Toll Free: 877/ Fax: 814/

Plateform Mounts Heavy Duty Plateform Mounts Multiplane Mounts

Featuring: Plateform Mounts Heavy Duty Plateform Mounts Multiplane Mounts Lord Plateform Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide

WIRE ROPE ISOLATORS C/CB SERIES APPLICATIONS HELICAL WIRE ROPE ISOLATORS FEATURES & BENEFITS

0.03-1.50 APPLICATIONS HELICAL The C/CB Series isolators are made up of helical, stranded-wire rope held with rugged metal retaining bars. This design provides excellent shock and vibration isolation in

SMAC ISOLATORS CATALOGUE

SMAC ISOLATORS CATALOGUE Building together future solutions Indice F Overview SMAC is a dynamic company specializing in the analysis, design and manufacturing of complex rubber parts for demanding fields

22000 MOUNT SERIES. Features. Benefits. Load Range. Low-profile, high capacity mounts for vibration and shock protection.

2 MOUNT SERIES Low-profile, high capacity mounts for vibration and shock protection. Features Fail-safe when used with snubbing washer Axial to radial stiffness of 1:1 Low natural frequency Sturdy, reliable

INDUSTRIAL CONICAL MOUNTS

INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks

INDUSTRIAL CONICAL MOUNTS

INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load

LORD Micro-Mounts for Electronic Components PRODUCT BROCHURE

LORD Micro-Mounts for Electronic Components PRODUCT BROCHURE Creating Solutions to Your Most Demanding Challenges Are your electronic circuit boards suffering from excessive shock and vibration? A COLLABORATIVE

EQUIPMENT TRAY ASSEMBLIES

EQUIPMENT TRAY ASSEMBLIES ARINC 404 & 600 MOUNTING TRAYS AND ACCESSORIES B/E Lighting & Integrated Systems specializes in standard ARINC 404 & 600 mounting trays as well as custom tray designs providing

CENTER-BONDED MOUNTS. Center-Bonded Mounts. Page 51 of 124

Page 51 of 124 Center-Bonded Mounts Featuring: CB-1100 Series CB-1180 Series CBA Series CBA-50 Series STA Series Safetied Tubeform Series LORD Center-Bonded Mounts isolate vibration, control shock and

SHOCK ABSORBERS SHOCK ABSORBERS.

SHOCK ABSORBERS SHOCK ABSORBERS Visit : E-mail : www.theallpowersource.com lp we com info@theallpowersource.com I ABOUT US The Allpower Source (TAS) is a division of Technology Dynamics Inc. (TDI) in Bergenfield

PLED Ultra Low Holding Current Series

RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching

ARINC 404 and 600 mounting trays and accessories. Equipment tray assemblies

ARINC 404 and 600 mounting trays and accessories. Equipment tray assemblies ARINC 404 and 600 mounting trays and accessories Rockwell Collins specializes in standard ARINC 404 and 600 mounting trays, as

PLATEFORM MOUNTS Page 19 of 124

PLATEFORM MOUNTS Page 19 of 124 Plateform Mounts Featuring: Plateform Mounts Heavy-Duty Plateform Mounts Multiplane Mounts LORD Plateform Mounts provide effective isolation against vibration. The contour

BUSHINGS. Bushings. Page 77 of 124

Page 77 of 124 Bushings Featuring: Center-Bonded Bushings Square-Bonded Bushings LORD Center-Bonded Bushings and Square-Bonded Bushings are used in applications where the absorption shock, attenuation

Optical Tables and Vibration Control. ND01 Series. Dimensions [in. (mm)] Model (Metric) A B ND01-A (M-ND01-A) 2.00 (50.0) 1.00 (25.

1 NewDamp Constant Natural Frequency Elastomeric Isolators ND1 Series ND1- supports up to 2 lbs. and provides excellent CNF (constant natural frequency) characteristics: the vertical natural frequency

Ball Slide Assemblies

NMS SERIES Ball Slide Assemblies Non-Magnetic Ball Slides Inch Version Non-Magnetic Linear Slides 6 Reasons to choose Del-Tron Non-Magnetic Ball Slides Del-Tron Ball Slides Load Ratings and Life Estimates

Ball Rail Systems Corrosion-resistant

Ball Rail Systems Corrosion-resistant RE 82 222/2003-09 The Drive & Control Company Resist NR II Resist NR Aluminum Runner Blocks Size 15 35 Aluminum Version made of Aluminum Same price as steel version

NOT RECOMMENDED FOR NEW DESIGNS

olt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features 40 C to + C operation 19 to DC input 50 V for 50 ms transient protection Fully isolated Fixed frequency Remote sense on single models Inhibit/sync

SLS/MLS Screw Drives OVERVIEW

SLS/MLS Screw Drives OVERVIEW APPLICATION BENEFITS Rigid, low-profile design is ideal for space-sensitive applications Consistent carrier tracking and long actuator life Wide base for ease of mounting.

FLANGED TYPE LINEAR BEARINGS

FLANED TYPE LINEAR BEARINS Inch and Metric Recirculating Ball SQUARE FLANE (SF) ROUND RANE (RF) Requires no housing, thus reducing costs Requires little installation space Ensures high accuracy upon replacement

BLINDMATE CONNECTORS AND COMPONENTS. Selection Guide BMA BMMA BMZ BZ

BLINDMATE CONNECTORS AND COMPONENTS SV Microwave, Inc. is a world leader in the RF/microwave industry. We design and manufacture coaxial connectors, cable assemblies, attenuators, terminations, and custom

220-UL PUMP PARTS PRICE LIST

ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION

PLATE FORM MOUNTS 100 SERIES, 150 SERIES FOR ISOLATION OF STEADY VIBRATION AND CONTROL OF OCCASIONAL SHOCK

PLT ORM MONTS 00 SRS, 50 SRS OR SOLTON O STY VRTON N ONTROL O OSONL SHOK Standard stock Plate orm Mounts are widely used to efficiently isolate steady-state vibration and control occasional shock. These

SPECIFICATIONS for INTERNALLY TERMINATED COUPLERS

3.575 Bus-J1 ESI-2210 1 Stub-J2 Stub-J3.90.166 +.003 Dia. 3 X.487 Ref. 2.75 figure 1 J1 (BUS) J2 (STUB) J3 (STUB) - = 59 Ohms, 1%, 2W = 78 Ohms, 1%, 2W - = TURNS RATIO 1 : 1.41 TWO STUB ONE INTERNAL TERMINATION

KEL DIFFERENTIAL PRESSURE FLOWMETERS

KEL DIFFERENTIAL PRESSURE FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Rugged Metal Construction Flow Rate to 2000 GPM Linear Scale For Horizontal or Vertical Pipes Threaded

A Global Leader in Semiconductor Bearings

unique design solutions to complex problems. A Global Leader in Semiconductor Bearings h i g h p e r f o r m a n c e. i n n o v a t i v e s e a l i n g. e x t e n d e d l i f e. www.rbcbearings.com Semiconductor

for Quadrax and ELIO 8

1 - CHARACTERISTICS Mechanical Current ratings, continuous: Endurance: 500 matings Insertion and extraction forces, max: - shell size 1: 120 N (27 Ibs) - shell size 2: 267 N (60 Ibs) - shell size 3: 467

Parts Lists UII Pump Parts

Parts Lists Parts Lists Waukesha Cherry-Burrell 006-04-05-08-UII Pump Parts Page 48 95-0305 September 009 006-04-05-08-UII Pump Parts PART NOTES 006-U Pump Body See Note 006-U Pump Body with Flush See

FTS/FTC TAXIWAY LIGHTING. Taxiway Centerline, Stop Bar and Intersection Inset Light MEDIUM-INTENSITY. Compliance with Standards.

Taxiway Centerline, Stop Bar and Intersection Inset Light MEDIUM-INTENSITY Compliance with Standards FAA: Fittings for straight sections in compliance with FAA L-852A and L-852C specification, AC150/5345-46

LINEAR MOTION SYSTEM COMPONENTS

R RECISION NDUSTRIAL OMPONENTS R LINEAR MOTION SYSTEM COMPONENTS LINEAR MOTION SYSTEM COMPONENTS PIC Design has added a most comprehensive selection of precision components for linear motion applications.

SP Standard Profile. In Duct or Flanged to Duct Install Types OPPOSED ACTION PARALLEL ACTION. Extended Rear Flange Install Type

1 SUBMITTAL DATA Series 1000 Air-Foil Control Damper SP Standard Profile 2" 50.8 mm In Duct or Flanged to Duct Install Types 4" 101.6 mm 6.4" 162.6 mm blades fully open 1" 25.4 mm Extended Rear Flange

Universal APU2 Pump Automotive Paint Series

Universal APU2 Pump Automotive Paint Series New levels of performance. Reduced paint shop and mix room costs. For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing

UII Pump Parts

Parts Lists 030-034-040-UII Pump Parts Waukesha Cherry-Burrell. Page 54 95-03015 September 2009 030-034-040-UII Pump Parts 1 7 8 9 10 : 1. 2. 12. 12A. 13. PART 030-U2 Pump Body 1 See Note 1 1 030-U2 Pump

Cleveland P/N. Replaces OEM P/N (A ) 60-5 ( ) 10-24D ( )

Applicability Data FAA-PMA Product Directory Replacement Equipment Master Cylinder Actuator Shimmy Damper Model/ Name Year/ Serial Number American Champion Aircraft Corp. 8KCAB 8GCBC All 10-54 (010-05400)

U1 PUMP PARTS PRICE LIST

006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1

TE B. Points. Precision Positioning Table TE. Comparison with Precision Positioning Table TU. Major product specifications.

3 4 Precision Positioning Table TE TE B Ball screw inear Points Table specification is selectable according to your use 1 Slide table ight weight, low profile and compact positioning table using high-strength

- (90 - f (GHz)) db (.05 SQT(f(GHz))) db

TNC Specifications to MIL-C-39012 The specifications below are general specifications for all TNC connectors. Specific Data for VSWR, Insertion Loss, R.F. leakage, etc., are available from the factory

DAIDYNE DDK05 DAIDYNE DDK05. Major Superior Points to Roller Bearing. Superior Points to Roller Bearing. Physical Characteristics

Major Superior Points to Roller Bearing bearing is free from the skew problem. bearing can also be used for sliding motion in the axial direction. bearing allows very compact equipment design that does

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing

305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style

THREADED INSERTS.

www.jergensinc.com 10 Bolster Plate Bushings... 10.5 Installation and Removal Instructions... 10.2 Internal Locking Thread Repair Insert... 10.8-10.9 Keylocking, Extra Heavy Duty Industrial Style... 10.6

F Load. Load. Load Braga Drive, Broadview, IL t: f: Toll-Free (U.S.A)

naval wire rope isolators: naval polycal efinition series NMP wire rope isolators: naval polycal performance ata series NMP Bar Bar naval polycal isolator from the NMP series D E E materials an finishes

U1 PUMP PARTS PRICE LIST

ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1

V MOUNT SERIES. Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations.

V MOUNT SERIES Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations. APPLICATIONS Class 6,7,8 truck engines Bus engines Off-highway vehicle engines On & off-highway

U1 PUMP PARTS PRICE LIST

ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1

Static O-Ring Reference

63 Static Reference Industrial Static Seal Glands Male Gland Female Gland 1/2 E 1/2 E B1 Dia. (B1 Min = A Max. 2L Max.) B Dia. C Dia. D Dia. A Dia. A1 Dia. (A1 Max. = B Min. 2 L Max.) (e) 0 5 (TYP.) 32

TNC Series Series C TN 114

TNC Series TNC Series 114 TNC Interface Mating Dimensions (Per MIL-STD-348) TNC Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.440 11.17 B.314 7.98.315

Chapter 2. Background

Chapter 2 Background The purpose of this chapter is to provide the necessary background for this research. This chapter will first discuss the tradeoffs associated with typical passive single-degreeof-freedom

Signal Industrial Products Corp.

Signal Industrial Products Corp. COMPANY: FAX NUMBER: ADDRESS: P.O. BOX: MAIL STOP: CITY: STATE: ZIP: COUNTRY: CONTACT: TITLE: PHONE: EXT: ALT. CONTACT: TITLE: PHONE: EXT: NAME OF PERSON SUBMITTING DATA:

NL 50 S M / 5 - A - D

NL single-output DC/DC converters 8Vin, Vout, watts How to Order: NL S M / - A - D Series Total Output Power Single Output Industrial (I) or Military (M) INPUT CHARACTERISTICS : Options: Maximum current

37/38 Pneumatic Spring Diaphragm Actuator

GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features

*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings

Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.

The strain sensor is available with integrated electronic evaluator.

Strain Sensor DA68 Description The strain sensor DA68 is suitable for high-resolution detection of forces and deformation of structural works such as bridges, silo legs, offshore wind farms, railway lines,

High-Temperature Accelerometers PIEZOELECTRIC SENSORS FOR DYNAMIC MEASUREMENTS

s PIEZOELECTRIC SENSORS FOR DYNAMIC MEASUREMENTS s 3311A 3133A2 3030B5H 3023AH Miniature Triaxial Miniature/ESS Ultra Miniature Triaxial Miniature Through-Hole +320 F (+160 C) operation Lightweight HALT

R310EN 2211 ( ) The Drive & Control Company

eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball

E-1 SLIDE GUIDE ROTARY BALL SPLINE BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT SLIDEROTARYBUSH STROKE BUSH SLIDE SHAFT SLIDE TABLE GONIO WAY

SLIDE GUIDE BALL SPLINE ROTARY BALL SPLINE TOPBALL PRODUCTS SLIDE BUSH SLIDE UNIT STROKE BUSH SLIDEROTARYBUSH SLIDE SHAFT SLIDE WAY SLIDE TABLE GONIO WAY E-1 ACTUATOR SLIDE SCREW Table E-1 A wide variety

Bearings and Spacers

Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page

NB 50 S M / 5 - A - D

NBS single and triple-output DC/DC converters 4 Vin, 8Vout, watts FEATURES.38 Inch Profile Synchronization N + Redundancy Remote Turn On (TTL) Parallelable Operation Trim Pin How to Order: Over Temperature

INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES

INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.

Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series) 1

Designation: Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series) 1 This standard is issued under the fixed designation F2591; the number iediately following the designation

U2 PUMP PARTS PRICE LIST

ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2

GN Telescope-Linear motion bearings

GN 2410 Telescope-Linear motion bearings technical informations Specification Rail / Runner Heat treatable steel - zinc plated, blue passivated - Raceways hardened Balls Anti-friction bearing steel, hardened

MOUNTING CARRIAGE TOPS

MOUNTING CARRIAGE TOPS Linear Motion Systems " I " Holes (4) are for customer mounting purposes. MOTOR TABLE TOPS USE M4X.7 TAPPED HOLES Material: Aluminum Alloy (6061) Finish: Black Anodized Note: Mounting

DR magnetic piston. Compact Magnetic Sophisticated

DR magnetic piston Compact Magnetic Sophisticated DR Magnetic piston Compact Magnetic Sophisticated Guiding area Magnet Steel disc Spring space for single-acting cylinders Static sealing area Cushioning

A-Series All-Environment Loudspeaker

A-Series All-Environment Loudspeaker The Leader in Metal-Alloy Speaker Technology Models A6, A6T, A6E Features Indoor and outdoor all-weather speaker with fully-sealed cabinet Available versions: 8-ohm,

Issue 4 (Record Only) Job #: Innovent Submittal Date: October 30, 2012 Project: Location: Columbus, OH Innovent Job #: Submittal Issue: 4 (Record Only) Engineer: Contractor: Tag Innovent Model # AHU-BG-01

Adress: Anadolu OSB 4/A, Ankara Phone: Fax: Web: Mail:

Adress: Anadolu OSB 4/A, Ankara Phone: +90 312 354 40 99 Fax: +90 312 354 40 93 Web: www.gesmuhendislik.com Mail: info@gesmuhendislik.com GES Engineering founded in 2013 in Ankara OSTİM Organized Industry.

1, 2, 4, 6, 8, 10 and 12 in. (50, 100, 150, 200, 254, 300 mm) for all models Clevis Ends

M-Track DC Motor Acme Screw Up to 65 lb. (74 N) Rated Load Up to.75 in. (45 mm)/sec. Travel Speed M-Track compact units are completely self-contained and sealed to allow use in small spaces without sacrificing

RACK JACK. Synchronous Lifting Systems

RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion

RUBBER BELLOWS TYPE 1A & 1S SERIES

RUBBER BELLOWS TYPE 1A & 1S SERIES Description: Vibracoustics Ltd Reiflexa Bellows are made from various elastomers reinforced with high tensile textile or steel cords to provide the flexible elements

Heat-Shrinkable Tubing

H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office

Spring Mounts Damped Type To 200 lbs.

Spring Mounts Damped Type To 200 lbs. CO MP O NE NTS MATERIAL: Base Plate Mild Steel Spring igh-tensile Steel - Phosphated & Dyed Black End Cap Cast Light Alloy STAINLESS STEEL MES FOR LOADS OF 60 TO 200

DF / DFB / DFC DOUBLE WIDTH DOUBLE INLET FORWARD CURVED FANS

Catalog 6131 DF / DFB / DFC DOUBLE WIDTH DOUBLE INLET FORWARD CURVED FANS FOR ORIGINAL EQUIPMENT MANUFACTURES SERIES 1600 1/98 APPLICATIONS AND AVAILABLE TYPES DF - DFB - DFC DOUBLE INLET FANS DOUBLE INLET

A-Series All-Environment Loudspeaker

A-Series All-Environment Loudspeaker The Leader in Metal-Alloy Speaker Technology Models A8, A8T, A8E Features Indoor and outdoor all-weather speaker with fully-sealed cabinet Available versions: 8-ohm,

Ordering Information

Ordering Information STUBS P/N ONE P/N TWO CONNECTOR and REFERENCE TERMINATION TERMINATIONS MATING CONNECTOR FIGURE 2 ESI-2210 ESI-2310 BJ770/PL75 1/2 2 ESI-2220 ESI-2320 BJ377/PL375 1/2 2 ESI-2230 ESI-2330

SLIDE-RITE CR GEARBOX

CORROSION RESISTANT SLIDE-RITE CR GEARBOX 1-44_ TOL-O-MATIC, INC. CORROSION RESISTANT COMPONENTS. EFFICIENT POWER PERFORMANCE IN ENVIRONMENTALLY TOUGH APPLICATIONS. Like Tol-O-Matic s original Slide-Rite

Bearing Fundamentals. Timken Training

Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction

Type A-10 General Purpose Pressure Transmitter

General Purpose TRONIC > General Purpose > A-10 Type A-10 General Purpose Pressure Transmitter Standard Features Signal output: 4-20 ma 2-wire or 0-10 V 3-wire Supply voltage: 8-30 DC (14-30 VDC) Process

Ball Screws Inch Series

Ball Screws Inch Series BALL SCREWS Table of Contents Description Page Product Overview................................ 38 Precision Rolled Ball Screws Inch Series......... 42 Visual Product Reference

390 Series Multi-Stage Vertical In-Line Centrifugal Pumps

Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.

Air Springs for Industrial Applications

Air Springs for Industrial Applications Air Spring Overview ITT air springs are air-tight and sturdy pneumatic actuators for demanding industrial applications. Air springs are highly durable, precisely

DEEP GROOVE BALL BEARINGS

DEEP GROOVE BALL BEARINGS MOVING THE WHEELS OF THE INDUSTRY ABOUT NRB INDUSTRIAL BEARINGS LIMITED NRB Industrial Bearings Ltd is the industrial arm of the NRB Group. We manufacture bearings for various

Rodless Pneumatic Cylinders Series OSP-P

Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30

HT STRAIGHT ADAPTER, WRENCH FLATS ( )

HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS

International, LLC. SBA Series Single Ended Shear Beam Load Cell. Features. Specifications. Dimensions(mm)

SBA Series Single Ended Shear Beam Load Cell Stainless steel, welded seal High precision, High reliability Low profile construction Threaded load holes Platform weighing, axle weighing Tank, bin and hopper

RSA/RSM & GSA / GSM ELECTRIC ROD-STYLE ACTUATORS. Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099

RSA/RSM & GSA / GSM ELECTRIC ROD-STYLE ACTUATORS Toll Free Fax (877) SERV99 RSA & GSA Electric Rod-Style Actuator WHAT ARE THE RSA & THE GSA? The RSA is a flexible electric screw driven rod-style actuator.

PROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment

PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing

Standard Products Guide

Standard Products Guide 2015 MADE IN THE U.S.A. Sorbothane Standard Products Guide Table of Contents» Introduction 3» Selecting An Isolator 4» Durometer & Shape Factor 5» Bushings & Washers 6-7» Hemispheres

TIMKEN SNT SPLIT PLUMMER BLOCKS

TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION

Slide-Rite & Slide-Rite CR Gearbox

Gearboxes Gearbox and CR Gearbox Pages 2 through 7 Float-A-Shaft (FAS) Gearbox Pages 8 through 24 Visit www.tolomatic.com for the latest updates, CAD files and ordering. GEARBOXES www.tolomatic.com 1 GEARBOXES

ilift Suspension Lift System Universal Fitment Sheet

Suspension Lift Technologies LLC 2521 N Arizona Ave Chandler, AZ 85225 tel: 602-733-6410 info@iliftsystems.com ilift Suspension Lift System Universal Fitment Sheet ilift Suspension Lift System The ilift

Time Delta S Fixed Transit-Time Flow Meter System

Fixed Transit-Time Flow Meter System Key Features Dynamic flow correction Simple configuration Digital outputs Enhanced anti-bubble measurement technology (ABM) Rugged and reliable Maintenance free The

MODULAR AIR HANDLING UNITS GAH SERIES

MODULAR AIR HANDLING UNITS GAH SERIES 15 Models with Air Flows from 2,250 Cu.m/hr upto 77,800 Cu.m/hr Suitable for both Standard and District Cooling Applications GAH-TC-10-13 CONTENTS Design 2 Various

HDUF Gearing. Total Motion Control. Precision Gearing & Motion

HDUF Gearing Total Motion Control Precision Gearing & Motion Control Contents Compact, High Ratio, In-Line Gearing...2 The Basic Component Set...2 Configuration...3 Typical Installation...3 Ordering Information...3

Section 3. Rotary Joints. Introduction

Section Rotary Joints Introduction For more than forty years, MDL has produced waveguide rotary joints and is one of the major suppliers in both domestic and overseas markets. Many of the larger military

Sport Performance Aviation LLC or or

Sport Performance Aviation LLC Sales@FlywithSPA.com or 904.226.1881 Support@FlywithSPA.com or 904.563.4337 www.flywithspa.com Introduction Thank you for purchasing the Corvair rear generator kit from Sport

NOTES TABLE OF CONTENTS

OI-809F NOTES TABLE OF CONTENTS Page 1.0 Introduction & Quick Start Instructions...................... 2 2.0 Operating Principle & Applications......................... 3 3.0 Equipment Supplied.....................................

SRE4000 Suspension System Owner s Manual

SRE4000 Suspension System Owner s Manual SRE4000 Suspension System Contents Introduction...2 Parts Listing...3 Tripe Axle Setup...4 Measuring Shear Spring Deflection...5 Minimum Clearance Requirements...5

Single Pole Circuit Protectors 55. Multi-Pole Circuit Protectors 56. Configurations 58. Operating Characteristics 59.

Single Pole Circuit Protectors 55 Multi-Pole Circuit Protectors 56 Configurations 58 Operating Characteristics 59 Delay Curves 60 Specifications 61 Decision Tables 62 SINGLE POLE CIRCUIT PROTECTORS The

XLP Extra Low Pulse Blower

XLP Extra Low Pulse Blower XLP Extra Low Pulse Blower The Roots XLP is a 3-lobed blower utilising an improved Whispair chamber design. This combination of technologies results in a high efficiency blower

2.92mm connectors DIVIDER PAGE

connectors DIVIDER PAGE 167 interface dimensions REF. PLANE F SEALING GASKET E NOTE 1 F REF. PLANE E G.312 HEX. ØD ØC ØB ØD ØC ØB ØA A.250-36 UNS-2B H.250-36 UNS-2A.170 FULL MALE, FEMALE, Mil-Std-348A