FischerPANEEL. * An enterprise of Tata Steel

Size: px

Start display at page:

Download "FischerPANEEL. * An enterprise of Tata Steel"

Bertram Booth
6 years ago
Views:

1 FischerPANEEL * An enterprise of Tata Steel

FischerPANEEL Economical with versatile design possibilities FischerPANEELE are functional building elements for industrial, office and administrative construction.

Mineral fibre boards - non-flammable as per DIN 4 - are mainly employed as thermal insulation.

They can be arranged both vertically and horizontally. The ready-to-install elements are approx. 8 m in length and are fastened with stainless steel drill screws or thread-cutting screws.

3 FischerPANEEL Economical with versatile design possibilities FischerPANEELE are functional building elements for industrial, office and administrative construction. Ventilated at the rear, the FischerPANEELE are used for the aesthetic cladding of solid walls, frequently in association with thermal insulation, or as the outer skin of multiskin metal walls. Mineral fibre boards - non-flammable as per DIN 4 - are mainly employed as thermal insulation. This means outstanding thermal protection which reduces heating costs and damage to the environment considerably. The elements can be mounted quickly and economically onto any kind of substructure. They can be arranged both vertically and horizontally. The ready-to-install elements are approx. 8 m in length and are fastened with stainless steel drill screws or thread-cutting screws. Excellent protection against corrosion The basic material employed is steel sheet S 80 GD as per DIN EN 4, with a zinc coating of G 5 or alloy galvanisation Galfan GA 55 as per DIN EN 4. In addition, the material is polymer-coated. Polyester (5 µm), Colorcoat Prisma 50 µm, polyester-powder coating 60 µm or PVC-spraying µm can be selected as the coating system. The protection against corrosion is K III in accordance with DIN Due to the additional colour coating of the material, planners and architects have a large number of colour combinations at their disposal. Please order the colour chart Polyester. Fischer has had decades of experience in the manufacture and supply of prefabricated construction elements for commercial buildings. Contact us. We would be pleased to advise you. FischerPANEELE are manufactured on a new profiling line which guarantees a constant and high quality result. The elements have a large bending radius, which is a particular advantage in the case of coatings only 5 µm thick. 3

FischerPANEEL Multi-skin metal wall Wall cladding on solid wall 6 4 3

separating strip 5 Sealing strip 6 Drill screw Thermal insulation 8

plug/stainless steel screw Concrete construction 5,5,0 5 Longitudinal

element sheet thickness g [kg/m²] length coating t [mm] max.

4 FischerPANEEL Multi-skin metal wall Wall cladding on solid wall FischerKASSETTE FischerPANEEL 3 Drill screw 4 Thermal separating strip 5 Sealing strip 6 Drill screw Thermal insulation 8 Powder actuated fastener Steel construction Z-profile Wall plug/stainless steel screw Concrete construction 5,5,0 5 Longitudinal joint formation FischerPANEEL Microlining 3 Self-drilling screw 4 Thermal separating strip 5 Liner tray profile/z-profile 6 Thermal insulation Range of Products FischerPANEEL element weight element sheet thickness g [kg/m²] length coating t [mm] max. L [m] * Standard sheet thickness 0.88 mm 30 0,5,40 0,88* 8,60 8.) 5 µm polyester/rsl 50 µm Prisma/RSL polyester powdercoating 60 µm, PVC-spraying µm, 55% AlZn AZ 85, (Aluzinc) 4.) recommended max. length RSL = Reverse side coating µm

5 Technical town hall 4654 Oberhausen-Sterkrade Cladding: FischerPANEEL Colour: White aluminium RAL 006 (5 µm polyester coating) 5

6 FischerPANEEL Details Verge Flashing (Attica) / Gable Verge Industrial Guttering Window Flashings External Corners (. Type) Sill Flashing External Corners (. Type)

7 Jamb Flashings for Doors, Windows and Other Openings (. Type) Jamb Flashings for Doors, Windows and Other Openings (. Type) FischerKASSETTE FischerPANEEL 3 Verge capping 4 Verge flashing support 5 Connecting profile 6 Powder actuated fastener Hilti ENP--L5 Drilling screw JT3-3H-5.5 x 45/0-E6 8 Self-sealing screw JA3-6.5 x -E Blind rivet AL/E 4.8 x 8.3 Thermal separating strip Sealing strip illrid,30 x 4 Thermal insulation 3 Drilling screw JT3-H-5.5 x 5-E6 4 FischerTRAPEZ 5 Vapour barrier 6 Thermal insulation Roof sealant 8 Eaves purlin Edge profile 0 Guttering support Guttering Special guttering profile 3 Drip flashing 4 Precompressed sealing strip illmod SFI 30 x External corner flashing (large) 6 Corner profile Liner tray profile change (top) 8 Liner tray profile change (bottom) Upper jamb flashing 30 Lower jamb flashing 3 Self-sealing screw JZ3-63 x -E6 3 Blind rivet AL/V 4.8 x.4 33 Screw M x L 34 Stiffener 8 mm 35 Liner tray profile change (side) 36 Closed jamb flashing 3 Corner profile 38 External Corner flashing (small) 3 Z-Profile 40 Closed jamb flashing Assembly: The FischerPANEEL is like a shallow trapezoidal profile but with a few peculiarities. The difference to the trapezoidal profile is in the narrow valley with almost vertical webs. The other differences are the broad crowns with large outer bending radii. Over-bending should be avoided during assembly, otherwise permanent deformations might occur on the wide crowns. This is also the case for transporting full bundles by crane and transporting single panels to the assembly site by hand. Due to the steep webs, butt jointing is not possible. When inserting the self-sealing or drilling screws it should be noted that, due to the narrow valleys, the bit stop of the electric drill must be removed. A drilling groove has been profiled into all the valleys so that the drill bit cannot scratch the webs of the FischerPANEEL. In any case, an exact alignment of the substructure is important, A two-part, adjustable spacing construction should be given preference over a one-part construction such as Z profiles. When mounting the FischerPANEEL, the panels must not be subjected to any loading in a traverse direction, as lateral drawing leads to concave deformation and lateral pressure to convex deformation of the wide crowns, which in turn means an optical impairment. It is therefore a good idea to place a browning rod over the four crowns during bolting in order to ensure that neither convex nor concave deformations occur in the traverse direction.

8 FischerPANEEL Load Tables Load values Load tables calculated as per DIN 880. Single span support End support width a 40 mm sheet dead thickness t weight g [mm] [kn/m²] 0,5 0,04 Permissible load q [kn/m²] in span L [m] 0,60 0,80,00,0,40,60,80,00,0,40,60,80 3,00 3,0 3,40 3,60 3,80 4,00 4,0 4, Double span support End support width a 40 mm Intermediate support width b 60 mm sheet dead thickness t weight g [mm] [kn/m²] 0,5 0,04 Permissible load q [kn/m²] in span L [m] 0,60 0,80,00,0,40,60,80,00,0,40,60,80 3,00 3,0 3,40 3,60 3,80 4,00 4,0 4, Intermediate support width 40 mm [max. loading capacity including safety values in kn/m²] 0,5 0, End support width a 40 mm Intermediate support width b 60 mm sheet dead thickness t weight g [mm] [kn/m²] 0,5 0,04 Permissible load q [kn/m²] in span L [m] 0,60 0,80,00,0,40,60,80,00,0,40,60,80 3,00 3,0 3,40 3,60 3,80 4,00 4,0 4, Intermediate support width 40 mm [max. loading capacity including safety values in kn/m²] 0,5 0, Line = permissible load including safety values Line = permissible load with deflection of f L/50 Line 3 = permissible load with deflection of f L/300 Line 4 = permissible load with deflection of f L/500 The permissible loading value of the wind pressure load table must be compared to the permissible loading value of the wind suction load table. The smaller of the two values is definitive. 8

9 Load values Load tables calculated as per DIN 880. Single span support End support width a 40 mm sheet dead thickness t weight g [mm] [kn/m²] 0,5 0,04 Permissible load q [kn/m²] in span L [m] 0,60 0,80,00,0,40,60,80,00,0,40,60,80 3,00 3,0 3,40 3,60 3,80 4,00 4,0 4, Double span support End support width a 40 mm Intermediate support width b 60 mm sheet dead thickness t weight g [mm] [kn/m²] 0,5 0,04 Permissible load q [kn/m²] in span L [m] 0,60 0,80,00,0,40,60,80,00,0,40,60,80 3,00 3,0 3,40 3,60 3,80 4,00 4,0 4, Triple span support End support width a 40 mm Intermediate support width b 60 mm sheet dead thickness t weight g [mm] [kn/m²] 0,5 0,04 Permissible load q [kn/m²] in span L [m] 0,60 0,80,00,0,40,60,80,00,0,40,60,80 3,00 3,0 3,40 3,60 3,80 4,00 4,0 4, Line = permissible load including safety values Line = permissible load with deflection of f L/50 Line 3 = permissible load with deflection of f L/300 Line 4 = permissible load with deflection of f L/500 Smaller permissible spans may result from the determination of the fastening depending on the type of substructure and the choice of fastener. In certain cases the static calculation will be definitive.

12 Product range FischerTHERM FischerTRAPEZ FischerTRAPEZ-Acoustic FischerKASSETTE FischerKASSETTE-Acoustic FischerWELLE FischerPANEEL FischerKLIPTEC Flashings and accessories Fischer Profil GmbH Waldstraße 6 D-550 Netphen-Deuz Telefon +4 (0) 3/ Telefax +4 (0) 3/ info@fischerprofil.de This information has been created in the knowledge and belief that it is accurate. Tata steel and its subsidiaries does not accept responsibility or liability for errors or information which is found to be misleading. Reproduction is prohibited Data subject to change without notice

Cladding Profiles. Technical Specifications

Cladding Profiles. Technical Specifications Cladding Profiles Technical Specifications Cladding Profiles Introduction Contents Specifying Euroclad cladding profiles has several advantages. The shadow effect of the wide crest and narrow trough typical