensor with plug The following switch categories can be used with the Compact Module: Magnetic fi eld sensor (Hall and Reed sensors) The entire switching system must be mounted on one side of the Compact Module! Magnetic field sensor Hall and Reed sensor 1 Socket and plug 2 Switch 3 Mounting duct (aluminum alloy, black anodized) 2 c The magnetic field sensors are suitable for travel speeds up to 2 m/s. Short stroke: Take the length of the switch and socket into consideration! Set screw for fi xing in place Active surface Magnetic fi eld sensors with potted cable. Version: Hall sensor (normally closed) or Reed sensor (change-over) Mounting instructions: Switches may be mounted only on one side of the Compact Module (left or right) and only after installing the Compact Module to the mounting base. A mounting duct is needed to fasten the switches. Hall sensor Contact type PNP - NC / NO Reed sensor Contact type Change-over Operating voltage V DC Switching voltage max. 100 V DC Power consumption max. 10 ma Switching current max. 0.5 ma Output current max. 20 ma Cable length 2 m (10 m upon request) Cable length 2 m (10 m upon request) Housing protection class IP 66 Housing protection class IP 66 Maximum travel speed 2 m/s Short-circuit protection No Maximum travel speed 2 m/s Important: 2 switching points! Pin assignment Hall sensor White: VDC Green: Output Reed sensor Brown White Brown: 0 V ground Green
31 R310A 2624 ( ) Compact Modules CKK/CKR Mounting duct Function: To attach and secure magnetic fi eld sensors Cable routing Mounting instructions: The mounting duct is hooked into the T-slots of the module frame and secured with set screws. Set screws are included The switches are slid into the T-slot of the mounting duct and secured with set screws. Socket and plug Attach the socket on the side with the magnetic fi eld sensor The socket and plug have 16 pins. Socket and plug are not wired. This allows optimal assignment of switch positions during start-up. One plug is included. The plug can be installed in three directions. Ø PG pin plug Part numbers of the magnetic field sensors and accessories Item Part numbers 1 Socket-plug R Magnetic field sensor Reed sensor R Hall sensor (PNP - NC) R Mounting duct R
32 32 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Switch mounting arrangements Magnetic fi eld sensor with plug With magnetic fi eld sensors, switch activation is direct (without switching cam). The switch positions can be adjusted freely over the entire travel range. Sensors may be mounted only on one side of the Compact Module (left or right) and only after installing the Compact Module to the mounting base a Switch positions: 1 Limitation at end of stroke (recommendation: Reed or Hall sensor) 2 Reference point in middle of stroke (recommendation: Hall sensor) Sensor mounting assembly consists of: 3 Sensor (Hall or Reed) 4 Sensor mount incl. set screws (loose) and square nut 4a 5 Cable holder (3 units) incl. set screw (loose) 1 5 Version Part number Sensor mounting assembly with Reed sensor R Sensor mounting assembly with Hall sensor R Sensor configuration: Set screw M3 Activation point Sensor mount A sensor mount (1) is required to attach the sensors. It is hooked into the upper slot on the Compact Module and secured with set screws (2). The sensors are pushed into the upper slot of the sensor mount and fi xed with a set screw. The square nut with set screw (3) serves as a positive stop for the sensor (switch position when changing sensors). Parts are included with the sensor mounting assembly
33 R310A 2624 ( ) Compact Modules CKK/CKR Technical data and ordering Hall sensor Part number R Dimension X mm Contact type PNP - NC Operating voltage 3.8 to 30 V DC Power consumption max. 10 ma Output current max. 20 ma Housing protection class IP 66 Short-circuit protection No Permissible travel speed 2 m/s Housing material Ultramid Reed sensor Part number R Dimension X 9 mm Contact type Change-over Switching voltage max. 100 V DC Switching current max. 500 ma Housing protection class IP 66 Permissible travel speed 2 m/s Housing material Ultramid Important: 2 switching points Pin assignment Hall sensor 1: +3.8 to 30 VDC 4: Output Reed sensor 1 4 3: 0 V ground 3 Hall sensor (PNP - NC contact) Reed sensor (change-over) Extension cable for sensor (Reed/Hall) The extension cable (approx. 5 m) is supplied complete with a female connector M8x1 for connection to the sensor ~35 Extension cable Part number Connector contact Protection class R to core brown blue black IP 66 when connected M8x1
34 34 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Mounting Mounting, clamping fi xtures, centering ring Compact Modules are mounted using clamping fi xtures. c Do not secure or support the Compact Module at the end enclosures! The frame is the load-bearing part! When mounting Compact Modules, please note the maximum tightening torques listed in the table. Mounting with clamping fixtures D Recommended number of clamping fi xtures: 3 pieces per 500 mm and side C E F Countersink for thread M 5 (ISO 4762) G Frame size 70 mm Part number Dimensions (mm) Clamping fixtures C D E F G R Tightening torques of fastening screws with friction factor strength class (Nm) max. M5 5.5 Centering ring The centering ring serves as a positioning aid and for positive locking when mounting customer attachments to the carriage. It creates a positive-locking connection with good reproducibility. Material: steel (stainless) D ØF ØC ØA ØB D ØF ØC ØA H 1 Installation ØA H7 a b c ØB H7 ØA H7 H 1 H 2 E Ø Size Dimensions (mm) Part number a) Customer attachment b) Centering ring c) Carriage A B C D E ØF H 1 H 2 (mm) k6 k6 ± R R R R R R R R R R
35 R310A 2624 ( ) Compact Modules CKK/CKR Connecting shafts for Compact Modules CKR Connecting shafts Compensate for misalignments Are backlash-free and torsionally stiff Bridge large distances between axes Can be mounted radially using split clamping hubs (installation and removal without shifting pre-aligned axes) Dynamically balanced Material Bellows: highly fl exible stainless steel Connecting tube and clamping hub: aluminum Screw M Ordering data Please state the part number and length L W. For example: R , L W = 550 mm Size Part number Dimensions (mm) M A (Nm) M S M cs Mass moment of inertia Weight A D M L Wmin L Wmax L W (Nm) (Nm) (10 6 kgm 2 ) (kg) CKR 9-70 R M L M L W (mm) L W (mm) L M = centerline-to-centerline distance between Compact Modules M A = tightening torque of screws M cs = rated torque of connecting shaft M S = peak torque of connecting shaft Torsional stiffness c T Maximum rotary speed n (10 3 Nm/rad) L cs (mm) (min 1 ) L cs (mm) Recommended rotary speed: 80% of maximum rotary speed
36 36 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Mounting Connection plates for CKK/CKR 9-70 Connection plate for CKK Function: Fastening of attachments (with sliding blocks) Lubrication possible from two sides (designed for one-point lubrication through only one of the two sides) Assembly consists of: Connection plate Mounting accessories for fastening to the carriages Sliding blocks are not included with delivery. Short carriage A b) a) Detail A Frame size ± x B Long carriage 4.5 Detail B 70 a) b) a) Funnel-type lube nipple DIN 3405-D4 b) Ø 7 H7, deep Frame size Part number for assembly Short carriage Long carriage 70 R R
37 R310A 2624 ( ) Compact Modules CKK/CKR Connection plate for CKR Function: Fastening of attachments (with sliding blocks) Lubrication possible from two sides (designed for one-point lubrication through only one of the two sides) Assembly consists of: Connection plate Mounting accessories for fastening to the carriages Sliding blocks are not included with delivery. Short carriage A b) a) Detail A Frame size ±0.2 B Long carriage 1x Detail B 70 a) b) a) Funnel-type lube nipple DIN 3405-D4 b) Ø 7 H7, deep Frame size Part number for assembly Short carriage Long carriage 70 R R
38 38 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Mounting Connection of Compact Modules via cross-plate Y-axis connected by the frame (carriage travels) Y-axis connected by the carriage (frame travels) Y-axis Y-axis X-axis X-axis Versions: X-axis Select carriages and long connection plate according to table Components and ordering (option number 41). Y-axis The number of carriages and the connection plate can be freely selected according to table Components and ordering. Versions: Select X-axis and Y-axis with long connection plate according to table Components and ordering (option number 41). Connection kit consisting of: Clamping fi xtures Sliding blocks Screws Centering rings X-axis (Compact Module with connection plate option no. 41) A Y-axis (any carriage version) Frame size R A (mm) 76.5 Weight (kg) R A (mm) 88.0 Weight (kg) 0.20
39 R310A 2624 ( ) Compact Modules CKK/CKR Maintenance Lubrication Lube nipple in frame On each side of the frame of the Compact Modules there are holes through which the lube nipples in the carriage can be accessed. Lubrication from one side only is suffi cient. The lube nipples are not always located centrally in the carriage. Move the carriage as specifi ed in the table. Carriage x (mm) Lube nipples CKK CKR short long 0 0 DIN 3405-D3 Schematic representation Lube ports for carriage attachments The lube ports are sealed with a set screw in the factory before shipment. To use, install according to the specifi ed connection dimensions and use O-rings to seal the interface. a ØE ØD F = = b c M d a) Customer-built attachment b) Carriage c) O-ring d) Frame Compact Carriage Dimensions (mm) O-ring for DIN3771 Module A B ØD ØE F M Part number CKR M 3 3 x 1.0 R CKK short 40 5 CKK long 40 0 Lube nipples in connection plates for CKK/CKR Each connection plate has two funnel type lube nipples (1) according to DIN 3405-D4 located on its end faces. Lubrication through only one of the two lube nipples is suffi cient. 1 Short stroke for CKK/CKR For short-stroke applications (stroke < 40 mm), please consult with us about lubrication.
40 40 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Motors Servo motors AC servo motors MSK Motor data/dimensions Description Symbol Unit MSK030C-0900 Maximum usable speed n max (min 1 ) 9000 Maximum torque M max (Nm) 4 Rated torque M N (Nm) 0.8 Rotor mass moment of J rot (10 6 kgm 2 ) 30 inertia Mass without brake m (kg) 2.1 Holding brake Holding torque M Br (Nm) 1.0 Brake mass moment of J Br (10 6 kgm 2 ) 7 inertia Mass of brake m Br (kg) 0.25 ØE ØD B 1 B 2 B 3 L L 1 H 3 H2 45 A R A ØG ØF H1 Motor Dimensions (mm) A B 1 B 2 B 3 ØD ØE ØF ØG H 1 H 2 H 3 L without L with L 1 R k6 j6 brake brake MSK 030C R5 AC-Servo motors Motor data/dimensions Motor Dimensions (mm) A B 1 B 2 B 3 ØD ØE ØF ØG H 1 H 2 H 3 L without L with h6 h7 brake brake MSM 020B MSM 030B Description Symbol Unit MSM 020B MSM 030B Maximum usable speed n max (min 1 ) Maximum torque M max (Nm) Rated torque M N (Nm) Rotor mass moment of inertia J rot (10 6 kgm 2 ) Mass without brake m (kg) Holding brake Holding torque M Br (Nm) Brake mass moment of inertia J Br (10 6 kgm 2 ) Mass of brake m Br (kg) Notes All servo motors have an absolute multiturn encoder. The motors can be supplied complete with control system. For additional information, refer to the ECODRIVE Cs and IndraDrive for Linear Motion Systems catalogs.
41 R310A 2624 ( ) Compact Modules CKK/CKR Three-phase stepping motors 3hree-phase stepping motors VRDM Notes All VRDM motors are equipped with an encoder for rotation monitoring. VRDM 368 B 1 L ± Ø E Ø D B 2 14 Ø15 Ø51 A Ø G Key to illustration 1 Motor connector 2 Brake 3 Encoder connector 4 Brake connector B Ø F 31 Dimensions Motor Dimensions (mm) A B 1 B 2 B 3 ØD ØE ØF ØG L L without brake with brake VRDM ± Motor data Motor Unit VRDM 368 Maximum permissible torque M max (Nm) 1.50 Motor mass moment of inertia J m (10 6 kgm 2 ) 38 Motor holding torque M m (Nm) 1.74 Mass without brake m m (kg) 1.1 Step count z ( ) 200 / 400 / 500 / 1000 / 2000 / 4000 / 5000 / Stepping angle per step ( ) 1.8 / 0.9 / 0.72 / 0.36 / 0.18 / 0.09 / / Encoder resolution 1000 increments/revolution Holding brake Brake holding torque M br (Nm) 1 Brake mass moment of inertia J br (10 6 kgm 2) 1.6 Mass of brake m br (kg) 0.5 Notes The motors can be supplied complete with control system.
42 42 Compact Modules CKK/CKR 9-70 R310A 2624 ( ) Documentation Standard report Option no. 01 The standard report serves to confi rm that the checks listed in the report have been carried out and that the measured values lie within the permissible tolerances. Frictional torque of complete system Option no. 02 The moment of friction is measured over the entire travel range. M (Nm) Advance Return t (ms) M (Nm) Lead deviation of ball screw drive for Compact Module CKK Option no. 03 A measurement report in table form is provided in addition to the graph (see illustration). Positioning accuracy to VDI/DGQ 3441 Option no. 05 Deviation (μm) Example Measured travel (mm) Measurement points are selected at irregular intervals along the travel range. This allows even periodical deviations to be detected during positioning. Each measurement point is approached several times from both sides. This gives the following parameters: Deviation (mm).... Set position (mm) Positioning accuracy P The positioning accuracy corresponds to the total deviation. It encompasses all the systematic and random deviations during positioning. The positioning accuracy takes the following characteristic values into consideration: position deviation, reversal range, position variation range Position deviation P a The position deviation corresponds to the maximum difference arising in the mean values of all the measurement points. It describes systematic deviations. Reversal range U The reversal range corresponds to the difference in mean values of the two approach directions. The reversal range is determined at every measurement point. It describes systematic deviations. Position variation range P S The position variation range describes the effects of random deviations. It is determined at every measurement point.
43 R310A 2624 ( ) Compact Modules CKK/CKR Inquiry / Order form South Lakes Drive Charlotte, NC Rexroth Compact Modules Phone: (704) / Fax: (704) Order example Order data Explanation Compact Module (part number): R , 738 mm Compact Module CKR 9-70, length = 738 mm Type = MG10 With gear reducer according to illustration MG10 Guideway = 01 Ball Rail System Drive unit = 08 Drive end enclosure for attaching gear reducer at right Carriage = 02 Carriage with length L T = 108 mm Motor attachment = 11 for motor MSK 030C, i = 5 Motor = 85 Motor MSK 030C with brake 1st switch = 21 Reed sensor 2nd switch = 22 Hall sensor, PNP - NC 3rd switch = 21 Reed sensor Mounting duct / cable duct = 25 Mounting duct, delivered as separate part Socket-plug = 17 Socket-plug, delivered as separate part Documentation = 02 Measurement report: Frictional torque To be completed by customer: Inquiry / Order Compact Module (Part number): R, Length mm Type = Guideway = Drive unit = Carriage = Cover (for CKK) = Motor attachment = Motor = 1st switch = 2nd switch = 3rd switch = Mounting duct / cable duct =, mm Socket-plug = Documentation = Individual parts: (Part number): R R R R Quantity Comments: Order of: pcs, per month, per year, per order, or Sender Company: Address: Name: Department: Telephone: Fax:
44 Linear Motion and Assembly Technologies South Lakes Drive Charlotte, NC Telephone (800) Facsimile (704) Corporate Headquarters 5150 Prairie Stone Parkway Hoffman Estates, IL Telephone (847) Facsimile (847) Industrial Hydraulics 2315 City Line Road Bethlehem, PA Telephone (610) Facsimile (610) Electric Drives and Controls 5150 Prairie Stone Parkway Hoffman Estates, IL Telephone (847) Facsimile (847) Pneumatics 1953 Mercer Road Lexington, KY Telephone (859) Facsimile (859) Mobile Hydraulics 1700 Old Mansfield Road Wooster, OH Telephone (330) Facsimile (330) Printed in the United States R310A 2624
Compact Modules CKK/CKR 9-70
Compact Modules CKK/CKR 9-70 (with Ball Rail System, Ball Screw Drive or Toothed Belt Drive) R310EN 2624 (2008.10) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationProduct overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)
10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact
More informationMiniature Linear Modules MKK/MKR The Drive & Control Company
Miniature Linear Modules MKK/MKR 12-40 The Drive & Control Company 2 Miniature Linear Modules R310A 2418 (2009.05) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationPrecision Modules PSK. The Drive & Control Company
Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationProduct Description. Characteristic features R310A 2402 ( ) Linear Modules MLR
9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller
More informationElectromechanical Cylinder EMC
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems
More informationSTAR Ball Rail Tables TKK
before operating X4 X8 X3 X1 X2 S1 S2 12 4 13 5 14 6 15 7 16 8 1 2 3 9 10 11 1 2 3 4 5 6 8.8 S3 X30 Indramat DANGER! AC-CONTROLLER High voltage Danger of electrical shock Do not touch electrical connnections
More informationRexroth Linear Motion Technology
Linear Modules Robotic Erector System for Linear Modules RE 82 402/2003-10 The Drive & Control Company 1 RE 82 402/2003-10 Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard
More informationThe Easiest Way to Build a Custom Handling System
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service The Easiest Way to Build a Custom Handling System camoline the Cartesian Motion building system 2 Rationalizing
More informationcamoline Cartesian Motion Building System R310EN 2605 ( )
camoline Cartesian Motion Building System R310EN 2605 (2009.08) The Drive & Control Company Modularity for best effectiveness Efficient Handling Solutions more than just a system Bosch Rexroth AG 2 Our
More informationBall Screw Assemblies eline. The Drive & Control Company
Ball Screw Assemblies eline The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies eline BSA R310A 3314 (2005.04) Linear Motion Technology Ball Rail Systems Standard
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
More informationBall Screw Assemblies
Ball Screw Assemblies ECO-Line The Drive & Control Company Ball Screw Assemblies Product Overview ECO-Line Ball Screw Assemblies ECO-Line Ball Screws are available from stock as complete assemblies, with
More informationOmega Modules OBB R310EN 2407 ( )N. The Drive & Control Company
Omega Modules OBB R310EN 2407 (2011-09)N The Drive & Control Company The ideal system solution for the ideal application EasyHandling Basic Comfort Advanced Mechanical and pneumatic components, grippers,
More informationTechnical Data and Dimensions EMC
Technical Data Electromechanical Cylinders EMC 5 Technical Data and Dimensions EMC Sizes 3 to 00 follow the standard cylinder series according to ISO 555. Built-in ball screw drives have a diameter of
More informationElectric Mini Slides MSC-EL
Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6
More informationEMC-HD. C 01_2 Subheadline_15pt/7.2mm
C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationR310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
More informationInstructions for Miniature Ball Rail Systems
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Instructions for Miniature Ball Rail Systems The Drive and Control
More informationSlotted nut NMG. Housing nut GWR. Bosch Rexroth AG. for economical constructions. a min. 0,3. M A = tightening torque of slotted nut.
R310EN 3301 (2009.08) Precision Ball Screw Assemblies Bosch Rexroth AG 113 Slotted nut NMG for economical constructions B D d d1 b M A = tightening torque of slotted nut a min. 0,3 Polyamide insert Designation
More informationLINEAR UNITS CT & MT
LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationECODRIVE Cs compact, dynamic and flexible. The Drive & Control Company
ECODRIVE Cs compact, dynamic and flexible The Drive & Control Company 2 ECODRIVE Cs digital servo drives for your automation ECODRIVE Cs is the new, extremely compact generation of drives from Rexroth.
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationMounting Instructions for Ball Rail Systems
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Mounting Instructions for Ball Rail Systems The Drive and Control
More informationElectromechanical Cylinders EMC R310EN 3308 ( )
Electromechanical Cylinders EMC R310EN 3308 (2011-09) Electromechanical Cylinders EMC 3 Electromechanical Cylinders EMC Standards and Safety 4 A Solution to Many Problems 8 Product Overview 10 Structural
More informationProfi le rail guides LLR
Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationLIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm
LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison
More informationPositioning Systems Linear Motor Systems
www.hiwin.de Positioning Systems Linear Motor Systems HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved.
More informationeline Profiled Rail Systems
eline Profiled Rail Systems with Ball and Cam Roller Runner Blocks R310EN 2211 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationIntroduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.
Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely
More informationV SWISS MADE LINEAR TECHNOLOGY
Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections
More informationPrecise, flexible, efficient automation solutions for the semiconductor industry
Precise, flexible, efficient automation solutions for the semiconductor industry 3 Wafer Handling High rigidity, no overshoot, no backlash: Rexroth wafer handling solutions are designed for perfect balance
More information1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
More informationLinear Motion Technology Handbook. The Drive & Control Company
Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE
More informationTORQLIGHT SAFETY COUPLINGS
LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More informationELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
More informationR310EN 2302 ( ) The Drive & Control Company
R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical
More informationCatalogue. Portal Axes PAS
Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationWIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt
WIESEL WHZ80 with roller guideway and AT toothed belt All figures shown in millimeters. Note: Mounted wipers on request. The use of a long power bridge increases the total length. Technical data Linear
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationRunner block FNS R Flanged, normal, standard height
38 Bosch Rexroth Corporation Roller Rail Systems R310A 30 (007.06) Standard Runner Blocks, Steel version Runner block FS R1851... 10 Flanged, normal, standard height Further runner block versions with
More informationC 01_1 Headline_36pt/14.4mm
Compact Modules C 01_1 Headline_36pt/14.4mm Catalog addition: Lubrication / Cover Resist C 01_2 Subheadline_15pt/7.2mm 2 Compact Modules - catalog addition Identification system for short product names
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
More informationMINIATURE METAL BELLOWS COUPLINGS
VRSATIL AND PRCIS. MINIATUR MTAL BLLOWS COUPLINS SRIS MK 0.05 10 Nm TH ULTIMAT COUPLIN FROM 0.05 10 Nm BACKLASH FR MINIATUR BLLOWS COUPLINS MODLS PROPRTIS APPLICATION XAMPLS MK1 with radial set screws
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationBell-house Mounted Arrangement. Highly Flexible K Coupling
Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed
More informationUniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41
Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced
More informationCOMBIBOX. Program Schedule. with an energised to engage single sided clutch without brake... COMBIBOX 09
COMBIBOX clutch-brake-combination 10 / 09 / 06 with an energised to engage single sided clutch / brake... COMBIBOX 10 with an energised to engage single sided clutch without brake... COMBIBOX 09 with an
More informationProduct Information ECN 425 EQN 437. Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications
Product Information ECN 425 EQN 437 Absolute Rotary Encoders with Hollow Shaft and Expanding Ring Coupling for Safety-Related Applications 4/2014 ECN 425, EQN 437 Rotary encoders for absolute position
More informationPrecision in motion. Linear motion solutions from Bosch Rexroth.
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Precision in motion. Linear motion solutions from Bosch Rexroth.
More informationAccessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
More informationEJP SERIES Right-angle Worm
EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals
More informationPNCE ELECTRIC CYLINDER
ELECTRIC CYLINDER INDEX Characteristics 1 Structural design 2 How to order 3 Technical data 4 Dimensions 11 Accessories 12 Lubrication position 2 Motor adapter with coupling 2 Motor side drive with timing
More informationPNCE ELECTRIC CYLINDERS
ELECTRIC CYLINDERS Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More informationSix keys to achieving better precision in linear motion control applications
profile Drive & Control Six keys to achieving better precision in linear motion control applications Achieving precise linear motion Consider these factors when specifying linear motion systems: Equipped
More informationPRECISION BELLOWS COUPLINGS
PRECISION BELLOWS COUPLINGS Bellows couplings are used where precise rotation, high speeds, and dynamic motion must be transmitted. They exhibit zero backlash and a high level of torsional stiffness, offering
More informationDKR Intelligent Digital AC Vector Drives 35 to 330 hp (26 to 245 kw)
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation DKR Intelligent Digital AC Vector Drives 35 to 330 hp (26 to 245 kw) The Drive &
More informationNEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure
NEW LM Actuator Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure TY US Only CATALOG No.352E Structure of Model TY This belt drive
More informationTandler. Hypoid. Servo Gearheads
Tandler Hypoid Servo Gearheads ServoFoxx Hypoid Gearboxes The new Hypoid gearbox from Tandler offers the ultimate in performance and connection versatility for dynamic servo driven applications. Benefits:
More informationMINIATURE METAL BELLOWS COUPLINGS
VRSATIL AND PRCIS. K SRIS MK 0.05 10 Nm MINIATUR MTAL BLLOWS COUPLINS TH ULTIMAT COUPLIN FROM 0.05 10 Nm BACKLASH FR MINIATUR BLLOWS COUPLINS MODLs PROPRTIS APPLICATION examples MK1 with radial set screws
More informationML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES!
ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR Compact and easy to install, a low cost linear solution perfectly suited for the medical industry, life science and small scale automation applications.
More informationRotary Series Rotary Series: Direct Drive Precision Stages
Rotary Series Rotary Series: Direct Drive Precision Stages Parker Bayside s Direct Drive Rotary Stages feature a robust construction and high performance in a compact package, providing smooth, near-frictionless
More informationISOMOVE. Mechanical actuators ISO 6431
ISOMOVE Mechanical actuators ISO 6431 ISOMOVE INDEX 2 Introduction 4 Mounting information and advices 6 10 40 14 20 63 25 80 29 33 Overall dimensions INTRODUCTION GENERAL FEATURES The ISOMOVE actuators
More informationConnection technology for Linear Motion Systems 1.3
Connection technology for Linear Motion Systems 1.3 2 Connection technology for Linear Motion Systems 1.3 Connection technology for Linear Motion Systems 1.3 3 Contents 4 Combination options for -Z linear
More information"PKX" Series Right Angle ServoFit Precision Planetary Gearhead Performance Specification Overview
P "P" Series Right Angle Performance Specification Overview P221 P222 P21 P22 P421 P422 P521 P522 P721 P722 P821 P822 P922 4 5 4 7 5 8 7 8 Acceleration Torque in.lbs. 195 576 106 2,657 6,201 14,17 26,574
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
More informationMechanical Motion. Control Components. and Subsystems. Understanding How Components Effect System Performance
Mechanical Motion Control Components and Subsystems Understanding How Components Effect System Performance Mechanical Motion Control Components and Subsystems Overview: Bearings Linear Bearing Technologies
More informationHighest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
More informationPrecision on the highest level
6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,
More informationElectromagnetic clutch-brake combinations INTORQ
Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview
More informationCandy Coup-Link OVER YEARS OF INNOVATION
Candy Coup-Link Zero-backlash, flexible-shaft couplings High torque, excellent response Accommodates misalignment and shaft endplay Aluminum and stainless steel options Inch and metric bores available
More informationHydraulic Drive Technology for Woodworking Machinery
Hydraulic Drive Technology for Woodworking Machinery 1 Drive & Control everything for keeping things moving. Whether your drive and control solutions are hydraulic, pneumatic, electric or mechanical being
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space
More informationLinear Axes Technical Data Summary
components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationLinear actuator with integral planetary gearbox and servomotor
Linear actuator with integral planetary gearbox and servomotor Series MLF 52155 ZR.. GTRI/.., MKUSE 25 ZR.. GTRI/.. Linear actuators with an integral gearbox and motor are ready-to-fit, driven linear units
More informationThe DPQ Series 2X Digital Injection Process Controller
Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service The DPQ Series 2X Digital Injection Process Controller The Drive & Control Company 1 The Injection Process Perfect
More informationBevel gearboxes. Catalogue
Bevel gearboxes Catalogue INDEX Bevel gearbox description... page 2 Manufacturing features... page 2 Materials and components... page 4 Bevel gearbox selection... page 5 Thermal power limit... page 7
More informationInner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35
More informationHighest Precision: Dyna Series
Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationNew Fixed Displacement Industrial Hydraulic Power Packs
New Fixed Displacement Industrial Hydraulic Power Packs Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 3000 PSI Flow: 0.4 to 10 GPM Fixed displacement
More informationSizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
More informationSizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More information