Sidewall Couplers 3dB W/G Size
|
|
|
- Kerry Todd
- 5 years ago
- Views:
Transcription
1 SIDEWALL COUPLERS Sidewall Couplers 3dB WR A 22HS WR A 28HS A 28HSA A 28HS A 28HS A 28HS62 * WR A 42HS B 1 42HS B.87C B.32C C 1 42HS A 42HS A 42HS WR A 42HS22.500(R) WR A 51HS A 51HS A 51HS A 51HS WR B 5 51HS B.42C Tapered to 1.75B' 1.31C' WR B 7 51HS B.42C B' 1.31C' WR A 62HS A 62HS Except as Noted Output power Unbalance (dbmax.) ±0.25 Isolation (db min.) 30 Notes: X Unbalance ±.50 db max. Isolation 25 db min. * Isolation 28 db min. Unbalance ±.15 db max. These models have been tested and exhibit reasonable electrical characteristics over extended frequency range. Specific data available on request. 1 Dual flat flange with four.1 dia. cleared holes 42FS32 2 Dual flat flange with six.120 dia. cleared holes 10FS22 3 Material BECU only 5 Dual sidewall flat flange four dia. holes 62FS52 7 Dual choke pressure flange 62FS12 four dia. holes
2 SIDEWALL COUPLERS WR62 (cont.) B 6 62HS B 1.31C B'.48C' * 1A 62HS A 62HS A 62HS B 6 62HS B 1.31C B'.48C' A 62HS A 62HS A 62HS B 8 62HS B 1.31C B'.48C' B 9 62HS B 1.31C B'.48C' A 62HSA B 7,11 62HSA B 1.31C B'.50C' B 5 62HSA B 1.31C B'.50C' A 62HSA WR A 62HSA (R) WR HGT A B62HS D B62HS WR A 75HS A 75HS A 75HS *+ 1A 75HS A 75HS WR HGT A A75HS WR A 90HS B 3 90HS B 1.62C Except as Noted Output power Unbalance (dbmax.) ±0.25 Isolation (db min.) 30 Notes: * Isolation 28 db min. + Unbalance ±.50 db. 5 Dual sidewall flat flange four dia. holes 62FS52 6 Dual S/W blank flange (no holes) 7 Dual choke pressure flange 62FS12 four dia. holes 8 Dual S/W flat flange four dia. holes 62FS92 9 Dual S/W pressure flange six dia. holes
3 SIDEWALL COUPLERS Sidewall Couplers 3dB WR90 (cont.) B 3 90HS B 1.62C A 1 90HS A 90HS A 90HSA A 90HS B B' B 4B 90HS B 1.63C B 4A 90HS B 1.63C A 90HS A 90HSA A 90HS B 3 90HS B 1.62C A 90HS B 4A 90HS B 1.63C A 90HS A 90HSA A 90HS C 2 90HS WR B 2 90HS (R) 2.84B 1.38C B'.58C' WR A 90HS (R) A 90HS (R) A 90HS (R) A 90HS (R) B 3 90HS (R) 2.54B 1.62C B'.61C' WR A 90HS (D) A 90HS (D) WR A 90HS B.60C Tapered to 2.62B'.72C' WR112 WR A 90HS (R) 2.13B.62C Tapered to 2.60B'.71C' WR WR A A90HS HGT A A90HS A A90HS WR A B90HS B.63C Tapered to 2.14B'.53C'.300 HGT Notes: Isolation 27 db min. 1 No physical center wall.050 commonwall required by both mating components to function electrically 2 Flange blank 3 Dual S/W flat flanges six.9 dia. holes 90FS112 4A Dual S/W pressure flange 90FS152 six.9 dia. 4B Dual S/W pressure flange 90FS2 six 8/32 threaded
4 WR A B90HS (R) 2.10B.50C Tapered to 2.10B'.60C'.300 HGT A B90HS (R) 2.10B.50C B'.60C' WR A C90HS HGT WR A 102HS B 102HS B 1.78C B'.77C' WR A 112HS ** 1A 112HS ** 1B7 112HS A 112HS A 112HS B 112HS B 1.37C B'.72C' A 112HS A 112HS B B' B 5 112HS B 1.87C B'.73C' B 6 112HS B 1.38C B'.72C' A 112HS WR A 112HS (R) A 112HS (R) WR A 112HS (D) WR A* 137HS B 1 137HS B 1.61C B'.88C' A 137HS A 137HS A 137HS A 137HS WR A A137HS HGT WR B 2 B137HS B 1.40C HGT 3.09B' 0.69C' WR A 159HS A 159HS A 159HSA B 3 159HS B 1.67C B' 1.02C' C3 159HS SIDEWALL COUPLERS Notes: * Corrals same as Style 1B ** Isolation 28 unbalance,.35 db min. Unbalance ±.15 db max. Isolation 35 db min. 1 Dual S/W flat flange 137FS32 2 Dual S/W flat flange B 137FS12 5 Dual S/W pressurized choke flange six 0.9 dia. holes 112FS22 6 Dual S/W pressure flat flange ten 0.7 dia. holes 112FS102 7 Dual S/W flat flange ten 0.9 dia. holes 112FS82
5 WR A 187HSA B 4 187HSA B 1.77C C 4 187HS A 187HSA C 4 187HS B 4 187HS B 1.77C A 187HSA B 4 187HSA B 1.77C C 4 187HS A 187HS A 187HS A 187HSA B 5A 187HSA B 2.01C B' 1.14C' B 5B 187HSA B 2.01C B' 1.14C' WR C 3 187HS (R) A 187HS (R) A 187HS (R) A 187HS (R) B 5A 187HS (R) 5.02B 2.01C B' 1.20C' WR A 229HS WR A 284HS A 284HS C 6 284HS A 284HS A 284HS A 284HS A 284HS A 284HS A 8 A284HS A 7 A284HS WR A 284HS (R) Notes: 3 Blank flange 4 Dual s/w flat flange 187FS92 5A Dual sidewall flat pressure flange twelve dia. holes (187FS52) 5B Dual sidewall flat pressure flange twelve threaded holes (187FS62) 6 Dual S/W flat flange 284FS height height
Section 16. Short Slot Hybrids. Theory
Section Short Slot Hybrids Theory FIGURE 1 COUPLER TERMINOLOGY Coupling = Ratio A to C Balance = Ratio B to C Directivity = Ratio C to D Isolation = Ratio A to D Isolation = Coupling + Directivity PHASE
Section 3. Rotary Joints. Introduction
Section Rotary Joints Introduction For more than forty years, MDL has produced waveguide rotary joints and is one of the major suppliers in both domestic and overseas markets. Many of the larger military
Disc Valve Motors Integral Cross Over Relief Valve Technical Manual 2000 Series
Disc Valve Motors Integral Technical Manual 2000 Series Introduction Eaton Char-Lynn, your proven low speed high torque motor supplier, now offers the Char-Lynn 2000 Series motor with our proven Eaton
Main Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
Applicable Specs.: MIL-C-5501/7 (MIL-C-52078), NAS-834. Recommended closures for unthreaded standard weight pipe (Schedule 40) Caplug No.
TAPERED CAPS & PLUGS 1 T Series (Tapered Caps & Plugs) Tapered caps can be used as either caps or plugs. Because they are tapered in design and made from highly pliable (flexible) polyethylene, they not
MECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
EB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
Heavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
Feed Rolls 3940 and 3960 PTFH Upper Feed Rolls
Feed Rolls Upper Feed Rolls 12 3940 and 3960 PTFH 3940 and 3960 PTFH Feed Rolls 46 KEY PART NO. PART NAME QTY. SERIAL NO. 00 REMARKS 1 E52437 BUSHING 1 XX 2 34H353 SPRING PIN 1 X X 3/8" X 1-3/4" 3 24H1480
6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
FERRITE PRODUCTS TABLE OF CONTENTS
FERRITE PRODUCTS TABLE OF CONTENTS No. B002i SERIES FERRITE PRODUCTS Rectangular Waveguide Circulator 3 Port Junction Design 140 T173 Rectangular Waveguide Circulator 4 Port Differential Phase Shift Design
Powered Rota-Shaft Clamps with Cylinders
Powered Rota-Shaft Clamps with Cylinders A standard clamping package providing up to 165 right- or left-hand rotation, linear/rotary sequence. Independent ¾ or 1 1/8 dia. shafts are powered by 1 1/2",
Disc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
Section 5. Directional Couplers. Introduction
Section Directional ouplers Introduction t MDL, directional couplers have always received the engineering and manufacturing attention due a major component. wide variety of types are offered, often tailored
STEEL. P ole P roducts
STEEL P ole P roducts Value. Durability. Safety. SSS A Mounting Height Square Straight Steel Pole No Arm Removable Pole Cap (Tenon Option Available - See Mounting Designation) D Top Square B Wall Gauge
IECEx Certificate of Conformity Annexe
for Certificate No.: IECEx TSA 07.0024X Issue No.: 1 Equipment: Morley type BMW**, CMW** and DMW** Motors are TEWC three phase induction motors with terminal box intended for incorporation into mining
420 Mobile Piston Pump Service Parts Manual ADU041, ADU049, ADU062
420 Mobile Piston Pump Service Parts Manual ADU041, ADU049, ADU062 Exploded Assembly 420 Series Pumps 40 24 58 50 23 23 36 42 22 54 38 12 56 2 16 52 4 30 55 12 55 33 32 14 6 52 57 18 10 8 28 3 1 26 2 EATON
6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
CAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.
CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD. General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series
Valves, MRO Items, Heaters, Thermocouples, and so much more
Nozzle Tips, Nozzle Bodies, Valves, MRO Items, Heaters, Thermocouples, and so much more (800) 521-0704 Fax: (810) 227-2266 37 Summit Street, Brighton, MI 48116 37 Summit Street, Brighton, MI 48116 810.227.2266
VIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
Disc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
Waveguide Flanges. Rectangular Flanges. Double Ridge Flanges F-D SERIES
Waveguide Flanges Rectangular Flanges F SERIES Double Ridge Flanges F-D SERIES Materials Aluminium (Shown in blue type) Brass (Shown in black type.) Codes RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR
Disc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
PARTS CATALOG SHAFT HEDGE TRIMMER AHS243S(37) P Db
PARTS CATALOG SHAFT HEDGE TRIMMER 37000001 - P017-002550-13Db 1. CYLINDER, MUFFLER 1 A130-001710 1 CYLINDER NRCP 2 V100-000610 1 GASKET,CYL 3 900105-05016 4 BOLT, H.S. 5*16 5*16 4 A200-000910 1 INSULATOR,
PRICE LIST. ACURO TM brand Dynapar TM brand NorthStar TM brand INCREMENTAL ABSOLUTE
2014 North America, Latin America & Asia Pacific Effective January, 2014 Supersedes all previous issues INCREMENTAL ABSOLUTE E N C O D E R S PRICE LIST ACURO TM brand Dynapar TM brand NorthStar TM brand
Ordering Information
Ordering Information STUBS P/N ONE P/N TWO CONNECTOR and REFERENCE TERMINATION TERMINATIONS MATING CONNECTOR FIGURE 2 ESI-2210 ESI-2310 BJ770/PL75 1/2 2 ESI-2220 ESI-2320 BJ377/PL375 1/2 2 ESI-2230 ESI-2330
ST-50 SERIES ULTRASONIC TRANSDUCER
ST-50 SERIES ULTRASONIC TRANSDUCER Instruction Manual PL-418 December 1994 33454180 Rev 1.2 Thank you for purchasing Milltronics products. We endeavour to design equipment that is simple to use and reliable
SPECIFICATIONS for INTERNALLY TERMINATED COUPLERS
3.575 Bus-J1 ESI-2210 1 Stub-J2 Stub-J3.90.166 +.003 Dia. 3 X.487 Ref. 2.75 figure 1 J1 (BUS) J2 (STUB) J3 (STUB) - = 59 Ohms, 1%, 2W = 78 Ohms, 1%, 2W - = TURNS RATIO 1 : 1.41 TWO STUB ONE INTERNAL TERMINATION
# Order nr article description quantity 110 MMA machine left side MMA machine right side MMA rotor 1 140
# Order nr article description quantity 110 MMA 01 070 110 machine left side 1 120 MMA 01 070 120 machine right side 1 130 MMA 01 070 130 rotor 1 140 MMA 01 070 140 hydraulic system 1 150 MMA 01 070 150
TYPE OF MOUNTED BEARING. LER - Metal Labyrinth Ends Open. Pillow Block. (Inch Dimensions) 2 = 2 SS - Split P4B - 4 Bolt Base Pillow
IMPERIAL - ISAF NOMENCLATURE Complete Pillow Block - Inch P2B - 515 - USAF - 207 - TT HOUSING STYLE BEARING SERIES AND HOUSING SIZE TYPE OF MOUNTED BEARING SIZE INCHES SEAL TYPE UNIFIED SAF Plummer Blocks
VIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
AR35.20-P-0115B Remove/install wheel carrier
AR35.20-P-0115B Remove/install wheel carrier 31.8.11 MODEL 129, 170, 202, 208 MODEL 210 except CODE (979) Special protection version except CODE (Z06) B6 armoring Version up to 12/97 or 01/98 P35.20-0231-09
10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
LTV VALVE APPLICATION INSTRUCTIONS FOR
LTV VALVE APPLICATION INSTRUCTIONS FOR LOW TEMPERATURE PROTECTION COPPER-FIN AND POWER-FIN MODELS CB 495-2066 / CH 401-2071 AND PB 501-2000 Kit components: VAL30000-1 1/2" VALVE Models: CB 45-500 Figure
High-Temperature Accelerometers PIEZOELECTRIC SENSORS FOR DYNAMIC MEASUREMENTS
s PIEZOELECTRIC SENSORS FOR DYNAMIC MEASUREMENTS s 3311A 3133A2 3030B5H 3023AH Miniature Triaxial Miniature/ESS Ultra Miniature Triaxial Miniature Through-Hole +320 F (+160 C) operation Lightweight HALT
G3 UNIVERSAL GRIP CONFIGURATION GUIDE
G3 UNIVERSAL GRIP CONFIGURATION GUIDE www.ottoexcellence.com Industrial Grips for Demanding Applications OTTO serves agriculture, construction, off-highway, material handling and specialized industrial
Cylinders, Boosters, Accumulators & Accessories
Cylinders, Boosters, Accumulators & Accessories #MC1501Cyl Effective January 1, 2015 Supercedes price list dated June 15, 2014 5877 S. Pennsylvania Ave Cudahy, WI 53110 Phone: 414-769-9700 sales@milwaukeecylinder.com
Turbo Pressure Blowers
www.americanfan.com Bulletin VP4 Turbo Pressure Blowers Howden Industrial Fan Group American Fan / Joy Fan / Garden City Fan Features Heavy gauge continuously welded housings, reversible and rotatable
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body
HK Series - 2 Way 1HK to 8 HK 1 8" to 1" Body Series HK Couplings are designed for general purpose hydraulic service. Some are suitable for use with various liquids, chemicals, steam, gases, and vacuum.
Steel Chain Container Assemblies
Contents: Section Steel Chain Container Assemblies (Domestic production Ver.) For (N)ER2 Hoists 1/8 To 20 Ton Page 1) Purpose.. 1 2) Definitions and Notes... 2 3) Container Assembly Numbers, s, Weights
Air vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
GREAT PARTS FOR GREAT ENGINES LIGHT/MEDIUM DUTY DIESEL ENGINE KITS
GREAT PARTS FOR GREAT ENGINES LIGHT/MEDIUM DUTY DIESEL ENGINE KITS WWW.MAHLE-AFTERMARKET.COM 02 Great Parts for Great Engines GREAT PARTS FOR GREAT ENGINES MAHLE Aftermarket All of our engine kits contain
Uniflex-stow remote valve operating systems SafeOperator - Commercial range
Mini Flexible Gear Drive System 1 Welcome to Uniflex-stow remote mechanical valve operators. Our range is the most comprehensive solution for the remote operation of valves in every industry available
Cordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless. Systems
Hilti. Outperform. Outlast. 49 Introduction Introduction Page 51-52 Drill drivers compact drill driver SFC 22-A Page 53 hammer drill driver SFH 22-A Page 54 Accessories for drill drivers Page 57 Impact
THD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
Cordless Systems. Cordless Systems. Hilti. Outperform. Outlast.
Cordless Systems Hilti. Outperform. Outlast. 52 Introduction Introduction Page 54-55 Drill drivers Cordless compact drill driver SFC 22-A Page 56 Cordless hammer drill driver SFH 22-A Page 57 Accessories
Standard Street, El Segundo CA BRUSHLESS SERVO MOTORS
BRUSHLESS SERVO MOTORS To accommodate your complete servo system requirements, Glentek manufactures four complete series (GMB, GMBF, GMBM and GMBN) of high performance, permanent magnet brushless servo
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors Applications: Blue Max motors are used in variable frequency drive applications requiring full rated torque at zero speed, utilizing Closed- or Open-Loop
NOMENCLATURE WATER COOLED PACKAGE UNITS GENERAL DESCRIPTION. Cleanable Shell and Tube Condenser. Scroll Compressor(s)
NOMENCLATURE Product that perform By people who care 6 WCP S 640 B Q P Blank 50Hz 6 60Hz Blank P R22 R407c Water Cooled Packaged Blank Rotary S Scroll Compressor Model Code Blank Standard Q Special B Floor
TROTTER 3300 CLIMBER HOME GO BACK
GO BACK HOME TROTTER 3300 CLIMBER Part # Description BASE ASSEMBLY PARTS AF-12534 Base Frame Assembly FS-12457 Bracket, Power I/O Switch - L09-261102XXXX > FS-11750 Bracket, Filter Switch - < L09-261102XXXX
Fan Coil Dimensional Data. ultimate fan coil system
Fan Coil Dimensional Data ultimate fan coil system Overview In this literature we aim to provide dimensional data on the main Ability Fan Coil Ranges.. However, Matrix and EVO units are available in other
BACKWARD CURVED HIGH PRESSURE FANS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS BACKWARD CURVED HIH PRESSURE FANS MODEL BCS CATALOUE M400 DECEMBER 203 CENTRIFUAL FANS Model BCS Backward Curved - High Pressure The
ELIET SPARE PARTS MANUAL SUPER PROF 2000 OVERVIEW OF EXPLODE VIEW DRAWINGS DRAWING DESCRIPTION DRAW. REF. MODIFIED
ELIET SPARE PARTS MANUAL SUPER PROF 2000 OVERVIEW OF EXPLODE VIEW DRAWINGS DRAWING DESCRIPTION DRAW. REF. MODIFIED 1 EXPLODED VIEW DRAWING 1 MACHINE LEFT SIDE MMA 01 070 110-1 9-ott-2003 2 EXPLODED VIEW
INTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
CUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
PLEASE NOTE: This is a PRELIMINARY copy of the Carburetor Reference Manual.
PLEASE NOTE: This is a PRELIMINARY copy of the Carburetor Reference Manual. Carburetor Service Kits The carburetors for most current production engines are serviced with convenient kits, which include
Microwave Isolators and Circulators
Microwave Isolators and Circulators 24 HOUR SHIPPING ON IN-STOCK ITEMS Single Junction Octave/Broadband Frequency 1 Isolator Circulator Insertion Temperature Approx Range Model Model Isolation Loss Power
ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
Installation instructions. Cascade unit. For wall hung gas-fired condensing boiler GB162-50/65/80/ TD UK/IE (2014/09)
Installation instructions Cascade unit For wall hung gas-fired condensing boiler GB162-50/65/80/100 6 720 648 720-000.1TD UK/IE 6720813173 (2014/09) Product overview Product overview 9 1 7 A2 5 A1 B2 B1
light blue (LB) " white (W) off white (OW) light grey (LG) mid grey (MG)
BIRDCAGE S The elegant Birdcage pendant is part of Luxxbox s decorative pendant series made from acoustically rated panels. Adding a decorative touch to open plan collaborative spaces, the Birdcage is
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 4000 Compact Series Standard, Wheel, and Bearingless Hydraulic Motors We Manufacture 11-01-113 EN-0400 Solutions
BC, BCF, BFF, BWF & BHF. Chokes
BC, BCF, BFF, BWF & BHF Chokes 2 AOP 2/2012-SWP-D BR-AOP-BC/BCF/BFF/BWF/BHF-CHOKES-01 CAMERON TECHNOLOGIES: AOP CHOKES AOP chokes are general purpose chokes suitable for a host of applications within the
685 / 900T Treadmill K01-T01
GO BACK HOME Prices updated 685 / 900T Treadmill K01-T01 10/03/08 PART # DESCRIPTION Qty. Price BELTS BD-17026 Belt, Running 20.75x127.50 1 $440.00 BD-10983 Belt, Drive, Poly - V 320J10 1 $50.00 CABLES
Turning Air Into Solutions. BACKWARD CURVED HIGH PRESSURE FANS MODEL BCS
Turning Air Into Solutions. BACKWARD CURVED HIH PRESSURE FANS MODEL BCS CATALOUE M400 December 203 CentrifugalFans Model BCS Backward Curved - High Pressure The BCS fan from Twin City Fan & Blower is a
Rigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
100 to 400 MPa Series
100 to 400 Series 100 Pumps 202 Accessories 203 200 Single-Acting Cylinders 204 Double-Acting Cylinders 205 Manual Pumps 206 SMP-200 207 Electric Pumps 208 Special Pumps 209 Valves 210 to 212 Pressure
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
Type 550C 105 C High Ripple, Inverter Grade, Aluminum Ultra-Ripple, Long Life Screw Terminal Type
click here to see hardware and mounting options Specifications Temperature Range 4 C to +5 C Rated Voltage Range 2 Vdc to 5 Vdc Capacitance Range 68 µf to 35, µf Capacitance Tolerance % +5% Type 55C is
Lankelec. RQG1- Plastic straight connector. RQG1-GM 1.5/2.0 Thread acc. to GB/T GB/T Note: delivery time please on request
RQG1- Plastic straight connector ynamic: -20 ~+80, short term:100 IP67 with suitable o-ring sealing RAL7001 silver RQG1-GM 1.5/2.0 Thread acc. to GB/T192-2003 GB/T196-2003 Thread Size Tubing outer Ø f
Overhaul and repair procedures for the following Standard Cast Cylinder Stud Assemblies and Cylinder Valve Assemblies:
Technical Aspects are FAA Approved Number: L00-13 C Replace L00-13 B Date: 04/29/2005 Subject: Overhaul and repair procedures for the following Standard Cast Cylinder Stud Assemblies and Cylinder Valve
Parts List, Charging Chart, Wiring Diagrams
Parts List, Charging Chart, Wiring Diagrams PHN5 24-60 SERIES 1 Phase R-410A PACKAGE HEAT PUMP UNITS TABLE OF CONTENTS PARTS LIST 2-5 PARTS DRAWING 6-17 CHARGING CHART 18 WIRING DIAGRAMS 19-21 Printed
ECM-MSPD. Installation, Operation, and Maintenance Manual
ECM-MSPD Installation, Operation, and Maintenance Manual READ AND SAVE THESE INSTRUCTIONS The purpose of this manual is to aid in the proper installation and operation of fans manufactured by S&P. These
MILL SPOUTING & BLOWLINE EQUIPMENT - INDEX
MILL SPOUTING & BLOWLINE EQUIPMENT - INDEX STAINLESS STEEL SPOUTING ON-SITE POWDER COATING Page Page 2 2 LIGHT DUTY SPOUTING Item Straight Pipe Universal Joint Cone (Symmetrical) Flange Piece Branch Pipe
Collet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
INSTALLATION INSTRUCTIONS CASCADE UNIT FOR WALL HUNG GAS-FIRED CONDENSING BOILER GB162-65/80/ TD UK/IE (2011/07)
INSTALLATION INSTRUCTIONS CASCADE UNIT FOR WALL HUNG GAS-FIRED CONDENSING BOILER GB162-65/80/100 6 720 648 720-000.1TD UK/IE 6 720 648 720 (2011/07) PRODUCT OVERVIEW Product overview 9 1 7 A2 5 A1 B2 B1
HS6 Carburetor Conversion Installation Instructions
HS6 Carburetor Conversion Installation Instructions For: TR6 PART # 370-847, 370-848, 370-489 440 Rutherford St. Goleta, CA 93117 1-800-667-7872 FAX 805-692-2525 www.mossmotors.com Tools required: Shop
S Series (103-) Highlights
S Series (-) Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet,
ABS Pipe metric system Plain PN10
S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16
1 of 2 8/31/2009 5:30 PM
1 of 2 8/31/2009 5:30 PM Assembly: (Show All) 42 HS-15706 SCREW,8-16X.50,PNHD 301 KAX-21473-1 PCA, 751T, DISPLAY BOARD, AMBER LED GERMAN 301 KAX-21473-2 PCA, 751T, DISPLAY BOARD, AMBER LED FRENCH 301 KAX-21473-3
For applications with high axial play. For applications with reduced mounting space
Fig. Example of use Use : Pitch circle diameter Suitable for encoders Page high axial play 8.000.4K00.0000 cylindrical pin Long spring element 0 mm A020, A02H 9080, 908 262 reduced mounting space 8.000.4J00.0000
Illustrated Parts: Model 739
Illustrated Parts: Model Power Safe BCS America LLC 00 N Lagoon Ave Portland, OR Revised -- www.bcsamerica.com Phone: 00--00 Fax: 00--0 Bumper / Accessories - ------- 0.00 0 00 SCREW, X 0 SCREW, HEX MX
S Series (103-) Highlights B-3. Description. Specifications
Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet, return and
EQUIPMENT DATA SHEET RO
NORMAL OPERATING PARAMETERS UNIT CONFIGURATION Operating Water Temperature 77 F # Passes 1 Min. Inlet Water Pressure 10 PSI # Stages 1 Maximum SDI < 3 Array 12 Maximum Turbidity < 1 NTU Hsg Size,Mat'l,psi,Mfr
FI 3009, FI 3009C & FI 3009D
Replacement Parts List 304-486 FI 3009, FI 3009C & FI 3009D SUPERSEDES: June 1, 2013 EFFECTIVE: December 31, 2018 REQUIRED DESCRIPTION FI 3009 FI 3009C FI 3009D BEARING FRAME J BEARING FRAME J BEARING
QUICK COUPLINGS C101 PLATED STEEL COUPLER C102 PLATED STEEL NIPPLE C101L PLATED STEEL COUPLER WITH LOCKING SLEEVE C102B BRASS NIPPLE
C100 couplings are compliant with the ISO-7421-B standard. They also interchange with the following Manufacturer's: Snaptite 72, Hansen HK, Parker 60, Faster HNV, & Areoquip FD45. Larger sleeves on this
P34AXL Series Parts List
Note: The first P34AXL low-side ammonia units were shipped in late 1997. The original control panel utilized Cutler-Hammer components, but was changed to Allen Bradley in mid 1999. Control Panel Components
MSI recommends regular inspection of equipment as part of normal maintenance.
DIXIE ENGINEERING SPECIFICATION 9-2014 MINIMUM WALL INSPECTION DATA Rev: V 12/20/2016 GENERAL MSI recommends regular inspection of equipment as part of normal maintenance. Wall thickness values in this
LTV VALVE APPLICATION INSTRUCTIONS FOR
LTV VALVE APPLICATION INSTRUCTIONS FOR LOW TEMPERATURE PROTECTION COPPER-FIN AND POWER-FIN MODELS CB 495/497-2066/2067; CH 401/402-2071/2072 AND PB 501-2000 List of kit components Kit Part No. Model No.
KF5600. HYUNDAI WIA Vertical Machining Center
HYUNDAI WIA Vertical Machining Center Technical Leader The Vertical Machining Center, designed by Hyundai WIA with years of expertise and the latest technology, maximizes productivity while maintaining
Disc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
PARTS LIST. Models P/N PS UT10868 BCS35. i3350b
PARTS LIST Models i0b UT BCS UT d0b UT, UT d0bc UT, UT, UT av UT, UT av w/cc UT, UT, UT, UT i0b UT ib UT d0b UT0 d0bc UT i0b UT av UT av w/cc UT, UT, UT Timberman cc " cc UT P/N PS 0 i0b... (cc) BCS...
Directional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
The distributor valve
The distributor valve Understanding the operation of a pneumatic brake, and in particular of the operating principles of the pneumatic control, relies on understanding the global operation of the main
Service Guide. High-Pressure Grease Pump. 100 psi (6.8 bar) High-Pressure Pump Model 7785 Series Specifications
Description Service Guide 7785-A5 7785-B5 7785-MA The major components of the pump models in the 7785 series consist of an air-operated motor and a pump tube. The air motor connects directly to the double-acting
5, 5-1/2 and 6 Hp models 122K02, 122K82, Description: Primer Bulb - Fits Quantum series
BRIGGS & STRATTON AARM80-31-036 PRIMER BULB Briggs, fits Quantum AARM80-31-037 Series 4, 5, 5.5, 6hp. Briggs Description: - Fits Quantum series 3-4128, 1/2, 3.75 and 4 Hp models. 10A902, 4178, 10A982,
SP1. Compact String Pot Voltage Divider Output SP1-25 SP1-50 SP SP1-50-3
SP Compact String Pot Voltage Divider Output Linear Position to 50 inches (70 mm) Rugged Polycarbonate Enclosure IP67 Optional Mounting Bracket & Optional Sensor Cover w/connector IN STOCK for Quick Delivery!.9