High-Temperature Accelerometers PIEZOELECTRIC SENSORS FOR DYNAMIC MEASUREMENTS
|
|
|
- Lindsay Rich
- 6 years ago
- Views:
Transcription
1 s PIEZOELECTRIC SENSORS FOR DYNAMIC MEASUREMENTS
2 s 3311A 3133A2 3030B5H 3023AH Miniature Triaxial Miniature/ESS Ultra Miniature Triaxial Miniature Through-Hole +320 F (+160 C) operation Lightweight HALT / HASS Robust design Noise Vibration Harshness (NVH) 3 grams Single cable 4-pin connector Small footprint High-temperature vibration measurements Excellent temperature stability +325 F (+163 C) operation Industry standard for ESS (control) Small size HALT / HASS 7 grams Robust design Vibration control Excellent temperature stability mounting stud +300 F (+149 C) operation Minimal mass loading effects 2 to 5 mv/g Ultra low-profile 0.8 grams Ultra lightweight Integral cable Light and flexible integral cable Mechanical shock testing vibration measurements across three orthogonal axes where space is at a premium +325 F (+163 C) operation Miniature design Aircraft 50 mv/g 360 connector orientation Automotive applications 2.5 grams Excellent temperature stability 5-44 connector Extended frequency response Through-hole mount vibration measurements (2-56 thread mounting screw)
3 s 3218C 3088C/3092C A2 Ultra Miniature Teardrop Vibration Measurement System Charge Mode s Vibration Measurement System +300 F (+149 C) operation Minimal mass loading effects 2 to 5 mv/g Ultra low-profile 0.2 grams Ultra lightweight Integral cable Lightweight and flexible General purpose vibration where integral cable space is at a premium High natural frequency Mechanical shock testing +900 F (+482 C) operation Integral hardline cable for ultra Aircraft turbine vibration high-temperature operation measurements (others upon request) 150 grams Case isolated Easily powered by data acquisition systems Low-profile Industrial turbine vibration measurements Ultra high-temperature general purpose vibration measurements +600 F (+316 C) operation (3088C) No internal electronics required Automotive engine / exhaust analysis +900 F (+482 C) operation (3092C) Increased Mean Time Turbine engine 10 pc/g (3088C) Before Failure (MTBF) 3.5 pc/g (3092C) Self-generating device 42 grams mounting hole +900 F (+482 C) operation Differential output Turbine engine 1.6 pc/g D38999 output connector 157 grams Integral hardline cable
4 s 3316C 3235C 3225E 3221C Through-Hole Charge Mode Miniature Teardrop Differential s Ultra-Miniature +500 F (+260 C) operation Miniature design Engine 10 pc/g 360 connector orientation 11 grams High charge output Automotive testing Extended frequency response General purpose vibration measurements Through-hole mount (#6 screw) Low transverse sensitivity +350 F (+177 C) operation Miniature design 1.6 pc/g Minimal mass loading effects Mechanical shock testing 0.6 grams Lightweight Removable cable (also available with integral cable) design available vibration measurements where space (with connector) is at a premium +500 F (+260 C) operation Low-noise operation in differential mode Available sensitivities of 50, 100 and 200 pc/g 55 grams 2-pin connector Inconel construction Continuous high-temperature operation Balanced differential output High charge sensitivity High-temperature turbine engine vibration measurements High-temperature industrial monitoring +900 F (+482 C) operation Mates with Dytran 6894A Exhaust system analysis 1 pc/g hardline cable assembly Engine analysis 5.7 grams High resonant frequency Small size 5-40 mounting hole Inconel construction
5 s 6013A 3323C 3310A 3309A Differential Through-Hole Miniature Teardrop Isolated Triaxial Cable Assemblies +500 F (+260 C) operation Differential output Aircraft 5 pc/g 360 connector orientation Engine 38 grams Excellent temperature stability High-performance engine analysis Mighty Mouse 3-pin connector Low-profile (800 series) High electrical isolation Through-hole mount (#8 screw) Case isolated +500 F (+260 C) operation Miniature design 1 pc/g Minimal mass loading effects Mechanical shock testing 1 gram Lightweight Removable cable Electrical isolation vibration High natural frequency measurements where space is at a premium +500 F (+260 C) operation Triaxial design Industrial -15 pc/g High charge output Automotive vibration measurements 60 grams Small footprint (3) s triaxial 2-bolt mount FEATURES: to Standard and custom lengths available 6894A FEATURES: For use up to +900 F (+482 C) to Standard and custom lengths available Low-Noise Cable Assembly Hardline Cable Assembly
VIBRATION SENSORS VIBRATION SENSORS
VIBRATION SENSORS TE has spent more than 20 years designing and manufacturing s based on our proprietary Microelectromechanical System (MEMS), bonded gage and piezoelectric ceramic/film technologies. Voltage
Aviation and Aerospace
Aviation and Aerospace Acceleration Measurement Source: Swiss International Air Lines Accelerometers and Force Sensor Solutions Aviation and Aerospace Acceleration Measurement Accelerometers are commonly
Railway vibration measurement. Enhance safety and cut maintenance costs
Enhance safety and cut maintenance costs Railway vibration measurement Vibration sensors for the design, commissioning and monitoring of trains, tramways and subways High-speed trains under test at China's
Industrial Monitoring Instrumentation
IMI Sensors - A PCB Piezotronics Division Industrial Monitoring Instrumentation Predictive Maintenance Energy & Power Generation Process Monitoring & Protection LIFETIME WARRANTY Products Guaranteed for
The Piezoresistive Pressure Transducer
Kistler s core competence is the development, production and use of sensors for measuring pressure, force, torque and acceleration. Kistler s know-how and electronic systems can be used to prepare measuring
Proximity Transducers, Seismic Sensors and Accessories
ProvibTech s Case Mount Sensors Selection Guide Model Number Sensitivity TM0782A TM0783A TM0786A General Purpose Accelerometer TM0784B TM0793V TM079VD Low Power Accelerometer Velocity Transducer 100 mv/g
Sensor Mounting MACHINERY MONITORING. Mounting Configurations. Temporary Mounting
Sensor Mounting When using Piezoelectric sensors to measure vibration, the sensor must directly contact the machine surface. The more intimate and stiff the contact between sensor and the machine, the
Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE
Brüel & Kjær and LDS The Perfect Match SHORT FORM CATALOGUE 4 Aerospace For any aircraft, helicopter, space vehicle or ballistic device, reliability is the number one priority. By using our vibration test
Sensors for Road Load Measurements Accelerometers, Pressure Sensors, Force Sensors, Strain Sensors, Load Cells, and Signal Conditioners
WWW.PCB.COM Sensors for Road Load Measurements Accelerometers, Pressure Sensors, Force Sensors, Strain Sensors, Load Cells, and Signal Conditioners Automotive Sensors Division Toll-Free in USA 888-684-0014
Mounting hardware and accessories
Mounting hardware and accessories Mounting considerations Surface Wilcoxon s rugged sensors are designed to operate continuously in harsh industrial environments. Consideration of mounting surface and
Caution. Description. Specifications and Ordering Information and Accelerometers
R Specifications and Ordering Information 200350 and Accelerometers Description The 200350 and Accelerometers are general purpose, case-mounted seismic transducers designed for use with Trendmaster Pro
and Accelerometers Bently Nevada* Asset Condition Monitoring
200350 and 200355 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 200350 and 200355 Accelerometers are general purpose, casemounted seismic transducers designed for use with Trendmaster*
To put integrity before opportunity To be passionate and persistent To encourage individuals to rise to the occasion
SignalQuest, based in New Hampshire, USA, designs and manufactures electronic sensors that measure tilt angle, acceleration, shock, vibration and movement as well as application specific inertial measurement
RING & BUSHING MOUNTS
RING & BUSHING MOUNTS Ring and bushing isolators are versatile, low cost mounts that can satisfy many vibration control problems. They are rugged, low-cost isolators easily installed. Ring and bushing
and Accelerometers
200350 and 200355 Accelerometers Product Datasheet Bently Nevada* Asset Condition Monitoring Description The 200350 and 200355 Accelerometers are general purpose, casemounted seismic transducers designed
Air Bearing Shaker for Precision Calibration of Accelerometers
Air Bearing Shaker for Precision Calibration of Accelerometers NOMENCLATURE Jeffrey Dosch PCB Piezotronics 3425 Walden Avenue, Depew NY DUT Device Under Test S B DUT sensitivity to magnetic field [(m/sec
Toll Free: 877/ Fax: 814/
Low Profile Avionics Mounts (AM ) Low profile, all-direction vibration and shock mounts for avionics equipment and other sensitive devices Lord Corporation low profile Avionics Mounts (AM ) set the standard
Miniature Aerial Vehicle. Lecture 4: MEMS. Design Build & Fly MIT Lecture 4 MEMS. IIT Bombay
Lecture 4 MEMS MEMS Micro Electrical Mechanical Systems Practice of making and combining miniaturized mechanical and electrical components Micromachines in Japan Microsystems Technology in Europe MEMS
200150, & Accelerometers Bently Nevada* Asset Condition Monitoring
200150, 200155 & 200157 Accelerometers Bently Nevada* Asset Condition Monitoring Description The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for
Looking ahead into the future of turbocharging. Knowledge Library. borgwarner.com
Looking ahead into the future of turbocharging Knowledge Library borgwarner.com Knowledge Library Looking ahead into the future of turbocharging Turbocharging system manufacturers are steadily increasing
Mil-COTS, Hi-Rel Power Conversion & Battery Management Products
Mil-COTS, Hi-Rel Power Conversion & Battery Management Products High Reliability Power About Power-One Power-One is a leading global manufacturer of power conversion and power management solutions, with
Pressure Sensors for Test and Measurement. For Precise Pressure Measurement in Static and Dynamic Applications
Pressure Sensors for Test and Measurement For Precise Pressure Measurement in Static and Dynamic Applications Piezoelectric Pressure Quartz and PiezoStar crystals are the heart of Kistler piezoelectric
TE CONNECTIVITY SENSORS /// WIND TURBINES SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY
TE CONNECTIVITY SENSORS /// WIND TURBINES SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY SENSOR SOLUTIONS FOR WIND TURBINES FROM TE CONNECTIVITY TE Connectivity (TE) is a global designer and manufacturer
TOTAL CUSTOMER SATISFACTION GUARANTEED
SFC-2 SHORT FORM CATALOG Including TOTAL CUSTOMER SATISFACTION GUARANTEED PCB Piezotronics, Inc. guarantees Total Customer Satisfaction. If, at any time, for any reason, you are not completely satisfied
1. PRODUCT INFO 2. WIRING DIAGRAM 3. CONTROL & POWER INPUTS: MAIN FEATURES:
1. PRODUCT INFO Developed originally at the request of the world's leading UAV manufacturers, all of which now utilize Aveo lighting, the MiniMax is a compact powerhouse of hemispheric light. Available
Accelerometer Mounting Considerations
Accelerometer Mounting Considerations An accelerometer is an instrument that senses the motion of a surface to which it is attached, producing an electrical output signal precisely analogous to that motion.
pressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
Linear potentiometers
Linear potentiometers Proud to be part of the team CLS1300 slim bodied range These high performance, high temperature linear potentiometers are designed for the most demanding control and measurement applications.
FUEL FLOW SENSOR INSTALLATION GUIDE
Table of content FUEL FLOW SENSOR INSTALLATION GUIDE Revision 1 1 Features... 1 2 Installation... 2 2.1 Overview... 2 2.2 Fuel compatibility... 2 2.3 Ranging jet... 3 2.4 Flow direction... 4 2.5 Location...
CLEVITE ELASTOMERS Commercial & Specialty Vehicle Applications
ELASTOMERS CLEVITE ELASTOMERS Commercial & Specialty Vehicle Applications Commercial vehicle elastomer technology, accelerated SM CLEVITE Elastomers Forward thinking. Forward moving. Where transportation
Adhesive mounting base. Mounting method Accessory Type Advantages Disadvantages Remarks. Allows stud mounting, provides electrical isolation
ccessories Mounting accessories For acceleration sensors Type 84... 85... The most important consideration when installing an accelerometer on a test structure is to have a quality mounting surface for
MODEL 205 ce VIBRATION METER
OPERATION MANUAL VIBRATION METER (INCLUDES MODEL 205M ce) Page 2 TABLE OF CONTENTS SECTION TITLE PAGE 1. INTRODUCTION 3 Description 3 2. FEATURES 4 Batteries 4 Controls 4 Vibration Pickup 4 3. OPERATION
Acceleration Sensor AS - 030
Acceleration Sensor AS - 030 1 Application The acceleration sensor AS-030 is used for measurement of vibration acceleration. 12 38 ø21,6 SW 22 M8; 6mm deep AS030-1 (020201) 2 Measuring Principle Acceleration
Adhesive mounting base. Mounting Method Accessory Type Advantages Disadvantages Remarks. Allows stud mounting, provides electrical isolation
ccessories Mounting ccessories for cceleration Sensors Type 84... 85... The most important consideration when installing an accelerometer on a test structure is to have a quality mounting surface for attachment.
DC/DC converter SINGLE OUTPUT
DC/DC converter SINGLE OUTPUT SOPHISTICATED DC/DC TOPOLOGY! η = 94%!! DC/DC high efficiency module Wide Input range Various output voltages High output current High efficiency up to 94% Approved: UL60950,
Omni Series Motors. Applimotion Motors & Actuators TORQUE. Low-Profile Direct Drive Motors for the World s Machines and Robots PRODUCT DATA SHEET
TORQUE Motors & Actuators PRODUCT DATA SHEET Omni Series Motors Low-Profile Direct Drive Motors for the World s Machines and Robots The Omni Series enables OEMs to design high performance, reliable, small
WHY CHOOSE SERVOTEST? The knowledge and experience to design and build completely unique test equipment for the most demanding applications.
Servotest has gained international recognition as a World leader in servohydraulic test and motion simulation. The Company offers advanced, sometimes highly customised, servohydraulic systems backed by
SMAC ISOLATORS CATALOGUE
SMAC ISOLATORS CATALOGUE Building together future solutions Indice F Overview SMAC is a dynamic company specializing in the analysis, design and manufacturing of complex rubber parts for demanding fields
Javelin Series Motors
IRONLESS Applimotion Motors & Actuators PRODUCT DATA SHEET Javelin Series Motors Low-Profile Linear Motors for the World s Machines and Robots The Javelin Series enables OEMs to design high performance,
Model C2023J5003A00. Ultra Low Profile db, 90 Hybrid Coupler
Model C223J53A Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C223J53A is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It is
Modul-System SMART AND VERSATILE MULTI-BOX
Modul-System SMART AND VERSATILE MULTI-BOX The Smart Multi-Purpose Tool Box Robust and ergonomic tool and storage box Easy to transport and take to any place of work Attractive design and smart functionality
Trends in Automotive MEMS. Dr. Jan Peter Stadler Senior Vice President Engineering, Robert Bosch GmbH
Dr. Jan Peter Stadler Senior Vice President Engineering, Robert Bosch GmbH Agenda Market Overview Trends Higher Penetration Rates Miniaturization CE goes Automotive New Applications Summary 3 Market Size
LaserTurn 1. Laser Machining System. Highly integrated linear/rotary motion platform
LaserTurn 1 Laser Machining System Highly integrated linear/rotary motion platform Pneumatically-actuated collet closer supports 0.1 mm to 7.9 mm O.D. materials with frictionless rotary union Clear aperture
Proximity Transmitters, and Seismic Vibration Transmitters
TM016 Velocity/ Acceleration Vibration Transmitter Introduction The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The
Sidewall Couplers 3dB W/G Size
SIDEWALL COUPLERS Sidewall Couplers 3dB WR22 43.5-45.5 1A 22HS12.440.648.280.040.040 WR28 26.5-29.5 1A 28HS42.550.77.30.040.040 26.0-30.0 27.5-31.2 1A 28HSA22.550.77.30.040.040 30.0-34.0 1A 28HS52.550.76.30.040.040
EXTRUDED HEAT SINKS FOR POWER SEMICONDUCTORS
EXTRUDED HEAT SINS FOR POWER S 621 AND 623 Low-Profile for All Metal-Case Power Semiconductors Footprint Thermal Performance at Typical Load Standard Dimensions Height Mounting Natural Forced Weight P/N
Positioning Systems. Linear Motor Stages Product Overview. LMX1E-C Page 14. LMX1L-S Page 19.
8 inear Motor Stages 2.1 Product Overview MX1E-C Page 14 Complete linear stage with coreless motor, type MC Excellent for applications with a high degree of synchronous operation requirements Also for
WHITE PAPER. Flow Induced Noise Reduction Techniques for Microphones in Low Speed Wind Tunnels
Flow Induced Noise Reduction Techniques for Microphones in Low Speed Wind Tunnels Andrew R. Barnard, Ph.D., INCE Bd. Cert. Assistant Professor, Mechanical Engineering Engineering Mechanics Michigan Technological
A Micro Power Generation System with Gas Turbine Engine and Piezo Converter -- Modeling, Fabrication and Characterization --
A Micro Power Generation System with Gas Turbine Engine and Piezo Converter -- Modeling, Fabrication and Characterization -- X.C. Shan *1, Z.F. Wang 1, Y.F. Jin 1, C.K. Wong 1, J. Hua 2, M. Wu 2, F. Lu
MASTERVOLT PRICE LIST
MASTERVOLT PRICE LIST September 2017 USAGE OF THIS PRICE LIST Validity This price list is intended for business to business use only. All prices are in Euro ex. VAT and are valid from 1 September 2017.
MECHATRONICS LAB MANUAL
MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and
Creative Links to World Electronics
Interconnect Solutions for Lighting Creative Links to World Electronics Hirose Wire-to-Board Connectors Hirose s interconnect products offer innovation, versatility and low profiles for your LED engineered
3M Automotive Acoustic Solutions. 3M All Rights Reserved.
3M Automotive Acoustic Solutions GO 3M 2012. All Rights Reserved. 3M Automotive Acoustic Solutions Absorption Solutions Damping Solutions Sealing Solutions Isolation Solutions Buzz, Squeak and Rattle Solutions
Adhesive mounting base. Mounting Method Accessory Type Advantages Disadvantages Remarks. Allows stud mounting, provides electrical isolation
ccessories Mounting ccessories for cceleration Sensors Type 84... 85... The most important consideration when installing an accelerometer on a test structure is to have a quality mounting surface for attachment.
Reversing the Weight Spiral with ZF Lightweight Design for Cars
Page 1/5, September 15, 2015 Reversing the Weight Spiral with ZF Lightweight Design for Cars Lightweight axle with wheel-guiding transverse spring: completely new passenger car axle design combines several
NUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. Coaxial, low noise, orange, PVC jacket
NUMBER SIDE VIEW DESCRIPTION RANGE DIAMETER C F in. pf/ft. J1 Coaxial, low noise, orange, PVC CABLES 55 to 80 67 to 176 0.088 cables & connectors J3 Coaxial, low noise, high temperature, red, Teflon 100
Features. Available with 0,5-4,5Vdc output. Operating from -40 to +140 C. Designed for harsh environment. Large Bandwidth
Miniature Pressure Sensor for Harsh Environment Features Available with 0,5-4,5Vdc output Operating from -40 to +40 C Designed for harsh environment Large Bandwidth Applications Automotive - on vehicule
FRONT & REAR AXLE SECTIONAX CONTENTS. FRONT AXLE...2 Precautions...2
FRONT & REAR AXLE SECTIONAX CONTENTS FRONT AXLE...2 Precautions...2 PRECAUTIONS...2 Preparation...2 SPECIAL SERVICE TOOLS...2 COMMERCIAL SERVICE TOOLS...2 Noise, Vibration and Harshness (NVH) Troubleshooting...3
Discussion of Noise and Vibration Analysis and Control
Discussion of Noise and Vibration Analysis and Control One Company, Many Solutions White Paper Boyd Corporation With decades of experience and a wholly-owned global footprint, Boyd provides best-cost,
INSTALLATION MANUAL AND OPERATING INSTRUCTIONS XX and XX Series Electric Attitude Indicator
INSTALLATION MANUAL AND OPERATING INSTRUCTIONS 4300-3XX and 4300-5XX Series Electric Attitude Indicator MID-CONTINENT INST. CO., INC MANUAL NUMBER 9015692 Copyright 2003 Mid-Continent Instrument Co., Inc.
55GS1 DC/DC Converter
DC/DC Converter 25-Watt Ruggedized Converter Conduction-Cooled, Single Output Proudly made in the USA Description NAI s is a COTS, that accepts a +28 VDC input and provides a single full-power output at
Small Traction powerbloc powerbloc dry Fiamm Motive Power XFC TM
Small Traction powerbloc powerbloc dry Fiamm Motive Power XFC TM Bigger power for small traction Powerbloc Powerbloc dry Fiamm Motive Power XFC TM Powerbloc, powerbloc dry and Fiamm Motive Power XFC are
Instruction Manual. Vibration Severity Meter VM12
Instruction Manual Vibration Severity Meter VM12 Metra Mess- und Frequenztechnik Radebeul Meissner Str. 58 - D-01445 Radebeul / Germany Phone: +49-351-836 2191 Fax: +49-351-836 2940 Email: Info@MMF.de
WIRE ROPE ISOLATORS C/CB SERIES APPLICATIONS HELICAL WIRE ROPE ISOLATORS FEATURES & BENEFITS
0.03-1.50 APPLICATIONS HELICAL The C/CB Series isolators are made up of helical, stranded-wire rope held with rugged metal retaining bars. This design provides excellent shock and vibration isolation in
1999 E-Series Workshop Manual
http://www.fordservicecontent.com/pubs/content/~wsxm/~mus~len/21/sxm31c16.h... Page 1 of 3 SECTION 303-01C: Engine 6.8L 1999 E-Series Workshop Manual IN-VEHICLE REPAIR Procedure revision date: 06/30/1998
Mass Combi Ultra 24/ (230 V)
Mass Combi Ultra 24/3500-100 (230 V) Product code: 38023500 The Mass Combi Ultra series comprises several models, varying from 3000 W to 3500 W. For higher capacities up to 35 kw the Combi Ultra can be
SSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview
Product Description The MediaSensor (P51) family of bulk micro-machined, absolute, gage and sealed pressure transducers and transmitters are for both harsh and benign media with the superior typical accuracy
Hydro Stator End Winding Accelerometer System
Hydro Stator End Winding Accelerometer System Bently Nevada Asset Condition Monitoring Description The hydro Stator End Winding Accelerometer (SEW Accel) system provides a cost effective and reliable method
Driveshafts Technology
Driveshafts Technology 2 CV Technology Competence from the Original Equipment Supplier GKN Driveline is the world s leading supplier of automotive driveline components and systems. Our global market leadership
ANT130-L-ZS Series. Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages. Nanometer performance in a large travel format (35 mm to 160 mm )
ANT130-L-ZS Series Single-Axis Z Low-Profile Direct-Drive Nanopositioning Stages Nanometer performance in a large travel format (35 mm to 160 mm ) Dual-counterbalance, low-profile design High-dynamic,
MASTERVOLT PRICE LIST
MASTERVOLT PRICE LIST January 2017 USAGE OF THIS PRICE LIST Validity This price list is intended for business to business use only. All prices are in Euro ex. VAT and are valid from 1 January 2017. This
PRODUCT REQUIREMENTS
Model 644 Technical Specifications Page 1 of 9 GAS TURBINE AND JET ENGINE COMPONENT TESTING Mass Airflow Test Stand PRODUCT REQUIREMENTS Multiple manufacturers in the Aerospace industry required Airflow
Cartridge Valve and Manifold Technologies
Energy Efficient Hydraulics and Pneumatics Conference Cartridge Valve and Manifold Technologies A Components Approach to Improved Energy Efficiency How Can Components Lead to Greater Energy Efficiency?
Hydro Stator End Winding Accelerometer System
Hydro Stator End Winding Accelerometer System Bently Nevada* Asset Condition Monitoring Description The hydro Stator End Winding Accelerometer (SEW Accel) system provides a cost effective and reliable
Installation Manual. Revision Date Change Description Approval Initial 01/Oct/2017 N/A. Aveo Engineering Group, s.r.o.
Revision Date Change Description Approval Initial 01/Oct/2017 N/A Aveo Engineering Group, s.r.o. www.aveoengineering.com 1. PRODUCT INFO Fully D0-160 tested and weighing in at only 23 grams, MicroMax will
Static and Dynamic Calibration of a Triaxial Force Gage for Monitoring the Structureborne Forces Within a Freon Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 1992 Static and Dynamic Calibration of a Triaxial Force Gage for Monitoring the Structureborne
EMC-HD. C 01_2 Subheadline_15pt/7.2mm
C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder
Patric Hed, Product Manager, ABB Arc Welding Products New Generation Positioners. ABB Group June 22, 2010 Slide 1
Patric Hed, Product Manager, 2010-06-24 ABB Arc Welding Products New Generation Positioners June 22, 2010 Slide 1 4th Generation Positioners 1 st Generation 1982 S2/S3 2 nd Generation 1995 S3/S4/S4C 3
797V Piezoelectric Velocity Sensor
797V Piezoelectric Velocity Sensor Installation Manual (Product # : 9400-09M2A-103) This manual divides into the following sections: Section 1: Section 2: Installation of the 797V Piezoelectric Velocity
ELASTOMERS CLEVITE ELASTOMERS. Noise, vibration and harshness control technology, accelerated
ELASTOMERS CLEVITE ELASTOMERS Noise, vibration and harshness control technology, accelerated SM CLEVITE Elastomers Forward thinking. Forward moving. Where transportation goes for innovation For more than
More Precision. mainsensor Magneto-inductive displacement sensor
More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative
Dual Lock Fastening System
Dual Lock Fastening System Product Data Sheet Updated : April 1999 Supersedes : June 1995 Product Description Dual Lock fastener is a reclosable fastening system where mushroom shaped stems interlock with
Motorsport Sensors
WWW.PCB.COM Motorsport Sensors Accelerometers; Force Sensors; Preamplifiers; Microphones; Torque Sensors; Pressure Sensors; Load Cells; Modally Tuned, ICP, Impact Hammers; and Signal Conditioners Automotive
Eaton India Engineering Center & IIT Madras Research & Technology Collaboration
Eaton India Engineering Center & IIT Madras Research & Technology Collaboration Sudhakar Potukuchi, PhD VP Engineering Srinivas Mutukuri, PhD Head, Corporate Research & Technology Nikhil Tambe, PhD Manager,
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION From small medical pumps to large diesel engines, vibration is unavoidable and dangerous if left unchecked in rotating and oscillating machinery.
NVH. NVH: from the Vehicle to the Lab. Damián González Centro Tecnológico de Automoción de Galicia
NVH From the Vehicle to the Lab Damián González Centro Tecnológico de Automoción de Galicia www.ctag.com 1 Contents 1. Problem Definition: NVH in Vehicle Components 2. Proposed Solution: From the Vehicle
INTAKE AND EXHAUST GROUP CONTENTS EXHAUST SYSTEM AIR INTAKE SYSTEM
15-1 GROUP 15 INTAKE AND EXHAUST CONTENTS AIR INTAKE SYSTEM............ 15-2 AIR DUCT AND AIR CLEANER......... 15-2 CHARGE AIR COOLER.. 15-3 INTAKE MANIFOLD.................. 15-3.............. 15-4 EXHAUST
Sealed Sensor Connector (SSC) System
Introduction Product Features Robust housing, glass filled PBT for high temperature applications Terminal Position Assurance (TPA) to assure proper position of contact in housing Damage protected internal
ACOUSTIC AND VIBRATION ANALYSIS OF FLUID INDUCED BLOWER AND PIPING UNWANTED MOTION
Proceedings of the ASME 2011 Pressure Vessels and Piping Division Conference PVP2011 July 17-21, 2011, Baltimore, Maryland, USA PVP2011-57017 ACOUSTIC AND VIBRATION ANALYSIS OF FLUID INDUCED BLOWER AND
2014 Lancer Systems all rights reserved
2014 Lancer Systems all rights reserved PROPRIETARY NOTICE: This contains Lancer Systems confidential, proprietary and/or competition sensitive data. ITAR NOTICE: Warning This document contains technical
UPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
FRONT AXLE SECTION CONTENTS D DRIVELINE/AXLE FAX-1 FAX
D DRIVELINE/AXLE A SECTION FRONT AXLE B C FAX CONTENTS E PRECAUTIONS... 2 Precautions... 2 PREPARATION... 3 Special Service Tools... 3 Commercial Service Tools... 3 NOISE, VIBRATION, AND HARSHNESS (NVH)
Advance Data Sheet: idq Series Filter Module. idq Series Filter Module 75V Input, 10A Output
idq Series Filter Module 75V Input, 10A Output idq48 filter modules are designed to help reduce differential and common mode conducted emissions from high frequency switching power supplies. The modules
Experimental NVH evaluation of a pure electric vehicle in transient operation modes
Experimental NVH evaluation of a pure electric vehicle in transient operation modes Rong Guo 1, Xiao-kang Wei 2, Jun Gao 3 Clean Energy Automotive Engineering Center, Tongji University, Shanghai, People
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
FRONT AXLE SECTION FAX CONTENTS D DRIVELINE/AXLE FAX-1 FAX
D DRIVELINE/AXLE SECTION FAX A FRONT AXLE B C FAX CONTENTS E PRECAUTIONS... 2 Precautions... 2 PREPARATION... 3 Special Service Tools... 3 Commercial Service Tools... 3 NOISE, VIBRATION, AND HARSHNESS
LSS-T/10-W12. Adjustable Output 10 Amp SIP-mount DC/DC Converter. PRODUCT OVERVIEW FEATURES
www.murata-ps.com FEATURES Vertical SIP-mount small footprint package Output from 0.6 to 6 Volts up to 51 Watts Ultra-wide 4.5 to 13.8 Vdc input range Outstanding thermal performance and derating Extensive
MISSION-CRITICAL HIGH VOLTAGE COMPONENTS FOR MASS SPECTROMETRY SYSTEMS THE WORLD LEADER IN PRECISION POWER CONVERSION NOW POWERS MASS SPECTROMETRY
MISSION-CRITICAL HIGH VOLTAGE COMPONENTS FOR MASS SPECTROMETRY SYSTEMS THE WORLD LEADER IN PRECISION POWER CONVERSION NOW POWERS MASS SPECTROMETRY TECHNOLOGY HiTek Power and UltraVolt, pioneers of today
Application Solutions for Today s Rotorcraft Industry
3:40 PM Page 1 Applications Application Solutions for Today s Rotorcraft Industry ITT aerospace product lines are continually expanding to provide our customers with unique solutions for applications on
ABB Positioners -reliability -quality -performance
Positioner range - 1-01-11-06 - ABB Positioners -reliability -quality -performance Positioner range - 2 Positioner range General features All All ABB ABB positioners are are of of robust robust construction