ANTI-VIBRATION MOUNTS
|
|
|
- Norman Cummings
- 5 years ago
- Views:
Transcription
1 ANTI-VIBRATION MOUNTS
2 MALE-MALE BUFFERS (MM) Anti-vibration buffers with threaded stud both ends. On stock in medium hardness (55-60 shore). Part Number D H G I Max Compression Old Reference (N) MM18X M MM20X M MM25X M MM30X M MM30X M MM30X M MM40X M MM40X M MM50X M S1 MM50X M * MM50X M MM50X M MM50X M MM75X M MM75X M MM100X M *slight dimensional differences between old & new
3 FEMALE-FEMALE BUFFERS (FF) Anti-vibration buffers with female thread both ends. On stock in medium hardness (55-60 shore). Part Number D H G t Max Compression Old Reference (N) FF20X M FF30X M FF40X M FF40X M FF50X M S1 FF50X M FF75X M FF100X M FF150X M
4 MALE-FEMALE BUFFERS (MF) Anti-vibration buffers with threaded stud one end and female thread the other end. On stock in medium hardness (55-60 shore). Part Number D H G I t Max Compression Old Reference (N) MF20X M MF25X M MF30X M MF30X M MF30X M MF40X M MF40X M MF50X M MF75X M MF100X M
5 MALE-MALE WAISTED BUFFERS (MW) Anti-vibration buffers with threaded stud both ends. On stock in medium hardness (55-60 shore). Part Number D H G I Max Compression Old Reference (N) MW25.5X M MW60X M
6 FEMALE BUMPERS (FB) Anti-vibration buffers with female thread one end. On stock in medium hardness (55-60 shore). Part Number D H G t Max Compression Old Reference (N) FB20X M * FB30X M * FB40X M * FB50X M * FB75X M FB100X M *slight dimensional differences between old & new
7 MALE BUMPERS (MB) Anti-vibration buffers with threaded stud one side. On stock in medium hardness (55-60 shore). Part Number D H G I Max Compression Old Reference (N) MB18X M MB20X M MB25X M MB30X M * MB40X M * MB50X M * MB75X M MB100X M *slight dimensional differences between old & new
8 MALE CONICAL BUMPERS (MCB) Anti-vibration buffers with threaded stud one side. On stock in medium hardness (55-60 shore). Part Number D H G I Max Compression Old Reference (N) MCB50X M MCB50X M MCB100X M * *slight dimensional differences between old & new
9 MACHINE MOUNTS Anti-vibration mounts - designed for mounting machines, engines & pumps. Mounting holes in base plate & a threaded hole in the top. On stock in medium hardness (55-60 shore)
10 MACHINE MOUNTS (cont d)
11 MACHINE MOUNTS (cont d)
12 MACHINE MOUNTS (cont d)
13 CONE MOUNTS
14 CONE MOUNTS
15 CONE MOUNTS S1
16 CONE MOUNTS S5
17 CONE MOUNTS
18 MEGIFLEX DISCS Part Number A a B b C H s E R r Max Load (N) Deflection (mm)
19 RING ELEMENTS Part Number A a B b C H s E R r Max Load (N) Deflection (mm)
20 MEGI BUSHES Dimensions Radial Load Axial Load Part Number A B C D Fr (N) cr (N/mm) Fa (N) ca (N/mm) S
21 MEGI BUSHES Torsion Max Static Loads Spring Constant Max Peak Loads Part Number angle Torque (Nm) c (Nm/degree) angle Torque (Nm) S
22 MEGI BARS Part Number B H h s Max length (mm)
23 MEGI BARS (FLANGED) Part Number Dimensions (mm) Compression Loads B H h s1 s2 L L1 Spring rate (N/mm) Max Load (kn) Shear Loads Spring rate (N/ mm) Max Load (kn)
24 HANGING MOUNTS (HM) & RECTANGULAR BUFFERS (RP) Part Number A B C D E F G H 1 H 2 H 3 H 4 J L S HM-25 27, , , , ,5 HM-32 27, , ,5 Part a b d 1 d 2 d 3 e g h l k r 1 r 2 s L Number RP , RP , RP , RP ,
25 MINI MACHINE MOUNTS Part Number d b h l a d 1 h 1 g l 1 e s MINI ,5 MINI ,5 MINI ,0 Load Data - red line indicates maximum continuous load Mini 30 (55 shore) Mini 45 (55 shore) Mini 70 - medium (55 shore - left) & hard (65 shore)
26 Most of these products are available to buy online: For our full Anti-Vibration range please see: NEED TECHNICAL ADVICE? Contact Gerry, Kate or Matt Lodge Farm Business Centre Wolverton Road Castlethorpe Milton Keynes MK19 7ES
TOLERANCE RINGS Tel
TOLERANCE RINGS Tel. 01908 511733 TOLERANCE RINGS Short lead times & small minimum order quantities. Can also e made to your requirements. What is a tolerance ring? It is a corrugated metal strip that
TRACK GUIDANCE SYSTEMS
EURO-BEARINGS LTD TRACK GUIDANCE SYSTEMS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com INTRODUCTION EURO-BEARINGS LTD www.euro-bearings.com Tel. 01908 511733 This linear guidance
ANTI-VIBRATION MOUNTS
SECTION 21 - ANTI-VIBRATION MOUNTS ANTI-VIBRATION MOUNTS Male/Male Thread Anti-Vibration Mount... 21-1 Male/Female Thread Anti-Vibration Mount... 21-2 Female/Female Thread Anti-Vibration Mount... 21-3
Specialists in Anti-Vibration Mountings and Rubber Engineering Components
Specialists in Anti-Vibration Mountings and Rubber Engineering Components Index Mounting Selection Page 1 Cylindrical Bobbins Page 2-7 Buffers & Bump Stops Page 8-11 Instrument & General Purpose Page 12-13
ANTI VIBRATION MOUNTS
ANTI VIBRATION MOUNTS Insulators The insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that they can be anchored
Buffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
EURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE. Tel: +44 (0)
COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE email: sales@euro-bearings.com Tel: +44 (0)1908 511733 2015 CATALOGUE CONTENTS COMBINED ROLLER BEARINGS Standard CR Bearings Eccentric Adjustable
Locking elements. Technical information
Technical information ocking elements.principle of operation. These parts operate on the basis of an interference fit between two conical rings crewed together. The outer ring expands and exerts a pressure
Assortment 2013_FPT BOOK.indb /02/13 6:57 PM
Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self
Vibration Control Technology Industry. Catalogue 2012
Vibration Control Technology Industry Catalogue 212 The information in this product catalogue is based on the experience gained in decades of research on the development and manufacture of components for
MOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
SCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
MOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
Fixed Points. 7.i
Products 7.0 Basic Assemblies 7.1 Trestle Arrangement (Assembly and Scope of Delivery) 7.2 Soundproof Fixed Points 7.3 Procedure for designing of trestle arrangement 7.4 Type tested static for trestle
Size 00 Size 0-5 Size 6-8. Technical Data. Setscrew 1TF 2TF 3TF 3) 2) R Pilot bore max.
Standard for a torque range up to 6800 Nm Standard zinc-coated and yellow passivated ting possible while in place Asbestos-free and rust-resistant friction linings Securing of the setting nut by locking
TORQUE LIMITERS SERIES 100
TORQUE LIITERS SERIES 100 Engaged Engaged TORQUE LIITER FOR SERVO DRIVES BACKLASH FREE Quality and Autogard are synonymous with overload protection. The company s reputation for high quality products is
SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
Local solutions for individual customers worldwide PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES STAUFF UK. Super Air Service!
Local solutions for individual customers worldwide STAUFF UK PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES www.stauff.co.uk PNEUMATIC PIPEWORK COMPONENTS AND ACCESSORIES Tube Connectors In Line Flow Control
TH23 POWER HOOK Spare Parts Manual
TH23 POWER HOOK Spare Parts Manual For spares and service support & the latest service network listings refer to www.edbro.com Spares Tel: +44 (0) 120 4902319 Spares fax: +44 (0) 120 4393561 Service Tel:
SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB
Flowserve TX2 Butterfly Valves Triple Offset TECHNICAL BULLETIN FCD DVENTB0400-00 1 TABLE OF CONTENTS PAGE Theory of Operation.. 3 General Ordering Information 4 Torque values ASME Cl. 150. 5 Torque values
Hours / 100 Marks Seat No.
17610 16172 4 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
TXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
iglidur PRT polymer slewing ring bearings
polymer slewing ring bearings Completely maintenance-free Easy to install and replaceable sliding pads High wear resistance For very high loads and high stiffness Stainless steel versions available Extensive
TELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
CLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
External Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
Hydraulic Motor (Radial Piston, Multi-Stroke)
Industrial Hydraulics Electric Drives and Controls inear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics Hydraulic Motor (Radial Piston, Multi-Stroke) RE 15 08/10.94 1/8
CLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
"PKX" Series Right Angle ServoFit Precision Planetary Gearhead Performance Specification Overview
P "P" Series Right Angle Performance Specification Overview P221 P222 P21 P22 P421 P422 P521 P522 P721 P722 P821 P822 P922 4 5 4 7 5 8 7 8 Acceleration Torque in.lbs. 195 576 106 2,657 6,201 14,17 26,574
DEPARTMENT OF MECHANICAL ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING UABMCC01-DESIGN OF MACHINE ELEMENTS QUESTION BANK Prepared By: Dr.S.Prabhakaran, Associate Professor/Mechanical Engg. Unit -1 STEADY STRESSES AND VARIABLE STRESSES
TRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
Stationary power chuck Dividing head / Tailstock
Stationary power chuck Dividing head / Tailstock 10/2015 Contents: Stationary power chuck type SPA, pneumatic...4 Stationary power chuck type SPA, round, pneumatic...5 Stationary power chuck type SHP,
FLEXIBLE AND TORSIONALLY RIGID. THE ULTIMATE COUPLING BELLOWS COUPLINGS. SERIES BK 15 10,000 Nm.
FLEXIBLE AND TORSIONALLY RIGID. THE ULTIMATE COUPLING BELLOWS COUPLINGS SERIES BK 15 10,000 Nm TORSIONALLY STIFF METAL BELLOWS COUPLINGS Areas of application: Servo drives CNC axes Robotic axes Manipulators
"KS" Series Right Angle ServoFit Precision Planetary Gearhead Performance Specification Overview
"" eries Right Angle ervofit Precision Planetary Gearhead Performance pecification Overview ize 402 403 502 503 702 703 Acceleration Torque M2B MAX in.lbs. 797 1,772 3,543 Nm 90 200 400 Output Torque Nom.
CYLINDRICAL STUD MOUNT SERIES
CYLINDRICAL STUD MOUNT SERIES Versatile, low-cost, lightweight stud type mounts for vibration, shock, noise control, and motion accommodation. APPLICATIONS Fans Appliances HVAC equipment Electronic equipment
BMI0703P17F servo motor BMI 3-phase - keyed IP54 multiturn p/t x 4096 t - brake
Characteristics servo motor BMI 3-phase - keyed IP54 multiturn - 32768 p/t x 4096 t - brake Main Range compatibility Product or component type Device short name Complementary Maximum mechanical speed Aug
BEVEL GEAR UNITS ZZ-SERVOLINE
BEVEL GEAR UNITS ZZ-SERVOLINE ZZ-SERVOLINE GEARBOX DESIGN AND FUNCTIONAL FEATURES Gear Ratios i= 3:1 i= 4:1 i= 5:1 i= 6:1 i= 8:1 i= 10:1 i= 12:1 i= 15:1 Spiral Bevel Gear KLINGELNBERG tooth system Hypoid
Locking Assemblies Shrink Discs Rigid Couplings.
M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation
Hydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
INSTALLATION AND HANDLING
SHAFT / AXIS MISALIGNMENT Exact alignment of the shaft axes extends the service life of the coupling and adjacent components by minimizing reaction loads from misalignment. FIT CLEARANCE Overall shaft
5 Bearing Load. 5.2 Distribution of Bearing Load. 5.3 Dynamic Equivalent Load Calculation of dynamic equivalent load
5 Bearing Load 5.2 Distribution of Bearing Load Table 5.4 Radial load factor (X) and axial load factor (Y) In order to determine the radial load distribution to each bearing attached to a shaft, use the
Linear Axes Technical Data Summary
components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468
ALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
TECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks
For advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX
technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0
Bell-house Mounted Arrangement. Highly Flexible K Coupling
Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed
ILE1B661PC1A1 brushless dc motor V - Profibus DP interface - L = 174 mm - 18:1
Characteristics brushless dc motor 24..36 V - Profibus DP interface - L = 174 mm - 18:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1640.00 USD Main Range
ILE2K661PC1A1 brushless dc motor V- EtherNet/IP interface - L = 174 mm- 18:1
Characteristics brushless dc motor 24..48V- EtherNet/IP interface - L = 174 mm- 18:1 Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network number
CONTENT. 1. Syllabus 2. Introduction 3. Shaft 4. Coupling. Rigid coupling. Flange coupling. Sleeve (or) muff coupling Split muff coupling
UNIT II 1. Syllabus 2. Introduction 3. Shaft 4. Coupling Rigid coupling CONTENT Flange coupling Protected flange coupling Unprotected flange coupling Marine type flange coupling Sleeve (or) muff coupling
Screwjack options. When stainless steel screws are specified, we can supply the flange end and rod end in stainless if requested.
Raised cover CA Available for MA screwjacks, the steel raised covers with toleranced dimensions act as a centring register, also allow the fitting of bronze guide bushes, protective tubes and bellows.
RT2 RT3. ORIGINAL UNIVER Original design and technology. INDUSTRIALIZED Industrialized components and advanced technology
RT Telescopic cylinders RT2 2 stages 25 mm ORIGINAL UNIVER Original design and technology INDUSTRIALIZED Industrialized components and advanced technology REDUCED DIMENSIONS 60% less than standard cylinders
MORFLEX COUPLINGS Double MORFLEX Series CC Hub and Block Assemblies Round steel flanges
MORFLEX COUPLINGS The MORFLEX coupling should be installed where considerable dimensional misalignment may result, or is expected. It also cushions shock loads and absorbs vibration. The MORFLEX coupling
eco-series Energy-efficient stirring and agitating technology 90% 75dB mechatronics low noise emission
mechatronics eco-series Energy-efficient stirring and agitating technology 75dB low noise emission 90% 1 Who we are Since its foundation in 1988, PTM mechatronics GmbH develops, produces and distributes
PRODUCT CATALOGUE DOUBLE UNIVERSAL JOINT (DUJ) SHAFTS
PRODUCT CATALOGUE DOUBLE UNIVERSAL JOINT (DUJ) SHAFTS For driven steering axles, marine stern drive and special applications CONTENT DRIVESHAFTS PRODUCT RANGE 3 B-SERIES 4 T-SERIES 5 M-SERIES 6 ENGINEERING/TEST
Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
Intermot Hydraulic Motors. Drum Brakes RC Series
Intermot Hydraulic Motors Drum Brakes RC Series TECHNICAL CATALOGUE INDEX General information Pag. 10 Technical data Pag. 14 Dimensional drawings Pag. 15 Ordering instructions Pag. 17 9 Hydraulic fluids
ILE2T661PB1A3 brushless dc motor V - Modbus TCP interface - L = 174 mm - 54:1
Characteristics brushless dc motor 24..48 V - Modbus TCP interface - L = 174 mm - 54:1 Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 1540.00 USD Main Range of
TITAN STEERING RACK ASSEMBLIES
TITAN STEERING RACK ASSEMBLIES NOTE: All prices are SUBJECT TO CHANGE and freight is NOT INCLUDED. All Titan rack and pinion assemblies are available with one of two different tooth forms. These are identified
BLUE-Line by SGF/MMB. HexaFlex-Blue. The Newest Marine Coupling Technology. See overleaf for more details.
BLUE-Line by SGF/MMB The Newest Marine Coupling Technology HexaFlex-Blue See overleaf for more details. HexaFlex BlueLine (flexible propeller shaft couplings) When a rigid propeller shaft is fitted to
Trelleborg Industrial Antivibration Systems. A safe choice all over the World
Trelleborg Industrial ntivibration Systems safe choice all over the World Trelleborg Industrial VS global supply and manufacturing of Novibra and Metalastik antivibration solutions. uide when choosing
Merkel Guide Ring Guivex SBK
Product description Guide rings for piston rods can be used for very heavy loads in hydraulics. The profiling (patented) on the static side of the guide ring ensures an even distribution of stress. Product
RCK CLAMPING ELEMENTS
RCK CAMPING EEMENTS SERIES RCK 11 page 6 SERIES RCK 13 7 SERIES RCK 15 8 SERIES RCK 16 9 SERIES RCK 19 10 SERIES RCK 40 11 SERIES RCK 45 12 SERIES RCK 50 13 SERIES RCK 55 14 SERIES RCK 60 15 SERIES RCK
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load
Vibration Control Technology Industry. Catalogue 2012
Viration Control Technology Industry Catalogue 212 The information in this product catalogue is ased on the experience gained in decades of research on the development and manufacture of components for
The following pages are an excerpt from the North American Product Technical Guide, Volume 1: Direct Fastening Technical Guide, Edition 18.
The following pages are an excerpt from the North American Product Technical Guide, Volume 1: Direct Fastening Technical Guide, Edition 18. Please refer to the publication in its entirety for complete
BEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater.
GENERAL SPECIFICATION INTENT The equipment to be supplied by manufacturer includes the screw pumps, support for the drive unit, profile plates, motors, gearboxes, couplings, guards, upper and lower bearing
hydraulic actuated products EP: EP:
In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide hydraulic actuated products EP: 0 812 397 EP: 1 666 748 Overview Hydraulic shrink disc SHS Standard
PROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment
PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing
50 years of Reliable Field History
Coupling Comments The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 10 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges
External gear pumps Type G2, Series 4X
E 1 /.99 External gear pumps Type G2, Series X E 1 /.99 NS to 22 up to 2 bar up to 22. cm eplaces:.98 New principle of housing sealing, thereby giving a very long housing service life ong seal service
Ballscrews. Rotating Nut ballscrews. Ballscrew X-Y retrofits for mills. Precision ground accuracy to mm/300mm. High load drive 50 to 350T
Ballscrews An ideal drive mechanism where constant motion or high frequency cycling is required. Ballscrews provide highly efficient transmission with low starting torque, smooth running and quiet operation.
Fixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
Highly Flexible Couplings ELPEX-S Series
Highly Flexible Couplings ELPEX-S Series /2 Overview /2 Benefits /2 Application /2 Design /4 Function /4 Configuration /6 Technical data /9 Type E /9 Selection and ordering data /10 Type ESD /10 Selection
Installation Dimensions
Installation Dimensions Model 16FF105 Model 16AF465 Model 16CF545 NOTE: Installation drawings are available at www.hecogear.com under Products Performance Data Torque (1) Continuous Intermittent Peak 30,000
ILE1F661PB1A0 brushless dc motor V - CANopen DS301 interface - L = 122 mm - w/o gearbox
Characteristics brushless dc motor 24..36 V - CANopen DS301 interface - L = 122 mm - w/o gearbox Product availability : Stock - Normally stocked in distribution facility Price* : 840.00 USD Main Range
Vibration Solutions Catalogue
Vibration Solutions 2013-2014 Catalogue Customer Service HEAD OFFICE ABN: 19 124 112 009 48-86, Powell Street Unit 4, 18-22, Lexia Place ACN: 124 112 009 Bendigo, Victoria, 3550, Australia Mulgrave, Victoria,
Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48
Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG NEWPOINT PLACE LAWRENCEVILLE, GA PHONE: (770) FAX: (770)
STUD WELDING EQUIPMENT & ACCESSORIES CATALOG WWW.WELDSTUD.COM 4505 NEWPOINT PLACE LAWRENCEVILLE, GA 30043 PHONE: (770)-962-3657 FAX: (770)-962-3667 6/2008 FERRULE GRIPS CLOSED FERRULE GRIP (1 LONG) BRASS
Torque Sensors, Torque Transducers
Torque Sensors, Torque Transducers Rotating with Slipring DR-2 1..500 0.1 - Cylindrical Shaft with Keyway DR-20 1..500 0.1 Standard Cylindrical Shaft with Keyway Sensors for Screw Driving Systems DR-1
Spare parts list Pentruder 6-16
Spare parts list Pentruder 6-16 Page A-G Pentruder 6-16 Page A Spare parts list Pentruder 6-16 Page A 6-16-A01 56020100 Chassis 6-16 6-16-A02 34190100 Gear shaft primary 6-16 6-16-A03 35130100 Gear wheel
Highly Flexible Couplings ELPEX-B Series
Siemens AG 200 Highly Flexible Couplings ELPEX-B Series /2 Overview /2 Benefits /2 Application /2 Design / Technical data /5 Type EBWN /5 Selection and ordering data /6 Type EBWT /6 Selection and ordering
TPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
List of parts for SAB 128 Mk 4
List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39
V MOUNT SERIES. Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations.
V MOUNT SERIES Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations. APPLICATIONS Class 6,7,8 truck engines Bus engines Off-highway vehicle engines On & off-highway
35 & 35D. P.O. Box 1388 West Sacramento, CA (916) Fax: (916)
35 & 35D P.O. Box 1388 West Sacramento, CA 95691 (916) 372-5411 Fax: (916) 373-0952 www.hecogear.com Model 35 Installation Dimensions Model 35CF2-66-1 (Illustrated with Code 2 Flanged Output Shaft) 1.10
YMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
RE / /09.97
RE 5 05/0.98 05/09.97 Hydraulic Motor (Radial Piston, Multi-Stroke) Type MCR 0, Series X RE 5 05/0.98 Size0 to 400 up to 4 bar up to 400 cm up to 07 Nm Replaces: 09.97 Compact, sturdy construction Smooth
Shaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
Installation Instructions MX-5 Dual Air Horns
440 Rutherford St. P.O. Box 847 Goleta, CA 93117 1-800-667-7872 FAX 805-692-2525 www.mossmotors.com Tools required: Phillips screwdriver, 8mm, 10mm and 21mm sockets, 8mm and 10mm combination wrenches,
Airflex. Airflex DBB & DBA Brakes
36191_12pg Covers 8/11/03 6:06 PM Page 01 Airflex Airflex DBB & DBA Brakes These spring-applied, pressure released, disc style brakes develop equal torque in either direction of rotation. Their torque
Accessories. Effective December 2012 Replaces November PL 1401-Q B600 - Mistral - Typhon II - B1500 Accessories 1/10
MOUVEX PARTS LIST PL : 1401-Q01 MODEL : B600 - Mistral - Typhon II - B1500 Section 1401 Accessories Effective December 2012 Replaces November 2012 PL 1401-Q01 12.12 B600 - Mistral - Typhon II - B1500 Accessories
SIZES FROM ,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS
LP SIZES FROM 350 20,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS GENERAL INFORMATION ABOUT R+W DISC PACK COUPLINGS: SERVICE LIFE R+W disc pack couplings are fatigue resistant and wear free for an infinite
Stud Welding Products,Inc
Stud Welding Products,Inc ACCESSORIES CATALOG L 3-7/8 3- B-4N/B- 3/8 1-2- www.studweldprod.com Info@studweldprod.com.com Los Angeles, San Francisco, Phoenix, Seattle Phone: (800) 252-1919 Studs Since 1981
Heavy Duty 3500/5000. psi rating. series. hydraulic cylinders. bulletin 0207XH
3500/5000 psi rating Heavy Duty series XH hydraulic cylinders bulletin 0207XH www.royalcylinders.com 1 Contents Page Description 1 Contents 2 Features Description Mounting Dimensions 3 C Clevis Mount 3
MF7. Hydraulic Lift Pumps and Related Components
Page Hydraulic Pumps 2- Hydraulic Pump Repair Kits - Auxiliary Pumps, Radial Pumps, Filters - Covers - Cylinders Hydraulic Quick Couplers MF Pumps and Related MF 2 & Hydraulic Pumps S.0 Hydraulic Pump
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
Precision ball screws
Recirculating ball screws Precision ball screws Thomson Linear Motion. Optimized. Linear Motion. Optimized. The ideal solution often is not found in the fastest, most robust, most precise or even the most
R 4350L R 2500L R 2050L R 3100L. model
radial piston motors fixed displacement, high torque, low speed 200L 450L 740L 1000L 1350L displacement cm 3 188 442 740 983 1.344 1.639 2.050 2.470 3.080 4.310 5.310 6.800 6.800 11.600 rated pressure