AMADA EMZ 3510 NT. KISTNER GmbH & Co. KG. Industriestraße 7-9 D Thurnau Tel. (+49)

Transcription

1 AMADA EMZ 3510 NT KISTNER GmbH & Co. KG Industriestraße 7-9 D Thurnau Tel. (+49)

2 LIST OF CONTENTS Machine info Technical data Machine pictures.. Inspection report.. Floor plan Foundation plan.. Transport data

3 MACHINE INFO Manufacturer Type Year of manufacture Control Machine number Press drive Punching force Clamps Max. sheet thickness Max. sheet size Traversing X Traversing Y Turret Max. traversing speed Electric connection with safety device and cabinet / cooler *Very large and extensive stamping tools equipment 3

4 TECHNICAL DATA Turret punch press machine Punching capacity Turret Max. material size Max. material thickness Max. material weight Traversing Y Traversing X Positional deviation Strokes per minute Max. stroke lenght Max. feed speed Turret speed Electrical power Air demand: - Macine incl. Air Blow - Air Jet Vakuum Operating pressure Machine lenght Machine width Machine height Machine weight 4

5 Machine overview Front view 1 Mirror 3 Control panel B 4 Control panel tool change lift 5 Tool change lift 6 Control panel A 7 Manually roatate turret button 8 Compressed air unit 5 Back view

6 Top view 1 Cabinet Clamping bracket slide rail 3 Clamping bracket slide 4 Clamping device 5 Machine table 6 Main control panel 6

7 Machine punching area Hole depth Zero point distance X-axis Zero point distance Y-axis Traversing X-axis Traversing Y-axis per rail internal rail (100) middle rail (00) external rail (300) 1 Hole depth Punching center 3 Distance X-axis 4 Stop clamps 5 Distance Y-axis 6 Stop X-end stop Position der Niederhalter 1 Turret (diameter 1.00 mm) Hold-down clamp (diameter 4 mm) 7

8 Control NC-Model Number controlled axes Input unit Programming Input resolution - during rotation Storage capacity Operating conditions Ambient temperature Maximum relative humidity Lighting Transformer Model Power rating Primary rated voltage Secondary rated voltage Primary nominal current Secondary nominal current Frequency Securing supply transformer (protection max.) Class of insulation Protection Dimensions L x W x H Gross weight with packaging Weight 8

9 Transformer TG 14 Sound level Information about the noise emissions L A eq 86,5 db (A) L A eq 91,0 db (A)* L A eq 86,6 db (A) L p peak-value < 130 db Measuring height 1,6 m from the floor Measuring procedure according to ISO 8500 * 91,0 db (A) > 85 db (A) 9 Position A: 91,0 db (A), max. sound level Position B: 88,3 db (A) Position C: 89,7 db (A) Position D: 88,5 db (A) Sound intensity of turret punching machine: LWA = 107,33 db (A) (54, mw) when fully loaded Measurement according to Norm ISO

10 Stamping tools 10

11 MACHINE PICTURES 11

12 1

13 INSPECTION REPORT 13 AMADA EMZ 3510 NT

14 14

15 15

16 FLOOR PLAN All dimensions are in mm 16 1 Transformer Security barrier 3 Maintenance door safety area 4 Photoelectric sensor 5 Main control panel 6 Compressed air connection 7 Power supply of the transformer

17 FOUNDATION PLAN All dimensions are in mm 17

18 TRANSPORT DATA Transport weight turret punching machine without packaging Transport weight machine tables without packaging Transport weight main control panel Lifting turret punch press 1 Lifting points Squares < 60 3 Lenght= Stand strenght= 50 mm 18 Lift control panel

19 Transport dimensions Transport dimensions of the machine including transport case L x W x H without transport case L x W x H Transport dimensions of the machine tables (x) including transport case L x W x H without transport case L x W x H Transport weight of the machine (incl. case) Transport weight of the machine (without case) Weight of the machine tables (incl. case) Weight of the machine tables (without case) 19

20 Thank you very much for your interest *We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*