380 F H 103 M A. Angle and Profile H = 45 J = 90 See page for straight. E (Table III) G (Table III) F (Table III) Cable Range Y
|
|
- Vivien Waters
- 5 years ago
- Views:
Transcription
1 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Standard Profile CONNCOR DSINAORS A-F--L-S ROAABL COUPLIN YP F INDIVIDUAL AND/OR OVRALL SILD RMINAION Product Series Connector Designator Angle and Profile = 45 J = 90 See page 38-4 for straight 380 F 3 M A Strain Relief Style (, A, M, D) ntry (able, I) Shell Size (able I) Finish (able II) Basic Part A hread (able I) C yp. (able I) F.88 (22.4) SYL 2 (See Note 1) SYL eavy Duty (able ) SYL A SYL M SYL D.135 (3.4) Range V Range Y Range Y ntry 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 8 -Mail: sales@glenair.com
2 380-3 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Standard Profile 38 Shell Size Conn. Desig. A-F-L-S (.2).664 (.9).688 (17.5).705 (17.9).732 (18.6).748 (19.0).773 (19.6).800 (.3).823 (.9) ABL III: LBO DIMNSIONS F (25.8) (26.5) (27.1) (27.8) (.3) (29.1) (30.1) (30.9).8 (.6).870 (22.1).9 (23.4).980 (.9) 1.0 (25.9) 1.0 (27.4) (29.0) 1.0 (30.5) (30.1) 1.5 (31.6) (33.4) (35.4) (36.7) (40.8) ABL II: SANDARD FINISS LNAIR SYMBOL FINIS B Cadmium Plate, Olive Drab M lectroless Nickel NF Cadmium Plate, Olive Drab Over lectroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged ables I and II (.6).905 (23.0) (27.7) 1.1 (.5) ABL : CABL NRY V Range Min.957 (.3).5 (3.2) (29.1).250 (6.4) (33.8).3 (7.9) (33.8).350 (8.9) (39.4).500 (.7) (45.0) (53.7).875 (22.2) (60.0) (25.4) (70.4) 3.0 (76.7) (36.5).3 (7.9).937 (23.8) 1. hen maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions, F, and will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria modification not available for MIL- DL Series II. 03* 04* 06* 32* 40*.500 (.7).656 (.7).656 (.7).656 (.7) (30.2) (30.1) (27.3) ABL I: CABL NRY Y.843 (21.4).906 (23.0) (27.8) (30.1) 1.1 (32.5) (38.1) (43.7) 2.3 (58.7) (69.1) (75.4) (89.7).630 (.0).755 (19.2).942 (23.9) (27.1) (30.3) (35.1) (46.9) (57.3) (63.6) (70.0) (82.7) Min **.156 (4.0).188 (4.8).1 (7.1).344 (8.7).375 (9.5).438 (11.1).781 (19.8).969 (.6) (37.3) Range.250 (6.4).3 (7.9).438 (11.1) (60.3) * Not available in Style M clamp. ** Not Applicable Style D Add -445 to Specify lenair s Non-Detent, ("NSOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 9 -Mail: sales@glenair.com
3 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Low Profile CONNCOR DSINAORS A-F--L-S ROAABL COUPLIN YP F INDIVIDUAL AND/OR OVRALL SILD RMINAION Length ±.060 (1.52) Minimum Order Length 2.0 Inch (See Note 4) Product Series Connector Designator Angular Function A = 90 B = 45 S = Straight Basic Part A hread (able I) C yp. (able I) 380 F S 3 M A 6 Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (, A, M, D) (able, I) Shell Size (able I) Finish (able II) Length ±.060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) SYL 2 (SRAI See Note 1).88 (22.4) F SYL 2 (45 & 90 See Note 1) SYL eavy Duty (able ) SYL A SYL M SYL D.135 (3.4) Range V Range Y Range Y ntry 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 4 -Mail: sales@glenair.com
4 380-3 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Low Profile 38 Shell Size Conn. Desig. A-F-L-S ABL III: LBO DIMNSIONS.457 (11.6).5 (13.2).582 (14.8).645 (.4).738 (18.7).926 (23.5).926 (23.5) 1.0 (25.9) 1.0 (25.9) (29.1) F (40.7) (42.2) (43.7) (55.2) (60.0) (60.0) 2.5 (63.8) 2.5 (63.8) (65.1).500 (.7).595 (15.1).6 (15.5).700 (17.8).885 (22.5).975 (.8).975 (.8) (31.1) 1.6 (40.9) (44.0) (44.5) (52.6) 2.2 (54.9) (59.2) (59.2) (62.0) (62.0) 2.6 (66.3) ABL II: SANDARD FINISS LNAIR SYMBOL FINIS B Cadmium Plate, Olive Drab M lectroless Nickel NF Cadmium Plate, Olive Drab Over lectroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged ables I and II (.6).905 (23.0) (27.7) 1.1 (.5) ABL : CABL NRY V Range Min.957 (.3).5 (3.2) (29.1).250 (6.4) (33.8).3 (7.9) (33.8).350 (8.9) (39.4).500 (.7) (45.0) (53.7).875 (22.2) (60.0) (25.4) (70.4) 3.0 (76.7) (36.5).3 (7.9).937 (23.8) 1. hen maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions, F, and will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. ABL I: CABL NRY Y Range Min ** 03*.843 (21.4).630 (.0).156 (4.0).250 (6.4) 04*.906 (23.0).755 (19.2).188 (4.8).3 (7.9) 06*.500 (.7) (27.8).942 (23.9).1 (7.1).438 (11.1) (30.1) (27.1).344 (8.7) 1.1 (32.5) (30.3).375 (9.5) (38.1) (35.1).438 (11.1).656 (.7).656 (.7).656 (.7) (30.2) 32* (30.1) (27.3) (43.7) 2.3 (58.7) (69.1) (75.4) (46.9) (57.3) (63.6) (70.0).781 (19.8).969 (.6) * Not available in Style M clamp. ** Not Applicable Style D 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 5 -Mail: sales@glenair.com
5 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Full Radius Profile CONNCOR DSINAORS A-F--L-S ROAABL COUPLIN YP F INDIVIDUAL AND/OR OVRALL SILD RMINAION Product Series Connector Designator Angle and Profile M = 45 N = 90 See page 38-4 for straight 380 F N 3 M A Strain Relief Style (, A, M, D) ntry (able, I) Shell Size (able I) Finish (able II) Basic Part A hread (able I) C yp. (able I) F.88 (22.4) SYL 2 (See Note 1) SYL eavy Duty (able ) SYL A SYL M SYL D.135 (3.4) Range V Range Y Range Y ntry 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 6 -Mail: sales@glenair.com
6 380-3 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Full Radius Profile 38 Shell Size Conn. Desig. A-F-L-S 09.8 (.6) (22.2) (25.4) (27.0) (27.8) (29.4) (30.2) (34.1) ABL III: LBO DIMNSIONS F.875 (22.2) (25.4) (27.0) (29.4) (31.0) 1.3 (33.3) (38.1) (44.5) (50.8) 2.5 (54.0) (60.3) (30.2) 1.3 (33.3) (36.5) (39.7) (42.9) 1.8 (46.0) (49.2) (55.6) (66.7) ABL II: SANDARD FINISS LNAIR SYMBOL FINIS B Cadmium Plate, Olive Drab M lectroless Nickel NF Cadmium Plate, Olive Drab Over lectroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged ables I and II (.6).905 (23.0) (27.7) 1.1 (.5) ABL : CABL NRY V Range Min.957 (.3).5 (3.2) (29.1).250 (6.4) (33.8).3 (7.9) (33.8).350 (8.9) (39.4).500 (.7) (45.0) (53.7).875 (22.2) (60.0) (25.4) (70.4) 3.0 (76.7) (36.5).3 (7.9).937 (23.8) 1. hen maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions, F, and will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 03* 04* 06* 32* 40*.500 (.7).656 (.7).656 (.7).656 (.7) (30.2) (30.1) (27.3) ABL I: CABL NRY Y.843 (21.4).906 (23.0) (27.8) (30.1) 1.1 (32.5) (38.1) (43.7) 2.3 (58.7) (69.1) (75.4) (89.7).630 (.0).755 (19.2).942 (23.9) (27.1) (30.3) (35.1) (46.9) (57.3) (63.6) (70.0) (82.7) Min **.156 (4.0).188 (4.8).1 (7.1).344 (8.7).375 (9.5).438 (11.1).781 (19.8).969 (.6) (37.3) Range.250 (6.4).3 (7.9).438 (11.1) (60.3) * Not available in Style M clamp. ** Not Applicable Style D 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 7 -Mail: sales@glenair.com
7 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Split Shell A hread (able I) CONNCOR DSINAORS A-F--L-S ROAABL COUPLIN YP F INDIVIDUAL AND/OR OVRALL SILD RMINAION Product Series Connector Designator Angle and Profile C = Ultra-Low Split 90 D = Split 90 F = Split 45 (Note 4) 380 F D 3 M A Strain Relief Style (, A, M, D) ntry (able, I) Shell Size (able I) Finish (able II) Basic Part L* * J* C yp. (able I) F Split 45 ire Bundle (able III, Note 1) K SYL 2 (See Note 1).88 (22.4) Split 90 (able III) Ultra Low- Profile Split 90 SYL eavy Duty (able ) SYL A SYL M SYL D.135 (3.4) Range V Range Y Range Y ntry 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 1 -Mail: sales@glenair.com
8 380-3 MI/RFI Non-nvironmental Backshell ype F - Rotatable Coupling - Split Shell 38 Shell Size /09 /11 /13 14/15 /17 18/19 /21 22/23 / (11.2).500 (.7).560 (14.2).6 (15.7).680 (17.3).8 (.8).880 (22.4).940 (23.9) F (40.4) (41.9) 1.7 (43.7) (44.5) (47.0) 1.9 (48.5) (50.0) (51.6) (53.1).680 (17.3).8 (.6).870 (22.1).930 (23.6) (25.4) (26.9) 1.1 (.4) (30.0) ABL III: LBO DIMNSIONS (38.9) (40.4) (42.2) (42.9) (45.5) (47.0) 1.9 (48.5) (50.0) (51.6) J Ref.340 (8.6).270 (6.9).270 (6.9).3 (8.1).4 (.7).640 (.3).640 (.3).540 (13.7).540 (13.7) K (45.2) (49.3) (49.3) 2.0 (51.1) (52.3) (53.1) (53.1) 2.0 (56.9) 2.0 (56.9) L.681 (17.3).731 (18.6).731 (18.6).831 (21.1).981 (.9) (30.0) (30.0) (30.0) (30.0) Finction C ire Bundle.250 (6.4).375 (9.5).375 (9.5).500 (.7) (.6).905 (23.0) (27.7) 1.1 (.5) ABL : CABL NRY V Range Min.957 (.3).5 (3.2) (29.1).250 (6.4) (33.8).3 (7.9) (33.8).350 (8.9) (39.4).500 (.7) (45.0) (53.7).875 (22.2) (60.0) (25.4) (70.4).3 (7.9).937 (23.8) ABL II: SANDARD FINISS LNAIR SYMBOL FINIS B Cadmium Plate, Olive Drab M lectroless Nickel NF Cadmium Plate, Olive Drab Over lectroless Nickel See Inside Back Cover for Additional Finish Options See inside back cover fold-out or pages 13 and 14 for unabridged ables I and II. 1. hen maximum cable entry (page 21) is exceeded, Style 2 will be supplied (not available in Function C). Dimensions, F, and will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for available sizes of 45 (Function F). 5. Angular function "C", low-profile split elbow, not available with "S" connector designator. ABL I: CABL NRY Y Range Min ** 03*.843 (21.4).630 (.0).156 (4.0).250 (6.4) 04*.906 (23.0).755 (19.2).188 (4.8).3 (7.9) 06*.500 (.7) (27.8).942 (23.9).1 (7.1).438 (11.1) (30.1) (27.1).344 (8.7) 1.1 (32.5) (30.3).375 (9.5) (38.1) (35.1).438 (11.1).656 (.7) (27.3).656 (.7).656 (.7) (43.7) 2.3 (58.7) (46.9) (57.3).781 (19.8) (30.2) (69.1) (63.6).969 (.6) * Not available in Style M clamp. ** Not Applicable Style D 05 lenair, Inc. CA Code 063 LNAIR, INC. 11 AIR AY LNDAL, CA FA Series 38 - Page 111 -Mail: sales@glenair.com
MIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
More informationPlug MIL-DTL Type Fiber Optic Connector For use with MIL-T-29504/4 & /5 Termini
180-060-06 Plug MIL-TL-38999 Type iber Optic onnector or use with MIL-T-29504/4 & /5 Termini MIL-TL-38999 OW TO ORR: 180-060 XW 06--8 P N asic Number inish Symbol (Table II) onnector Style Alternate Key
More informationMil-Spec Backshells and Connector Accessories
Mil-Spec ackshells and onnector ccessories U n i t e d S t a t e s U n i t e d K i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n n Important Notice for ll uyers of Military Standard ylindrical
More informationPART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
More information06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
More information8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
More information97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
More information8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail
More informationMIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
More informationMIL-C Series 4 PART NUMBER CONSTRUCTION
MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle
More informationAS85049/88/89/90 SERIES
AS85049/88/89/90 SERIES EMI/RFI Composite Backshells MIL-DTL Specification EMI/RFI Composite Backshells Overview Features & Benefits QPL AS85049, D38999 & MS Qualified SUNBANK offers a wide range of qualified
More informationHT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
More informationD-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
More informationNFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013
NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High
More informationSeries 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
More information2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools
2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...
More information2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M
Push-Pull Receptacles Protection aps Ordering Guide for 2M667-202 Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while
More informationAmphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
More informationMIL-C Fiber Optic Connectors
Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh
More informationPART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
More informationVG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationD X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
More informationMIL-C Circular Connectors
MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers
More informationHeavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
More informationMIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )
MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:
More information2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example
Coupling nut Plugshell O-Ring O-Ring Cable clamp 2) CONNECTOR DESCRIPTION IT SERIES Figure 1: Plug Connector Example Shell ring Plugshell O-ring: Shell: The Plugshell O-Ring is designed to help to maintain
More informationMade to order cable assemblies
Think he ll ever break that hold? Nope. He s got him in a ull Nelson. SRIS 80 Made to order cable assemblies Nothing quite says "turnkey" like a factory-terminated and -tested Mighty Mouse ordset. rom
More informationSeries 804 Push-Pull Mighty Mouse Protective Cover Ordering Information
T Electronic omponents, Inc. Protective over Ordering Information and 809-198 807-198 Plug over See next page for ordering info Protect onnectors From Damage Machined aluminum covers prevent ingress of
More informationVG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES
V95351 and V96934 Qualified onnectors Series onnectors V96934 TN PIN ONNTORS N SSORIS V96934 STYL ONIURTION SRIPTION P STYL able plug with two piece shielded backshell Page 30 STYL lange mount receptacle
More informationSCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
More informationFeatures and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
More informationITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
More informationS Rear Panel Float Mount Plugs
How To Order Series 79 HOW TO ORDR Sample Part Number H-66 M N Part Number Rear Panel Float Mount Plugs SOCKT CONTCTS WITH CRIMP TRMINTION connectors are equipped with rear-panel float mounting assemblies
More informationµcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
More informationπ network filter insertion loss - attenuation (db)
MI/RFI Applications All electronics equipments Standards oncerned equipments : F, V, MIL-ST 461, GAMG 13 Typical performance capacitive filter π network filter escription Filter connectors have been developed
More informationProven Quality, Reliability & Expertise
CA Threaded Catalog Proven Quality, Reliability & Expertise ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy,
More informationMiniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationSeries 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
More informationRJF TV. Amphenol ROHS. Ethernet Connection System for Harsh Environment. Part Number Code RJF TV
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling Ordering Guide for 2M805 Plug & Receptacle 2M805 Series Connector - Alternate Series Style Service Class Insert Arrg. Contact Type Position 2M805-00X -16 C 15-37 S A SERIES
More informationTopside / Shipboard Environmental Connectors
eacrow arine Bronze opside / hipboard I-B with solder cup or crimp contacts its-mb reverse-bayonet mil-c-5015 type / VG95234 EQUIVAEN arine Bronze eries I-B connectors are compliant with VG95234, using
More informationTable of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
More informationAccessories Cannon offers a wide selection of. Accessories Selection Guide
Cannon offers a wide selection of accessories that allow the design engineers to configure the product for their exacting needs. The accessories range from the simple actuating handle to junction and backshells,
More informationCHO-SHRINK Military/Aerospace Conductive Heat Shrinkable EMI Cable Shielding System. Customer Value Proposition.
Military/erospace onductive eat Shrinkable MI able Shielding System O-BOND dhesive/sealant O-SRINK 90 Boot (onductive Side) O-BOND dhesive/sealant O-SRINK 1061 Tubing onnector Boots able Transitions Boot
More information38999 All In One! Series III Integrated Backshell
38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell
More informationREVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS
RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical
More informationTHE FASTEST CABLE TRAY SYSTEM
E FASES CABLE RAY SYSEM A FULL RANGE OF PERFORAED CABLE RAY PRODUCS MANUFACURED O E IGES SANDARDS, OFFERING IME SAVING AND ADAPABLE DESIGNS, PRACICAL SLO PAERNS AND VERSAILE ACCESSORIES. Bespoke Steel
More informationVG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A.
Series onnectors V95351 and V96934 Qualified onnectors V95351 and V96934 Qualified Products bout The V Specifications The erman ederal Office of efense Technology and Procurement (W) establishes procurement
More informationKVBS Reverse bayonet connectors for railway applications
Reverse bayonet connectors for railway applications KVBS connector series derives from the RF CVBS one and it is based on Mil-DTL-5015 and VG95234 specs. The most important advantages are the simpler and
More informationWILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
More informationP Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION
Crimp Terminated Receptacles, How To Order HOW TO ORDR Sample Part Number L-6P6 MT G Part Number Receptacles PIN CONTACTS WITH CRIMP TRMINATION connectors are designed for rear-panel mounting and are supplied
More informationTHREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
More informationAmphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
More informationHow to Order CONTACT TYPE FLANGE TYPE MOUNTING CONTACT TERMINATION
hermetically sealed connectors are designed to meet environmental conditions of extreme pressure differential. These connectors are part of the ITT Cannon D Subminiature series and are qualified to MIL-C-24308
More informationSeries 80 Mighty Mouse Technical Reference Complete Product Specification
80 Mighty Mouse Technical Reference Reference SRIPTION RQUIRMNT PROUR TRI ontact resistance S S39029 Table V Max Wire Test Voltage Size urrent rop 12 23 42 14 17 40 16 13 49 20 7.5 55 22 5 73 24 3 45 26
More information8T Series. MIL-DTL Series II
Contents Overview 8T Series - Presentation... 06 8T Series - Applications... 06 A universal product platform... 07 Space saving... 08 ox solutions... 08 Shell types... 08 Features by shell types... 09
More informationMIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
More informationConnection Systems. Bulls-Eye Subminiature Circular Connectors
Connection Systems Bulls-Eye Subminiature Circular Connectors Connection Systems Bulls-Eye Subminiature Circular Connectors Hit the target every time with our high density connectors that provide high
More informationAmphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
More informationMIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
More informationIPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
More informationSeries IPT (26482 Type) Bayonet Coupler
IPT330 eedthrough with Jack-to-Jack RJ45 Sample Part Number IPT330 02PP G 18 5E 1 7 RJ45 Category 2 IPT330 Material/inish 02PP = ront Panel Mount Square lange receptacle G = Insert grounded to shell; Omit
More informationPOLAMCO HIGH POWER CONNECTORS STYLE
POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded
More informationOCS (Oval Contact System) Connectors
offers the High Perfmance Interconnect Solution f your High Speed Needs. The OCS* (Oval Contact System) is the newest 38999 Interconnect Product offering that provides many advantages f high speed data
More informationVG95234 Qualified Bayonet-Lock Connectors
Qualified Bayonet-Lock Crimp-Contact MIL-DTL-5015 Type Electrical for Ruggedized Power and Signal Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationINTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
8LT eries Applications High density connectors for all military and aeronautical purposes. tandards MIL-C 38999 eries I - QPL approved NC 93422 HE 308 DTAT-C 5935 X 0005 (HE 308 standard) GAM/T1 list Description
More informationSUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION
RJ45 ETHERNET SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION FIELD-READY RJ45 ETHERNET MIL-DTL-5015 TYPE REVERSE-BAYONET SUPERSEAL
More information- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
More informationCF COMMERCIAL FREEWEIGHT PRODUCTS. hoistfitness.com
CF COMMERCIAL FREEWEIGHT PRODUCTS hoistfitness.com hoistfitness.com CF STANDARD PRODUCT FEATURES The CF line offers the following features: 3¾" and 3" round tubing provide a primary framework of unsurpassed
More informationEN3716 SAE AS81659 ARINC
6 DSX RTX Series series SAE AS81659 EN3716 ARINC 404 Page Introduction... 6-4 Applications... 6-5 DSX SAE AS81659 Product overview... 6-6 Technical characteristics :... 6-7 & 6-8 Electrical... 6-7 Mechanical
More informationMIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
More informationKJL. KJL MIL-DTL Series I. MIL-DTL Series I. Applications. Features
Applications Features High Performance ilitary Aircraft Commercial Airlines Communications Equipment Armored Personnel Carriers & Tanks Quick ating A three point bayonet coupling system that not only makes
More informationBetaflex flexible conduit solutions
Protect Betaflex flexible conduit solutions The highly regarded Betaflex range includes polypropylene, halogen-free, rail approved and galvanised steel conduit. A matched range of accessories and tooling
More informationMG RANGE CONTENTS. General Specification Shell Styles... 4, 5, 6. Ordering Information Connectors... 7
CONTENTS General Specification........ 3 Shell Styles..... 4, 5, 6 Ordering Information Connectors... 7 Ordering Information Protective Caps... 8 Ordering Information Square Gaskets... 8 Insert Configurations.
More informationMicro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
More informationFunctional Description HA /2008. Hydraulic Power Units SMA 05. Replaces HA /2007. p max up to 250 bar Q max up to 17 L/min
Hydraulic ower Units S 05 p max up to 250 bar Q max up to 17 L/min H 7212 6/2008 Replaces H 7212 10/2007 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine
More informationTopside / Shipboard Environmental Connectors
Seacrow Marine Bronze IPT-MB marine bronze connectors ipt-mb mil-c-26482 bayonet type / V95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AW signal cables
More informationTABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
More informationLMJ RANGE CONTENTS. Description and characteristics Shell Styles Ordering Information - Connectors... 7
CONTENTS Description and characteristics..... 3-4 Shell Styles... 5-6 Ordering Information - Connectors.... 7 Ordering Information - Crimp Tooling.... 8 Ordering Information Square Gaskets..... 8 Ordering
More informationSeries 77 Full Nelson Environmental Shrink Boots. For Tough, Dependable Sealing of Interconnect Cable Assemblies
Series 77 Full Nelson Environmental Shrink s For Tough, Dependable Sealing of Interconnect Cable Assemblies United States United Kingdom Germany France Nordic Italy Spain Japan Think he ll ever break that
More information2M Series Contacts and Tools
Crimp Type AMPS #23 #20HD #20 #16 #12 AWG Part Number Color Band 1st 2nd 3rd #22-#28 2M809-001 N/A N/A N/A #26-#30 2M809-042* Blue N/A N/A 5 Socket #22-#28 2M809-002 N/A N/A N/A Socket #26-#30 2M809-043*
More informationSIZE TABLES In-Swing Doors and Sidelights
In-Swing Doors and Sidelights (311) (292) (362) (343) (413) (394) (851) (953) (1 124) (1 105) (1 718) (1 699) (1 924) (1 902) (2 226) (2 207) 1' 0 11 2 1' 2 1' 1 1 / 1' 4 1' 3 2' 10 2' 9 3' 1 3' 8 3' 7
More informationHow to Order. M5 M5 x 0.8 U10/ UNF
Series -S-FSG Push-lock ype RoHS Speed Controller with Indicator Stainless Steel ype (Elbow/Universal) How to Order 1 ype 2 Elbow 3 Universal Body size -32UNF Port size 5 U/32-32UNF Stainless steel type
More informationConnect - Contact - Control. Circular Audio Miniature Connectors Series NF07 Series NF10 12,5 Ø max. max. cable diameter.
Connect - Contact - Control Ø Ø6 Ø9 Circular Audio Miniature Connectors Series NF07 Series NF0,5 Ø3. max. cable diameter 39.5 max. 4.5 A 58 e Connectors for audio technology: Series NF07 and NF0 Our well-proven
More informationA B C D E F G H J K L M N
icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated
More information2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
More informationMS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
More informationFAKRA Automated In-Line Connector System
FAKRA Automated In-Line Connector System Application Specification 114-32145 05 JAN 2017 Rev H All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
More informationMIL-DTL-5015, Matrix. Amphenol. Aerospace. Amphenol
mphenol --5015, atrix O O --5015, atrix esign haracteristics, ustomer Options. 433 nsert vailability and dentification. 434, 435 nsert rrangement rawings. 436-444 lass escriptions, erformance pecifications.
More informationPT/451. Subminiature cylindrical connectors PT/451
PT/451 Subminiature cylindrical connectors 3 grooves 3 rivets 5 differents keys MAIN CHARACTERISTICS E120/C Main features of each series PT/451 Series solder version (Military, aeronautics and industrial
More informationSeeSnake. Regular Push Cable. Video Inspection Equipment. Ridge Tool Company/Elyria, Ohio, U.S.A.
Regular Push Cable 0 0 0 O-Ring () Locking Sleeve Safe Ring Safety Cable () Back Up Ring Camera Whip Compression Nut Back Up Ring O-Ring 0 Spring Sleeve Cap O-Ring 0 Wire Sleeve 0 Push Bond O-Ring () Push
More information