Torque Sensors, Torque Transducers
|
|
- Willa Francis
- 5 years ago
- Views:
Transcription
1 Torque Sensors, Torque Transducers Rotating with Slipring DR Cylindrical Shaft with Keyway DR Standard Cylindrical Shaft with Keyway Sensors for Screw Driving Systems DR DR Standard DR DR Standard Rotating Contactless DR USB Torque Sensor, inclusive Configurationand Evaluation- Software 0.1 Standard Cylindrical Shaft DR Option Cylindrical Shaft DR-2112 DR Option Cylindrical Shaft
2 DR-2112-R DR-2412-R Option Cylindrical Shaft DR-2212 DR Option Cylindrical Shaft DR-2212-R DR-2512-R Option Cylindrical Shaft DR Cylindrical Shaft DR-2500 DR Miniature Torque Sensor without Bearings 0.1 Option (only Speed ) Cylindrical Shaft DR Bearingless 0.1 Option (only Speed ) Clamping Ring Hub / Radial Clamping Hub Keyway MR Sensor for Belt- Pulleys 0.1 Option Mounting-Hole with Keyway DR External / Internal Spline Dual Sensor DR-2208 DR-2508 DR-2531 DR / / Dual Sensor 0.5 / / Dual Sensor 0.1 Option Cylindrical Shaft 0.1 Option Cylindrical Shaft Sensors for Screw Driving Systems DR USB Torque Sensor, inclusive Configurationand Evaluation- 0.1 Standard
3 DR-2113 DR-2413 Software Option DR Option DR USB Torque Sensor, inclusive Configurationand Evaluation- Software 0.1 Standard DR-2153 DR Option DR Option DR-2114 DR-2414 DR-1986 DR-1987 DR-1988 DR Option Standard External / Internal Spline Non-Rotating (Static) D Reaction Torque, e.g. Extruder Cylindrical Shaft DK Reaction Torque, e.g. Test Stands Cylindrical Shaft with Keyway DV Survey of Assembly Tools for Screws and Nuts Male Square / Female Square D Survey of Assembly Tools for Screws and Nuts ¼" Hexagon / Quick Change DH For Very Small s Flange with Spigot / Cylindrical Shaft
4 DFW Compact Design Flange with Center Hole / Cylindrical Shaft with Keyway DFW D Survey of Assembly Tools for Screws and Nuts Survey of Assembly Tools for Screws and Nuts Flange with Center Hole / Square Flange with Center Hole / Square Socket D Compact Design Flange with Spigot D Compact Design Flange with Large Through Hole and Center Counter Bore DF Compact Design Flange with Center Hole D Short Design Flange Force Sensors - Force Transducers Compression and Tension Force K kn E.g. Material Testing Machines, Press-In Force, Roll Force Applications.. K kn E.g. Material Testing or Rope Force K kn E.g. Tension/Compressive Testing Machines or Survey of Actuating Forces K kn E.g. Material Testing or Spring Force K kn E.g. Tension/Compressive Testing Machines
5 K kn E.g. Material Testing Machines or Press-In Force Dual- Force Transducer K-1882 Dual- Force Transducer 1 / 10 kn 15 / 150 kn 0.2 E.g. Monitoring of Assembly Forces in the Automobile Industry Special Accessories EF, EM, EF42, ED, E2, E3 Force Transmissions, Thrust Pieces and Mounting Flanges Compressive Force Sensors K-13 K-13B kn 0.5 E.g. Press-In Force Survey, Tablet Presses.. K kn 0.5 E.g. Press-In Force Survey K kn 1 E.g. Press-In Force Survey K kn 1 E.g. Press-In Force Survey K kn 0.5 K kn 0.5 Small Measured Displacement < 0.1 mm, e.g. for Press-In Force Survey Miniature Transducer for Shear Force and Press-In Force K kn 1..3 E.g. Preload of Screws K kn Universal Compression Sensor, e.g. Survey of Surface Pressure Plates or Press-In Force K kn 0.5 E.g. Survey of Press-In Force K kn 0.5 Miniature Transducer, e.g. Survey of Press-In Force K kn 0.3 Miniature Transducer, e.g. for Industrial Process Control for Press Fitting, Riveting, Clinching, Stamping..
6 Special Accessories K kn 1 EF, EM, EF42, ED, E2, E3 Miniature Transducer, e.g. for Pressing Tools, Impact s, Crash Testing, Punch, Stamping.. Force Transmissions, Thrust Pieces and Mounting Flanges Tension Force Sensors K kn 0.3 E.g. Solar Wing Control or Rope Force K N 0.2 Miniature Sensor, e.g. Survey of Rope Force or Force Determination of a Bowden Wire K N 0.2 Miniature Transducer, e.g. Force Determination of Belt Tensioners Special Accessories EF, EM, EF42, ED, E2, E3 Force Transmissions, Thrust Pieces and Mounting Flanges Special Sensors and Accessories K kn 1 Load Pin, e.g. Load in Deflector Rolls K or 2 kn 0.5 E.g. for Tension of Belt Conveyors in the Paper Industry DZ-1 60 N/mm² 0.5 Stress Sensor, e.g. Survey of Press-In Force, Material Stress or Liquid Level Monitoring
7 K N 0.1 K N 0.2 K kn 1 Force Sensor for Hand Force (Medical Load Cell) Force Sensor, e.g. for of Ball Bearing Friction Force Sensor, e.g. for of Tension Forces in Lathe s EF, EM, EF42, ED, E2, E3 - - Force Transmissions, Thrust Pieces and Mounting Flanges Multi-Component Sensors Torque static / Force Sensors N m / 20 N 0.5 N m / 50 N 0.2 (F); E.g. the Optimization of the Granulation of Abrasives N m / 100 N m / 100 kn 0.2 Screw Testing: Thread Friction Torque, Screw Head Friction Torque and Preload N m / 100 N m / 100 kn 0.2 Screw Testing: Thread Friction Torque, Screw Head Friction Torque and Preload N m / 60 N m / 40 kn 0.5 0,5 kn / 5 N m; 0,5 kn / 50 N m; 1 kn / 10 N m; 1 kn / 30 N m; 20 kn / 20 N m; 2 kn / 50 N m 0.3 (F) Screw Testing: Thread Friction Torque, Screw Head Friction Torque and Preload E.g. Optimization of the Cutting Force of Drills kn / 10 N m 20 kn / 20 N m 0.2 (F) E.g. Survey of the Characteristics of Elastomers kn / 10 N m 0.2 (F) E.g. Survey of the Bearing Friction of Ball Bearings
8 Torque Rotary / Force N m / 100N...5 N m / 500 N 0.4 (F) Option Torque -, Force -, Speed-, and Angle of Rotation ; e.g. for Continuous Stress Test of Pumps and Master Key Systems
Lorenz Lorenz sensors worldwide
Lorenz Lorenz sensors worldwide torque force weight sensors Our customers include companies in the following sectors: Our quality management system ensures quality at the highest level: Lorenz Messtechnik
More informationTorque Sensors Force Sensors Multi-Component Sensors
Torque Sensors Force Sensors Multi-Component Sensors Sensor Interfaces DIN Mounting Rail Devices Built-In Measuring Devices Portable Measuring Systems Tabletop and Laboratory Measuring Devices Highly precise
More informationMAXITORQ ELECTRICALLY ACTUATED CLUTCHES AND BRAKES
MAXITORQ ELECTRICALLY ACTUATED CLUTCHES AND BRAKES HOW TO SELECT THE CORRECT CLUTCH OR BRAKE The easiest way is to ask our application engineers. For clutch application, we need to know: Torque or H.P.
More informationTRANSDUCERS. Conversion of Measured Strain or Output Voltage into Physical Quantity. Sensitivity Decrease due to Cable Extension
2-2 Strain gage transducers are designed to transduce physical variables such as load, force, pressure, acceleration, vibration, displacement and torque into electric signals by using strain gages as sensing
More informationAssortment 2013_FPT BOOK.indb /02/13 6:57 PM
Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationProduct overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)
10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact
More informationSection 13. Tail Rotor Drive. RotorWay International A600 TALON Construction Manual. Section 13. Page A
RotorWay International Page A Tail Rotor Drive Procedures covered in this section: Install driveshafts and gearboxes; install drive belt and tensioner; fabricate and install tail rotor pitch actuator arms;
More informationDESIGN OF MACHINE MEMBERS - I
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DESIGN OF MACHINE MEMBERS - I (Mechanical Engineering) Time: 3 Hours Max Marks: 75 Answer any FIVE Questions
More informationPrecision Modules PSK. The Drive & Control Company
Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear
More information8710 EN. Potentiometric Displacement Sensors. Models 8710, 8711
Potentiometric Displacement Sensors Models 8710, 8711 Code: Delivery: Warranty: 8710 EN ex stock 24 months Model 8711 Model 8710 Application Displacement sensors models 8710 and 8711 with resistance tracks
More informationAMCB AccuStop TM. Clutch/Brake Combination Section F
Clutch/Brake Combination The Airflex AMCB AccuStop clutch/brake combination consists of an air-actuated disc clutch and a spring-applied disc brake. Engineered for small-to-medium tonnage ( to 0 ton),
More informationLIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm
LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison
More informationMorehouse Instrument Company
The Morehouse Universal Calibrating Machine is designed to use a compression force standard, proving ring or load cell to calibrate units under test in compression and tension. The reference standard and
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationhydraulic actuated products EP: EP:
In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide hydraulic actuated products EP: 0 812 397 EP: 1 666 748 Overview Hydraulic shrink disc SHS Standard
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More information10 Thrust ball bearings
10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings
More informationTORQLIGHT SAFETY COUPLINGS
LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction
More informationLocking Assemblies Shrink Discs Rigid Couplings.
M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation
More informationSKF FX Keyless Bushings
SKF FX Keyless ushings Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as a high-quality bearing manufacturer
More informationDEPARTMENT OF MECHANICAL ENGINEERING
DEPARTMENT OF MECHANICAL ENGINEERING UABMCC01-DESIGN OF MACHINE ELEMENTS QUESTION BANK Prepared By: Dr.S.Prabhakaran, Associate Professor/Mechanical Engg. Unit -1 STEADY STRESSES AND VARIABLE STRESSES
More informationTRADITIONAL SHAFT HUB CONNECTIONS
TABLE OF CONTENTS MAV locking devices.... Pg. 2 Traditional shaft hub connections...pg. 3 Advantages of MAV locking devices...pg. 4 The wedge principle..... Pg. 5 Installation removal...pg. 6 Characteristics....
More informationFor advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationBell-house Mounted Arrangement. Highly Flexible K Coupling
Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed
More informationPrecision levelling wedges Due to their large contact area Bilz precision levelling wedges (PK) for vibration and structure-borne noise insulation
28 Precision levelling wedges Due to their large contact area Bilz precision levelling wedges () for vibration and structure-borne noise insulation offer optimum support and stiffening of the machine bed.
More informationFAG Angular Contact Thrust Ball Bearings double direction
FAG Angular Contact Thrust Ball Bearings Basic designs Tolerances Preload Speed suitability Cage Lubrication are precision bearings with narrow tolerances. They are mainly used in precisiopindles of machine
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationSCHMIDT-KUPPLUNG GmbH
Loewe GK About us Many years of experience For 50 years, we have been advising machine manufacturers as partners for compact coupling systems. Our experience in power transmission has given us extensive
More informationHours / 100 Marks Seat No.
17610 16172 4 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
More informationContents. Index. Content
s MS motor - Range... 2 MS motor - Torque module... 3 MS motor - Valving cover... 4 MS motor - Multidisc brake... 5 MS motor - Bearing support... 6 MS motor - Drum brake... 7 Forklift truck drive axle...
More informationThe Classification Chart of PMI Linear Guideways
1 The Characteristics of MI s The Classification Chart of MI s 2 (1) igh positioning accuracy, high repeatability The MI linear guideway is a design of rolling motion with a low friction coefficient, and
More informationInstallation and Operating Instructions for EAS -NC clutch Type 45_. _. _ Sizes 02 and 03
Table of contents: Please read and observe this Operating Instruction carefully! A possible malfunction or failure of the clutch and any damage may be caused by not observing it. Page 1: - Table of contents
More informationInstallation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationPANEL ACCESS - CONTENT
- CONTENT PUSH-PUSH......... page 1 LATCHES & STRIKES....... page 2 TREE LOK......... page 3 SPECIFIC LATCHES (snap, 1/4 turn)...... page 4 PRO LOK......... page 5 TUFLOK (micro, standard, screw type).....
More informationInterface Webinar Wednesday. with Keith Skidmore
Interface Webinar Wednesday Torque 101 with Keith Skidmore www.interfaceforce.com 480 948 5555 Definitions What is a Torque Transducer? Rotary vs. Reaction Shaft vs. Flange Couplings Floating vs. Fixed
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationREMOVAL TF REMOVE TRANSFER INDICATOR SWITCH (a) Remove the switches and gaskets. HINT: Indicator switch:
20 NO. 1 NO. 2 F043499 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More information12.4 Miniature Type, MSC MSD Stainless Steel Series
12.4 Miniature Type, MSC MSD Stainless Steel Series A. Construction Carriage End Cap MSC Standard Type End Seal Rail MSD Wide Type Ball Retainer Bottom Seal 45 45 B. Characteristics MSC st ows with Gothic-arch
More informationTooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P
Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication
More informationTork-Mor Series Vane Style Hydraulic Rotary Actuators
Vane Style Hydraulic Rotary Actuators Vane Actuators Tork-Mor HRN Contents Features...2 Ordering Information...3 Specifications...4 Dimensional Data...5 Mounting... 6-7 Shaft...7 Limit Switch Actuator...7
More informationa measurable difference...
This testing machine with integrated steel plate welded frame structure, using single boom and double-function piston liner to load testing force and fixing specimen with cylindrical pin, load cell measuring
More informationTENTEC HYDRAULIC BOLT TENSIONING SYSTEMS
TENTEC HYDRAULIC BOLT TENSIONING SYSTEMS REACTION FREE OPERATION CUSTOM ENGINEERING SIMULTANEOUS TENSIONING 6 7 TENTEC CTST TOPSIDE HYDRAULIC BOLT TENSIONER The CTST range of topside bolt tensioning tools
More information10 Thrust ball bearings
Rolling bearings 10 Thrust ball bearings Designs and variants... 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages... 1010 Bearings with sphered housing
More informationSwivel Joint Heads (Basic Unit)
Swivel Joint Heads (Basic Unit) Design Configuration Weld edge preparation according to DIN 2559 or ANSI B16.25 Grease nipple/ ball Lifetime greasing Grease nipple only on request Stator Rotor Internal
More informationNEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e
Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue
More informationDesign, Analysis &Optimization of Crankshaft Using CAE
Design, Analysis &Optimization of Crankshaft Using CAE Dhekale Harshada 1, Jagtap Ashwini 2, Lomte Madhura 3, Yadav Priyanka 4 1,2,3,4 Government College of Engineering and Research Awasari, Department
More informationNME-501 : MACHINE DESIGN-I
Syllabus NME-501 : MACHINE DESIGN-I UNIT I Introduction Definition, Design requirements of machine elements, Design procedure, Standards in design, Selection of preferred sizes, Indian Standards designation
More informationPortofino Series Diagrams & Parts list
Portofino Series Diagrams & Parts list Diagram 1 For use with the Lighted & Non-lighted 10 x10 Portofino Series side post umbrella Diagram 2 For use with the Lighted & Solar powered 10 x10 Portofino Pro
More information4 Fenner Torque Drive Plus 3
Fenner Torque Drive Plus 3 offers; State of the art power ratings. Compact drive package - reduced weight. Quiet operation. Accuracy of positioning. Anti-static as standard. Runs on standard HTD pulleys.
More informationRA 320 IBC Battery. As at: 01/15/10 Time:17:04
Battery As at: 01/15/10 Time:17:04 Battery As at: 01/15/10 Time:17:04 Pos. Description Reference 01 Covering of battery 320.265 02 Battery 320.091 03 P...484 WA 04 P...485 PA 05 Battery container 320.261
More informationLinear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
More informationInstallation and Operational Instructions for EAS -Compact overload clutch Type 49_. 4._ Sizes 01 to 3
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationand zero rpm. Maximum recommended pressure is 110 psi (7.6 bar). Adjustment for speed is explained under Selection Procedure.
CB Construction Single Flange Dual Flange The type CB element assembly is designed and built to provide dependable clutch or brake service in the most exacting industrial applications. It is suited to
More informationInkoturn couplings. INKOMA - GROUP Couplings. Product description. Inkoturn couplings IKT. FRANCIS AND FRANCIS Ltd.
Product description The INKOM Inkoturn coupling (IKT) is a flexible coupling with high torsional rigidity, which has been developed for applications requiring high speed and where shaft is present. INKOM
More informationShaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
More informationVALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ME6503 DESIGN OF MACHINE ELEMENTS QUESTION BANK
VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ME6503 DESIGN OF MACHINE ELEMENTS QUESTION BANK Unit -1 STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS Part-A 1. What are the
More informationSSP TYPE. Cylindrical Spline Nut. part number structure B-16. When two spline nuts are used in close contact. major dimensions part number
SSP TYPE Cylindrical Spline Nut structure example SSP 8 - - T1 - - P / CU SSP type nut length blank standard long number of nuts attached to one shaft with special specification accuracy grade blank high
More informationFor advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX
technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0
More informationSchedule 80 PVC Industrial Products & Accessories True Union 2000 Industrial Ball Check Valves
Schedule 0 Industrial Products & Accessories True Union 000 Industrial Ball Check Valves Pressure Rating @ 7 F ( C), Water /" - " 5 psi " - " 50 psi All Flanged 50 psi = 0 F (0 C) Rated for Vacuum Service
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationInstallation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationAxial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
More informationCh# 11. Rolling Contact Bearings 28/06/1438. Rolling Contact Bearings. Bearing specialist consider matters such as
Ch# 11 Rolling Contact Bearings The terms rolling-contact bearings, antifriction bearings, and rolling bearings are all used to describe the class of bearing in which the main load is transferred through
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationLinear Guideway. Forniture per l Industria Gelmini S.r.l.
Linear Guideway Forniture per l Industria Gelmini S.r.l. Sede Via Cerati, 3/A 43126 Parma Tel. 0521.993844 Fax 0521.291688 Filiale Via Tiziano, 11 46040 Z.I. Guidizzolo (MN) Tel. 0376.847123 Fax 0376.840319
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationRIGHT ANGLE DRIVES TG Series
RIGHT ANGLE DRIVES TG Series Right Angle Fixed Index Drives TG Series The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationInfinit-Indexer Phase Adjuster. HDI Series. Total Motion Control. Harmonic Drive gear
Infinit-Indexer Phase Adjuster HDI Series Total Motion Control Harmonic Drive gear P r e c i s i o n G e a r i n g a n d M o t i o n Control HDI Infinit-Indexer Phase Adjusters HDI s are shaft mounted
More informationBOLT TIGHTENING SOLUTIONS
BOLT TIGHTENING SOLUTIONS We offer a complete and dynamic range of bolting We offer complete and dynamic range of bolting tools including tools including hydraulic bolt tensioners and hydraulic hydraulic
More informationCONTENT. 1. Syllabus 2. Introduction 3. Shaft 4. Coupling. Rigid coupling. Flange coupling. Sleeve (or) muff coupling Split muff coupling
UNIT II 1. Syllabus 2. Introduction 3. Shaft 4. Coupling Rigid coupling CONTENT Flange coupling Protected flange coupling Unprotected flange coupling Marine type flange coupling Sleeve (or) muff coupling
More informationPrecision ball screws
Recirculating ball screws Precision ball screws Thomson Linear Motion. Optimized. Linear Motion. Optimized. The ideal solution often is not found in the fastest, most robust, most precise or even the most
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability
More informationSupport Unit. Support Unit. Structure and Features. Models EK, BK, FK, EF, BF and FF. Ball Screw Peripherals 508-2E 508-2E
Models K, BK, FK, F, BF and FF Uses the Optimal Bearing To ensure the rigidity alance with the Ball Screw, the uses an angular earing (contact angle: 30 ; DF con guration) with a high rigidity and a low
More informationCylindrical roller bearings for large electric motors
Cylindrical roller bearings for large electric motors Cylindrical roller bearings are typically used in belt or gear driven medium- to largesized electric motors, where heavy radial loads prevail. These
More informationChapter 11. Keys, Couplings and Seals. Keys. Parallel Keys
Chapter 11 Keys, Couplings and Seals Material taken for Keys A key is a machinery component that provides a torque transmitting link between two power-transmitting elements. The most common types of keys
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
More informationFO, FL, G Series. Variable Stroke Straight Line Action Clamps Product Overview. FL Series. G Series. FO Series. Type of Mounting: Through hole mount
FO, FL, G Series Variable Stroke Straight Line Action Clamps Product Overview FO Series Type of Mounting: Foot Type of Actuation: Hand wheel or hand lever (one-handed operation) Locking lever and Plunger
More informationTECHNICAL INFORMATION
Radial Roller Bearings Fitting and Mounting Fixed Bearings and Float Bearings Radial and axial loads in bearing units can be transmitted by fixed and floating bearings A fixed bearing is generally used
More informationLoad Cell Accessories
Force Pressure Temperature Switch Load Cell Accessories Force Introduction modules and mounting devices Description The mounting of load cells in an application requires high diligence if the force measuring
More informationFor advanced drive technology DATAFLEX. Torque measuring shaft DATAFLEX
DATAFLEX Torque measuring shaft DATAFLEX 263 The principle: Torque measurement at low cost DATAFLEX measures torques without contact or radio frequency, is maintenance-free and has a high frequency of
More informationKeystone F89C Pneumatic Quarter-Turn Actuator Chemical Industry / Hazardous area
The F89C addresses the specific requirements for automated quarter-turn valves in the chemical industry on top of the reliability and low maintenance cost offered Features Valve connection compatible with
More informationPRECISION COUPLINGS EXACT AND BACKLASH FREE FOR PRECISION SERVO AND STEPPER DRIVE APPLICATIONS.
RELIABLE PRECISE COMPACT PRECISION COUPLINGS EXACT AND BACKLASH FREE FOR PRECISION SERVO AND STEPPER DRIVE APPLICATIONS. RW-COUPLINGS.COM THE COUPLING. WHO WE ARE. ABOVE ALL R+W IS: THE PERFECT COUPLING.
More informationDESIGN OF MACHINE MEMBERS I ASSIGNMENT
SHRI VISHNU ENGINEERING COLLEGE FOR WOMEN DESIGN OF MACHINE MEMBERS I ASSIGNMENT UNIT I 1 a). Draw stress strain diagram for the ductile and brittle material and compare them? show the salient points on
More informationInner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationRINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2
RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 1 Ringfeder Corporation Catalog W-300-1 Shaft-Hub Locking Devices Ringfeder unique frictional, keyless
More informationFT Series Linear Actuators
FT Series Linear Actuators Exlar FT Series force tube actuators use a planetary roller screw mounted inside a telescoping tube mechanism. The follower is attached to the moveable force tube, which then
More informationSolutions for power transmission. MAV-standardisarja.
Solutions for power transmission MAV-standardisarja www.konaflex.fi L O C K I N G A S S E M B L I E S Shrink disc Mini Series Rigid Couplings www.mav.it our company We are an Italian company world renowned
More informationRodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance
Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied
More informationBall splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs
Ball splines can be configured for an endless number of automated operations. Demystifying Ball Spline Specs Place a recirculating-ball bushing on a shaft and what do you get? Frictionless movement of
More information