志耕企業股份有限公司 Jaguar Electronic Components Co., Ltd.
|
|
|
- Augusta Hodge
- 5 years ago
- Views:
Transcription
1 Ferrite hip Inductor FI Series For General Use, Ferrite hip Inductor Provide an Effective Solution for Densely Packed PB Designs 案 Features 1.Momolithic inorganic material construction. 2.losed magnetic circuit avoids crosstalk. 3.S.M.T.type. 4.Suitable for flow and reflow soldering. 5.Shapes and dimensions follow E.I.A. spec. 6.Available in various sizes. 7.Excellent solder-ability and heat resistance. 8.High realiability. Applications Noise eliation for I/O lines of notebook Ps, digital TVs and VTRs, Printers, hard disk drives. personal omputers and general consumer and computers Products E.I.A / Dimensions hip size Size A(mm) B(mm) (mm) D(mm) ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±0.3 ing FI 1608 F 47N K Series 2. Dimension: L*W 3. Material: Ferrite 4. : 47N=47Nh 5. Tolerance: S=±0.3nH,J=±5%,K=±10%,M=±20% 11
2 FI 1608 Series D Resistance Rated urrent FI1608F-47N 0.8± FI1608F-68N 0.8± FI1608F-82N 0.8± FI1608F-R10 0.8± FI1608F-R12 0.8± FI1608F-R15 0.8± FI1608F-R18 0.8± FI1608F-R22 0.8± FI1608F-R27 0.8± FI1608F-R33 0.8± FI1608F-R39 0.8± FI1608F-R47 0.8± FI1608F-R56 0.8± FI1608F-R68 0.8± FI1608F-R82 0.8± FI1608F-1R0 0.8± FI1608F-1R2 0.8± FI1608F-1R5 0.8± FI1608F-1R8 0.8± FI1608F-2R2 0.8± FI1608F-2R7 0.8± FI1608F-3R3 0.8± FI1608F-3R9 0.8± FI1608F-4R7 0.8± FI1608F-5R6 0.8± FI1608F-6R8 0.8± FI1608F-8R2 0.8± FI1608F ± FI1608F ± FI1608F ± FI1608F ±
3 FI 2012 Series D Resistance Rated urrent FI2012F-47N 0.85± FI2012F-68N 0.85± FI2012F-82N 0.85± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-R ± FI2012F-1R0 0.85± FI2012F-1R2 0.85± FI2012F-1R5 0.85± FI2012F-1R8 0.85± FI2012F-2R2 0.85± FI2012F-2R7 1.25± FI2012F-3R3 1.25± FI2012F-3R9 1.25± FI2012F-4R7 1.25± FI2012F-5R6 1.25± FI2012F-6R8 1.25± FI2012F-8R2 1.25± FI2012F ± FI2012F ± FI2012F ± FI2012F ± FI2012F ± FI2012F ± FI2012F ±
4 FI 2520 Series D Resistance Rated urrent FI2520F-R10 1.6± FI2520F-R12 1.6± FI2520F-R15 1.6± FI2520F-R18 1.6± FI2520F-R22 1.6± FI2520F-R27 1.6± FI2520F-R33 1.6± FI2520F-R39 1.6± FI2520F-R47 1.6± FI2520F-R56 1.6± FI2520F-R68 1.6± FI2520F-R82 1.6± FI2520F-1R0 1.6± FI2520F-1R2 1.6± FI2520F-1R5 1.6± FI2520F-1R8 1.6± FI2520F-2R2 1.6± FI2520F-2R7 1.6± FI2520F-3R3 1.6± FI2520F-3R9 1.6± FI2520F-4R7 1.6± FI2520F-5R6 1.6± FI2520F-6R8 1.6± FI2520F-8R2 1.6± FI2520F ± FI2520F ± FI2520F ± FI2520F ± FI2520F ± FI2520F ± FI2520F ±
5 FI 3216 Series D Resistance Rated urrent FI3216F-47N 1.1± FI3216F-68N 1.1± FI3216F-R10 1.1± FI3216F-R12 1.1± FI3216F-R15 1.1± FI3216F-R18 1.1± FI3216F-R22 1.1± FI3216F-R27 1.1± FI3216F-R33 1.1± FI3216F-R39 1.1± FI3216F-R47 1.1± FI3216F-R56 1.1± FI3216F-R68 1.1± FI3216F-R82 1.1± FI3216F-1R0 1.1± FI3216F-1R2 1.1± FI3216F-1R5 1.1± FI3216F-1R8 1.1± FI3216F-2R2 1.1± FI3216F-2R7 1.1± FI3216F-3R3 1.1± FI3216F-3R9 1.1± FI3216F-4R7 1.1± FI3216F-5R6 1.1± FI3216F-6R8 1.1± FI3216F-8R2 1.1± FI3216F ± FI3216F ± FI3216F ± FI3216F ± FI3216F ± FI3216F ± FI3216F ±
6 FI 3225 Series D Resistance Rated urrent FI3225F-R12 1.3± FI3225F-R15 1.3± FI3225F-R18 1.3± FI3225F-R22 1.3± FI3225F-R27 1.3± FI3225F-R33 1.3± FI3225F-R39 1.3± FI3225F-R47 1.3± FI3225F-R56 1.3± FI3225F-R68 1.3± FI3225F-R82 1.3± FI3225F-1R0 1.3± FI3225F-1R2 1.3± FI3225F-1R5 1.3± FI3225F-1R8 1.3± FI3225F-2R2 1.3± FI3225F-2R7 1.3± FI3225F-3R3 1.3± FI3225F-3R9 1.3± FI3225F-4R7 1.3± FI3225F-5R6 1.3± FI3225F-6R8 1.3± FI3225F-8R2 1.3± FI3225F ± FI3225F ± FI3225F ± FI3225F ± FI3225F ± FI3225F ± FI3225F ±
7 FI 4532 Series D Resistance Rated urrent FI4532F-R10 1.5± FI4532F-R12 1.5± FI4532F-R15 1.5± FI4532F-R18 1.5± FI4532F-R22 1.5± FI4532F-R27 1.5± FI4532F-R33 1.5± FI4532F-R39 1.5± FI4532F-R47 1.5± FI4532F-R56 1.5± FI4532F-R68 1.5± FI4532F-R82 1.5± FI4532F-1R0 1.5± FI4532F-1R2 1.5± FI4532F-1R5 1.5± FI4532F-1R8 1.5± FI4532F-2R2 1.5± FI4532F-2R7 1.5± FI4532F-3R3 1.5± FI4532F-3R9 1.5± FI4532F-4R7 1.5± FI4532F-5R6 1.5± FI4532F-6R8 1.5± FI4532F-8R2 1.5± FI4532F ± FI4532F ± FI4532F ± FI4532F ± FI4532F ± FI4532F ± FI4532F ±
Multilayer Chip Beads / CB Series
.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead and also support lead-free soldering..applications:
Multilayer Chip Beads / CP TYPE(Large Current)
Multilayer Chip Beads / CP TYPE(Large Current).Features: 1.Closed magnetic circuit structure allows high density mounting while preventing crosstalk. 2.Extremely high reliability due to entirely monolithic
P7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
Multilayer Suppressors and Inductors. Technical Note
Multilayer Suppressors and Inductors Technical Note A Y A G E O C O M P A N Y Multilayer Suppressors and Inductors Contents Introduction 3 Multilayer Suppressors Features 4 Applications 5 Type Number structure
Current Sensing Resistor Metal Foil Type >SMF Series
Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power
Approval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
Multilayer Ferrite Chip Inductor
Features -Closed magnetic circuit avoids crosstalk -Suitable for high density installation and re-flow soldering -Sizes 0603 / 0805 / 1206 Construction Applications -Personal Computers -Portable Equipment
SMD Power Inductor-VLH
SMD Power Inductor-VLH Applications Pagers, Cordless phone. High frequency communication products. Personal computers. Disk drives and computer peripherals. power supply circuits. and rated current ranges
Prevention of electromagnetic interference to signals on the secondary side of electronic equiepmet.
Multilayer Ferrite Chip Inductors - CKFI Features 1. Monolithic structure for high reliability compact size inductor possible. 2. No cross coupling due to magnetic shield. 3. Perfect shape for mounting
Approval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
Shielded SMD Power Inductor
PCS62B / 64B PCS73 / 74 Features 1.5 -High power, High saturation inductors -With magnetically shielded against radiation 5.0 -Directly connected electrode on ferrite core -Highly accurate dimensions for
Surface Mount Fuses 0603Size> Fast Acting > S0603-F Series
Page:1 of 6 General Fast Acting 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
B Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
Power Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
Surface Mount Fuses 0603Size> Slow Blow> S0603-S-5.0A
Page: 1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
Surface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Revision:F Page:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity
WLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
P7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
WLFI1608 Ferrite Chip Inductors
WLFI1608 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI1608 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
WLFI2012 Ferrite Chip Inductors
WLFI2012 Ferrite Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLFI2012 Series_V1.0 July. 2015 FEATURES 1. General purpose chip ferrite power inductor
INPAQ Global RF/Component Solutions
WIP252012Q ZF Series Specification Product Name Series Power Inductor WIP252012Q ZF Series Size EIAJ 2520 WIP252012Q ZF Series Engineering Specification 1. Feature This specification applies Low Profile
Chip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer
Multi-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
Molded Chip Wirewound Inductors
FEATURES EIA SIZES A (1210), B (1812), C (1008) AND D (0805) EXCELLENT HIGH Q AND HIGH CHARACTERISTICS BOTH FLOW AND REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC
Chip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
Power Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
CONTENT Ferrites for cable assembly
www.schmid-m.com EMC & Inductors CONTENT Ferrites for cable assembly Round cable snap ferrites SMLF Flat Ferrite with Clip SRPS Flat Ferrite Cores SRP Toroidal Cores ST Axial Ferrite Beads SRH Ferrite
Power Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812
Wire Wound Chip Inductor (Ferrite) Standard LN1210 LN1812 Wire Wound Chip Inductor (Ferrite) - Standard Features Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate
SMD High Frequency Inductors. Characteristics Electrical Q min 100 Hz. Q Typical 800 MHz H1N2S
Type 3671 Series Key Features Frequency to 10GHz Four sizes available Supplied on tape Available via distribution Applications Cellular phones WLAN High Speed Communication Devices TE Connectivity is pleased
Product Code Size Number of Type Characteristics Nominal Impedance Form Suffix Terminals. High Impedance Type. Low DCR Type
Type: /P N Features urst/radiation noise fi ltering for audio circuits The optimally magnetic-coupled ferrite beads allow for the fi ltering of both common and normal mode noises The strong multi-layer
FP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR1307 Series
SMD Power Inductor SR0602/SR0603/SR0604 SR0805/SR1006/SR1011/SR17 Series CONFIGURATION & DIMENSIONS(m/m) 101 A A FEATURES Excellent solderability and high heat resistance Excellent terminal strength construction
RJ45 SINGLE PORT 100/1000/2.5G/5G BASE-T MAGNETICS
SERIES DESCRIPTION The series of RJ45 jacks with internal magnetics supports a wide range of configurations in 10/100Base-T, 1000Base-T, 2.5GBase-T and 5GBase-T applications. This series offers the ability
CPTC Thermistor:TPM-P Type
CPTC Thermistor:TPM-P Type Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition:
High Current Inductors / PIL Series
.Features: 1. Surface mount inductor with high current rating. 2. Low resistance to keep power loss minimum..applications: Excellent for power line DC-DC conversion applications used in hard disk, notebook
Inductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded CLF series Type: CLF7045 (6.9x7.2 mm) CLF0040 (9.7x0.0 mm) Issue date: September 202 (/4) Inductors for Power Circuits Wound/STD Magnetic Shielded
POWER INDUCTOR PIP. AiT Semiconductor Inc. FEATURE APPLICATION ORDERING INFORMATION
FEATURE 1. Low profile and Compact Size 2. Low DC resistance 3. Open magnetic circuit construction APPLICATION 3011 2810-R 3015B 10040 1. LCD panels, DC/DC Converters 2. Digital camera, PDA 3. Portable
SMD Inductors Flat Top Air Core - AM Series
/ 射频电感器 Chip Beads / 贴片磁珠 Multilayer Chip Beads Inductors for High Current - MA Series ------------------------ 1 Multilayer Inductor - MB Series -------------------------------------------------------------------
Multi-Phase Power Inductors CL0904 Series
Multi-Phase Power Inductors CL0904 Series HALOGEN HF FREE Pb Applications For exclusive use with Volterra VPR-Devices Environmental Data Storage temperature range: -40 C to +125 C Operating temperature
INDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
Automotive Grade Surface-Mount Fuses
Automotive Grade Surface-Mount Fuses AEC-Q200 qualified TS6949 certified Anti-sulfur construction SolidMatrix Platform, QF series AirMatrix Platform, QA series www.aemcomponents.com / www.aemchina.com
SMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
Japan. ND (Size 2012) (Size 1608) Non winding (RF, 1E) and wire wound type chip inductors for automatic mounting and high-density mounting
Chip Inductors Japan Series: Chip Type: RF, NC, FA, PE, EA RE, ND, NA, FC, FB, SA, PC, PA, RF (Size 5) 1E (Size 1608) ND (Size 2012) 1C (Size 2520) 1A (Size 3225) FB (Size 4532) Non winding (RF, 1E) and
Content (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
Wire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
Japan China. Recommended Applications AV equipment, Wireless communication equipment and various general electronic equipment.
4. High Power Type PF, PC, PA, PB Japan China Features Low DCR and large current, suitable for power circuit. Wire wound and resin molded chip inductor. (PC, PA, PB type) Non wound structure using unique
Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors
T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance
0.175 mm pitch ultra-low profile
0.175 mm pitch ultra-low profile FP LIF back-lock onnector Upper ontact Type FF27 OUTLINE The FF27 series ultra-low profile FP LIF connector has a market leading height of only 0.66mm with a depth of just
SLF Series. SMD Power Inductors APPLICATIONS OUTLINE PRODUCT IDENTIFICATION FEATURES SLF - -
Yageo corporation INUCTORS / BEAS SLF Series SM Power Inductors APPLICATIONS Portable telephones, computers, hard disk drives and other electronic equipment. OUTLINE SLF series is designed for low profile
INPAQ. Specification. MCB & MHC W Series. Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516
MCB & MHC W Series Specification Product Name Multilayer Chip Ferrite Bead Series MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 RoHS Pb Chip Ferrite Bead for Automotive Engineering Spec. Qualified
Multi-Phase Power Inductors CPL, CPLA & CPLE Series
Multi-Phase Power Inductors CPL, CPLA & CPLE Series HALOGEN HF FREE Pb SMD Device Description Halogen Free CPLA Series features acoustic noise dampening properties CPLE Series features optimized core material
TDK Equivalent Circuit Model Library
Automotive Grade ( Inductors for Standard Circuits ) / MLF series (1/7) MLF1005VR10JTD25 0.1 450 0.338 0.3300 MLF1005VR10KTD25 0.1 450 0.338 0.3300 MLF1005VR12JTD25 0.12 520 0.382 0.3300 MLF1005VR12KTD25
FC Type 2520 (1008) Dimensions in mm (not to scale) Marking Recommended Land Pattern in mm (not to scale) ± ± ± ±0.1
3. General Use FC, F, F Features General use wire wound, resin molded chip inductor. Capable of being Re-fl ow or fl ow soldered. ide line-up from 2520 to 4532 case sizes. Good for mounting. RoHS compliant
Wire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 1.These revolutionary, highly reliable wound chip inductors for automatic mounting,
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
Power Inductor SMT Type
SMD SERIES WIRE WOUND SMD CHIP INDUCTORS Applications :.DSC, DVC products..pcs.hard disk drives and computer peripherals..telecommunications devices..tv circuits..test equipment. Shape and Dimensions (Dimensions
Recommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
2R2. 4 Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
AXIAL LEAD TYPE INDUCTOR
KH CODE NUMBER COMPOSITION AL 0410-331 K T 1 2 3 4 5 1 Product name : Axial Leaded Inductor 2 Dimension ( Diameter Height ) 0307: 3.0mm 7.0 mm 0410: 4.2mm 9.8 mm 3 Inductance 4R7: 4.7 μh, 331: 330 μh,
High Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
Company Overview. History. AEM s products and services include the following:
Company Overview AEM, is a global manufacturer redefining the standards of quality and value in the electronic components industry with its leading edge technologies. History AEM, was founded in 986. Phenomenal
SCDS Series. Shielded SMD Power Inductors. Features
YAGEO CORPORATION SMD INDUCTOR / BEADS Series Shielded SMD Power Inductors Applications Power Supply for VTRs OA Equipment LCD Televisions Notebook PCs Portable Communication Equipment DC / DC Converters,
(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
Wirewound Chip Inductors
EATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) and J (0603) RoHS Compliant includes all homogeneous materials HIGH CURRENT AND LOW *See Part Number System for Details RELOW SOLDERING APPLICABLE
TYPE A B C D A B C BPSC ± ± BPSC ± ±
SMD Shielded Power Inductors Series Series Features RoHS, Halogen Free and REACH Compliance Magnetic shielded Various package size and wide inductance range Applications AP Routers STBs LCD TVs and monitors
SMD Power Inductors. Type 3624 Series. Type 3624 Series. Electrical Characteristics A Series. Environmental Characteristics A Series
The 3624 series unique design allows for a range of products which give not only a high current rating, but minimizes the board space required for this product. Tyco Sigma quality, matched with reliability
Coiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
Thin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
Coiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
SELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
High Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
SPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
FIXED INDUCTORS FEATURES
FEATURES Extremely reliable inductors that are ideal for automatic insertion. Highly efficient automated production processes can provide high quality inductors in large volumes. Wide selection of configurations
WIRE WOUND CHIP INDUCTORS FEATURES APPLICATIONS ORDERING CODE DIMENSIONS
Wire wound chip inductor is a perfect combine by means of combining hing precision coil framework with superb wound technology. Comparable with traditional inductor, it is improved technology, reduced
SELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
2R2. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
Wire Wound Chip Inductors Ferrite SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current
Surface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General
Page: 1/ 6 General Fastacting 3.10mm 1.55mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -55 ~125 operating temperature Excellent environmental integrity RoHS
Wire Wound Chip Inductor (Ferrite)-NL Series
Wire Wound Chip Inductor (Ferrite)-NL Series Construction Molding Type 1 2 3 4 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire Open Type 4 1 3 2 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2
Library Expert Through-hole Families
Non-polarized Axial Diameter Leaded Component Library Expert Through-hole Families Resistor (RESAD) Capacitor Non-polarized (CAPAD) Fuse Axial Diameter (FUSAD) Inductor Axial Diameter (INDAD) Non-polarized
(TCRB) Radial High Rated Current Choke
Version: December 22, 2017 Electronics Tech. (TCRB) Radial High Rated Current Choke Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry
RoHS. 1 Ferrite core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet wire 4 UV Glue
FEATURES Very strong solderability by flow soldering, soldering iron or wave soldering Highly accurate dimensions, can be mounted automatically Terminals are highly resistant to pull forces Highly resistant
Low-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
SMD Wire Wound Chip Inductors / NLF TYPE(For Signal Line)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics. 3.Low DC resistance design is ideal for low loss. 4.RoHS compliant..applications: 1.Personal
CCFL Transformers Cold cathode fluorescent lamp inverter transformers
Supersedes March 2007 Cold cathode fluorescent lamp inverter transformers Applications CCFL power supplies Environmental data Storage temperature range: -40 C to +85 C Operating ambient temperature range:
C310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses
Technical Data 10405 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop,
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)
FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV APPLICATIONS Smartphone Tablet PC Wireless module e-book LEAD-FREE COMPATI- BLE COMPONENT Resin Solder
SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF RoHS ISSUED CHECKED CHECKED CHECKED APPROVED.
Page 1 of 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC BAND PASS FILTER PART NUMBER: CF-22500024 RoHS 12/7/09 Added Attenuation and graph 9/1/17 Added Recommended Solder Pattern ISSUED CHECKED CHECKED
VLS-E series. Inductors for Power Circuits. Wound Ferrite
May 2013 Inductors for Power Circuits Wound Ferrite VLS-E series VLS201610E VLS201612E VLS2010E VLS2012E VLS252008E VLS252010E VLS252012E VLS252015E VLS3010E VLS3012E VLS3015E VLS4012E (1/52) REMINDERS
(TCRC) Power Choke Coil Inductors. Token Electronics Industry Co., Ltd. Version: July 31, Web:
Version: July 31, 2017 (TCRC) Power Choke Coil Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei
Overview. Benefits. Applications. KEMET Organic Capacitor (KO-CAP ) T52X/T530 Polymer Electrolytic Capacitors
T52X/T530 Polymer Electrolytic Capacitors Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low and improved capacitance
0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
Shielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
HIGH VOLTAGE THICK FILM CHIP FIXED RESISTOR
HIGH VOLTGE THIK FILM HIP FIXED RESISTOR 3000V Max Operating voltage 3000V Stable electrical capability, high reliability Superior mechanical and frequency characteristics ROHS ompliant with RoHS directive
Coil type EMI Filters
oil type MI Filters (Digital Noise Filters) Type: K 8 case size, 6 A rated current (KA) and A rated current (K) High SD suppression with varistor and included coils asily discernible part number written
Surface Mount Shielded Power Inductors
SCRB Series ( ------SCRB Applications( : Features( : 1, To be high saturation for surface mounting.( 2, Surface mount inductor with high current rating.( 3.Low resistance to keep power loss minimum.( 4,