TRUMPF TRUBEND CNC press brake. Modell TRUBEND 5230 Year of manufacture 2010 Control TRUMPF TASC 6000

Transcription

1 TRUMPF TRUBEND 5230 CNC press brake Manufacturer TRUMPF Modell TRUBEND 5230 Year of manufacture 2010 Control TRUMPF TASC 6000 Machine number Press force Length of bend B0507A kn mm KISTNER GmbH & Co. KG Industriestraße Thurnau

2 TECHNICAL DATA Machine TRUBEND 5230 Press force Lenght of bend Weight, approx. Dimensions (W x D x H), approx. Width between columns Throat Work table width Installation height Working height with lower tool 100 mm Permissible upper tool height (incl. adapter) for BendGuard Y-closing speed Low Y-closing speed ( fully secured machine ) Height Y-closing speed ( basic machine ) Y-opening speed Stroke Inclination of the beam Max. stop range X Electrical system kn mm kg x x mm mm 420 mm 180 mm 615 mm mm mm 220 mm/s mm/s mm/s 220 mm/s 445 mm ± 10 mm 860 mm 42 kva Pneumatic system Quantity of hydraulic oil 6 ± 1 bar 330 l Control system TASC TFT monitor 2x40 GB hard disk Interfaces: parallel, RS232, USB, Ethernet 2 - TRUMPF TRUBEND 5230

3 6 axes backgauge Travel X1- / X2- axis 600 mm R1- / R2- axis 250 mm Z1- / Z2- axis mm Max. stop range in X direction in Z direction 860 mm mm Speed X1- / X2- axis mm/s R1- / R2- axis mm/s Z1- / Z2- axis mm/s Distance Finger Finger Finger side part 10 mm 115 mm Machine axes 3 - TRUMPF TRUBEND 5230

4 Bending aid Max. swivel angle 47 Max. working speed Max. support weight for each arm Supported side length Lower tool height adjustment range Die width adjustment range Maximum tool mass in the area of the table length extension Bending aid weight for each arm Table width 45 /s 100 kg mm mm mm 10 kg 330 kg 275 mm EQUIPMENT 6 axes backgauge One set upper tools BendGuard (for 220 mm/s) 2x bending aids Table extension 900 mm Upper tool clamping, hydraulic Lower tool displacement CNC CNC crowning User guide / Documentation Machine parameters on CD 4 - TRUMPF TRUBEND 5230

5 The most important modules 1 Upper drive and hydraulic system 6 Upper tool clamp 2 Control panel 7 TRUMPF BendGuard 3 Backgauge 8 Lower tool clamp 4 Operator console 9 Machine body 5 Beam Machine body The FEM-designed machine body is an all-steel welded construction. It consists of two side elements, the press table and a connection support. The machine frame is characterized by: Consistently high level of accuracy. Large throat for a large bending space. Easy access to the tool holder. 5 - TRUMPF TRUBEND 5230

6 Upper drive and hydraulic system The beam is driven by a high-pressure internal gear pump via a selfventilating proportional hydraulic system. An integrated path measurement system linked with high-precision pressure sensors makes it possible to compensate for machine body springback, thus ensuring the correct positioning of the beam during press brake bending. This combination has the following advantages: The press force is immediately available. A high level of positioning accuracy allows precise reproduction of bending angles, even for large-scale jobs. The machine is particularly quiet. Inclination of the beam The hydraulic cylinder pairs on each side can be triggered separately. This allows a defined inclined position of the beam to be programmed. Automatic shutdown system for the hydraulics The hydraulics is automatically switched off after the downtime specified under Technology, "Program parameters", "Hydraulics switch off time" Beam The beam is suspended spherically in the machine frame. Its main features include: Consistently high level of accuracy. High level of bending rigidity. 6 - TRUMPF TRUBEND 5230

7 Control panel The TruBend Series 5000 is equipped with the TASC 6000 control unit as standard equipment. 1 User interface 2 Impact button EMERGENCY STOP 3 Numerical keyboard with <Enter> 4 Cursor key 5 START 6 STOP 7 Keyboard with mouse Operation via touchscreen The control panel of the TruBend Series 5000 is equipped with a touchscreen. Keyboard or softkey entries are a thing of the past: simply press the desired point on the user interface. Using the keyboard or the mouse to make entries is also possible. 7 - TRUMPF TRUBEND 5230

8 MACHINE PICTURES 8 - TRUMPF TRUBEND 5230

9 9 - TRUMPF TRUBEND 5230

10 TRANSPORT A Distance between the lifting brackets: mm (84.88 in) D Diameter: 80 mm (3.15 in) X Distance upper edge - center of the lifting holes: 176 mm (6.93 in) Thickness of the lifting brackets: 80 mm (3.15 in) 10 - TRUMPF TRUBEND 5230

11 Thank you very much for your interest Source for technical details: user guide TRUMPF TruBend Serie 5000 Version 02/2008 *We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.* KISTNER GmbH & Co. KG Industriestraße Thurnau