HOUGEN HMD505 EXPLODED VIEW , , &

Transcription

1 HOUGEN HMD0 EXPLODED VIEW 000, 000, 000 & 000 0, The 000 is assembled with a Type I Plug. The 000 is assembled without an electrical plug at the end of the power cord. a c 0 b,0 0 End Panel Assembly 0v 0 End Panel Assembly 0v 0 B.H.C Screw #0- X / 0 Carrying Handle Coolant Bottle Assembly 00 S.H.C Screw / X -/ 0 Gear Box Assembly 0 S.H.C Screw #0- X / 0 Motor Assembly 0v 0 Motor Assembly 0v 0 Power Cord Assembly 0v (000) Power Cord Assembly 0v (000) Power Cord Assembly 0v (000 type I plug) Power Cord Assembly 0v (000 no plug) 0 Magnet/Safety Switch Assem.0v Magnet/Safety Switch Assem.0v 0 SHC Screw /-0 X / 0 Quill Stop Spring 00 Set Screw /- X / Spline Shaft Extension 000 Housing Assembly 00 SHC Screw /-0 X Seal / ID X / OD Quill / Arbor Assembly 0 00 Front Panel Assembly 0v 0 Front Panel Assembly 0v 0 SHC Screw #0- X 0 SHC Screw #0- X / Spring O-Ring Spring Plunger 0 SCR Self-Tap 0- X / 0 Retaining Ring 00 #0 Lock Washer 00 / Lock washer 0 00 #0 Flat washer 0 Grease, Lubrplate.0oz 0 Feed Hub Assembly (includes a-c) a 0 Feed Handle b 0 Handle Knob c 00 Feed Hub Knob See Following Pages For Assembly Breakdowns.

2 0 Gear Box Assembly 0 Gear Shift Handle 0 Gear Switch Plate 0 Gear Shift Pin 0 Gear Shift Yoke 0 Dowel Pin / X -/ 0 Gear Shift Spacer 0 SHSLD Screw / X / 0 FHSC Screw #0- X / 00 Spring 0 00 Gear Box Assembly (includes a-c) 0a 0 Lip Seal 0b 0 Hougen Label 0c 00 Drill Speed Label 0 Gear & Shaft Assembly 0 Gear / Tooth 0 Gear & Shaft Assembly /0 Tooth 0c 0 0b 0 Gear & Shaft Assembly Tooth 0 Gear & Shaft Assembly Tooth 0 Spline Shaft Assembly 0 Cover & Bearing Assembly 00 Key / sq. X.0 0 SHC Screw - X / 0a 0 00 SHC Screw 0- X / Grease Lubriplate GR 0 Lip Seal These Parts Are Included In Kit Ball Bearing 0v Magnet Assembly 0v Magnet Assembly 0 Magnet Assembly 0v 0 Magnet Assembly 0v 00 Safety Switch Assy. Plunger Assembly 00 Safety Switch Bracket (0v) (0v) 0 Shield 0 Screw SHC /-0 X / 0 Screw BHC - X / Spring 0 Screw SHC 0- X / 0 D Ring Wide 0 Plate - Chain Hold down

3 0 0v Motor Assembly 0 0v Motor Assembly 0 Motor Housing Assy. 0v 0 (0v) (0v) a 0 HMD0 Label b 0 Motor Specs Label 0v 0 Motor Housing Assy. 0v a 0 HMD0 Label b 0 Motor Specs Label 0v Motor Baffle INCLUDES MOTOR CORD 0 Access Door 0 Armature 0v 0 Armature 0v 0 Field Assembly 0v 0 Field Assembly 0v 0 Strain Relief 0 Carbon Brushes 0v/0v 0 Brush Cap 0 00 Screw #0 X -/ Self Tapping Screw #0 X / Self Tapping 00 - Connector 0 Spring Washer Arbor / Quill Assembly 0 Set Screw /- X.0 0 Thrust Bearing Seal 0 Thrust Bearing 0 Thrust Washer 0 Quill Washer Retaining Ring 0

4 HMD0 HOOK UP DIAGRAM 0 WIRE HARNESS WIRE HARNESS

5 HMD0 PANEL PARTS 0 Sponge Seal 0 Relay 0 Faceplate Front 000 Terminal Piggy Back 0 Terminal Spade 00 Rectifier 0 Nylon Nut 0 Nut #- Jam 0 Surge Suppressor (0v) 00 Surge Suppressor (0v) 0 0 Female Terminal / GA 0 Capacitor (0v) 00 Capacitor (0v) 0 Terminal Female 0 Spacer 0 Terminal Strip 0 Terminal Jumper Circuit Breaker A (0v) Circuit Breaker A (0v) Cover 0 Double Terminal 00 Relay A (0v) 0 Relay A (0v) 0 00 Adhesive 0 Terminal Male Insulator 00 Female terminal / GA. 00 Terminal Piggy Back 0 Switch Off 0 Red Seal 0 Switch On 0 Green Seal 0 Rocker Switch (0v) 0 Rocker Switch (0v) 0 Faceplate End

6 NOTES

7 OPTIONAL PRESSURIZED COOLANT BOTTLE 0 Coolant Bottle Assembly Bracket 0 Quick Fitting / Body Adapter O-Ring 0 Thumb Screw Flat Nylon Washer 00 Coolant Bottle Assembly includes a-c a 0 Fitting / NPT / Hose b 0 Shut Off Valve c 0 Quick Connector Commercial / Industrial Limited Warranty H year and or replace (at its option) without charge any items returned. This warranty is void if the item has been damaged by accident or unreasonable use, is given or authorized. Hougen Manufacturing, Inc. disclaims any implied warranty of MERCHANTABILITY or FITNESS for any period beyo of incid purchase, the above exclusion and limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. To obtain warranty service, return the item(s), transportation prepaid, to your nearest Factory Authorized Warranty Repair Center or to Hougen Manufacturing, Inc., 00 Hougen Drive, Swartz Creek, Michigan. Hougen Drills are warranted against manufacturing defects only. Subject to Hougen Manufacturing inspection. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 00 Hougen Manufacturing, Inc. This product is covered under the following U.S. patent: 00 Photographs and Specifications shown are accurate in detail at time of printing. Manufacturer reserves the right to make improvements and modifications without prior notice. Hougen and the Hougen logo are proprietary trademarks of Hougen Manufacturing Inc.