Build the legendary PORSCHE RS 2.7. Pack 12

Size: px

Start display at page:

Download "Build the legendary PORSCHE RS 2.7. Pack 12"

Brook Copeland
5 years ago
Views:

1 Build the legendary PORSCHE RS 2.7 Pack 12

engine cover 372 94 The engine cover hinges 376 95 The

rear light 387 98 The windscreen 391 99 The rear

design by Continuo Creative, 39-41 North Road, London

Published in the UK by De Agostini UK Ltd, Battersea

Published in the USA by De Agostini Publishing USA,

All rights reserved 2018 Warning: Not suitable for

2 Build the legendary P O R S C H E RS 2.7 Contents PAGE STAGE 92 The rear shelf The engine cover The engine cover hinges The rear panel The left rear light The right rear light The windscreen The rear window Completing your model 399 Editorial and design by Continuo Creative, North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL All rights reserved 2018 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary from those shown.

3 Step by Step Stage 92: The rear shelf In this stage, you will fit the rear shelf to the Porsche 911 body. YOUR PARTS 92A 92A Rear shelf 92B 92C 92D 92E 92B Rear shelf handles (2) 92C Cover plate 92D Pin 92E Spring 6 BM 2 4mm screws BM DIAGRAM 368

4 PORSCHE 911 CARRERA 92B STEP B Push the handles (92B) into the holes in the rear shelf (92A). 92A 92A 57A STEP 92-2 Place the rear shelf (92A) into the inside of the rear of the body, aligning the holes at the sides. When in place, it should look like the one shown in the inset. 369

5 Step by Step BM STEP 92-3 Secure the shelf to the body with two BM screws. BM 57A STEP 92-4 Slide the spring (92E) onto the pin (92D), and insert the two parts into the groove on the right side of the body. 92E 92D 370

6 PORSCHE 911 CARRERA STEP 92-5 Place the cover plate (92C) over the spring and pin, and secure it in place with two BM screws. BM 92C 57A STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 371

Step by Step Stage 93: The engine cover In this stage,

93E Engine cover ventilation mesh 93F Engine cover

7 Step by Step Stage 93: The engine cover In this stage, you will assemble the engine cover. YOUR PARTS 93A 93B 93C 93D 93E 93F IP OP DIAGRAM 93A Engine cover 93B Frame 93C Engine cover lock 93D Washer 93E Engine cover ventilation mesh 93F Engine cover ventilation grille 3 IP 1.7 3mm screws 2 OP mm screws 6 QM 1.7 3mm screws 372 QM

PORSCHE 911 CARRERA STEP 93-1 Insert the

8 PORSCHE 911 CARRERA STEP 93-1 Insert the engine cover lock (93C) into the central hole in the frame (93B). 93B 93C STEP 93-2 OP Turn the frame over. Then place the washer (93D) into the central hole, and tighten an OP screw through it, securing the lock on the other side. 93D 93B 93B STEP 93-3 Place the frame onto the engine cover (93A), making sure that the five holes in the two pieces are aligned. 93A 373

9 Step by Step QM QM 93B 93A STEP 93-4 Secure the two parts with five QM screws. 93E STEP 93-5 Place the engine cover ventilation mesh (93E) into the recess in the engine cover. 93A 374

10 PORSCHE 911 CARRERA 93F STEP 93-6 Place the grille (93F) over the mesh. Make sure you have it in the correct orientation the 2.7 badge should be positioned on the right-hand side. 93A IP IP STEP 93-7 Secure the grille from the inside using two IP screws. STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 375

YOUR PARTS 94A 94B 94C 94D AM AP BM DIAGRAM 94A Left engine cover hinge 94B Right engine

11 Step by Step Stage 94: The engine cover hinges In this stage, you will fit the hinges to the engine cover, and fit the cover to the body. YOUR PARTS 94A 94B 94C 94D AM AP BM DIAGRAM 94A Left engine cover hinge 94B Right engine cover hinge 94C Strut 94D Hinge fixing plate 3 AM 1.7 3mm screws 3 AP 1.7 4mm screws 3 BM 2 4mm screws 3 PM mm screws 376 PM

PORSCHE 911 CARRERA AM AP STEP 94-1 94C AP AM

strut (94C) along the front edge, on the

Secure the strut with two AM and two AP screws.

hinge (94B), marked R, onto the posts on the

12 PORSCHE 911 CARRERA AM AP STEP C AP AM 93A Retrieve the engine cover and place the strut (94C) along the front edge, on the underside of the cover, as shown. Secure the strut with two AM and two AP screws. BM 94B STEP 94-2 Place the right engine cover hinge (94B), marked R, onto the posts on the right-hand side of the cover. Secure it there with a BM screw. 93A 377

13 Step by Step BM 94A 93A STEP 94-3 Fit the left engine cover hinge (94A) to the left side of the cover in the same way as the right, securing with a BM screw. 93A 94A 57A STEP 94-4 Insert the ends of the hinges into the opening in the rear of the body, then lower the cover into position. 94B 378

PORSCHE 911 CARRERA 94D STEP 94-5 Turn the

Fit the hinge fixing plate (94D) over the ends

secure the hinge fixing plate in position.

14 PORSCHE 911 CARRERA 94D STEP 94-5 Turn the body over, holding the engine cover in place. Fit the hinge fixing plate (94D) over the ends of the hinges, which should be positioned in between the raised tabs, as shown. 57A PM PM STEP 94-6 Use two PM screws to secure the hinge fixing plate in position. STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 379

Step by Step Stage 95: The rear panel In this

Rear number plate 95C Rear bumper L 95D Rear

15 Step by Step Stage 95: The rear panel In this stage, you will fit the rear panel, bumpers and number plate to the body. YOUR PARTS 95A 95B 95C 95D 95A Rear panel 95B Rear number plate 95C Rear bumper L 95D Rear bumper R 3 FM 2 3mm screws 6 IM 2 5mm screws FM IM DIAGRAM 380

PORSCHE 911 CARRERA 95A STEP 95-1 95D Insert

bumper (95D), marked with an R, into the

(95C), marked with an L, to the rear panel in

16 PORSCHE 911 CARRERA 95A STEP D Insert the posts on the inside of the right rear bumper (95D), marked with an R, into the corresponding holes in the rear panel (95A). Secure the bumper with an IM screw. IM 95C 95A STEP 95-2 Fit the left rear bumper (95C), marked with an L, to the rear panel in the same way as the right. Secure with an IM screw. IM STEP A Insert the two pins on the reverse of the number plate (95B) into the two holes in the rear panel. 95B 381

17 Step by Step 95A STEP 95-4 Secure the number plate from inside the rear panel with two FM screws. FM FM 57A 95A STEP 95-5 Insert the two posts on the rear panel into the indicated holes in the body. 382

PORSCHE 911 CARRERA IM IM 95A 57A STEP 95-6

18 PORSCHE 911 CARRERA IM IM 95A 57A STEP 95-6 Secure the rear panel to the body with two IM screws. STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 383

YOUR PARTS 96A 96B BP KM DIAGRAM 96A Left rear bumper 96B Left

19 Step by Step Stage 96: The left rear light In this stage, you will assemble and fit the left rear light. YOUR PARTS 96A 96B BP KM DIAGRAM 96A Left rear bumper 96B Left rear light housing 96C Left rear light lens 96C 3 BP 1.2 3mm screws 2 KM 2.3 4mm screws 384

20 PORSCHE 911 CARRERA 96C STEP 96-1 Place the left rear light lens (96C) onto the left rear light housing (96B), aligning the holes of both parts. 96B STEP 96-2 Secure the lens to the housing with two BP screws. BP BP 96C 96B 385

21 Step by Step KM 96B STEP 96-3 Place the left rear light assembly onto the left rear of the body, aligning the hole in the housing tab with the indicated hole, as shown. Secure with a KM screw. STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 386

PORSCHE 911 CARRERA Stage 97: The right rear light In this stage, you will assemble and fit the right

YOUR PARTS 97A 97B 97C 97D 97H 97E 97F 97G 97A Right rear bumper 97B Right rear light housing 97C

1.7 3mm screws 3 BP 1.2 3mm screws 15 CM 2.3 5mm screws 3 FP 1.

7 4mm screws 97F BP 97B 97D BP 97E 97C GP STEP 97-1 STEP 97-2 Secure the two parts of the oil

22 PORSCHE 911 CARRERA Stage 97: The right rear light In this stage, you will assemble and fit the right rear light, then fit the body onto the chassis. YOUR PARTS 97A 97B 97C 97D 97H 97E 97F 97G 97A Right rear bumper 97B Right rear light housing 97C Right rear light lens 97D Oil reservoir 1 97E Oil reservoir 2 97F Plug 97G Tabs (3) 97H Tape (6) 4 AM 1.7 3mm screws 3 BP 1.2 3mm screws 15 CM 2.3 5mm screws 3 FP 1.5 4mm screws AM BP CM FP GP HP KM MM 2 GP 2 4mm screws 6 HP 2.3 5mm screws 2 KM 2.3 4mm screws 3 MM 1.7 4mm screws 97F BP 97B 97D BP 97E 97C GP STEP 97-1 STEP 97-2 Secure the two parts of the oil reservoir (97D and 97E) with a GP screw. Then insert the plug (97F) into the indicated hole in the oil reservoir. Secure the right rear light lens (97C) to the right rear light housing (97B) with two BP screws. 387

23 Step by Step STEP 97-3 STEP 97-4 Secure the right rear light to the right rear of the body with a KM screw. Locate the red + black rear light cable (40B). Disconnect it from the circuit board. KM 40B 97B 57A STEP 97-5 Run the rear light cable from the front of the body to the rear light holes, as shown. 40B 57A AM AM 97G STEP G Use the three tabs (97G) and three AM screws to secure the cable to the inside of the body. 57A 388

24 PORSCHE 911 CARRERA STEP 97-7 STEP 97-8 Use three pieces of tape (97H) to fix the cable along the rear panel (circled). Place the chassis and body side by side. Connect the loose ends of any of the cables, matching the colours as with the others. STEP A Once all the cables are connected, lower the body onto the chassis. Lower the rear into place first, then make sure to move any cables out of the way when you lower the front. Opening the doors will help to fit the body onto the chassis, ensuring the dashboard fits flush. 19A CM CM STEP Once the body and chassis are in place, secure them together with eight CM screws from the underside of the vehicle. 389 CM CM

Step by Step HP CM STEP 97-11 Remove the

Secure the bumper with two CM and two HP

STAGE COMPLETE Here is how your assembly

25 Step by Step HP CM STEP Remove the exhaust silencer (37D) from the exhaust pipe. Place the left rear bumper (96A) onto to underside of of the body, as shown. Secure the bumper with two CM and two HP screws. 37D 96A CM STEP HP Now place the right rear bumper (97A) onto the underside of the body. Secure with two CM and two HP screws. 97A 57A STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 390

PORSCHE 911 CARRERA Stage 98: The windscreen In this stage,

Mirror 98C Mirror housing 98D Mirror arm 98E Mirror joint

26 PORSCHE 911 CARRERA Stage 98: The windscreen In this stage, you will mount the rear-view mirror to the windscreen, and then fit the screen to the body. YOUR PARTS 98A 98B 98C 98G DIAGRAM 98A Windscreen 98B Mirror 98C Mirror housing 98D Mirror arm 98E Mirror joint 98F Mirror support 98G Tape A (16) 98H Tape B (2) 3 BP 1.2 3mm screws D 98E 98H 98F BP

Then place the mirror joint (98E) into the

27 Step by Step 98F STEP 98-1 Secure the mirror support (98F) and the mirror arm (98D) with a BP screw. 98D BP STEP D Insert the end of the mirror arm (98D) into the hole in the centre of the mirror housing (98C). Then place the mirror joint (98E) into the other side of the hole, and secure the parts with a BP screw. 98E BP 98C STEP B Remove the protective backing from the rear of the mirror (98B). STEP 98-4 Fix the mirror (98B) into the mirror housing, and hold it there for a few seconds to secure it. Then remove the protective cover from the front of the mirror. 98C 98B 392

28 PORSCHE 911 CARRERA 98F 98H STEP 98-5 STEP 98-6 Locate tape B (98H). Peel off one piece and apply it to the mirror support. Remove the protective backing from the tape (98H). 98F STEP 98-7 Fix the mirror support to the black square on the windshield. Hold it in place for a few seconds to secure it. 98A STEP G 98G 393 Apply ten strips of tape A (98G) around the opening in the body for the windscreen, as shown. Remove the protective backing from the strips.

29 Step by Step 98A STEP 98-9 Place the windscreen (98A) into the opening in the body. Gently press into place. STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 394

30 PORSCHE 911 CARRERA Stage 99: The rear window In this stage, you will fit the rear window and oil reservoir to the body. YOUR PARTS 99A 99A Rear window 99B Tape A (8) 99C Tape B (2) 99B 99C DIAGRAM 395

31 Step by Step 99B STEP 99-1 Peel off eight strips of tape A (99B), and apply them around the opening in the body for the rear window. Remove the backing from the strips when you are ready to fit the rear window. 99A STEP 99-2 Place the rear window (99A) into the opening in the body, and gently press it into place. 396

32 PORSCHE 911 CARRERA 99C STEP 99-3 Apply one tape B (99C) centered just above the rear window. MM MM STEP 99-4 Retrieve the oil reservoir from Stage 97, and place it on the inside of the right rear bumper. Insert the pipe into the hole in the oil reservoir. Use two MM screws to secure the reservoir. 97D 97A 33D 397

Step by Step 81C FP STEP 99-5 Open the left

seatbelt with the hole in the side of the seat.

33 Step by Step 81C FP STEP 99-5 Open the left door, and align the hole at the end of the seatbelt with the hole in the side of the seat. Secure it in place with an FP screw. Repeat this with the right seatbelt. STAGE COMPLETE Here is how your assembly should look at the end of this stage. Keep any unused parts, assemblies and tools to one side until they are needed. 398

PORSCHE 911 CARRERA Stage 100: Completing

YOUR PARTS 100D 100A 100B 100C DIAGRAM 100A

34 PORSCHE 911 CARRERA Stage 100: Completing your model To complete the assembly of your Porsche 911, you will fit the windscreen wipers and the boot mat. YOUR PARTS 100D 100A 100B 100C DIAGRAM 100A Right wiper 100B Left wiper 100C Windscreen washer nozzles (2) 100D Boot mat 399

35 Step by Step 100B STEP Insert the left wiper (100B) into the indicated hole in the body, below the windscreen. 400

36 PORSCHE 911 CARRERA 100A STEP Insert the right wiper (100A) into the indicated hole. 100C 100C STEP Insert the two windscreen washer nozzles (100C) into the holes next to the wipers. 401

37 Step by Step 100D STEP Finally, open the boot lid and fit the boot mat (100D). STAGE COMPLETE CONGRATULATIONS! You have now completed the assembly of your 1:8-scale Porsche 911 Carrera RS

Build the legendary PORSCHE RS 2.7. Pack 5

Build the legendary PORSCHE RS 2.7 Pack 5 Build the legendary P O R S C H E RS 2.7 Contents PAGE STAGE 29 Rear disc brake 120 30 Rear wheel 123 31 Rear disc brake 126 32 Rear wheel 129 33 The crankcase