light blue (LB) " white (W) off white (OW) light grey (LG) mid grey (MG)

Remote Power Supplies * & Dimmers (Sold Separately): Electronic Low Voltage Dimming (ELV) 0-10 Volt Dimming (0-10V) Lutron

0.25" (0.64cm) Grip Jack Connector Field Adjustable with Grip Jack Connector Adjustable Max. 5 ft. 0.9" 0.35" (0.9cm) 0.9" 0.38" (0.95cm) Description: Cirrus Channel Suspension Wall Wash uses a wall wash

0.25" (0.64cm) Grip Jack Connector 2WDC WDC Lumen values are based on the 3000K LED test.

0.25" (0.64cm) Grip Jack Connector Field Adjustable with Grip Jack Connector Adjustable Max. 5 ft. Description: Cirrus Channel Suspension D1 features a direct flat lens with 100 degree beam spread. At

CIRRUS SUSPENSION WALL WASH WITH REMOTE POWER, END FEED

Adjustable Max. 5 ft. Description Cirrus Suspension Wall Wash with Remote 24VDC power supply (sold separately) is a linear LED fixture that offers a wall wash lens for a smooth and uniform beam spread.

NOVA suspension up and down, end feed with remote power supply

Shown without Louver Shown with White Louver Description Nova Suspension Up/Down is a linear LED lighting 2 circuit system that features both direct and indirect light. This contemporary system allows

DRD1 Surface Mount or Recessed LED Downlight General New Construction 4, 5, 6 Aperture

PRODUCT SPECIFICATIONS All-in-one LED luminaire for retrofit, remodel, and new construction Slim, drawn aluminum construction Easy, tool-less installation for 4, 5 or 6 recessed housings 750 lumens of

DRD5S. Surface Mount LED Downlight JA8. Retrofit Junction Box

Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Thinnest-in-class delivers the pure, smooth light and the elegant look of a high-end recessed downlight Extends just 0.6 inches below the ceiling

CIRRUS CEILING WALL WASH WITH REMOTE POWER

0.9" 0.9" CIRRUS CEILING WALL WASH (ACTUAL SIZE) CIRRUS CEILING WALL WASH LENS (ACTUAL SIZE) DESCRIPTION At 7.3 or 9.6 watts per foot, Cirrus Channel Wall Wash contains 85+ or 95+ CRI LEDs. Fixture mounts

NOVA SUSPENSION DOWNLIGHT WITH POWER - END FEED

Shown without Louver Description Nova Power Suspension Downlight with a 24VDC power supply in the canopy is a linear LED fixture that offers direct light in a clean, contemporary style. Nova is available

Lamp: 7WDC 27K WDC 30K DC 27K DC 30K

Made in the USA 12"- 144" 1.025" (2.6cm) (0.76cm) Cirrus Channel Wall Grazer features a lens that provides dramatic accent lighting to highlight textured surfaces. At 7 or 10.5 watts per foot, the 24 volt

Fahrenheit DRD3 Adjustable LED Downlight Fire and Sound-Rated New Construction 4, 5, 6 Aperture

PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Fire and sound-rated housing. Up to 20 minute fire rated L500 (floor-ceiling) & P500 (roof-ceiling) design. Die formed #24 gauge galvanized steel construction.

DRD5S Surface Mount LED Downlight General Retrofit Junction Box

PRODUCT SPECIFICATIONS Light Engine LED: Optimized LED array delivers smooth, uniform illumination with no visible fasteners or dark spots. LUMEN OUTPUT (POWER): 750 Im (9.0W), 1000 lm (12.0W). SHAPE:

DRD3 Adjustable Recessed LED Downlight General New Construction 4, 5, 6 Aperture

PRODUCT SPECIFICATIONS 360 directional aim with up to 40 adjustable tilt Maximum installation compatibility Twist & Lock feature for easy trim installation 750 & 000 lumen outputs 2700K, 3000K, 3500K,

DCD1 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture

PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved

TWIGGY T1, TUBULAR 1" LENS TUNABLE WHITE 24VDC SYSTEM, 90+CRI

TWIGGY T1, TUBULAR 1" LENS TUNABLE WHITE 24VDC SYSTEM, 90+CRI MADE IN THE USA 0.39" (.99cm) 1.4" (3.6cm) 4.6" (11.7cm) To Remote Power Supply 1" (2.5cm) 12" to 120" (30.5cm - 304.8cm) To Remote Power Supply

DCCX Apex Series Commercial LED Cylinder Surface, Cord, Stem, Wall Mount

PRODUCT SPECIFICATIONS Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise, targeted beam of low

DCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount. Product Code: Spec Sheet V

Project: Product Code: Type: Date: Spec Sheet V- 08.20.8 Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for

DCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount

Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 Apex Series delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise,

DCC2. LED Cylinder JA8. Surface, Cord, Stem, Wall Mount

Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 The cylinder s combination of precise illumination and refined aesthetics can take your designs to new heights Available in a range of form factors,

Track Light. LIFETIME: 50,000 hours at 70% lumen maintenance. PHOTOMETRIC TESTING: Tested in accordance to IESNA LM

PRODUCT SPECIFICATIONS Track Light LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 900 lm (16.6W). CRI: 90+. CCT: 2700K, 3000K, 3500K, 4000K. BINNING: Color variation within

DRD2 Recessed LED Downlight General Retrofit Junction Box

PRODUCT SPECIFICATIONS Light Engine LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (10.8W), 1000 lm (12.8W). COLOR QUALITY: 93+ CRI, 2-step SDCM. CCT OPTIONS: 2700K,

PIPELINE 1 SUSPENSION UP OR DOWN WITH POWER - END FEED

Patent Pending Diffused White Lens Description Pipeline 1 Suspension Up or Down with a 24VDC power supply in the canopy is a linear LED fixture with a clean and contemporary style. Pipeline 1 is available

DRD5S & SurfaceFrame. Surface Mount LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box

New Construction Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little

DCD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture

PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved

DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount

PRODUCT SPECIFICATIONS Surface, Cord, Stem or Wall mounting options Available in White, Black, Bronze, Brushed Aluminum or Custom Color finishes Decorative frosted trim available 750, 000, 500 or 2000

90+ CRI 95+ CRI 95+ CRI 95+ CRI 90+ CRI 95+ CRI

DESPTION 3 LED dedicated IC downlight with precision aiming and punchy, smooth beams SPECIFICATIONS Watts: 23W/14W Volts: 120-277 VAC : 90 or 95 Color consistency: 2-step binning LEDs Life: > 61,000 hours

DRD2 Recessed LED Downlight General New Construction Junction Box PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2" trade size knockouts (two side, two top) to allow straight conduit

DRD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture

PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved

DRD2 & SurfaceFrame. Shallow Recessed LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box

Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little as 2" of ceiling

OneFrame & DRD2X Apex Series Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box

PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V High performance Apex Series DRD2 Architectural-grade illumination produces up to 4000 candelas of focused light Precise,

DRDHNJ Recessed LED Downlight General New Construction Junction Box

PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2 trade size knockouts (two side, two top) to allow straight conduit

PD6 LED - Retrofit PD6RX10ED010 PD6RXCP10ED010 PD6RX15ED010 PD6RXCP15ED010 PD6RX20ED010 PD6RXCP20ED010 PD6RX30ED010 PD6RXCP30ED010

Guide PD6 LED Halo Commercial Information in this dimming guide related to the PD6 LED product famillies listed below. The PD6 LED series provides flicker-free dimming to at least 10% with many phase control

OneFrame & DRD4 Adjustable Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box

PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit

CSDP SQ 5W C 24 22K SN

Diffused White Lens Diffused White Lens with White Louver Diffused White Lens with Black Louver Description With the combination of clean, linear channels that create a geometric shape, the Cirrus MIYO

Lamp: K-2200K K-2200K

Ss5C Warm Dim Soft Strip 5W 24vdc high output, commercial grade (92+cri) LENGTH IN FEET TOTAL WATTAGE 1 5 2 10 3 15 4 20 5 24 6 29 7 34 8 39 9 44 10 48 11 53 12 58 13 63 14 68 15 72 16 77 17 82 18 87 19

Classic Frame & DRD2X Apex Series Recessed LED Downlight Commercial Remodel 6", 8" Aperture

PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-formed sheet metal. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs.

MXS Matrix Small BRO

DESIGNED & ASSEMBLED IN CANADA MXS Matrix Small BRO The Matrix family of recessed multiples throws powerful illumination to direct occupant focus. To aid in setting the scene, each lamp head rests in a

IHOLC4DR 4 Gravity LED Downlight Cylinder

IHOLC4DR 4 Gravity LED Downlight Cylinder ELECTRICAL DATA LED Light Engine Delivered Lumens * System Wattage ** M1 M2 L1 L2 L3 900lm @ 3000K / 82 CRI 1800lm @ 3000K / 82 CRI 2500lm @ 3000K / 82 CRI 3400lm

CIRRUS SUSPENSION WITH RECTANGULAR 1 LENS WITH REMOTE POWER, END FEED

Diffused Rectangular 1 Lens Description Cirrus R1 Suspension with Remote Power is a linear LED fixture that offers direct light in a clean, contemporary style. Cirrus R1 is available in various increments

OneFrame & DRD2 Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box

PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit runs. Approved for 8 (four in, four out) #12 AWG C. MOUNTING:

2 LED downlight. Discreet styling, bold performance. RABWEB.COM

2 LED downlight Discreet styling, bold performance. RABWEB.COM 888 722-1000 Clean, unobtrusive design delivers smooth and abundant light from an aperture just over 1 inch wide. 8W replaces 50W MR16 with

Installation Instructions MX LED Downlight Remodel

1 of 5 Risk of electrical shock. Disconnect power before servicing or installing luminaire. Risk of injury or damage. Luminaire will fail if not installed properly. Follow installation instructions. Risk

CIRRUS CEILING SQUARE 1 WITH REMOTE POWER

Diffused Square 1 (Actual Size) Description Cirrus Ceiling S1 is a linear LED fixture that offers direct light in a clean, contemporary style. Cirrus is available in various increments from 12" to 720"

OneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box

PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V Twist & Lock feature for easy trim installation 750 & 1000 lumen outputs, powered by Cree 93+ CRI LEDs 2700K, 3000K, 3500K,

DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount

PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LEDs enable excellent fixture to fixture color consistency and long lifetime. Delivers 93+ CRI in all available color temperatures.

DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount

PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 750 / 750 lm (.8W /.8W), 000 / 000

Aperture. Color Quality. 90+ CRI, 2-step SDCM. 2700K 3000K 3500K 4000K Spot (20 ) Narrow Flood (30 ) Flood (40 ) 4000cd (Spot 750 lm) Dimming

Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 With multiple ratings, OneFrame is compliant in a wide range of situations Thanks to a unique low profile and small aperture design, OneFrame can

DRD2 Recessed LED Downlight General Remodel 4", 5", 6" Aperture

PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Die-formed steel with powder coat finish (4" frame-in kit, 4" shallow frame-in kit), 20 ga. die-formed aluminum (5" frame-in kit), 22 ga. die-formed aluminum

OneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box

PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. DRDHNJD equipped with (8) trade size knockouts (four concentric side ( 3 /4" + 1 /2"), two

DCC2 LED Cylinder Surface, Cord, Stem, Wall Mount

PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 2 x 750 lm (23.6W), 2 x 000 lm (29.4W),

D4B-F-R 3 Series Round Frame In BRO

DESIGNED & ASSEMBLED IN CANADA D4B-F-R 3 Series Round Frame In BRO The D4B-F-R series is designed for non insulated ceilings. A unique design allows installation of very shallow plenums as low as 5" (when

Professional-grade LED downlights

Professional-grade LED downlights High end. Low profile. Affordable price. RABWEB.COM 888 722-000 LED NEW CONSTRUCTION 2W replaces 75W R30, 20W & 26W replace 00W PAR Up to 856 lumens/7 LPW Dimmable down

HALO. RL SeleCCTable Retrofit - LED Downlight Series. Dimming Guide and Step-down Transformer Application Note. colors. Phase Control Dimming

RL SeleCCTable Retrofit - LED Downlight Series Guide and Step-down Transformer Application Note HALO The RL SeleCCTable LED Series provides continuous dimming with reverse or forward phase cut dimmers.

MXG2PRD 3.5 MX G2 LED Downlight Pendant

MXG2PRD 3.5 MX G2 LED Downlight Pendant ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 10W 16W 20W 3000K / 82 CRI 3000K / 82 CRI 3000K / 82 CRI

CIRRUS SUSPENSION DOWNLIGHT WITH POWER, CENTER FEED

Diffused White Lens Description Cirrus Power Suspension Downlight is a linear LED fixture that offers direct light in a clean, contemporary style. Cirrus is available in various increments from 36" to

DRD2 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture

PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved

DRD2X & OneFrame Concrete Apex Series Recessed LED Downlight

DRD2X & OneFrame Concrete Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 Designed for high rise structures that require steel and concrete for reinforcement Features spot-welded areas and adaptations

HALO. LT Retrofit LED Downlight Series. Dimming Guide and Step-down Transformer Application Note. Phase Control Dimming

LT Retrofit LED Downlight Series Guide and Step-down Transformer Application Note HALO The LT LED Series provides continuous dimming with reverse or forward phase cut dimmers. LT4 LT460WH927 LT460WH930

95+ CRI 90+ CRI 95+ CRI. Product Watts Color Temp CRI Version Driver Optional. 3G 3rd Gen

DESPTION The Novation shallow downlight has a height of just -/ inches with an adjustable housing that utilizes a heat pipe module that can tilt up to and rotate a full. W Output Performance Color Temperature

MXS Trimless Matrix Small XTM

MXS Trimless Matrix Small XTM FEATURES A DETAILS Trim Class: 4" Category: Recessed Trimless Multiple Shape: Rectangle Adjustability: Aiming WIth Rotation MXS-Trimless-Matrix-Small-XTM-Specs Subject to

PROJECT INFORMATION PROJECT

SURFACE PROJECT INFORMATION PROJECT SURFACE DATE TYPE NanoLED Cylinder - Available in 2 wattage/lumen packages with maximum delivered lumens of over 1100 at 20W (57LPW). The NanoLED cylinder provides maximum

HALO. SLD - Surface LED Downlight Series Dimming Guide and Step-down Transformer Application Note. Phase Control 120V Dimming

SLD - Surface LED Downlight Dimming Guide and Step-down Transformer Application Note HALO The SLD LED provides continuous dimming with reverse or forward phase cut dimmers; as low as 5% depending upon

The RSQ LED Series provides continuous dimming with reverse or forward phase cut dimmers.

RSQ All-Purpose Square Lens LED Modules Dimming Guide and Step-down Transformer Application Note HALO The RSQ LED Series provides continuous dimming with reverse or forward phase cut dimmers. RSQ4 RSQ5

FLUSH MOUNT DISK LIGHT

7 www.lum-techlighting.com FLUSH MOUNT & DISK LIGHT CMED-605 DoB 5 Ceiling Puck CMED-607 DoB 7 Ceiling Puck [CMED-605 : 5 ] (5.5"dia. x 1") Ceiling Puck Ceiling Flush Mount [ CMED-607 : 7 ] (7"dia. x 1")

UCEL24IN30K90 24" Led Uc 30K 90CRI WHT

3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Lamp Included Lamp Type Material pallet

MOUNTING: Swing out lugs permit from below mounting into ceiling up to 1 1/2 (38 mm) thick LABELING: Approved to UL standards as tested by CSA

2LT APPLICATION: Accent and display lighting for retail, commercial and supermarket environments CONSTRUCTION: Steel driver housing Steel upper housing and laser cut trim ring Complete die-cast optical

MOUNTING: Swing out lugs permit from below mounting into ceiling up to 1 1/2 (38 mm) thick LABELING: Approved to UL standards as tested by CSA

MULTIPLE RECESSED REMODELER 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and supermarket environments CONSTRUCTION: Steel driver housing Steel upper housing and laser cut

Catalog Number. Notes

. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the

3 1 4" x 3 1 4" 4 1 2" x 4 1 2" HEATSINK: Proprietary high performance aluminum die cast heatsink for maximum LED life.

Beve Trimless Downlight PRODUCT INNOVATION AWARDS 211 PLATINUM WINNER MOST UNIQUE PRODUCT WINNER 331 1" Regress LUMINAIRE INFORMATION APPLICATION: Accent luminaire for Residential, Commercial, Retail or

Architectural grade at an affordable price. 3 DOWNLIGHTS NDLED RABWEB.COM

Architectural grade at an affordable price. NDLED DOWNLIGHTS RABWEB.COM 888-722-1000 3-in-1 housing. One-of-a-kind downlight. The NDLED housing delivers innovative design flexibility. Now you can install

GLASS ACT SINGLE RPD14 SUSPENDED, WALL, SURFACE

GLASS ACT SINGLE RPD14 STANDARD SIZES Ceiling, Suspended Pendant, or Single/Double-Sided Wall Mount Luminaire LAMPING LED - 90+ CRI - 2700K/3000K/3500K/4000K Output: 500lm (at 83 lm/w) per luminaire Dimming

130 130 Simple elegant designs in the Edge Lighting ceiling collection easily adapt to any decor. The fixtures with indoor/outdoor and ceiling/wall options, provide multitask lighting for various applications.

Mini Cavaletto. Recessed Adjustable Wall Wash

Recessed Adjustable Wall Wash Features The Mini Cavaletto LED is a compact, recessed adjustable wall wash luminaire for commercial and retail environments. The high-performance optical head with various

The HLB SeleCCTable LED Series provides continuous dimming with reverse or forward phase cut dimmers.

HLB SeleCCTable Ultra-thin Downlight Dimming Guide and Step-down Transformer Application Note HALO The HLB SeleCCTable LED Series provides continuous dimming with reverse or forward phase cut dimmers.

Dimmer Compatibility Report

G1 Downlights Manufacturer and Dimmer Model # 4 Downlight LUTRON DIMMERS: RRD-10ND, SZ-6ND, HW-RPM-4A-120, HxD-6ND, QSG-6P, LP-RPM-4A-120, PHPM-WBX, S-600PR-WH, DV-600PR-WH, TG-600PR-WH, AY600P, Q600P,

40º 14 1 / Plaster Frame 6. Plaster Skim Coat (by others) ORDERING INFORMATION:

RECESSED TRIMLESS MULTIPLE 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and hospitality environments CONSTRUCTION: Stamped steel mounting frame w/integral mounting bars Steel

TJT120023ACxxxB TJT120023ACxxxC

0V LED DirectAC Engine and Retrofit Kits Suitable for open or fully enclosed luminaires Full CCT Option Available (Standard CCT s: 700K,3000K,4000K) Suitable for luminaires with plastic and glass lenses

Maxline Profile System - Suspension

DIRECT 5 7/8 150mm 6 1/4 158mm L3ML-SUS-SYS DR Article # Distribution Diffuser Length Angle Voltage Linear Spot Electrical Power Suspension Finishes Couplers Feed Cable x / / Accessories Product Distribution

Type: Project : Luminaire characteristics: Source: Lumen maintenance: Optics: Material: Mounting: Electrical: Dimming: Finish: Weight: Warranty:

Page: 1 of 5 Adjustable ceiling recessed luminaire with Opti Beam technology reflector, ensuring high luminous efficiency and uniform distribution, for a high visual comfort. Ideal for retail and architectural

MODA COVE INTERIOR PRODUCT GUIDE. Client: Project Name: MODA Contact: Quantity: Type: PO#: Notes:

MODA COVE INTERIOR PRODUCT GUIDE Client: Project Name: MODA Contact: E-Mail: Type: Notes: PO#: Quantity: Specification Grade Premium Interior Cove Fixture. MODA COVE Interior is a new patent pending cove

Catalog Number. Notes

. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the

Mini Cavaletto. Recessed Adjustable Wall Wash

Recessed Adjustable Wall Wash Features The Mini Cavaletto LED is a compact, recessed adjustable wall wash luminaire for commercial and retail environments. The high-performance optical head with various

Dimmer Compatibility Report

G1 Downlights Manufacturer and Dimmer Model # 4 Downlight LUTRON DIMMERS: RRD-10ND, SZ-6ND, HW-RPM-4A-120, HxD-6ND, QSG-6P, LP-RPM-4A-120, PHPM-WBX, S-600PR-WH, DV-600PR-WH, TG-600PR-WH, AY600P, Q600P,

Catalog Number. Notes

Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light

totem tala Totem I - With its distinctive tubular shape and gentle lumen output, the Totem I makes the perfect bulb for desk lamps and reading lights.

totem tala Totem I - With its distinctive tubular shape and gentle lumen output, the Totem I makes the perfect bulb for desk lamps and reading lights. Totem III - Long and lean, the Totem III is designed

1 1 / 4 13 / 16 45º ORDERING INFORMATION: 0-10V v dimming CP - Chicago plenum EM** - emergency battery pack (1 head)

SEMI-RECESSED TRIMLESS MULTIPLE 3 LIGHT 3LT APPLICATION: Accent and display lighting for retail, commercial and hospitality environments CONSTRUCTION: Stamped steel mounting frame with integral mounting

MODA GRAZE INTERIOR PRODUCT GUIDE. Client: Project Name: MODA Contact: Quantity: Type: PO#: Notes:

MODA GRAZE INTERIOR PRODUCT GUIDE Client: Project Name: MODA Contact: E-Mail: Type: Notes: PO#: Quantity: Specification Grade Premium Interior Graze Fixture. MODA GRAZE Interior is a new patent pending

TJT120034ACxxxB TJT120034ACxxxC 120V LED DirectAC Engine and Retrofit Kits

0V LED DirectAC Engine and Retrofit Kits Suitable for open or fully enclosed luminaires Full CCT Option Available (Standard CCT s: 700K,3000K,4000K) Suitable for luminaires with plastic and glass lenses

TJT120015ACxxxB TJT120015ACxxxC 120V LED DirectAC Engine and Retrofit Kits

0V LED DirectAC Engine and Retrofit Kits Suitable for open or fully enclosed luminaires Full CCT Option Available (Standard CCT s: 700K,3000K,4000K) Suitable for luminaires with plastic and glass lenses

Model Location Dimming Location Output CRI * C.C.T. Reflector Shell Color Suspension Options Q4LP

QUBE 4 LX PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 5 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1

STUDIO. Luminaire characteristics: Power input: 12.5W to 49W Lumens: 1300 to 4600lm (for 3000K, 80CRI) Luminaire efficacy: Up to 107lm/W.

Page: 1 of 6 Collection of pendants luminaire for commercial and institutional applications. Canopy mounted, with complete range of optical accessories, Studio is a flexible solution for general lighting

Promenade TM Series LED PRMD

FEATURES Reliable, uniform, glare free illumination Types II, III, IV, V and custom distributions 1 3000K, 4000K, 5000K CCT 0-10V dimming ready Integral surge suppression Life thermal protection 13 standard

Recommended Dimmers for Cree A19 (40/60W), BR30 (65W) and PAR30 LED bulbs.

Recommended Dimmers for Cree A19 (40/60W), BR30 (65W) and PAR30 LED bulbs. Compatible s and smooth dimg to dimg level may Ace - 3247939 Incandescent Leading 600 1 7 Legrand WideSlide 90680 Incandescent

Luminaire characteristics: Source: Lumen maintenance: Optics: Material: Mounting: Electrical: Dimming: Finish: Weight: Warranty: Ratings:

Page: 1 of 6 Collection of pendants luminaire for commercial and institutional applications. Canopy mounted, with complete range of optical accessories, Studio is a flexible solution for general lighting

MODA GRAZE EXTERIOR PRODUCT GUIDE. Client: Project Name: MODA Contact: Quantity: Type: PO#: Notes:

MODA GRAZE EXTERIOR PRODUCT GUIDE Client: Project Name: MODA Contact: E-Mail: Type: Notes: PO#: Quantity: Specification Grade Premium Exterior Graze Fixture. MODA GRAZE Exterior is a new patent pending

Tove. High Performance Linear System Suspension

The Tove family of luminaires offers unmatched performance, design flexibility, simplified installation and superior quality. The family of luminaires includes pendants, surface mounted, wall mounted,

NOVENTA NV3.5 SUSPENDED, WALL, SURFACE, RECESSED. STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections

NOVENTA NV3.5 SUSPENDED,, SURFACE, RECESSED STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections LAMPING LED - Direct or Indirect - 80/90 CRI - 3000K/3500K/4000K

RIM 72" RIM 24" File Name: RIM-ROUND-PENDANT-SPEC Page: 1 / 9

DESCRIPTION Rim Round combines generous ambient illumination with elegant geometry. The 2" high extruded aluminum frame is formed and finished into a seamless ring that can be painted in a wide range of

Standards: UL & CUL Listed.

3.5" Tesla LED Downlight Trim Fixture Type: 54" Catalog Number: 32" 54" Product Description Minimum profile, round downlight trim with interior open reflector. For use with HR-3LED series housings. Features

MODO. Duomo, large. pendant PROJECT SPECIFICATIONS ORDERING LOGIC. Job. Notes. Type. Part #

PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato X LED module - up to 4 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1 CRI (Ra) 83

IN.VOLA SUSPENDED LUMINAIRES

IN.VOLA SUSPENDED LUMINAIRES The decorative suspended luminaire IN.VOLA attracts attention to itself already from far off and supports high-quality shop design. Two glass shade shapes, a spherical and