Pega 345 Queen with 04PC Control Layout Drawings

Transcription

1 Amada America Inc Firestone Blvd. Buena Park CA Phone: (714) Fax: (714) Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 1 of 9

2 Warning Qualified personnel must complete all work. Do not apply power to the Pega 345 until an A.E.S.I. (Amada Engineering and Service Incorporated) Engineer is present and has instructed you to do so. Not all information required for proper installation, of the Pega 345 is included with this document. Specific details for proper installation are found in the document Pega 345 with 04PC User Pre-installation Guide available at the Amada America Internet web site at Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our product, some of the data contained herein may be out of date. Please check our Internet site, for the latest release of this document. Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 2 of 9

3 Table Of Contents Planning the Location of the Machine...4 Plan View - Pega 345 Queen...5 Plan View - Pega 345 Queen with V345hs Conveyor...6 Plan View - Pega 345 Queen with V345hs Conveyor and MP1225 Loader...7 End View - Pega 345 Queen...8 Elevation View - Pega 345 Queen...9 Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 3 of 9

4 Planning the Location of the Machine The following diagrams provide the details for positioning your new machine.! Not all information required for proper installation, of the Pega 345 is included with this document. Specific details for proper installation are found in the document Pega 345 with 04PC User Pre-installation Guide available at the Amada America Internet web site at No obstacles are allowed in the worksheet travel area and the ceiling must be at least 40" above the Pega 345 Queen.! All of the Recommended Safety / Maintenance areas should be used, but you must at least ensure that the doors of the 04PC control unit can be opened. Any reduction of the Recommended Safety / Maintenance areas may increase the possibility of personnel injury and increase the time and cost of installation or maintenance.! The Pega 345 Queen and 04PC control must be protected from direct sunlight or other heat sources. Exposure to direct heating sources such as infrared heaters have been shown to affect punch and die alignment. Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 4 of 9

5 Plan View - Pega 345 Queen Electrical Requirements E1 Pega 345 Queen 230 / 460 / 3 / 60 ±10% 18 kva / 3 / 60 VAC / 3 / 60 VAC Compressed Air Requirements 27.56" A1 Pega 345 Operator Control Station ft3/min. Power Supply 49.21" 04PC Control " Recomended Safety / Maintenance Area 40" From All Components " Pega 345 Queen Length 80" Maximum Travel Area 40" Material 58.47" 39.37" Work Range Y-axis Zero 19.10" 11.56" E1 45" Minimum 56" Maximum Pega 345Q 24.05" A " 54.73" " Pega 345 Queen Width 200" Maximum Travel Area 100" Material " Recomended Safety / Maintenance Area 40" From All Components Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 5 of 9

6 Plan View - Pega 345 Queen with V345hs Conveyor Electrical Requirements E1 Pega 345 Queen 230 / 460 / 3 / 60 ±10% 18 kva / 3 / 60 VAC / 3 / 60 VAC E2 P345hs Conveyor / 460 / 3 / 60 ±10%.8 kva / 3/ 60 VAC / 3 / 60 VAC / 3 / 60 VAC Compressed Air Requirements A1 Pega 345 Operator Control Station ft3/min " Recomended Safety / Maintenance Area 40" From All Components " Pega 345 Queen Length 80" Maximum Travel Area 40" Material 58.47" 39.37" Work Range 24.05" Y-axis Zero A " 11.56" 49.21" E1 04PC Control 27.56" 45" Minimum 56" Maximum Pega 345Q 73.00" E2 P345hs 46.77" Access required this area for 55.12" 54.73" " Pega 345 Queen Width 200" Maximum Travel Area 100" Material " Recomended Safety / Maintenance Area 40" From All Components Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 6 of 9

7 Plan View - Pega 345 Queen with V345hs Conveyor and MP1225 Loader Electrical Requirements E1 Pega 345 Queen 230 / 460 / 3 / 60 ±10% 18 kva / 3 / 60 VAC / 3 / 60 VAC E2 P345hs Conveyor / 460 / 3 / 60 ±10%.8 kva / 3/ 60 VAC / 3 / 60 VAC / 3 / 60 VAC E3 MP1225 Loader 200 / 3 / 60 ±10%, 10 Kva To operate at 230 / 460 VAC a step up transformer with the following service is required / 3 / 60 VAC / 3 / 60 VAC / 3 / 60 VAC Compressed Air Requirements A1 Pega ft3/min. A2 MP1225 Loader Operator Control Station ft3/min " Recomended Safety / Maintenance Area 40" From All Components " Pega 345 Queen Length 80" Maximum Travel Area 40" Material 58.47" 39.37" Work Range 24.05" Y-axis Zero A " 11.56" 49.21" 04PC Control E " 0.06 mm Pega 345Q A2 45" Minimum 56" Maximum MP1225 Xformer E3 MP1225 Material Load Position " 67.52" " MP1225 Length E2 P345hs MP1225 Forklift access required this area for material / parts loading / unloading Access required this area for slug removal " 55.73" To Edge Of MP " Pega 345 Queen Width 200" Maximum Travel Area 100" Material " MP1225 Width " Recomended Safety / Maintenance Area 40" From All Components Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 7 of 9

8 End View - Pega 345 Queen 79.88" " 35.12"* Material Pass Line 29.53" 37.99" 54.72" " 55.12" *Dimension will change with installed options Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 8 of 9

9 Elevation View - Pega 345 Queen 47.24" Throat Depth 39.37" Work Area 62.99" 79.89" 35.12"* Material Pass Line Floor Line 33.47" 27.95" 9.84" 11.02" 7.99" 33.47" 27.56" 87.60" " Print Date 03/01/2001 Revision 4.0 This document available on the World Wide Web at Page 9 of 9