LENCO WELDING ACCESSORIES LTD. SECTION 500
|
|
- Ella Park
- 6 years ago
- Views:
Transcription
1 LENCO WELDING ACCESSORIES LTD. SECTION 500 WATER COOLERS PAGE 1
2 SECTION 500 LENCO WELDING ACCESSORIES LTD. Note: Information on R2200V and R4000 available from our order desk DEFENSE ANTI-FREEZE AND PUMP LUBRICANT Provides year round protection for water coolers and other closed loop water recirculators. Part No. DF929 Dilutable DF927 Ready to use To Fill Unit: Fill reservoir with distilled water and Dynaflux Defense Anti-Freeze & Pump Lubricant for freeze protection and extended pump life. NOTE: Automotive Anti-Freeze compounds are not recommended for use in this unit as it will severely shorten pump life and void manufacturers warranty. Installation: Place unit so as not to inhibit airflow to radiator. For proper hook-up the torch out line is to be connected to the inert arc adaptor labelled water in. The torch in line is to be connected to the inert arc adaptor labelled. 15 Month Limited Warranty on All Coolers NOTE: Use of automotive anti-freeze compounds voids warranty and shortens pump life. WATER COOLERS PAGE 2
3 LENCO WELDING ACCESSORIES LTD. SECTION 500 TIGER Tig Torch Cooling System Factory set at 50 psi 2 Gallon reservoir 3.2 / 1.5 amp: 60 Hz 10,000 BTU Dimensions: 12 L x 14 W x 9 H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level through tank Net weight: 30 lbs / 13.6 kg The TIG-er Cooling System is designed for: up to 250 amps up to 250 amps Plastic Water Tank eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump features a direct drive power system reducing maintenance and vibration. No external plumbing is required because of closed loop water system. Self priming, easy change pump. Strong rigid construction designed to support power unit. Compact design. Reservoir Cap (G1001) Radiator (C2055) Fan (F3075) Reservoir (S0450) Motor (M2500) Rotary Vane Pump (P1200) Part No. TIGER TIGER-230 Description Tig Cooling System 115 v Tig Cooling System 230 v Caution: Do Not Over Tighten Fittings On Tank. Excessive Torque May Strip Fittings In Tank. WATER COOLERS PAGE 3
4 SECTION 500 LENCO WELDING ACCESSORIES LTD. ProCool II V/G COOLING SYSTEM Factory set at 50 psi adjustable to 80 psi 3 Gallon reservoir 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting 5.6 / 2.8 amp: 60 Hz 12,000 BTU Dimensions: 18 L x 14 W x 9 H Visible water level through tank Net weight: 37 lbs / 17 kg PCIIG: Rotary GEAR Pump 1.8 gpm at 50 psi Rebuildable pump PCIIV: Rotary VANE Pump 1.7 pgm at 50 psi The ProCool II V/G Cooling System is designed for: up to 500 amps up to 500 amps Resistance Welders 60 KVA 12, Degrees Differential Plastic Water Tank eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump features a direct drive power system reducing maintenance and vibration. No external plumbing is required because of closed loop water system. Strong rigid construction designed to support power unit. Self priming and easy change pump. Compact design. Pump - GEAR (P1110) Repair Kit (P3001) Pump - VANE (P1100) Reservoir (S0402) Reservoir Cap (G1001) Motor (M3000) Fan (F3075) Part No. Description PCIIG Gear Pump 115 v PCIIV Vane Pump 115 v PCIIG-230 Gear Pump 230 v PCIIV-230 Vane Pump 230 v WATER COOLERS PAGE 4 Radiator (C1050)
5 LENCO WELDING ACCESSORIES LTD. SECTION 500 VH1000 V/G COOLING SYSTEM Operates in both vertical and horizontal position Factory set at 50 psi adjustable to 100 psi 2 Gallon reservoir 115 or 230vac / 1 phase 50/60hz 5.6 / 2.8 amp: 60 Hz 12,000 BTU Dimensions: 9 L x 9 W x 26 H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Rugged polyethylene non-dent construction Visible water level through tank Net weight: 33 lbs / 15 kg VH1000G: Rotary GEAR Pump 1.8 gpm at 50 psi Rebuildable pump VH1000V: Rotary VANE Pump 1.7 pgm at 50 psi The VH1000 Cooling System is designed for: up to 500 amps up to 500 amps PLASMA Welder/Cutter up to 150 amps Resistance Welders 60 KVA 12, Degrees Differential Plastic construction contributes to quiet operation of unit. The VH1000 operates in a vertical position for welding carts or space savings, or in a horizontal position for conventional applications. Dynaflux continues to incorporate the latest available technology to develop a more economical, efficient, versatile and compact water cooler. The high strength seamless plastic design provides greater impact and compression strength, rust and dent resistance, weight reduction and greater aesthetics. The extended life pump features a direct drive power system reducing maintenance and increasing performance. Caution: Do Not Over Tighten Fittings On Tank. Excessive Torque May Strip Fittings In Tank. Radiator (C1050) (not shown) Pump - GEAR (P3000) Repair Kit (P3001) Pump - VANE (P1100) Fan (F3075) Motor (M3000) Chassis (S1200) Part No. VH1000G VH1000V VH1000G-230 VH1000V-230 Description Gear Pump 115 v Vane Pump 115 v Gear Pump 230 v Vane Pump 230 v Reservoir (S1210) Reservoir Cap (G1001) WATER COOLERS PAGE 5
6 SECTION 500 R1000G COOLING SYSTEM Factory set at 50 psi adjustable to 80 psi 3 Gallon reservoir 5.6 / 2.8 amp: 60 Hz 15,000 BTU Dimensions: 23 L x 11 W x H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level and flow sight glass Net weight: 42 lbs / 19 kg LENCO WELDING ACCESSORIES LTD. R1000G: Rotary GEAR Pump 1.8 gpm at 50 psi Rebuildable pump The R1000 Cooling System is designed for: up to 750 amps up to 750 amps PLASMA Welder/Cutter up to 200 amps RESISTANCE Welders 75 KVA INDUCTION Welding 5 KW 15, Degrees Differential Stainless steel construction eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump. No external plumbing is required because of closed loop water system. A water level float gauge and filler cap are combined in a single unit multi-purpose sight glass which enables operator to observe return water at a distance. Sight Glass Assembly (H1500) DEFENSE ANTI-FREEZE AND PUMP LUBRICANT Provides year round protection for water coolers and other closed loop water recirculators. Part No. DF929 Dilutable DF927 Ready to use Flexible Coupling (H1007) Fan (F3000) Motor (M2002) Pump - GEAR (P5000) Repair Kit (P5001) Subplate (S6001) Part No. Description R1000G Gear Pump 115 v R1000G-230 Gear Pump 230 v WATER COOLERS PAGE 6 Radiator (C4000)
7 LENCO WELDING ACCESSORIES LTD. SECTION 500 R1100V/G & R1200V/G COOLING SYSTEM Factory set at 50 psi adjustable to 100 psi 3 Gallon reservoir (R1100V/G) 10 Gallon reservoir (R1200V/G) 5.6 / 2.8 amp: 60 Hz 15,000 BTU Dimensions: 23 L x 11 W x H (R1100) 23 L x 11 W x 20 H (R1200) 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level and flow sight glass Net weight: 42 lbs / 19 kg (R1100V/G) 48 lbs / 22 kg (R1200V/G) R1100G / R1200G: Rotary GEAR Pump 1.8 gpm at 50 psi R1100V / R1200V: Rotary VANE Pump 1.7 gpm at 50 psi Equipped with patented high efficiency air filter to keep radiator clean and reduce machine maintenance. The R1100 Cooling System is designed for: up to 750 amps up to 750 amps PLASMA Welder/Cutter up to 200 amps RESISTANCE Welders 75 KVA INDUCTION Welding 5 KW 15, Degrees Differential The R1200 Cooling System is designed for: up to 800 amps up to 800 amps PLASMA Welder/Cutter up to 200 amps RESISTANCE Welders 75 KVA INDUCTION Welding 7.5 KW 15, Degrees Differential Part No. Description R1100G Gear Pump 115 v R1100V Vane Pump 115 v R1200G Gear Pump 115 v R1200V Vane Pump 115 v R1100G-230 Gear Pump 230 v R1100V-230 Vane Pump 230 v R1200G-230 Gear Pump 230 v R1200G-230 Vane Pump 230 v Sight Glass Assembly (H1500) Sight Glass Cap (H1501) Subplate (S6001) Motor (M3000) Fan (F3025) Radiator (C4000) Pump - GEAR (P1110) Repair Kit (P3001) Pump VANE (P1100) WATER COOLERS PAGE 7
8 SECTION 500 R2000G COOLING SYSTEM Factory set at 50 psi adjustable to 100 psi 6 Gallon reservoir 13.4 / 6.7 amp: 60 Hz 1 phase 230/190 vac/ 3 phase 50/60 hz 460/380 vac/ 3 phase 50/60 hz 2.6 / 1.3 amp: 60 Hz 3 phase 30,000 BTU Dimensions: 23 L x 16 W x 19.5 H 1/4 Female Pipe Fitting (water in/out) with 5/8 LH Std. Inert Gas Fitting Visible water level and flow sight glass Net weight: 68 lbs / 31 kg R2000G: Rotary GEAR Pump 3.5 gpm at 50 psi Rebuildable pump LENCO WELDING ACCESSORIES LTD. The R2000 Cooling System is designed for: up to 1,000 amps up to 1,000 amps PLASMA Welder/Cutter up to 300 amps RESISTANCE Welders 150 KVA INDUCTION Welding 10 KW 30, Degrees Differential Stainless steel construction eliminates coolant contamination due to electrolysis or chemical reactions. All units are plumbed with copper tubing and reinforced hose. New extended life pump. No external plumbing is required because of closed loop water system. A water level float gauge and filler cap are combined in a single unit multi-purpose sight glass which enables operator to observe return water at a distance. Water filter on pump inlet protects pump and extends pump life. Sight Glass Assembly (H1500) Fan (F2008) Subplate (S2002) Pump - GEAR (P2000) Repair Kit (P2001) Flexible Coupling (H1007) Motor (M2004) 1 Phase ¾ HP 115/230 vac 50/60Hz Motor (M2005) 3 Phase ¾ HP 230/460/190/380 50/60 Hz Part No. Description R2000G Gear Pump 115 v 1 ph R2000G-230/1 Gear Pump 230 v 1 ph R2000G-230/3 Gear Pump 230/190 v 3 ph R2000G-460/3 Gear Pump 460/380 v 3 ph WATER COOLERS PAGE 8 Radiator (C2011)
Issued April 2018 Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma cutting Resistance welding
Issued April 2018 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationSeries. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate Coolant
Series Issued April 2013 Index No. AY/7.2 Coolmate Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationIssued Nov Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate 3
Issued Nov. 2013 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationOperators Manual. Model 3370 Air Cooled Recirculator rev.8/98
Operators Manual Model 3370 Air Cooled Recirculator 110-080 rev.8/98 Table of contents Section 1. General Information 1.1 Warranty 1.2 Unpacking Section 2. Product Information 2.1 Description 2.2 Specification
More informationCC3060 TYPE 12 COMPACT CABINET COOLER AIR-TO-WATER FLUSH-MOUNT MODEL
CC3060 TYPE 12 CC3060 13 lbs 9,300 0.3 1 x 6 30 x 8-3/4 x 4 Efficiency: 68.8 Watts / C T based on average internal cabinet temperature. 2. CC3060 Rated cooling: 2,725 Watts mounted to an uninsulated 72
More informationManual Welding Accessories
Manual Welding Accessories SHORTSTUBS TM promote higher productivity, less waste, less cost and less inventory. Designed for easy installation of electrodes and built to last with a high impact, high heat,
More informationRepeatable welds again, and again, and again
INERTER DC CC 150 Repeatable welds again, and again, and again 5 Year * Ultima 150 comes with: Ultima 150 unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma
More informationER TRANSIT PARTS MANUAL. Cooling Section. Page 7-1. Cooling 05/97
Cooling Page 7-1 Plumbing Cummins 6BTA/6BG Page 7-2 Cooling Plumbing Cummins 6BTA/6BG 1 62190751 1 Tube - Coolant, Lower Radiator 2 61190162 3 Clamp - 2 1/16" - 3" 3 61190422 1 Hose - Rubber, Curved 2
More informationDesigned for Light to Medium Industrial Repair
ALL-IN-ONE POWER SYSTEM welder generator air compressor optional battery booster Designed for Light to Medium Industrial Repair The Air N Arc 150 is the system to choose when weight is the issue. The three
More informationP O W E R P U M P S SECTION INDEX. Proper Size & Selection G1 Series Electric...
SECTION INDEX Proper Size & Selection... 44-45 G1 Series Electric... 46-47 2 Series Electric... 48-49 G3 Series Electric... 5-51 G4 Series Electric... 52-53 P O W E R P U M P S G5 Series Electric... 54-55
More informationElectric Water Pump (EWP )
Electric Water Pump (EWP ) The revolutionary range of Davies, Craig s patented Electric Water Pumps are performance accessories suitable for most makes of engines. There are two models available: the EWP
More informationPROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL
PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL 1.1 SUMMARY A. Packaged Chillers offer a self-contained means of producing cooling liquid primarily
More informationRepeatable welds again, and again, and again
INERTER CC DC AMP 575 Repeatable welds again, and again, and again 5 Year * Ultima comes with: Ultima unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma Arc
More informationArc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources
Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources FP90 Enjoy the ease of wire feed welding at an affordable price. This unit operates on standard 115 volt household current and requires no
More informationQCP Accessories. Pressure Feed Tanks. Wheel & Handle Kits
Hydrostatic Test Pumps QCP 504-392-9464 RICE Hydro... known as the World Leader in the hydrostatic test pump manufacturing and design. With over 40 years of experience, several patents, we have over 50
More informationFluid Cooling Mobile AOHM / AOVHM Series
Fluid Cooling Mobile Series 0916 Performance Notes AO/AOVH Series with hydraulic motor Adjustable louvers (manual) High heat removal Heavy duty construction Wide flow range Heat removal up to 210,000 BTU/HR
More informationMaxstar TIG/Stick Welding
00 Series Issued March 00 Index No. DC/ Maxstar TIG/Stick Welding Power Source Quick Specs Heavy Industrial Applications Petro/Chem Fabrication Aerospace Food/Beverage Industry Mechanical Contractors Pressure
More informationThe MATHEY Pneumatic or Hydraulic Powered CGM-1
CGM-1 COLD CUTTING & BEVELING MACHINE in Pneumatic and Hydraulic versions Approved CGM-1 A Pneumatic Driven Part No.: 05.5500.559 CGM-1 O Hydraulic Driven Part No.: 05.5500.560 The CGM Cold Cutting and
More informationFluid Cooling Brazed Plate BPSW Series
Fluid Cooling Brazed Plate BPSW Series 0916 STAINLESS STEEL CONSTRUCTION Performance Notes Short lead time Stacked plate Stainless steel Copper brazed (nickel option) Oil to water applications High performance
More informationHigh Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
More informationREMOVAL AND INSTALLATION
303-08-1 Engine Emission Control 303-08-1 REMOVAL AND INSTALLATION Exhaust Gas Recirculation (EGR) Cooler 6.4L Diesel, Vertical Cooler Item Part Number Description 1 Fuel cooler tube 2 W701317 Power steering
More informationCEX-32 LARGE CAPACITY, HEAVY DUTY ENGINE COOLANT EXTRACTION AND RE-FILLING SYSTEM
CEX-32 LARGE CAPACITY, HEAVY DUTY ENGINE COOLANT EXTRACTION AND RE-FILLING SYSTEM ESOC has developed a unique system that allows for the extraction, storing and re-filling of large capacity engine coolant
More informationDimension Multiprocess Welding
Series Issued Nov. 9 Index No. DC/19.2 Dimension Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Fabrication and Construction Heavy Manufacturing MRO Maintenance/Repair Pressure
More informationEnPak. Turn Off Your Truck Turn On Your EnPak. A revolutionary, fully integrated power system for work trucks
EnPak Turn Off Your Truck Turn On Your EnPak A revolutionary, fully integrated power system for work trucks Turn Off Your Truck Turn On Your EnPak The engine in a work truck is designed to move that truck
More information08 general Purpose Pumps
070 08 general Purpose Pumps InTRODuCTIOn Ballast Pumps Today s Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested
More informationHIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel
More informationTurn On Your EnPak. EnPak.com. Turn Off Your Truck... EnPak Mechanic Series. A revolutionary, fully integrated power system for mechanic s trucks
Turn Off Your Truck... Turn On Your EnPak A revolutionary, fully integrated power system for mechanic s trucks EnPak Mechanic Series Designed for mechanics trucks, EnPak is a powerhouse combination of
More informationPowerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT
Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Plasma Cutting What is plasma cutting? Plasma is an ionized gas that is electrically conductive giving you the ability to cut most
More informationEngine Compartment Inspection
Engine Compartment Inspection Unit Contents Student Page Student Components Learning Activities Sheet... 7 3 Abbreviated Checklist.... 7 5 Objective Sheet... 7 7 Expanded Checklist... 7 9 * Job Sheets
More informationFLUID TRANSFER SECTION 1
SECTION 1 FLUID TRANSFER HF10 FILTRATION UNIT...2 SUPER DELUXE PORTABLE FILTRATION UNIT...2 VISCOMAT OIL TRANSFER PUMPS...3 DC PUMPS VISCOMAT DC...3 HAND OPERATED PUMPS FOR OIL DRUMS...4 CLEAN OIL TRANSFER
More informationPOWER PUMPS. G1 Series - Electric. SUC-O-MATIC VALVE The 3 position / 3 way Suc-OMatic valve draws hydraulic oil. Power Pumps
Series - Electric Reservoir apacity... gallon Flow @ Rated Pressure... 9 cu.in./min. Electric Maximum Pressure... psi Powered by a V - 6HZ,. hp universal motor (4,64 rpm). Low startup voltage, draws amps
More informationVLH 504 to Air-to-Water Reverse Cycle Heat Pumps. 126 to 294 kw. 133 to 307 kw
Air-to-Water Reverse Cycle Heat Pumps VLH 504 to 1204 126 to 294 kw 133 to 307 kw Technical Brochure TM VLH-N.3GB Date : June 2005 Supersedes : TM VLH-N.2GB/07.04 Specifications Advantages Range extension
More informationOil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance
DC/DCS Oil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance All DC/DCS and Dual Fan models available with internal pressure bypass DC Motor Driven Cooling Fans Are A Low Cost Solution
More informationFluid Cooling Industrial COLW Series
Fluid Cooling Industrial COLW Series 0916 COPPER & STEEL CONSTRUCTION Performance Notes Ideal for independent cooling and filtering of system oils Utilizes a high efficient EK series shell & tube (finned
More information2800 Series 2806A-E18TAG1A Diesel Engine ElectropaK
2800 Series 2806A-E18TAG1A Diesel Engine ElectropaK 574 kwm at 1500 rpm 598 kwm at 1800 rpm Economic Power Mechanically operated unit fuel injectors with electronic control combined with carefully matched
More informationDarley UHP-HV Diesel Specification 1
Darley UHP-HV Diesel Specification 1 This dual pump is designed for either a powerhead type unit or a full module. The module provides a self-contained diesel powered slide-in type ultra high pressure
More informationPyrolance, LLC SPECIFICATIONS FOR DIESEL ENGINE DRIVEN ULTRA HIGH PRESSURE PIERCING AND FIRE FIGHTING SYSTEM L 1000 W-D
SPECIFICATIONS FOR DIESEL ENGINE DRIVEN ULTRA HIGH PRESSURE PIERCING AND FIRE FIGHTING SYSTEM L 1000 W-D 1 SPECIFICATIONS FOR FIRE FIGHTING SYSTEM FIRE FIGHTING AND PIERCING SPECIFICATIONS Scope and General
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Stick (SMAW) Flux Cored (FCAW) Air Carbon Arc (CAC-A) Cutting and Gouging. Invision 354MP
354MP/456MP Issued Aug. 27 Index No. DC/23 Invision MIG Welding Power Source Quick Specs Industrial Applications Metal Fabrication Heavy Manufacturing Construction Light Manufacturing Processes MIG (GMAW)
More informationFLUID COOLING Shell & Tube EK Series
FLUID COOLING Shell & Tube Series COPPER & STEEL CONSTRUCTION Features Compact Size High Efficiency Finned Bundle Design Low Cost Optional Patented Built-in Surge-Cushion Relief Bypass 3/16 Tube Size Heat
More information1/8 Ton J Series. Ship Loose Options: UL 1995 certification 18 month parts & labor warranty 24/7 service & support
TO THE N th DEGREE 1-800-YOU-KOOL 2625 Emerald Drive Kalamazoo, MI 49001 www.koolantkoolers.com rev May 2014 1/8 Ton J Series This compact door chiller features an air-cooled design with durable, matenance
More informationUsers Manual Professional Series Direct Drive Pump.25-2 GPM Series Safety, Operating, Installation, and Maintenance Instructions
Users Manual Professional Series Direct Drive Pump.25-2 GPM Series Safety, Operating, Installation, and Maintenance Instructions 600 S 56 th Street #9 Chandler, AZ 85226 Phone: 480-507-6478 Fax: 480-838-2232
More informationEngine Emission Control 6.7L Diesel
Page 1 of 6 SECTION 303-08: Engine Emission Control 2011 F-250, 350, 450, 550 Super Duty Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 03/12/2010 Engine Emission Control 6.7L Diesel
More informationADVANCEMIG Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps
ADVANCEMIG 200 - Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps ORDER CODE: Ex GST Inc GST $2,194.00 $2,523.10 W1107 MODEL: ADVANCEMIG 200 Type: MIG / TIG / MMA & Multifunction Part Number:
More informationWorld Class Fluid Storage & Handling Solutions
World Class Fluid Storage & Handling Solutions www.fluidall.com 800.849.0591 sales@fluidall.com Stackable Storage Solutions Our Space-Saving Multi-Fluid Storage and Handling Solutions are Backed by Decades
More informationSureFire II Lubricator
SureFire II Lubricator Automatic, Oil & Fluid Grease, Three Phase General The SureFire II Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements
More informationC/SSC. FLUID COOLING Shell & Tube C & SSC Series. Features. Materials SSC Series. Ratings Standard. Materials C Series.
FLUID COOLING Shell & Tube Series COPPER/STEEL OR STAINLESS STEEL CONSTRUCTION Features API/BASCO Interchange ASME Code Option Preferred for New Oil-Water Applications C-Series / SSC Series Rugged Steel
More informationLIFT TRUCK SPECIFICATIONS
LIFT TRUCK SPECIFICATIONS RT50 2-Wheel Drive 4-Wheel Drive RT60 2-Wheel Drive 4-Wheel Drive RT80 2-Wheel Drive 4-Wheel Drive TABLE OF CONTENTS RT50 / RT60 / RT80 2-WD / 4WD Specifications / Dimensions.
More informationPower Units / Systems
Vickers Power Units / Systems Integrated Motor Pump MP, MP22, MP45, MP75 & MP92 kw, 20 hp to 92 kw, 125 hp This edition of the Integrated Motor Pump brochure includes the following pump series: Piston
More informationMaxstar TIG/Stick Welding
200 Series Issued Jan. 2010 Index No. DC/32.0 Maxstar TIG/Stick Welding Power Source Quick Specs Industrial Applications Precision Fabrication Petro/Chemical Aerospace Food/Beverage Industry Dairy Shipboard
More informationA global leader in manufacturing highly engineered heat transfer technologies
OCA SERIES A global leader in manufacturing highly engineered heat transfer technologies Brazed Aluminum Oil Coolers Thermal Transfer Products introduces a new line of high performance oil coolers featuring
More informationMiller Legend 301 G. The Power of Blue. Quick Specs. Gas Engine-Driven Welder/Generator
Miller Legend 301 G Issued December 2002 Index No. ED/4.2 Gas Engine-Driven Welder/ Quick Specs Industrial Applications Fabrication Structural Steel Process Plant Piping Maintenance Processes (X-Ray Quality)
More informationPortable Filter Carts Models 5MF and 10MF
s Models 5MF and 10MF 161 Applications for Parker Filter Carts Filtering new fluid before putting into service Transferring fluid from drums or storage tanks to system reservoirs Conditioning fluid that
More information07 Oil Change & Diesel Transfer Pumps
064 07 Oil Change & Diesel Transfer Pumps OIL CHAngE PuMPS Porta-Quick The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes onboard any boat, because it uses the vessel s own power
More informationDynasty TIG/Stick Welding
00 Series Issued February 001 Index No. AD/.0 Dynasty TIG/Stick Welding Power Source Quick Specs Heavy Industrial Applications Precision Metal Fabrication Aerospace Bicycle Manufacturing Mechanical Contractors
More informationSyncrowave TIG/Stick Welding
DX Issued June Index No. AD/. Syncrowave TIG/Stick Welding Power Source Quick Specs Industrial Applications Precision Metal Fabrication Maintenance and Repair Light and Heavy Manufacturing Aerospace Shipbuilding
More informationS T i P E R F O R M A N C E R A D I A T O R H O S E I N S T R U C T I O N S Thank you for your purchase of SPT Performance Parts. The following instructions have been provided to you as a courtesy of Subaru
More informationAGRICULTURE HORTICULTURE GREENHOUSE
AGRICULTURE HORTICULTURE GREENHOUSE Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water
More informationAGRICULTURE HORTICULTURE GREENHOUSE
AGRICULTURE HORTICULTURE GREENHOUSE Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water
More information42C/D SERIES Ducted Chilled Water Fan Coil Unit With District Cooling Application
42C/D SERIES Ducted Chilled Water Fan Coil Unit With District Cooling Application MAXIMIZING PERFORMANCE, ENERGY SAVINGS & COMFORT MODEL NUMBER NOMENCLATURE 4 2 C E T 0 0 3 4 7 0 1 2 5 42 series CISB Code
More informationRENTAL PRICE LIST March 1, 2012
Standard Price List RENTAL PRICE LIST March 1, 2012 ENGINE DRIVEN WELDERS WEEKLY MONTHLY Air cooled 180 amp. 210.00 425.00 Air cooled 250 amp with running gear. 235.00 455.00 Air cooled propane 250 amp..
More information534E LA LANDFILL COMPACTOR. Operating Weight - w/ blade kg (50,485 lb) - w/ bucket kg (53,351 lb) Net Horsepower 169 kw (227 hp)
534E LA LANDFILL COMPACTOR Net Horsepower 169 kw (227 hp) Compaction ratio 1 : 3.5 Operating Weight - w/ blade 22 900 kg (50,485 lb) - w/ bucket 24 200 kg (53,351 lb) The best in the business for productivity
More information400 Series 404A-22G1 ElectropaK 20.3 kwm / rpm
The Perkins 400 Series engine family continues to set new standards in the compact engine market. Developed alongside customers to fulfill their needs in the generator set, compressor, agricultural and
More informationThe TR-Series are large volume,
HYDROSTATIC TEST PUMPS Model TR-Series U p to 5.5GPM 5000PSI HYDRO INC. 3500 Arrowhead Drive Carson City Nevada 89706 web site: www.ricehydro.com e-mail: ricehydro@ricehydro.com Phone: (775) 885-1280 Fax:
More informationPORTABLE LUBRICATION MANAGEMENT CATALOG. ForFluids.com
PORTABLE LUBRICATION MANAGEMENT CATALOG ForFluids.com D SERIES DRUM FILTER CART All-In-One Convenience! All-in-one convenience is what the DC-D Drum fi lter cart is all about. The simple practicality of
More information6 HP KOLHER HYDRAULIC POWER UNIT - Rev. 5 10/17/2008
ROMAC INDUSTRIES, INC. 21919 20th Avenue SE Suite 100 Bothell, WA 90821 1 800 426 9341 www.romacindustries.com Transmate 6 HP KOLHER HYDRAULIC POWER UNIT - Rev. 5 10/17/2008 Thank you for purchasing the
More informationL Series. L04 L05 (5 7.5 HP) Fixed Speed Rotary Screw Compressors
L Series L04 L05 (5 7.5 HP) Fixed Speed Rotary Screw Compressors High Performance, Low Noise & Compact Compressor Packages The L Series oil injected rotary screw compressors provide a range that combines
More informationWebtrol s Family of Pumps
www.webtrol.com Webtrol s Family of Pumps Vertical Series Booster Pumps Stainless Steel Multistage Centrifugals The Webtrol V Series multistage pumps offer technically advanced designs to meet market demands
More informationModel and Series 115 VAC INDUSTRIAL DIAPHRAGM PUMPS. PumpAgents.com - buy pumps and parts online INDUSTRIAL DIAPHRAGM PUMPS
Model 31801 and 31800 Series 115 VAC INDUSTRIAL DIAPHRAGM PUMPS INDUSTRIAL DIAPHRAGM PUMPS FEATURES Run Dry Ability Self-Priming Thermal Overload Protected Motor Easy Installation Low Amp Draw Compact
More informationRED DOT UNITS. Condensers CONDENSERS PAGE 59
CONDENSERS RED DOT UNITS Condensers PAGE 59 R-4500 Rooftop Condenser (45,000 BTU) FIRETRUCKS CRASH & RESCUE VEHICLES DUAL EVAPORATORS The R-4500 offers amazing performance for a light weight dual fan power
More informationSNS End Suction Single Stage Centrifugal Pumps
SNS End Suction Single Stage Centrifugal Pumps SNS Process Pumps Range - Efficiency by Design Sulzer s new SNS pump range has been designed to exceed the highest energy efficiency regulations across all
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 009 (changes and errors expected) Sales@SouthwestThermal.com p. 888-6-8 f. 80-484-0049 www.akgcoolers.com GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More informationCentro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
More informationProcesses MIG (GMAW)/Pulsed MIG (GMAW-P) Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)
XMT 34/456 CC/CV Issued August 21 Index No. DC/18.8 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication
More informationProduct Catalog TSE Series Scroll Central Chillers
Product Catalog TSE Series Scroll Central Chillers Contents Features...1 Available Options...3 Hot Gas Bypass Valve... 3 Rotary Non-Fused Disconnect Switch... 3 Integral Reservoir and Pumping System...
More informationManufacturing of: Vehicle Mounted Generators Hydraulic Generators
Setting the Standard in Mobile Power Instruction Manual for Model HYDRO ARC-S-6500 JSBC Hydraulic Generator Welder Manufacturing of: Vehicle Mounted Generators Hydraulic Generators P.O. Box 582 Chester,
More informationProduct Catalog TSE Series Scroll Central Chillers
Product Catalog TSE Series Scroll Central Chillers Contents Features...1 Hot Gas Bypass Valve... 2 Rotary Non-Fused Disconnect Switch... 2 Integral Reservoir and Pumping System... 3 Remote Condenser Coil
More informationPower Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial
Power Units Page (M) = Mobile (I) = Industrial () = Mobile & Industrial (I) 143-144 (I) 145-152 (I) 145-152 (I) 145-152 Power Units (Industrial) D-Pak 5 Gallon D-Pak style power units are ideal for many
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationSound Proof Diesel Generator. Welders
Sound Proof Diesel Generator Welders Railways are the arteries of our society. They move vast numbers of people, livestock, products, and immense quantities of raw materials every day. Damaged or worn
More information30GX AIR-COOLED LIQUID CHILLER
30GX-5SB 30GX080-265 AIR-COOLED LIQUID CHILLER PERFORMANCE DATA FIELD WIRING DIAGRAM 1998 Carrier Corporation Syracuse, New York 13221 Form 30GX-5SB Supersedes 30GX-4SB Printed in U.S.A. 5-98 Catalog No.
More informationEnhanced low-end performance for stainless steel and thin-metal applications.
XMT 400 CC/CV Issued January 2004 Index No. DCX/18.92 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck and Trailer Manufacturing Fabrication
More informationPowerCut 900/1600 PLASMA CUTTING EQUIPMENT
PowerCut 900/1600 PLASMA CUTTING EQUIPMENT Powerful, durable, simple Rugged steel case Torch wrap and wear part kit holder Glass-reinforced nylon handles/ guards Digital panel Trigger lock function (2/4
More informationMRC 150/300 USER MANUAL. 1 Laird Technologies
MRC 150/300 USER MANUAL 1 www.lairdtech.com Laird Technologies THR-UM-MRC150-300 0912 Americas: +1 888.246.9050 Europe: +44.1342.315044 Asia: +886.3.312.9292 clv.customerpos@lairdtech.com 2 www.lairdtech.com
More informationProcesses MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux-Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)
XMT 350/450 Series Issued July 2012 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication
More informationSmall Kangaroo Cutter
CUES introduces NEW and improved air cutter motor for the small Kanagaroo cutter line! These conventional towed cutters are rugged, waterproof, and built to withstand shock and vibration. The cutters are
More informationWeld Preheating and Stress Relieving. Process. Induction Heating. Input Power VAC, 3-Phase, 60 Hz
ProHeat 35 Weld Preheating and Stress Relieving Issued July 2005 Index No. IN/11.0 Induction Heating System Quick Specs Applications Maintenance Construction Transmission Pipeline Power Piping Petrochemical
More informationMICROPUMP MAG-DRIVE GEAR PUMPS
MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated
More informationSuggested Spares Guide L4160F-111
Consumables, Approximate 1 Year Supply (calculated at 2000 hours/year) Allied P/N Description On-Hand Quantity (Recommended) 219374 Grease 20 Gallons 219372 Transmission Fluid 44 Gallons 219371 Hydraulic
More informationsingle stage rotary vane pumps KINNEY
single stage rotary vane pumps KINNEY KVA/KVAH MODEL FLOW ULT. VAC. MOTOR OIL CAP RPM INLET OUTLET M^3/HR MBAR(A) HP LITRES INCHES INCHES KVA 12 10 2 0.75 0.5 1450 1/2 1/2 KVA 21 20 2 1.5 0.5 2900 1/2
More information30GX AIR-COOLED LIQUID CHILLER
30GX-4SB 30GX080-265 AIR-COOLED LIQUID CHILLER PERFORMANCE DATA FIELD WIRING DIAGRAM 1997 Carrier Corporation Syracuse, New York 13221 Form 30GX-4SB Supersedes 30GX-3SB Printed in U.S.A. 12-97 Catalog
More informationThis catalog contains the following geothermal accessory products and specification guides:
f o r r e s i d e n t i a l s y s t e m s Geothermal systems offer an effective way to cut utility costs while ensuring comfort. Heat Controller s line includes two stage and single stage geothermal heat
More informationReliable fuel effi cient engines. Energy effi cient compressor rotor design built to close engineering tolerances.
Key Features Reliable fuel effi cient engines. Energy effi cient compressor rotor design built to close engineering tolerances. Effi ciency supported by progressive action of compressor air inlet valve
More informationPriming Systems Installation Instructions
Priming Systems Installation Instructions System Components: Single Priming Pump: Single VAP Valve Systems: Control Panel Activated... 2 Auto Prime (Pressure Switch) Activated... 3 Multiple VAP Valve Systems...
More information2 0 1 7 D E F E Q U I P M E N T C ATA L O G 608-487-9770 www.hartlandlubes.com TD1 Features & Benefits: Great performance and quiet operation Self priming Stainless steel motor shaft Polypropylene housing
More informationTC Series Cooling Systems
TC Series Cooling Systems Table of Contents Table of Contents...1 List of Figures...1 Safety...2 Introduction...2 General Specifications...2 Types of Coolant...2 Routine Maintenance...2 Surge Tank Coolant
More informationValves and Equipment
DOT/ASME LPG VALVES & TANK EQUIPMENTContainer Valves and Equipment Multi-Service Valve PG. 34 420 Multivalve PG. 35 Underground Multi-Service Valve PG. 36 Underground Multi-Service Valve with Integrated
More informationAC Leak Freeze AIR CONDITIONING. AC Leak Freeze permanently seals leaks in air conditioning and refrigeration systems
AC Leak Freeze AC Leak Freeze permanently seals leaks in air conditioning and refrigeration systems Will continue to seal additional Leaks for up to 1 year that meet testing specifications Does not contain
More information07 Oil Change & Diesel Transfer Pumps
64 07 Oil Change & Diesel Transfer Pumps OIL CHANGE PUMPS Porta-Quick The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes onboard any boat because it uses the vessel s own power
More informationThose in the know, know Takeuchi. TL12V2 Track Loader TL12V2
Those in the know, know Takeuchi TL12V2 Track Loader TL8 TL10 TL12 TL12V2 ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged and Intercooled - DOC+DPF+SCR Exhaust After Treatment - Active
More information