IPT SERIES BAYONET-LOCK CONNECTORS HIGH-DENSITY MIL-DTL SERIES I CONNECTORS VG95328 QUALIFIED FOR RUGGED MILITARY AND INDUSTRIAL APPLICATIONS

Transcription

1 AYONET-OK ONNETORS IPT SERIES HIGH-DENSITY MI-DT SERIES I ONNETORS VG95328 QUAIFIED FOR RUGGED MIITARY AND INDUSTRIA APPIATIONS JUNE 2015 United Kingdom Germany France Nordic Italy Spain Japan

2 ETHERNET DATA OTOYTE TM THE FASTER 4/8 POE INTERONNETION SYSTEM FOR ETHERNET DATA IN EVERY APPIATIONS ITH connector with OTOYTE contacts is available with fully dedicated ETHERNET protocol or in a combo version where a mix of signal-power and Ethernet is required. RoHS compliant, IP67 (IP68 on request) exceeds performance expections typical in harsh environmental applications found throughout Rail and Industrial markets. OTOYTE contacts are vibration resistant and available to work with ETHERNET cables from AT 5 to AT 7A, MV-WT, RG58 oax. GENAIR, IN Air Way Glendale, A Tel: sales@glenair.com

3 Glenair IPT and IPT-SE Series MI-DT Serie I ayonet onnectors Technical Reference Table of ontents Introduction IPT and IPT SE product features and specifications A IPT-SE Series High Performance rimp ontact MI-DT Serie I ayonet onnector IPT Series General Duty Solder and rimp ontact MI-DT Serie I ayonet onnector onnector Accessories and Tools D Product Index omplete isting of atalog Pages and Part Number Index E 2015 Glenair, Inc. U.S. AGE ode Intro-1

4 Technical Data Glenair IPT and IPT-SE Series MI-DT Serie I ayonet onnectors Summary of onnector Styles and ackshells Glenair IPT and IPT SE series connectors offer rugged, high vibration performance and rapid mating for both high-performance and general duty signal connector applications. The products are environmentally sealed and can be equipped with EMI/RFI shield termination backshell accessories. IPT SE is qualified to VG oth product series are in accordance with MI-DT Serie I. IPT-SE AND IPT PRODUT FEATURES AND SPEIFIATIONS A Feature Applications Shell onstruction Description Factory equipment, off-road vehicles, military vehicles, sensors, power generators, and other industrial applications. Aluminum shell bodies provide durable performance in a lightweight package. Mating System Shell Surface oatings Environmental Sealing Temperature Tolerance ontacts ontact Plating Wire Gauge Materials Arrangements EMI Shielding Shell Styles Three pin bayonet system, 1/2 turn to full mate. A range of conductive and non-conductive surface coatings including standard admium finishes as well as RoHS compliant elecrostatic paint. Individual wire sealing grommets and optional environmental backshells provide moisture protection up to IP67. F6, F7, F11 and G3 plated connectors are tested to -55 to 125. High performance crimp contacts and retention clips (IPT SE) and general duty crimp and solder contacts (IPT). opper alloy with gold plating. ontacts support wire sizes #12 - #14 (Size 12), #16 - #20 gauge (Size 16) and #20 - #24 (size 20). Resilient high-insulation synthetic insert (polychloroprene or silicone). IPT SE version includes hard plastic retention clip retainer. IPT SE: 25 different power and signal insert arrangements, featuring 16 and 20 gauge contacts; 3 to 61 contacts. IPT: 39 different power and signal insert arrangements, featuring 12, 16 and 20 gauge contacts; 2 to 61 contacts. Shield termination backshell accessories are available for all plug and receptacle configurations. omplete range of shell styles is available, including front and rear mount flange receptacles, jam nut receptacles, bulkhead feedthrus, and straight and 90 plugs. Polarization Approvals Intermateability 5 keyway configuration with optional polarization. IPT SE is qualified to VG oth IPT and IPT SE meet all requirements of MI-DT Serie I. Intermateable with all industry standard bayonet connectors designed to MI-DT Serie I and VG including Veam VPT, Amphenol PT and ITT annon KPT Glenair, Inc. U.S. AGE ode A-1

5 SEAROW onnectors Marine ronze onnectors for Harsh Environmental Applications 2015 Glenair, Inc. U.S. AGE ode A-2

6 SEAROW onnectors Marine ronze onnectors for Harsh Environmental Applications Shipboard Application Glenair manufactures connectors qualified to V96929, VG95234 and VG95328 standards. These connectors are mostly used in harshenvironment military applications for ground vehicles and ground systems. Our new Marine ronze version increases the level of robustness of these connectors to be succesfully used in all severe environment navy installations, as well as off-shore platforms, sea ports, geological and oceanographic applications Glenair, Inc. U.S. AGE ode Navy Application A-3 SEAROW TM onnector Series are Manufactured in Italy by GENAIR ITAIA S.p.A.

7 Glenair IPT SE Series High Performance rimp ontact ayonet-ock Signal onnectors (MI-DT Serie I) IPT-SE Series ayonet ock onnectors IPT SE Series High Performance rimp ontact MI-DT Serie I ayonet onnector Section High Performance rimp ontact ayonet-ock Signal onnectors (MI-DT Serie I) High Performance rimp ontact (MI-DT Serie I) Styles and lasses -2-3 ; -4 Technical data -5 How to Order Part Number reakdown -6 VG95328 Part Number ross Reference -7 Materials and Finishes -8 Pin and Socket rimp ontact Dimensions -9 Arrangement Tables and Sealing Plugs -10 Available Arrangements -11 ; 12 Fastener Height Requirements and Panel utout Dimensions -13 IPT SE onnectors onfigurations -14 ; Glenair, Inc. U.S. AGE ode

8 IPT -SE Series ayonet ock onnectors Glenair IPT SE Series High Performance rimp ontact ayonet-ock Signal onnectors (MI-DT Serie I) IPT SE rings High-Performance rimp ontact Termination to MI-DT Serie I ayonet onnectors Harsh Application Environments The Glenair Series IPT SE ayonet-ock Signal onnector is ideally suited for all general and environmental applications that require a high-performance military type cylindrical connector with crimp-removable contacts. Qualified to VG95328, the bayonet mechanism provides fast and easy coupling, especially when the connector is situated in an awkward or hard to reach location. Environmental protection up to IP67 levels provides additional reliability and the flexibility to specify these rugged connectors in harsh applications such as in machine tools and factory automation. Supplied crimp contacts are goldplated copper alloy. s are made from highinsulation synthetic rubber, oil and temperature resistant from -55 to +125 (polychloroprene) to +200 (silicone). Intermateability The Series IPT SE onnector is interchangeable and intermateable with the wide range of industry-standard bayonet connectors designed around MI-DT Serie I and/or qualified to VG 95328, including ITT annon KPT. Main Technical haracteristics High Performance rimp Version with ontact Retention lips and Sealed s 2 ontact Sizes: #20 and # Signal ontact Arrangements, 3 to 61 ontacts Rear-ion/Front Release Snap-In ontacts Intermateable with Other MI-DT Serie I Products Ruggedized ontact Retention lip Environmentally Sealed System Audible and Visual oupling Indicators Keyed Polarization 2015 Glenair, Inc. U.S. AGE ode

9 Glenair IPT SE Series ayonet-ock High Performance rimp ontact (MI-DT Serie I) Styles and lasses IPT-SE Series ayonet ock onnectors Styles and lasses ASE: For general-duty applications. This connector-backshell assembly is supplied with a general-duty backshell for the attachment of additional accessories such as MS 3057 cable clamps (ordered separately). Individual wire sealing grommet supplied. SE: For general-duty environmental applications using unjacketed wire bundles. Additional environmental sealing is provided through an individual wire sealing grommet in the connector and an overall cable grommet seal in the backshell. No cable clamp supplied. ASE...N0: Wall mounting/in-line receptacle and plug with accessory threads in the rear for the backshell and accessories attachment; through mounting holes. SE...SR: Same as class SE, but with cable clamp and bushing for strain-relief. GSE: Plug with straight backshell for heatshrink boot. MSE: Plug with backshell for EMI shield termination and/or heatshrink boot for Shell Styles IPT00, IPT01, IPT06 and IPT07. The Glenair IPT SE miniature bayonet-lock connector series features a 3 point bayonet coupling mating interface with stainless steel coupling pins for advanced durability. Resilient inserts provide outstanding dielectric performance and environmental protection. Individual wire sealing grommets elevate the environmental protection rating up to IP Glenair, Inc. U.S. AGE ode

10 THIS OPYRIGHTED DOUMENT IS THE PROPERTY OF GENAIR, IN. AND IS FURNISHED ON THE ONDITION THAT IT IS NOT TO E DISOSED, REPRODUED IN WHOE OR IN PART, OR USED TO SOIIT QUOTATIONS FROM OMPETITIVE SOURES, OR USED FOR MANUFATURE Y ANYONE OTHER THAN GENAIR, IN. WITHOUT WRITTEN PERMISSION FROM GENAIR, IN. THE INFORMATION HEREIN HAS EEN DEVEOPED AT GENAIR'S EXPENSE AND MAY E USED FOR ENGINEERING EVAUATION AND INORPORATION INTO TEHNIA SPEIFIATIONS AND OTHER DOUMENTS WHIH SPEIFY PROUREMENT OF PRODUTS FROM GENAIR, IN. THIS OPYRIGHTED DOUMENT IS THE PROPERTY OF GENAIR, IN. AND IS FURNISHED ON THE ONDITION THAT IT IS NOT TO E DISOSED, REPRODUED IN WHOE OR IN PART, OR USED TO SOIIT QUOTATIONS FROM OMPETITIVE SOURES, OR USED FOR MANUFATURE Y ANYONE OTHER THAN GENAIR, IN. WITHOUT WRITTEN PERMISSION FROM GENAIR, IN. THE INFORMATION HEREIN HAS EEN DEVEOPED AT GENAIR'S EXPENSE AND MAY E USED FOR ENGINEERING EVAUATION AND THIS INORPORATION OPYRIGHTED DOUMENT INTO IS TEHNIA THE PROPERTY SPEIFIATIONS OF GENAIR, IN. AND IS AND FURNISHED OTHER ON DOUMENTS THE ONDITION THAT WHIH IT IS NOT SPEIFY TO E DISOSED, PROUREMENT REPRODUED OF IN WHOE PRODUTS FROM GENAIR, IN. OR IN PART, OR USED TO SOIIT QUOTATIONS FROM OMPETITIVE SOURES, OR USED FOR MANUFATURE Y ANYONE OTHER THAN GENAIR, IN. WITHOUT WRITTEN PERMISSION FROM GENAIR, IN. THE INFORMATION HEREIN HAS EEN DEVEOPED AT GENAIR'S EXPENSE AND MAY E USED FOR ENGINEERING EVAUATION AND INORPORATION INTO TEHNIA SPEIFIATIONS AND OTHER DOUMENTS WHIH SPEIFY PROUREMENT OF PRODUTS FROM GENAIR, IN. THIS OPYRIGHTED DOUMENT IS THE PROPERTY OF GENAIR, IN. AND IS FURNISHED ON THE ONDITION THAT IT IS NOT TO E DISOSED, REPRODUED IN WHOE OR IN PART, OR USED TO SOIIT QUOTATIONS FROM OMPETITIVE SOURES, OR USED FOR MANUFATURE Y ANYONE OTHER THAN GENAIR, IN. WITHOUT WRITTEN PERMISSION FROM GENAIR, IN. THE INFORMATION HEREIN HAS EEN DEVEOPED AT GENAIR'S EXPENSE AND MAY E USED FOR ENGINEERING EVAUATION AND INORPORATION INTO TEHNIA SPEIFIATIONS AND OTHER DOUMENTS WHIH SPEIFY PROUREMENT OF PRODUTS FROM GENAIR, IN. FIRMA SIGNATURE DATA DATE DATA DATE Inner / outer edges without specific indication DRAWN MATERIA HEKED 0.2x45Ā R 0.2 DESRIPTION APPROVED ATTENTION: Non sono ammessi spigoli vivi e bave di lavorazione Sharp edges or burrs not allowed >10 >50 > ā1ā ā0ā30' ā0ā20' ā0ā10' PREVIOUS ODE File: ustodia A size 20 ODIE PREEDENTE : MATERIAE MATERIA DATA DATE nā / INDIE nā / INDIE DISEGNATO DRAWN FIRMA SIGNATURE DATA DATE Spigoli interni / esterni privi di indicazione Inner / outer edges without specific indication FIRMA SIGNATURE DATA DATE DATA DATE Inner / outer edges without specific indication DRAWN MATERIA HEKED 0.2x45Ā R 0.2 DESRIPTION WEIGHT APPROVED Tolleranze generali ATTENTION: General tolerances Non sono ammessi spigoli vivi e bave di lavorazione Sharp edges or burrs not allowed >10 >50 >120 Scost. lineari ed >6 > angolari per grado " f " inear and angular ā1ā ā0ā30' ā0ā20' ā0ā10' tolerances for " f " grade ā0.05 ā0.1 ā0.15 SHEET PREVIOUS ODE File: ustodia A size 20 ODIE PREEDENTE : MATERIAE MATERIA PESO WEIGHT AREA GRUPPO SERIES Alluminio 2011-T3 sec. ST003 g cm² DATA DATE Ra (µm) nā / INDIE nā / INDIE DISEGNATO ONTROATO APPROVATO ATTENZIONE: SAA SAE DRAWN HEKED APPROVED Tolleranze generali ATTENTION: FIRMA General tolerances SIGNATURE Non sono ammessi spigoli vivi e bave di lavorazione ISO fh DATA DATE Sharp edges or burrs not allowed Spigoli interni / esterni 0.2x45Ā R 0.2 >10 >50 >120 Scost. lineari ed >6 > PART NUMER privi di indicazione angolari per grado " f " Inner / outer edges without inear and angular ā1ā ā0ā30' ā0ā20' ā0ā10' tolerances for " f " grade ā0.05 ā0.1 ā specific indication DESRIZIONE DESRIPTION FOGIO SHEET ODIE ODE File: ustodia A size 20 ODIE PREEDENTE : PREVIOUS ODE DESRIZIONE 0.2x45Ā R 0.2 DESRIPTION PESO WEIGHT AREA GRUPPO SERIES g cm² Ra (µm) ATTENZIONE: SAA SAE Tolleranze generali ATTENTION: General tolerances Non sono ammessi spigoli vivi e bave di lavorazione ISO fh Sharp edges or burrs not allowed >10 >50 >120 Scost. lineari ed >6 > PART NUMER angolari per grado " f " inear and angular ā1ā ā0ā30' ā0ā20' ā0ā10' tolerances for " f " grade ā0.05 ā0.1 ā0.15 IPT06E10-7SSR FOGIO SHEET ODIE ODE PREVIOUS ODE File:IPT06E10-7SSR ODIE PREEDENTE : ONTROATO HEKED APPROVED APPROVATO REV. REV. inear and angular tolerances for " f " grade SAE SERIES ODE WEIGHT Tolleranze generali General tolerances >6 > ā0.05 ā0.1 ā0.15 SHEET SAE SERIES ODE IPT -SE Series ayonet ock onnectors Glenair IPT SE Series ayonet-ock High Performance rimp ontact (MI-DT Serie I) Styles and lasses onnector / ackshell lass 1 ackshells and able lamps 5 ompression 6 7 Ring 8 Grommet or Gland Shell Styles A ase mse A mse ASE IPT 00 SE D se gse Disegno eseguito con AD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - a ditta tutela i propri diritti sui disegni a termine di legge. D SE E F MATERIAE Alluminio 2011-T3 sec. ST003 DESRIZIONE FOGIO ODIE 1 / USTODIA A SIZE A3 MODIFI. nā / INDIE nā / INDIE Spigoli interni / esterni privi di indicazione DISEGNATO ONTROATO APPROVATO ATTENZIONE: PESO g Scost. lineari ed angolari per grado " f " AREA cm² ISO fh GRUPPO Ra (µm) SAA 2:1 IPT-SE PART NUMER E REV. F IPT 01 SE ASE...N0 IPT 02 SE No accessory threads IPT 02 PP ulkhead Feedthrough A A 1 ase mse 8 A A SE...SR E D E GSE F D F se gse 1 / A3 MODIFI. MATERIAE Alluminio 2011-T3 sec. ST003 DESRIZIONE FOGIO ODIE 1 / USTODIA A SIZE A3 MODIFI. nā / INDIE nā / INDIE Spigoli interni / esterni privi di indicazione DISEGNATO 2:1 ONTROATO APPROVATO Disegno eseguito con AD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - a ditta tutela i propri diritti sui disegni a termine di legge. D E F ATTENZIONE: PESO g AREA cm² ISO fh GRUPPO Ra (µm) SAA 2:1 IPT-SE PART NUMER REV. Disegno eseguito con AD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - a ditta tutela i propri diritti sui disegni a termine di legge. D E F IPT 06 SE IPT 07 SE A ase mse A MSE IPT 08 SE D se gse Disegno eseguito con AD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - a ditta tutela i propri diritti sui disegni a termine di legge. D E F F 2015 Glenair, Inc. U.S. AGE ode USTODIA A SIZE 20 1 / A3 MODIFI. 2:1 IPT-SE E -4

11 Glenair IPT SE Series ayonet-ock High Performance rimp ontact (MI-DT Serie I) Technical Data IPT-SE Series ayonet ock onnectors Service Rating lass Operating voltage A Operating voltage D Test voltage A I II Potential Drop ontact size Test current Potential drop A 25 mv A 21 mv Kilovolts A RMS 2 1 IT IIA IA IIT IA Actual min. flashover Ser.I IT Recommended test Ser. I IIA Actual min. flashover Ser. II IIT Recommended test Ser. II Altitude Pressure in Thousands of feet 2015 Glenair, Inc. U.S. AGE ode

12 IPT -SE Series ayonet ock onnectors Glenair IPT SE Series ayonet-ock High Performance rimp ontact (MI-DT Serie I) How to Order Part Number reakdown onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads 01 - In-ine able onnector with Accessory Threads 02 - ox Mounting Receptacle with No Accessory Threads 02PP - Through ulkhead Receptacle 06 - Straight Plug onnector with Accessory Threads 07 - Rear ox Mount Jam Nut Receptacle ackshell Shell Size and Arrangement Mod ode Options F6 - lack Electro-deposited Paint (RoHs) F7 - lack Zn-Ni Plating (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) (Omit for Standard Finish - ad/olive Drab- Not RoHS) Polychloroprene ontact Gender P - Pin S - Socket Alternate Rotation Omit for Normal IPT G 06 SE P X SR XX SIPT Silicone Environmental lass ASE - SE - SE...SR - GSE - MSE Indicates that the Supplied onnector/ackshell Assembly includes a Wire Sealing Grommet. ASE...NO Indicates that the Supplied onnector, without ackshell, includes a Wire Sealing Grommet. Plug Grounding Fingers Omit for Standard Accessory Description* SR - able lamp and ushing *Not Used When Environmental lass ode Incorporates the ackshell Description See Individual atalog Pages for Details 2015 Glenair, Inc. U.S. AGE ode

13 VG95328 Part Number ross Reference IPT-SE Series ayonet ock onnectors asic Part Number ontact Arrangement Alternate Positions N - W - X - Y - Z VG95328 A S N onnector style P - Pin contacts S - Socket contacts Omit - For Style P ulkhead Feed Thrus VG95328 onnectors ross Reference MS GENAIR VG95328 A MS 3120 E IPT 00 SE VG95328 MS 3120 F IPT 00 SE SR VG95328 MS 3122 E IPT 02 SE VG95328 D MS 3124 E IPT 07 SE VG95328 E MS 3124 F IPT 07 SE SR VG95328 F N.A. N. A. VG95328 G N.A. N. A. VG95328 H MS 3112 E IPT 02 E VG95328 J N.A. IPT 06 GSE VG95328 K MS 3126 F IPT 06 SE SR VG95328 N.A. N. A. VG95328 M N.A. IPT G 06 MSE VG95328 N N.A. IPT G 06 ASE VG95328 P MS 3119 E IPT 02 PP VG95328 R N.A. IPT 00 MSE VG95328 S N.A. IPT 07 GSE VG95328 T N.A. IPT 07 MSE VG95328 U N.A. N. A. VG95328 V N.A. IPT G 06 GSE VG95328 W N.A. N. A. VG95328 Accessories ross Reference MS GENAIR VG95328 Z1 A MS 3181 IPT 3181 VG95328 Z1 N.A. IPT 3181 F VG95328 Z1 N.A. N. A. VG95328 Z2 A MS 3180 IPT 3180 VG95328 Z2 N.A. IPT 3180 F VG95328 Z2 N.A. N. A. VG95328 Z3 N.A. IPT 3181 NF VG95328 T07 A N.A VG95328 T07 N.A. N. A. VG95328 T07 MS 3115 IPT 3115 VG95328 T07 D N.A. N. A Glenair, Inc. U.S. AGE ode

14 IPT -SE Series ayonet ock onnectors Glenair IPT SE Series ayonet-ock High Performance rimp ontact (MI-DT Serie I) Materials and Finishes OMPONENT Shells MATERIAS MATERIA Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel oupling Pins Stainless Steel Spring s (Temperature Range) High Insulation Synthetic Rubber (Polychloroprene): -55 /+125 (Silicone): -55 /+200 ontacts opper Alloy with Gold Plating Over Nickel Property STANDARD MATERIA & FINISH OPTIONS RoHS Alum/lack Non onductive Alum/lack onductive Alum/Electroless Nickel Unplated/Marine ronze Not RoHS Alum/admium Olive Drab F6 F7 F11 M G3 Temperature Range Salt Spray Hours Electrical onductivity NO Good Very Good Very Good Very Good TAE II: MODIFIATION ODES ONTAT OPTIONS 0 F6 F7 F11 M Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) onductive metal shells and plating provide a reliable ground plane for EMI applications when connectors are combined with appropriate shield termination backshells. Ground springs are also available in plug versions to further enhance EM. Shells are keyed with five total alternate key positions. s may also be clocked for additional polarization protection. The connectors are temperature rated from -55 to +125 / High performance crimp contacts facilitate rapid assembly and repair Glenair, Inc. U.S. AGE ode

15 rimp ontact Dimensions Pin and Socket IPT-SE Series ayonet ock onnectors ø /-0.05 ø /-0 ø /-0.05 ø / Min ± ±0.1 ø /-0.05 ø / ±0.15 Size 20 Pin ontact P ø /-0.1 ø / ± ±0.1 ø /-0.1 ø / ±0.2 Size 16 Pin ontact P ø /-0.05 ø / Min ± ±0.15 ø /-0.05 ø /-0 ø /-0.05 ø / ±0.25 Size 20 Socket ontact S 7.37 Min. ø1.05 Min. ø /-0.05 ø / ± ±0.15 ø /-0.1 ø /-0.1 ø / ±0.2 Size 16 Socket ontact S 7.37 Min. ø /-0.05 ø /-0.07 For Tools see page D Glenair, Inc. U.S. AGE ode

16 IPT -SE Series ayonet ock onnectors Glenair IPT SE Series Arrangement Tables and Sealing Plugs D1 2 Sealing Plugs for Socket avity 1 D2 Arrangement Tables SEAING PUG DIMENSIONS Part Number D1 D2 1 2 ±0.1 ±0.2 ±0.1 ±0.3 olor DIN Red DIN lue Arrangement l. Isol. Rating Dim. contact size I 2 8-3A I I I I I II I II I I I II I I II I II I I II I I 61 α α α Arrangement Degrees W X Y Z A a a Not for new design α Normal Position Alternate Position with Pin ontacts Alternate Position with Socket ontacts Normal Normal position position Alternate Alternate position position with pin with contacts pin contacts Alternate Alternate position position with socket with contacts socket contacts 2015 Glenair, Inc. U.S. AGE ode

17 Glenair IPT SE Series Available Arrangements IPT-SE Series ayonet ock onnectors 2 ontacts 3 ontacts A A Arrangement: 8-2 ontact Size: 20 Service Rating: l Arrangement: 8-3A ontact Size: Service Rating: l l ll 4 ontacts 5 ontacts E D A Arrangement: 8-4 Arrangement: 14-5 ontact Size: 20 ontact Size: 16 Service Rating: 6 ontacts F E l A D Service Rating: 7 ontacts F E ll A 10-7P G D Arrangement: 10-6 Arrangement: 10-7 ontact Size: 20 ontact Size: 20 Service Rating: l Service Rating: l 8 ontacts 10 ontacts Arrangement: 16-8 Arrangement: ontact Size: 16 ontact Size: 20 Service Rating: ll Service Rating: l 11 ontacts 12 ontacts Arrangement: ontact Size: 16 Service Rating: ll Arrangement: ontact Size: 8-20, 4-16 Service Rating: l 15 ontacts A K M J R N P H D G E F 16 ontacts Arrangement: ontact Size: 14-20, 1-16 Service Rating: l Arrangement: ontact Size: 16 Service Rating: ll ontact egend Glenair, Inc. U.S. AGE ode

18 l j IPT -SE Series ayonet ock onnectors Glenair IPT SE Series Available Arrangements W 19 ontacts 21 ontacts V U X Arrangement: ontact Size: 20 Service Rating: l Arrangement: ontact Size: 16 Service Rating: ll P a b U D 23 ontacts 26 ontacts Y c V W F E Arrangement: ontact Size: 22-20, 1-16 Service Rating: l Arrangement: ontact Size: 20 Service Rating: l 32 ontacts 39 ontacts S R P T U N h g f M V r e W q _ X k_ Y A m K J Z n c_ p_ d a b H D E G F Arrangement: ontact Size: 20 Service Rating: l Arrangement: ontact Size: 37-20, 2-16 Service Rating: l 41 ontacts Arrangement: ontact Size: 20 Service Rating: l 55 ontacts Arrangement: ontact Size: 20 Service Rating: l 61 ontacts Arrangement: ontact Size: 20 Service Rating: l ontact egend Glenair, Inc. U.S. AGE ode

19 Glenair IPT SE Series ayonet-ock High Performance rimp (MI Type) Fastener Height Requirements and Panel utout Dimensions IPT-SE Series ayonet ock onnectors For front panel mount square flange connectors (00) the A dimension indicates the measured maximums that mounting hardware can stand proud from the connector flange before it will interfere with connector mating. For rear box mount square flange connectors (02) the same A column maximum dimesions apply, but in this case the measurement taken includes the thickness of the panel wall or box (so the mounting hardware needs to be correspondingly shorter). olumn A1 defines the max dimensions for the bulkhead feedthrough (02PP) before mounting hardware interferes with mating. A Front Panel Mounting Maximum Screw Protrusion A A1 Rear Panel Mounting Feed Through Mounting Ø ØD (X4) Shell Size A max Panel thickness and panel cutout A1 max Front Panel Ø +0.2 / -0 Rear Panel ±0.1 ØD ± A 07 (D) Shell Size Panel thickness and panel cutout for Jam Nut connectors A min - max Ø +0.2 / -0 Ø +0 / (D) 2015 Glenair, Inc. U.S. AGE ode

20 IPT -SE Series ayonet ock onnectors IPT 00 ASE Front Panel Mount Square Flange Receptacle with ackshell Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 00 ASE P Z XX SIPT Environmental lass ASE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone 9.5 ØM H E F D G Application Notes 1. Wall mounting receptacle with accessory threads. Through mounting holes. 2. onnector lass ASE (environmental ). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

21 IPT 00 ASE Front Panel Mount Square Flange Receptacle with ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size D E min. F Thread in inches G ±0.4 H ±0.1 ØM UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

22 IPT -SE Series ayonet ock onnectors IPT 00 SE Front Panel Mount Square Flange Receptacle with General Duty ackshell Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 00 SE P Z XX SIPT Environmental lass SE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone 2 3 ØM H D1 1 G Application Notes 1. Wall mounting receptacle with accessory threads includes sealing grommet and backshell for use with individual wires. Also includes general duty backshell for the attachment of various backend connector accessories; through mounting holes. 2. onnector lass SE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

23 IPT 00 SE Front Panel Mount Square Flange Receptacle with General Duty ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell Size D1 Max G ±0.4 H ±0.1 ØM TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

24 IPT -SE Series ayonet ock onnectors IPT 00 ASE...N0 Front Panel Mount Square Flange Receptacle without ackshell Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 00 ASE P Z N0 XX SIPT Environmental lass ASE...N0 - Environmental ontact Gender P - Pin S - Socket No ackshell of Any Kind Supplied Silicone ØM H F G Application Notes 1. Wall mounting receptacle with accessory threads in the rear flange for the backshell and accessories attachment; through mounting holes. 2. onnector lass ASE...NO (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

25 IPT 00 ASE...N0 Front Panel Mount Square Flange Receptacle without ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size G ±0.4 H ±0.1 ØM F Thread in inches UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

26 IPT -SE Series ayonet ock onnectors IPT 00 SE...SR Front Panel Mount Square Flange Receptacle with ackshell, able lamp and ushing Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 00 SE P Z SR XX SIPT Environmental lass SE...SR - Environmental ontact Gender P - Pin S - Socket able lamp with ushing Silicone 2 3 ØM H D1 D2 H1 1 3 G F Application Notes 1. Wall mounting receptacle with accessory threads with cable clamp and bushing for cable protection; through mounting holes. 2. onnector lass SE...SR (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

27 IPT 00 SE...SR Front Panel Mount Square Flange Receptacle with ackshell, able lamp and ushing IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size G ±0.4 H ±0.1 ØM D1 D F (*) ±0.75 H1 ± , , , , , , , (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

28 IPT -SE Series ayonet ock onnectors IPT 00 GSE Front Panel Mount Square Flange Receptacle with Shrink oot ackshell Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 00 GSE P Z XX SIPT Environmental lass GSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone A ØM H D 3,5 G Application Notes 1 Wall mounting receptacle with accessory threads, sealing grommet and backshell for heat shrink boot; through mounting holes. 2. onnector/ackshell lass GSE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

29 IPT 00 GSE Front Panel Mount Square Flange Receptacle with Shrink oot ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size A ± D G ±0.4 H ±0.1 ØM TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

30 IPT -SE Series ayonet ock onnectors IPT 00 MSE Front Panel Mount Square Flange Receptacle with ackshell for EMI Shield Termination and Shrink oot Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 00 MSE P Z XX SIPT Environmental lass MSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone K ØM H A G Application Notes 1. Wall mounting receptacle with accessory threads, backshell for terminating shielded cable, suitable for heat shrink boots; through mounting holes. 2. onnector/ackshell lass MSE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

31 IPT 00 MSE Front Panel Mount Square Flange Receptacle with ackshell for EMI Shield Termination and Shrink oot IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size A min. G ±0.4 H ±0.1 ØM K Key TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

32 IPT -SE Series ayonet ock onnectors IPT 01 ASE In-ine able onnector with ackshell Polychloroprene onnector Shell Styles 01 -In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 01 ASE P Z XX SIPT Environmental lass ASE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone ØG 9.5 E F D Application Notes 1. In-ine cable connector, with backshell for the attachment of additional accessories. 2. onnector lass ASE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

33 IPT 01 ASE In-ine able onnector with ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size D E min. F Thread in inches ØG ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

34 IPT -SE Series ayonet ock onnectors IPT 01 SE In-ine able onnector with General Duty ackshell Polychloroprene onnector Shell Styles 01 -In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 01 SE P Z XX SIPT Environmental lass SE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone 1 ØG 2 3 ØD Application Notes 1. In-ine cable connector includes sealing grommet and backshell for use with individual wires. 2. onnector lass SE. Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

35 IPT 01 SE In-ine able onnector with General Duty ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØD ØG ± TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

36 IPT -SE Series ayonet ock onnectors IPT 01 ASE...N0 In-ine able onnector Polychloroprene onnector Shell Styles 01 -In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 ASE P Z N0 XX SIPT Environmental lass ASE...NO - Environmental ontact Gender P - Pin S - Socket No ackshell of Any Kind Supplied Silicone ØG F Application Notes 1. In-ine cable connector threaded in the rear body for the attachment of additional accessories. 2. onnector lass ASE...NO (environmental ). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

37 IPT 01 ASE...N0 In-ine able onnector IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØG ±0.2 F Thread in inches UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

38 IPT -SE Series ayonet ock onnectors IPT 01 SE...SR In-ine able onnector with ackshell, able lamp and ushing Polychloroprene onnector Shell Styles 01 - In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 SE P Z SR XX SIPT Environmental lass SE...SR - Environmental ontact Gender P - Pin S - Socket able lamp with ushing Silicone N D1 D3 H 3 1 ØG F Application Notes 1. In-ine cable connector with sealing grommet, cable clamp and bushing for cable protection. 2. onnector lass SE...SR (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

39 IPT 01 SE...SR In-ine able onnector with ackshell, able lamp and ushing IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size N Thread D1 D ØG ±0.2 H ± UN UN UN , UN , UN ,3 F (*) ± UN , UN , UN , UN ,3 (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

40 IPT -SE Series ayonet ock onnectors IPT 01 GSE In-ine able onnector with Shrink oot ackshell Polychloroprene onnector Shell Styles 01 - In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 01 GSE P Z XX SIPT Environmental lass GSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone 3.5±0.2 A ØG Ø Ø ØD Application Notes 1. In-ine cable connector with sealing grommet and backshell for heat shrink boot. 2. onnector/ackshell lass GSE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

41 IPT 01 GSE In-ine able onnector with Shrink oot ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size A ±0.1 Ø Ø ØD ØG ±0.2 TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

42 IPT -SE Series ayonet ock onnectors IPT 01 MSE In-ine able onnector with ackshell for EMI Shield Termination and Shrink oot Polychloroprene onnector Shell Styles 01 - In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 01 MSE P Z XX SIPT Environmental lass MSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone K 2 D3 D5 D4 D2 D ØG Application Notes 1. In-ine cable connector with sealing grommet and backshell for heat shrink boot. 2. onnector/ackshell lass MSE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

43 IPT 01 MSE In-ine able onnector with ackshell for EMI Shield Termination and Shrink oot IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size K Key ØG ±0.2 D D3 min. D4 D5 D min M14x M16x M20x M23x M26x M30x M32x M36x M39x TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

44 IPT -SE Series ayonet ock onnectors IPT 02 SE ox Mounting Square Flange Receptacle Polychloroprene onnector Shell Styles 02 - ox Mounting Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 02 SE P Z XX SIPT Environmental lass SE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone 2 3 ØM H D G Application Notes 1. ox mounting receptacle with through mounting holes; no rear accessory threads. 2. onnector lass SE (environmental ). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

45 IPT 02 SE ox Mounting Square Flange Receptacle IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size G ±0.4 H ±0.1 ØM D TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

46 IPT -SE Series ayonet ock onnectors IPT 02 PP Through ulkhead Receptacle Polychloroprene onnector Shell Styles 02 - ox Mounting Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 02 PP P/S Z XX SIPT Environmental lass PP - Through ulkhead Solid ontact Gender P/S - Pin and Socket Mod. ode Options See Table II Silicone 2 3 ØM H Socket Side Pin Side G 1 Application Notes 1 Through bulkhead receptacle with solid feedthrough contacts. 2. Through mounting holes. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

47 IPT 02 PP Through ulkhead Receptacle IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size G ±0.4 H ±0.1 ØM ± 0.2 TAE II: MODIFIATION ODES F6 F7 F11 M FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

48 IPT -SE Series ayonet ock onnectors IPT 06 ASE Straight Plug onnector with ackshell to Accommodate MS3057 able lamp (Not Included) Polychloroprene onnector Shell Styles 06 - Straight Plug onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT G 06 ASE P Z XX SIPT Grounding Fingers (Omit for Strandard) Environmental lass ASE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone 10 Min. D3 D2 ØD1 Application Notes 1 Straight plug connector with accessory threads. 2. onnector lass ASE (environmental). 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

49 IPT 06 ASE Straight Plug onnector with ackshell to Accommodate MS3057 able lamp (Not Included) IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØD1 ±0.2 D2 D3 Min UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

50 IPT -SE Series ayonet ock onnectors IPT 06 SE Straight Plug onnector with General Duty ackshell Polychloroprene onnector Shell Styles 06 - Straight Plug onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT G 06 SE P Z XX SIPT Grounding Fingers (Omit for Strandard) Environmental lass SE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone A ØG ØD Application Notes 1. Straight plug connector includes sealing grommet and backshell for use with individual wires. 2. onnector lass SE (environmental). 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

51 IPT 06 SE Straight Plug onnector with General Duty ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size A ±0.5 ØD ØG ± TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

52 IPT -SE Series ayonet ock onnectors IPT 06 ASE...N0 Straight Plug onnector without ackshell Polychloroprene onnector Shell Styles 06 - Straight Plug onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 ASE P Z N0 XX SIPT Grounding Fingers (Omit for Strandard) Environmental lass ASE...N0 -Environmental ontact Gender P - Pin S - Socket No ackshell of Any Kind Supplied Silicone A ØG E Application Notes 1. Straight plug connector without backshell. 2. onnector lass ASE...NO (environmental) 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

53 IPT 06 ASE...N0 Straight Plug onnector without ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size A ±0.5 ØG ±0.2 ±0.2 E UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

54 IPT -SE Series ayonet ock onnectors IPT 06 SE...SR Straight Plug onnector with ackshell, able lamp and ushing Polychloroprene onnector Shell Styles 06 - Straight Plug onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 SE P Z SR XX SIPT Grounding Fingers (Omit for Strandard) Environmental lass SE...SR - Environmental ontact Gender P - Pin S - Socket able lamp with ushing Silicone 3 D3 H ØD1 F Application Notes 1. Straight plug with cable clamp and bushing for cable protection. 2. onnector lass SE...SR (environmental). 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

55 IPT 06 SE...SR Straight Plug onnector with ackshell, able lamp and ushing IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØD1 ±0.2 D H ± , , ,3 F (*) ± , , , ,3 (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

56 IPT -SE Series ayonet ock onnectors IPT 06 GSE Straight Plug onnector with Shrink oot ackshell Polychloroprene onnector Shell Styles 06 - Straight Plug onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT G 06 GSE P Z XX SIPT Grounding Fingers (Omit for Strandard) Environmental lass GSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone 2 D3 D ØD1 Application Notes 1. Straight plug connector with shrink boot backshell. 2. onnector lass GSE (environmental). 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

57 IPT 06 GSE Straight Plug onnector with Shrink oot ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØD1 ±0.2 D D ± 0.5 TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

58 IPT -SE Series ayonet ock onnectors IPT 06 MSE Straight Plug onnector with ackshell Suitable for EMI Shield Termination and Heat Shrink oot Polychloroprene onnector Shell Styles 06 - Straight Plug onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT G 06 MSE P Z XX SIPT Grounding Fingers (Omit for Strandard) Environmental lass MSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone ±0.2 2 D3 D5 D4 D2 D6 1 3 ØD1 Application Notes 1. Straight plug connector with shrink boot backshell. 2. onnector lass MSE (environmental). 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

59 IPT 06 MSE Straight Plug onnector with ackshell Suitable for EMI Shield Termination and Heat Shrink oot IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØD1 ±0.2 D D3 Min. D4 D5 D M14 x M16 x M20 x M23 x M26 x M30 x M32 x M36 x M39 x Min. TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

60 IPT -SE Series ayonet ock onnectors IPT 07 SE Jam Nut Receptacle with General Duty ackshell Polychloroprene onnector Shell Styles 07 - Jam Nut Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 07 SE P Z XX SIPT Environmental lass SE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone D3 D1 Ø3 D2 S Application Notes 1 Jam nut receptacle includes sealing grommet and backshell for use with individual wires. 2 onnector lass SE (environmental). Wire sealing grommet supplied. 3 Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

61 IPT 07 SE Jam Nut Receptacle with General Duty ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size Ø D1 D2 Min. D Min. 4 ± 0.5 S ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

62 IPT -SE Series ayonet ock onnectors IPT 07 SE...SR Jam Nut Receptacle onnector and ackshell with able lamp and ushing Polychloroprene onnector Shell Styles 07 - Jam Nut Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) G Mod. ode Options See Table II IPT 07 SE P Z SR XX SIPT Environmental lass SE...SR - Environmental ontact Gender P - Pin S - Socket able lamp with ushing Silicone D4 D1 Ø3 D3 H D2 S Application Notes 1. Jam nut receptacle connector with shrink boot backshell. 2. onnector/ackshell lass SE...SR (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

63 IPT 07 SE...SR Jam Nut Receptacle onnector and ackshell with able lamp and ushing IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size Ø D1 D2 Min. D D H ± Min. 4 ±0.15 S ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

64 IPT -SE Series ayonet ock onnectors IPT 07 GSE Jam Nut Receptacle with Shrink oot ackshell Polychloroprene onnector Shell Styles 07 - Jam Nut Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 07 GSE P Z XX SIPT Environmental lass GSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone D4 D1 Ø3 D3 D2 S Application Notes 1. Jam nut receptacle connector with shrink boot backshell. 2. onnector/ackshell lass GSE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

65 IPT 07 GSE Jam Nut Receptacle with Shrink oot ackshell IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell size Ø D1 D D D Min. 4 ± ± ± 0.2 S ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

66 IPT -SE Series ayonet ock onnectors IPT 07 MSE Jam Nut Receptacle with ackshell for EMI Shield Termination and Shrink oot Polychloroprene onnector Shell Styles 07 - Jam Nut Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 07 MSE P Z XX SIPT Environmental lass MSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone D D1 3 D3 D5 D4 D2 S Application Notes 1. Jam nut receptacle with EMI shield termination / shrink boot backshell 2. onnector lass MSE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

67 IPT 07 MSE Jam Nut Receptacle with ackshell for EMI Shield Termination and Shrink oot IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell Size Ø D1 D Min. 6 ± ± S ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF For backshell dimensions D2, D3, D4, D5, 1, 2 and 3 please refer to IPT 06 MSE TAE I: DIMENSIONS at Page -53 TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

68 IPT -SE Series ayonet ock onnectors IPT 08 MSE 90 Plug onnector with ackshell for EMI Shield Termination and Shrink oot Polychloroprene onnector Shell Styles Plug connector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT G 08 MSE P Z XX SIPT Grounding Fingers (Omit for Strandard) Environmental lass MSE - Environmental ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone ØG Key 18 Only Size 8 M H ØD Ø ØA Ø ØA Application Notes 1. Straight plug connector with 90 ackshell. 2. onnector lass MSE (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

69 IPT 08 MSE 90 Plug onnector with ackshell for EMI Shield Termination and Shrink oot IPT-SE Series ayonet ock onnectors TAE I: DIMENSIONS Shell Size ØA ± 0.2 Ø ± 0.2 Ø +0.1/0 ØD 0/-0.2 M ± 0.5 ØG ±0.2 H TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

70 IPT -SE Series ayonet ock onnectors Glenair Italia S.p.A. Via del avoro, Quarto Inferiore Granarolo dell Emilia - Italy 2015 Glenair, Inc. U.S. AGE ode Tel Fax info@glenair.it

71 Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) IPT Series ayonet ock onnectors IPT Series General Duty Solder and rimp ontact MI-DT Serie I ayonet onnector Section ayonet-ock Signal onnectors (MI-DT Serie I) Product ine Overview ayonet-ock Signal onnectors (MI-DT Serie I) Styles and lasses ; -6 How to Order Part Number reakdown -7 ross Section -8 Technical data -9 Materials and Finishes -10 ontact Dimensions -11 Arrangement Tables and Alternate o Position -12 Alternate Key Positions -13 Fastener Height Requirements and Panel utout Dimensions -14 Available Arrangements -15 ; -17 IPT onnectors onfigurations Glenair, Inc. U.S. AGE ode

72 IPT Series ayonet ock onnectors Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Product ine Overview An Economical onnector Solution for General Electronics, Industrial ontrols, Instrumentation and Military Vehicles Harsh Application Environments The Glenair Series IPT ayonet-ock Signal onnector is ideally suited for all interconnect applications that require a general-duty connector equipped with solder cup contacts and one-piece rubber insert. The bayonet coupling mechanism provides fast and easy mating, especially when the connector is situated in an awkward or hard to reach location. The connector s high resistance to vibration and shock provides foolproof performance in even the most rigorous application environments. Environmental protection up to IP67 levels provides additional reliability and the flexibility to specify these rugged connectors in harsh applications such as machine tools and factory automation. Supplied solder cup contacts are gold-plated over nickel. Optional crimp contacts are available, however the Glenair IPT SE series, with its industry standard rear-release crimp contacts and retention clip mechanism is better suited for all high-performance applications that require crimp contacts. Sealing members in the IPT series are made from resilient neoprene rubber. The standard insert material is synthetic rubber. There are 40 different size 12, size 16 and size 20 insert arrangements and nine shell sizes. Intermateability The Series IPT onnector is interchangeable and intermateable with the wide range of industry-standard bayonet connectors designed around MI-DT Series I and/or qualified to VG 95328, including VEAM VPT, Amphenol PT, Amphenol imited G2G, and ITT annon KPT. Solder up Version with Optional rimp ontacts Resilient Environmental s Fast, Easy ayonet oupling 40 Power and Signal Arrangements All Shell Styles: Plug, Square Flange, Jam-Nut, etc. High Shock and Vibration Resistance Pin ounts from 2 to 61; Size #12, #16 and #20 ontacts Audible and Visual oupling Indicators Keyed Polarization 2015 Glenair, Inc. U.S. AGE ode

73 Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Product ine Overview IPT Series ayonet ock onnectors MI The Glenair IPT miniature bayonet-lock connector series is based on the MI-DT Series I standard, and shares the same insert arrangements, shell dimensions, supported contacts and electrical performance ratings as MI-DT and VG The MI-DT type 3-point bayonet coupling mechanism provides easy mating and positive locking resistance to vibration, shock, and other connector de-coupling forces in general duty and environmental interconnect systems such as military and commercial aircraft, medical equipment, industrial controls, factory robotics, intrumentation and other general electronic applications. omponent Materials IPT connectors are available in aluminum alloy and marine bronze are supplied with a range of popular and RoHs compatible shell plating finishes. Most styles are available in either a basic (A) version as well as an (E) version that ships with a wire sealing grommet for additional environmental protection. Our F6,F7 and F11 platings are RoHs compliant. EMI and Environmental Applications IPT Series connectors are perfectly suited for use in rugged applications where EE compliance directives for electromagnetical compatibility is required. A complete range of EMI shield termination accessories are available for both overall as well as individual wire shields. Equipped with the appropriate backshells and environmental sealing, the connectors are submersible for 48 hours up to a depth of two meters. onnector Accessories Many of the IPT Series connectors come standard already paired with selected backshell accessories for most application requirements. See the accessory descriptions on the opposite page for more information. A full range of additional connector accessories including dustcaps and EMI gaskets are also available. Please contact the factory for additional information or any of our worldwide sales and engineering facilities. Glenair s website, also has complete information on these products, as well as other ruggedized power and signal connectors Glenair, Inc. U.S. AGE ode

74 IPT Series ayonet ock onnectors Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Styles and lasses onnector / ackshell lass ackshells and able lamps ompression Ring Grommet or Gland Shell Styles A A...N0 IPT00 A...PG IPT01 A...PH A...PHM A...PHM_EMI67 Only for IPT06 IPT06 IPT06 A...AT A...SR E E...SR G IPT02A No accessory threads IPT02PP IPT02Y No accessory threads J IPT07A No accessory threads M IPT07Y No accessory threads W 2015 Glenair, Inc. U.S. AGE ode

75 Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Styles and lasses IPT Series ayonet ock onnectors onnector / ackshell lass ackshells and able lamps ompression Ring Grommet or Gland Shell Styles E IPT07E AM A...PHM IPT08 EM M IPT26A 2015 Glenair, Inc. U.S. AGE ode

76 IPT Series ayonet ock onnectors Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Styles and lasses Glenair IPT Series products are typically supplied in termination assemblies that include the chosen style of connector together with a specific backshell accessory. A: For general-duty applications. This non-environmental connector-backshell assembly is supplied with a general-duty backshell for the attachment of additional accessories such as MS 3057 cable clamps (ordered separately). Non-environmental: no grommet supplied. A...N0 For general-duty applications. This non-environmental connector is supplied with rear threads for the attachment of additional backshell (ordered separately). A...PG: Straight plug with PG threaded backshell for attachment of PG cable glands in compliance with DIN (not included). A...PH: Straight plug with backshell and plastic cable glands. A...PHM: onnector with quick and easy to assemble PHM cable gland backshell. Supplied with different diameter sleeves to accommodate varying cable sizes. A...SR: Same as class A, but with cable clamp and bushing for cable protection. E: For general-duty environmental applications using individual wires. Environmental sealing is provided through an individual wire sealing grommet in the connector. No cable clamp supplied. E...SR: Same as class E, but with cable clamp and bushing for cable protection. G: Plug with straight backshell for heatshrink boot. J: Same as class W, but with cable clamp for improved strain relief. M: Plug with removable backshell for screen termination and heatshrink boot. W: ong backshell to ease assembly. Incorporates metal sleeve and gland seal to provide overall cable sealing for improved environmental protection. No cable clamp provided. AM: Non-environmental with 90 backshell. EM: Environmental (rear wire sealing grommet) 90 backshell with cable clamp. A...PHM EMI67: Watertight connector and PHM cable gland backshell, resistant up to IP67, suitable for EMI shielded cables. Supplied with different diameter sleeves to accomodate varying cable diameters Glenair, Inc. U.S. AGE ode

77 Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) How to Order Part Number reakdown IPT Series ayonet ock onnectors Environmental lass A, AM - Indicates the Supplied onnector/ackshell Assembly Does Not Include a Wire Sealing Grommet E, G, M, EM - Indicates the Supplied onnector/ ackshell Assembly Includes a Wire Sealing Grommet W, J - Indicates the Supplied onnector/ackshell Assembly Includes an Overall able Sealing Gland Accessory Description* PG - ackshell for Attachment of PG able Gland PH - ackshell with Plastic PG able Gland PHM - ackshell with PHM able Gland PHM-EMI67 - EMI ackshell with PHM able Gland and up to IP67 evel Environmental Sealing SR - able lamp and ushing N0 - No ackshell NO - No ackshell NOG - Supplied with Grommet and ompression Ring, No backshell N0 AT - Arctic oupling Nut Supplied w/out ackshell *Not Used When Environmental lass ode Incorporates the ackshell Description See Individual atalog Pages for Details Polychloroprene IPT Alternate Key Position*,, E, F (Omit for N) Alternate Rotation (Omit for Normal) ontact Type - rimp (Omit for Solder up) G 06 A P X SR XX SIPT Silicone Plug Grounding Fingers Omit for Standard Shell Size and Arrangement ontact Gender P - Pin S - Socket onnector Shell Styles 00 - Wall Mounting Receptacle with Accessory Threads 01 - In-ine able onnector with Accessory Threads 02 - ox Mounting Receptacle with No Accessory Threads 02PP - Through ulkhead Receptacle 06 - Straight Plug onnector with Accessory Threads 07 - Rear ox Mount Jam Nut Receptacle ackshell 26 - ox Mount Square Flange Plug onnector Mod ode Options F6 - lack Electro-deposited Paint (RoHs) F7 - lack Zn-Ni Plating (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) (Omit for Standard Finish - ad/olive Drab) *For Alternate Key Positions (Page -13), please contact the factory Glenair, Inc. U.S. AGE ode

78 IPT Series ayonet ock onnectors Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) ross Section Flange ackshell ompression Ring Pin ontact oupling Nut nut ackshell Shell Grommet Grommet Gasket Socket ontact ompression Ring The Glenair IPT miniature bayonet-lock connector series features a 3 point bayonet coupling mating interface with stainless steel coupling pins for advanced durability. Resilient inserts provide outstanding dielectric performance and environmental protection. Individual wire sealing grommets elevate the environmental protection rating up to IP67. onductive metal shells and plating provide a reliable ground plane for EMI applications when connectors are combined with appropriate shield termination backshells. Ground springs are also available in plug versions to further enhance EM. Shells are keyed with five total alternate key positions. s may also be clocked for additional polarization protection. The connectors are temperature rated from -55 to +125 (Polychloroprene) and -55 to +200 (Silicone). Standard solder cup contact versions enable direct attachment of wire without the use of specialized crimp tools Glenair, Inc. U.S. AGE ode

79 Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Technical Data IPT Series ayonet ock onnectors Service Rating lass Operating voltage A Operating voltage D Test voltage A I II Potential Drop ontact size Test current Potential drop A 55 mv A 50 mv A 50 mv Kilovolts A RMS 2 1 IT IIA IA IIT IA Actual min. flashover Ser.I IT Recommended test Ser. I IIA Actual min. flashover Ser. II IIT Recommended test Ser. II Altitude Pressure in Thousands of feet 2015 Glenair, Inc. U.S. AGE ode

80 IPT Series ayonet ock onnectors Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Materials and Finishes OMPONENT Shells MATERIAS MATERIA Aluminum Alloy IAW QQ-A-591 Shells Stainless Steel oupling Pins Stainless Steel Spring s (Temperature Range) High Insulation Synthetic Rubber (hloroprene): -55 /+125 ontacts opper Alloy with Gold Plating Over Nickel Property STANDARD MATERIA & FINISH OPTIONS RoHS Alum/lack Non onductive Alum/lack onductive Alum/Electroless Nickel Unplated/Marine ronze Not RoHS Alum/admium Olive Drab F6 F7 F11 M G3 Temperature Range Salt Spray Hours Electical onductivity NO Good Very Good Very Good Very Good TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

81 Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) ontact Dimensions IPT Series ayonet ock onnectors IPT Solder up ontacts OA ontact size Ø A AWG wire section 20S / mmq 16S / mmq mmq IPT... Optional Male rimp ontacts Ø ØD ØA Ø P/N Size mmq AWG A D S ± ± ± ± S ± ± ± ± S 12S ± ± ± ±0.1 Shell Sizes 8 through 18 use the shorter contacts, designated as 16S and 20S IPT... Optional Female rimp ontacts ØD Ø ØA Ø P/N Size mmq AWG A D S ± ± ± ± S ± ± ± ± S 12S ± ± ± ±0.1 Shell Sizes 8 through 18 use the shorter contacts, designated as 16S and 20S 2015 Glenair, Inc. U.S. AGE ode

82 IPT Series ayonet ock onnectors Glenair IPT Series Arrangement Tables and Alternate Rotation Arrangement l. Isol. Dim. contact size Rating 20S 20 16S 16 12S I I 3 8-3A I I I II I I I I II I I I I A6 I I II I /3 II * I I I I ** I 2 ** 16-8 II I I I II I II * I I * II I I I I I 61 * onsult Factory ** These contacts accept 2,5 mm 2 wires. The reduced air/creepage distance may worsen the service rating. The max current rating is limited by the contact max current rating. See page -9. Supplied only for classes without grommet (non environmental) solder contacs only. Arrangement Degrees W X Y Z A A / ** α α α α α α Normal Alternate Position Alternate Position Normal positionnormal position Normal Alternate Position position position Alternate with pin with position contacts Pin ontacts Alternate with pin position contacts Alternate with position pin Socket Alternate contacts with ontacts socket position contacts Alternate with socket position conta 2015 Glenair, Inc. U.S. AGE ode

83 Glenair IPT Series Alternate Key Positions for S9522 F0017 IPT Series ayonet ock onnectors Datum is always taken from major key. In receptacles the major key always remains fixed. For the,, E and F orientantions, the three bayonet locations and associated minor key are rotated, in accordance with the tables below. orresponding key orientantions for a mating plug shell are always clockwise. Shell N Polarization Size α β χ δ ψ Shell Polarization Size α β χ δ ψ Shell E Polarization Size α β χ δ ψ Datum 3 Pins spaced 120 Shell Polarization Size α β χ δ ψ Shell F Polarization Size α β χ δ ψ Glenair, Inc. U.S. AGE ode

84 IPT Series ayonet ock onnectors Glenair IPT Series ayonet-ock Signal onnectors (MI-DT Serie I) Fastener Height Requirements and Panel utout Dimensions For front panel mount square flange connectors (00) the A dimension indicates the measured maximums that mounting hardware can stand proud from the connector flange before it will interfere with connector mating. For rear box mount square flange connectors (02) the same A column maximum dimesions apply, but in this case the measurement taken includes the thickness of the panel wall or box (so the mounting hardware needs to be correspondingly shorter). olumn A1 defines the max dimensions for the bulkhead feedthrough (02PP) before mounting hardware interferes with mating. Shell Size A max Panel thickness and panel cutout A1 max A Front Panel Mounting Front Panel Ø +0.2 / -0 Rear Panel Maximum Screw Protrusion A A1 Rear Panel Mounting ±0.1 ØD ± Feed Through Mounting Ø ØD (X4) A 07 (D) Shell Size Ø Panel thickness and panel cutout for Jam Nut connectors A min - max Ø +0.2 / / (D) 2015 Glenair, Inc. U.S. AGE ode

85 Glenair IPT Series Available Arrangements IPT Series ayonet ock onnectors 2 ontacts A A Arrangement: A 7 ontacts A A Arrangement: 10-7 A A ontact Size: ** ontact Size: 20 Service Rating: l ll l Service Rating: I 3 ontacts A A A D A D A 8 ontacts G A H F E D G A H A F E E D Arrangement: A ontact Size: Service Rating: l l l ll Arrangement: ontact Size: Service Rating: l l ll 4 ontacts A F E D D A 14-4 A E F D ontacts E F A G D Arrangement: Arrangement: ontact Size: ontact Size: 20 Service Rating: l l I Service Rating: l A 5 ontacts A E G A H F D E D G A H F E D G F H E D 11 ontacts H A G K J F E D Arrangement: 14-5 ontact Size: 16 Service Rating: ll Arrangement: ontact Size: 16 Service Rating: ll J A 6 ontacts F E A D G H F K E 5 D ontacts H A G J M K F E D J A H K M G F D E Arrangement: A6 ontact Size: Service Rating: l ll l Arrangement: /3 ontact Size: 8-20, Service Rating: l l ontact egend A D20 E 16 R 12 J F H J K N P M R A K M H G F N D E ** See page -12 A K M J R N P H D G E F 2015 Glenair, Inc. U.S. AGE ode

86 IPT Series ayonet ock onnectors Glenair IPT Series Available Arrangements W V X 14 ontacts 21 ontacts U Arrangement: * ontact Size: Service Rating: l l Arrangement: 22-21* ontact Size: 16 Service Rating: ll 15 ontacts A K M J R N P H D G E F Arrangement: ontact Size: 14-20, 1-16 Service Rating: l 23 ontacts Arrangement: ontact Size: 22-20, , 2-16 Service Rating: l l 16 ontacts 26 ontacts P a Y b c U D V E W F Arrangement: Arrangement: ontact Size: 16 ontact Size: 20 Service Rating: ll Service Rating: l 18 ontacts 32 ontacts W V h U g T S f R e P N M A Z Y D i E a b G c H d J Arrangement: ontact Size: 20 Service Rating: l Arrangement: ontact Size: , 6-12 Service Rating: l I 19 ontacts 36 ontacts Arrangement: ontact Size: 20 Service Rating: l Arrangement: ontact Size: 20 Service Rating: l ontact egend * onsult Factory 2015 Glenair, Inc. U.S. AGE ode

87 Glenair IPT Series Available Arrangements IPT Series ayonet ock onnectors 39 ontacts 55 ontacts Arrangement: 20-39* ontact Size: 37-20, 2-16 Service Rating: l Arrangement: ontact Size: 20 Service Rating: l 41 ontacts Arrangement: ontact Size: , Service Rating: l l 61 ontacts Arrangement: ontact Size: 20 Service Rating: l ontact egend * onsult Factory 2015 Glenair, Inc. U.S. AGE ode

88 IPT Series ayonet ock onnectors IPT 00 A Wall Mounting Receptacle with ackshell Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle Shell Size and Arrangement ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II IPT 00 A P Z XX SIPT Environmental lass A - Non Environmental ontact Gender P - Pin S - Socket Alternate Rotation W, X, Y, Z (Omit for Normal) Silicone 9.5 ØM H E F D G Application Notes 1. Wall mounting receptacle with backshell for the attachment of additional accessories; through mounting holes. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

89 IPT 00 A Wall Mounting Receptacle with ackshell IPT Series ayonet ock onnectors Shell size D E min. TAE I: DIMENSIONS F Thread in inches G ±0.4 H ±0.1 ØM UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

90 IPT Series ayonet ock onnectors IPT 00 A...N0 Wall Mounting Receptacle without ackshell Polychloroprene Environmental lass A...N0 - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) NO - No ackshell NOG - Supplied with Grommet and ompression Ring, No backshell IPT 00 A P Z N0 XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone ØM H F G Application Notes 1. Wall mounting receptacle without backshell with rear thread for the attachment of additional accessories; through mounting holes. 2. onnector lass A..N0 (non-environmental ) no grommet supplied. 3. onnector lass A..NOG (non-environmental ) supplied with grommet and compression ring, no backshell. 4. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 5. Standard contact material consists of copper alloy with gold plating over nickel. 6. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 7. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

91 IPT 00 A...N0 Wall Mounting Receptacle without ackshell IPT Series ayonet ock onnectors Shell size F Thread in inches TAE I: DIMENSIONS G ±0.4 H ±0.1 ØM UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

92 IPT Series ayonet ock onnectors IPT 00 A...PG Wall Mounting Receptacle with PG Threaded ackshell Polychloroprene Environmental lass A...PG - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) PG Thread Size See Table I IPT 00 A P Z PG16 XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone ØM H PG D G Application Notes 1. Wall mounting receptacle with PG threaded backshell. Other PG sizes and types available on request ; through mounting holes. 2. onnector lass A (non-environmental) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

93 IPT 00 A...PG Wall Mounting Receptacle with PG Threaded ackshell IPT Series ayonet ock onnectors Shell size D Max Max TAE I: DIMENSIONS PG Thread G ±0.4 H ± / / 13.5 / / 13.5 / / / / 16 / / 16 / ØM TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

94 IPT Series ayonet ock onnectors IPT 00 A...PH Wall Mounting Receptacle with ackshell and PG able Gland Polychloroprene Environmental lass A...PH - Non Environmental Shell Size and Arrangement ontact Type - rimp (Omit for Solder up) PG able Gland Size See Table I IPT 00 A P Z PH16 XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II Silicone A PG able Gland ØM H G Application Notes 1. Wall mounting receptacle with backshell and plastic PG cable gland. Other PG sizes and types available upon request; through mounting holes. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

95 IPT 00 A...PH Wall Mounting Receptacle with ackshell and PG able Gland IPT Series ayonet ock onnectors Shell size A Max min. - max. TAE I: DIMENSIONS PG able Gland Size G ±0.4 H ± / / / 6-12 / / 13.5 / / 6-12 / / 13.5 / / / / / / 9-14 / / 16 / / 9-14 / / 16 / ØM TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

96 IPT Series ayonet ock onnectors IPT 00 A...PHM Wall Mounting Receptacle with PHM ackshell and Sleeves to Accommodate Various able Sizes Polychloroprene Environmental lass A...PHM - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) PHM11 Thread Size See Table I IPT 00 A P Z PHM11 XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone ØM H D G Application Notes 1. Wall mounting receptacle with backshell and PHM cable clamp. Rubber sleeves included to allow use of different cable diameters. Through mounting holes. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

97 IPT 00 A...PHM Wall Mounting Receptacle with PHM ackshell and Sleeves to Accommodate Various able Sizes IPT Series ayonet ock onnectors Shell size P.N. PHM TAE I: DIMENSIONS min. - max. D G ±0.4 H ±0.1 ØM / / / 22 / / / TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

98 IPT Series ayonet ock onnectors IPT 00 A...SR Wall Mounting Receptacle with ackshell, ushing and able lamp Polychloroprene Environmental lass A...SR - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) able lamp with ushing IPT 00 A P Z SR XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone N ØM H D G F Application Notes 1. Wall mounting receptacle with backshell, bushing and cable clamp; through mounting holes. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

99 IPT 00 A...SR Wall Mounting Receptacle with ackshell, ushing and able lamp IPT Series ayonet ock onnectors Shell size ±0.25 F (*) ±0.75 TAE I: DIMENSIONS D ±0.2 G ±0.4 H ±0.1 ØM N Thread , , , , , , , (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

100 IPT Series ayonet ock onnectors IPT 00 E Wall Mounting Receptacle with General Duty ackshell Polychloroprene Environmental lass E - Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 00 E P Z XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone ØM H D G Application Notes 1. Wall mounting receptacle includes sealing grommet and backshell for use with individual wires. Through mounting holes. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

101 IPT 00 E Wall Mounting Receptacle with General Duty ackshell IPT Series ayonet ock onnectors Shell size D TAE I: DIMENSIONS G ±0.4 H ±0.1 ØM TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

102 IPT Series ayonet ock onnectors IPT 00 E...SR Wall Mounting Receptacle with ackshell, able lamp and ushing Polychloroprene Environmental lass E...SR - Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) able lamp with ushing IPT 00 E P Z SR XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone N ØM H D G F Application Notes 1. Wall mounting receptacle with cable clamp and bushing for cable protection; through mounting holes. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

103 IPT 00 E...SR Wall Mounting Receptacle with ackshell, able lamp and ushing IPT Series ayonet ock onnectors Shell size ±0.25 F (*) ±0.75 TAE I: DIMENSIONS D ±0.2 G ±0.4 H ±0.1 ØM N Thread , , , , , , , (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

104 IPT Series ayonet ock onnectors IPT 00 G Wall Mounting Receptacle with Shrink oot ackshell Polychloroprene Environmental lass G - Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 00 G P Z XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone A ØM H D 3.5 G Application Notes 1. Wall mounting receptacle with backshell for heat shrink boot; through mounting holes. 2. onnector lass G (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

105 IPT 00 G Wall Mounting Receptacle with Shrink oot ackshell IPT Series ayonet ock onnectors Shell size A ± TAE I: DIMENSIONS D G ±0.4 H ±0.1 ØM TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

106 IPT Series ayonet ock onnectors IPT 00 J Wall Mounting Receptacle with ong ackshell and able lamp Polychloroprene Environmental lass J- Environmental with ong ackshell and able lamp Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 00 J P Z XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone N ØM H Ø E G F Application Notes 1. Wall mounting receptacle with backshell incorporated metal sleeve and cable clamp; through mounting holes. 2. onnector/ackshell lass J (environmental) No grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

107 IPT 00 J Wall Mounting Receptacle with ong ackshell and able lamp IPT Series ayonet ock onnectors Shell size open Ø F (**) closed ±0.75 TAE I: DIMENSIONS E ±0.2 G ±0.4 H ±0.1 ØM N Thread 8 5,85 4, ,9 5, ,25 8,6 6, ,7 10,2 7, ,5 8, ,5 13,5 11, , , , , (*) 18.8 (*) 16, (*) onsult the factory. (**) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

108 IPT Series ayonet ock onnectors IPT 00 M Wall Mounting Receptacle with ackshell for EMI Shield Termination and Shrink oot Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 00 M P Z XX SIPT Silicone Environmental lass M - Environmental with ackshell for EMI Shield Termination and able Shrink oot ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) K ØM H D G Application Notes 1. Wall mounting receptacle with backshell for terminating shielded cable, suitable for heat shrink boots; through mounting holes. 2. onnector/ackshell lass M (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

109 IPT 00 M Wall Mounting Receptacle with ackshell for EMI Shield Termination and Shrink oot IPT Series ayonet ock onnectors Shell size D TAE I: DIMENSIONS min. G ±0.4 H ±0.1 ØM K Key TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

110 IPT Series ayonet ock onnectors IPT 00 W Wall Mounting Receptacle with ong ackshell, Metal Sleeve and Gland Seal Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 00 W P Z XX SIPT Silicone Environmental lass W - Environmental with ong ackshell Metal Sleeeve and Gland Seal ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) ØM H Ø D G Application Notes 1. Wall mounting receptacle with long backshell, incorporated metal sleeve and gland seal. No cable clamp provided; through mounting holes. 2. onnector/ackshell lass W (environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

111 IPT 00 W Wall Mounting Receptacle with ong ackshell, Metal Sleeve and Gland Seal IPT Series ayonet ock onnectors Shell size open Ø closed TAE I: DIMENSIONS D G ±0.4 H ±0.1 ØM ,85 4, ,9 5, ,25 8, ,7 10, , ,5 13, , , (*) 18.8 (*) (*) onsult the factory. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

112 IPT Series ayonet ock onnectors IPT 01 A In-ine able onnector with General Duty ackshell Polychloroprene onnector Shell Styles 00 - Wall Mounting Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 A P Z XX SIPT Environmental lass A - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone 9.5 E F D ØG Application Notes 1. In-line cable connector with general duty backshell. 2. onnector lass A (non-environmental no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

113 IPT 01 A In-ine able onnector with General Duty ackshell IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size D E min. F Thread in inches ØG ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

114 IPT Series ayonet ock onnectors IPT 01 A...N0 In-ine able onnector without ackshell Polychloroprene Environmental lass A...N0 - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) NO - No ackshell NOG - Supplied with Grommet and ompression Ring, No backshell IPT 01 A P Z N0 XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone ØG F Application Notes 1. In-line cable connector without backshell with rear thread for the attachment of additional accessories. 2. onnector lass A...N0 (non-environmental ) no grommet supplied. 3. onnector lass A..NOG (non-environmental ) supplied with grommet and compression ring, no backshell. 4. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 5. Standard contact material consists of copper alloy with gold plating over nickel. 6. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 7. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

115 IPT 01 A...N0 In-ine able onnector without ackshell IPT Series ayonet ock onnectors Shell size ØG ±0.2 TAE I: DIMENSIONS F Thread in inches UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

116 IPT Series ayonet ock onnectors IPT 01 A...PG In-ine able onnector with PG Threaded ackshell Polychloroprene Environmental lass A...PG - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) PG Thread Size See Table I IPT 01 A P Z PG16 XX SIPT onnector Shell Styles 01 - In-ine able onnector ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone PG ØG Application Notes 1. In-line cable connector with backshell adapter threaded for use with PG cable glands (not included). Other types of PG adapters can be supplied in various sizes upon request. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

117 IPT 01 A...PG In-ine able onnector with PG Threaded ackshell IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØG ±0.2 PG Thread TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

118 IPT Series ayonet ock onnectors IPT 01 A...PH In-ine able onnector with ackshell and Plastic PG able Gland Polychloroprene Environmental lass A...PH - Non Environmental Shell Size and Arrangement ontact Type - rimp (Omit for Solder up) PG able Gland Size See Table I IPT 01 A P Z PH16 XX SIPT onnector Shell Styles 01 - In-ine able onnector ontact Gender P - Pin S - Socket Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II Silicone PG able Gland A ØG Application Notes 1. In-line cable connector with backshell and plastic PG cable gland. Other types of PG adapters can be supplied in various sizes upon request. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

119 IPT 01 A...PH In-ine able onnector with ackshell and Plastic PG able Gland IPT Series ayonet ock onnectors Shell size A TAE I: DIMENSIONS min. - max. PG able Gland Size / / / 6-12 / / 13.5 / / 6-12 / / 13.5 / / / / / / 9-14 / / 16 / / 9-14 / / 16 / ØG ±0.2 TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

120 IPT Series ayonet ock onnectors IPT 01 A...PHM In-ine able onnector with PHM ackshell and Sleeves to Accommodate Various able Sizes Polychloroprene Environmental lass A...PHM - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) PHM11 Thread Size See Table I IPT 01 A P Z PHM11 XX SIPT onnector Shell Styles 01 - In-ine able onnector ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone Ø Ø ØG Application Notes 1. In-line cable connector with backshell and PHM cable clamp. Rubber sleeves included to allow use of different cable diameters. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

121 IPT 01 A...PHM In-ine able onnector with PHM ackshell and Sleeves to Accommodate Various able Sizes IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size P.N. PHM Ø min. - max. ØG ± / / / 22 / / / TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

122 IPT Series ayonet ock onnectors IPT 01 A...SR In-ine able onnector with ackshell, able lamp and ushing Polychloroprene Environmental lass A...SR - Non Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) able lamp with ushing IPT 01 A P Z SR XX SIPT onnector Shell Styles 01 - In-ine able onnector ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone N E ØG F Application Notes 1. In-line cable connector with backshell, cable clamp and bushing for cable protection. 2 onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

123 IPT 01 A...SR In-ine able onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ±0.25 F (*) ±0.75 E ±0.2 ØG ±0.2 N Thread , , , , , , , (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

124 IPT Series ayonet ock onnectors IPT 01 E In-ine able onnector with General Duty ackshell Polychloroprene Environmental lass E - Environmental With Real Wire Sealing Grommet Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 E P Z XX SIPT onnector Shell Styles 00 - Wall Mounting Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone ØD ØG Application Notes 1. In-ine able onnector lass E (environmental) Wire sealing grommet and general duty backshell supplied. 2. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 3. Standard contact material consists of copper alloy with gold plating over nickel. 4. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

125 IPT 01 E In-ine able onnector with General Duty ackshell IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØD ØG ± TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

126 IPT Series ayonet ock onnectors IPT 01 E...SR In-ine able onnector with ackshell, able lamp and ushing Polychloroprene Environmental lass E...SR - Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) able lamp with ushing IPT 01 E P Z SR XX SIPT onnector Shell Styles 01 - In-ine able onnector ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone N E ØG F Application Notes 1. In-line cable connector with sealing grommet, cable clamp and bushing for cable protection. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

127 IPT 01 E...SR In-ine able onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ±0.25 F (*) ±0.75 E ±0.2 ØG ±0.2 N Thread , , , , , , , (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

128 IPT Series ayonet ock onnectors IPT 01 G In-ine able onnector with Shrink oot ackshell Polychloroprene Environmental lass G - Environmental with Shrink oot ackshell Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 G P Z XX SIPT onnector Shell Styles 01 - In-ine able onnector ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone A Ø Ø ØD 3.5 ØG Application Notes 1. In-line cable connector with sealing grommet and backshell for heat shrink boot. 2. onnector/ackshell lass G (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

129 IPT 01 G In-ine able onnector with Shrink oot ackshell IPT Series ayonet ock onnectors Shell size A ±0.1 TAE I: DIMENSIONS Ø Ø ØD ØG ±0.2 TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

130 IPT Series ayonet ock onnectors IPT 01 J In-ine able onnector with ackshell, able lamp and Sleeve Polychloroprene Environmental lass J- Environmental with ong ackshell and able lamp Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 J P Z XX SIPT onnector Shell Styles 01 - In-ine able onnector ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone N Ø E ØG F Application Notes 1. In-line cable connector with backshell, incorporated metal sleeve and cable clamp. 2. onnector/ackshell lass J (environmental) No grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

131 IPT 01 J In-ine able onnector with ackshell, able lamp and Sleeve IPT Series ayonet ock onnectors Shell size open Ø F (**) closed ±0.75 TAE I: DIMENSIONS E ±0.2 ØG ±0.2 N Thread 8 5,85 4, ,9 5, ,25 8,6 6, ,7 10,2 7, ,5 8, ,5 13,5 11, , , , , (*) 18.8 (*) 16, (*) onsult the factory. (**) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

132 IPT Series ayonet ock onnectors IPT 01 M In-ine able onnector with ackshell for EMI Shield Termination and Shrink oot Polychloroprene onnector Shell Styles 01 - In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 M P Z XX SIPT Silicone Environmental lass M - Environmental with ackshell for EMI Shield Termination and able Shrink oot ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) 1 K 3.5 ±0.2 2 D3 D5 D4 D2 D ØG Application Notes 1. In-line cable connector with backshell for terminating EMI shielding and attaching heat shrink boots. 2. onnector/ackshell lass M (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

133 IPT 01 M In-ine able onnector with ackshell for EMI Shield Termination and Shrink oot IPT Series ayonet ock onnectors Shell size K Key ØG ±0.2 D TAE I: DIMENSIONS D3 min. D4 D5 D min M14x M16x M20x M23x M26x M30x M32x M36x M39x TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

134 IPT Series ayonet ock onnectors IPT 01 W In-ine able onnector with ong ackshell, Metal Sleeve and Gland Seal Polychloroprene onnector Shell Styles 01 - In-ine able onnector Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 01 W P Z XX SIPT Environmental lass W - Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone Ø D ØG Application Notes 1. In-line cable connector with long backshell, incorporated metal sleeve and gland seal. No cable clamp provided. 2. onnector/ackshell lass W (environmental) No grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

135 IPT 01 W In-ine able onnector with ong ackshell, Metal Sleeve and Gland Seal IPT Series ayonet ock onnectors Shell size open Ø TAE I: DIMENSIONS closed D ØG ± ,85 4, ,9 5, ,25 8, ,7 10, , ,5 13, , , (*) 18.8 (*) (*) onsult the factory. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

136 IPT Series ayonet ock onnectors IPT 02 PP Through ulkhead Receptacle Polychloroprene onnector Shell Styles 02 - Through ulkhead Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 02PP P/S Z XX SIPT Solid ontact Gender P/S - Pin and Socket Mod. ode Options See Table II Silicone A ØM H socket side pin side G Application Notes 1. Through bulkhead receptacle with solid feedthrough contacts. 2. Through mounting holes. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

137 IPT 02 PP Through ulkhead Receptacle IPT Series ayonet ock onnectors Shell size A TAE I: DIMENSIONS ± G ±0.4 H ± ØM TAE II: MODIFIATION ODES F6 F7 F11 M FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

138 IPT Series ayonet ock onnectors IPT 02 A and IPT 02 E ox Mounting Receptacle Polychloroprene onnector Shell Styles 02 - ox Mounting Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 02 A P Z XX SIPT Environmental lass A - Non - environmental E - Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone ØM H F D A E G Application Notes 1. ox mount receptacle with through mounting holes; no rear accessory threads. 2. onnector lass A (non-environmental). onnector lass E (environmental ). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

139 IPT 02 A and IPT 02 E ox Mounting Receptacle IPT Series ayonet ock onnectors Shell size A TAE I: DIMENSIONS D E F G ±0.4 H ± ØM TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

140 IPT Series ayonet ock onnectors IPT 02 Y ox Mounting Receptacle with Printed ircuit oard Terminations Polychloroprene onnector Shell Styles 02 - ox Mounting Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 02 Y P Z XX SIPT Environmental lass Y - P Tails No Accessory Threads See Table II for Dimensions ontact Gender P - Pin S - Socket Mod. ode Options See Table III Silicone ØM H F E A G D Application Notes 1. ox mounting receptacle with P tails and no accessory threads. Printed circuit board terminations. ontact factory for custom tail lengths. 2. Through mounting holes. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

141 IPT 02 Y ox Mounting Receptacle with Printed ircuit oard Terminations IPT Series ayonet ock onnectors Shell size Shell Size A ±0.1 TAE I: DIMENSIONS F G ±0.4 H ±0.1 ØM D ±0.4 TAE II: DIMENSIONS Y Y1 Y2 YS Y YM YK E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 D ± E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 TAE III: MODIFIATION ODES F6 F7 F11 M FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

142 IPT Series ayonet ock onnectors IPT 06 A Straight Plug onnector with ackshell to Accommodate MS3057 able lamp (Not Included) Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z XX SIPT Grounding Fingers (Omit for Standard) Environmental lass A - Non - environmental E - Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone 9.5 F D ØG Application Notes 1. Straight plug with backshell for attachment of cable clamp MS3057-A// (not included). 2. onnector lass A (non-environmental ) no grommet supplied. 3. onnector lass E (environmental)--wire sealing grommet supplied. 4. Standard materials configuration consists of aluminum alloy. 5. Standard contact material consists of copper alloy with gold plating over nickel. 6. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 7. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

143 IPT 06 A Straight Plug onnector with ackshell to Accommodate MS3057 able lamp (Not Included) IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size min. D F Thread in inches ØG ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

144 IPT Series ayonet ock onnectors IPT 06 A...N0 Straight Plug onnector with Accessory Threads Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z XX N0 SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass A...N0 - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) NO - No ackshell NOG - Supplied with Grommet and ompression Ring, No backshell E F H ØG A Application Notes 1. Straight plug without backshell. 2. onnector lass A (non-environmental ) no grommet supplied. 3. onnector lass A..NOG (non-environmental ) supplied with grommet and compression ring, no backshell. 4. Standard materials configuration consists of aluminum alloy. 5. Standard contact material consists of copper alloy with gold plating over nickel. 6. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

145 IPT 06 A...N0 Straight Plug onnector with Accessory Threads IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size A H ±0.2 E ±0.2 ØG ±0.2 F Thread in inches UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

146 IPT Series ayonet ock onnectors IPT 06 A... AT Straight Plug onnector with Accessory Threads and Arctic oupling Nut Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z AT XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass A...AT - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Arctic oupling Nut Supplied without ackshell E F H ØG A Application Notes 1. Straight plug with Arctic coupling nut (IAW S9522 F0017). 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

147 IPT 06 A...AT Straight Plug onnector with Accessory Threads and Arctic oupling Nut IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size A H ±0.2 E ±0.2 ØG ±0.2 F Thread in inches UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF For accessories and external dimensions see IPT06. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

148 IPT Series ayonet ock onnectors IPT 06 A...PG Straight Plug onnector with PG Threaded ackshell Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z PG16 XX SIPT Grounding Fingers (Omit for Standard) Environmental lass A...PG - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) PG Thread Size See Table I Silicone PG ØG Application Notes 1. Straight plug with backshell for use with PG glands (not included). Other PG sizes and types available upon request. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

149 IPT 06 A...PG Straight Plug onnector with PG Threaded ackshell IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size Max PG Thread ØG ± / / 13.5 / / 13.5 / / / / 16 / / 16 / TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

150 IPT Series ayonet ock onnectors IPT 06 A...PH Straight Plug onnector with ackshell and PG able Gland Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z PH16 XX SIPT Grounding Fingers (Omit for Standard) Environmental lass A...PH - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) PG able Gland Size See Table I Silicone PG able Gland A ØG Application Notes 1. Straight plug with backshell and plastic PG cable gland. Other types of PG adapters can be supplied in various sizes upon request. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

151 IPT 06 A...PH Straight Plug onnector with ackshell and PG able Gland IPT Series ayonet ock onnectors Shell size A Max TAE I: DIMENSIONS min. - max. PG able Gland Size ØG ± / / / 6-12 / / 13.5 / / 6-12 / / 13.5 / / / / / / 9-14 / / 16 / / 9-14 / / 16 / TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

152 IPT Series ayonet ock onnectors IPT 06 A...PHM Straight Plug onnector with PHM ackshell and Sleeves to Accommodate Various able Sizes Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z PHM18 XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass A...PHM - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) PG Thread Size See Table I Ø Ø ØG Application Notes 1. Straight plug with PHM backshell includes rubber sleeves to allow use of different diameter cables. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

153 IPT 06 A...PHM Straight Plug onnector with PHM ackshell and Sleeves to Accommodate Various able Sizes IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size P.N. PHM Ø min. - Ø ØG ± / / / 22 / / / TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

154 IPT Series ayonet ock onnectors IPT 06 A...PHM EMI67 Straight Plug onnector with ackshell for EMI Shield Termination Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z PHM18EMI67 XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass A...PHM - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) PG Thread Size See Table I ØG Exploded View Application Notes 1. Straight plug with PHM backshell includes rubber sleeves to allow use of different diameter cables. 2. onnector lass A (non-environmental ) no grommet supplied. PHM connector accessory provides environmental sealing to IP Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

155 IPT 06 A...PHM EMI67 Straight Plug onnector with ackshell for EMI Shield Termination IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size P.N. PHM min. - max. ØG ± / / / 22 / / / TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

156 IPT Series ayonet ock onnectors IPT 06 A...SR Straight Plug onnector with ackshell, able lamp and ushing Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 A P Z SR XX SIPT Grounding Fingers (Omit for Standard) Environmental lass A...SR - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) able lamp and ushing Silicone N E ØG F Application Notes 1. Straight plug with cable clamp and bushing. 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

157 IPT 06 A...SR Straight Plug onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ±0.25 F (*) ±0.75 E ±0.2 ØG ±0.2 N Thread , , , , , , , (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

158 IPT Series ayonet ock onnectors IPT 06 E Straight Plug onnector with General Duty ackshell Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 E P Z XX SIPT Grounding Fingers (Omit for Standard) Environmental lass E - Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone D ØG Application Notes 1. Straight plug with grommet and simple backshell for use with open wire bundles. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

159 IPT 06 E Straight Plug onnector with General Duty ackshell IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size D ØG ± TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

160 IPT Series ayonet ock onnectors IPT 06 E...PG Straight Plug onnector with PG Threaded ackshell Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 E P Z PG16 XX SIPT Grounding Fingers (Omit for Standard) Environmental lass E...PG - Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) PG Thread Size See Table I Silicone PG ØG Application Notes 1. Straight plug with backshell for use with PG glands (not included). Other PG sizes and types available upon request. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

161 IPT 06 E...PG Straight Plug onnector with PG Threaded ackshell IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size Max PG Thread ØG ± / / 13.5 / / 13.5 / / / / 16 / / 16 / TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

162 IPT Series ayonet ock onnectors IPT 06 E...SR Straight Plug onnector with ackshell, able lamp and ushing Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) able lamp and ushing IPT G 06 E P Z SR XX SIPT Grounding Fingers (Omit for Standard) Environmental lass E...SR - Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II Silicone N E ØG F Application Notes 1. Straight plug with cable clamp and bushing for cable protection. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

163 IPT 06 E...SR Straight Plug onnector with ackshell, able lamp and ushing IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ±0.25 F (*) ±0.75 min. E ±0.2 ØG ±0.2 N Thread , , , , , , , (*) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

164 IPT Series ayonet ock onnectors IPT 06 G Straight Plug onnector with ackshell for Heat Shrink oot Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 G P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass G - Environmental with ackshell for Heat Shrink oot ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) A Ø Ø ØD 3.5 ØG Application Notes 1. Straight plug with backshell suitable for heat shrink boot; Environmental, connector includes wire sealing grommet. 2. Standard materials configuration consists of aluminum alloy. 3. onnector/ackshell lass G (environmental)--wire sealing grommet supplied. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

165 IPT 06 G Straight Plug onnector with ackshell for Heat Shrink oot IPT Series ayonet ock onnectors Shell size A ±0,1 Ø TAE I: DIMENSIONS Ø ØD ØG ± TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

166 IPT Series ayonet ock onnectors IPT 06 J Straight Plug onnector with ong ackshell, Metal Sleeve, able Sealing Gland, and able lamp Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 J P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass J - Environmental, includes ong ackshell, Metal Sleeve and Overall able Sealing Gland N ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Ø E ØG F Application Notes 1. Straight plug with long backshell, incorporated metal sleeve, gland seal and cable clamp. 2. onnector/ackshell lass J (environmental) No grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

167 IPT 06 J Straight Plug onnector with ong ackshell, Metal Sleeve, able Sealing Gland, and able lamp IPT Series ayonet ock onnectors Shell size open Ø F (**) closed ±0.75 TAE I: DIMENSIONS E ±0.2 ØG ±0.2 N Thread 8 5,85 4, ,9 5, ,25 8,6 6, ,7 10,2 7, ,5 8, ,5 13,5 11, , , , , (*) 18.8 (*) 16, (*) onsult the factory. (**) able clamp cleats fully closed. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

168 IPT Series ayonet ock onnectors IPT 06 W Straight Plug onnector with ong ackshell and able Sealing Gland Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 W P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass W- Environmental; ackshell includes an Overall able Sealing Gland ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Ø D ØG Application Notes 1. Straight plug with long backshell, incorporated metal sleeve and gland seal. No cable clamp provided. 2. onnector/ackshell lass W (environmental) No grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

169 IPT 06 W Straight Plug onnector with ong ackshell and able Sealing Gland IPT Series ayonet ock onnectors Shell size (*) onsult the factory. open TAE I: DIMENSIONS Ø closed D ØG ± ,85 4, ,9 5, ,25 8, ,7 10, , ,5 13, , , (*) 18.8 (*) TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

170 IPT Series ayonet ock onnectors IPT 06 M Straight Plug onnector with ackshell Suitable for EMI Shield Termination and Heat Shrink oot Polychloroprene onnector Shell Styles 06 - Straight Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 06 M P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass M- Environmental Plug with ackshell for EMI Shield Termination and Heat Shrink oot ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) K A Grounding Finger ØG Application Notes 1. Straight plug with backshell for heat shrink boot, and/or terminating EMI shielded cable. 2. Standard materials configuration consists of aluminum alloy. 3. onnector/ackshell lass M (environmental)--wire sealing grommet supplied. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

171 IPT 06 M Straight Plug onnector with ackshell Suitable for EMI Shield Termination and Heat Shrink oot IPT Series ayonet ock onnectors Shell size A TAE I: DIMENSIONS min. K Key Max ØG ± TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

172 IPT Series ayonet ock onnectors IPT 07 A Rear ox Mount Jam Nut Receptacle onnector Polychloroprene onnector Shell Styles 07 - Rear Panel Mount Jam Nut Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 07 A P Z XX SIPT Environmental lass A - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone A D H 1 F S G E Application Notes 1. Real box mount jam nut receptacle; No accessory threads. 2. onnector lass A (non-environmental). 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

173 IPT 07 A Rear ox Mount Jam Nut Receptacle onnector IPT Series ayonet ock onnectors Shell size A ±0.4 ± TAE I: DIMENSIONS D E min. E F Thread in inches G H ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF S ±0.5 TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

174 IPT Series ayonet ock onnectors IPT 07 E Rear Panel Mount Jam Nut Receptacle onnector with ackshell Polychloroprene onnector Shell Styles 07 - Rear Panel Mount Jam Nut Receptacle Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT 07 E P Z XX SIPT Environmental lass E - Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Silicone D D1 H 1 G Application Notes 1. Rear panel mount jam nut receptacle connector with simple backshell for open wire bundles. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

175 IPT 07 E Rear Panel Mount Jam Nut Receptacle onnector with ackshell IPT Series ayonet ock onnectors Shell size TAE I: DIMENSIONS D G ±0.4 H ± D1 min. TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

176 IPT Series ayonet ock onnectors IPT 07 E...SR Rear Panel Mount Jam Nut Receptacle onnector and ackshell with able lamp and ushing Polychloroprene Environmental lass E...SR - Environmental Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) able lamp with ushing IPT 07 E P Z SR XX SIPT Silicone onnector Shell Styles 07 - Rear Panel Mount Jam Nut Receptacle ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) Mod. ode Options See Table II N D H 1 G Application Notes 1. Rear panel mount jam nut receptacle connector with backshell cable clamp and bushing for cable protection. 2. onnector lass E (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

177 IPT 07 E...SR Rear Panel Mount Jam Nut Receptacle onnector and ackshell with able lamp and ushing IPT Series ayonet ock onnectors Shell size ± TAE I: DIMENSIONS ±0.2 D G ±0.4 H ±0.4 Max N Thread TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

178 IPT Series ayonet ock onnectors IPT 07 Y Rear ox Mount Jam Nut Receptacle with Printed ircuit oard ontacts Polychloroprene Environmental lass Y - Print ircuit oard ontacts See Table II for Dimensions Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 07 Y P Z XX SIPT onnector Shell Styles 07 - Rear Panel Mount Jam Nut Receptacle ontact Gender P - Pin S - Socket Mod. ode Options See Table III Silicone D H 1 F E A S G D Application Notes 1. Rear box mount jam nut receptacle connector with printed circuit board contacts. 2. onnector Style Y Includes P tails. ontact factory for custom tail lengths. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

179 IPT 07 Y Rear ox Mount Jam Nut Receptacle with Printed ircuit oard ontacts IPT Series ayonet ock onnectors Shell size A ± D TAE I: DIMENSIONS E min. E F Thread in inches UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF Shell size TAE II: DIMENSIONS G ±0.4 H ±0.4 Y Y1 Y2 YS Y YM YK S ±0.4 D D D D D D D ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ±0.2 ±0.4 ± TAE III: MODIFIATION ODES F6 F7 F11 M FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

180 IPT Series ayonet ock onnectors IPT 071 YK Rear ox Mount Jam Nut Receptacle with Standoff and Printed ircuit oard ontacts Polychloroprene Environmental lass YK - Print ircuit oard ontacts Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) IPT 071 YK P Z XX SIPT onnector Shell Styles Rear ox Mount Jam Nut Receptacle ontact Gender P - Pin S - Socket Mod. ode Options See Table II Silicone A D D1 O-Ring 6 0-0,1 G F H Ø M3 Drain Holes 3.5 Min E 6 Min Application Notes 1. Rear box mount jam nut receptacle connector with standoff and printed circuit board contacts. 2. onnector Style YK Includes P tails. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

181 IPT 071 YK Rear ox Mount Jam Nut Receptacle with Standoff and Printed ircuit oard ontacts IPT Series ayonet ock onnectors Shell size A ± F Thread in inches TAE I: DIMENSIONS D ±0.2 E min. E G ± UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF D H ±0.4 TAE II: MODIFIATION ODES F6 F7 F11 M FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

182 IPT Series ayonet ock onnectors IPT 08 AM Plug onnector with 90 ackshell Suitable for MS3057 able lamp Polychloroprene onnector Shell Styles ackshell Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 08 AM P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass AM - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) ØG H F APPIATION NOTES Application Notes 1. Plug with 90 backshell for cable clamp MS3057-A// (not included). 2. onnector/ackshell lass AM (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

183 IPT 08 AM Plug onnector with 90 ackshell Suitable for MS3057 able lamp IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size F Thread in inches ØG ±0.2 H UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

184 IPT Series ayonet ock onnectors IPT 08 A...PHM Plug onnector with 90 PHM ackshell and Sleeves to Accommodate Various able Sizes Polychloroprene onnector Shell Styles ackshell Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 08 A P Z PHM18 XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass A...PHM - Non Environmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) ØG PHM able lampe Size See Table I H Application Notes 1. Plug with 90 backshell and PHM cable clamp. The PHM cable clamp assures excellent mechanical strength and splash proof sealing (if used with the correct neoprene sealing sleeves). 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

185 IPT 08 A...PHM Plug onnector with 90 PHM ackshell and Sleeves to Accommodate Various able Sizes IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size PHM able lamp Size min. - ØG ±0.2 H / / / 22 / / / TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

186 IPT Series ayonet ock onnectors IPT 08 EM Plug onnector with 90 ackshell with MS3057-A able lamp Polychloroprene onnector Shell Styles ackshell Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 08 EM P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass EM - Environmental Plug onnector with Wire Sealing Grommet and 90 ackshell ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) ØG H Application Notes 1. Plug with 90 backshell, sealing grommet and 90 ackshell suitable for MS3057-A cable clamp. 2. onnector/ackshell lass EM (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

187 IPT 08 EM Plug onnector with 90 ackshell with MS3057-A able lamp IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size ØG ±0.2 H TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

188 IPT Series ayonet ock onnectors IPT 08 M Plug onnector with 90 ackshell for Shield Termination and Shrink oot Polychloroprene onnector Shell Styles ackshell Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 08 M P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass M - Environmental Plug with Wire 90 ackshell ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) ØG Only Size H ØD Key 18 M Ø ØA Ø Ø ØA Application Notes 1. Plug with 90 backshell for terminating shielded cable. Also suitable for heat shrink boots. 2. onnector/ackshell lass M (environmental) Wire sealing grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

189 IPT 08 M Plug onnector with 90 ackshell for Shield Termination and Shrink oot IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell Size ØA ± 0.2 Ø ± 0.2 Ø +0.1/0 ØD 0/-0.2 M ± 0.5 ØG ±0.2 H TAE II: MODIFIATION ODES 0 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

190 IPT Series ayonet ock onnectors IPT 26 A Panel Plug onnector Polychloroprene onnector Shell Styles 26 - Panel Plug Shell Size and Arrangement Alternate Rotation W, X, Y, Z (Omit for Normal) Mod. ode Options See Table II IPT G 26 A P Z XX SIPT Silicone Grounding Fingers (Omit for Standard) Environmental lass A- Non nvironmental ontact Gender P - Pin S - Socket ontact Type - rimp (Omit for Solder up) M H G Application Notes 1. Square flange box mount plug connector to be mated with In-line receptacles (IPT01). 2. onnector lass A (non-environmental ) no grommet supplied. 3. Standard materials configuration consists of aluminum alloy. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber Glenair, Inc. U.S. AGE ode

191 IPT 26 A Panel Plug onnector IPT Series ayonet ock onnectors TAE I: DIMENSIONS Shell size G ±0.4 H ±0.1 M Thread UN UN UN UN TAE II: MODIFIATION ODES 0 F6 F7 F11 M ONTAT OPTIONS Description onnector Without ontacts (Only for crimp version) FINISH OPTIONS Description and RoHS compliant lack Electrodeposited Paint lack Zinc Nickel Electroless Nickel Marine ronze Omit for standard version (admium Olive Drab Finish) 2015 Glenair, Inc. U.S. AGE ode

192 IPT Series ayonet ock onnectors MI-DT-5015 TYPE FIED-READY RJ45 ETHERNET MI-DT-5015 TYPE REVERSE-AYONET SUPERSEA Rugged environmental MI-DT-5015 type Reverse ayonet onnectors with IP68 sealing, robust insert-to-shell grounding, and a complete range of wire, cable, and circuit board terminations Features Superior sealing IP68 when mated for complete system protection against water, sand and dust Shielded/grounded coupler designs in both receptacle and plug connectors rimp, solder-cup, P tail, and Quadrax contact/wire termination options RJ45 plug and/or jack interface options available in at 5e or at 6a Glenair Italia S.p.A. Via del lavoro, Quarto Inferiore Granarolo dell Emilia ologna - Italy Tel Glenair, Inc. U.S. AGE ode Fax GENAIR, IN AIR WAY GENDAE, A FAX info@glenair.it sales@glenair.com

193 IPT SE and IPT (MI-DT Serie I) onnector Accessories and Tools IPT ayonet ock onnector Accessories IPT SE and IPT Series onnector Accessories and Tools Section D IT 3057-A able lamp / IT able lamp D-2 ; D-3 IT 3420 and IT 3420-A Neoprene Sleeve D-4 IPT / IPT 3180-F and IPT 3180-S Protective Plug overs D-5; D-6 IPT and IPT 3181-F Protective Receptacle overs D-7 D IPT 3181-N and IPT 3181-NF Protective Receptacle overs D-8 IPT 3181-S Protective Receptacle overs D-9 IT R and IT Y Protective Receptacle and Plug Plastic aps D-10 IPT 3115 and IPT 3115A Dummy Stowage Receptacles D and S Square Flange Panel Mount Receptacle Sealing Gaskets D and Sealing Plug for Wire Sealing Grommet D-13 IPT Series Tools / IPT SE Series Tools D-14 ; D Glenair, Inc. U.S. AGE ode D-1

194 IPT ayonet ock onnector Accessories IT 3057-A able lamp Mod. ode Options See Table II IT A F11 MI-DT Serie I Accessory Finish Options See Table II Ø F ØA D TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) Application Notes General duty cable clamp suitable for jacketed cable or wires protected by tubing. TAE I: DIMENSIONS GENAIR P/N Shell size Sleeve to use ØA Ø F Thread in inches IT3057-3A 8 IT UNEF 20.6 IT3057-4A 10 IT UNEF 21.0 IT3057-6A 12 IT UNEF 22.2 IT3057-8A 14 IT UNEF 24.0 IT A 16 IT UNEF 28.5 IT A 18 IT NEF 24.0 IT A 20 IT NEF 24.0 IT A 22 IT NEF 26.0 IT A 24 IT NEF Glenair, Inc. U.S. AGE ode D-2

195 IT able lamp IPT ayonet ock onnector Accessories Mod. ode Options See Table II IT F11 MI-DT Serie I Accessory Finish Options See Table II V Ø F TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) ØA Application Notes Waterproof cable clamp suitable for jacketed cable or wires protected by tubing. Assures watertight integrity of connector. D TAE I: DIMENSIONS GENAIR P/N Shell size Sleeve to use ØA Ø F V min. Thread in inches Thread IT IT3420-3A UNEF N IT IT3420-4A UNEF N IT IT3420-4A / 6A UNEF N IT IT3420-6A / 8A UNEF N IT IT3420-6A / 10A UNEF N IT IT3420-8A / 12A NEF N IT IT3420-8A / 12A NEF N IT IT3420-8A / 12A / 16A NEF N IT IT3420-8A / 12A / 16A NEF N 2015 Glenair, Inc. U.S. AGE ode D-3

196 IPT ayonet ock onnector Accessories IT 3420 and IT 3420-A Neoprene Sleeve MI-DT Serie I Accessory asic Part Number and Shell Size IT TAE I: ASS A AE AMPS GENAIR ODE ØA GENAIR P/N ±0.1 ±0.1 ±0.1 ±0.1 IT IT IT IT IT IT IT : Application Notes ØA IT3420 : Neoprene sleeve for protection and reduction, used with class A cable clamps. D MI-DT Serie I Accessory asic Part Number and Shell Size IT A TAE II: ASS AE AMPS GENAIR ODE ØA GENAIR P/N ±0.1 ±0.1 ±0.1 IT3420-3A IT3420-4A IT3420-6A IT3420-8A IT A IT A IT A Application Notes ØA IT3420-A : Neoprene sleeve for protection and reduction, used with class cable clamps Glenair, Inc. U.S. AGE ode D-4

197 IPT and IPT 3180-F Protective Plug overs IPT ayonet ock onnector Accessories MI-DT Serie I Accessory asic Part Number and Shell Size anyard Style - hain F - Nylon ord Z2 - Nylon ord Finish Options See Table II IPT F11 A A A Ø3.6 ØF ØF Ø4.3 D Example: IPT (Stainless Steel hain) Example: IPT F (Nylon ord) Example: IPT Z2 (Nylon ord with loose terminal link and sleeve) GENAIR P/N Shell size A ØF min. IPT IPT IPT IPT IPT IPT IPT IPT IPT Application Notes Metal protective cover for plug connectors with stainless steel chain or nylon cord. TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) 2015 Glenair, Inc. U.S. AGE ode D-5

198 IPT ayonet ock onnector Accessories IPT 3180-S Protective Plug over Without hain MI-DT Serie I Accessory asic Part Number and Shell Size anyard Style S - Without hain Finish Options See Table II IPT S F11 Gasket ØD ØG D GENAIR P/N TAE I: DIMENSIONS Shell size ØD ØG IPT3181-8S IPT S IPT S IPT S IPT S IPT S IPT S IPT S IPT S Application Notes Metal protective cover for plug connectors without chain. Includes gasket. TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) 2015 Glenair, Inc. U.S. AGE ode D-6

199 IPT and IPT 3181-F Protective Receptacle overs IPT ayonet ock onnector Accessories MI-DT Serie I Accessory asic Part Number and Shell Size anyard Style - hain F - Nylon ord Z1 - Nylon ord Finish Options See Table II IPT F11 A A A Ø3.6 ØF ØF Ø4.3 D Example: IPT (Stainless Steel hain) Example: IPT F (Nylon ord) Example: IPT Z1 (Nylon ord with loose terminal link and sleeve) GENAIR P/N TAE I: DIMENSIONS Shell size A ØF min. IPT IPT IPT IPT IPT IPT IPT IPT IPT Application Notes Metal protective cover for receptacle connectors with stainless steel chain or nylon cord. TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) 2015 Glenair, Inc. U.S. AGE ode D-7

200 IPT ayonet ock onnector Accessories IPT 3181-N and IPT 3181-NF Protective Jam Nut Receptacle overs MI-DT Serie I Accessory anyard Style N - hain NF - Nylon ord IPT N F11 asic Part Number and Shell Size Finish Options See Table II A A D ØF ØF GENAIR P/N Shell size Example: IPT N (Stainless Steel hain) TAE I: DIMENSIONS A ØF min. IPT3181-8N IPT N IPT N IPT N IPT N IPT N IPT N IPT N IPT N Example: IPT NF (Nylon ord) Application Notes Metal protective cover for jam nut receptacle connectors with stainless steel chain or nylon cord. TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) 2015 Glenair, Inc. U.S. AGE ode D-8

201 IPT 3181-S Protective Receptacle over Without hain IPT ayonet ock onnector Accessories MI-DT Serie I Accessory asic Part Number and Shell Size anyard Style S - Without hain Finish Options See Table II IPT S F11 ØD Gasket ØG D GENAIR P/N TAE I: DIMENSIONS Shell size ØD ØG IPT3181-8S IPT S IPT S IPT S IPT S IPT S IPT S IPT S IPT S Application Notes Metal protective cover for receptacle connectors without chain. Includes gasket. TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) 2015 Glenair, Inc. U.S. AGE ode D-9

202 IPT ayonet ock onnector Accessories IT R and IT Y Protective Receptacle and Plug Plastic aps MI-DT Serie I Accessory asic Part Number and Shell Size IT R D Ø ØA GENAIR P/N GENAIR P/N Shell size Shell size Ø TAE I: REEPTAE AP DIMENSIONS ØA ±0.25 ØA ±0.25 Application Notes Ø ±0.25 IT R Receptacle TAE II: PUG AP DIMENSIONS Ø ±0.25 Ø ±0.78 IT R Receptacle IT R Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle IT Y Receptacle Ø ±0.78 IT Y Plug IT R Plug IT Y Plug IT R Plug IT Y Plug IT R Plug IT R Plug IT R Plug IT R Plug Plastic caps for protection against dust and damage Glenair, Inc. U.S. AGE ode D-10

203 IPT 3115 and IPT 3115A Dummy Stowage Receptacles IPT ayonet ock onnector Accessories MI-DT Serie I Accessory asic Part Number and Shell Size Finish Options See Table II ØM H IPT F11 A Application Notes IPT3115 : Dummy receptacle with rear base and seal. In conformity with MI-DT Serie I. G MI-DT Serie I Accessory asic Part Number and Shell Size Finish Options See Table II ØM H IPT A F11 A Application Notes IPT3115A : Dummy receptacle without rear base and seal. D G Shell size A TAE I G ±0.4 H ± ØM TAE II: MODIFIATION ODES Shell Finish (Omit for Standard ad/olive Drab Finish) F6 - lack Electrodeposited Paint (RoHs) F7 - lack Zinc Nickel (RoHs) F11 - Electroless Nickel (RoHs) M - Marine ronze (RoHs) 2015 Glenair, Inc. U.S. AGE ode D-11

204 IPT ayonet ock onnector Accessories and S Square Flange Panel Mount Receptacle Sealing Gaskets asic Part Number and Shell Size (See Table I and II) Material See Table III XX S 0.5 ±0.2 TAE I (NON ONDUTIVE) Ø ØD A Example: XX GENAIR P/N Shell size A Max ±0.3 Ø min. ØD +0.1 / D 0.5 ±0.2 Ø ØD A Example: XXS GENAIR P/N TAE II (ONDUTIVE) Shell size A Max ±0.3 Ø min. ØD +0.1 / S S S S S S S S S TAE III MATERIA S F V Y Description Omit for Neoprene Wire Mesh in Neoprene Substrate (onductive) Fluorosilicone Viton Silicone 2015 Glenair, Inc. U.S. AGE ode D-12

205 Sealing Plug for Wire Sealing Grommet IPT ayonet ock onnector Accessories asic Part Number A A Ø D GENAIR P/N ontact size TAE I A ±0.13 ±0.25 Ø ±0.13 olor Red lue Yellow 2015 Glenair, Inc. U.S. AGE ode D-13

206 D IPT ayonet ock onnector Accessories 2015 Glenair, Inc. U.S. AGE ode D-14 IPT Series Tools * Use together as alternative. IPT RIMP TOOS - PIN ONTATS Type of contact onnector Size A Ø Ø ØD onductor Size mm 2 AWG MANUA TOO *PNEUMATI TOO TYPE A TURRET INSERTION TOO EXTRATION TOO S ,4 1 1,3 1,93 0,2 0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO ,3 1 1,3 1,93 0,2 0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO S ,3 1,57 1,72 2,6 0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO ,3 1,57 1,72 2,6 0,2 0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO S 12S ,5 2,38 2,5 3,8 2, M M AF8 DM M WA27F DM M M22520/1.05 M GENAIR IT TOO M GENAIR IT TOO ,3 2,38 2,5 3,8 2, M M AF8 DM M WA27F DM M M22520/1.05 M GENAIR IT TOO M GENAIR IT TOO U.S. AGE ode E Glenair, Inc. Printed in U.S.A. E U.S. AGE ode Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. TAE I: PIN RIMP ONTAT PA U.S. AGE ode Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. TAE I: PIN RIMP ONTAT PA ontacts - Page 9 Turret for Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type A Turret for Pneumatic rimp Tool Type A S S 0,75-1, S S 3 12 M , M M ,15 0, M M M ,6 20 M M M M ,15 0, M M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M / M M M M ,2 6 M M M M Please consult our sales department for other contact options or crimp tooling details S S , M ,15-0, M M ,6 20 M M ,15-0, M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M U.S. AGE ode E-12 ENDAE, A FAX Printed in U.S.A. U.S. AGE ode Printed in U.S.A. se consult our sales department for other contact options or crimp tooling details. NUMERS, SIZE & DIMENSIONS U.S. AGE ode Printed in U.S.A. se consult our sales department for other contacts or crimp tooling details. NUMERS, SIZE & DIMENSIONS TOO ommital P/N M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M ,6 20 M M M ,15 0, M M M , M M M M M M M M M / M M M ,5-3,0 12 M M M ,5-3,0 12 M M M ,6 20 M M M , M M M M M M ,5 / M M M / M M M M 12 4 / M M M M M M / / / / ,2 6 / / / GUIDE PIN ontacts - Page 7 Guide Pin Tool Removal Tool Please consult our sales department for other contact options or crimp tooling details. NSIONS TOO ommital P/N M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M ,6 20 M M M ,15-0, M M M , M M M M M M M M M / M M M ,5-3,0 12 M M M ,5-3,0 12 M M M ,6 20 M M M , M M M M M M ,5 / M M M / M M M M 12 4 / M M M M M M / M M M ,2 6 M M M GUIDE PIN U.S. AGE ode ontacts and Tools E-M E-12 GENAIR, IN AIR WAY GENDAE, A Glenair, Inc. E ITS ayonet onnector Ass Socket rimp ontac ion and Removal too U.S. AGE ode Accessories Reverse ayonet Assemblies 2006 Glenair, Inc. ITS ayonet onnector A Socket rimp onta *Please consult our sales department for other contact options or crimp TAE I: SOKET RIMP ONTAT PART NUMERS, SIZE & D U.S. AGE ode Accessories Reverse ayonet Assemblies E 2006 Glenair, Inc. Please consult our sales department for other contacts or crimp toolin ITS ayonet onnector Ass Pin rimp ontacts TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENS ion and Removal T INSERTION TOO REMOVA TO mm 2 AWG ommital P/N ommital P/N ,15 0, M M ,15 0, M M S 1 1, M M TU 16S 1 1, M M S 0,6 20 M M S 0,15 0, M M S 0, M M S M M S 3 12 M M , M M TU , M M ,15 0, M M ,6 20 M M ,15 0, M M , M M M M M M / M M ,5-3,0 12 M M TU 12 2,5-3,0 12 M M ,6 20 M M , M M M M ,5 / M M / M M M 12 4 / M M M M / / / ,2 6 / / PART NUMER ONTAT SIZE WIRE SIZE ontacts - Page 7 Guide ion Tool Removal Tool Please consult our sales department for other contact options or crimp tool TAE I: INSERTION AND REMOVA TOOS PART NUMERS, SIZE & INSERTION TOO REMOVA mm 2 AWG ommital P/N ommital ,15-0, M M ,15-0, M M S 1-1, M M TU 16S 1-1, M M S 0,6 20 M M S 0,15-0, M M S 0, M M S M M S 3 12 M M , M M TU , M M ,15-0, M M ,6 20 M M ,15-0, M M , M M M M M M / M M ,5-3,0 12 M M TU 12 2,5-3,0 12 M M ,6 20 M M , M M M M ,5 / M M / M M M 12 4 / M M M M / M M ,2 6 M M PART NUMER ONTAT SIZE WIRE SIZE U.S. AGE ode E Glenair, Inc. Printed in U.S.A. E U.S. AGE ode Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS U.S. AGE ode Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS ontacts - Page 9 Turret for Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type A Turret for Pneumatic rimp Tool Type A ,15 0, M M M S 1 1, M M M M S M M M M S 0,15 0, M M M M S 0,75-1,0 18 M M M M S M M M M S 3 12 M M M M , M M M M ,15 0, M M M M ,6 20 M M M M ,15 0, M M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M / M M M M ,2 6 M M M M Please consult our sales department for other contact options or crimp tooling details S S 0,15-0, M M M M S 0,75-1,0 18 M M M M S M M M M S 3 12 M M M M , M M M M ,15-0, M M M M ,6 20 M M M M ,15-0, M M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M OA IPT RIMP TOOS - SOKET ONTATS Type of contact onnector Size A Ø Ø ØD onductor Size mm 2 AWG MANUA TOO *PNEUMATI TOO TYPE A TURRET INSERTION TOO EXTRATION TOO GUIDE PIN S ,4 1,08 1,3 1,93 0,2-0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO M GENAIR IT TOO ,3 1,08 1,3 1,93 0,2-0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO M GENAIR IT TOO S ,3 1,07 1,72 2,6 0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO M GENAIR IT TOO ,3 1,07 1,72 2,6 0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M GENAIR IT TOO M GENAIR IT TOO M GENAIR IT TOO S 12S ,45 2,48 2,5 3,8 2, M M AF8 DM M WA27F DM M M22520/1.05 M GENAIR IT TOO M GENAIR IT TOO M GENAIR IT TOO ,4 2,48 2,5 3,8 2, M M AF8 DM M WA27F DM M M22520/1.05 M GENAIR IT TOO M GENAIR IT TOO M GENAIR IT TOO FAX Printed in U.S.A. Printed in U.S.A. tact options or crimp tooling details. ONTAT PART NUMERS, SIZE & DIMENSIONS Printed in U.S.A. tacts or crimp tooling details. T PART NUMERS, SIZE & DIMENSIONS l Tools INSERTION TOO REMOVA TOO AWG ommital P/N ommital P/N M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M / / / / / / IZE GUIDE PIN Guide Pin act options or crimp tooling details. VA TOOS PART NUMERS, SIZE & DIMENSIONS INSERTION TOO REMOVA TOO AWG ommital P/N ommital P/N M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M SIZE GUIDE PIN U.S. AGE ode ontacts and Tools E Glenair, Inc. Printed in U.S.A. E ITS ayonet onnector Assemblies Pin rimp ontacts Manual and Pneumatic Tools U.S. AGE ode Accessories Reverse ayonet Assemblies 2006 Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. ITS ayonet onnector Assemblies Pin rimp ontacts TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS U.S. AGE ode Accessories Reverse ayonet Assemblies 2006 Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. ITS ayonet onnector Assemblies Pin rimp ontacts TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS Manual and Pneumatic Tools ontacts - Page 9 Turret for Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type A Turret for Pneumatic rimp Tool Type A mm 2 AWG MANUA TOO TURRET PNEUMATI TOO TURRET ,15-0, M M M M ,15 0, M M M M S 1 1, M M M M S M M M M S 0,15 0, M M M M S 0,75-1,0 18 M M M M S M M M M S 3 12 M M M M , M M M M ,15 0, M M M M ,6 20 M M M M ,15 0, M M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M / M M M M ,2 6 M M M M PNEUMATI TOO TYPE "A" PART NUMER WIRE SIZE ONTAT SIZE MANUA RIMP TOO Please consult our sales department for other contact options or crimp tooling details. TAE I: MANUA AND PNEUMATI TOOS PART NUMERS, SIZE & DIMENSIONS mm 2 AWG MANUA TOO TURRET PNEUMATI TOO TURRET ,15-0, M M M M ,15-0, M M M M S 1-1, M M M M S M M M M S 0,15-0, M M M M S 0,75-1,0 18 M M M M S M M M M S 3 12 M M M M , M M M M ,15-0, M M M M ,6 20 M M M M ,15-0, M M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M PNEUMATI TOO TYPE "A" PART NUMER WIRE SIZE ONTAT SIZE MANUA RIMP TOO U.S. AGE ode ontacts and Tools E AIR WAY GENDAE, A FAX Printed in U.S.A. E ITS ayonet onnector Assemblies Socket rimp ontacts ion and Removal tools U.S. AGE ode Accessories Reverse ayonet Assemblies Inc. Printed in U.S.A. ITS ayonet onnector Assemblies Socket rimp ontacts *Please consult our sales department for other contact options or crimp tooling details. TAE I: SOKET RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS U.S. AGE ode Accessories Reverse ayonet Assemblies c. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. ITS ayonet onnector Assemblies Pin rimp ontacts TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS ion and Removal Tools INSERTION TOO REMOVA TOO mm 2 AWG ommital P/N ommital P/N ,15 0, M M M ,15 0, M M M S 1 1, M M M TU 16S 1 1, M M M S 0,6 20 M M M S 0,15 0, M M M S 0, M M M S M M M S 3 12 M M M , M M M TU , M M M ,15 0, M M M ,6 20 M M M ,15 0, M M M , M M M M M M M M M / M M M ,5-3,0 12 M M M TU 12 2,5-3,0 12 M M M ,6 20 M M M , M M M M M M ,5 / M M M / M M M M 12 4 / M M M M M M / / / / ,2 6 / / / PART NUMER ONTAT SIZE WIRE SIZE GUIDE PIN ontacts - Page 7 Guide Pin ion Tool Removal Tool Please consult our sales department for other contact options or crimp tooling details. TAE I: INSERTION AND REMOVA TOOS PART NUMERS, SIZE & DIMENSIONS INSERTION TOO REMOVA TOO mm 2 AWG ommital P/N ommital P/N ,15-0, M M M ,15-0, M M M S 1-1, M M M TU 16S 1-1, M M M S 0,6 20 M M M S 0,15-0, M M M S 0, M M M S M M M S 3 12 M M M , M M M TU , M M M ,15-0, M M M ,6 20 M M M ,15-0, M M M , M M M M M M M M M / M M M ,5-3,0 12 M M M TU 12 2,5-3,0 12 M M M ,6 20 M M M , M M M M M M ,5 / M M M / M M M M 12 4 / M M M M M M / M M M ,2 6 M M M PART NUMER ONTAT SIZE WIRE SIZE GUIDE PIN U.S. AGE ode ontacts and Tools E Glenair, Inc. Printed in U.S.A. E U.S. AGE ode Accessories Reverse ayonet Assemblies 2006 Glenair, Inc. Printed in U.S.A. *Please consult our sales department for other contact options or crimp tooling details. TAE I: SOKET RIMP ONTAT PAR U.S. AGE ode Accessories Reverse ayonet Assemblies 2006 Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. TAE I: PIN RIMP ONTAT PART NUME mm 2 AWG ,15 0, ,15 0, S 1 1, TU 16S 1 1, S 0,6 20 M S 0,15 0, M S 0, M S M S 3 12 M , M TU , M ,15 0, M ,6 20 M ,15 0, M , M M M M M M / M M ,5-3,0 12 M M TU 12 2,5-3,0 12 M M ,6 20 M M , M M M M ,5 / M M / M M M M 12 4 / M M M M M M / / / / ,2 6 / / / PART NUMER ONTAT SIZE WIRE SIZE ontacts - Page 7 Guide Pin ion Tool Removal Tool Please consult our sales department for other contact options or crimp tooling details. TAE I: INSERTION AND REMOVA mm 2 AWG ,15-0, ,15-0, S 1-1, TU 16S 1-1, S 0, S 0,15-0, M S 0, M S M S 3 12 M , M TU , M ,15-0, M ,6 20 M ,15-0, M , M M M M M / M M ,5-3,0 12 M M TU 12 2,5-3,0 12 M M ,6 20 M M , M M M M ,5 / M M / M M M 12 4 / M M M M M M / M M M ,2 6 M M M PART NUMER ONTAT SIZE WIRE SIZE U.S. AGE ode ontacts and Tools E Glenair, Inc. Printed in U.S.A. E ITS ayonet onnector Assemblies Pin rimp ontacts Manual and Pneumatic Tools U.S. AGE ode Accessories Reverse ayonet Assemblies 2006 Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. ITS ayonet onnector Assemblies Pin rimp ontacts TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS U.S. AGE ode Accessories Reverse ayonet Assemblies 2006 Glenair, Inc. Printed in U.S.A. Please consult our sales department for other contacts or crimp tooling details. ITS ayonet onnector Assemblies Pin rimp ontacts TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS Manual and Pneumatic Tools ontacts - Page 9 Turret for Manual rimp Tool Manual rimp Tool Pneumatic rimp Tool Type A Turret for Pneumatic rimp Tool Type A mm 2 AWG MANUA TOO TURRET PNEUMATI TOO TURRET ,15-0, M M M M ,15 0, M M M M S 1 1, M M M M S M M M M S 0,15 0, M M M M S 0,75-1,0 18 M M M M S M M M M S 3 12 M M M M , M M M M ,15 0, M M M M ,6 20 M M M M ,15 0, M M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M / M M M M ,2 6 M M M M PNEUMATI TOO TYPE "A" PART NUMER WIRE SIZE ONTAT SIZE MANUA RIMP TOO Please consult our sales department for other contact options or crimp tooling details. TAE I: MANUA AND PNEUMATI TOOS PART NUMERS, SIZE & DIMENSIONS mm 2 AWG MANUA TOO TURRET PNEUMATI TOO TURRET ,15-0, M M M M ,15-0, M M M M S 1-1, M M M M S M M M M S 0,15-0, M M M M S 0,75-1,0 18 M M M M S M M M M S 3 12 M M M M , M M M M ,15-0, M M M M ,6 20 M M M M ,15-0, M M M M ,75-1,0 18 M M M M M M M M M M M M / M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,75-1,0 18 M M M M M M M M ,5 / M M M M / M M M M M 12 4 / M M M M M M M M PNEUMATI TOO TYPE "A" PART NUMER WIRE SIZE ONTAT SIZE MANUA RIMP TOO

207 Type of contact E onductor Size P 20 0,2-0,5 E IPT SE Series Tools IPT-SE RIMP TOOS - PIN AND SOKET ONTATS mm 2 AWG MANUA T OO S 20 0,2-0,5 22 M *PNEUMATI TOO TYPE A M M M22520/1.02 M M WA27F DM DM TH1A 24 AF8 DM (or M ) (or VH441 DM) S ,15 0, M M M S 0,15-0, M M M M S 1 1, M M M M S 0, S 3 TAE I: PIN RIMP ONTAT S 0,75-1,0 18 M M M M S M M M M S , S M M M M S 0,15 0, M M M M S 3 12 M ,15-0, M S 3 12 M M M M S 0,75-1,0 18 M M M M , M M ,6 20 M M ,15 0, M M M ,6 20 M M M M ,15-0, M M M ,15 0, M M M M ,75-1,0 18 M M M M ,75-1,0 18 M M M M M M M M M M M M M M M M M M M M / M M M M / M M M M ,5-3,5 12 M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,6 20 M M M M ,75-1,0 18 M M M M ,75-1,0 18 M M M M M M M M M M M M ,5 / M M M M ,5 / M M M M / M M M M / M M M M M 12 4 / M M M M M 12 4 / M M M M M M M M / M M M M M M M M ,2 6 M M M M Please consult our sales department for other contact options or crimp tooling details. Turret for Please consult our sales department for other contacts or crimp tooling Pneumatic details. rimp Tool Type A Manual rimp Tool Turret for Pneumatic rimp Tool Manual rimp Tool Type A 2006 Glenair, Inc. U.S. AGE ode Printed in U.S.A Glenair, Inc. U.S. AGE ode Printed in U.S.A. M AF8 DM TAE I: PIN RIMP ONTAT PART NUMERS, SIZE & DIMENSIONS S M M M M , M M M M S 3 12 M M M M ,15-0, M M M M , M M M M ,6 20 M M M M ,15 0, M M M M ,15-0, M M M M ,6 20 M M M M ,75-1,0 18 M M M M ,15 0, M M M M M M M M ,75-1,0 18 M M M M M M M M M M M M M M M M / M M M M / M M M M ,5-3,5 12 M M M M ,5-3,5 12 M M M M ,6 20 M M M M ,6 20 M M M M ,75-1,0 18 M M M M ,75-1,0 18 M M M M M M M M M M M M ,5 / M M M M ,5 / M M M M / M M M M / M M M M M 12 4 / M M M M M 12 4 / M M M M M M M M M M M M / M M M M Please consult our sales department for other contact options or crimp tooling details ,2 6 M M M M Turret for Please consult our sales department for other contacts or crimp tooling Pneumatic details. rimp Tool Type A Manual rimp Tool Turret for Pneumatic rimp Tool Manual rimp Tool Type A 2006 Glenair, Inc. U.S. AGE ode Printed in U.S.A. E-14 ontacts - Page 9 ontacts - Page Glenair, Inc. U.S. AGE ode Printed in U.S.A. E-14 M M WA27F DM (or M ) TURRET INSERTION TOO EXTRATION TOO M22520/1.02 DM TH1A (or VH441 DM) M DAK20 DM M DRK20 DM M DAK20 DM M DRK20 DM IPT ayonet ock onnector Accessories S 16 0, M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M DAK16 DM M DRK16 DM P 16 0, * Use together as alternative. M M AF8 DM M WA27F DM M (or M ) M22520/1.02 DM TH1A (or VH441 DM) M DAK16 DM M DRK16 DM D 2015 Glenair, Inc. U.S. AGE ode D-15

208 IPT ayonet ock onnector Accessories D The Faster 4/8 Pole Interconnect System for Ethernet Data Applications ITH connector with Octobyte contacts is available with fully dedicated ETHERNET protocol or in a combo version where a mix of signal-power and Ethernet is required. RoHS compliant, IP67 (IP68 on request) exceeds performance expections typical in harsh environmental applications found throughout Rail and Industrial markets. OTOYTE contacts are vibration resistant and available to work with ETHERNET cables from AT 5 to AT 7A, MV-WT, RG58 oax. ommuter Applications Adam E. Moreira Masakazu Matsumoto ITH connectors with OTOYTE contacts are easy and fast to assemble, making them best solution for harsh environment applications where signal reliability is a must: ommuter Rail Passenger Information Systems (Audio/Video/Digital displays) Monitoring and ontrol (raking/doors/ighting/data) Heavy Industry Data ontrol Safety Systems Tested according to: ISO F0 STP: AT 7A EN F600-STP: AT 7 EN D STP: AT 5E Tested for compliance according to EN standards set for AT5E and AT7. Testing was conducted using 12 jumpers, each 7.5 mt. in length for a total of 90 mt. Glenair Italia S.p.A. Via del avoro, Quarto Inferiore Granarolo dell Emilia - Italy Tel Glenair, Inc. U.S. AGE ode Fax GENAIR, IN AIR WAY GENDAE, A info@glenair.it FAX Passenger Information Systems D-16

209 Glenair IPT SE and IPT Series Product Index IPT ayonet ock onnectors Product index Section E IPT SE and IPT Series Additional Interconnect Solutions from the Glenair Power Products Group E-2 ; E-3 INDEX E-5 E 2015 Glenair, Inc. U.S. AGE ode E-1

210 IPT ayonet ock onnectors Additional Interconnect Solutions from the Glenair Power Products Group E Industry standard reverse-bayonet power and signal connectors (Glenair Series ITS) Industrial power and signal connectors for rugged applications from mining equipment to monorails Series ITS Plug Exploded View ackshell oupling Ring Wave Spring and Washer arrel Dozens of proven connector technologies for harsh application environments Hundreds of power and signal contact arrangements (crimp and solder) Threaded, reverse bayonet, and innovative latchand-lock coupling technologies Flame-resistant, caustic substance-free material choices for RoHS and other compliance standards Wide range of available catalog solutions Series ITS - Reverse-ayonet Power and Signal Series IT - Threaded oupling Power and Signal Series ITH - High Performance Rigid Power Series IPT - Standard ayonet Power and Signal Series IPT-SE - Standard ayonet rimp ontact VG VG VG Series ITZ - Triple-Start Thread Power and Signal Series IRT - High urrent High Voltage Rectangular Series 901- High urrent Medium Voltage ircular Series Reverse-ayonet Single-Pole High Voltage Series UJ - High Voltage Power Joint onnection System O-Ring Insulator ontact Glenair high-power tractor connector with TurboFlex 2015 Glenair, Inc. U.S. AGE ode E-2

211 Additional Interconnect Solutions from the Glenair Power Products Group IPT ayonet ock onnectors Glenair Industrial/Rail Power and Signal ircular onnectors ITS-RG Rubber-oated ITH Rigid IPT and IPT SE Standard ayonet Series ITS Reverse-ayonet VG96929 Single-Pole High urrent ayonet-ock onnectors Series X oaxial onnector Series IT Threaded oupling High-urrent High-Voltage Power onnectors for Rail Applications ITZ Triple-Start oupling IRT Series Rectangular Multipole High Voltage onnectors ITS 901 Series Reverse ayonet Multi-Pole Medium Voltage onnectors ITS 500 Series Reverse ayonet Single-Pole High Voltage onnectors UJ Series onnector System E Innovative tool-free locking and latching mechanisms 2015 Glenair, Inc. U.S. AGE ode E-3

212 IPT ayonet ock onnectors ETHERNET, VIDEO, AND HIGH-SPEED DATA NETWORKING OPTO-EETRONI INTERONNET SOUTIONS For size and weight savings in avionics, naval, ground tactical equipment, oil and gas, industrial, mining, in-flight entertainment, and other harsh application environments E The need for reduced weight and small form-factor components, particularly in airframe and other high-performance environments, has led Glenair to develop a revolutionary new opto-electronic product series that incorporates transmitter and receiver functions, fiber- tocopper media conversion, and signal aggregation directly into interconnect wiring systems. These harsh-environment interconnect technologies reduce size and Glenair, Inc. weight, and improve the performance of Ethernet, Video and High-Speed Digital 1211 Air Way applications by leveraging the strengths of both electrical and optical media. Glenair Glendale, A offers both standard catalog solutions, as well as the integration of electronics or opto-electronics 2015 Glenair, Inc. into rugged custom packages and cable U.S. AGE assemblies ode per customer and GENAIR, application IN. requirements AIR WAY GENDAE, A sales@glenair.com FAX E-4

213 Glenair IPT SE and IPT Series Product Index IPT ayonet ock onnectors Series IPT SE Summary of onnector Styles and ackshell A-1 IPT SE Series -1 High Performance rimp ontact - ayonet-ock Signal onnectors (MI Type) -2 High Performance rimp ontact (MI Type) - Styles and lasses -3 High Performance rimp ontact (MI Type) - Technical Data -5 How To Order - Part Number reakdown -6 VG95328 Part Number ross Reference -7 Materials and Finishes -8 ontact Dimensions - Pin and Socket -9 Arrangement Tables and Sealing Plugs -10 Available Arrangements -11 Fastener Height Requirements and Panel utout Dimensions -13 IPT 00 ASE Front Panel Mount Square Flange Receptacle with ackshell -14 IPT 00 SE Front Panel Mount Square Flange Receptacle with General Duty ackshell -16 IPT 00 ASE...N0 Front Panel Mount Square Flange Receptacle without ackshell -18 IPT 00 SE...SR Front Panel Mount Square Flange Receptacle with ackshell, able lamp and ushing. IPT 00 GSE Front Panel Mount Square Flange Receptacle with Shrink oot ackshell -22 IPT 00 MSE Front Panel Mount Square Flange Receptacle with ackshell for EMI Shield Termination and Shrink oot IPT 01 ASE In-ine able onnector with ackshell -26 IPT 01 SE In-ine able onnector with General Duty ackshell -28 IPT 01 ASE...N0 In-ine able onnector -30 IPT 01 SE...SR In-ine able onnector with ackshell, able lamp and ushing -32 IPT 01 GSE In-ine able onnector with Shrink oot ackshell -34 IPT 01 MSE In-ine able onnector with ackshell for EMI Shield Termination and Shrink oot IPT 02 SE ox Mount Square Flange Receptacle -38 IPT 02 PP Through ulkhead Receptacle -40 IPT 06 ASE Straight Plug onnector with ackshell to Accomodate MS3057 able lamp (not included) E 2015 Glenair, Inc. U.S. AGE ode E-5

214 IPT ayonet ock onnectors Glenair IPT SE and IPT Series Product Index E IPT 06 SE Straight Plug onnector with General Duty ackshell -44 IPT 06 ASE...N0 Straight Plug onnector without ackshell -46 IPT 06 SE...SR Straight Plug onnector with ackshell, able lamp and ushing -48 IPT 06 GSE Straight Plug onnector with Shrink oot ackshell -50 IPT 06 MSE Straight Plug onnector with ackshell for EMI Shield Termination and Heat Shrink oot IPT 07 SE Rear Panel Mount Jam Nut Receptacle onnector with General Duty ackshell -54 IPT 07 SE...SR Rear Panel Mount Jam Nut Receptacle onnector and ackshell with able lamp and ushing IPT 07 GSE Rear Panel Mount Jam Nut Receptacle onnector with Shrink oot ackshell IPT 07 MSE Rear Panel Mount Jam Nut Receptacle onnector with ackshell for EMI Shield Termination and Shrink oot IPT 08 MSE 90 Plug onnector with ackshell for EMI Shield Termination and Shrink oot Series IPT IPT Series -1 ayonet-ock Signal onnectors (MI Type) - Product ine Overview -2 High Performance rimp ontact (MI Type) - Styles and lasses -4 How To Order - Part Number reakdown -7 ross Section -8 Technical Data -9 Materials and Finishes -10 ontact Dimensions - Pin and Socket -11 Arrangement Tables and Alternate Positions -12 Alternate Key Positions for S9522 F Fastener Height Requirements and Panel utout Dimensions -14 Available Arrangements -15 IPT 00 A Wall Mounting Receptacle with ackshell -18 IPT 00 A...N0 Wall Mounting Receptacle without ackshell -20 IPT 00 A...PG Wall Mounting Receptacle with PG Threaded ackshell -22 IPT 00 A...PH Wall Mounting Receptacle with ackshell and PG able Gland Glenair, Inc. U.S. AGE ode E-6

215 Glenair IPT SE and IPT Series Product Index IPT ayonet ock onnectors IPT 00 A...PHM Wall Mounting Receptacle with PHM ackshell and Sleeves to Accomodate Various able Size IPT 00 A...SR Wall Mounting Receptacle with ackshell, ushing and able lamp -28 IPT 00 E Wall Mounting Receptacle with General Duty ackshell -30 IPT 00 E...SR Wall Mounting Receptacle with ackshell, ushing and able lamp -32 IPT 00 G Wall Mounting Receptacle with Shrink oot ackshell -34 IPT 00 J Wall Mounting Receptacle with ong ackshell and able lamp -36 IPT 00 M Wall Mounting Receptacle with ackshell for EMI Shield Termination and Shrink oot IPT 00 W Wall Mounting Receptacle with ong ackshell, Metal Sleeve and Gland Seal IPT 01 A In-ine able onnector with General Duty ackshell -42 IPT 01 A...N0 In-ine able onnector without ackshell -44 IPT 01 A...PG In-ine able onnector with PG Threaded ackshell -46 IPT 01 A...PH In-ine able onnector with ackshell and Plastic PG able Gland -48 IPT 01 A...PHM In-ine able onnector with PHM ackshell and Sleeves to Accommodate Various able Sizes -50 IPT 01 A...SR In-ine able onnector with ackshell, able lamp and ushing -52 IPT 01 E In-ine able onnector with General Duty ackshell -54 IPT 01 E...SR In-ine able onnector with ackshell, able lamp and ushing -56 IPT 01 G In-ine able onnector with Shrink oot ackshell -58 IPT 01 J In-ine able onnector with ackshell, able lamp and Sleeve -60 IPT 01 M In-ine able onnector with ackshell for EMI Shield Termination and Shrink oot -62 IPT 01 W In-ine able onnector with ong ackshell, Metal Sleeve and Gland Seal -64 IPT 02 PP Through ulkhead Receptacle -66 IPT 02 A and IPT 02 E ox Mounting Receptacle -68 IPT 02 Y ox Mounting Receptacle with Printed ircuit oard Terminations -70 IPT 06 A Straight Plug onnector with ackshell to Accommodate MS3057 able lamp (not included) -72 IPT 06 A...N0 Straight Plug onnector with Accessory Threads -74 IPT 06 A...AT Straight Plug onnector with Accessory Threads and Arctic oupling Nut E 2015 Glenair, Inc. U.S. AGE ode E-7

216 IPT ayonet ock onnectors Glenair IPT SE and IPT Series Product Index E IPT 06 A...PG Straight Plug onnector with PG Threaded ackshell -78 IPT 06 A...PH Straight Plug onnector with ackshell and PG able Gland -80 IPT 06 A...PHM Straight Plug onnector with PHM ackshell and Sleeves to Accommodate Various able Sizes IPT 06 A...PHM EMI67 Straight Plug onnector with ackshell for EMI Shield Termination IPT 06 A...SR Straight Plug onnector with ackshell, able lamp and ushing -86 IPT 06 E Straight Plug onnector with General Duty ackshell -88 IPT 06 E...PG Straight Plug onnector with PG Threaded ackshell -90 IPT 06 E...SR Straight Plug onnector with ackshell, able lamp and ushing -92 IPT 06 G Straight Plug onnecto r with ackshell for Heat Shrink oot -94 PT 06 J Straight Plug onnector with ong ackshell, Metal Sleeve, able Sealing Gland and able lamp -96 IPT 06 W Straight Plug onnector with ong ackshell and able Sealing Gland -98 IPT 06 M Straight Plug onnector with ackshell Suitable for EMI Shield Termination and Heat Shrink oot -100 IPT 07 A Rear ox Mount Jam Nut Receptacle onnector -102 IPT 07 E Rear Panel Mount Jam Nut Receptacle onnector with ackshell -104 IPT 07 E...SR Rear Panel Mount Jam Nut Receptacle onnector and ackshell with able lamp and ushing -106 IPT 07 Y Rear ox Mount Jam Nut Receptacle with Printed ircuit oard ontacts -108 IPT 071 YK Rear ox Mount Jam Nut Receptacle with Standoff and Printed ircuit oard ontacts -110 IPT 08 AM Plug onnector with 90 ackshell Suitable for MS3057 able lamp -112 IPT 08 A...PHM Plug onnector with 90 PHM ackshell and Sleeves to Accomodate Various able Sizes -114 IPT 08 EM Plug onnector with 90 ackshell for MS3057-A able lamp -116 IPT 08 M Plug onnector with 90 ackshell for Shield Termination and Shrink oot -118 IPT 26 A Panel Plug onnector Glenair, Inc. U.S. AGE ode E-8

217 Glenair IPT SE and IPT Series Product Index IPT ayonet ock onnectors Series IPT SE and IPT onnector Accessories and Tools IPT ayonet ock Tools and Accessories Overview D-1 IT 3057-A able lamp D-2 IT able lamp D-3 IT 3420 and IT 3420-A Neoprene Sleeve D-4 IPT and IPT 3180-F Protective Plug overs D-5 IPT 3180-S Protective Plug overs without hain D-6 IPT and IPT 3181-F Protective Receptacle overs D-7 IPT 3181-N and IPT 3181-NF Protective Jam Nut Receptacle overs D-8 IPT 3181-S Protective Receptacle overs without hain D-9 IT R and IT Y Protective Receptacle and Plug Plastic aps D-10 IPT 3115 and IPT 3115A Dummy Stowage Receptacles D and S Square Flange Panel Mount Receptacle Sealing Gaskets D-12 Sealing Plug for Wire Sealing Grommet D-13 IPT Series Tools D-14 IPT SE Series Tools D-15 E 2015 Glenair, Inc. U.S. AGE ode E-9

218 IPT ayonet ock onnectors E 2015 Glenair, Inc. U.S. AGE ode E-10

219 Glenair?