HARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
|
|
- Annabelle Jacobs
- 6 years ago
- Views:
Transcription
1 HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards: Fittings: STM D-3034, F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Wall Thickness: SDR-35 Installation: STM D WYE GxGxG E SPEIFITION SPIGOT O.D. SIZE STYE Spigot O.D. 4 M M M Fab / M / Fab / M / Fab DOUE WYE GxGxG SIZE PRT # STYE WT (approx.) 4 x M x M x M x M x M x M x x M x Fab x Fab x x M x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab WYE GxSxG SIZE PRT # STYE WT (approx.) 4 x Fab x M x M x Fab x Fab ll lay lengths & weights are approximate and are subject to Style egend: - ssembled from Molded omponents UTION: Vertical risers are not recommended SIZE PRT # STYE WT (approx.) 4 x M x M x M x M x M x M all For Other Sizes, onfigurations & Gasket Materials THE HRRINGTON ORPORTION P.O. OX YNHURG, VIRGINI OHEN PE YNHURG, VIRGINI PHONE: (434) FX: (434) E-MI: sales@harcofittings.com WE:
2 HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT TEE GxGxG MNHOE DPTERS (DOUE E) Note: dapter has a sand coated exterior surface SIZE PRT # STYE WT (approx.) 4 x M x M x M x M x M x M x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab OUPING (w/ Stop) SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab REPIR OUPING (No Stop) (Sleeve) MNHOE DPTERS (SINGE E) Note: dapter has a sand coated exterior surface SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab ll lay lengths & weights are approximate and are subject to Style egend: UTION: Vertical risers are not recommended SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab P SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab all For Other Sizes, onfigurations & Gasket Materials THE HRRINGTON ORPORTION P.O. OX YNHURG, VIRGINI OHEN PE YNHURG, VIRGINI PHONE: (434) FX: (434) E-MI: sales@harcofittings.com WE:
3 HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT 90 END GxG 90 END GxS SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab END GxG SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab END GxS SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab END GxG SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab END GxS SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab ll lay lengths & weights are approximate and are subject to Style egend: SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab all For Other Sizes, onfigurations & Gasket Materials UTION: Vertical risers are not recommended of soil/pipe interaction, dead & live loads, and installation procedures. THE HRRINGTON ORPORTION P.O. OX YNHURG VIRGINI OHEN PE YNHURG VIRGINI PHONE: (434) FX: (434) E-MI: sales@harcofittings.com
4 HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT TEE-WYE GxGxG PERMNENT PUG SIZE PRT # STYE WT (approx.) 4 x M x M x M x M x M x M x x M x x M x Fab x Fab TEE-WYE GxSxG SIZE PRT # STYE WT (approx.) M M M Fab Fab Fab TEMPORRY PUG (made from polyethylene) SIZE PRT # STYE WT (approx.) M M M SDDE WYE SIZE PRT # STYE WT (approx.) 4 x M x M x M x M x M x M (Saddle gasket & SS straps not shown) SIZE PRT # STYE WT (approx.) 6 x M x M x M x M x M x M x M SDDE TEE ll lay lengths & weights are approximate and are subject to Style egend: - ssembled from Molded omponents UTION: Vertical risers are not recommended (Saddle gasket & SS straps not shown) SIZE PRT # STYE WT (approx.) 6 x M x M x M x M x M x M x M all For Other Sizes, onfigurations & Gasket Materials THE HRRINGTON ORPORTION P.O. OX YNHURG VIRGINI OHEN PE YNHURG VIRGINI PHONE: (434) FX: (434) E-MI: sales@harcofittings.com
5 HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT INRESER GxS EN-OUT PUG (RISED) SIZE PRT # STYE WT (approx.) 4 x M x Fab x Fab x Fab x Fab x M x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab x Fab DPTER (Sch 40 x 3034 SxS) SIZE PRT # WT (approx.) EN-OUT PUG (REESSED) SIZE PRT # WT (approx.) EN-OUT DPTER (HU) SIZE PRT # WT (approx.) EN-OUT DPTER (SPIGOT) SIZE PRT # STYE WT (approx.) 4 x M x M DPTER (Sch 40 x 3034 GxS) SIZE PRT # STYE WT (approx.) 4 x M x M NOTES: ll lay lengths & weights are approximate and are subject to Style egend: UTION: Vertical risers are not recommended SIZE PRT # WT (approx.) WY EN-OUT TEE SIZE PRT # STYE WT (approx.) Fab all For Other Sizes, onfigurations & Gasket Materials THE HRRINGTON ORPORTION P.O. OX YNHURG VIRGINI OHEN PE YNHURG VIRGINI PHONE: (434) FX: (434) E-MI: sales@harcofittings.com
HARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards: Fittings: STM F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Installation: STM D-2321 45 WYE (G x G x G) E SPEIFITION
More informationHARCO SDR-35 PVC GASKETED SEWER FITTINGS DESIGN DATA
HRO SDR-35 PV GSKETED SEWER FITTINGS DESIGN DT pplicable Standards Fittings: STM D-3034, F-1336 Materials: STM D-1784 Joints: STM D-3212 Gaskets: STM F-477 Wall Thickness: SDR-35 Installation: STM D-2321
More informationHARCO PVC C-900 GASKETED FITTINGS DESIGN DATA
HRO PV -900 GSKETED FITTINGS DESIGN DT E SPEIFITIONS REPIR OUPING SPIGOT O.D. SIZE STYE Spigot O.D. 4 M 4.3 3.1 6.3 4.80 6 M 4.8 3.5 8.6 6.90 8 M 5.4 4.0 11.0 9.05 10 F 9.0 5.0 13.0 11.10 12 F 9.5 5.5
More informationHARCO DUCTILE IRON IPS GASKETED FITTINGS DESIGN DATA
HRCO DUCTIE IRON IPS GSKETED FITTINGS DESIGN DT pplicable Standards Ductile Iron: STM 536 Grade 65-45 -12, 80-55 - 06 Joints: STM D-3139; WW C153 Gaskets: SR Standard, EPDM & Nitrile vailable STM F-477
More informationSeries G. STI Gasketed Sewer Fittings SDR 35 STI. Injection Molded in Sizes 4 12 Fabricated in Sizes STI Gasketed Sewer SDR 35 G Series
Gasketed Sewer ittings SDR 35 Third party tested and listed by NS, UPC and CSA to meet specifications defined in ASTM D3034, 1336 and CSA B182.2. Gasketed Sewer ittings SDR 35 Gasketed Injection Molded
More informationABOUT NORTH AMERICAN PIPE CORPORATION
Molded PVC Fittings TABLE OF CONTENTS D-SERIES: SOLVENT WELD DWV FITTINGS CERTS: ASTM D2665, F1866, F2135, CSA B181.2, UPC, NSF... 1-5 G-SERIES: GASKETED SDR 35 SEWER FITTINGS CERTS: ASTM D3034, ASTM
More informationHeavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4 12 Fabricated in Sizes 15 36 H With a 34.5% thicker wall than SDR 35 and high impact retention ring. Royal Building Product's PVC Heavy
More informationSincerely, Your Partners at Specified Fittings
N E S Specified Fittings E S 164 W. Smith Rd. Bellingham, WA 98226-9616 Mailing Address PO Box 28157 Bellingham, WA 98228-0157 PVC FITTINGS W PIP: GASKETED SDR81 - SDR32.5 N Mexico 800-429-1705 Toll Free
More informationMATERIAL SPECIFICATIONS AND BID PROPOSAL SHEET
CATEGORY 1: STEEL COUPLINGS 0 ¾" Steel Couplings (Smith-Blair #411-0501-003) 20 1" Steel Couplings (Smith-Blair #411-013201-003) 20 1¼" Steel Couplings (Smith-Blair #411-016601-003) 20 2" Steel Couplings
More informationNEW All Biomass Chimney components are available in matte black. Just add "B" to the end of the part numbers you are ordering.
Type L iomass himney For use with biomass fuels such as pellet, corn, wheat or other grassy and woody plants as specified by appliance manufacturers. Tested and Listed to UL641 Pipe and fittings in 3 and
More informationFlexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationCerta-Set Main Line Piping System
Certa-Set Piping System Pipe (includes Couplings, Gaskets (O-rings) and Spline) Class 125 (yellow) Class 100 Emerald (green) Size SDR OD L BOD Min. Wall (lbs./ft.) Length / feet 25 feet 30 feet 40 feet
More informationPVC WELL CASING & FITTINGS 20 FT. BELL-END /8 SDR21 REDUCING COUPLINGS STEEL WELL CASING & FITTINGS
Pipe Pipe & Well Casing FT. BELL-END 0 7 293 2 2 29 27 23 " SCH0 -/2" SDR7 " SDR2 " SCH0 " SCH0 FT. BELL-END 37 32 30 29 2 " SCH0 -/2" SDR7 -/" DR27. PVC WELL CASING & FITTINGS FT. BELL-END 003 7 -/ SDR2
More informationBASIC FRAME AND COVERS
BSIC FRME ND COVERS ITEM DESCRIPTION VILTER PRT # S 101 Frame 3&4 34086 101 Frame 5&6 34087 101 Frame 7&8 34088 105 Cylinder Cover (no water) 320 Model ll 32648 105 Cylinder Cover (w/water) 320 Model ll
More informationINFRASTRUCTURE DESIGN STANDARDS FIGURES SECTION 2 SANITARY SEWER COLLECTION SYSTEMS
INFRASTRUCTURE DESIGN STANDARDS FIGURES SECTION 2 SANITARY SEWER COLLECTION SYSTEMS 2.1 Sanitary Sewer Design Sheet 2.2 Hydraulic Elements Graph for Circular Sewers 2.3 Standard Servicing Locations for
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2019
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 81.15 244066 3 X 3.5 23 60
More informationIPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
More informationHub & Spigot Pipe & Fittings Price List SV-ABI-2018
Part Size & Approx Pieces List Part Size & Approx List Number Description Wt Per Lift Price Number Description Wt Price Pipe, Single Hub, 3 - ½ Lengths 244059 2 X 3.5 15 102 74.25 244066 3 X 3.5 23 60
More informationDEFINITION OF TERMS USED
PRODUT TLOGUE DEFINITION OF TERMS USED SOE Z RRJ SJ OE PE upv mpv DWV DN PN SDR PE80B PE80 PE100 SN M&F F&F Socketed One End (for Solvent Weld Jointing) Z Joint Rubber Ring Joint Solvent ement Joint oupler
More information$69, $63, $63, $62, Schedule B - PIP & C905 Pipe
Supplier Bid Bond Signed Proposal Form Signed Addendum #1 Subtotal (Items 1-5) Subtotal (Items 1-5) Sales tax @ 8.3% Subtotal (Items 1-56) Subtotal (Items 1-3) Subtotal (Items 1-41) 2015-2016 ELIPS Pipe
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationCORR/GUARD Special Gas Vent
DESIGN MNUL ORR/GURD Special Gas Vent ORR/GURD OMMERIL TLE OF ONTENTS GENERL INFORMTION... 2 ODES & STNDRDS... 2 TEHNIL DT... 3 & 4 SMPLE INSTLLTIONS... 4 & 5 3-5 DIMETER FETURE/ENEFITS... 6 3-5 DIMETER
More informationSeries 36-WW COMBINATION AIR VALVES DATA AND SIZING WASTEWATER SERVICE. (Single Body Style) Installation. Specifications. Purchase Specification
Series -WW COMINTION IR S DT ND SIZING WSTEWTER SERVICE (Single ody Style) Stainless Steel T Trim Standard Stainless Steel Floats Guaranteed Fully Ported s - No Restrictions Engineered For Drip Tight Seal
More informationHAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
More informationPVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS
HRRISON MCHINE & PLSTIC CORPORTION PVC SUPERDUCT PIPE PVC SUPERDUCT FITTINGS For Harrison Fume Exhaust Systems Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH
More informationPipe Supports PS 1. PO Box Highbrook Auckland
1 salesinfo@mechanicalsupport.co.nz PO ox 204336 Highbrook uckland www.mechanicalsupport.co.nz 2 2 Piece lips To Suit Outside Pipe iameter Width x Thickness E2024 HG 8 32 x 1.6 0.04 E2025 HG 11 32 x 1.6
More informationNEW ADVANTAGE 29 SERIES - FULL BORE SDR11/PN16 MITRE BENDS
13 NEW PRICE LIST 1 October 2018 HDPE Long Spigot Fabricated Fittings Advantage 29 Series Mitred Bends Plastic Systems have been supplying bespoke fabricated fittings for major projects for many years.
More informationSDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
More informationCPVC DUCT PIPE & FITTINGS
CPVC DUCT PIPE & FITTINGS For Harrison Fume Exhaust Systems HRRISON MCHINE & PLSTIC CORPORTION Dimensions Catalog 1 HRRISON MCHINE & PLSTIC CORPORTION 11614 ST. RT. 88 GRRETTSVILLE, OH Table of Contents
More informationWater, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
More informationCASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS
CASING SPACERS DESIGNED FOR WATER TER,, SEWER,, OIL & GAS The BWM Company P.O. Box 1 Forest City, North Carolina 2803 Phone: 828.27.030 Toll Free 8 5 SPACER Fax: 828.25.59 www.bwmcompany.com BWM will provide
More informationSincerely, Your Partners at Specified Fittings
N E S E S Washington Location 14 W. Smith Rd. Bellingham, WA 9822-91 30-398-00 30-398-051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 5980-33 40--34 40--181 Fax Mexico PO Box
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationAir Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
More informationCOMPACT REELS FOR BOOSTER HOSE To handle single 3/4" I.D. or 1" I.D. hose.
OMPT RLS OR OOSTR OS To handle single 3/4" I.. or 1" I.. hose. hoose direct crank rewind (removable) or chain and sprocket drive powered by electric, hydraulic or compressed air motor. Power rewind supplied
More informationDYNA-POWER LUBRICATION
DYN-POWER LURICTION D-0-09- Lubrication ccessories July 2007 division of Dyna-Power Engineers,Inc. 5330 Greenwood ve South olland, IL 60473 LURICTION CCESSORIES Table of Contents Grease / Oil Guns 2 Grease
More informationSaf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent
Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange lvd Grand
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationPE SEWER PIPE SYSTEMS AS/NZS 4130, AS/NZS 4129 Gravity sewer applications
APPLICATIONS The PE sewer pipe system is designed specifically for the waste water industry and is best suited to gravity sewer and drainage applications. The pipe is co-extruded with a white internal
More informationMIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
More informationSaf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent
Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange lvd Grand
More informationSwage Tooling. For use with Tube-Mac Pyplok fittings: To join pipe quickly, reliably and without heat. An easier way to connect piping.
For use with Tube-Mac Pyplok fittings: To join pipe quickly, reliably and without heat. M Series (, O and Metric) Up to 9000 PSI Piping Stainless Steel arbon Steel uni n easier way to connect piping. 1
More informationCOOPLOK Grooved Submittal. Material Specifications
SmithCooper International (SCI) COOPLOK Submittal Directions: Enter in the project information below; then print. Project /Job: Date: Engineer/rchitect: Contractor: ddress: Notes: Project Information System:
More informationSmall Diameter N-12 Pipe and Fittings
Small Diameter N-12 Pipe and Fittings THE IN WATER MANAGEMENT TheMOST MostADVANCED AdvancedNAME Name in Drainage SystemsSOLUTIONS SMALL DIAMETER N-12 PIPE AND FITTINGS ADS offers a line of 4-12 (100-300
More informationPIPE OUTSIDE DIAMETER GUIDE
June 7, 2018-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &
More information1-14 Fittings and Accessories
-4 ittings and ccessories entricast Piping Systems NOV iber Glass Systems offers a complete line of fittings manufactured from both epoxy and vinyl ester resins. These fittings and adhesives provide the
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: July 1, 2018 Replaces: LP-DWV-2015 Dated: January 1, 2015 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationCONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
Effective: January 1, 2019 Replaces: LP-DWV-2018 Dated: July 1, 2018 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product...Pages PIPE & FITTINGS No-Hub... 2-8 No-Hub RufWall...9-11 Product...Pages
More informationApproved. Vendor List
APPENDIX A Approved Vendor List Product Manufacturer Valves and Accessories Air Release Valves ARV Enclosures Gate Valves Gate Valves Tapping Valves Insert Valve ARI ARI D 040 2" only ARI D 040 2" only
More informationSUPERSEDES ABS-C0811/AUG.
ABS-C0612/R JUNE 2012 SUPERSEDES ABS-C0811/AUG. 2011 SANITARY TEE REDUCING TEE TEE - Left Side Inlet 600007 1 1/4" 0 62852 60000 5 50 4,800 15.41 600015 1 1/2" 0 62852 60001 2 90 2,880 8.27 600023 2"
More informationTubing. Barb. Sleeve. Attaching the sleeve achieves a larage retaining force. Detaching it allows easy removal of the tube. Electroless nickel plated
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page 9 for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationFiberglass Basins with Ballast Support Flange 24" thru 72" Dia. (.6m thru 1.8m)
Specifications: Fiberglass Basins with Ballast Support Flange 24" thru 72" Dia. (.6m thru 1.8m) Standard: Basin construction is custom molded fi berglass reinforced polyester resin. The wall thickness
More informationCART -AWAY CUBE (NATO) Cart-Away Concrete Systems. Table of Contents. Conveyor Drive Motor See Section Conveyor See Section 1-1
Table of ontents RT -WY art-way oncrete Systems UE (NTO) Parts atalog ustomer Service Hot Line onveyor See Section - onveyor rive Motor See Section 6- ccess Limiting Panels See OPT iverter See Section
More informationFEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.
2" 8" (DN 50 200) OTTOM PORTED 3-WY FLNGED LL VLVES Jamesbury bottom ported 3-way ball valves provide a variety of flow paths not commonly found in other 3-way designs.the basic design is suitable for
More informationANSUL. Vertical and Horizontal Bladder Tanks
NSUL SYSTEM OMPONENTS U.S..G. PPROVL NO. 162.033/14/0 REV. 0 UL EX-3933 7-1-94 Page 2-59 Vertical and Horizontal ladder Tanks PPLITION The nsul bladder tank is one component in a balanced pressure proportioning
More informationDWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
More informationPrecision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
More informationYou get it All. Quality products are not enough. Standardized carton sizes. Large. The benchmark of packaging
Stainless Steel You get it ll. It s not just a quality product - it s a quality system Quality products are not enough. ecause if you want every product to be a quality product, you need a quality system.
More informationABS-C0219 FEB SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS.
ABS-C0219 FEB. 2019 SUPERSEDES ABS-C0717R CSA B181.1 ABS DWV FITTINGS www.bow-group.com DIMENSION ITEM CTN SKID LIST PRICE DIMENSION ITEM CTN SKID LIST PRICE SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS.
ABS-C0717 JULY 2017 SUPERSEDES ABS-C0217 CSA B181.1 ABS DWV FITTINGS www.bow-group.com dimension item Ctn Skid list price dimension item Ctn Skid list price SANITARY TEE (Hub x Hub x Hub) 1 1/4" 600007
More informationPrices subject to change without notice. - International product pricing will vary. ASA-LIT 11/01
NEW PRODUCTS Larger Radius Elbow Weld ittings Nor-Cal offers 45 and 90 Radius Elbows in sizes up to ten inches OD. Radius elbows offer the highest conductance geometry in a tube bend. These elbows are
More informationGAS DISTRIBUTION PRODUCTS METER RISERS
GAS DISTRIBUTION PRODUCTS METER RISERS INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today a leading manufacturer
More informationNOTE: These valves can be identified by rounded screw flanges on the sides of the body.
SURGEON SRUB-UP VVES 4T _ Series Floor and Wallmount Foot Pedal Valves (Pre-1) WMOUNT 1 2 FOORMOUNT NOTE: These valves can be identified by rounded screw flanges on the sides of the body. 4 PEDEST MOUNT
More informationP Series. Price List Effective February 11, 2008
rice List Effective February 11, 2008 VC Solvent Weld Third party tested and listed by NSF, UC and CSA to meet ITEM IN INCHES SIZE NUMBER ART BOX QTY CRATE QTY RICE LIST Solvent Weld Sewer Fittings ITEM
More informationELIPS Pipe Materials Bid Summary August 29, :00am Bid Opening
2013-2014 ELIPS Pipe Materials Bid Summary August 29, 2013 11:00am Bid Opening Supplier Bid Bond Signed Proposal Form Addendum No. 1 Subtotal (Items 1-5) Sales tax @ 7.9% Total Bid Amount Subtotal (Items
More informationTYLER UNION. Quality Waterworks Products. PC-2017, March, REGISTERED FIRMISO 9001:2015. Tyler Union
TYLER UNION Quality Waterworks Products WATERWORKS CATALOG PC-2017, March, 2017 www.tylerunion.com 10014257 U L REGISTERED FIRMISO 9001:2015 CERTIFIED Tyler Union 11910 CR 492 TYLER, TEXAS 75706 (800)
More informationTerms and Conditions of Sale
Terms and Conditions of Sale (1) GENERAL All orders and contracts are subject to acceptance by JCM Industries, Inc. at Nash, Texas. The terms as hereinafter written shall supersede the terms of the customer
More informationGAS MATERIALS - STEEL
GAS MATERIALS - STEEL ITEM # DESCRIPTION EPOXY COATED STEEL PIPE (Per Foor) INCH STEEL PIPE 3 INCH STEEL PIPE 3 4 INCH STEEL PIPE 4 INCH STEEL PIPE INCH WELD FLANGE (SLIP ON) # FLAT FACE INCH WELD FLANGE
More informationStarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
More informationJCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017
JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017 To Our JCM Customers, Enclosed is the updated JCM price list effective September 1, 2017. The increase ranges 4 5% on standard catalog pipe products and % on
More informationSANITIZER PARTS SANITIZER PARTS
SANITIZER PARTS 579 AUTOMATIC FEEDER - MODEL 300, 302, 300-19, 300-29 R171026 R171016 Model No.: 300 302 Description: AUTOMATIC FEEDER SPA HOT TUB FEEDER 1 1 R172008W 3 in. threaded cap, white 2 1 R172009
More informationLIST PRICE. Tyler Cast Iron Soil Pipe & Fittings
LP-DWV-2081 Effective: January 2, 2008 Replaces: LP-DWV-2071 Dated: January 2, 2007 LIST PRICE Tyler Cast Iron Soil Pipe & Fittings Product... Pages PIPE & FITTINGS No-Hub... 2-6 NH RufWall... 7-9 Product...
More informationWILKINSBURG-PENN JOINT WATER AUTHORITY DUCTILE IRON PIPE AND ACCESSORIES BID TABULATIONS CONTRACT NO
WILKINSBURG-PENN JOINT AUTHORITY UNIT # 1- PIPE AND MJ FITTINGS & TAYLOR 1A 6 RON PIPE, CLASS 52 no bid no bid 11.98 12.61 14.23 no bid no bid 13.40 14.93 1B 8 RON PIPE, CLASS 52 16.94 17.83 20.12 17.83
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS Honda Pilot (Without Factory Navigation) B C
INSTLLTION INSTRUTIONS FOR PRT 99-786 PPLITIONS Honda Pilot 00-008 006-008 (Without Factory Navigation) 99-786 KIT FETURES Recessed DIN Pocket ISO Head Unit Provision With Pocket KIT OMPONENTS ) L Radio
More informationNor-Cal Products. where technology takes shape. vacuum products catalog
Nor-al Products where technology takes shape vacuum products catalog s & Fittings Section Two.0 s & Fittings General Information 8. NW s & Fittings 9. ISO s & Fittings 9.3 S s & Fittings 38.4 F s & Fittings
More informationMaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products
World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products
More informationA-dec 2122/2132 Radius System on A-dec 511 Dental Chair I NSTALLATION GUIDE
-dec 2122/2132 Radius System on -dec 511 ental hair I NSTLLTION GUIE Introduction This document contains instructions for installing an -dec Radius delivery system on an -dec Model 511 chair. This guide
More informationNEW STYLE - TANK ADAPTER Socket x Socket Dimensions Also Applicable to 8170E-XXX & 8170V-XXX
Tank Adapters (Bulkhead Fittings) Designed to facilitate connections through tank or bulkhead walls. Available in PVC or CPVC with socket x socket, Socket x thread or S thread, thread x thread or thread
More informationUltra High Pressure Valves, Fittings and Tubing Pressures to 152,000 psi
Ultra High Valves, Fittings and Tubing s to 152,000 psi MXIMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability,
More informationwater management product catalog
water management product catalog INTRODUCTON Our Thinking Continues to Make Waves. From construction and agriculture to residential and recreation, Hancor offers innovative drainage solutions for a variety
More informationINSTALLATION INSTRUCTIONS FOR PART APPLICATIONS. Mazda
INSTLLTION INSTRUTIONS FOR PRT 99-7504 99-7504 KIT FETURES DIN Mount Radio Provision with Pocket ISO Mount Radio Provision with Pocket onus Display Replacement Pocket Retains Factory Display For utomatic
More informationInstallation Fittings
PVC TEES SCH 80 - Fitting only Part No. Code Size L H i.d. PV8T005F 159 000 527 0.50 in. 3.75 3.6 0.85 PV8T007F 159 000 529 0.75 in. 3.75 3.8 1.06 PV8T010F 159 000 531 1.00 in. 4.26 4.0 1.33 PV8T012F 159
More informationRESTRAINED JOINT HP LOK 30" 64" RESTRAINED JOINT NSF WATER & WASTEWATER. Certified to ANSI/NSF 61
2 0 1 6 30" 64" E D I T I O N NSF WATER & WASTEWATER NSF P 2 Table of Contents Restrained Joint Pipe and Fittings 30" 64" 3 Suggested Specifications for Restrained Push-On Joint Pipe and Fittings 4 Joint
More informationNOTE: Please ask James Hardie on for delivery timeframes and terms and conditions. STORMWATER PIPES & FITTINGS
Description James Hardie manufactures an extensive range of fittings which are intended to provide maximum flexibility in the design and installation of stormwater drainage systems. Application As an integral
More informationREPLACEMENT PARTS DIRECTOVALVE AA344AE-2/3 & AA344AEC-2/3. Code 4 A
REPLCEMENT PRTS BLL VLVES SOLENOID VLVES DIRECTOVLVE 344E-2/3 & 344EC-2/3 ITEM STOCK NO. MFG. NO. DESCRIPTION PRICE E. 1 1236 CP20113-PP Cover $ 11.43 2 1237 20122-1-SS Motor #344E 254.58 2 1238 20122-3-SS
More informationPDX7 ASSEMBLIES. PDX7 Assemblies
PX7 SSEMLIES PX7 ssemblies Refer to Parts - PX7 oor ssembly Refer to Parts - PX7 Reflector ssembly Refer to Parts - PX7 Junction ox Refer to Parts - PX7 allast ssembly Revised 7/2/08 PRTS-PX ssemblies
More informationHDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
More informationSTAKE BODY Swing-Away Mount
STKE BODY Swing-way Mount for the Model 8160 Installation Instructions 720713 2006 Little Wonder, Inc. ll Rights Reserved. Table of Contents ssembly Instructions.......................2 Parts & Hardware
More informationHDPE HIGH DENSITY POLYETHYLENE PRODUCTS
HDPE HIGH DENSITY POLYETHYLENE PRODUCTS The Standard of Excellence in the Industry CPS-IPS PECST-SL PECR1 PECR2 PECS- PECS-22 PECSC-1 PECSC-2 CERTIFIED TO NSF/ANSI 1 13 BADGER STREET YORKVILLE, ILLINOIS
More informationELECTRIC HYDRAULIC PUMP
Parts List for: Form No. 03 SPX Corporation 88 th Street Rockford, IL 09-399 US Internet ddress: http://www.powerteam.com Tech. Services: (800) 4-83 Fax: (800) -83 Order Entry: (800) 4-48 Fax: (800) 88-03
More informationZPU MIĘDZYRZECZ Sp. z o. o. PREINSULATED PIPE SYSTEM TO BE USED IN BURIED THERMAL UTILITIES
POLIS STANDARDS PN-EN 253, PN-EN 448, PN-EN 488, PN-EN 13941, PN-EN 14419 TECNICAL CERTIFICATE OF APPROVAL No AT/2005-02-1532; EXPIRES: 17 AUGUST, 2010 No AT/2005-02-1537; EXPIRES: 29 AUGUST, 2010 ISSUED
More informationSURGEON SCRUB-UP VALVES
62 SURGEON SRUB-UP VVES 54T6 _ Series Knee ction Valve (Pre-1993) DEK/W SPOUTS See Page 63 * For Package Quantities check the parts section of the latest Delta ommercial Faucet Price ist ITEM # PRT # DESRIPTION
More informationSECTION 5 AMERICAN. Ductile Iron Mechanical Joint Fittings
ECION 5 AMERICAN Ductile Iron Mechanical Joint Fittings he principal standards covering full body mechanical joint fittings are ANI/AWWA C110/A21.10 and ANI/AWWA C111/A21.11. Compact ductile iron fittings
More informationHP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems)
HP 16 Epoxy Fittings (Filament wound with reinforced epoxy inner liner - Compatible with Red Thread and Green Thread HP 16 piping systems) CHEMICAL INDUSTRIAL Fiber Glass Systems provides a broad range
More informationTEXAS UNITED PIPE INC.
TEXAS UNITED PIPE INC. CERTIFICATIONS SPECIFICATIONS & LOADING CHARTS For PVC Pipe Manufactured by Texas United Pipe Inc. P.O. Box 41067 11627 North Houston Rosslyn Houston, Texas 77241 SALES DEPARTMENT
More informationRed Thread IIA Primary Fittings (Product Data)
Red Thread IIA Primary Fittings (Product Data) FUEL HANDLING 90 and 45 Elbow, Flange and Tee Pipe Size A B C D E F O X 1 X 2 in mm in mm 2 50 3 3/8 86 2 1/4 57 3/4 19 4 3/4 121 3/4 D-4 Holes 19 D-4 Holes
More informationHonda Accord (Excluding dual zone automatic climate controls)
INSTLLTION INSTRUTIONS-PRT 99-7874/99-7874T PPLITIONS Honda ccord 008-00 (Excluding dual zone automatic climate controls) 99-7874/ 99-7874T KIT FETURES Painted To Match Factory Dash 99-7874=harcoal, 99-7874T=Taupe
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More information