Incline Lever Row. Use various tools and clamps in process of welding, so you could weld the items together with accuracy.

Transcription

1 Project: Incline Lever Row Page 1 of 38 Incline Lever Row NOTE: The measurements within this text and 2D documentation are given both in millimeters and inches (in brackets). This website is based on ISO measurement unit system, which is the international standard. I apologize to the people who use other measurement units; but I believe that measurements given in millimeters and inches should be adequate for everyone who would like to build this project. Besides that, on today s Internet it is easy to purchase the ruler containing all the measurement units and overcome the difficulties of any kind. Use various tools and clamps in process of welding, so you could weld the items together with accuracy. Make the components as given on drawings.

2 Parts List Project: Incline Lever Row Page 2 of 38

3 Assembly drawing Project: Incline Lever Row Page 3 of 38

4 Frame Components Project: Incline Lever Row Page 4 of 38

5 Project: Incline Lever Row Page 5 of 38

6 Project: Incline Lever Row Page 6 of 38

7 Project: Incline Lever Row Page 7 of 38

8 Project: Incline Lever Row Page 8 of 38

9 Project: Incline Lever Row Page 9 of 38

10 Project: Incline Lever Row Page 10 of 38

11 Project: Incline Lever Row Page 11 of 38

12 Project: Incline Lever Row Page 12 of 38

13 Project: Incline Lever Row Page 13 of 38

14 Project: Incline Lever Row Page 14 of 38

15 Project: Incline Lever Row Page 15 of 38

16 Project: Incline Lever Row Page 16 of 38

17 Project: Incline Lever Row Page 17 of 38

18 Project: Incline Lever Row Page 18 of 38

19 Project: Incline Lever Row Page 19 of 38

20 Project: Incline Lever Row Page 20 of 38

21 Project: Incline Lever Row Page 21 of 38

22 Project: Incline Lever Row Page 22 of 38

23 Standard Parts Project: Incline Lever Row Page 23 of 38

24 Project: Incline Lever Row Page 24 of 38 Assemblage Instruction 1. Weld the Cover 50x50 (items 13) to the Square Tubing 50x50x4 Cut Lenght 500,00mm (item 1). Make the two of these subassemblies

25 Project: Incline Lever Row Page 25 of Weld the Square Tubing 50x50x4 Cut Lenght 1350,00mm (item 2) between these two subassemblies made in the previous step. 3. Weld the Square Tubing 50x50x4 Cut Lenght 250,00mm (item 3) between two Square Tubing 50x50x4 Cut Lenght 1350,00mm (items 2) on a subassembly made in the previous step. 4. Weld the Square Tubing 40x40x2,9 Cut Lenght 431,6mm (item 5) on top of the Square Tubing 50x50x4 Cut Lenght 250,00mm (item 3) on a subassembly made in the previous step.

26 Project: Incline Lever Row Page 26 of Weld the Square Tubing 40x40x2,9 Cut Lenght 188,5 mm (items 12) to the subasembly made in the previous step. 6. Weld the Plate 1 (items 15) and Triangle Holder (items 32) to the subassembly from the previous picture.

27 Project: Incline Lever Row Page 27 of Weld the Square Tubing 40x40x2,9 Cut Lenght 125,00 mm (items 6) to the assembly made in the previous step. 8. Weld the Leg Support (item 14) to the assembly made in the previous step.

28 Project: Incline Lever Row Page 28 of Weld the Square Tubing 40x40x2,9 Cut Lenght 1400,00 mm (item 4) to the assembly made in the previous step. 10. Weld the Cover 40x40 (item 20) to the other, free end of the Square Tubing 40x40x2,9 Cut Lenght 1400,00 mm (item 4).

29 Project: Incline Lever Row Page 29 of Weld the Sheet Support (item 27) and Triangle Support (item 28) together. Make the four of these subassemblies 12. Weld the subassemblies from the previous step to the subassembly made in step 10.

30 Project: Incline Lever Row Page 30 of Fasten the Wooden Plate (item 33) to the subassembly made in the previous step using standard parts: Slotted Pan Head Screw M6x30mm (item 29), Spring Lock Washer 6 (item 30) and Hexagon Nut M6 (item 31).

31 Project: Incline Lever Row Page 31 of Weld the Square Tubing 40x40x2,9 Cut Lenght 250,00 mm (item 8) and Support (item 19) to the assembly made in the previous step.

32 Project: Incline Lever Row Page 32 of Weld the Pipe D25,4x3,2mm Cut Lenght 200,00mm (item 9) to the Main Bar 40x40mm (item 18). Chamfer the edge at the end of Pipe D25,4x3,2mm Cut Lenght 200,00mm (item 9). 16. Weld the Pipe D25,4x3,2mm Cut Lenght 600,00mm (item 10) to the assembly made in the previous step.

33 Project: Incline Lever Row Page 33 of Weld the Pipe D25,4x3,2mm Cut Lenght 150,00mm (item 11) to the assembly made in the previous step. But first chamfer the edges at the ends of Round Tubing D25,4x3,2mm Cut Lenght 150,00 (item 11). 18. Weld the Cover D25,4mm (item 21) to the assembly from the previous picture.

34 Project: Incline Lever Row Page 34 of Weld the Round Tubing D31,8x3,2mm Cut Lenght 360,00mm (item 7) and Cover D31,8mm (item 23) together. 20. Weld the Limiter (item 34) and Inside Limiter (item 22) to the assembly made in the previous step.

35 Project: Incline Lever Row Page 35 of Weld the subassembly made in the previous step to the subassembly made in step Weld the Shell (item 24) to the assembly made in the previous step.

36 23. Weld the Square tubing 40x40x2,9 (item 16) and Plate 2 (item 17) together. Project: Incline Lever Row Page 36 of Weld the Shell (item 24) to the assembly made in the previous step. 25. Fix the assembly made in the previous step to the subassembly made in step 22 using Pin 16h11 x 65 (item 25) and Split Pin 3,2x28mm (item 26).

37 Project: Incline Lever Row Page 37 of Fix the assembly from the previous step to the subassembly made in step 14 using Pin 16h11 x 65 (item 25) and Split Pin 3,2x28mm (item 26).

38 Project: Incline Lever Row Page 38 of 38