Technical Data and Dimensions EMC

Size: px
Start display at page:

Download "Technical Data and Dimensions EMC"

Transcription

1 Technical Data Electromechanical Cylinders EMC 5 Technical Data and Dimensions EMC Sizes 3 to 00 follow the standard cylinder series according to ISO 555. Built-in ball screw drives have a diameter of mm to 40 mm. The EMC size is selected according to: Thrust Stroke Linear speed The actual values must be smaller than the maximum permissible values. C EMC d 0 = dynamic load rating of the EMC = nominal diameter of ball screw F max EMC = maximum load M P P = max. drive torque at drive journal = ball screw lead s max perm. = maximum permissible travel distance v max = max. permissible linear peed Maximum travel distance s max per customer specifications (minimum 00 mm) EMC size Ball screw d 0 P C ) EMC F ) max EMC M ) p v 3) max s max perm. (mm) (mm) (N) (N) (Nm) (m/s) (mm) ) Acceptable loads (recommended from experience): With respect to the desired service life, loads up to about 0% of the load rating have proved acceptable. ) The achievable values may vary depending on the version, mounting orientation and maximum travel range s max! Charts page 4. 3) Depends on s max! Charts page. Operating conditions Normal operating conditions Ambient temperature 0 C C Load See Technical Data Duty cycle 00% R30A 3306/0.0, Bosch Rexroth Corporation

2 6 Electromechanical Cylinders EMC Technical Data Technical Data and Dimensions EMC Constants ) EMC size Ball screw Weight Total axial backlash ) for Frictional torque d 0 P Ball nut with reduced backlash Ball nut with % preload M RS k j fix k j var k j m (mm) (mm) (kg) (mm) (mm) (Nm) s max s max s max s max s max s max s max s max s max s max s max s max s max s max s max s max s max s max s max ) Total axial backlash of EMC when new ) For calculation of the mass moment of inertia M RS = frictional torque of system k j fix = constant for fixed-length portion of mass moment of inertia k j m = constant for mass-specific portion of mass moment of inertia k j var = constant for variable-length portion of mass moment of inertia EMC with Rexroth mounting elements For more information please refer to page The permissible axial forces for the mechanical cylinder system are reduced when the Rexroth mounting elements are used. The actual load must not exceed the values in the table. F < F max EMC with Rexroth mounting elements The maximum attainable forces of the EMC/motor combination can be determined by referring to the Calculations section. EMC size Ball screw Max. axial force (N) d 0 xp (mm) F ) max EMC F max EMC with Rexroth mounting elements 3 x x x x x x x x x x x x x x x x x x x ) F max EMC = maximum load Bosch Rexroth Corporation, R30A 3306/0.0

3 Technical Data Electromechanical Cylinders EMC 7 Shown in a retracted position K X L Z V A V FB X V FD V D W H A M SW E TG ØBA ØMM ØB ØKK ØDZ T G E W A K W L K = V B +S max V G L S max K X = width across flats of the nut SW = width across flats of the bolt X RT R L B G EMC size Dimensions (mm) B B A B G D Z E K K K W K X L Z M M R T R L SW T G V A V D V FB V FD V G W A d d h7 ± 0. f8 ± 0. ± M0x M ± Mx M ± M6x M ± M6x M ± M0x M ± M0x M ± EMC length EMC size Ball screw size Dimensions (mm) A M V B W H 0. 3 x 5R x x 0R x x 5R x x 0R x x 6R x x 5R x x 0R x x 0R x x 5R x x 0R x x 5R x x 5R x x 0R x x 0R x x 3R x x 5R x x 0R x x 0R x x 40R x L K = V B + s max L = L K + A M + W H Maximum travel = effective stroke + excess travel Excess travel Maximum travel s max Effective stroke For safe operation, the excess travel must be longer than the braking distance. The acceleration travel can be taken as a guideline value for the braking distance. In most cases, this will be sufficient: Excess travel = screw lead (P) Example: Ball screw (d 0 x P) x 5: Excess travel = 5 mm = 0 mm Maximum travel distance s max per customer specifications (minimum 00 mm) Excess travel (mm) R30A 3306/0.0, Bosch Rexroth Corporation

4 8 Electromechanical Cylinders EMC EMC with Motor Mount and Coupling EMC with Motor Mount and Coupling The motor mount serves to fasten the motor to the EMC and acts as a closed housing for the coupling. The coupling transmits the motor drive torque free of distortive stresses to the EMC s ball screw journal. When an EMC is ordered with motor mount, motor and foot mounting, this will be delivered pre- assembled. If the foot mounting is to be retrofitted to the cylinder end cap, the motor mount has to be removed first. For more information, see Mounting Instructions for EMC, R Mounting orientation of motor mount and coupling Lube fitting on EMC T-slots for switches on EMC 3 Motor connector 3 Bosch Rexroth Corporation, R30A 3306/0.0

5 EMC with Motor Mount and Coupling Electromechanical Cylinders EMC 9 Shown in a retracted position L m L f D s max EMC size Motor Coupling Dimensions (mm) Mass moment of inertia Rated torque Mass of motor mount and coupling J c M cn m D L f L m (x0 6 kgm ) (Nm) (kg) without brake with brake 3 MSM 09B MSM 03B MSK 030C MSM 09B MSM 03B MSK 030C MSM 03B MSK 030C MSK 040C MSM 04B MSK 040C MSK 050C MSK 040C MSK 050C MSK 060C MSK 076C MSK 060C MSK 076C R30A 3306/0.0, Bosch Rexroth Corporation

6 Electromechanical Cylinders EMC EMC with Belt Side Drive 0 EMC with Belt Side Drive This configuration of the EMC results in the shortest possible installation length. The compact, closed housing protects the belt, secures the motor and serves as a base for fastening mounting elements. The following gear ratios are available: i=: i = :.5 i=: The timing belt side drive can be mounted in three different directions (RV0 to RV03). Mounting elements are attached at the rear end of the belt drive. The screws are included in the delivery of the mounting elements. Before attaching the mounting elements, remove the set screws from the timing belt side drive. Mounting orientations for the timing belt RV0 RV0 side drive Lube fitting on EMC Motor connector RV03 Bosch Rexroth Corporation, R30A 3306/0.0

7 EMC with Belt Side Drive Electromechanical Cylinders EMC Shown in a retracted position L m K E L sd T G D G s max T G F G EMC Motor Re- Timing belt side drive Dimensions (mm) size duc- Type ) E L sd F G G K T G M T M D L m tion J sd M R sd m sd Brake i ( 0 6 kgm ) (Nm) (kg) w/o with 3 MSM 09B A MSM 03B B M MSK 030C B MSM 03C A A MSK 030C A M A MSK 040C B B MSM 03C A A MSM 04B A A M8 6 9 MSK 040C A A MSK 050C B MSM 04B A A MSK 040C A A M8 6 MSK 050C B B MSK 060C B MSK 050C A A MSK 060C B M B MSK 076C B MSK 060C A A M0 6 MSK 076C B B J sd Mass moment of inertia of timing belt side drive (at motor journal) M R sd Frictional torque of timing belt side drive m sd Mass of the timing belt side drive M sd Maximum permissible drive torque of the timing belt side drive! Table page 5 ) See page 5, Table for drive torque according to lead and SD type R30A 3306/0.0, Bosch Rexroth Corporation

Electromechanical Cylinders EMC R310EN 3308 ( )

Electromechanical Cylinders EMC R310EN 3308 ( ) Electromechanical Cylinders EMC R310EN 3308 (2011-09) Electromechanical Cylinders EMC 3 Electromechanical Cylinders EMC Standards and Safety 4 A Solution to Many Problems 8 Product Overview 10 Structural

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module

More information

Electromechanical Cylinder EMC

Electromechanical Cylinder EMC Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems

More information

Precision Modules PSK. The Drive & Control Company

Precision Modules PSK. The Drive & Control Company Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear

More information

EMC-HD. C 01_2 Subheadline_15pt/7.2mm

EMC-HD. C 01_2 Subheadline_15pt/7.2mm C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder

More information

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK) 10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact

More information

Miniature Linear Modules MKK/MKR The Drive & Control Company

Miniature Linear Modules MKK/MKR The Drive & Control Company Miniature Linear Modules MKK/MKR 12-40 The Drive & Control Company 2 Miniature Linear Modules R310A 2418 (2009.05) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR 9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

Compact Modules CKK/CKR 9-70

Compact Modules CKK/CKR 9-70 Compact Modules CKK/CKR 9-70 (with Ball Rail System, Ball Screw Drive or Toothed Belt Drive) R310EN 2624 (2008.10) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball

More information

Compact Modules CKK/CKR 9-70

Compact Modules CKK/CKR 9-70 Compact Modules CKK/CKR 9-70 with Ball Screw Drive and Toothed Belt Drive The Drive & Control Company 2 Compact Modules CKK/CKR 9-70 R310A 2624 (2009.05) Linear Motion and Assembly Technologies Ball Rail

More information

Ball Screw Assemblies eline. The Drive & Control Company

Ball Screw Assemblies eline. The Drive & Control Company Ball Screw Assemblies eline The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies eline BSA R310A 3314 (2005.04) Linear Motion Technology Ball Rail Systems Standard

More information

Omega Modules OBB R310EN 2407 ( )N. The Drive & Control Company

Omega Modules OBB R310EN 2407 ( )N. The Drive & Control Company Omega Modules OBB R310EN 2407 (2011-09)N The Drive & Control Company The ideal system solution for the ideal application EasyHandling Basic Comfort Advanced Mechanical and pneumatic components, grippers,

More information

Slotted nut NMG. Housing nut GWR. Bosch Rexroth AG. for economical constructions. a min. 0,3. M A = tightening torque of slotted nut.

Slotted nut NMG. Housing nut GWR. Bosch Rexroth AG. for economical constructions. a min. 0,3. M A = tightening torque of slotted nut. R310EN 3301 (2009.08) Precision Ball Screw Assemblies Bosch Rexroth AG 113 Slotted nut NMG for economical constructions B D d d1 b M A = tightening torque of slotted nut a min. 0,3 Polyamide insert Designation

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts

More information

eline Ball Screw Assemblies

eline Ball Screw Assemblies eline Ball Screw Assemblies R310EN 3314 (2005.06) The Drive & Control Company R310EN 3314 (2005.06) Bosch Rexroth AG 3 Product Overview 4 Technical Data 6 with Screw-in Single Nut ZEV-E-S Single fixed

More information

camoline Cartesian Motion Building System R310EN 2605 ( )

camoline Cartesian Motion Building System R310EN 2605 ( ) camoline Cartesian Motion Building System R310EN 2605 (2009.08) The Drive & Control Company Modularity for best effectiveness Efficient Handling Solutions more than just a system Bosch Rexroth AG 2 Our

More information

Electric Mini Slides MSC-EL

Electric Mini Slides MSC-EL Electric Mini Slides MSC-EL R10EN 2604 (11.08) The Drive & Control Company Electric Mini Slides, MSC-EL R10EN 2604 (11.08) Mini Slides, MSC-EL Product Description 4 Selection Guide 6 Maximum thrust 6

More information

Ball Screw Assemblies

Ball Screw Assemblies Ball Screw Assemblies ECO-Line The Drive & Control Company Ball Screw Assemblies Product Overview ECO-Line Ball Screw Assemblies ECO-Line Ball Screws are available from stock as complete assemblies, with

More information

Sizes 32, 40, 50 and 63

Sizes 32, 40, 50 and 63 > Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary

More information

Rexroth Linear Motion Technology

Rexroth Linear Motion Technology Linear Modules Robotic Erector System for Linear Modules RE 82 402/2003-10 The Drive & Control Company 1 RE 82 402/2003-10 Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard

More information

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17

More information

STAR Ball Rail Tables TKK

STAR Ball Rail Tables TKK before operating X4 X8 X3 X1 X2 S1 S2 12 4 13 5 14 6 15 7 16 8 1 2 3 9 10 11 1 2 3 4 5 6 8.8 S3 X30 Indramat DANGER! AC-CONTROLLER High voltage Danger of electrical shock Do not touch electrical connnections

More information

Linear Actuator with Toothed Belt Series OSP-E..B

Linear Actuator with Toothed Belt Series OSP-E..B Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7

More information

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology

More information

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam. Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely

More information

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials:

Standards ISO Max. particle size 50 µm. Pressure for determining piston forces 6 bar. Materials: Bosch Rexroth AG Pneumatics Ø - 100 mm Ports: M5 - double-acting with magnetic piston cushioning: elastic piston rod: Standards ISO 21287 Compressed air connection internal thread 00119673 Working pressure

More information

Miniature Ball Rail Systems

Miniature Ball Rail Systems R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail

More information

EMC-HD. Electromechanical Cylinder. EMC-HD Overview

EMC-HD. Electromechanical Cylinder. EMC-HD Overview Electromechanical Cylinder EMC-HD 1 Electromechanical Cylinder Heavy Duty (EMC-HD) Key data for EMC-HD: Electromechanical Cylinder EMC-HD available with ball or planetary roller screw drive Sizes: EMC-085-HD,

More information

KLM. Application example. Linear modules Pneumatic Stroke module. 1 Single base support, SOE Adapter plate, APL 121

KLM. Application example. Linear modules Pneumatic Stroke module.  1 Single base support, SOE Adapter plate, APL 121 KLM www.comoso.com Sizes 25.. 100 Mass 0.5 kg.. 5.18 kg Driving force 50 N.. 294 N Stroke 25 mm.. 225 mm Repeat accuracy ± 0.01 mm.. ± 0.015 mm Application example 4 5 3 3 6 7 2 2 8 1 1 Pneumatic two-axis

More information

Linear Drive with Ball Screw Drive Series OSP-E..SB

Linear Drive with Ball Screw Drive Series OSP-E..SB Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions

More information

Technical Data, Dimensioning, Mounting

Technical Data, Dimensioning, Mounting 6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation

More information

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46 Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS

More information

R310EN 2211 ( ) The Drive & Control Company

R310EN 2211 ( ) The Drive & Control Company eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball

More information

PARALLEL INDEX DRIVES TP Series

PARALLEL INDEX DRIVES TP Series PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN

More information

TRACK GUIDANCE SYSTEMS

TRACK GUIDANCE SYSTEMS EURO-BEARINGS LTD TRACK GUIDANCE SYSTEMS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com INTRODUCTION EURO-BEARINGS LTD www.euro-bearings.com Tel. 01908 511733 This linear guidance

More information

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders

More information

Cam roller guide LF6S complete axis

Cam roller guide LF6S complete axis Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

LINEAR UNITS CT & MT

LINEAR UNITS CT & MT LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35

More information

Precision on the highest level

Precision on the highest level 6 - line Precision on the highest level The series is the standard Neugart inline high precision planetary gearhead for applications with very high precision requirements. Whether high torque density,

More information

Synchronous servo motors. IndraDyn S MSK - to meet all requirements

Synchronous servo motors. IndraDyn S MSK - to meet all requirements IndraDyn S MSK - to meet all requirements Bosch Rexroth AG Electric Drives and Controls Compact and powerful Documentation Project Planning Manual Application Manual - For Potentially Explosive Areas Maximum

More information

Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces

Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed

More information

COMBIBOX. Program Schedule. Design. COMBIBOX clutch-brake-combination type 10 / 09 / 06. Attachments

COMBIBOX. Program Schedule. Design. COMBIBOX clutch-brake-combination type 10 / 09 / 06. Attachments clutch-brake-combination 10 / 09 / 06 with an energised to engage single sided clutch / brake... 10 with an energised to engage single sided clutch without brake... 09 with an energised to engage single

More information

RIGHT ANGLE DRIVES TG Series

RIGHT ANGLE DRIVES TG Series RIGHT ANGLE DRIVES TG Series Right Angle Fixed Index Drives TG Series The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion

More information

PRS Series Planetary Roller Screws. A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew

PRS Series Planetary Roller Screws. A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew PRS Series Planetary Roller Screws A Superior Alternative to Hydraulic or Pneumatic Motion Providing 15 times the Life of a Ballscrew Exlar Roller Screw Advantage Roller Screw Overview A roller screw is

More information

Mini slides SLTE, electric

Mini slides SLTE, electric Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel

More information

SUMMARY. Contents. Chapter

SUMMARY. Contents. Chapter SUMMARY Chapter Contents 1 General information...2 1.1 Symbols and units of measurement...2 1.2 Features of MP series...3 1.3 Versions...4 1.4 Selecting the gear unit...5 1.5 Service life of bearings...6

More information

Standard gripper Series GSP

Standard gripper Series GSP Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Standard gripper Series GSP Technical Data Products Series GSP-P

More information

eline Profiled Rail Systems

eline Profiled Rail Systems eline Profiled Rail Systems with Ball and Cam Roller Runner Blocks R310EN 2211 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail

More information

Runner block FNS R Flanged, normal, standard height

Runner block FNS R Flanged, normal, standard height 38 Bosch Rexroth Corporation Roller Rail Systems R310A 30 (007.06) Standard Runner Blocks, Steel version Runner block FS R1851... 10 Flanged, normal, standard height Further runner block versions with

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

Synchronous servo motors. IndraDyn S MSK - to meet all requirements

Synchronous servo motors. IndraDyn S MSK - to meet all requirements IndraDyn S MSK - to meet all requirements Bosch Rexroth AG Electric Drives and Controls Compact and powerful Maximum torques up to 495 Nm Maximum speeds up to 9,000 rpm Encoder systems for a wide and diverse

More information

Linear Guides Series OSP-P

Linear Guides Series OSP-P Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing

More information

POWER GEAR. The HighSpeed bevel gearbox.

POWER GEAR. The HighSpeed bevel gearbox. MS-Graessner GmbH & Co. KG THE GEAR COMPANY POWER GEAR The HighSpeed bevel gearbox HS www.graessner.de Nothing but highlights! Designed for special requirements no adaption, no compromises: There are decades

More information

...components in motion. Miniature Linear Guideways

...components in motion. Miniature Linear Guideways ...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape

More information

Flexible pin & bush coupling

Flexible pin & bush coupling Technical data KX-D Technical data Torque [Nm] NBR 80 Sh-A GJL Steel Dyn. torsion spring stiffness [Nm/rad] Max. speed Max. speed Rated Max. Vibratory [rpm] with Max. bore [mm] [rpm] with Max. bore [mm]

More information

Precision Positioning Table LH

Precision Positioning Table LH CTLH32M Precision Positioning Table LH TSLH12M/J Table with bellows 12 -M Depth 1( 1 ) 1( 1 ) 32 29 29 18 19 -M8 Depth 16 13 (3.7) (7.3) L 1( 2 ) (2.3) E S/2 13 S/2 E (2.3) 1 1 12 TSLH M CTLH M 28 7 Hole

More information

BM spiral bevel gear boxes

BM spiral bevel gear boxes M spiral bevel gear boxes Solid and Hollow Shaft Design ycloidal gear boxes Planetary gear boxes evel gear boxes Planetary bevel gear boxes Hypoid gear boxes Gear technology EPPIGER M bevel gear boxes

More information

Roller guide actuators - SQ ZST

Roller guide actuators - SQ ZST Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple

More information

Axial Piston Fixed Pump A2FO

Axial Piston Fixed Pump A2FO Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal

More information

End bearings for screw ends form and

End bearings for screw ends form and R310EN 3301 (2009.08) Precision all Screw Assemblies osch Rexroth AG 91 En bearings for screw ens form 931 93 an 941 94 Pillow block unit SE-F earing LAF earing LAN Shown with slotte nut NMA Shown with

More information

Servo pillar CPSM. Тел.: (495) The irst telescopic pillar with servo-power for industrial applications

Servo pillar CPSM.  Тел.: (495) The irst telescopic pillar with servo-power for industrial applications Servo pillar CPSM The irst telescopic pillar with servo-power for industrial applications High load capability High speed capability Virtually maintenance free Telescopic pillars CPSM are the ideal solution

More information

-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features

-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion

More information

Ball Rail Systems BSCL. Ball Runner Blocks, Ball Guide Rails, accessories

Ball Rail Systems BSCL. Ball Runner Blocks, Ball Guide Rails, accessories Ball Rail Systems BSCL Ball Runner Blocks, Ball Guide Rails, accessories 2 Ball Rail Systems BSCL General product information The Ball Rail System Compact Line BSCL The new Ball Rail System BSCL (Ball

More information

124

124 124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High

More information

For new perspectives. WPLE - line WPLE

For new perspectives. WPLE - line WPLE 54 - line For new perspectives The is the logical refinement of our PLE series. This bevel gearbox series was designed especially for space-saving installation in a right-angle position of the motor/gearbox

More information

SPH Series GAM CAN, JUST ASK!

SPH Series GAM CAN, JUST ASK! SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile

More information

COMBIBOX. Program Schedule. with an energised to engage single sided clutch without brake... COMBIBOX 09

COMBIBOX. Program Schedule. with an energised to engage single sided clutch without brake... COMBIBOX 09 COMBIBOX clutch-brake-combination 10 / 09 / 06 with an energised to engage single sided clutch / brake... COMBIBOX 10 with an energised to engage single sided clutch without brake... COMBIBOX 09 with an

More information

PNCE ELECTRIC CYLINDERS

PNCE ELECTRIC CYLINDERS ELECTRIC CYLINDERS Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

HepcoMotion. SBD Sealed Belt Drive

HepcoMotion. SBD Sealed Belt Drive HepcoMotion SBD Sealed Belt Drive Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load

More information

Linear Bushings and Shafts. The Drive & Control Company

Linear Bushings and Shafts. The Drive & Control Company Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail

More information

Catalogue. Portal Axes PAS

Catalogue. Portal Axes PAS Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................

More information

Flexible Couplings N-EUPEX Series

Flexible Couplings N-EUPEX Series Flexible Couplings N-EUPEX eries /2 Overview /3 Benefits /3 Application /3 Function /4 Design / Technical data /10 Type A for easy elastomer flexible replacement /10 election and ordering data /11 Type

More information

OSPE..BHD Belt-Driven Actuators

OSPE..BHD Belt-Driven Actuators OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing

More information

Axial-radial cylindrical roller bearings

Axial-radial cylindrical roller bearings Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller

More information

Electromagnetic clutch-brake combinations INTORQ

Electromagnetic clutch-brake combinations INTORQ Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview

More information

HT hypoid bevel gear boxes

HT hypoid bevel gear boxes HT hypoid bevel gear boxes Solid and Hollow Shaft Design Cycloidal gear boxes Planetary gear boxes evel gear boxes Planetary bevel gear boxes Hypoid gear boxes Gear technology Eppinger hypoid gear boxes

More information

Linear Motion Technology Handbook. The Drive & Control Company

Linear Motion Technology Handbook. The Drive & Control Company Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl

More information

Standard cylinders DDPC, with measured-value transducer DADE

Standard cylinders DDPC, with measured-value transducer DADE Features Components for positioning and measuring using the standard cylinder DDPC Measuring with measured-value transducer DADE Positioning with end-position controller SPC11 or controller module CPX-CMAX/-CMPX

More information

Linear Bushings and Shafts

Linear Bushings and Shafts Linear Bushings and Shafts 45 b 1cr RA 83 100.1 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum Runner

More information

Linear Actuator with Ball Screw and Extending Rod Series OSP-E..SBR. Contents Description Overview Technical Data Dimensions 110

Linear Actuator with Ball Screw and Extending Rod Series OSP-E..SBR. Contents Description Overview Technical Data Dimensions 110 Linear Actuator with Ball Screw and xtending Rod Series OSP-..SBR Contents Description Page Overview 103-106 Technical Data 107-109 Dimensions 110 103 The System Concept LCTRIC LINAR ACTUATOR FOR PRCIS

More information

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent

More information

Description Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range

Description Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range Coupling selection Normally the is selected according to the nominal torque ( ) shown in the list of technical data, like all other coupling systems. In all cases the torque ( ) must exceed the maximum

More information

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)

RE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP) RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can

More information

Linear Motion. Rail guide tables

Linear Motion. Rail guide tables Linear Motion Rail guide tables The SKF Group The SKF Group is an international industrial corporation of AB SKF Sweden, founded in 1907, operating in 130 countries. The company has some 45000 employees

More information

1.2 Selecting the gear unit Service life of bearings Version and input section Mounting positions MP

1.2 Selecting the gear unit Service life of bearings Version and input section Mounting positions MP SUMMARY 1 General information... 3 1.1 Symbols, units and definitions... 3 1.2 Selecting the gear unit... 4 1.3 Service life of bearings... 6 2 Features of MP series... 8 3 Ordering code... 10 3.1 Version

More information

1.2 Selecting the gear unit Service life of bearings Version and input section Mounting positions TR

1.2 Selecting the gear unit Service life of bearings Version and input section Mounting positions TR SUMMARY 1 General information... 3 1.1 Symbols, units and definitions... 3 1.2 Selecting the gear unit... 4 1.3 Service life of bearings... 6 2 Features of TR series... 8 3 Ordering code... 10 3.1 Version

More information

Linear Bushings and Shafts

Linear Bushings and Shafts Linear Bushings and s R310EN 3100 (2004.09) The Drive & Control Company R310EN 3100 (2004.09) Linear Bushings Bosch Rexroth AG 3 Linear Bushings and s Selection Guide 9 Product Overview 10 Overall Dimensions

More information

ISOMOVE. Mechanical actuators ISO 6431

ISOMOVE. Mechanical actuators ISO 6431 ISOMOVE Mechanical actuators ISO 6431 ISOMOVE INDEX 2 Introduction 4 Mounting information and advices 6 10 40 14 20 63 25 80 29 33 Overall dimensions INTRODUCTION GENERAL FEATURES The ISOMOVE actuators

More information

Features of the Ball Screw

Features of the Ball Screw Features of the Driving Torque One Third of the Sliding Screw With the, balls roll between the screw shaft and the nut to achieve high effi ciency. Its required driving torque is only one third of the

More information

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

Linear actuators ATL Series

Linear actuators ATL Series . TECHNICAL DATA - acme screw linear actuators ATL Series SIZE ATL 0 ATL 5 ATL 8 ATL 30 ATL 40 Push rod diameter [mm] 5 30 30 35 40 Outer tube diameter [mm] 36 45 45 55 60 Front attachment diameter [mm]

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information