2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M
|
|
|
- Elfrieda Palmer
- 6 years ago
- Views:
Transcription
1 Push-Pull Receptacles Protection aps Ordering Guide for 2M Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while not in use. aps come in a variety of materials, lanyard styles and lengths to accommodate specific design requirements SERIES SERVIE SHELL ATTAH- LASS SIZE MENT TYPE ODE IN INHES PULL RING OPTION 2M M 9 -G R G LUG TERMINAL, FUSED END (00) LIP KNOT (SK) ABLE TIE (WS) Part # Description 2M Protection aps Receptacles 4. TYPE.50 DIA. REF -G Nylon Rope -H -N -S -SK -T -U 5. IN INHES -5 Inch Length Wire Rope, Teflon No Attachment MEASURED AT.50 DIAMETER Sash hain Omit for attachment Type N (SEE ORDERING INFORMATION) (No Attachment) Example "-5" equals five inch length 2M PLUG OVER Nylon Rope With Slip Knot Wire Rope, No Wire Rope, Polyurethane M REPTALE OVER DIA. D DIA SERVIE LASS Material - Black Anodized (Non-conductive) Aluminum M Electroless Nickel -NF -MT -ZN -ZNU Olive Drab admium Durmalon (Ni PTFE) Olive Drab Zinc Nickel Black Zinc Nickel -Z1 Passivated -ZM Electroless Nickel 6. ODE (No Attachment) and SK (Slip Knot) Small Split (3.20) I.D (3.68) I.D (4.78) I.D (5.00) I.D (9.78) I.D (11.30) I.D (14.48) I.D (16.13) I.D (17.65) I.D (22.48) I.D (27.17) I.D (28.83) I.D (38.86) I.D (10.67) I.D (12.19) I.D (16.13) I.D (18.92) I.D (22.48) I.D (25.65) I.D (28.58) I.D (34.16) I.D. 3. SHELL SIZE PULL RING OPTION Supplied with R Pull Omit for None Protection ap, see page 100. ontact Aerospace for more information at D 53
2 Push-Pull Plug Protection aps Ordering Guide for 2M SERIES SERVIE LASS SHELL SIZE ATTAH- MENT TYPE IN INHES ODE 2M M 9 -G Part # Description 2. SERVIE LASS Material 3. SHELL SIZE 5 2M Protection aps Plug 4. TYPE Aluminum - Black Anodized (Non-conductive) -M Electroless Nickel -NF -MT -ZN Olive Drab admium Durmalon (Ni PTFE) Olive Drab Zinc Nickel G Nylon Rope -ZNU Black Zinc Nickel DE -H -N -S -SK -T -U 5. IN INHES -5 Inch Length Omit for attachment Type N (No Attachment) Example "-5" equals five inch length Wire Rope, Teflon No Attachment Sash hain Nylon Rope With Slip Knot Wire Rope, No Wire Rope, Polyurethane -Z1 Passivated -ZM Electroless Nickel 6. ODE (No Attachment) and SK (SlipKnot) Small Split 54 ontact Aerospace for more information at For Shell Size (3.20) I.D (3.68) I.D (4.78) I.D (5.00) I.D (14.48) I.D (16.13) I.D (17.65) I.D. 7, (22.48) I.D (27.17) I.D. 10, (28.83) I.D. 14, (10.67) I.D (12.19) I.D (16.13) I.D (18.92) I.D (22.48) I.D (25.65) I.D (28.58) I.D (34.16) I.D. 6. ADDITIONAL ODE (No Attachment) and SK (Slip Knot) Protection ap, see page (9.78) I.D (11.30) I.D (11.30) I.D (11.30) I.D (20.8) I.D (38.86) I.D.
3 Push-Pull Protection ap Metal Protection ap 2M and 2M M M ± DIA. OPTIONAL PULL RING ± Shell A Max. B Max. Max. Size in. mm. in. mm. in. mm MATERIALS AND FINISHES over Aluminum alloy or stainless steel O- Wire, Hardware Fluorosilicone rubber steel, passivated ontact Aerospace for more information at D 55
4 Push-Pull Plug Rubber aps Ordering Guide for 2M and 2M Push-Pull Rubber Protective aps can be used on the push-pull plugs and receptacles. These molded rubber covers are ideal for a protective splash-proof option SERIES SHELL SIZE ATTAH- MENT TYPE LANYARD ATTAH- MENT ODE ONDUTIVE RUBBER 2M G M Protection aps Plug 2M Protection aps Receptacles 2. SHELL SIZE TYPE G Nylon Rope N No Attachment 4. LANYARD 5 Inch length Example "-5" equals five inch length 5. ODE Nylon able tie, 1.77 Inch (45mm) -WS Maximum Wire Bundle Diameter SMALL RING LARGE RING -SK Slip Knot Lanyard with no -00 attachment (fused End) (3.73) I.D (3.73) I.D (3.94) I.D (5.00) I.D. For Shell Size (14.48) I.D (16.13) I.D (17.65) I.D. 7, (22.48) I.D (27.18) I.D. 10, (28.83) I.D. 14,15 6. ONDUTIVE RUBBER Omit for Standard Neoprene 5. ADDITIONAL ODE (9.78) I.D (13.11) I.D (14.81) I.D (19.4) I.D (25.76) I.D (25.78) I.D (9.78) I.D (11.30) I.D (11.30) I.D (11.30) I.D (20.8) I.D. onductive Rubber DE Protection ap, see page ontact Aerospace for more information at
5 Push-Pull Plug Rubber aps Rubber aps 2M and 2M M PLUG OVER SOLID RING LUG TERMINAL NO LUG, FUSED END (00) SLIP KNOT (SK).50 DIA. REF MEASURED AT.50 DIAMETER 2M REPTALE OVER ABLE TIE (WS) DIA. D DIA (SEE ORDERING INFORMATION) A Dia. B Dia. Dia. D Dia. Shell Size in. mm. in. ±.005 mm. ± 0.13 in. mm. in. mm over Lanyard able Tie MATERIALS Neoprene rubber blend, black.062" (1.57) diameter nylon cord, black 66 nylon, black SST locking tab steel ontact Aerospace for more information at D 57
Series 804 Push-Pull Mighty Mouse Protective Cover Ordering Information
T Electronic omponents, Inc. Protective over Ordering Information and 809-198 807-198 Plug over See next page for ordering info Protect onnectors From Damage Machined aluminum covers prevent ingress of
Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard
Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.
2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools
2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among
2M805 Tri-Start Threaded Coupling
2M805 Tri-Start Threaded Coupling Ordering Guide for 2M805 Plug & Receptacle 2M805 Series Connector - Alternate Series Style Service Class Insert Arrg. Contact Type Position 2M805-00X -16 C 15-37 S A SERIES
PART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
97 series crimp type plugs with solid shells
97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24
Made to order cable assemblies
Think he ll ever break that hold? Nope. He s got him in a ull Nelson. SRIS 80 Made to order cable assemblies Nothing quite says "turnkey" like a factory-terminated and -tested Mighty Mouse ordset. rom
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle
Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order
PART NUMBER BREAKDOWN CP A 70 1 W D H - 10
SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental
8D Series D38999 Aluminum Series
onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle
Series 801 Mighty Mouse Double-Start ACME Thread Receptacle
ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010
Amphenol 97 Series MIL-DTL-5015
Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.
TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.
This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors
Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-
PCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
HT STRAIGHT ADAPTER, WRENCH FLATS ( )
HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS
Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments
Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series
Amphenol 67 and 165 Series Miniaturized Standard Connectors
Amphenol 67 and 165 Series Miniaturized Standard Connectors 12-023-6 Amphenol Table of Contents Page No. Amphenol 67 Series Minni E General Information, Design Characteristics, Customer Options.........................
Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
MIL-DTL Series 1 Solder Type PT
MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING
06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS
MIL-C Fiber Optic Connectors
Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh
P Straight PCB Panel Mount Receptacle
How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied
Glenair Environmental and Hermetic MIL-DTL Type Bulkhead Feed-Thrus
lenair Environmental and Hermetic MIL-DTL-38999 Type ulkhead eed-thrus SETION E TALE O ONTENTS LENAIR MIL-DTL-38999 TYPE ULKHEAD EED-THRUS: MIL-DTL-38999 Type ulkhead eed-thru Product eatures...e-1 231-103-H7
Series 80 Mighty Mouse Technical Reference Complete Product Specification
Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the
MIL-DTL-83723, Series III, Matrix
MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert
2M Series Contacts and Tools
Crimp Type AMPS #23 #20HD #20 #16 #12 AWG Part Number Color Band 1st 2nd 3rd #22-#28 2M809-001 N/A N/A N/A #26-#30 2M809-042* Blue N/A N/A 5 Socket #22-#28 2M809-002 N/A N/A N/A Socket #26-#30 2M809-043*
- - Introduction. Specifications
14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ
MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )
MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:
VG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
IPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS
MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL
MIL-DTL Series IV Connectors
DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide
Features and Application
MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact
Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB
ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20
MIL-DTL Series III Connectors
RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection
HIGH DENSITY INTERCONNECTS HD38999
HIGH DENITY INTERCONNECT HD38999 PD-229-2 PD-208-26 A CONNECTOR THAT TART AT 9 GOE TO 87 CONTACT The HD38999 family of connectors has 30% more contact density than the highest density il pec 38999 connectors
MIL-DTL-38999Series III Composite Series
MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors
MIL-DTL 38999Series III Aluminium Series
MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI
MIL-DTL-83723, Series III, Pyle
TALE OF CONTENTS Table of Contents....................... 37 Design Features, Customer Options, Manufacturer s Specifications. 38, 39 Quick Reference of Choices - Threaded Styles......... 40-42 Quick Reference
Amphenol MIL-DTL-83723, Series III, Pyle
Amphenol MIL-DTL-83723, Series III, Pyle TALE OF CONTENTS MIL-DTL-83723, Series III, Pyle : Design Features, Customer Options, Manufacturer s Specifications. 363, 364 Quick Reference of Choices - Threaded
SJT Series. Amphenol. Aerospace. Amphenol
eries TABE OF CONTENT - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Features, pecifications................... 98 How to Order, Rotations...............
Miniature Regulator Series ARJ310
Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates
MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS
QUICK REFERENCE GUIDE Wide Range Mil spec, commercial, and composite Full line of finishes, including black zinc nickel and PTFE nickel High Performance Environmentally sealed DEUTSCH MIL-DTL-38999 SERIES
Contents. Cable assemblies, Model 10.
Contents Cable assemblies, Model 10...33 Flying leads, Pigtails A11 Cable assemblies, Model 10 Main Characteristics Choice of connectors to interface with various sensor Choice of cable to suit various
REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS
RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical
MIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
NTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
D X X - XX - XX - X X
CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium
Audio Grade Receptacles Audio Grade Power Connectors Audio Grade IEC s
Audio Grade Receptacles Audio Grade Power Connectors Audio Grade IEC s Page Reference 330i, 330i Ag 350i, 350i Ag 381, 381 Ag 320i 5266i 350i HC, 350i HC Ag 320i HC 3 4 5 6 7 8 9 Introduction WATTGATE
MS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
SCE. Snatch Connector Electrical Series
SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
Features and Application
ML-DTL-83723 Series Features and Application Bayonet and Threaded Coupling Features and Application ML-DTL-83723 Series family offers connectors with bayonet and threaded coupling including lanyard-release
Shell material Insulator Contacts Sealing Temperature Mating Protection
Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid
MIL-C Series 4 PART NUMBER CONSTRUCTION
MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle
Amphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
HBB power connector. Product description
HBB power connector Product description Contact technology guarantees high reliability Push lock to mate connector Quick release latch to unmate Ruggedised metal and plastic versions available Cable and
Speed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
R49 SERIES TABLE OF CONTENTS
PRODUCT GUIDE R49 SERIES TABLE OF CONTENTS 3 Product Overview 4 Features Spotlight 5 Code Logic 6 Panel Mount Receptacle Female 7 Panel Mount Receptacle Male 8 Cable Mount Receptacle 9 Bulkhead Mount Receptacle
Amphenol Miniature Cylindrical Connectors Meets MIL-C-26482, Series 1 Specifications. Amphenol
mphenol iniature ylindrical onnectors 12-070-15 eets I--26482, eries 1 pecifications mphenol Table of ontents age o. Introduction, mphenol iniature ylindrical eneral Information, esign lexibility...................1,
Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
Product Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
POLAMCO HIGH POWER CONNECTORS STYLE
POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded
Transportation Products
Transportation Products Butterfly Valves Hopper Tees Actuators Accessories A Name You ve Trusted for Years... Resilient Seated Butterfly Valves 400 & 480 Series 1 Piece Body Design This economical, resilient
Rotations. FPT MIL-DTL Series FPT EMI/EMP. Circular Filter Connectors Features, Alternate Rotations. Filter. FPT Alternate Positions
FPT I-DT-26482 eries ircular onnectors Features, Alternate otations The Amphenol FPT eries combines the unique design features of the miniature PT eries with an EI filter. Intermateable with I-DT-26482
Amphenol. Amphenol ACA-B Reverse Bayonet Coupling Connectors
mphenol - everse ayonet oupling onnectors 12-027-1 he Industrial onnector for actory utomation, obotics, rocess ontrol and est & easurement quipment. mphenol able of ontents age o. mphenol - everse ayonet
AXLE BEAM REPLACEMENT SERVICE KITS
When sending out replacement axle beams, you must be sure to send the correct service kit for the beam size. Use the chart below to determine which service kit goes with which beam size. Illustrations
WHEN YOU NEED THE BEST IN 5015 CONNECTORS
WHEN YOU NEED THE BET IN 5015 CONNECTO 702-802-2555 www.crownconnector.com TBE OF CONTENT 5015 Connectors...................................... 2 everse Bayonet Connectors.......................... 12
AS85049/88/89/90 SERIES
AS85049/88/89/90 SERIES EMI/RFI Composite Backshells MIL-DTL Specification EMI/RFI Composite Backshells Overview Features & Benefits QPL AS85049, D38999 & MS Qualified SUNBANK offers a wide range of qualified
Miniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
JAMISON-B.M.P. INDUSTRIAL RAPID DOORS Frigo 2 Replacement Parts List
JAMISON-B.M.P. INDUSTRIAL RAPID DOORS Frigo 2 Replacement Parts List JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21741 USA 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL:
MIL-C Circular Connectors
MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers
OCS (Oval Contact System) Connectors
offers the High Perfmance Interconnect Solution f your High Speed Needs. The OCS* (Oval Contact System) is the newest 38999 Interconnect Product offering that provides many advantages f high speed data
CHARACTERISTIC SPECIFICATION
MICRO-D SERIES Microminiature connectors with solder bucket termination ESCC 3401/029 Features and Benefits Compliant with ESA specifications High performance Micropin contact system ( twist pin spring
AE40 CATALOG D38999 CYLINDRICAL CONNECTORS FOR PCB APPLICATIONS
AE40 CATALOG D38999 CYLINDRICAL CONNECTORS FOR PCB APPLICATIONS 9452 De Soto Avenue I Chatsworth, CA 91313-2231 I Voice: 818.407.5400 I Toll Free: 800.458.4412 I Fax: 818.407.5460 I email: sales@airelectro.com
Tajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
EPIC. Pin & Sleeve Connectors PIN & SLEEVE CONNECTORS
PIN & SLEEVE CONNECTORS Reference Pin & Sleeve Overview 461 Pin & Sleeve Products Overview 462 CEE series, MULTIMAX series, ULYSSE series, ALUPRES series Pin & Sleeve Construction 464 MULTIMAX Installation
F479 HVE V PARTS LIST
F479 HVE 3000 115V PARTS LIST PARTS LIST 03-00105 18 SCREW 1/4 20 X.375 HWH NYLOC ZP 03-00179 1 GROMMET -.75 ID X 1.375 OD RUBBER 03-00208 4 RIVET 1/4 X 1/4 STL/STL ZP 8-4 03-00209 11 SCREW 1/4 20 X.50
A Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
Parameter Typical Maximum
TFOA-III 6 & 24-h Specifications TFOA-III The TFOA-III series of 6 & 24-channel fiber optic connectors are ideal for environmentally harsh conditions. The TFOA-III design utilizes the latest technology
R49 & R24 PRODUCT GUIDE
PRODUCT GUIDE Amphenol EEC, Inc. 4050 N Rockwell St Chicago IL 60618 USA P 773.463.8343 F 773.463.8344 W eecchicago.com 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Product Overview Features Spotlight
Amphenol. ACA-B and GT Series Reverse Bayonet Coupling Connectors.
mphenol - and eries everse ayonet oupling onnectors www.amphenol-industrial.com mphenol 97 eries onnectors are U recognized and recognized. or further information on your individual application requirements,
Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
ITT Cannon KJL Series MIL-DTL Series I Connectors
APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING
8D Series D38999 Composite Series
Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC
Amphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
AC-20 Multi Point Actuator
29.6 (1.17) 51.1 (2.01) 29.6 (1.17) 51.1 (2.01) Cable B 52 27.3 (2.05) (.68) 27.3 (.68) 4X Ø 5.2 ± 0.1 (.210 ±.005) Cable A 29.6 (1.17) 17.3 (.68) 80.9 (3.19) 119 (4.7) (1.17) AC-20 Multi Point Actuator
Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52 iron alloy contacts.
801-012 Series 801 Hermetic Receptacle Double-Start AM Threads How to Order Information Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52
COB ADVANTAGES Quality, lightweight, durable nylon. 20% lighter than metal. Tough/shatter-proof and easily cleaned and maintained,
LOW PRESSURE NYLON EXPANSION PLUGS 0.5 to 6 CAST ALUMINUM EXPANSION PLUGS 1 1/2 TO 36 These superior, versatile, expandable plugs are used to accommodate a wide variety of industrial applications where
Amphenol QWL Series Cylindrical Connectors Amphenol
mphenol QW eries ylindrical onnectors 12-053-4 mphenol O O escription age escription... age mphenol eavy uty ylindrical onnectors QW eries... 2 QW the environmental connector... 3 QW how to order... 4,
SMP Series. High Amperage Connectors. Rated to 1135 V AC DC
SMP Series High Amperage Connectors Rated to 1135 amps@1000 V AC DC MEMBER SMP Series Connectors are designed for use in the drilling industry. The rugged construction and design features lend themselves
Amphenol JT/LJT Subminiature Cylindrical Connectors. Amphenol JT Connectors MIL-DTL Series II Crimp and MIL-C Series II Solder
mphenol J/J ubminiature ylindrical onnectors 2-090-7 mphenol J onnectors I--38999 eries II rimp and I--27599 eries II older mphenol J onnectors I--38999 eries I rimp and I--27599 eries I older mphenol
P600 Pressure Regulator
P600 Pressure Regulator The BelGAS P600 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
INDUSTRIAL PUMPS PARTS MANUAL MODELS: M-03 D-03 M-23 M-24 G-03 G-13 WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: INDUSTRIAL PUMPS MODELS: M-03 D-03 M-23 M-24 G-03 G-13 Model No. Serial No. Date of Purchase When ordering
TGS TGS TGS SIDE MOUNTED SWEET SERVICE MECHANICAL LEVEL GAUGE TGS
- 6010 SIDE MOUNTED SWEET SERVICE www.tankgaugingsys.com Cost-effective gauging of sweet, non-corrosive fluids Magnetic gauge board for simple "tank-in-service" installations (no welding required) Fiberglass