Price List 2017 Exactly the Right Solutions for Your Construction Project. anchored in quality. Valid from 1 st February 2017 REINFORCEMENT TECHNOLOGY

Transcription

1 FASTENING CONNECTOR MOUNTING List 2017 Exactly the Right Solutions for Your Construction Project Valid from 1 st February 2017 anchored in quality

2 FASTENING CONNECTOR MOUNTING JORDAHL: Our Company JORDAHL connects: steel, heavy loads, and a whole lot more. Countless customers around the world use our high-quality products for fastening, reinforcement, shear connections, framing, and facade connection systems. Customers choose JORDAHL for our broad product range, superior quality, excellent consultancy services and long-standing experience. Since being founded in Germany in 1907, we have been at the forefront of connection and shear reinforcement systems development. JORDAHL products, such as our anchor channels, have been fundamental in the evolution of structural engineering. Bringing lasting changes to the construction industry, they have shaped the way buildings are designed and helped make them safer around the world. JORDAHLʼs registered office and administrative headquarters Berlin We re with you every step of the way Our comprehensive range of premium products and services makes JORDAHL the perfect partner for your construction project. Premium products When you buy a JORDAHL product, you choose outstanding quality, reliability and safety standards. Our approvals are always up-to-date with the latest state of technology. Our products can be quickly delivered to you on site. Optimised delivery JORDAHL delivers at times that suit you and your project. We also have a range of standard products in our warehouse that can be delivered at short notice. Customised design services Do you need customised solutions for a project? No problem we can design and manufacture exactly what you need. Comprehensive project support We are there to offer support at every step of the way during your project. You can opt for technical support by phone, , or face-to-face with an on-site visit. We provide bespoke training and have a comprehensive range of downloadable resources available on our website. Click on Downloads to find resources such as technical brochures, approvals, certificates, installation instructions, and much more. 2 JORDAHL List /2016

3 JORDAHL Product Highlights Page 8 11 Page 8 11 Page 12 Page 12 Page 13 NEW! Page 16 Page 17 Page 19 Page Page 28 NEW! NEW! Page 32 Page 32 Page 36 Page 36 Page 38 Page 39 Page 40 Page 42 Page Page 44 Page 45 Page 48 Page 48 Page 49 Page 51 NEW! Page 53 Page 54 Page 54 Page 57 Page JORDAHL List /

4 FASTENING CONNECTOR MOUNTING Upper West in Berlin, Germany Canary Wharf London, United Kingdom Contents Fastening Technology NEW! JORDAHL Anchor Channels Anchor Channels JTA W, JTA K 8 11 Toothed Anchor Channels JXA W 12 Toothed Anchor Channels JXA-PC W 13 Toothed Anchor Channels JZA K 14 Loop Channels JSA K 14 Curved Anchor Channels JTA, JXA 15 Handrail Connection Channels JGB Facade Connection Channels JTA-RT 17 Pricing Standard and Special Cut Channel Lengths 18 Channels for Self-Drilling Screws JTB 19 JORDAHL T-Bolts for Channels Determining the Required T-Bolt Length 20 Hook-Head T-Bolts JA, JB, JE, JC Hammer-Head T-Bolts JH, JD, JG Breaking Point T-Bolts JB-SB, JH-SB 25 Toothed T-Bolts JXE, JXB, JXH, JXD, JZS Double-Notch Toothed T-Bolts JKB, JKC 27 JORDAHL Accessories for Channels Hooked-Head Sliding Nuts JGM (Forged) 28 Hammer-Head Sliding Nuts JGM (Flat Steel) 28 Channel Nuts JAM 28 Notch Toothed Shims JKZS 29 Hexagon Nuts (DIN EN ISO 4032) 29 Washers (DIN EN ISO 7089, ) 29 Spring Washers (DIN 127) 29 Hexagonal Coupling Sleeves 29 Coupling Sleeves Round 30 Flange Nuts 30 Horseshoe Shims JVS 30 Square Shims JVL 30 End Anchors JE for Anchor Channels 30 Clamping Plates KPA, KP DIN Clamping Claw SKU with Washer 31 Formwork Nail JSN 31 Channel Brackets JKO 31 Edge Protection Angles JKW 32 Turnbuckle Connections JSV 32 Turnbuckles SP 33 Eyelet Sockets 33 Ring Nuts RM (DIN 582) 33 Threaded Rods GS 33 Pressure Bolts JDS 33 Brick Tie Anchors JMA, -D, -Q, -QE 34 Nail Anchors JNA 35 Sliding Sleeves JMA-G 35 Channels for Brick Ties 35 Toothed Straps JVB-N, -V, -Z, -ZS Scaffold Shoes JG 37 NEW! NEW! 4 JORDAHL List /2016

5 New Exhibition Hall, Stuttgart, Germany EnergieVerband Arena Dresden, Germany Reinforcement Technology JORDAHL Punching Shear Reinforcement Punching Shear Reinforcement JDA, Standard Configurations Shear Reinforcement JDA-S, Standard Configurations Punching Shear Reinforcement JDA, Long Lengths 40 Shear Reinforcement JDA-S, Long Lengths 40 Punching Shear Reinforcement JDA FT-KL 40 Connector Technology JORDAHL Double Shear Connectors Double Shear Connectors JDSD 42 Double Shear Connectors JDSDQ 42 JORDAHL Accessories for Double Shear Connectors Fire-Protection Collars JBRM 43 Fire-Protection Collars JBRMQ 43 JORDAHL Accessories for Punching Shear Reinforcement Spacers AH-FBA 41 Spacers AH-FT 41 Spacers AH-DA 41 Assembly Aids JDA-Q 41 All rights reserved. Photos: page 2 source PUK, page 5 on the right H.-J. Krumnow, page 6 on the right Immoloretan Brissago. We reserve the right to make revisions within the framework of product and application related development. Subject to printing errors or mistakes. JORDAHL GmbH Nobelstr Berlin Germany JORDAHL List /

6 FASTENING CONNECTOR MOUNTING European Hansemuseum in Lübeck, Germany Residenza Blu, Ronco sopra Ascona, Oliver Switzerland Heissner Contents Facade Connection Systems NEW! JORDAHL Brickwork Support Systems Brickwork Support Brackets JVAeco+ N, NA, NU 44 Brickwork Support Brackets JVA+ N, NA, NU 44 Brickwork Support Brackets JVAeco+ P, PAR 45 Brickwork Support Brackets JVA+ P, PAR 45 Brickwork Support Brackets JVA+ E, EA 45 Brickwork Support Brackets JVAeco+ F, FAR 46 Brickwork Support Brackets JVA+ F, FAR 46 Brickwork Support Brackets JVAeco+ NFT, NAFT 46 Brickwork Support Brackets JVA+ NFT, NAFT 47 Angled Support Brackets L-DF+, L-DN+, L-F+ 47 Restoration Brackets JMK-S+ 48 Grout-in Brackets JMK+ 48 Adjustment Foot 48 Additional Components 48 Parapet Brick Anchors JAV 49 Windposts JWP 49 JORDAHL Accessories for Brickwork Support Angled Brackets JW 50 Suspension Loops JRH 50 Stainless Steel Wires ESD 50 Precast Lintel Support JFT+ 50 Threaded Loops JGS 51 Lintel Support Bracket JAW 51 Tilt Protection JVB-K, -K+ 51 Scaffold Anchors JGA +Q, +Z, Ring Bolts FIG 51 Installation Set (Brickwork Support Brackets to Anchor Channels) 52 Installation Set (Drilled Bolts for Brickwork Support) 52 Shim AGW 52 JORDAHL Accessories for Brickwork Support Wedge Adjuster, U-Plate 52 Cavity Wall Ties JLA 52 Insulation Retainers, Water Barrier Discs, ISO-Clips 52 JORDAHL Support Corbels Support Corbels JBA NJ, AJ, N, A 53 Installation Set JBA NJ, AJ 53 Installation Set JBA N, A 53 Mounting Technology JORDAHL Mounting Channels Mounting Channels JM W 54 Toothed Mounting Channels JXM W 54 Mounting Channels JM K Toothed Mounting Channels JZM K 56 Slotted Back Channels JML K 57 Toothed Slotted Back Channels JZML K 58 Curved Mounting Channels JM, JXM, JML 58 Matching JORDAHL T-Bolts for Channels Matching JORDAHL Accessories for Channels Further Information Terms of Delivery and Payment Additional Ordering Information 62 Service 63 Advice 64 Index 65 NEW! 6 JORDAHL List /2016

7 Demonstrated Quality Convincing quality and safety two other things JORDAHL stands for. Our products excel thanks to a consistently high standard of quality and demonstrated reliability. After all, our products not only go through strict internal quality controls, but are regularly tested and certified by external institutes. We have developed our own JORDAHL seal to ensure that you can recognise our first-class quality at a glance. JORDAHL SINCE 1907 MORE THAN 100 YEARS OF QUALITY European Technical Approval (ETA) The German Institute for Construction Engineering (DIBt) has issued European Technical Approval for the JORDAHL anchor channels JTA and the JORDAHL punching shear reinforcement JDA. The ETA approval assesses these products technically and in terms of quality and is based on a general European design concept that is valid without restrictions in more than 30 countries which gives maximum planning certainty even for international projects. German Technical Approval (Allgemeine bauaufsichtliche Zulassung abz) Not all building products currently have an assessment document (EAD) to obtain a European Technical Assessment (ETA). However, we still want to give our customers the certainty of tried-and-tested JORDAHL quality and a demonstrated basis for planning. The abz therefore confirms that JORDAHL products, such as the JORDAHL channels for self-drilling screws JTB and the JORDAHL double shear connectors JDSD are safe to use. These products are labelled with the Ü symbol. JORDAHL - Trapezblechbefestigungsschienen JTB JORDAHL GmbH Bauaufsichtliche Zulassung Nr. Z Berlin- Brandenburg TÜV Rheinland Certified The TÜV Quality Mark confirms that JORDAHL production undergoes strict quality control in accordance with the requirements of German and European certification procedures (ISO 9001:2008). JORDAHL List /

8 FASTENING CONNECTOR MOUNTING JORDAHL Anchor Channels Anchor Channels JTA W, JTA K ETA (European Technical Approval ETA-09/0338) abz (German Technical Approval Z ) Profile JTA W 72/48 JTA K 72/48 JTA W 55/42 Matching T-Bolts JA M 20 M 30 JA M 20 M 30 JB M 10 M 24, JE M 24 1) Round Anchor I-Anchor / Piece / Piece / Piece Channel Length Number of Number of Number of Anchors Anchors Anchors hdg A4 hdg A4 hdg per Metre/lin. m 3.5/m /m /m Weight [kg/m] Standard Cut Length Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] 1) JE M 24 is equivalent to JB M Further Information: See pages for matching T-bolts and accessories All prices incl. foam filling and nail holes Stock length = 6000 mm (-0/+50 mm) Channel overhang to end anchors mm Cut Lengths: 1050 mm < L < 6000 mm Calculation example for standard and special cut lengths: see page 18 Special lengths are subject to a 20 % surcharge due to increased production costs Anchor : Round anchor = standard version I-anchor = delivery subject to confirmation Weight per metre based on mill finish (for galvanised profiles: weight per metre + 10 %; for stainless steel profiles: weight per metre + 2 %) 8 JORDAHL List /2016

9 Profile JTA W 53/34 JTA K 53/34 JTA W 50/30 Matching T-Bolts JB M 10 M 20 JB M 10 M 20 JB M 10 M 20 Round Anchor I-Anchor / Piece / Piece / Piece Channel Length Number of Number of Number of Anchors Anchors Anchors hdg A4 hdg A4 hdg A per Metre/lin. m 4/m /m /m Weight [kg/m] Standard Cut Length Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] [10 %] and Design hdg = hot-dip galvanised / A4 = stainless steel /1.4404/ W = hot-rolled K = cold-formed Ordering Example Anchor Channels Short Pieces Profile Size Channel Length Anchor ETA Compliant JTA W 50/ A hdg CE JORDAHL List /

10 FASTENING CONNECTOR MOUNTING Anchor Channels JTA W, JTA K ETA (European Technical Approval ETA-09/0338) abz (German Technical Approval Z ) Profile JTA K 50/30 JTA W 40/22 1) JTA K 40/25 1) Matching T-Bolts JB M 10 M 20 JC M 10 M 16 JC M 10 M 16 Round Anchor I-Anchor / Piece / Piece / Piece Channel Length Number of Number of Number of Anchors Anchors Anchors hdg A4 hdg A4 hdg A per Metre/lin. m 4/m /m /m Weight [kg/m] Standard Cut Length Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] [10 %] 1) Hot-dip galvanised version also available with shortened anchors (installation height of JTA W 40/22 and JTA K 40/25 is approx. 60 mm; not part of the European Technical Approval and German Technical Approval). s on application. Further Information: See pages for matching T-bolts and accessories All prices incl. foam filling and nail holes Stock length = 6000 mm (-0/+50 mm) Channel overhang to end anchors mm Cut Lengths: 1050 mm < L < 6000 mm Calculation example for standard and special cut lengths: see page 18 Special lengths are subject to a 20 % surcharge due to increased production costs Anchor : Round anchor = standard version I-anchor = delivery subject to confirmation Weight per metre based on mill finish (for galvanised profiles: weight per metre + 10 %; for stainless steel profiles: weight per metre + 2 %) 10 JORDAHL List /2016

11 Profile JTA K 38/17 1) JTA K 28/15 Matching T-Bolts JH M 10 M 16 JD M 6 M 12 Round Anchor I-Anchor / Piece / Piece Channel Length Number of Number of Anchors Anchors hdg A4 hdg A per Metre/lin. m 5/m /m Weight [kg/m] Standard Cut Length Surcharge [10 %] [10 %] [10 %] [10 %] 1) Hot-dip galvanised version also available with shortened anchors (installation height of JTA K 38/17 is approx. 55 mm; not part of the European Technical Approval and German Technical Approval). s on application and Design hdg = hot-dip galvanised / A4 = stainless steel /1.4404/ W = hot-rolled K = cold-formed Ordering Example Anchor Channels Short Pieces Profile Size Channel Length Anchor ETA Compliant JTA K 38/ A hdg CE JORDAHL List /

12 FASTENING CONNECTOR MOUNTING Toothed Anchor Channels JXA W abz (German Technical Approval Z ) Profile JXA W 64/44 JXA W 53/34 JXA W 38/23 JXA W 29/20 Matching T-Bolts JXE M 20 M 24 JXB M 16 M 20 JXH M 12 M 16 JXD M 12 Round Anchor I-Anchor / Piece / Piece / Piece / Piece Number Number Number Number Channel Length of of of of Anchors Anchors Anchors Anchors hdg hdg A4 hdg A4 hdg per Metre/lin. m 4/m /m /m /m Weight kg/m Standard Cut Length Surcharge [10 %] [10 %] [10 %] [10 %] [10 %] [10 %] Further Information: See pages for matching T-bolts and accessories All prices incl. foam filling and nail holes Stock length = 6000 mm (- 0/+ 50 mm) Channel overhang to end anchors mm Cut Lengths: 1050 mm < L < 6000 mm Calculation example for standard and special cut lengths: see page 18 Special lengths are subject to a 20 % surcharge due to increased production costs Anchor : Round anchor = standard version I-anchor = delivery subject to confirmation Weight per metre based on mill finish (for galvanised profiles: weight per metre + 10 %; for stainless steel profiles: weight per metre + 2 %) 12 JORDAHL List /2016

13 Toothed Anchor Channels JXA - PC W Profile JXA - PC W 64/44 JXA - PC W 53/34 JXA - PC W 38/23 JXA - PC W 29/20 Matching T-Bolts JXE M 20 M 24 JXB M 16 M 20 JXH M 12 M 16 JXD M 12 Round Anchor / Piece / Piece / Piece / Piece Number Number Number Number Channel Length of of of of Anchors Anchors Anchors Anchors hdg hdg hdg hdg per Metre/lin. m 4/m /m /m /m Weight kg/m Standard Cut Length Surcharge [10 %] [10 %] [10 %] [10 %] and Design hdg = hot-dip galvanised / A4 = stainless steel /1.4404/ W = hot-rolled K = cold-formed Ordering Example for Toothed Anchor Channels JXA Profile Size Channel Length JXA W 38/ hdg Ordering Example for Toothed Anchor Channels JXA - PC Profile Size Channel Length JXA - PC W 38/ hdg JORDAHL List /

14 FASTENING CONNECTOR MOUNTING Toothed Anchor Channels JZA K abz (German Technical Approval Z ) Profile JZA K 41/22 1) Matching T-Bolts JZS M 10 M 16 Loop Channels JSA K Profile JSA K 38/17 JSA K 28/15 Matching T-Bolts JH M 10 M 16 JD M 6 M 12 Strap Round Anchor I-Anchor Incl. strap hdg Not incl. strap Incl. strap hdg Not incl. strap / m Weight kg/m Standard Cut Length Surcharge [10 %] [10 %] Channel Length Number of Anchors / Piece hdg A per Metre/lin. m 4/m Weight kg /m 2.30 Standard Cut Length Surcharge [10 %] [10 %] 1) Hot-dip galvanised version also available with shortened anchors (installation height is approx. 60 mm; not part of the German Technical Approval). s on application. Ordering Example Toothed Anchor Channels JZA Profile Size Channel Length JZA K 41/ hdg Further Information: See pages for matching T-bolts and accessories See page 18 for all information about cut lengths, anchor design etc. and Design hdg = hot-dip galvanised / A4 = stainless steel /1.4404/ W = hot-rolled K = cold-formed 14 JORDAHL List /2016

15 Curved Anchor Channels JTA, JXA R i max./min. L [m] max./m. L [m] R a Profile JTA W 72/48 K 72/48 W 55/42 W 53/34 K 53/34 W 50/30 K 50/30 W 40/22 K 40/25 K 38/17 K 28/15 Profile JXA W 38/23 W 29/20 hdg, A4 hdg, A4 hdg hdg, A4 hdg, A4 hdg, A4 hdg, A4 hdg, A4 hdg, A4 hdg, A4, A2 hdg, A4, A2 hdg, A4 hdg s on application R i = internal profile slot; R a = external profile slot and Design hdg = hot-dip galvanised A4 = stainless steel /1.4404/ A2 = stainless steel Ordering Example Curved Anchor Channels Profile Length L [m] Bending Radius [m] JTA K 38/ hdg R i = 1,00 Further Information: See pages for matching T-bolts and accessories JORDAHL List /

16 FASTENING CONNECTOR MOUNTING Handrail Connection Channels JGB, Straight Short Pieces abz (German Technical Approval Z ) Profile 1) Anchor Diameter JGB... G JGB... DA JGB... W 1) Hot-rolled profiles on request JGB K 38/17 G-... JGB K 40/25 G-... JGB K 50/30 G-... JGB K 53/34 G-... JGB K 38/17 DA-... JGB K 40/25 DA-... JGB K 50/30 DA-... JGB K 53/34 DA-... JGB K 38/17 W-... JGB K 40/25 W-... JGB K 50/30 W-... JGB K 53/34 W Installation Height H = 165 mm 12 Installation Height H = 200 mm 12 Installation Height H = 225 mm 14 Installation Height H = 320 mm 10 Installation Height H = 120 mm 10 Installation Height H = 125 mm 12 Installation Height H = 150 mm 14 Installation Height H = 250 mm 10 Installation Height H = 120 mm 12 Installation Height H = 155 mm 12 Installation Height H = 170 mm 14 Installation Height H = 240 mm Profile Length and hdg A hdg A hdg A hdg A hdg hdg A hdg A hdg A hdg A hdg A hdg A hdg A Handrail Connection Channels JGB, Corner Pieces with Reinforcing Bars (without Approval) G Profile Dimensions 170 x 170 mm Anchor Diameter JGB K 38/17 G-170 x JGB K 40/25 G-170 x JGB K 50/30 G-170 x JGB K 53/34 G-170 x hdg A hdg A hdg A hdg A Ordering Example Handrail Connection Channels JGB Profile Size Length JGB K 38/17 G 200 A4 16 JORDAHL List /2016

17 Handrail Connection Channels JGB, Corner Pieces with Headed Anchors (without Approval) DA Profile Dimensions 170 x 170 mm Anchor Diameter JGB K 38/17 DA-170 x hdg JGB K 40/25 DA-170 x JGB K 50/30 DA-170 x JGB K 53/34 DA-170 x hdg A4 hdg A4 hdg A4 s on application and Design Hot-dip galvanised version (hdg) > 50 μm (for indoor use) Profile steel and anchor B500B Stainless steel (A4) profile /1.4404/ and headed anchor B500B, and for K 38/17 headed anchor B500B NR Filling PE foam Further Information: All prices including foam filling and 2 anchors See pages for matching T-bolts and accessories Facade Connection Channels JTA-RT NEW! JTA-RT Round Anchors with Reinforcement Anchors hdg I c Profile JTA-RT W 40/22 Installation Height H = 90 mm JTA-RT W 50/30 Installation Height H = 100 mm JTA-RT W 53/34 Installation Height H = 170 mm Version Profile Length c I s on application s on application s on application Ordering Example JTA-RT Profile Version Length JTA-RT W 40/ hdg JORDAHL List /

18 FASTENING CONNECTOR MOUNTING Pricing Standard and Special Cut Channel Lengths s quoted in this list are gross prices. Calculating s : Mill finish/galvanised + gross price surcharge for increased cost of steel discount final net price : stainless steel A2 or A4 + + gross price surcharge for increased cost of steel alloy surcharge discount = final net price Standard Cut Lengths for Anchor Channels The standard cut length surcharge is 10 %. Anchor Channels with max. Anchor Spacing 200 mm: JTA K 38/17, JTA K 28/15, JXA W 29/20, JXA-PC W 29/20 Standard cut lengths Anchor Channels with max. Anchor Spacing 250 mm: JTA W 53/34, JTA W 50/30, JTA W 40/22, JTA K 53/34, JTA K 50/30, JTA K 40/25, JXA W 64/44, JXA W 53/34, JXA W 38/23, JXA-PC W 64/44, JXA-PC W 53/34, JXA-PC W 38/23, JZA K 41/22 Lengths less than 1050 mm are short lengths. Lengths above 1050 mm are cut lengths. Pricing for cut lengths (on the basis of price per metre) price per metre [ /m] length cost and alloy surcharges cut length surcharge [%] discount = final net price Standard cut lengths Anchor Channels with max. Anchor Spacing 300 mm: JTA W 72/48, JTA W 55/42, JTA K 72/48 Standard cut lengths Special Cut Lengths All other cut lengths are special cut lengths. The calculation here is based on a cut length surcharge of 20 % (increased production costs). Mounting Channels There are no standard cut lengths of mounting channels. The cutting rate shown on pages applies. 18 JORDAHL List /2016

19 Channels for Self-Drilling Screws JTB abz (German Technical Approval Z ) e JTB-uni No. of / Metre Anchor Anchors Weight Spacing per 3 m [kg/m] e Length hdg A4 JTB 60/24/3.0-uni ( Thickness 3 mm) JTB 60/22/6.0-uni ( Thickness 6 mm) End Anchor JTB-EB / Set incl. 4 Drill Screws mm hdg 7.20 e JTB-AR No. of / Metre Anchor Anchors Weight Spacing per 3 m [kg/m] e Length hdg A4 JTB 60/24/3.0-AR ( Thickness 3 mm) JTB 60/22/6.0-AR ( Thickness 6 mm) End Anchor JTB-EA / Set incl. 2 Drill Screws mm hdg 7.20 Anchor Arrangement Standard anchor spacing e = 450 mm will be delivered if not requested otherwise Further Information: All prices incl. foam filling Channel prices for stock length = 3000 mm (- 0/+ 50 mm) Weight per metre based on mill finish (for galvanised profiles: weight per metre + 10 %; for stainless steel profiles: weight per metre + 2 %) e Alternative anchor spacing e = 150 mm available on request and Design hdg = hot-dip galvanised / A4 = stainless steel /1.4404/ Ordering Example Channels for Self-Drilling Screws JTB Profile Size Anchor Distance Anchor JTB 60/24/ uni hdg JORDAHL List /

20 FASTENING CONNECTOR MOUNTING JORDAHL T-Bolts for Channels Determining the Required T-Bolt Length f l k m+s+u l l l k f m s u = T-bolt length = clamping length (thickness of the attached part) = profile lip, please see profile pages = nut height to EN ISO 4032 = washer thickness to EN ISO = T-bolt projection to EN ISO 4753 T-bolt Total m + s + u M M M M M M M M M req. l [ mm ] = l k +f + (m+s+u) Example JORDAHL anchor channel JTA K 53/34, f = 8 mm, avail. clamping length l k = 65 mm, T-bolt JB M16 zp required l = = 94.8 mm selected: JB M zp Hook-Head T-Bolts JA Hook-Head T-Bolts JB l l For profiles: W 72/48, K 72/48 Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg), Grade 4.6 JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg Hot-dip galvanised (hdg), Grade 8.8 JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg JA M hdg Stainless Steel, Quality A4-50; A4-70 JA M A JA M A JA M A For profiles: W 55/42, W 53/34, K 53/34, K 50/40, W 50/30, K 50/30, K 48/26 Thread Length l Pack Qty [Piece] / 100 Piece Zinc-plated (zp). Grade 4.6 JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp 1) JB M zp 1) ) Not for profile K 48/26 20 JORDAHL List /2016

21 Hook-Head T-Bolts JB Thread Length l Pack Qty [Piece] / 100 Piece Zinc-plated (zp). Grade 4.6 JB M zp 1) JB M zp 1) JB M zp 1) JB M zp 1) JB M zp 1) JB M zp 1) JB M zp 1) JB M zp 1) JB M zp 1) 3) JB M zp 1) 3) Zinc-plated (zp). Grade 8.8 JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp JB M zp Hot-dip galvanised (hdg). Grade 4.6 JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) ) Not suitable for profile K 48/26 2) Description of FA also applies to F4 (1.4462). 3) JB M 24 corresponds to JE M 24 but for profile W 55/42 Hook-Head T-Bolts JB Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg). Grade 8.8 JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) JB M hdg 1) 3) JB M hdg 1) 3) Stainless Steel. Quality A4-50 JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A JB M A Stainless Steel. Quality FA-70 (1.4462) 2) JB M FA JB M FA JB M FA JB M FA JB M FA JB M FA JB M FA JB M FA Further Information: All prices incl. nuts; washers to be ordered separately Ordering Example T-Bolts Thread Length mm JB M16 x zp JORDAHL List /

22 FASTENING CONNECTOR MOUNTING Hook-Head T-Bolts JE 41.5 For profile: W 55/42 Thread Length l 32.7 For profiles: W 40/22, K 40/25, K 40/22 Thread Length l l Pack Qty [Piece] Pack Qty [Piece] / 100 Piece Zinc-plated (zp), Grade 4.6 JE M zp JE M zp Hot-dip galvanised (hdg), Grade 8.8 JE M 24 x hdg JE M 24 x hdg Hook-Head T-Bolts JC / 100 Piece Zinc-plated (zp). Grade 4.6 JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp Hook-Head T-Bolts JC Thread Length l Pack Qty [Piece] / 100 Piece Zinc-plated (zp), Grade 8.8 JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp JC M zp Hot-dip galvanised (hdg), Grade 4.6 JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg Hot-dip galvanised (hdg), Grade 8.8 JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg JC M hdg Stainless Steel, Quality A4-50 JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JC M A JORDAHL List /2016

23 Hook-Head T-Bolts JC Thread Length l 1) Description of FA also applies to F4 (1.4462) For profiles: K 38/17, K 36/36, K 36/20, W 38/23 2) Thread Length l l Pack Qty [Piece] Pack Qty [Piece] / 100 Piece Stainless Steel, Quality FA-70 (1.4462) 1) JC M FA JC M FA JC M FA JC M FA Hammer-Head T-Bolts JH / 100 Piece Zinc-plated (zp), Grade 4.6 JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp JH M zp Hammer-Head T-Bolts JH Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg), Grade 4.6 JH M hdg JH M hdg JH M hdg JH M hdg JH M hdg JH M hdg JH M hdg JH M hdg JH M hdg JH M hdg JH M hdg Hot-dip galvanised (hdg), Grade 8.8 JH M hdg JH M hdg Stainless Steel, Quality A4-50 JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A JH M A ) T-bolts JH in combination with profile W 38/23 are not suitable for supporting longitudinal loads Further Information: All T-bolt prices include nuts. Washers are ordered separately. Ordering Example T-Bolts Thread Length mm JH M12 x hdg JORDAHL List /

24 FASTENING CONNECTOR MOUNTING Hammer-Head T-Bolts JD 22.4 For profiles: K 28/28, K 28/15, K 28/12, W 29/20 1) Thread Length l l Pack Qty [Piece] / 100 Piece Zinc-plated (zp), Grade 4.6 JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp JD M zp 2) JD M zp 2) JD M zp 2) JD M zp 2) Hot-dip galvanised (hdg), Grade 4.6 JD M hdg JD M hdg JD M hdg JD M hdg JD M hdg JD M hdg 2) Hammer-Head T-Bolts JD Thread Length l Pack Qty [Piece] / 100 Piece Stainless Steel, Quality A4-50 JD M 8 30 A JD M 8 50 A JD M A JD M A JD M A JD M A JD M A JD M A JD M A JD M A JD M A JD M A JD M A Hammer-Head T-Bolts JG 17.0 For profile: K 21/12 Thread Length l l Pack Qty [Piece] / 100 Piece Zinc-plated (zp), Grade 4.6 JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp JG M zp Stainless Steel, Quality A4-50 JG M 8 30 A JG M 8 40 A JG M 8 50 A ) T-bolts JD in combination with profile W 29/20 are not suitable for supporting longitudinal loads 2) JD M 12 not suitable for profile K 28/12 24 JORDAHL List /2016

25 Breaking Point T-Bolts 1) JB-SB, JH-SB Toothed T-Bolts JXE SB 60.0 l JB-SB for profiles: W 55/42, W 53/34, K 53/34, K 50/40, W 50/30, K 50/30, K 48/26 JH-SB for profiles: K 38/17, K 36/36, K 36/20, W 38/23 Thread Length l Pack Qty [Piece] Zinc-plated (zp), Grade 4.6 JB M 12 x 60 - SB zp JB M 12 x 60 - SB zp s on JH M 12 x 60 - SB zp request JH M 12 x 60 - SB zp 1) With breaking point (SB) for concrete formwork, for example for formwork carriage in tunneling Ordering Example Breaking Point T-Bolts / 100 Piece s on request Thread Length mm JB M12 x 60 - SB 20 zp For profiles: JXA and JXM W 64/44 Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg), Grade 8.8 JXE M hdg JXE M hdg JXE M hdg JXE M hdg JXE M hdg JXE M hdg Stainless Steel, Quality FA-70 (1.4462) 2) JXE M FA JXE M FA JXE M FA JXE M FA ) Description of FA also applies to F4 (1.4462) Toothed T-Bolts JXB 41.6 l Further Information: All T-bolt prices include nuts. Washers are ordered separately. For profiles: JXA and JXM W 53/34 Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg), Grade 8.8 JXB M hdg JXB M hdg JXB M hdg JXB M hdg JXB M hdg JXB M hdg JXB M hdg 25 P.O.A. Stainless Steel, Quality FA-70 (1.4462) 3) JXB M FA JXB M FA JXB M FA P.O.A. JXB M FA JXB M FA JXB M FA P.O.A. 3) Description of FA also applies to F4 (1.4462) JORDAHL List /

26 FASTENING CONNECTOR MOUNTING Toothed T-Bolts JXH Toothed T-Bolts JXD 20.9 l l For profiles: JXA and JXM W 38/23 Thread Length l Pack Qty [Piece] / 100 Piece Zinc-plated (zp), Grade 8.8 JXH M zp JXH M zp JXH M zp JXH M zp JXH M zp JXH M zp Hot-dip galvanised (hdg), Grade 8.8 JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg JXH M hdg Stainless Steel, Quality FA-70 (1.4462) 1) JXH M FA JXH M FA JXH M FA JXH M FA For profiles: JXA and JXM W 29/20 Thread Length l Pack Qty [Piece] / 100 Piece Zinc-plated (zp), Grade 8.8 JXD M zp JXD M zp JXD M zp Hot-dip galvanised (hdg), Grade 8.8 JXD M hdg JXD M hdg JXD M hdg JXD M hdg JXD M hdg JXD M hdg JXD M hdg JXD M hdg JXD M hdg Stainless Steel, Quality FA-70 (1.4462) 1) JXD M FA JXD M FA JXD M FA ) Description of FA also applies to F4 (1.4462) Ordering Example T-Bolts Thread Length mm JXH M16 x zp 26 JORDAHL List /2016

27 Toothed T-Bolts JZS Double-Notch Toothed T-Bolts JKB l l For profiles: JZA and JZM K 41/22 Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg), Grade 8.8 JZS M hdg JZS M hdg JZS M hdg JZS M hdg JZS M hdg JZS M hdg JZS M hdg Stainless Steel, Quality A4-50 JZS M A JZS M A JZS M A JZS M A JZS M A JZS M A JZS M A For profiles: W 50/30, W 53/34, W 55/42 Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg), Grade 8.8 JKB M hdg JKB M hdg JKB M hdg JKB M hdg JKB M hdg JKB M hdg Double-Notch Toothed T-Bolts JKC 30.1 l Further Information: All T-bolt prices include nuts. Washers are ordered separately. For profile: W 40/22 Thread Length l Pack Qty [Piece] / 100 Piece Hot-dip galvanised (hdg), Grade 8.8 JKC M hdg JKC M hdg JKC M hdg JORDAHL List /

28 FASTENING CONNECTOR MOUNTING JORDAHL Accessories for Channels Hooked-Head Sliding Nuts JGM 1) (Forged) h h h JGM A l b For profile W 72/48 K 72/48 JGM B W 55/42 W 53/34 K 53/34 K 50/40 W 50/30 l b K 50/30 K 48/26 JGM C W 40/22 K 40/25 K 40/22 l b Thread M 6 M 8 M 10 M 12 M 16 M 20 / 100 Piece I b h Pack Qty zp s on application A4 s on application I b h Pack Qty zp A I b h Pack Qty zp A ) JORDAHL sliding nuts JGM for the above profiles are also available on application. Hammer-Head Sliding Nuts JGM (Flat Steel) b JGM H l JGM D JGM G h For profile K 38/17 K 36/36 K 36/20 K 28/15 K 28/28 K 28/12 K 21/12 Thread M 4 M 5 M 6 M 8 M 10 M 12 / 100 Piece I b h Pack Qty zp A I b h Pack Qty zp Pack Qty A I b h Pack Qty zp A Channel Nuts JAM h JAM 22 l b JAM F 22 with spring h l b For profile K 41/41 K 41/41 Thread M 6 M 8 M 10 M 12 / 100 Piece I b h ,5 Pack Qty zp hdg I b h ,5 Pack Qty zp hdg JORDAHL List /2016

29 Notch Toothed Shims JKZS For Bolts / 100 Piece 16 hdg M 16; Hexagon Nuts (DIN EN ISO 4032 (DIN 934)) Thread M 6 M 8 M 10 M 12 M 16 M 20 M 24 / 100 Piece zp hdg A Washers DIN EN ISO 7089 (DIN 125, without Chamfer) 1) Vickers hardness. Internal Diameter / 100 Piece 140 HV 1) 200 HV 1) 8.8 zp hdg A Washers (DIN EN ISO , DIN 9021) Internal Diameter / 100 Piece zp hdg A Spring Washers (DIN 127) A 6 A 8 A 10 A 12 A 16 A 20 A 24 M 6 M 8 M 10 M 12 M 16 M 20 M 24 / 100 Piece zp A Hexagonal Coupling Sleeves s e L Thread Length M M M M / 100 Piece zp A4 s on application JORDAHL List /

30 FASTENING CONNECTOR MOUNTING Coupling Sleeves Round D L Thread Length M 6 20 M 8 20 M M M M / 100 Piece zp A4 s on application Flange Nuts Thread M 12 M 16 / 100 Piece zp Horseshoe Shims JVS 1) Article Depth Width / Piece JVS A JVS A JVS A JVS A JVS A JVS A JVS A JVS A Square Shims JVL 1) Article Depth Width / Piece JVL A JVL A JVL A JVL A JVL A JVL A JVL A JVL A ) Additional sizes can be provided on request End Anchors JE for Anchor Channels JE Corresponding Anchor Channels Pack Qty [Piece] Anchor bolt Thread / Piece zp A4 JE 1 JTA K 28/15 25 M JTA K 38/17 JE 2 JTA W 40/22 JTA K 40/25 25 M Clamping Plates KPA for Crane Rails 2) Other diameters on request KPA 45 KPA 55 KPA 65 KPA 75 / 100 Piece Diameter 2) 18 mm/ 22 mm 22 mm 22 mm 22 mm hdg JORDAHL List /2016

31 Clamping Plates KP DIN 3568 KP 50/7 KP 60/10 KP 60/11 KP 60/12 KP 60/14 KP 60/16 KP 60/18 KP 60/20 / 100 Piece Slot Size LL LL LL 18 x 24 LL LL LL LL LL hdg Clamping Claw SKU with Washer SKUS hdg for clamping range 5 40 mm Set consists of clamping claw SKUS and washer DIN EN ISO for T-bolts M / 100 Piece hdg = hot-dip galvanised Formwork Nail JSN For the attachment of anchor channels to wooden formwork with predetermined breaking point NEW! Shaft Diameter Head Diameter Length / 100 Piece JSN St JSN A on application Channel Brackets JKO Bracket JKO 28/28-1 JKO 36/36-1 JKO 36/36-2 h h L L Profile K 28/28 K 36/36 K 36/36 Matching T-Bolts JD, M 6 M 12 JH, M 10 M 16 JH, M 10 M 16 Vertical Profile for T-bolt U 36/24 M 12 U 45/27 M 12 U 45/27 M 12 Bracket Length L Height h hdg / Piece A4 s on application s on application s on application Ordering Example Channel Brackets JKO Profile Bracket Length L JKO K 28/ hdg JORDAHL List /

32 FASTENING CONNECTOR MOUNTING Edge Protection Angles JKW e I s 92 a R a L 250 n a/s Length Number of Anchors hdg JKW 50/ JKW 50/ JKW 50/ JKW 50/ JKW 50/ JKW 80/ JKW 80/ JKW 80/ JKW 80/ JKW 80/ JKW 100/ JKW 100/ JKW 100/ JKW 100/ JKW 100/ JKW 100/ JKW 100/ JKW 100/ JKW 100/ JKW 100/ / Piece A4/A2 s on application and Design hdg = hot-dip galvanised A4 = stainless steel material /1.4404/ A2 = stainless steel material Ordering Example Edge Protection Angle JKW Length JKW 50/ hdg Turnbuckle Connections JSV ( A4) JSV SP Load Category F Rd [ kn] Sleeve T-bolt Left-hand Thread T-bolt Right-hand Thread / Piece JSV-28-1 SP 10 x 50 JDL-M JD-M JSV-28-2 SP 10 x 80 JDL-M JD-M JSV-38-1 SP 12 x 50 JHL-M JH-M JSV SP 12 x 80 JHL-M JH-M JSV-38-3 SP 12 x 80 JHL-M JH-M JSV-38-4 SP 16 x 50 JHL-M JH-M JSV SP 16 x 80 JHL-M JH-M JSV-38-6 SP 16 x 80 JHL-M JH-M JSV-40-1 SP 16 x 50 JCL-M JC-M JSV SP 16 x 80 JCL-M JC-M JSV-40-3 SP 16 x 80 JCL-M JC-M JSV-50-1 SP 16 x 80 JBL-M JB-M JSV SP 16 x 80 JBL-M JB-M JSV-50-3 SP 16 x 80 JBL-M JB-M JORDAHL List /2016

33 Turnbuckles SP ( A4) (with right/ left thread and hole) SP SP SP SP SP SP / 100 Piece Eyelet Sockets M 8 40 M M M / 100 Piece zp A4 s on application Ring Nuts RM (DIN 582) Thread M 8 M 10 M 12 M 16 M 20 / 100 Piece black gv Threaded Rods GS (Length L = 1000 mm) Thread M 6 M 8 M 10 M 12 M 16 M 20 / 100 Piece zp A Pressure Bolts JDS ( A4) Thread T-bolt Length M 10 M 12 M 16 M 20 / Piece / 240 1) s on application Round plastic sleeve Sleeve length 80 mm ) No standard T-bolt length JORDAHL List /

34 FASTENING CONNECTOR MOUNTING Brick Tie Anchors JMA Series 12 JMA-.../12 1) For profiles: Kt 25/15-D, K 28/15 L 1= 20 Length L 2 L 2 25 / 100 Piece hdg A ) Pack.-unit = 100 pieces Series 18 JMA-.../18 1) For profile: K 38/17 L 1 = 20 Length L 2 L 2 30 / 100 Piece hdg A Thin-Bed Brick Tie Anchors JMA-D Series 12 JMA-...-D/12 1) For profiles: Kt 25/15-D, K 28/15 Length L L 25 / 100 Piece A Brick Tie Anchors JMA-Q and JMA-QE Series 12 JMA Q/12 JMA QE/12 For profiles: Kt 25/15-D, K 28/15 Series 18 JMA Q/18 JMA QE/18 For profile: K 38/17 L 1 = 20 mm L 2 L 1 = 20 mm L 2 L 1 = 20 mm L 2 L 1 = 20 mm L 2 L 3 L 3 L 3 L Length L 2 Length L 3 / 100 Piece hdg A Ordering Example Brick Tie Anchors Length L 2 L 3 Series JMA QE / 12 hdg Length L 2 Length L 3 / 100 Piece hdg A Ordering Example Brick Tie Anchors Length Series JMA A4 34 JORDAHL List /2016

35 Nail Anchors JNA Series 12 JNA-.../12 1) For profiles: Kt 25/15-D, K 28/15 Series 18 JNA-.../18 1) For profile: K 38/17 Sliding Sleeves JMA-G JMA-G 150 / 12 For profile: JMA 120/12 Length L L 35 / 100 Piece hdg ) Pack Qty = 100 Piece Length L L 35 / 100 Piece hdg / 100 Piece Channels for Brick Ties Kt 25/15-D 2) Brick Tie Anchor: Series 12 Weight: 0.34 kg/m JTA K 28/15 3) Brick Tie Anchor: Series 12 Weight: 1.15 kg/m JTA K 38/17 3) Brick Tie Anchor: Series 18 Weight: 1.95 kg/m Anchor [Piece/m] / m sv A4 6/m ) Pack.-unit 1 bundle = 100 pieces stock length = 2500 and 5000 mm (- 0/+ 50 mm) no cut length 3) Stock length: see page 11 Anchor [Piece/m] 2, / m hdg A4 5/m Cut Length Surcharge 10 % 10 % Anchor [Piece/m] / m hdg A4 5/m Cut Length Surcharge 10 % 10 % Further Information: All prices incl. foam filling and nail holes Cut length: 1050 mm < L < 6000 mm K 38/17 also with anchor height h ca. 30 mm, without official approval (price on application) Weight per metre based on mill finish (for galvanised profiles: weight per metre + 10 %; for stainless steel profiles: weight per metre + 2 %) and Design K = cold-formed hdg = hot-dip galvanised sv = pre-galvanised A2 = stainless steel / A4 = stainless steel /1.4404/ JORDAHL List /

36 FASTENING CONNECTOR MOUNTING NEW! Toothed Straps JVB-N 1) (for longitudinal tension loads) JVB-N N Rd [kn] Dimension e / Piece Zinc Electroplated Steel Lean Duplex (L4) (ZP) X-plate JVB-N-2815-e N Ed JVB-N-3817-e e JVB-N-5030-e ) incl. X-plate NEW! Toothed Straps JVB-V 2) (for transverse shear loads) JVB-V V Rd [kn] Length l / Piece Zinc Electroplated Steel Lean Duplex (L4) (ZP) V Ed adjustable eccentric inserts JVB-V JVB-V l JVB-V ) incl. 2x adjustable eccentric inserts Toothed Straps JVB-Z 3) (for longitudinal tension loads) JVB-ZS L LL Toothed plate Series 12 For profile K 28/15 18 For profile K 38/17 Load Category F Rd [kn] JVB-L-ZS/Series Slot Size / 100 Pieces zp A4 JVB- 90-Z/12 LL JVB-115-Z/12 LL JVB-140-Z/12 LL JVB-165-Z/12 LL JVB-190-Z/12 LL JVB-215-Z/12 LL JVB-240-Z/12 LL JVB-115-Z/18 LL JVB-140-Z/18 LL JVB-165-Z/18 LL JVB-190-Z/18 LL JVB-215-Z/18 LL JVB-240-Z/18 LL ) incl. toothed plate mm 36 JORDAHL List /2016

37 Toothed Straps JVB-ZS 1) (for longitudinal tension and compression loads) JVB-FTQ L LL Toothed plate Series 12 For profile K 28/15 18 For profile K 38/17 Load Category F Rd [kn] JVB-FTQ/Series Slot Size / 100 Pieces hdg JVB-115-ZS/12 LL JVB-140-ZS/12 LL JVB-165-ZS/12 LL JVB-190-ZS/12 LL JVB-215-ZS/12 LL JVB-140-ZS/18 LL JVB-165-ZS/18 LL JVB-190-ZS/18 LL JVB-215-ZS/18 LL A4 1) incl. toothed plate mm and Design hdg = hot-dip galvanised zp = zinc-plated A4 = Stainless Steel Scaffold Shoes JG 2) (-tested) JG-K 4 JG-K 9 JG-K 12 Colour Yellow Blue Red Hole Frame Shoe / Piece JG-H 2.5 JG-H 5 1) JG-H 9 1) JG-L 2.5 Colour Grey Blue Blue Grey Frame Shoe / Piece GHK 25 GHK 30 GHS 30 GHK 25 Associated Sleeve Sleeve Dimension PE PE hdg PE Frame Sleeve / Piece ) Frame shoes for square timber widths: 10 cm (12 cm on request) and Design Frame Shoe steel colour coated Sleeve St steel Sleeve PE plastic Ordering Example Scaffold Shoes JG JG-K 4 JORDAHL List /

38 FASTENING CONNECTOR MOUNTING JORDAHL Punching Shear Reinforcement Punching Shear Reinforcement JDA, Standard Configurations ETA (European Technical Approval ETA-13/0136) abz (German Technical Approval Z ) Shear Reinforcement JDA-S, Standard Configurations 1) abz (German Technical Approval Z ) Two Anchor System l L h A Bars of structural steel Double-headed anchors in ribbed and smooth reinforcement steel Ordering Example Punching Shear Reinforcement No. of Anchors Anchor d A d A Anchor Length h A Strip Length l L JDA 2 / 14 / ) JDA-S (shear application) and JDA (punching shear application) systems use the same component configurations Further Information: See page 41 for matching accessories Diameter Anchor d A Anchor Length h A / Piece JORDAHL List /2016

39 Punching Shear Reinforcement JDA, Standard Configurations ETA (European Technical Approval ETA-13/0136) abz (German Technical Approval Z ) Shear Reinforcement JDA-S, Standard Configurations 1) abz (German Technical Approval Z ) Three Anchor System Bars of structural steel Double-headed anchors in ribbed and smooth reinforcement steel Ordering Example Punching Shear Reinforcement No. of Anchors h A Anchor d A Anchor Length h A Strip Length l L JDA 3 / 14 / ) JDA-S (shear application) and JDA (punching shear application) systems use the same component configurations Further Information: See page 41 for matching accessories Other lengths on request l L d A Diameter Anchor d A Anchor Length h A / Piece JORDAHL List /

40 FASTENING CONNECTOR MOUNTING Punching Shear Reinforcement JDA, Long Lengths ETA (European Technical Approval ETA-13/0136) abz (German Technical Approval Z ) Shear Reinforcement JDA-S, Long Lengths 1) abz (German Technical Approval Z ) Systems with 5 or more anchors Bars of structural steel Double-headed anchors in ribbed and smooth reinforcement steel l L d A Ordering Example Punching Shear Reinforcement h A No. of Anchors Anchor d A Anchor Length h A Strip Length l L JDA n / 14 / 225 XXX 1) JDA-S (shear application) and JDA (punching shear application) systems use the same component configurations Calculation for Multi-anchors: = JDA with 2 Anchors Factor Anchor Number Factor Further Information: See page 41 for matching accessories Punching Shear Reinforcement JDA-FT-KL ETA (European Technical Approval ETA-13/0136) abz (German Technical Approval Z ) d A Anchor Length h A Diameter Anchor d A / Piece h A , In steps of 10 mm s on application Bars of structural steel Double-headed anchors in ribbed and smooth reinforcement steel Patented plastic fastener Anchor with preassembled clip Ordering Example Punching Shear Reinforcement No. of Anchors Anchor d A Anchor Length h A Strip Length l L JDA-FT-KL n / 14 / 225 XXX 40 JORDAHL List /2016

41 JORDAHL Accessories for Punching Shear Reinforcement Spacers AH-FBA Size / Piece For pre-cast concrete use AH-FBA 20 Fibre reinforced concrete 0.25 AH-FBA 25 Fibre reinforced concrete 0.25 AH-FBA 30 Fibre reinforced concrete 0.25 Spacers AH-FT Size / Piece For pre-cast concrete use AH-FT 15 Plastic 0.20 AH-FT 20 Plastic 0.20 AH-FT 25 Plastic 0.20 AH-FT 30 Plastic 0.20 Spacers AH-DA Size / Piece For in-situ concrete use AH-DA 15/20 Plastic 0.20 AH-DA 25 Plastic 0.20 AH-DA 30 Plastic 0.20 AH-DA 35 Plastic 0.20 Assembly Aids JDA-Q / Piece 1.05 JORDAHL List /

42 FASTENING CONNECTOR MOUNTING JORDAHL Double Shear Connectors abz (German Technical Approval Z ) Double Shear Connectors JDSD Double Shear Connectors JDSDQ Socket (Sliding Tube) Socket (rectangular sliding tube) Dowel Dowel / Piece Socket (Sliding Tube) Dowel + Socket JDSD 20 HF JDSD 25 HF JDSD 30 HF JDSD 45 HF JDSD 60 HF JDSD 90 HF JDSD 120 HF JDSD JDSD JDSD JDSD Dowel Dowel / Piece Socket (rectangular tube) Dowel + Socket JDSDQ 25 HF JDSDQ 30 HF JDSDQ 45 HF JDSDQ 60 HF JDSDQ 90 HF JDSDQ 120 HF JDSDQ JDSDQ JDSDQ JDSDQ Ordering Example Double Shear Connectors JDSD 60 HF Complete (dowel and socket) Ordering Example Double Shear Connectors JDSDQ 60 HF Complete (dowel and socket) Size Size JDSD 60 HF JDSDQ 60 HF Further Information: See page 43 for matching accessories and Design A4 = Stainless Steel /1.4404/ JORDAHL List /2016

43 JORDAHL Accessories for Double Shear Connectors Fire-Protection Collars JBRM Fire-Protection Collars JBRMQ / Piece Joint width 20 mm 30 mm JBRM JBRM JBRM JBRM JBRM JBRM JBRM JBRM JBRM JBRM JBRM / Piece Joint width 20 mm 30 mm JBRMQ JBRMQ JBRMQ JBRMQ JBRMQ JBRMQ JBRMQ JBRMQ JBRMQ JBRMQ Ordering Example Fire-Protection Collars for 20 mm building joint using Double Shear Connectors JDSD 60 HF Fire-Protection Collar Size of Dowel Joint width JBRM Ordering Example Fire-Protection Collars for 20 mm building joint using Double Shear Connectors JDSDQ 60 HF Fire-Protection Collar Size of Dowel Joint width JBRMQ JORDAHL List /

44 FASTENING CONNECTOR MOUNTING JORDAHL Brickwork Support Systems Brickwork Support Brackets abz (German Technical Approval Z ) Approval (TP ) Valid for all Products with Bracket Head and Bracket Body System consists of: JORDAHL brickwork support bracket Oblique wedge adjuster, see p. 52 Clamping washer, see p. 52 Stainless steel corrosion resistance class III Brickwork Support Brackets JVAeco+ N, JVAeco+ NA, JVAeco+ NU JVAeco+ N JVAeco+ NA JVAeco+ NU Offset Height A for Example 100 mm Ordering Example Support Brackets JVAeco+ NA Projection 230 mm, load category 3.5; offset 100 mm Projection L Load Category Offset A JVAeco+ 230 NA / 3.5 A = 100 Load Category Projection L / Piece s on application Intermediate and special sizes available on request. Brickwork Support Brackets JVA+ N, JVA+ NA, JVA+ NU JVA+ N JVA+ NA JVA+ NU Offset Height A for Example 100 mm Ordering Example Support Brackets JVA+ NA Projection 150 mm, load category 3.5; offset 100 mm Projection L Load Category Offset A JVA+ 150 NA / 3.5 A = 100 Load Category Projection L / Piece s on application Intermediate and special sizes available on request. Further Information: See pages for matching accessories 44 JORDAHL List /2016

45 Brickwork Support Brackets JVAeco+ P, JVAeco+ PAR JVAeco+ P JVAeco+ PAR Offset Height A for Example 100 mm Ordering Example Support Brackets JVAeco+ PAR Projection 230 mm, load category 3.5; offset 100 mm Projection L Load Category Offset A JVAeco+ 230 PAR / 3.5 A = 100 Load Category Projection L Intermediate and special sizes available on request. / Piece s on application Brickwork Support Brackets JVA+ P, JVA+ PAR JVA+ P JVA+ PAR Offset Height A for Example 100 mm Ordering Example Support Brackets JVA + PAR Projection 150 mm, load category 3.5; offset 100 mm Projection L Load Category Offset A JVA+ 150 PAR / 3.5 A = 100 Load Category Projection L / Piece s on application Intermediate and special sizes available on request. Brickwork Support Brackets JVA+ E, JVA+ EA JVA+ E JVA+ EA Offset Height A for Example 100 mm Ordering Example Support Brackets JVA+ EA Projection 150 mm, load category 3.5; offset 100 mm Projection L Load Category Offset A JVA+ 150 EA / 3.5 A = 100 Load Category Projection L / Piece s on application Intermediate and special sizes available on request. Further Information: See pages for matching accessories JORDAHL List /

46 FASTENING CONNECTOR MOUNTING Brickwork Support Brackets JVAeco+ F, JVAeco+ FAR JVAeco+ F JVAeco+ FAR Ordering Example Brickwork Support Brackets JVAeco+ F Projection 230 mm, load category 7.0; angle length 1250 mm, selected support bracket (L ) Load Category Projection L Offset Height A for Example 100 mm Length / Piece s on application Projection L Length Load L W Category Angle Dimensions JVAeco F / 7.0 ( L ) Brickwork Support Brackets JVA+ F, JVA+ FAR JVA+ F JVA+ FAR Ordering Example Brickwork Support Brackets JVA+ F Projection 190 mm, load category 7.0; angle length 1250 mm, selected support bracket (L ) Offset Height A for Example 100 mm Projection L Length Load L W Category Angle Dimensions JVA F / 7.0 ( L ) Load Category Projection L Length / Piece s on application Brickwork Support Brackets JVAeco+ NFT, JVAeco+ NAFT JVAeco+ NFT JVAeco+ NAFT Offset Height A for Example 100 mm Ordering Example Brickwork Support Brackets JVAeco+ NAFT Projection 230 mm, load category 7.0; offset 100 mm Projection L Load Category Offset A JVAeco+ 230 NAFT / 7.0 A = 100 Load Category Projection L / Piece s on application Intermediate and special sizes available on request. Further Information: See pages for suitable accessories 46 JORDAHL List /2016

47 Brickwork Support Brackets JVA+ NFT, JVA+ NAFT JVA+ NFT JVA+ NAFT Offset Height A for Example 100 mm Ordering Example Brickwork Support Brackets JVA+ NAFT Projection 190 mm, load category 7.0; offset 100 mm Projection L Load Category Offset A JVA+ 190 NAFT / 7.0 A = 100 Load Category Projection L / Piece s on application Intermediate and special sizes available on request. Angled Support Brackets L-DF+, L-DN+ and L-F+ L-DF+ / L-DN+ 1) L-F+ Load Categ. Projection L / Piece L W = 500 mm L W = 750 mm L W = 1000 mm s on application 1) L-DN+ not shown Intermediate and special sizes available on request. Load Categ. Projection L / Piece L W = 500 mm L W = 750 mm L W = 1000 mm s on application Ordering Example Angled Support Bracket L-DF+ Projection = 190 mm, load category 3.2; angle length = 1000 mm Projection L Length L W Load Category L-DF / 3.2 Further Information: See pages for suitable accessories Stainless steel corrosion resistance class III JORDAHL List /

48 FASTENING CONNECTOR MOUNTING Restoration Brackets JMK-S+ Size / Piece To suit project requirements Stainless steel corrosion resistance class III Other materials provided upon request s on application Grout-in Brackets JMK+ JMK+ N / JMK+ NA 1) JMK+ E / JMK+ EA 1) JMK+ P / JMK+ PAR 1) Projection L = Load Category / Piece JMK+ N JMK+ NA 1) JMK+ E JMK+ EA 1) JMK+ P JMK+ PAR 1) s on application s on application s on application 1) Offset height not shown. The corresponding angle can be found on page 50. Other designs are available on request. Ordering Example Grout-in Brackets JMK+ E Shell space a = 50 mm, load category 3.5 kn Projection L Load Category JMK+ 140 E / 3.5 Stainless steel corrosion resistance class III Intermediate and special sizes available on request. Adjustment Foot Additional Components Depth Load Category / Piece s on application JVA+ZB Wall Thickness Load Category / Piece s on application Further Information: See pages for matching accessories 48 JORDAHL List /2016

49 Parapet Brick Anchors JAV Length / Piece s on application Ordering Example Attic Brick Anchors JAV Projection Length JAV 75 / 600 Special sizes available on request. Windposts JWP L Profile Section 1) w x d x t / Piece s on application 1) For brickwork thickness of 115 mm; other profiles available on request Ordering Example for Windposts JWP Section Length JWP Stainless steel corrosion resistance class III Further Information: See pages for matching accessories JORDAHL List /

50 FASTENING CONNECTOR MOUNTING JORDAHL Accessories for Brickwork Support Angled Brackets JW Angle Section H W B W S W Length / Piece s on application Ordering Example Angled Brackets JW Length Section H W B W S W JW Different lengths and angle measurements available on request. Suspension Loops JRH JRH 0 JRH 1-7 Suspension Loops JRH (for Stretcher Lintel) JRH 20 JRH B S H W B W S W B H W B W B W H W 51 for Angle Sections H W B W S W JRH 0/11.5 for JVAeco+ and JVA+ N, NA, NU JRH 1/ JRH 2/ JRH 3/ JRH 4/ JRH 5/ JRH 6/ JRH 7/ / Piece s on application for Angle Sections H W B W S W JRH 20/11.5 for JVAeco+ and JVA+ N, NA, NU JRH 21/ JRH 22/ JRH 23/ JRH 24/ JRH 25/ JRH 26/ JRH 27/ / Piece s on application Stainless Steel Wires ESD Ordering Example Suspension Loops JRH Other designs are available on request. Length ESD / m s on application Thickness JRH 5 / 11.5 Precast Lintel Support JFT+ Ordering Example Precast Lintel Support JFT+ for load category 3.5 Profile type JFT 1+ K28/15 Load Category / Piece 3.5 JFT 1+ (K28/15) s on 7.0 JFT 2+ (K38/17) application 10.5 JFT 3+ (K38/17) 1) Special forms are available on request. Stainless steel corrosion resistance class III 1) Additional reinforcement according to approval Z JORDAHL List /2016

51 Threaded Loops JGS Lintel Support Bracket JAW Load Category / Piece 3.5 JGS M 8 s on 7.0 JGS M 8 application 10.5 JGS M 10 Load Category / Piece 2.6 JAW-2,6 3.5 JAW-3,5 s on 4.2 JAW-4,2 application 5.5 JAW-5,5 7.0 JAW-7,0 Tilt Protection JVB-K Tilt Protection JVB-K+ NEW! JVB-K3 JVB-K4 JVB-K5 JVB-K6 JVB-K8 Length l any length s on application JVB-K3+ JVB-K4+ JVB-K5+ JVB-K6+ JVB-K8+ Length l any length s on application Ordering Example Tilt Protection JVB-K Length JVB-K3 / 112 Scaffold Anchors JGA +Q, +Z (with Inner Thread, incl. Plastic Cap) JGA +Q JGA +Z / Piece 1) JGA + Q s on application / Piece 2) JGA + Z s on application Ring Bolts FIG Ordering Example Scaffold Anchors JGA + Z Facade depth: 85 mm cavity mm thick brick = 200 mm FIG M zp 1) Incl. grey plastic cap 2 ) Incl. dowel and grey plastic cap / Piece s on application Length L JGA + Q 190 Intermediate and special sizes available on request. and Design Stainless steel corrosion resistance class III JORDAHL List /

52 FASTENING CONNECTOR MOUNTING Installation Set (Brickwork Support Brackets to Anchor Channels) 1) Suitable for Channel Bracket / 100 Piece JH M T A4-Set JTA K 38/ JB M T A4 70-Set JTA K 50/ s on application JB M T A4-Set JTA K 53/ ) Set consists T-bolt, nut, wedge adjuster, U-plate More hammer-head and hook-head T-bolts can be found on pages Shim AGW Shim Thickness Wedge Adjuster, U-Plate Wedge Adjuster U-Plate Cavity Wall Ties JLA Suitable for Load Category 3.5/7.0/ / / Piece s on application / Piece s on application Installation Set (Drilled Bolts for Brickwork Support Brackets) Anchor bolt M 10/10 A4 Anchor bolt M 12/10 A4 Anchor bolt M 12/50 A4-Set 2) Anchor bolt M 12/60 A4-Set 2) Anchor bolt M 16/100 A4-Set 2) Stud anchor M 12 75/60 A4-Set 3) Stud anchor M /60 A4-Set 3) Stud anchor M 16 95/60 A4-Set 3) Stud anchor M /60 A4-Set 3) Cleaning brush BS 12 4) Cleaning brush BS 14 5) Cleaning brush BS 16/18 6) Relief valve Brickwork supp. bracket load category / Piece P.O.A. 2 ) Set incl. wedge adjuster and clamping plate 3) Set incl. injection mortar cartridge, perforated plate and clamping plate; injection mortar cartridge and cartridge applicator gun available on request 4) For stud anchors M 12; 5) For stud anchors M 12 6) For stud anchors M 16 Cavity Wall Ties JLA W-L Diameter/ Length 7) Dowel Anchor JLA D-ZV L L W L D ZV 4/225, 250, 275, 300, 340, 400 4/180, 210, 250, 275, 300, 320, 350, 375, 400 s on application 7) Sold only in complete pack.-unit. 1 pack.-unit = 250 items. Other types available on request Ordering Example Cavity Wall Ties L-form Diameter/Length L JLA W L 4/250 Insulation Retainer, Water Barrier Discs, ISO-Clips Insulation Retainer Water Barrier Disc ISO-Clip / 100 Piece s on application 52 JORDAHL List /2016

53 JORDAHL Support Corbels Support Corbels JBA NJ, AJ, N, A Approval (TP S-WUE/130261) NEW! Variants JBA NJ: Standard, height adjustable JBA AJ: Reversed, height adjustable JBA N: Standard JBA A: Reversed JBA 1 JBA 2 JBA 3 JBA 4 JBA 5 JBA 6 JBA 7 JBA Length s on application Installation Set for JBA NJ and AJ (height adjustable) JBA-SetJ-1 JBA-SetJ-2 JBA-SetJ-3 JBA-SetJ-4 JBA-SetJ-5/6 JBA-SetJ-7/8 JBA 1 JBA 2 JBA 3 JBA 4 JBA 5 JBA 6 JBA 7 JBA 8 X-Plate JXS-D13 JXS-D17 JXS-D21 Horseshoe Shim JVS-40/3-13 JVS-65/4-17 JVS-80/8-21 Square Shim JVL-40/3-8 JVL-65/4-8 JVL-80/8-8 Levelling Pin JGW M16x50 JGW M16x50 JGW M20x55 JGW M24x60 JGW M27x70 JGW M30x80 s on application s on application Installation Set for JBA N and A JBA-Set-1 JBA-Set-2/3/4 JBA-Set-5/6/7/8 JBA 1 JBA 2 JBA 3 JBA 4 JBA 5 JBA 6 JBA 7 JBA 8 X-Plate JXS-D13 JXS-D17 JXS-D21 Horseshoe Shim JVS-40/3-13 JVS-65/4-17 JVS-80/8-21 P.O.A. s on application s on application Ordering Example Profile- Size Length L Distance e JBA-NJ Stainless steel corrosion resistance class III Reinforcement steel B500B JORDAHL List /

54 FASTENING CONNECTOR MOUNTING JORDAHL Mounting Channels Mounting Channels JM W Profile / m Cutting Rate / Piece 5 JM W 72/ T-bolt: JA M 20 M 30 Weight: 8.85 kg/m black hdg A JM W 55/ T-bolt: JB M 10 M 24 Weight: 6.57 kg/m black hdg JM W 53/ T-bolt: JB M 10 M 20 Weight: 4.96 kg/m black hdg A JM W 50/30 T-bolt: JB M 10 M 20 Weight: 3.25 kg/m black hdg A JM W 40/22 T-bolt: JC M 10 M 16 Weight: 2.12 kg/m black hdg A Toothed Mounting Channels JXM W Profile / m Cutting Rate / Piece JXM W 64/44 T-bolt: JXE M 20 M 24 Weight: 7.19 kg/m black hdg JXM W 53/34 T-bolt: JXB M 16 M 20 Weight: 4.65 kg/m black hdg A JXM W 38/23 T-bolt: JXH M 12 M 16 JH M 10 M 16 Weight: 2.42 kg/m black hdg A JXM W 29/20 T-bolt: JXD M 12 JD M 6 M 12 Weight: 1.55 kg/m black hdg Further Information: See pages for matching T-bolts and accessories Normally supplied in 6 m lengths. See page 18 for information about prices and cut lengths 54 JORDAHL List /2016

55 Mounting Channels JM K Profile / m Cutting Rate / Piece 8 JM K 72/ T-bolt: JA M 20 M 30 Weight: 8.09 kg/m JM K 53/34 T-bolt: JB M 10 M 20 Weight: 4.47 kg/m JM K 50/40 1) black hdg A black hdg A T-bolt: JB M 10 M 20 Weight: 3.41 kg/m black hdg JM K 50/30 T-bolt: JB M 10 M 20 Weight: 3.04 kg/m black hdg A JM K 48/26 1) T-bolt: JB M 10 M 16 Weight: 2.25 kg/m black hdg JM K 41/41 1) Channel Nuts: JAM (F) 22 M 6 M 12 Weight: 2.61 kg/m black hdg JM K 40/25 T-bolt: JC M 10 M 16 Weight: 2.01 kg/m black hdg A A JM K 40/22 T-bolt: JC M 10 M 16 Weight: 1.53 kg/m black hdg JM K 38/17 T-bolt: JH M 10 M 16. Weight: 1.77 kg/m black hdg A A ) Available in 6000 mm only Ordering Example Mounting Channel JM Profile Size Channel Length JM W 50/ hdg Further Information: See pages for matching T-bolts and accessories and Design black = mill finish / hdg = hot-dip galvanised / A2 = stainless steel / A4 = stainless steel /1.4404/ W = hot-rolled K = cold-formed JORDAHL List /

56 FASTENING CONNECTOR MOUNTING Mounting Channels JM K Profile / m Cutting Rate / Piece 36 JM K 36/36 1) T-bolt: JH M 10 M 16. Weight: 2.20 kg/m black hdg A JM K 36/20 1) T-bolt: JH M 10 M 16. Weight: 1.44 kg/m black 6.95 hdg JM K 28/28 1) T-bolt: JD M 6 M 12 Weight: 1.39 kg/m JM K 28/15 T-bolt: JD M 6 M 12 Weight: 1.08 kg/m JM K 28/12 T-bolt: JD M 6 M 10 Weight: 0.89 kg/m black 6.60 hdg A black hdg A A black hdg A A ) Available in 6000 mm only Toothed Mounting Channels JZM K Profile / m Cutting Rate / Piece JZM K 41/22 T-bolt: JZS M 10 M 16 Weight: 1.88 kg/m black hdg A Further Information: See pages for matching T-bolts and accessories Stock length = 6000 mm (- 0/+ 50 mm) Cut length: L < 6000 mm Short Pieces < 1000 mm on request Cut ends have burrs The stated weight per metre is for mill finish material (for galvanised profiles: weight per metre + 10 %; for stainless steel profiles: weight per metre + 2 %) See page 18 for information about prices and cut lengths 56 JORDAHL List /2016

57 Slotted Back Mounting Channels JML K Profile / m Cutting Rate / Piece JML K 50/40 1) T-bolt: JB M 10 M 20 Weight: 3.25 kg/m LL mm black hdg JML K 41/41 1) Channel Nuts: JAM (F) 22 M 6 M 12 Weight: 2.47 kg/m LL mm JML K 40/25 T-bolt: JC M 10 M 16 Weight: 1.86 kg/m LL mm JML K 38/17 T-bolt: JH M 10 M 16 Weight: 1.55 kg/m LL mm black hdg black hdg A hdg JML K 36/36 1) T-bolt: JH M 10 M 16 Weight: 2.09 kg/m LL mm JML K 28/28 1) T-bolt: JD M 6 M 12 Weight: 1.28 kg/m LL mm JML K 28/15 T-bolt: JD M 6 M 12 Weight: 1.02 kg/m LL 9 25 mm black hdg A black 7.55 hdg A black hdg A ) Available in 6000 mm only LL = Slot Size and Design black = mill finish version / hdg = hot-dip galvanised / A2 = stainless steel / A4 = stainless steel /1.4404/ W = hot-rolled K = cold-formed Slotted holes are at 60 mm centres (other slot variations available on request) Ordering Example Slotted Back Mounting Channels JML Profile Size Channel Length JML K 40/ hdg Further Information: See pages for matching T-bolts and accessories See page 18 for information about prices and cut lengths JORDAHL List /

58 FASTENING CONNECTOR MOUNTING Toothed Slotted Back Mounting Channels JZML K 7.5 LL = Slot Size JZML K 41/22 / m T-bolt: JZS M 12 M 16 Weight: 1.74 kg/m LL mm Cutting Rate / Piece black hdg A and Design black = mill finish version / hdg = hot-dip galvanised / A4 = stainless steel /1.4404/ K = cold-formed Further Information: See page 27 for matching T-bolts and accessories See page 18 for information about prices and cut lengths Slotted holes are at 60 mm centres (other slot variations available on request) Ordering Example Toothed Slotted Back Mounting Channels JZML Profile Size Channel Length JZML K 40/ hdg Curved Mounting Channels JM, JXM and JML Profile JM, JML R i W 72/48 K 72/48 hdg, A4 hdg, A4 max./min. L [m] W 55/42 W 53/34 hdg hdg, A4 K 53/34 hdg, A4 W 50/30 hdg, A4 K 50/30 W 40/22 hdg, A4 hdg, A4 s on application max./m. L [m] K 40/25 K 38/17 hdg, A4 hdg, A4, A2 R a K 28/15 Profile JXM hdg, A4, A2 W 38/23 hdg, A4 W 29/20 hdg R i = internal profile slot; R a = external profile slot and Design hdg = hot-dip galvanised A4 = stainless steel /1.4404/ A2 = stainless steel Ordering Example Curved Mounting Channels Profile Length L [m] Bending Radius [m] JM K 38/ hdg R i = 1.00 Further Information: See pages for matching T-bolts and accessories 58 JORDAHL List /2016

59 Notes JORDAHL GmbH Nobelstr Berlin Tel Fax JORDAHL List /

60 FASTENING CONNECTOR MOUNTING Terms of Delivery and Payment The latest version of the general terms and conditions is always valid. The following terms of delivery and payment are an integral part of all delivery contracts of JORDAHL GmbH (Vendor). The terms extend to all following transactions even if no express inclusion is agreed. Terms and conditions of the purchaser or a third party are not applicable, even if the Vendor does not expressly contradict their validity in individual cases. If the Vendor makes reference to a letter containing or referring to terms and conditions of the purchaser or a third party, this does not suggest any agreement to the validity of such terms and conditions. 1 Subject matter of the contract a ) The offers, plans, drawings and sketches of the Vendor are subject to change. The legal relationship between the Vendor and purchaser are solely governed by the purchase contract concluded in writing, and these terms of delivery and payment. These fully represent all agreements between the contracting partners on the subject matter of the contract. Verbal confirmations by the Vendor before concluding this contract are legally non-binding, and verbal agreements by the contracting parties are replaced by the written contract unless it is expressly stated therein that they will continue to be binding in each case. b ) Errors in offers and invoices etc. especially written errors do not bind the Vendor and do not oblige them to give compensation. Liability for intent and gross negligence remains unaffected by this. c ) Offers, plans, drawings and samples, and other copyrighted presentations may not be made accessible to third parties. The Vendor retains all property rights and copyrights. 2 s and terms of payment a ) s apply ex-works Berlin or delivery warehouse, excluding packaging. The statutory VAT rate shall be applied to these prices. If the agreed prices are below the list prices of the Vendor and delivery will not be made until at least four months after the contract is concluded, the applicable list prices of the Vendor apply (in each case minus an agreed percentage or fixed discount). For invoice amounts below 150, a minimum supplement of 25 is charged. In the case of export deliveries, customs duties, fees, and other public charges may be incurred in addition. b ) The purchase price shall be due for payment within 30 days from the invoice date without discount deduction. If the Vendor accepts cheques, this shall be subject to receipt minus disbursements at the value on the day on which the vendor is able to access the exchange value. For payments by cheque, the retention of title according to 3 shall only expire upon final payment when due. c ) In the event of default, the Vendor is entitled to charge the statutory default interest, but at least 9 % (above the base rate of the European Central Bank) p. a. Evidence of a deviating amount due to damage where the statutory interest is not applicable remains unaffected. If the purchaser is in default of payment, all claims by the Vendor, even if they are not yet due or deferred, shall become due immediately. This also applies in the event of cessation of payments or on submission of an application for the opening of insolvency proceedings. In the event of a default in payment, the Vendor is entitled to make further deliveries dependent on the settlement of open claims. In the case of default, the rebates and discounts granted are not applicable. d ) If the payment conditions are not complied with, the Vendor can, in addition to all other rights, prohibit the further sale and processing of the goods supplied and cancel the direct debit authorisation according to 3 paragraph e). e ) The Vendor is entitled to collateral of normal type and scope for their receivables even if they are conditional and limited. f ) For sales in foreign currency, the purchaser shall bear the exchange risk from the date of the contract. 3 Retention of title a ) The goods supplied are the property of the Vendor until complete payment of the purchasing price and all other claims, including later claims, which the vendor acquires from the business relationship against the purchaser. b ) The purchaser is only authorised and entitled to process or resell reserved goods over the course of a proper business transaction, and under the condition that the regulations according to paragraphs c ) and d ) are observed. The purchaser shall not be entitled to any other disposals of reserved goods and claims which they have either transferred to the Vendor, or which are still to be transferred. c ) If the purchaser processes the goods supplied into a new item, this shall be done for the Vendor. An acquisition of ownership by the purchaser according to 950 BGB (German Civil Code) is excluded. In the case of processing with other items not belonging to the Vendor, the Vendor acquires joint ownership of the new items as per the value ratio. The new item shall be deemed reserved goods. d ) The purchaser shall hereby assign its claims arising from the resale of the reserved goods to the Vendor to the amount that corresponds to the value of the reserved goods. The value of the goods subject to retention of title in this sense represents the invoice value of the Vendor plus a security premium of 50 %. The same applies for other claims which replace the reserved goods or arise in regard to the reserved goods, e.g. insurance claims or claims in tort in case of loss or destruction. e ) The Vendor authorises the purchaser, under reserve of revocation, to collect claims from reselling. The Vendor shall not make use of their own collection authority as long as the purchaser fulfils their payment obligations. On request, the purchaser shall name the debtors of the assigned claims and notify the Vendor of said assignments. The Vendor is hereby authorised to give the debtors notice of the assignment in the name of the purchaser. f ) If the value of the securities granted to the Vendor exceeds the claims by more than 20 %, then the Vendor shall be obliged to reassign or release securities of a corresponding value at their discretion upon request by the purchaser. g ) The purchaser must immediately inform the Vendor of any enforcement measures and other measures of third parties, which can limit the rights of the Vendor to the reserved goods or to assigned claims, and hand over the documents required for an intervention. In the event or attachment or other confiscations, the purchaser is obliged to inform the enforcement officers of the Vendor s owners and notify the Vendor of this within three days, sending a copy of the attachment record. The purchaser bears the costs for protecting the ownership rights of the Vendor. h ) The regulations of this paragraph shall apply accordingly if the purchaser disposes of the goods instead of selling them within the framework of factory contracts or factory delivery contracts. 4 Delivery periods and delivery dates a ) The delivery periods begin with the date of the confirmation of the order by the Vendor. They apply subject to proper and timely self-delivery and are non-binding. Any regulation to the contrary shall only be deemed valid if the Vendor guarantees written and binding delivery periods. Delivery periods and delivery dates refer to the time of delivery ex-works or ex-warehouse. b ) Delivery periods and delivery dates shall be extended by the period of time by which the purchaser is in default in respect of the Vendor, notwithstanding the rights of the Vendor resulting from the default. c ) Compliance with the delivery periods requires an uninterrupted work process and an unhindered shipment and export access. Events of force majeure for which the Vendor is not responsible, including strikes, traffic, disruptions, shortage or transport, fuel oil, raw and auxiliary materials, disruption in operations of any kind in their own company or companies involved in the performance, as well as obstacles caused by 60 JORDAHL List /2016

61 official decrees making delivery difficult, release the Vendor from their delivery obligation for the duration of these factors without the purchaser being entitled to withdraw from the contract. As far as such events make delivery or service difficult or impossible for the Vendor and the obstruction is not only temporary, the Vendor is entitled to withdraw from the contract. For obstacles of a temporary duration, the delivery or service periods shall be extended or the delivery or service deadlines are postponed by the period of obstruction plus an appropriate lead time. d ) If the Vendor falls into default, the purchaser can withdraw from the contract once a reasonable grace period set by the Vendor has expired providing that the goods have not been notified by the Vendor as ready for dispatch upon expiry of the period. 5 Dispatch and transfer of risk a ) Goods notified as ready for dispatch must be called off without delay. b ) The goods shall be dispatched carriage unpaid ex-works Berlin or ex-warehouse unless otherwise arranged. Packaging costs are charged. Dispatch by mail shall be executed solely as a package or carriage paid mail item and postage costs shall be charged to the purchaser. c ) Upon handover of goods to the shipper or freight carrier, at the latest upon departure from the factory or warehouse, the risk is transferred to the purchaser. d ) If the dispatch or the handover is delayed as a result of circumstances for which the purchaser is responsible, then the risk transfers to the purchaser from the day on which the delivery item is ready for dispatch and the Vendor has notified the purchaser of this. e ) Storage costs after transfer of risk are borne by the purchaser. For storage by the Vendor, the storage costs are 0.25 % of the invoice amount of the delivery items to be stored per full week of storage. The right to claim for or request proof of additional or lower storage costs remains reserved. the protection of their ownership from considerable damage. c ) To the extent that the Vendor is, in principle, liable for compensation under 7 paragraph b), such liability shall be limited to damages which the Vendor has foreseen upon conclusion of the contract as a possible consequence of a contractual infringement or which they should have foreseen by applying due care and attention. Indirect loss and consequential damage due to defaults in the delivered item are also only liable for compensation if such damage can be typically expected and when the delivered item is used in conformity with its intended purpose. d ) In the event of liability for simple negligence, the Vendor s obligation to compensate for property damage and other damages to assets resulting from that are limited to an amount of 20,000,000 damage event (corresponding to the current insurance coverage of product liability insurance or third party insurance), even if this is a case of infringement of obligations essential to the contract. e ) The aforementioned exclusions and limitations of liability apply to the same extent in favour of the affiliates, legal representatives, employees and other vicarious agents of the Vendor. f ) Insofar as the Vendor provides technical information or acts as an advisor and this information or advice is not part of the contractually agreed scope of services owed by them, this is done free of charge and with the exclusion of any liability. g ) The limitations of this 7 do not apply to the Vendor s liability on account of deliberate actions, for guaranteed characteristics, on account of injury to life, limb or health or according to the product liability law. 8 Place of performance, place of jurisdiction and set-off a ) The place of performance and jurisdiction for both contractual parties shall be the head office of JORDAHL GmbH (Berlin) provided that the purchaser is a registered trader. b ) Offsetting against counterclaims by the client is only permitted for claims which are undisputed or legally binding. 6 Defects a ) The warranty period shall be one year. b ) The contractual condition of the goods is defined at the point they leave the factory or warehouse. c ) Defects must be reported in writing to the Vendor without delay with the immediate cessation of any processing, at the latest within five days after receipt of the goods. d ) If goods are defective, the Vendor gives warranty by improving and/or replacing them free of charge at their discretion (supplementary performance). As long as the Vendor fulfils their obligations of supplementary performance, the purchaser does not have the right to demand reduction of the payment or cancellation of the contract provided that the rectification of defects does not fail. 7 Liability for compensation a ) The Vendor s liability for compensation, irrespective of the legal grounds, in particular due to impossibility, default, defective or incorrect deliveries, breach of contract, infringement of duties during contract negotiations and/or tort, insofar as it is at fault in all cases, shall be restricted in accordance with this 7. b ) The Vendor shall not be liable in the event of simple negligence of their affiliates, legal representatives, employees or other vicarious agents insofar as this does not amount to an infringement of essential contractual obligations. Essential contractual obligations include the obligation for the timely delivery and installation of the delivery item, its freedom from defects which limit its operability or fitness for purpose more than only slightly, as well as consulting, protection and due care obligations, which are supposed to enable the contractual use of the delivery item by the purchaser or aim at the protection of life and limb of the employees of the purchaser or 9 Miscellaneous a ) Additional quantities The purchaser is obliged to accept incurred additional quantities of up to 10 % of the individual items at the contract price. b ) Part deliveries The Vendor is entitled to make part deliveries if - the part delivery for the purchaser is applicable within the framework of the contractually intended purpose, - the delivery of the remaining ordered goods is ensured and - the purchaser does not incur any substantial additional expenses or any additional costs (unless the Vendor agrees to accept these costs). c ) Application of German law For all legal relations between the vendor and the purchaser, German law shall apply exclusively. The application of the UN sales law is excluded. d ) Written form There are no verbal collateral agreements. All agreements within the framework of the business relationship can only be agreed in writing. This also applies to the amendment of the written form requirement. e ) Jurisdiction agreement If the purchaser is a trader, a legal entity under public law or public special assets, or if they do not have a place of general jurisdiction in the Federal Republic of Germany, then the place of jurisdiction is Berlin for all and any disputes arising from the business relationship between the Vendor and the purchaser. Any mandatory provisions of applicable law providing for exclusive jurisdiction shall remain unaffected by this regulation. JORDAHL GmbH, August 2015 JORDAHL List /

62 FASTENING CONNECTOR MOUNTING Additional Ordering Information All deliveries are made solely in accordance with the Terms of Delivery and Payment dated August 2015 (see pages 60 61). s The list prices are ex works, excluding packaging, plus the applicable statutory rate of VAT. Surcharges for Small Quantities For consignments with a value of less than 150, we charge a small quantities surcharge of 25,. For incomplete pack.-units we charge a handling fee of 20 % of net value. Surcharges In addition, the list prices are subject to the alloy surcharges, steel surcharges and other surcharges applicable on the date of delivery. Return of Goods Goods may only be returned by agreement and in resaleable condition. A re-stocking fee of 15 % of net value will be invoiced. Standard Freight Charges for Deliveries within Germany Delivery of all JORDAHL products with a net value starting from 2000, are carriage free. Parcel service (max. 30 kg): 12, Shipping items: 90, ( 1000, net contract value) Shipping items : 50, ( 1000, up to 2000, net contract value) Fixed-date/express shipments: priced on a time and materials basis Long and oversized shipments: priced on a time and materials basis Note When using our materials, please observe the installation instructions or the relevant notes on how to use them in our catalogues. 62 JORDAHL liste List /2016

63 Service Technical Advice In addition to the technical information in our brochures and on our website, our engineers will make static calculations and provide technical advice on request. Design Software Easy-to-use design software is available to help identify the best products for individual installation situations. This software is available free-of-charge at Download. Installation Instructions / Videos In order to achieve optimum results from the use of JORDAHL products, various installation instructions and videos are available at Download. Tender Texts For all JORDAHL product ranges complete tender texts are available. These contain all of the relevant technical information with regard to material, bearing capacity and sizes together with notes on installation. The data can be exported, e. g. in GAEB-format, and sent as an attachment or stored as a data file. BIM Objects The BIM (Building Information Modelling) method allows all parties involved in a design to work on the same 3D model. Making project management simpler, more economical and more reliable. Products must first be available as smart BIM Objects, containing product information and relations. The first JORDAHL products are now available as BIM Objects and can be downloaded for free at: Download CAD & BIM library. JORDAHL Information Information at Queries/ orders on +49 (0) or info@jordahl.de JORDAHL List /

64 Advice The JORDAHL Experts You are always well advised when you choose JORDAHL products. Whether from the point of view of engineering calculations, general technical advice/service or the development of customised solutions the product specialists at our Development and Service Centre in Berlin always set a high standard. Our professional and experienced employees are always up-to-date with the latest developments and can offer you state-of-the-art, flexible and customised solutions for all your needs. To contact a JORDAHL expert, simply send an to experten@jordahl.de or call +49 (0) Throughout Germany With sites throughout Germany, we are never far away. If you are interested in our products, simply get in touch with our sales company: J&P-Bautechnik Vertriebs GmbH To find a contact person in your area, go to Throughout Europe and around the World Our products are used in construction projects globally because of their acknowledged high quality. You can purchase JORDAHL products from JORDAHL subsidiary companies and distributors located around the world. For specific questions regarding JORDAHL products, inquiries and orders you will find all the contact information at Contact JORDAHL International. JORDAHL List /