Automotive Grade Surface-Mount Fuses

Transcription

1 Automotive Grade Surface-Mount Fuses AEC-Q200 qualified TS6949 certified Anti-sulfur construction SolidMatrix Platform, QF series AirMatrix Platform, QA series /

2 Revision of December 206 Automotive Surface Mount Fuses Features: AEM Components AEC-Q200 qualified and ISO TS6949 certificated fuses are setting a new standard for reliable performance in demanding automotive applications. Choose from AirMatrix wire-in-air fuses and SolidMatrix solid body fuses for optimum performance under the hood or in the cabin. AirMatrix Platform QA Series Excellent inrush current withstanding capability Fiberglass enforced epoxy fuse body Copper or copper alloy composite fuse link Copper termination with nickel and tin plating Operating temperature range: -55 to +25 (with derating) SolidMatrix Platform QF Series Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes Operating temperature range: -55 to +50 (with derating) Applications: Communications & Networks Battery Management Systems Infotainment Systems Under-the-hood Applications Quick Index: Series Size Current Rating (A) Voltage Rating Page 0.5, 0.63, 0.75,.0,.5, VAC/25VDC QA24F 24 QA206F 206 QF206F 206 QF0603F 0603 QF206H , 3.0, 3.5, 3.5, 4.0, 5.0, 6.3, 7.0, 8.0,.0 25VDC 2.0, 5.0, VDC.5,.6, 2.0, 2.5, 3.0, 3.5, 3.5, VDC 5.0, 6.3, 7.0, 8.0,.0, 2.0, VDC 0.5, 0.75,.0,.5,.75, VDC 2.5, 3.0, 4.0, 5.0, 6.0, 7.0, VDC 0.5, 0.75,.0,.5 63VDC 2.0, 2.5, 3.0, 3.5, 4.0, VDC VDC.0,.5, VDC 2.5, 3.0, 3.5, 4.0, 4.5, VDC 6.0, 7.0, VDC QF0603H ,.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, VDC 9 Website: &

3 % De-rating % De-rating Revision of December 206 Automotive Surface Mount Fuses Product Identification: Q A 206 F 2A00 T () (2) (3) (4) (5) (6) () Product type code: Q- Automotive fuse (2) Product code: A-AirMatrix Chip Fuse, F-SolidMatrix Chip Fuse (3) Dimension code: L x W (inch) The first two digits - L (length) The last two digits - W (width) (4) Characteristic code: F-fast acting, H-Slow Blow (5) Current rating code: 2A00-2.0A (6) Package code: T Tape and Reel B Bulk Recommended Land Pattern: 0.8 ( (8.60) 24 Size Inch (mm) (.50) 0.73 (4.40) 206 Size 0.07 (.80) Inch (mm) 0.03 (0.80) (2.20) 0603 Size (.00) Inch (mm) Fuse Selection and Temperature De-rating Guideline: The ambient temperature affects the current carrying capacity of fuses. When a fuse is operating at a temperature higher than 25 C, the fuse shall be de-rated. To select a fuse from the catalog, the following rule may be followed: Catalog Fuse Current Rating = Nominal Operating Current / 0.75 / % De-rating at the maximum operating temperature. Example: At maximum operating temperature of 65 C, % De-rating is 90%. The nominal operating current is 4 A. The current rating for fuse selected from the catalog shall be: 4 / 0.75 / 90% = 5.9 or 6 A. Specifications and descriptions in this literature are as accurate as known at the time of publish, but are subject to change without notice. Effect of Ambient Temperature on Current Rating of QA Series Effect of Ambient Temperature on Current Rating of QF Series Maximum Operating Temperature ( o C) Maximum Operating Temperature ( o C) 2 Website: &

4 Revision of December 206 Automotive Surface Mount Fuses Soldering Temperature Profile: * Recommended Temperature Profile for Reflow Soldering Profile Feature Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Liquidous temperature(t L ) Time(t L ) maintained above T L Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C/second max. 27 C 60~50 seconds Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) Time 25 C to peak temperature 30 seconds * 6 C/second max. 8 minutes max. * Recommended Temperature Profile for Wave Soldering * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Notice: Wave Soldering is suitable for 206 and 0603 size. Packaging: Chip Size Parts on 7 inch (78 mm) Reel 0603 (608) 4, (326) (For QA206F Series) 3, (326) 3, ,000 Website: & 3

5 Revision of December 206 AirMatrix Automotive Surface Mount Fuses QA24F Series Agency Approval: Agency UL File NO. E Shape and Dimensions: Clearing Time Characteristics: Clearing time at 25 C % of current rating Min. Max. 0% 4 hours 200% ( A) 0.0 second 5 seconds 200% 0.0 second 20 seconds Unit Inch mm L ± ± 0.5 W ± ± 0.5 T ± ± 0.20 B ± ± 0.38 Ordering Information: Part Number Current Rating (A) Voltage Rating Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QA24FA500T C QA24FA630T S QA24FA750T D QA24FA00T VAC 25VDC E QA24FA25T F QA24FA50T A: G QA24F2A00T VAC I QA24F2A50T A: J QA24F3A00T VDC 32VDC K QA24F3A5T V QA24F3A50T A: 65VDC L QA24F4A00T VDC 32VDC M QA24F5A00T A: N QA24F6A30T VDC 32VDC O QA24F7A00T P QA24F8A00T R QA24FA0T Q QA24F2A0T X QA24F5A0T VDC Y QA24F20A0T Z. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Blue Marking Character Code. 4 Website: &

6 Clearing Time (s) 0.50 A 0.63 A 0.75 A.0 A.25 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 3.5 A 4.0 A 5.0 A 6.3 A 7.0 A 8.0 A.0 A 2.0 A 5.0 A 20.0 A Revision of December 206 AirMatrix Automotive Surface Mount Fuses QA24F Series Average Pre-arcing Time Curves: Current (A) Website: & 5

7 I 2 t (A 2 s) Revision of December 206 AirMatrix Automotive Surface Mount Fuses QA24F Series Average I 2 t vs. t Curves: A 5.0 A 2.0 A.0 A 8.0 A 7.0 A 6.3 A 5.0 A 4.0 A 3.5 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.25 A.0 A 0.75 A 0.63 A 0.5 A Time (s) 6 Website: &

8 Revision of December 206 AirMatrix Automotive Surface Mount Fuses QA206F Series Agency Approval: Agency UL File NO. E Shape and Dimensions: Unit Inch mm Clearing Time Characteristics: Clearing time at 25 C % of current rating Min. Max. 0% 4 hours 250% 5 seconds L 0.26 ± ± 0.20 W / / -0. T ± ± 0.5 B ± ± 0.30 Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QA206FA50T G QA206FA60T T QA206F2A00T I QA206F2A50T VDC J QA206F3A00T K QA206F3A5T V QA206F3A50T L QA206F4A00T M QA206F5A00T N QA206F6A30T O QA206F7A00T P QA206F8A00T VDC R QA206FA0T Q QA206F2A0T X QA206F5A0T Y. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Blue Marking Character Code. Website: & 7

9 Pre-arcing Time (s).50 A.60 A 2.00 A 2.50 A 3.00 A 3.5 A 3.50 A 4.00 A 5.00 A 6.30 A 7.00 A 8.00 A.0 A 2.0 A 5.0 A Revision of December 206 AirMatrix Automotive Surface Mount Fuses QA206F Series Average Pre-arcing Time Curves: Current (A) 8 Website: &

10 I 2 t (A 2 s) Revision of December 206 AirMatrix Automotive Surface Mount Fuses QA206F Series Average I 2 t vs. t Curves: A 2.0 A.0 A 8.00 A 7.00 A 6.30 A 5.00 A 4.00 A 3.50 A 3.5 A 3.00 A 2.50 A 2.00 A.60 A.50 A Time (s) Website: & 9

11 Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF206F Series Agency Approval: Agency UL File NO. E Shape and Dimensions: Unit Inch mm W L Clearing Time Characteristics: Clearing time at 25 C % of current rating Min. Max. 0% 4 hours 250% 5 seconds L 0.26 ± ± 0.20 W ± ± 0.20 T ± ± 0.20 B ± ± 0.25 B T 400% 0.05 second Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF206FA500T C QF206FA750T D QF206FA00T VDC E QF206FA50T G QF206FA75T H QF206F2A00T I QF206F2A50T J 32VDC QF206F3A00T K QF206F4A00T M 32VDC QF206F5A00T N QF206F6A00T 6.0 QF206F7A00T VDC Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Black Marking Character Code QF206F8A00T = Website: &

12 Pre-arcing Time(s) 0.5 A 0.75 A.0 A.5 A.75 A 2.0 A 2.5 A 3.0 A 4.0 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF206F Series Average Pre-arcing Time Curves: Current(A) Website: &

13 I²t (A²S) Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF206F Series Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.0 A 3.0 A 2.5 A 2.0 A.75 A.5 A.0 A 0.75 A 0.5 A Time(s) 2 Website: &

14 Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF0603F Series Agency Approval: Agency UL File NO. E Shape and Dimensions: Unit Inch mm W L Clearing Time Characteristics: Clearing time at 25 C % of current rating Min. Max. 0% 4 hours 250% 5 seconds L ± ± 0.5 W 0.03 ± ± 0.5 T 0.03 ± ± 0.5 B 0.04 ± ± 0.5 B T 400% 0.05 second Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF0603FA500T C QF0603FA750T VDC D QF0603FA00T E QF0603FA50T G QF0603F2A00T 2.0 QF0603F3A00T K QF0603F3A50T VDC L. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Black Marking Character Code I QF0603F2A50T J QF0603F4A00T M QF0603F5A00T N QF0603F6A00T VDC O Website: & 3

15 Pre-arcing Time(S) 0.5 A 0.75 A.0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 5.0 A 6.0 A Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF0603F Series Average Pre-arcing Time Curves: Current(A) 4 Website: &

16 I 2 t(a 2 s) Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF0603F Series Average I 2 t vs. t Curves: A 5.0 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A 0.75 A 0.5 A Time(S) Website: & 5

17 Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF206H Series Agency Approval: Agency UL File NO. E Shape and Dimensions: Unit Inch mm W L Clearing Time Characteristics: L 0.26 ± ± 0.20 Clearing time at 25 C % of current rating Min. Max. 0% 4 hours W ± ± 0.20 T ± ± 0.20 B ± ± 0.25 B T 200% second 60 seconds Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF206HA00T E QF206HA50T VDC G QF206H2A00T I QF206H2A50T J QF206H3A00T K QF206H3A50T VDC L QF206H4A00T M QF206H4A50T T QF206H5A00T N QF206H6A00T O QF206H7A00T VDC P QF206H8A00T R. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 00% of current rating. 3. Green Marking Character Code. 6 Website: &

18 Pre-arcing Time(s).0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF206H Series Average Pre-arcing Time Curves: Current(A) Website: & 7

19 Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF206H Series Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A I²t (A²S) Time(s) 8 Website: &

20 Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF0603H Series Agency Approval: Agency UL File NO. E Shape and Dimensions: Unit Inch mm W L Clearing Time Characteristics: Clearing time at 25 C % of current rating Min. Max. 0% 4 hours 200% second 60 seconds L ± ± 0.5 W 0.03 ± ± 0.5 T 0.03 ± ± 0.5 B 0.04 ± ± 0.5 B T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF0603HA00T E QF0603HA50T G QF0603H2A00T I QF0603H2A50T J QF0603H3A00T VDC K QF0603H3A50T L QF0603H4A00T M QF0603H4A50T T QF0603H5A00T N QF0603H6A00T O QF0603H7A00T VDC P QF0603H8A00T R. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 00% of current rating. 3. Green Marking Character Code. Website: & 9

21 Pre-arcing Time(S).0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF0603H Series Average I 2 t vs. t Curves: Current(A) 20 Website: &

22 I 2 t(a 2 s) Revision of December 206 SolidMatrix Automotive Surface Mount Fuses QF0603H Series Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A Time(S) Website: & 2

23 Company Overview AEM, a global manufacturer of electronic components, was founded to redefine the standards of quality and value in the industry with continuous innovation. Revision of March 207 AEM s products are used globally for circuit protection and EMI signal filtering by many fortune 500 companies and other renowned customers in the telecommunication, computer, consumer electronics, and automotive industries. AEM s patented breakthrough technologies and lean manufacturing facilities ensure superior quality at the best value. AEM s products and services include the followings: Commercial Circuit Protective Components SolidMatrix Multilayer Monolithic Chip Fuses AirMatrix Surface Mount Fuses GcDiode ESD Suppressors Multilayer Varistors Inductive Components Multilayer Ferrite Chip Beads/Power Beads Multilayer Ferrite/Ceramic Inductors Thin Film Inductors Wire Wound Inductors AEM SolidMatrix Chip Fuses AEM offers the broadest line of surface mount chip fuses in the industry. AEM SolidMatrix Surface Mount Chip Fuses are recognized by Underwriters Laboratories (UL). Constructed as a multilayer monolithic structure using a co-firing process, these fuses offer superior mechanical integrity and are ideal for applications in LCD monitors, PC cards, disk drives, portable communication products, PDAs, digital cameras, DVDs, TVs, cell phones, rechargeable battery packs, battery chargers, etc. AEM AirMatrix Surface Mount Fuses With multiple internal safety approvals, high consistency and excellent inrush current withstanding capability, AEM s AirMatrix wire-in-air surface mount fuses are ideal for applications with high voltage and high inrush current, such as converters, inverters, lightings, LED drivers, LCD monitors, notebooks, PC servers, communication technology devices, office automation electronics, industrial equipment, home electrical applications, etc. AEM GcDiode ESD Suppressors With an ultra low capacitance of 0.25pF, AEM's GcDiode ESD suppressors are ideally suited for ESD protection of high speed data lines operating at data rates of GHz or higher. Constructed with a glass ceramic monolithic structure and incorporating advanced Ag/Pd composite ESD materials, the new ESD suppressors feature a low clamping voltage and instant response time, offering the highest level of ESD protection for sensitive circuits. Power losses are minimized as these components exhibit leakage current rates that are typically less than 0.nA in normal operation. AEM Multilayer Varistors AEM s Surface Mount Multilayer Varistors (MLV) are manufactured with zinc oxide based semi-conductive ceramics using multilayer co-firing technology. These varistors are designed to protect electronics systems from surge and transient over-voltages by limiting surge voltage and absorbing energy. The MLV products have a wide range of applications, such as cell phones, digital cameras, PDA, MP3, notebooks, telecommunications, automotive systems, data systems, power supplies, etc. Website: &

24 Company Overview AEM, a global manufacturer of electronic components, was founded to redefine the standards of quality and value in the industry with continuous innovation. Revision of March 207 AEM Quality Assurance AEM Suzhou facility is ISO 900:2008 and ISO 400 certified. Long known for its high quality products and exceptional customer service, AEM also provides a 7x24 technical support hotline. AEM is committed to constantly striving for excellence and perfection in providing products and customer services with the highest quality and value. We Go the Extra Mile to Give You the Best Price Website: &

25 Revision of March 207 CONTENTS SolidMatrix Surface Mount Fuses 5 Product Identification 5 Recommended Land Pattern 5 Environmental Tests 5 Electrical Specification 6 Fuse Selection and Temperature De-rating Guideline 6 Packaging 6 Soldering Temperature Profile 7 FA Series Size Size 0402 Size 4 SB Series Size Size 20 HI Series Size Size 26 HB Series Size HB Series 29 FF Series Size 32 TF-FUSE Thin Film Surface Mount Fuses 35 Product Identification 35 Environmental Tests 35 Temperature Effect on Current Rating 36 Website: &

26 Revision of March 207 Recommended Reflow Soldering Profile 36 Packaging 36 FF Series 0603 Size 37 HI Series 0603 Size 40 AirMatrix Surface Mount Fuses 43 Product Identification 43 Fuse Selection and Temperature De-rating Guideline 44 Soldering Temperature Profile 45 AF Series Size Size 50 MF Series Size 54 2 Size 58 Surface Mount ESD Suppressors 62 GcDiode ESD Suppressors 63 PeDiode ESD Suppressors 66 Surface Mount ESD Suppressor Array 69 Surface Mount TVS Diodes 72 ESD Protection Diode 73 Ultra Low Capacitance ESD Protection Diode 77 ESD Protection Diode Array 79 Surface Mount Multilayer Varistors 83 ESD Protection (ES) Series 89 Normal Surge Protection (NA) Series 90 High Surge Protection (HA) Series 92 High Voltage (HV) Series 93 ESD Array Series 95 Website: & 2

27 Revision of March 207 High Surge Protection Devices 96 Super High Voltage (SV) Series 98 Super High Current (SC) Series 0 Super High Network (SN) Series 2 3 Website: &

28 Revision of March 207 Surface Mount Fuses Quick Index: Series Size Current Rating (A) Voltage Rating Page SolidMatrix FA (Fast Acting) SB (Slow Blow) HI (High Inrush) , 0.75,.0,.5,.75, VDC 2.5, 3.0, 4.0, 5.0, 6.0, 7.0, VDC 0.5, 0.75,.0,.5 63VDC 2.0, 2.5, 3.0, 3.5, 4.0, VDC VDC , 0.75,.0,.5, 2.0, 3.0, VDC ,.25,.5, VDC 2.5, 3.0, 3.5, 4.0, 4.5, VDC 5.5, 6.0, 7.0, VDC.0,.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, 8.0.0,.5, VDC 2.5, 3.0, 3.5, 4.0, 4.5, VDC 6.0, 7.0, VDC.0,.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, VDC VDC 26 HB (High Current) 206, 2, 5, 20, 25, 30 24VDC 29 FF (Very Fast Acting) , 0.75,.0,.25,.5,.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, VDC 32 TF-FUSE FF (Very Fast Acting) 0603 AirMatrix HI (High Inrush) 0603 AF MF , 0.200, 0.250, 0.375, 0.50, 0.75,.00,.25,.50.75, 2.00, 2.50, 3.00, 3.50, 4.00, VDC 35VDC 0.50, 0.75,.00,.50 65VDC 2.00, 2.50, 3.00, 3.50, VDC 0.5, 0.63, 0.75,.0,.25,.5, VAC/25VDC 2.5, 3.0, 3.5, 3.5, 4.0, 5.0, 6.3, 7.0, 8.0,.0 25VAC/DC 2.0, 5.0, VAC/DC.50,.60, 2.00, 2.50, 3.00, 3.5, 3.50, , 6.30, 7.00, 8.00,.0, 2.0, , 0.63, 0.80,.00,.25,.60, VDC 32VDC VAC ,.50, 2.00, 2.50, VAC 58 Website: & 4

29 Revision of March 207 SolidMatrix Surface Mount Fuses Product Identification: F 0603 FA 00 V032 T M () (2) (3) (4) (5) (6) (7) () Product Code: F-Chip Fuse (2) Size Code: Standard EIA Chip Sizes (3) Series Code: FA - Fast Acting, SB - Slow Blow, HI - High Inrush, FF - Very Fast Acting, HB - High Current (4) Current Rating Code: ma (For HB, - A) (5) Voltage Rating Code: V VDC (6) Package Code: T - Tape & Reel, B - Bulk (7) Marking Code: M - With Marking Recommended Land Pattern: 0.06 (0.40) (0.70) 0.03 (0.80) (.00) (.50) (.60) (2.20) (4.40) Inch (mm) Inch (mm) 0402 Size 0603 Size 206 Size 0.07 (.80) Inch (mm) Environmental Tests: No. Test Requirement Test condition Test reference Soldering heat resistance DCR change % No mechanical damage One dip at 260C for 60 seconds 2 Solderability Minimum 95% coverage One dip at 245C for 5 seconds 3 Thermal shock 4 Moisture resistance 5 Salt spray 6 Mechanical vibration 7 Mechanical shock 8 Life DCR change % No mechanical damage DCR change 5% No excessive corrosion DCR change % No excessive corrosion DCR change % No mechanical damage DCR change % No mechanical damage No electrical opens during testing voltage drop change shall be less than 20% of initial value 0 cycles between -65C and +25C cycles 48 hour exposure 0.4 D.A. or 30 G between Hz 500 G, 0.5 ms, half-sine shocks 80% rated current (75% for < A fuses) for 2000 hours at ambient temperature between +20C and +30C MIL-STD-202 Method 2 MIL-STD-202 Method 208 MIL-STD-202 Method 7 MIL-STD-202 Method 6 MIL-STD-202 Method MIL-STD-202 Method 204 MIL-STD-202 Method 23 Refer to AEM QIQ6 5 Website: &

30 Revision of March 207 SolidMatrix Surface Mount Fuses Electrical Specification: Clearing Time Characteristics: Same as specified on the Short Form Data Sheet Insulation Resistance after Opening: 20,000 ohms typical when cleared with rated voltage applied. Fuse clearing under low voltage conditions may result in lower after clearing insulation resistance values. (Note: Under normal fault conditions (low or rated voltage conditions), AEM SolidMatrix fuses provide sufficient after clearing insulation resistance values for circuit protection.) Current Carrying Capacity: 0% rated current at +25 C ambient for 4 hours minimum when evaluated per MIL-PRF-2349 Interrupt Ratings: Same as specified in this catalog. Fuse Selection and Temperature De-rating Guideline: The ambient temperature affects the current carrying capacity of fuses. When a fuse is operating at a temperature higher than 25 C, the fuse shall be de-rated. To select a fuse from the catalog, the following rule may be followed: Catalog Fuse Current Rating = Nominal Operating Current / 0.75 / % De-rating at the maximum operating temperature. Example: At maximum operating temperature of 65 C, % De-rating is 90%. The nominal operating current is 4 A. The current rating for fuse selected from the catalog shall be: 4 / 0.75 / 90% = 5.9 or 6 A. Specifications and descriptions in this literature are as accurate as known at the time of publish, but are subject to change without notice. Temperature Effect on Current Rating g tin ṟa e D % Maximum Operating Temperature ( o C) Packaging: Chip Size Parts on 7 inch (78 mm) Reel 0402 (05), (608) 4, FF (608) 6, (326) 3,000 Website: & 6

31 Revision of March 207 SolidMatrix Surface Mount Fuses Soldering Temperature Profile: * Recommended Temperature Profile for Reflow Soldering Profile Feature Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Liquidous temperature(t L ) Time(t L ) maintained above T L Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C/second max. 27 C 60~50 seconds Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) 30 seconds * 6 C/second max. * Recommended Temperature Profile for Wave Soldering Time 25 C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Notice: Wave Soldering is suitable for 206 and 0603 size. Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM s website for updated catalog and terms and conditions of sale. 7 Website: &

32 Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 206 Size Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes Operating temperature range: -55 C to +25 C (with derating) Clearing Time Characteristics: % of current rating Clearing time at 25 C Agency Approval: 0% 4 hours min. 250% 5 seconds max. 400% 0.05 seconds max. Recognized Under the Components Program of UL. File Number: E Patents: Patent numbers US6,034,589, US6,228,230, US6,602,766, US7,268,66 B2, ZL , ZL02479., ZL , ZL , ZL , ZL , ZL Shape and Dimensions: Unit Inch mm L 0.26 ± ± 0.20 W ± ± 0.20 T ± ± 0.20 B ± ± 0.25 W L T B Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 F206FA0500V063TM C F206FA0750V063TM D F206FA00V063TM E F206FA500V063TM A at rated G F206FA750V063TM voltages H F206FA2000V063TM I F206FA2500V032TM J F206FA3000V032TM K F206FA4000V032TM M F206FA5000V032TM N F206FA6000V032TM A at rated voltages F206FA7000V032TM F206FA8000V032TM =. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Black Marking Character Code. Website: & 8

33 Pre-arcing Clear-Time (s) 0.5 A 0.75 A.0 A.5 A.75 A 2.0 A 2.5 A 3.0 A 4.0 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 206 Size Average Pre-arcing Time Curves: Current (A) 9 Website: &

34 I 2 t (A 2 s) Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 206 Size Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.0 A 3.0 A 2.5 A 2.0 A.75 A.5 A.0 A 0.75 A 0.5 A Time (s) Website: &

35 Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 0603 Size Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes Operating temperature range: -55 C to +25 C (with derating) Clearing Time Characteristics: % of current rating Clearing time at 25 C Agency Approval: 0% 4 hours min. 250% 5 seconds max. 400% 0.05 seconds max. Recognized Under the Components Program of UL. File Number: E Shape and Dimensions: Unit Inch mm L ± ± 0.5 W 0.03 ± ± 0.5 T 0.03 ± ± 0.5 B 0.04 ± ± 0.5 W L Patents: Patent numbers US6,034,589, US6,602,766, US7,268,66 B2, ZL , ZL02479., ZL , ZL , ZL , ZL , ZL B T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) F0603FA0500V063T Nominal I 2 t (A 2 s) 2 Marking (Optional) 3 F0603FA0750V063T D F0603FA00V063T E F0603FA500V063T G F0603FA2000V032T I 35 A at rated F0603FA2500V032T voltages J F0603FA3000V032T K F0603FA3500V032T L F0603FA4000V032T M F0603FA5000V032T N F0603FA6000V024T O C. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Black Marking Character Code. Website: &

36 Clearing Pre-arcing Time Time (s) (s) 0.5 A 0.75 A.0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 5.0 A 6.0 A Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 0603 Size Average Pre-arcing Time Curves: Current (A) Website: & 2

37 I 2 t (A 2 s) Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 0603 Size Average I 2 t vs. t Curves: A 5.0 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A 0.75 A 0.5 A Time (s) 3 Website: &

38 Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 0402 Size Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes Operating temperature range: -55 C to +25 C (with derating) Clearing Time Characteristics: % of current rating Clearing time at 25 C Agency Approval: 0% 4 hours min. 250% 5 seconds max. 400% 0.05 seconds max. Recognized Under the Components Program of UL. File Number: E Shape and Dimensions: Unit Inch mm L ± ± 0. W ± ± 0. T ± ± 0. B 0.0 ± ± 0. W L Patents: Patent numbers US6,034,589, US6,602,766, US7,268,66 B2, ZL , ZL02479., ZL , ZL , ZL , ZL , ZL B T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t (A 2 s) 2 F0402FA0500V024T F0402FA0750V024T F0402FA00V024T F0402FA500V024T A at rated voltage F0402FA2000V024T F0402FA3000V024T F0402FA4000V024T Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. Website: & 4

39 Pre-arcing Clearing Time Time (s) (s) 0.5 A 0.75 A.0 A.5 A 2.0 A 3.0 A 4.0 A Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 0402 Size Average Pre-arcing Time Curves: Current (A) 5 Website: &

40 I 2 t (A 2 s) Revision of March 207 SolidMatrix Surface Mount Fuses FA Series (Fast Acting), 0402 Size Average I 2 t vs. t Curves: A 3.0 A 2.0 A.5 A.0 A 0.75 A 0.5 A Time (s) Website: & 6

41 Revision of March 207 SolidMatrix Surface Mount Fuses SB Series (Slow Blow), 206 Size Features: High inrush current withstanding capability Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes Operating temperature range: -55 C to +25 C (with derating) Clearing Time Characteristics: % of current rating Clearing time at 25 C 0% 4 hours min. 200% second min. 20 seconds max. 300% 0. seconds min. 3 seconds max. 800% seconds min seconds max. Shape and Dimensions: Unit Inch mm L 0.26 ± ± 0.20 W ± ± 0.20 T ± ± 0.20 B ± ± 0.25 Agency Approval: Recognized Under the Components Program of UL. File Number: E W L Patents: Patent numbers US6,034,589, US6,602,766, US7,268,66 B2, ZL , ZL02479., ZL , ZL , ZL , ZL , ZL , ZL B T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 F206SB00V063TM E F206SB250V063TM F F206SB500V063TM G F206SB2000V063TM I F206SB2500V032TM J 50 A at rated F206SB3000V032TM K voltages F206SB3500V032TM L F206SB4000V032TM M F206SB4500V032TM T F206SB5000V032TM N F206SB5500V024TM U F206SB6000V024TM O 60 A at rated F206SB7000V024TM voltage P F206SB8000V024TM R. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Red Marking Character Code. 7 Website: &

42 Pre-arcing Clear-Time Time (s) (s).0 A.25 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 5.5 A 6.0 A 7.0 A 8.0 A Revision of March 207 SolidMatrix Surface Mount Fuses SB Series (Slow Blow), 206 Size Average Pre-arcing Time Curves: Current (A) Website: & 8

43 I 2 t (A 2 s) Revision of March 207 SolidMatrix Surface Mount Fuses SB Series (Slow Blow), 206 Size Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.5 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.25 A.0 A Time (s) 9 Website: &

44 Revision of March 207 SolidMatrix Surface Mount Fuses SB Series (Slow Blow), 0603 Size Clearing Time Characteristics: % of Current Rating Clearing time at 25 C 0% 4 hours min. 200% second min. 20 seconds max. 300% 0. seconds min. 3 seconds max. 800% ( A -.5 A) seconds min seconds max. 800% (2 A - 8 A) 0.00 seconds min seconds max. Agency Approval: Recognized Under the Components Program of UL. File Number: E Patents: Patent numbers US6,034,589, US6,602,766, US7,268,66 B2 ZL , ZL02479., ZL , ZL , ZL , ZL , ZL , ZL Features: High inrush current withstanding capability Ceramic Monolithic structure Silver fusing element and silver termination with nickel and tin plating Symmetrical design with marking on both sides (optional) Operating temperature range: -55 C to +25 C (with derating) Shape and Dimensions: Unit Inch mm L ± ± 0.5 W 0.03 ± ± 0.5 T 0.03 ± ± 0.5 B 0.04 ± ± 0.5 W B L T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) F0603SB00V032T.0 32 Interrupting Ratings Nominal Cold DCR(Ω) Nominal I 2 t (A 2 s) 2 Marking (Optional) E F0603SB500V032T G F0603SB2000V032T I F0603SB2500V032T J 50 A at rated F0603SB3000V032T voltage K F0603SB3500V032T L F0603SB4000V032T M F0603SB4500V032T T F0603SB5000V032T N F0603SB6000V032T O F0603SB7000V032T A at rated P voltage F0603SB8000V032T R. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Red Marking Character Code. Website: & 20

45 Pre-arcing Clearing Time (s) (s).0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of March 207 SolidMatrix Surface Mount Fuses SB Series (Slow Blow), 0603 Size Average Pre-arcing Time Curves: Current (A) 2 Website: &

46 I 2 t (A 2 s) Revision of March 207 SolidMatrix Surface Mount Fuses SB Series (Slow Blow), 0603 Size Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A Time (s) Website: & 22

47 Revision of March 207 SolidMatrix Surface Mount Fuses HI Series (High Inrush), 206 Size Clearing Time Characteristics: % of Current Rating Clearing time at 25 C 0% 4 hours min. 200% second min. 60 seconds max. 00%(.0 A -5.0 A) seconds min seconds max. 00%(6.0 A -8.0 A) seconds min seconds max. Agency Approval: Recognized Under the Components Program of UL. File Number: E Patents: Patent numbers US6,034,589, US6,602,766, US7,268,66 B2, ZL , ZL02479., ZL , ZL , ZL , ZL , ZL Features: High inrush current withstanding capability Ceramic Monolithic structure Silver fusing element and silver termination with nickel and tin plating Symmetrical design with marking on both sides (optional) Operating temperature range: -55 C to +25 C (with derating) Shape and Dimensions: Unit Inch mm L 0.26 ± ± 0.20 W ± ± 0.20 T ± ± 0.20 B ± ± 0.25 W B L T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) F206HI00V063TM.0 63 Interrupting Ratings Nominal Cold DCR(Ω) Nominal I 2 t Marking (A 2 s) 2 Code E F206HI500V063TM G F206HI2000V063TM I F206HI2500V032TM J F206HI3000V032TM A at rated voltages K F206HI3500V032TM L F206HI4000V032TM M F206HI4500V032TM T F206HI5000V032TM N F206HI6000V024TM O F206HI7000V024TM A at rated voltage P F206HI8000V024TM R. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 00% of current rating. 3. Green Marking Character Code. 23 Website: &

48 Pre-arcing Clearing Time (s).0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of March 207 SolidMatrix Surface Mount Fuses HI Series (High Inrush), 206 Size Average Pre-arcing Time Curves: Current(A) Website: & 24

49 I 2 t (A 2 s) Revision of March 207 SolidMatrix Surface Mount Fuses HI Series (High Inrush), 206 Size Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A Time (s) 25 Website: &

50 Revision of March 207 SolidMatrix Surface Mount Fuses HI Series (High Inrush), 0603 Size Clearing Time Characteristics: % of Current Rating Clearing time at 25 C 0% 4 hours min. 200% second min. 60 seconds max. 00% (-5A) seconds min seconds max. Features: High inrush current withstanding capability Ceramic Monolithic structure Silver fusing element and silver termination with nickel and tin plating Symmetrical design with marking on both sides (optional) Operating temperature range: -55 C to +25 C (with derating) Shape and Dimensions: Unit Inch mm L ± ± 0.5 W 0.03 ± ± 0.5 T 0.03 ± ± 0.5 B 0.04 ± ± 0.5 Agency Approval: Recognized Under the Components Program of UL. File Number: E W L Patents: Patent numbers US6,034,589, US6,602,766, US7,268,66 B2, ZL , ZL02479., ZL , ZL , ZL , ZL , ZL B T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR(Ω) Nominal I 2 t (A 2 s) 2 Marking (Optional) 3 F0603HI00V032T E F0603HI500V032T G F0603HI2000V032T I F0603HI2500V032T J 50 A at rated F0603HI3000V032T voltage K F0603HI3500V032T L F0603HI4000V032T M F0603HI4500V032T T F0603HI5000V032T N F0603HI6000V032T O 80 A at rated F0603HI7000V032T P voltage F0603HI8000V032T R. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 00% of current rating. 3. Green Marking Character Code. Website: & 26

51 Pre-arcing Time (s).0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of March 207 SolidMatrix Surface Mount Fuses HI Series (High Inrush), 0603 Size Average Pre-arcing Time Curves: Current (A) 27 Website: &

52 I 2 t (A 2 s) Revision of March 207 SolidMatrix Surface Mount Fuses HI Series (High Inrush), 0603 Size Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A Time (s) Website: & 28

53 Revision of March 207 SolidMatrix Surface Mount Fuses HB Series (High Current), 206 Size Features: Special products for high current rating applications Higher current ratings and excellent inrush current withstanding capability (high I 2 t) Glass ceramic monolithic structure Silver fusing element and silver termination with nickel and tin plating Superior arc suppression capability Symmetrical design with marking on both sides (optional) Operating temperature range: -55 C to 25 C (with derating) Clearing Time Characteristics: % of current rating Clearing time at 25 C 0% 4 hours min. 350% 5 seconds max. Agency Approval: Recognized Under the Components Program of UL. File Number: E Shape and Dimensions: Unit Inch mm L 0.26 ± ± 0.20 W ± ± 0.20 T ± ± 0.20 B ± ± 0.25 L W Patents: Patent numbers US6,034,589, US6,602,766, US6,844,278, ZL , ZL02479., ZL , ZL , ZL , ZL B T Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR(Ω) Nominal I 2 t (A 2 s) 2 F206HBV024TM A at rated Q F206HB2V024TM 2 24 voltage X F206HB5V024TM Y 200 A at rated voltage F206HB20V024TM Z F206HB25V024TM F206HB30V024TM Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 00% of current rating. 3. Red Marking Character Code. 250 A at rated voltage 300 A at rated voltage Marking Code S V 29 Website: &

54 Pre-arcing Clearing Time Time (s) (s) A 2 A 5 A 20 A 25 A 30 A Revision of March 207 SolidMatrix Surface Mount Fuses HB Series (High Current), 206 Size Average Pre-arcing Time Curves: Current (A) Website: & 30

55 Revision of March 207 SolidMatrix Surface Mount Fuses HB Series (High Current), 206 Size Average I 2 t vs. t Curves: A 25 A 20 A 5 A 2 A A I 2 t (A 2 s) Time (s) 3 Website: &

56 Revision of March 207 SolidMatrix Surface Mount Fuses FF Series (Very Fast Acting), 0603 Size Clearing Time Characteristics: % of Current Rating Clearing Time at 25 C 0% 4 hours min. 200% 0.0 seconds min. 5 seconds max. 300% 0.00 seconds min. 0.2 seconds max. Agency Approval: Recognized Under the Components Program of UL. File Number: E Features: Very fast acting at 200% and 300% overloads Excellent inrush current withstanding capability at high overloads Thin body for space limiting applications Glass ceramic monolithic structure Silver fusing element and silver termination with nickel and tin plating Symmetrical design with marking on both sides (optional) Operating temperature range: -55 C to 25 C (with derating) Shape and Dimensions: Unit Inch mm L ± ± 0.5 W 0.03 ± ± 0.5 T / / B 0.04 ± ± 0.5 W L Patents: Patent numbers US6,034,589, US6,602,766, US6,844,278, ZL , ZL02479., ZL , ZL , ZL , ZL Ordering Information: B T Part Number Current Rating(A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR(Ω) Nominal I 2 t (A 2 s) 2 Marking (Optional) 3 F0603FF0500V032T C F0603FF0750V032T A at rated voltage D F0603FF00V032T E F0603FF250V032T F0603FF500V032T G F0603FF750V032T H F0603FF2000V032T I F0603FF2500V032T A at rated J F0603FF3000V032T voltage K F0603FF3500V032T L F0603FF4000V032T M F0603FF4500V032T T F0603FF5000V032T N. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Blue Marking Character Code. F Website: & 32

57 Revision of March 207 SolidMatrix Surface Mount Fuses FF Series (Very Fast Acting), 0603 Size Pre-arcing Time (s) 0.5 A 0.75 A Clear-Time (s).0 A.25 A.5 A.75 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A Average Pre-arcing Time Curves: Current (A) 33 Website: &

58 Revision of March 207 SolidMatrix Surface Mount Fuses FF Series (Very Fast Acting), 0603 Size Average I2t vs. t Curves: A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.75 A.5 A.25 A.0 A 0.75 A 0.5 A 0 I2t (A2s) Time (s) Website: & 34

59 Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses Product Identification: T 0603 FF 00 T M () (2) (3) (4) (5) (6) () Product Code: T-Thin Film (2) Size Code: Standard EIA chip sizes (3) Series Code: FF Very Fast Acting, HI High Inrush (4) Current Rating Code: A, 00.0A (5) Package Code: T Tape & Reel; B Bulk (6) Marking Code: M With mark (optional) Environmental Tests: No. Test item Requirement Test condition Reference Bending A: % DCR change max. >A: 20% DCR change max. 2mm Refer to AEM QIQ034 2 Solderability 95% coverage min. One dip at 255 for 5 seconds MIL-STD-202 Method Thermal shock DCR change within ±% No mechanical damage 0 cycles between -55 C and +25 C MIL-STD-202 Method 7 4 Moisture resistance DCR change within ±% No excessive corrosion cycles MIL-STD-202 Method 6 5 Salt spray 6 Mechanical vibration 7 Mechanical shock 8 Life DCR change within ±% No excessive corrosion DCR change within ±% No mechanical damage DCR change within ±% No mechanical damage Change of voltage drop within ±%, no open circuit 5% salt solution, 48 hour exposure 0.4 D.A. or 30G between 5 and 3000 Hz 500G, 0.5 ms, half sine shocks 75% rated current, 2000 hours, ambient temperature +20 C to 30 C MIL-STD-202 Method MIL-STD-202 Method 204 MIL-STD-202 Method 23 Refer to AEM QIQ6 Thermal Shock When Making Correction with a Soldering Iron: The temperature of solder iron tip should be controlled under 350 C and soldering time should be less than 3 sec. The soldering iron tip should not directly touch the top side termination of the component. Fig 3 Correct handling method of soldering iron 35 Website: &

60 Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses Temperature Effect on Current Rating: Recommended Reflow Soldering Profile: Profile Feature Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C/second max. Liquidous temperature(t L ) Time(t L ) maintained above T L Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) 27 C 60~50 seconds 30 seconds * Ramp-down rate (T p to T L ) 6 C/second max. Time 25 C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Packaging: Chip Size Parts on 7 inch (78mm) Reel 0603(608) 8,000 Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM s website for updated catalog and terms and conditions of sale. Website: & 36

61 Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses FF Series (Very Fast Acting), 0603 Size Features: Very fast acting at 200% overload current levels Low DCR High inrush current withstanding capability Fiberglass enforced epoxy fuse body Copper termination with nickel and tin plating Halogen free, RoHS compliance and lead-free Applications: Notebook computers and tablets Digital cameras Memory cards Toys Bluetooth earphones Portable electronic devices Clearing Time Characteristics: Shape and Dimensions: Unit Inch mm Length (L) ± ± 0. Width (W) ± ± 0. Thickness (T) 0.02 ± ± 0. Termination bandwidth (b) 0.04 ± ± 0. % of Current Rating Opening Time at 25 o C 0% 4 hours min. 200% 5 seconds max. 300% 0.2 second max. Agency Approval: Recognized Under the Components Program of UL. File Number: E Typical Ratings and Characteristics: Operating temperature: -55 to +90 C Part Number Current Voltage Nominal Nominal I 2 t Interrupting Rating Rating (A) Rating (VDC) Cold DCR (Ω) (A2s)2 T0603FF050TM T0603FF0200TM T0603FF0250TM A@35V DC/AC T0603FF0375TM A@65V DC T0603FF0500TM T0603FF0750TM T0603FF00TM T0603FF250TM A@35V DC/AC T0603FF500TM A@65V DC T0603FF750TM T0603FF2000TM T0603FF2500TM T0603FF3000TM A@35V DC/AC A@24V DC/AC T0603FF3500TM T0603FF4000TM T0603FF5000TM Measured at % of rated current and 25 C ambient. 2 Melting I 2 t at 0.00 sec. Marking 37 Website: &

62 0.50 A A A A 0.50 A 0.75 A.00 A.25 A.50 A.75 A 2.00 A 2.50 A 3.00 A 3.50 A 4.00 A 5.00 A Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses FF Series (Very Fast Acting), 0603 Size Average Pre-arcing Time Curves: Website: & 38

63 Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses FF Series (Very Fast Acting), 0603 Size Average I 2 t vs. t Curves: 5.00 A 4.00 A 3.50 A 3.00 A 2.50 A 2.00 A.75 A.50 A.25 A.00 A 0.75 A 0.50 A A A A 0.50 A 39 Website: &

64 Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses HI Series (High Inrush), 0603 Size Features: Low DCR High inrush current withstanding capability Fiberglass enforced epoxy fuse body Copper termination with nickel and tin plating Halogen free, RoHS compliance and lead-free Applications: Consumer Electronics Notebook computers and tablets Telecom Devices Mobil Phone Digital cameras Battery Pack Digital Camera Shape and Dimensions: Unit Inch mm Length (L) ± ± 0. Width (W) ± ± 0. Thickness (T) 0.04 ± ± 0. Termination bandwidth (b) 0.04 ± ± 0. Clearing Time Characteristics: % of Current Rating Opening Time at 25 o C 0% 4 hours min. 200% second min. 60 seconds max. 300% second min second max. Agency Approval: Recognized Under the Components Program of UL. File Number: E Typical Ratings and Characteristics: Operating temperature: -55 to +90 C Part Number Current Rating (A) Voltage Rating (VDC) T0603HI0500TM Interrupting Rating Nominal Cold DCR (Ω) Nominal I 2 t (A 2 s) 2 Marking C T0603HI0750TM T0603HI00TM A@35V DC/AC 3A@65V DC D E T0603HI500TM T T0603HI2000TM F T0603HI2500TM J T0603HI3000TM A@35V DC/AC 50A@24V DC/AC L T0603HI3500TM N T0603HI4000TM P Measured at % of rated current and 25 C ambient. 2 Melting I 2 t at 0.00 sec. Website: & 40

65 Pre-arcing Time (Sec) 0.50 A 0.75 A.00 A.50 A 2.00 A 2.50 A 3.00 A 3.50 A 4.00 A Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses HI Series (High Inrush), 0603 Size Average Pre-arcing Time Curves: Current (A) 4 Website: &

66 I 2 t (A 2 S) Revision of March 207 TF-FUSE Thin Film Surface Mount Fuses HI Series (High Inrush), 0603 Size Average I 2 t vs. t Curves: A 3.50 A 3.00 A 2.50 A 2.00 A.50 A.00 A 0.75 A 0.50 A Time (Sec) Website: & 42

67 Revision of March 207 AirMatrix Surface Mount Fuses Product Identification: AF2.00 V25 T M () (2) (3) (4) (5) () Series Code: AF2 (2) Current Rating Code:.00.00A (3) Voltage Rating Code: V25 25VDC (4) Package Code: T - Tape & Reel, B - Bulk (5) Marking Code: M - With Marking AF 206 F 2.00 T M () (2) (3) (4) (5) (6) () Series Code: AF AF Series, MF MF Series (2) Size Code: Standard EIA Chip Sizes (3) Time/Current Characteristic: F (4) Current Rating: A (5) Package Code: T - Tape & Reel, B - Bulk (6) Marking Code: M - With Marking Recommended Land Pattern: AF2 AF206 MF24 MF2 Inch mm Inch mm Inch mm Inch mm L G H Packaging: Chip Size Parts on 7 inch (78 mm) Reel 24 (625) 2,000 2 (3225) 2, (326) 3,500 Storage: The maximum ambient temperature shall not exceed 35 C. Storage temperatures higher than 35 C could result in the deformation of packaging materials. The maximum relative humidity recommended for storage is 75%. High humidity with high temperature can accelerate the oxidation of the solder plating on the termination and reduce the solderability of the components. Sealed vacuum foil bags with desiccant should only be opened prior to use. The products should not be stored in areas where harmful gases containing sulfur or chlorine are present. 43 Website: &

68 Revision of March 207 AirMatrix Surface Mount Fuses Fuse Selection and Temperature De-rating Guideline: The ambient temperature affects the current carrying capacity of fuses. When a fuse is operating at a temperature higher than 25 o C, the fuse shall be derated. To select a fuse from the catalog, the following rule may be followed: Catalog Fuse Current Rating = Nominal Operating Current / 0.75 / % De-rating at the maximum operating temperature. Example: At maximum operating temperature of 65 o C, % De-rating is 90%. The nominal operating current is 4 A. The current rating for fuse selected from the catalog shall be: 4 / 0.75 / 90% = 5.9 or 6.3 A. % De-rating Temperature Effect On Current Rating Maximum Operating Temperature( ) Environmental Tests: Reliability Test Test Condition and Requirement Test Reference Reflow & Bend 3 reflows at 245 C followed by a 2 mm bend, 20% DCR change max. (% for A), no mechanical damage Refer to AEM QIQ034,QIQ048 Solderability 245 C, 5 seconds, new solder coverage 90% minimum MIL-STD-202 Method 208 Soldering Heat Resistance 260 C, seconds, 20% DCR change max. (% for A), new solder coverage 75% minimum MIL-STD-202 Method 2 Life 25 C, 2000 hours, 80% rated current (75% for < A), voltage drop change ±20% Refer to AEM QIQ6 Thermal Shock -65 C to +25 C, 0 cycles, % DCR change max., no mechanical damage MIL-STD-202 Method 7 Mechanical Vibration Hz, 0.4 inch double amplitude or 30 G peak, % DCR change max., no mechanical damage MIL-STD-202 Method 204 Mechanical Shock Salt Spray Moisture Resistance 500 G, 0.5 milliseconds, half-sine shocks, % DCR change max., no mechanical damage 5% salt solution, 48 hour exposure, % DCR change max., no excessive corrosion cycles, 5% DCR change max., no excessive corrosion MIL-STD-202 Method 23 MIL-STD-202 Method MIL-STD-202 Method 6 Website: & 44

69 Revision of March 207 AirMatrix Surface Mount Fuses Soldering Temperature Profile: * Recommended Temperature Profile for Reflow Soldering Profile Feature Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Liquidous temperature(t L ) Time(t L ) maintained above T L Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C/second max. 27 C 60~50 seconds Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) Time 25 C to peak temperature 30 seconds * 6 C/second max. 8 minutes max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum * Recommended Temperature Profile for Wave Soldering Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM s website for updated catalog and terms and conditions of sale. 45 Website: &

70 Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 24 Size Features: Fast acting at 200% overload current level Excellent inrush current withstanding capability Fiberglass enforced epoxy fuse body Copper or copper alloy composite fuse link Copper termination with nickel and tin plating Halogen free, RoHS compliant and 0% lead-free Operating temperature range: -55 C to +25 C (with derating) Application Fields: Power Supply, e.g. DC/DC converters, DC/AC inverters, Backlight drivers, etc. Consumer Electronics, e.g. LCD TVs, PDP, DVDs, PCM, etc. Communication Technology, e.g. Telecom systems, Networking, Modems, Routers, Changers, Base stations, etc. Office Automation Electronics IT Products, e.g. LCD monitors, Notebooks, PC servers, etc. Clearing Time Characteristics: % of Current Rating Clearing Time at 25 C Shape and Dimensions: Unit Inch mm L ± ± 0.5 W ± ± 0.5 T ± ± 0.20 B ± ± 0.38 W L B 0% 4 hours min. T 200%(0.50~.0 A) 0.0 seconds min. 5 seconds max. 200%(2.0~20.0 A) 0.0 seconds min. 20 seconds max. Agency Approval: Recognized Under the Components Program of Underwriters Laboratories. File Number: E PSE Certificate No: NBK807-JP37 TUV File Number: CQC No.: CQC Patents: Patent numbers ZL , ZL , ZL , ZL , ZL , ZL X. Website: & 46

71 Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 24 Size Ordering Information: Part Number Current Rating (A) Voltage Rating (V) Interrupting Rating Nominal Cold DCR (Ω) Nominal Agency Approval I 2 Marking t (A 2 s) 2 (Optional) 3 AC DC UL PSE TUV CQC AF2-0.50V25TM C AF2-0.63V25TM S AF2-0.75V25TM AF2-.00V25TM AF2-.25V25TM AF2-.50V25TM AF2-2.00V25TM AF2-2.50V25TM TUV: 0.5 ~ 2 A VAC VDC CQC: 0.5 A A 2 A VAC VDC D E F G I J AF2-3.00V25TM 3.0 PSE: ~ 5 A K VAC AF2-3.5V25TM V AF2-3.50V25TM AF2-4.00V25TM AF2-5.00V25TM AF2-6.30V25TM UL: 0.5 ~ 2 A 250VAC.5 ~8 A 0.5 ~ 8 A VDC VDC L M N O AF2-7.00V25TM P AF2-8.00V25TM R AF2-.0V25TM.0 35 A@ 25 VAC VDC VDC Q AF2-2.0V065TM VAC X AF2-5.0V065TM VDC VDC Y AF2-20.0V065TM VAC 0 65 VDC VDC Z. Measured at % rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. White Marking Character Code. 47 Website: &

72 Pre-arcing Clearing Time (s) 0.50 A 0.63 A 0.75 A.0 A.25 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 3.5 A 4.0 A 5.0 A 6.3 A 7.0 A 8.0 A.0 A 2.0 A 5.0 A 20.0 A Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 24 Size Average Pre-arcing Time Curves: Current (A) Website: & 48

73 I 2 t (A 2 s) Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 24 Size Average I 2 t vs. t Curves: A 5.0 A 2.0 A.0 A 8.0 A 7.0 A 6.3 A 5.0 A 4.0 A 3.5 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.25 A.0 A 0.75 A 0.63 A 0.5 A Time (s) 49 Website: &

74 Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 206 Size Features: Fast acting at 250% overload current level Excellent inrush current withstanding capability Extremely thin body for space saving Much safer with wire-in-air design Fiberglass enforced epoxy fuse body Copper termination with nickel and tin plating Operating temperature range: -55 C to +25 C (with derating) 0% lead-free Application Fields: Notebook, Ultrabook Backlight Driver DC/DC Converter Low voltage lighting power Automotive electronics Clearing Time Characteristics: Shape and Dimensions: Unit Inch mm L 0.26 ± ± 0.20 W / / T ± ± 0.5 B ± ± 0.30 Clearing Time at 25 C % of Current Rating Min. Max. 0% 4 hour W L B 250% 5 seconds T Agency Approval: Recognized Under the Components Program of Underwriters Laboratories. File Number: E Website: & 50

75 Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 206 Size Ordering Information: Part Number Current Rating (A) Marking ( White ) Voltage Rating (VDC) Interrupting Rating Nominal DCR (Ω) Nominal I 2 t (A 2 s) AF206F.50TM.50 G AF206F.60TM.60 T AF206F2.00TM 2.00 I AF206F2.50TM 2.50 J A@65VDC AF206F3.00TM 3.00 K AF206F3.5TM 3.5 V AF206F3.50TM 3.50 L AF206F4.00TM 4.00 M AF206F5.00TM 5.00 N AF206F6.30TM 6.30 O AF206F7.00TM 7.00 P AF206F8.00TM 8.00 R 32 50A@32VDC AF206F.0TM.0 Q AF206F2.0TM 2.0 X AF206F5.0TM 5.0 Y Resistance is measured at % of rated current and 25 ambient. 2. Melting l 2 t is calculated at 0.00 second pre-arcing time. 5 Website: &

76 Pre-arcing Time (s).50 A.60 A 2.00 A 2.50 A 3.00 A 3.5 A 3.50 A 4.00A 5.00A 6.30A 7.00A 8.00A.0A 2.0A 5.0A Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 206 Size Average Pre-arcing Time Curves: Current (A) Website: & 52

77 I 2 t (A 2 s) Revision of March 207 AirMatrix Surface Mount Fuses AF Series, 206 Size Average I 2 t vs. t Curves: A 2.0A.0A 8.00A 7.00A 6.30A 5.00A 4.00A 3.50A 3.5A 3.00A 2.50A 2.00A.60A.50A Time (s) 53 Website: &

78 Revision of March 207 AirMatrix Surface Mount Fuses MF Series, 24 Size Features: Extremely small size with 250 VAC rating Surface mount fuses in AC applications Excellent inrush current withstanding capability Fiberglass enforced epoxy fuse body Copper termination with nickel and tin plating 0% lead-free Operating temperature range: -55 C to +25 C (with derating) Compliant with IEC Application Fields: Lighting: Ballast, LED Drivers Power: Chargers, Adapters, Power Boards Medical Equipment Indutrial Equipment White Goods Clearing Time Characteristics: Clearing Time at 25 C % of Current Rating Min. Max. 25% hour Shape and Dimensions: Inch mm L ± ± 0.5 W ± ± 0.5 H ± ± 0.20 BW ± ± 0.38 P % 20 seconds 00% 0.00 seconds 0.0 seconds W L BW Agency Approval: Agency File No. H UL CQC E CQC P KC SU /2002 PSE PSE VDE Patents: Patent numbers ZL , ZL , ZL , ZL , ZL , ZL X. Website: & 54

79 Revision of March 207 AirMatrix Surface Mount Fuses MF Series, 24 Size Ordering Information: Part Number Current Rating (A) Voltage Rating (VAC) Interrupting Ratings Nominal DCR (Ω) Voltage Drop Max. (mv) Nominal I 2 t (A 2 s) Marking ( Black ) MF24F0.500TM C MF24F0.630TM S MF24F0.800TM MF24F.000TM VAC H E MF24F.250TM VDC F MF24F.600TM T MF24F2.000TM I Notes: - Resistance is measured at % of rated current and 25 ambient. - Voltage drop is measured at 0% of rated current. - Melting l 2 t is calculated at 0.00 second pre-arcing time. 55 Website: &

80 Pre-arcing Time (s) 0.50 A 0.63 A 0.80 A.00 A.25 A.60 A 2.00 A Revision of March 207 AirMatrix Surface Mount Fuses MF Series, 24 Size Average Pre-arcing Time Curves: Current (A) Website: & 56

81 I 2 t (A 2 s) Revision of March 207 AirMatrix Surface Mount Fuses MF Series, 24 Size Average I 2 t vs. t Curves: A.60 A.25 A.00 A 0.80 A 0.63 A 0.50 A Time (s) 57 Website: &

82 Revision of March 207 AirMatrix Surface Mount Fuses MF Series, 2 Size Features: Extremely small size with VAC rating Surface mount fuses in AC applications Excellent inrush current withstanding capability Operating temperature range: -55 C to +25 C (with derating) Fiberglass enforced epoxy fuse body Copper termination with nickel and in plating Halogen free, RoHS compliant 0% lead-free Typical Application: Lighting and Driver Low Voltage Power and Charger Application Industrial Equipment White Goods Clearing Time Characteristics: Shape and Dimensions: Unit Inch mm L / /-0 W ± ± 0.20 H ± ± 0.20 BW ± ± 0.30 P % of current rating Clearing time at 25 C Agency Approval: 0% 4 hours min. 250% 5 seconds max. Recognized Under the Components Program of UL. File Number: E Patents: Patent numbers ZL , ZL , ZL , ZL , ZL , ZL X. Ordering Information: Part Number Current Rating (A) Voltage Rating (VAC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 (Black) MF2F.00TM E MF2F.50TM G MF2F2.00TM VAC 0 65 VDC I MF2F2.50TM J MF2F3.00TM K Notes: - Resistance is measured at % of rated current and 25 ambient. - I 2 t is measured at 0.00s. Website: & 58

83 Pre-arcing Time (s).0 A.5 A 2.0 A 2.5 A 3.0 A Revision of March 207 AirMatrix Surface Mount Fuses MF Series, 2 Size Average Pre-arcing Time Curves: Current (A) 59 Website: &

84 I 2 t (A 2 s) Revision of March 207 AirMatrix Surface Mount Fuses MF Series, 2 Size Average I 2 t vs. t Curves: A 2.5 A 2.0 A.5 A.0 A Time (s) Website: & 60

85 Revision of March 207 ESD Suppressors Quick Index: Series Size Capacitance ( GHz) Page Surface Mount ESD Suppressors Surface Mount TVS Diodes GcDiode ESD Suppressors 0603, pf (typical) 63 PeDiode ESD Suppressors pf (typical) 66 ESD Suppressor Array pf (typical) 69 ESD Protection Diode Ultra Low Capacitance ESD Protection Diode pf (typical) pf (typical) pf (typical) 77 ESD Protection Diode Array pf (typical) 79 6 Website: &

86 Revision of March 207 Surface Mount ESD Suppressors Recommended Reflow Soldering Profile: Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Profile Feature 50 C 200 C 60~20 seconds Ramp-uprate (T L to T p ) 3 C/second max. Liquidous temperature(t L ) Time(t L ) maintained above T L 27 C 60~50 seconds Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) 30 seconds * 6 C/second max. Pb-Free Assembly Time 25 C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Recommended Conditions for Hand Soldering:. Appropriate temperature (max.) of soldering iron tip/soldering time (max.): 280 C/s or 350 C/ 3s. 2. Using hot air rework station with tip that can melt the solder on both terminations at the same time is strongly recommended. Do not directly contact the chip termination with the tip of soldering iron Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM s website for updated catalog and terms and conditions of sale. Website: & 62

87 Revision of March 207 Surface Mount ESD Suppressors GcDiode ESD Suppressors Features: Glass ceramic monolithic structure Ultra low capacitance (0.25 pf typical) Low leakage current (<0. na) Fast response time (< ns) Bi-directional flip-chip design Low clamping voltage Silver termination with nickel Withstands multiple 8 kv ESD strikes 0% lead-free and RoHS compliant Electrical Characteristics: Characteristic Value IEC Direct Discharge IEC Air Discharge Trigger Voltage Clamping Voltage Response Time Capacitance ( GHz) Leakage Current Rated Voltage ESD Pulse Withstand Level 4-8 kv Level 4-5 kv 300 V (typical) (measured per IEC , Level 4, 8 kv) 30 V (typical) (measured per IEC , Level 4, 8 kv) Less than ns 0.25 pf (typical) Less than 0. na (typical) (measured at 4 VDC) 4 VDC (max.) 00 Pulses (typical) Shape and Dimensions: Size L W T BW 0402 (05) ± (.00 ± 0.) ± (0.5 ± 0.) ± (0.5 ± 0.) 0.0 ± (0.25 ± 0.) 0603 (608) ± (.60 ± 0.5) 0.03 ± (0.80 ± 0.5) 0.03 ± (0.80 ± 0.5) 0.04 ± (0.36 ± 0.5) 63 Website: &

88 Revision of March 207 Surface Mount ESD Suppressors GcDiode ESD Suppressors Recommended PC Board Land Pattern: Chip Size L Inch (mm) G Inch (mm) H Inch (mm) 0402 (05) (.60) 0.06 (0.40) (0.70) 0603 (608) (2.20) 0.03 (0.80) (.00) Patents: Patent numbers ZL Product Identification: ES 0603 V04 C T () (2) (3) (4) (5) () Category code (2) Dimension code: L x W (inch) The first two digits - L (length) The last two digits - W (width) (3) Rated voltage code: V04-4 VDC (4) Series code (5) Package code: T - Tape & Reel B - Bulk Representative Test Waveform Per IEC Level 4, 8kV: ESD curve without GcDiode Y2 Y Suppressed ESD curve with GcDiode Website: & 64

89 Revision of March 207 Surface Mount ESD Suppressors GcDiode ESD Suppressors Reliability Tests: Reliability Test Test Conditions and Requirements Test Reference Flexure Strength 2 mm bend, meet triggering voltage and clamping voltage requirements while being bent, and meet leakage current requirement after bending. IEC Solderability 255 C, 5 seconds 90% coverage min. MIL-STD-202 Method 208 Soldering Heat Resistance 260 C, seconds No mechanical damage Pass ESD test. MIL-STD-202 Method 2 Thermal Shock 0 cycles between 65 C and +25 C No mechanical damage Pass ESD test MIL-STD-202 Method 7 Mechanical Vibration 0.4 D.A. or 30 G between Hz No mechanical damage Pass ESD test MIL-STD-202 Method 204 Mechanical Shock 500 G, 0.5 ms, half-sine shocks No mechanical damage Pass ESD test MIL-STD-202 Method 23 Salt Spray 48 hour exposure No excessive corrosion Pass ESD test MIL-STD-202 Method Moisture Resistance cycles No excessive corrosion Pass ESD test MIL-STD-202 Method 6 Endurance 85 C, 00 hours, rated voltage Leakage current less than 0 na Refer to AEM QIQ Packaging Data: Chip Size Parts on 7 inch (78 mm) Reel 0402 (05), (608) 4, Website: &

90 Revision of March 207 Surface Mount ESD Suppressors PeDiode ESD Suppressors, PS0402V04AT Features: Excellent protection against ESD damage Ultra low capacitance for high speed data lines (<0. pf) Low typical leakage current (< na) Fast response time (< ns) Excellent 4KV trigger capability (0%) Bi-directional design Lead free and halogen free polymer composite materials RoHS compliant Operating temperature 55 C ~ +90 C Applications: Antennas USB2.0/3.0 HDMI.3/.4 Computer Peripherals Display Port Smart Mobile Phone Set Top Box Notebook Features: PS 0402 V04 A T () (2) (3) (4) (5) () Category code (2) Dimension code: L x W (inch) The first two digits - L (length) The last two digits - W (width) (3) Rated voltage code: V04-4 V DC (4) Series code (5) Package code: T - Tape & Reel Electrical Characteristics (@ 25 C): Characteristic Value IEC Direct Discharge IEC Air Discharge Trigger Voltage Clamping Voltage Response Time f = GHz Leakage 4 V DC Rated Voltage ESD Pulse Withstand Level 4-8 kv Level 4-5 kv 300 V typical 25 V typical Less than ns 0.05 pf typical na max 4 V DC max 00 Pulses typical Website: & 66

91 Revision of March 207 Surface Mount ESD Suppressors PeDiode ESD Suppressors, PS0402V04AT Shape and Dimensions: Size Inch/(mm) L W T BW ± ± ± ±0.004 (05) (.00 ± 0.) (0.50 ± 0.) (0.33 ± 0.) (0.23 ± 0.) Representative Test Waveform Per IEC Level 4, 8kV Direct Discharge: Fig.4 Clamped +8kV pulse waveform Recommended Foot Print Dimensions: Size Inch/(mm) 0402 (05) L G H (.60) 0.06 (0.40) (0.70) L G H Packaging and Marking Information: Package Tape & Reel Quantity (piece) 0402 (05) 5, Website: &

92 Revision of March 207 Surface Mount ESD Suppressors PeDiode ESD Suppressors, PS0402V04AT Recommended Reflow Soldering Profile: Profile Feature Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Liquidous temperature(t L ) Time(t L ) maintained above T L Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C/second max. 27 C 60~50 seconds Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) Time 25 C to peak temperature 30 seconds * 6 C/second max. 8 minutes max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Recommended conditions for hand soldering:. Appropriate temperature (max.) of soldering iron tip/soldering time (max.): 280 C/s or 350 C/ 3s. Using hot air rework station with tip that can melt the solder on both terminations at the same time is strongly recommended. Do not directly contact the chip termination with the tip of soldering iron. Storage Condition With Package: The maximum ambient temperature shall not exceed 35 C. Storage temperature higher than 35 C could result in the deformation of packaging materials. The maximum relative humidity recommended for storage is 75%.High humidity with high temperature could accelerate the oxidation of the solder plating on the termination and reduce the solderability of the components. Sealed plastic bags with desiccant shall be used to reduce the oxidation of the termination and shall only be opened prior to use. The products shall not be stored in areas where harmful gases containing sulfur or chlorine are present. Website: & 68

93 Revision of March 207 Surface Mount ESD Suppressors Surface Mount ESD Suppressor Array, EC04L4V02AT Application: Antenna circuit DVI USB2.0/3.0 HDMI.3/.4 IEEE-394 Features: Extremely quick response time (<ns) present ideal ESD protection Extremely low capacitance (0.pF typical) Extremely low leakage current (0.0μA) Zero signal distortion SMD (Surface Mount Device) Protection against ESD voltages and currents (IEC Level 4) Lead free, RoHS Compliance Operating temperature -55 C ~ +25 C Storage temperature range -55 C ~ +25 C Recommended Foot Print Dimensions: Unit Inch mm Y G Z X XL P P C Shape and Dimensions: Size Inch/(mm) 04 (25) L W T B C D E 0.098±0.004 (2.5±0.) 0.039±0.004 (.0±0.) 0.020±0.004 (0.5±0.) 0.008±0.004 (0.2±0.) 0.02±0.002 (0.3±0.05) 0.008±0.002 (0.2±0.05) 0.020±0.002 (0.5±0.05) Circuit Symbol: Pin Description,2,4,5 Data Lines 6,7,9, Data Lines (No Internal Connection) 3,8 Ground Packaging Information: Package Tape & Reel Quantity (piece) 04 (25) 5,000 Storage Conditions: Storage Time: 2 months max Storage Temperature : 5 C to 30 C Relative Humidity: < 60% RH 69 Website: &

94 Revision of March 207 Surface Mount ESD Suppressors Surface Mount ESD Suppressor Array, EC04L4V02AT Electrical Characteristics C): Characteristic Value IEC Direct Discharge IEC Air Discharge Trigger Voltage Clamping Voltage Response Time f = MHz Leakage 2 V DC Rated Voltage ESD Pulse Withstand Level 4 - kv Level 4-5 kv 300 V typical (measured per IEC , 8kV Direct Discharge) 30 V typical (measured per IEC , 8kV Direct Discharge) Less than ns 0. pf typical 0.0 μa max. 2 V DC max. 00 Pulses typical Fig. Dynamic resistance with positive clamping voltage t p = 0ns; Transmission Line Pulse (TLP) Fig. Eye Diagram (HDMI.3) Fig. 3 Insertion loss; typical value Website: & 70

95 Revision of March 207 Surface Mount ESD Suppressors Surface Mount ESD Suppressor Array, EC04L4V02AT Representative Test Waveform Per IEC Level 4, 8kv Direct Discharge: HDMI Interface Application: 7 Website: &

96 Revision of March 207 Surface Mount TVS Diodes Shape and Dimensions: Package Size inch/(mm) L W T BW b e A A 020 (DN0603) 0.024±0.002 (0.60±0.05) 0.03±0.002 (0.32±0.05) 0.02±0.002 (0.30±0.05) 0.006±0.002 (0.5±0.05) 0.0±0.002 (0.25±0.05) 0.05 (0.38) 0.0±0.002 (0.29±0.05) (0.0) 0402 (DFN06) 0.039±0.002 (.00±0.05) 0.024±0.002 (0.60±0.05) 0.020±0.002 (0.50±0.05) 0.04±0.002 (0.35±0.05) 0.020±0.002 (0.50±0.05) (0.65) 0.09±0.002 (0.49±0.05) (0.0) Packaging Information: Package Tape & Reel Quantity (piece) Marking 020 (DFN0603) 5,000 I 0402 (DFN06) TS0402C05V0,000 E (DFN06) TS0402C05VR30,000 S 04 (DFN25) 3,000 P424 Storage Conditions: Storage Time: 2 months max Storage Temperature : 5 C to 30 C Relative Humidity: < 60% RH Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM s website for updated catalog and terms and conditions of sale. Website: & 72

97 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode, TS020C05V3R0 Application: Cellular handsets and accessories Portable electronics Computers and peripherals Communication systems Audio and video equipment Features: Bi-directional ESD protection of one line Low capacitance (3 pf typical) IEC , level 4 (ESD) protection Ultra small SMD special package (020) Pb-Free, Halogen free/bfr free and RoHS compliant Operating temperature range 55 C~+25 C Storage temperature range -55 C~+50 C Recommended Foot Print Dimensions: Electrical Characteristics (@25 C): Characteristic ESD per IEC Direct Discharge ESD per IEC Air Discharge Peak Pulse Power (P PK ) Reverse Stand-Off Voltage (V RWM ) Condition Value Min. Typical Max. ±8 kv ±5 kv Reverse Breakdown Voltage (V BV ) I BV = ma 5.6 V 9 V Clamping Voltage (V CL ) I PP = A, t P = 8/20μs I PP = 5A, t P = 8/20μs Junction Capacitance (C J ) V RWM = 0V, f = MHz 3 pf Reverse Leakage Current (I RM ) V RWM = 5V μa 75 W 5 V 2 V 5 V Fig. 8/20μs pulse waveform according to IEC Fig. 2 ESD pulse waveform according to IEC Fig. 3 V-I characteristics for bidirectional ESD protection diode 73 Website: &

98 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode, TS020C05V3R0 Clamped Pulse Waveform per IEC Level 4, ±8kv Direct Discharge: Website: & 74

99 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode, TS0402C05V0 Application: Cellular handsets and accessories Portable electronics Computers and peripherals Communication systems Audio and video equipment Features: Bi-directional ESD protection of one line. IEC , level 4 (ESD) protection Ultra small SMD special packages (0402) Pb-Free, Halogen free and RoHS compliant Operating junction temperature -55 C~+25 C Storage temperature range -55 C~+50 C Recommended Foot Print Dimensions: Unit Inch mm L G H D E Electrical Characteristics (@25 C): Characteristic ESD per IEC Direct Discharge ESD per IEC Air Discharge Condition Value Min. Typical Max. ±8 kv ±6 kv Peak Pulse Power (P PK ) t P = 8/20μs 75 W Maximum Peak Pulse Current (I PP ) t P = 8/20μs 5 A Reverse Stand-Off Voltage (V RWM ) 5 V Reverse Breakdown Voltage (V BV ) I BV = ma 6 V Clamping Voltage (V CL ) I PP = A, t P = 8/20μs I PP = 5A, t P = 8/20μs 9 V 5 V Junction Capacitance (C J ) V RWM = 0V, f = MHz pf Reverse Leakage Current (I RM ) V RWM = 5V 2 μa 75 Website: &

100 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode, TS0402C05V0 Electrical Characteristics C): Fig. 8/20μs pulse waveform according to IEC Fig. 2 ESD pulse waveform according to IEC Fig. 3 V-I characteristics for bidirectional ESD protection diode Fig. 4 Junction capacitance as a function of reverse voltage; typical value Fig. 5 Dynamic resistance with positive clamping voltage t p = ns; Transmission Line Pulse (TLP) Fig. 6 Clamping voltage (V CL ) as a function of peak current (I pp ); t P = 8/20μs Website: & 76

101 Revision of March 207 Surface Mount TVS Diodes Ultra Low Capacitance ESD Protection Diode, TS0402C05VR30 Application: Cellular handsets and accessories Portable electronics Notebooks, desktops and servers HDMI.3/.4, PCI express, SATA, USB 2.0, DVI, display port High-speed data lines Features: Bi-directional ESD protection of one line. IEC , level 4 (ESD) protection IEC (EFT) rating - 40A (5/50μs) IEC (Lightning) rating - 24A (8/20μs) Low capacitance (0.3pF typical) Ultra small SMD special packages (0402) Pb Free, Halogen free and RoHS compliant Operating junction temperature -55 C~+25 C Storage temperature range -55 C~+50 C Recommended Foot Print Dimensions: Unit Inch mm L G H D E Electrical Characteristics (@25 C): Characteristic ESD per IEC Direct Discharge ESD per IEC Air Discharge Condition Value Min. Typical Max. ±8 kv ±6 kv Peak Pulse Power (P PK ) t P = 8/20μs 30 W Reverse Stand-Off Voltage (V RWM ) 5 V Reverse Breakdown Voltage (V BV ) I BV = ma 6.0 V 7.8 V Clamping Voltage (V CL ) I PP = A, t P = 8/20μs 4 V Junction Capacitance (C J ) V RWM = 0V, f = MHz 0.3 pf Reverse Leakage Current (I RM ) V RWM = 5V μa 77 Website: &

102 Revision of March 207 Surface Mount TVS Diodes Ultra Low Capacitance ESD Protection Diode, TS0402C05VR30 Electrical Characteristics C): Fig. 8/20μs pulse waveform according to IEC Fig. 2 ESD pulse waveform according to IEC Fig. 3 V-I characteristics for bidirectional ESD protection diode Fig. 4 Junction capacitance as a function of reverse voltage; typical value Fig. 5 Dynamic resistance with positive clamping voltage t p = ns; Transmission Line Pulse (TLP) Fig. 6 Clamping voltage (V CL ) as a function of peak current (I pp ); t P = 8/20μs Website: & 78

103 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode Array, TS044C05VR25 Features: Protects four high speed I/O lines ESD protection for high-speed data lines to EC (ESD) ±7kV (air), ±2kV (contact) IEC (EFT) rating. 40A (5/50 us) IEC (Lightning) rating. 5A (8/20 us) Low capacitance: 0.25pF typical Pb-Free, Halogen free and RoHS compliant Operating junction temperature -55 C~+50 C Storage temperature range -55 C~+50 C Application: High Definition Multi-Media Interface (HDMI.3&.4) DisplayPort Interface SATA and esata Interface USB 2.0 and USB 3.0 LVDS Interface PCI-Express Recommended Foot Print Dimensions: Unit Inch mm Y G H X X P P A Shape and Dimensions: Size Inch/(mm) 04 (DFN25) L W C D E F H A B 0.098±0.002 (2.5±0.05) 0.039±0.002 (.0±0.05) 0.020±0.002 (0.5±0.05) 0.020±0.002 (0.5±0.05) 0.04±0.002 (0.35±0.05) 0.020±0.002 (0.5±0.05) 0.020±0.002 (0.5±0.05) 0.008±0.002 (0.2±0.05) 0.06±0.002 (0.4±0.05) Circuit Symbol: Pin Description,2,4,5 Data Lines 6,7,9, NC 3,8 Ground Packaging Information: Package Tape & Reel Quantity (piece) Marking 04 (DFN25) 3,000 P424 Storage Conditions: Storage Time: 2 months max Storage Temperature : 5 C to 30 C Relative Humidity: < 60% RH 79 Website: &

104 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode Array, TS044C05VR25 Electrical Characteristics C): Characteristic Condition Value Min. Typical Max. ESD per IEC Direct Discharge ±2 kv ESD per IEC Air Discharge ±7 kv Peak Pulse Power (P PK ) t P = 8/20μs 50 W Maximum Peak Pulse Current (I PP ) t P = 8/20μs 3.4 A Reverse Stand-Off Voltage (V RWM ) 5 V Reverse Breakdown Voltage (V BV ) I BV = ma 6 V Clamping Voltage (V CL ) I PP = A, t P = 8/20μs 5 V I PP = 3.4A, t P = 8/20μs 25 V Junction Capacitance (C J ) Between I/O Pin and GND V RWM = 0V, f = MHz 0.25 pf 0.4 pf Reverse Leakage Current (I RM ) V RWM = 5V μa Fig. 8/20μs pulse waveform according to IEC Fig. 2 ESD pulse waveform according to IEC Fig. 3 V-I characteristics for bidirectional ESD protection diode Fig. 4 Non-repetitive peak pulse power vs. Pulse time Website: & 80

105 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode Array, TS044C05VR25 Electrical Characteristics C): Fig. 5 Power derating vs. Ambient temperature Fig. 6 Typical Junction Capacitance vs. Reveres voltage Fig. 7 Clamping voltage (V CL ) vs. peak pulse current (I pp ); t P = 8/20μs Fig. 8 Transmission Line Pulse (TLP) Measurement Fig. 9 Insertion Loss; Typical values 8 Website: &

106 Revision of March 207 Surface Mount TVS Diodes ESD Protection Diode Array, TS044C05VR25 HDMI Interface Application: HDMI Block Diagram Website: & 82

107 Revision of March 207 Over Voltage Protection Devices Quick Index: Surface Mount Multilayer Varistors High Surge Protection Devices Series Size Page ES (ESD Protection) 0402, 0603, NA (Normal Surge Protection) 0402, 0603, 0805, 206, 2, 82, HA (High Surge Protection) 206, 2, 82, HV (High Voltage) ESD Array 0508, SV (Super High Voltage) 2, 82, 2220, SC (Super High Current) 206, 2, 82, SN (Super High Network) 206, Website: &

108 Revision of March 207 Surface Mount Multilayer Varistors Product Identification: MLV 0402 ES 02V 00 N T () (2) (3) (4) (5) (6) (7) () Series Code: MLV Surface Mount Multilayer Varistor MVA -- MLV Array (2) Size Code: Standard EIA Chip Size (3) Application Code: ES Electro-static Discharge Protection NA Normal Surge Protection HA High Surge Protection (4) Max. Working Voltage: 02V 2 V (5) Capacitance for ES Series: 00 0 pf 02R5 2.5 pf Peak Current for HA/NA Series: 00 0 A (6) Capacitance Tolerance for ES Series: N ± 30% P Special (7) Packaging Code: T Tape & Reel B Bulk Operating Temperatures: -55ºC to +85ºC for size 0603 or smaller -55ºC to +25ºC for size 0805 or larger Website: & 84

109 Revision of March 207 Surface Mount Multilayer Varistors Shape and Dimensions: MLV Series L ESD Array T W E L W T E Size (mm) (mm) (mm) (mm) ± ± ± ± ± ± max ± max ± max ± max ± max ± max ± 0.20 Size L (mm) 2.00 ± ± 0.20 W (mm).25 ± ± 0.5 T (mm) 0.80 max max. A (mm) 0.20 ± ± 0. B (mm) 0.25 ± ± 0.5 Terms and Definitions: Term Max. Working Voltage Varistor Voltage(BDV) Max. Clamping Voltage Surge Current Surge Shift V/V Energy Absorption Typical Capacitance Definition Maximum steady-state DC operating voltage with typical leakage current less than 50 μa at 25 C Breakdown DC voltage measured at current of ma Maximum peak voltage across the part, measured at a specified pulse current and waveform Maximum peak current with the specified 8/20 μs waveform without damage The change of varistor voltage after applying the specified surge current Maximum energy dissipated with a specified /00 μs waveform without damage Capacitance measured with voltage bias less than 0.5 V RMS at KHz or MHz Nonlinear Exponentα α= log(v ma /V 0.mA )/ log(i VmA /I V0.mA ) Leakage Current Cut-off Frequency Typical leakage current at 25 C < 50 μa; Maximum leakage 200 μa. The frequency of -3 db insertion loss 85 Website: &

110 Revision of March 207 Surface Mount Multilayer Varistors Recommended Land Patterns: MLV Series Size A (mm) Solder pad layout C (mm) D (mm) ~ ~ ~ ~ ~ ~ ~.2 0.6~.0 0.8~ ~.5.2~.5.0~ ~2.5.2~.8.0~.4 2.8~ ~3.0.0~ ~ ~3.6.2~ ~ ~5.5.2~.8 ESD Array Series Size A (mm) B (mm) D (mm) F (mm) G (mm) Website: & 86

111 Revision of March 207 Surface Mount Multilayer Varistors Environmental Tests: No. Test Requirement Test condition Test reference Soldering heat resistance BDV change ±% No mechanical damage 2 Solderability New solder coverage 80% 3 4 Maximum current Maximum energy surge surge 5 Thermal cycling Low temperature resistance Low temperature load resistance High temperature resistance High temperature load resistance Humidity resistance Humidity load resistance BDV change ±% No mechanical damage BDV change ±% No mechanical damage BDV change ±% No mechanical damage Leakage current 200 μa BDV change ±% No mechanical damage Leakage current 200 μa BDV change ±% No mechanical damage Leakage current 200 μa BDV change ±% No mechanical damage Leakage current 200 μa BDV change ±% No mechanical damage Leakage current 200 μa BDV change ±% No mechanical damage Leakage current 200 μa BDV change ±% No mechanical damage Leakage current 200 μa One dip at 260 C for 5 sec. One dip at 255 C for 5 sec. Non-active flux 0 pulses of 8/20 μs with maximum surge current and 30 sec. interval at 25 C and 30 ~ 65% RH 0 pulses of /00 μs with maximum surge current and 90 sec. interval at 25 C and 30 ~ 65% RH 5 cycles between -40 C and 25ºC with 30 min. dwell time at the temperature extremes and 60 min. dwell time at 25 C MIL-STD-202 Method 2 IEC MIL-STD-202 Method 208 IEC CECC IEC 5- Test 4.5 CECC CECC IEC hr at -50 C IEC hr at -50 C with working voltage applied 00 hr at 50 C 00 hr at 85 C with working voltage applied 500 hr at 40 C and 90 ~ 95% RH 500 hr at 40 C and 90 ~ 95% RH with working voltage applied IEC MIL-STD-202 Method 8 CECC CECC MIL-STD-202 Method 3 IEC CECC 42000; MIL-STD-202 Method 3 IEC CECC ESD contact test* Varistor voltage change > 5% working voltage Contact electrostatic discharge 0 times with second intervals at 8 KV (Level 4 ) and polarity: +,- IEC ESD air test* Varistor voltage change > 5% working voltage Air contact electrostatic discharge 0 times with second intervals at 5 KV (Level 4 ) and polarity:+,- IEC * For ES series only. 87 Website: &

112 Revision of March 207 Surface Mount Multilayer Varistors Soldering Temperature Profile: Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Profile Feature Liquidous temperature(t L ) Time(t L ) maintained above T L 50 C 200 C 60~20 seconds 3 C/second max. 27 C 60~50 seconds Pb-Free Assembly Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) Time 25 C to peak temperature 30 seconds * 6 C/second max. 8 minutes max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM s website for updated catalog and terms and conditions of sale. Website: & 88

113 Revision of March 207 Surface Mount Multilayer Varistors ESD Protection (ES) Series Features: Fast Response < 0.5 ns Low Working Voltage 5 V Low Capacitance Low Leakage Current < μa Low Clamping Voltage Application Fields: Cell Phones Digital Cameras PDAs MP3 Notebooks Part Number Working Voltage (Max) Clamping Voltage (Max) Leakage Current (Max) Typical Capacitance Value ( MHz) Tolerance of Cap. DC(V) (V) ILDC(μA) C (pf) (%) MLV0402ES005V00N ± 30 MLV0402ES005V0056N ± 30 MLV0402ES005V0033N ± 30 MLV0402ES005V0022N ± 30 MLV0402ES005V00N ± 30 MLV0402ES005V0005P ~9 pf MLV0402ES02V00N ± 30 MLV0402ES02V0056N ± 30 MLV0402ES02V0033N ± 30 MLV0402ES02V0022N ± 30 MLV0402ES02V00N 2 60 ± 30 MLV0402ES02V0005P ~9 pf MLV0402ES024V0003N ± 30 MLV0402ES024V02R5P ~4 pf MLV0402ES024V00R8P ~.5 pf MLV0603ES005V00N ± 30 MLV0603ES005V0056N ± 30 MLV0603ES005V0033N ± 30 MLV0603ES005V0022N ± 30 MLV0603ES005V00N ± 30 MLV0603ES005V0005P ~9 pf MLV0603ES02V00N ± 30 MLV0603ES02V0056N ± 30 MLV0603ES02V0033N ± 30 MLV0603ES02V0022N ± 30 MLV0603ES02V00N 2 60 ± 30 MLV0603ES02V0005P ~9 pf MLV0603ES024V0003N ± 30 MLV0603ES024V02R5P ~4 pf MLV0603ES024V00R8P ~.5 pf MLV0805ES005V00N ± 30 MLV0805ES005V0056N ± Website: &

114 Revision of March 207 Surface Mount Multilayer Varistors Normal Surge Protection (NA) Series Features: Fast Response < 0.5 ns Low Capacitance Low Clamping Voltage and High Energy Absorption Application Fields: Telecommunications Automotive Systems Data Systems Power Supplies Ordering Information: Part Number AC (V RMS ) Working Voltage (max) DC (V) Breakdown Voltage ma (V) Peak Current (max) 8/20 μs (A) Clamping Voltage (max) (A) (V) Energy Absorption (max) /00 μs (J) Typical Capacitance Ref. KHz (pf) MLV0402NA006V (7.5~.5) MLV0402NA009V (.2~3.8) MLV0402NA0V (2.8~7.3) MLV0402NA04V (5.3~20.7) MLV0402NA08V (2.6~26.4) MLV0603NA006V (7.5~.5) MLV0603NA009V (.2~3.8) MLV0603NA04V (5.3~20.7) MLV0603NA08V (2.6~26.4) MLV0603NA022V (24.3~29.7) MLV0603NA030V (35.~42.9) MLV0603NA038V (42.3~5.7) MLV0805NA006V (7.5~.5) MLV0805NA009V (.2~3.8) MLV0805NA0V (2.75~7.25) MLV0805NA04V (5.3~20.7) MLV0805NA08V (2.6~26.4) MLV0805NA022V (24.3~29.7) MLV0805NA026V (29.7~36.3) MLV0805NA030V (35.~42.9) MLV0805NA038V (42.3~5.7) MLV0805NA045V (50.4~6.6) MLV206NA006V (7.5~.5) MLV206NA04V (5.3~20.7) MLV206NA08V (2.6~26.4) MLV206NA022V (24.3~29.7) MLV206NA026V (29.7~36.3) MLV206NA030V (35.~42.9) Website: & 90

115 Revision of March 207 Surface Mount Multilayer Varistors Normal Surge Protection (NA) Series Ordering Information: Part Number Working Voltage (max) Breakdown Voltage Peak Current (max) Clamping Voltage (max) Energy Absorption (max) Typical Capacitance AC (V RMS ) DC (V) ma (V) 8/20 μs (A) (A) (V) /00 μs (J) KHz (pf) MLV206NA038V (42.3~5.7) MLV206NA045V (50.4~6.6) MLV206NA056V (6.2~74.8) MLV206NA065V (73.8~90.2) MLV206NA085V (90~) MLV2NA006V (7.5~.5) MLV2NA08V (2.6~26.4) MLV2NA022V (24.3~29.7) MLV2NA026V (29.7~36.3) MLV2NA030V (35.~42.9) MLV2NA038V (42.3~5.7) MLV2NA045V (50.4~6.6) MLV2NA056V (6.2~74.8) MLV2NA085V (90~) MLV82NA08V (2.6~26.4) MLV82NA030V (35.~42.9) MLV82NA038V (42.3~5.7) MLV82NA045V (50.4~6.6) MLV2220NA08V (2.6~26.4) MLV2220NA030V (35.~42.9) MLV2220NA038V (42.3~5.7) MLV2220NA056V (6.2~74.8) Website: &

116 Revision of March 207 Surface Mount Multilayer Varistors High Surge Protection (HA) Series Features: Fast Response < 0.5 ns Low Capacitance Low Clamping Voltage and High Energy Absorption Application Fields: Telecommunications Automotive Systems Data Systems Power Supplies Ordering Information: Part Number WorkingVoltage (max) AC (V RMS ) DC (V) Breakdown Voltage ma (V) Peak Current (max) 8/20 μs (A) (A) Clamping Voltage (max) (V) Energy Absorption (max) /00 μs (J) Typical Capacitance KHz (pf) MLV206HA04V (5.3~20.7) MLV206HA08V (2.6~27.0) MLV206HA022V (24.3~29.8) MLV206HA026V (29.7~36.3) MLV206HA030V (35.~42.9) MLV206HA038V (42.3~5.7) MLV2HA04V (5.3~20.7) MLV2HA08V (2.6~27.0) MLV2HA022V (24.3~29.8) MLV2HA026V (29.7~36.3) MLV2HA030V (35.~42.9) MLV2HA038V (42.3~5.7) MLV82HA08V (2.6~27.0) MLV82HA030V (35.~42.9) MLV82HA038V (42.3~5.7) MLV82HA045V (50.4~6.6) MLV2220HA04V (5.3~20.7) MLV2220HA08V (2.6~27.0) MLV2220HA022V (24.3~29.8) MLV2220HA030V (35.~42.9) MLV2220HA038V (42.3~5.7) MLV2220HA045V (50.4~6.6) Website: & 92

117 Revision of March 207 Surface Mount Multilayer Varistors High Voltage (HV) Series Features: Bidirectional and symmetrical V/I characteristics Low Capacitance Meet IEC Standard Large withstanding surge current capability - 400~500A (@8/20μs) Multilayer construction provides higher power dissipation Shape and Dimensions: Unit (mm) MLV3220HV240V0500 MLV3220HV270V0500 Length (L) Width (W) Thickness (T).7±0.30 Termination bandwidth (b) W L T MLV3220HV390V ± ± /-0. MLV3220HV430V ±0.30 b MLV3220HV470V0400 Product Identification: MLV 3220 HV 270V 0500 Category Code Size Code Application Code Breakdown Voltage Code Surge Current Code MLV = Multilayer Varistor Inch (mm) 3220 (853) HV = High Voltage 390V = 390V 430V = 430V 470V = 470V 0400 = 400A 0450 = 450A 0500 = 500A Electrical Characteristics: Operating temperature: -55 to +85 C Part Number Size Working Voltage Breakdown (V) Vac Vdc A V Clamping Voltage 2 Surge Current (A) Energy (J) Capacitance (pf) MLV3220HV240V (±%) > MLV3220HV270V (±%) > MLV3220HV390V (±%) > MLV3220HV430V (±%) > MLV3220HV470V (±%) >2.6 5 The breakdown voltage was measured at ma current. 2 The clamping voltage was measured at standard current 3220 (A). 3 The surge current was tested at 8/20 μs waveform. 4 The capacitance value only for customer reference, it s not formal specification. 93 Website: &

118 Revision of March 207 Surface Mount Multilayer Varistors High Voltage (HV) Series Construction and Materials: Packaging: Body ZnO Termination 2 Ag/Ni/Sn Chip Size Parts on 7 inch (78mm) Reel 3220,000 Recommended Foot Print Dimensions: Surge Waveform: Size A (mm) B (mm) C (mm) Severity Level t (=.67t ) t ~7.0.6~ ~5.8 8 µs 20 µs Environmental Test: Test item Test condition Requirement High Temperature Storage High Temperature Storage High Temperature Storage High Temperature Load High Temperature Load * Temperature : 25±2 C * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Temperature : 25±2 C * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Temperature : 25±2 C * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Temperature : 85±2 C * Rated working voltage applied * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Temperature : 85±2 C * Rated working voltage applied * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Breakdown voltage change : within ±% * No mechanical damage * Breakdown voltage change : within ±% * No mechanical damage * Breakdown voltage change : within ±% * No mechanical damage * Breakdown voltage change : within ±% * No mechanical damage * Breakdown voltage change : within ±% * No mechanical damage Website: & 94

119 Revision of March 207 Surface Mount Multilayer Varistors ESD Array Series Features: Low Leakage Current Low Leakage Inductance and Fast Response Four Varistors in a chip Minimizing Crosstalk between Adjacent Circuits Application Fields: ESD protection ECU protection I/O Protection LCD Display Ordering Information: Part Number Working Voltage (Max.) Breakdown Voltage Clamping Voltage (Max.) Leakage Current (Max.) Insulation Resistance (Min.) Typical Capacitance Value ( MHz) Tolerance of Cap. DC(V) (V) (V) (μa) (MΩ) (pf) (%) MVA0508L4V005C00N ± 30 MVA062L4V08C020N ± Website: &

120 Revision of March 207 High Surge Protection Devices Construction and Materials: Body Nano special ceramic Termination 2 Ag/Ni/Sn Packaging: Chip Size Parts on 7 inch (78mm) Reel , ,000 2, Environmental Test: Test item Test condition Requirement High Temperature Storage Low Temperature Storage Temperature Cycle * Temperature : 25±2 C * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Temperature : -40±2 C * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Step : -40±3 C for 30±3min * Step 2 : 25 C for hour * Step 3 : 25±3 C for 30±3min * Step 4 : 25 C for hour * Number of cycle : 5 times * Test after placing in ambient temperature for 24 hours * Breakdown voltage change : within ±% * No mechanical damage * Breakdown voltage change : within ±% * No mechanical damage * Breakdown voltage change : within ±% * No mechanical damage High Temperature Load * Temperature : 85±2 C * Rated working voltage applied * Time : 00±2 hours * Test after placing in ambient temperature for 24 hours * Breakdown voltage change : within ±% * No mechanical damage Damp Heat Load/Humidity Load * Temperature : 40±2 C * Humidity : 90~95% RH * Rated working voltage applied * Time : 500±2 hours * Test after placing in ambient temperature for 24 hours * Breakdown voltage change : within ±% * No mechanical damage Website: & 96

121 Revision of March 207 High Surge Protection Devices Recommended Foot Print Dimensions: Size A (mm) B (mm) C (mm) ~.6 0.8~.2.6~ ~2.5.2~.8.5~ ~2.5.3~ ~ ~2.9.6~ ~ ~4.6.3~ ~ ~7.0.6~ ~5.8 Recommended Reflow Soldering Profile: Profile Feature Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Liquidous temperature(t L ) Time(t L ) maintained above T L Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C/second max. 27 C 60~50 seconds Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) 30 seconds * 6 C/second max. Time 25 C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party s life, body or property) not expressly set forth in applicable AEM product documentation. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEM s website for updated catalog and terms and conditions of sale. 97 Website: &

122 Revision of March 207 High Surge Protection Devices Super High Voltage (SV) Series Features: Bidirectional SMD type body and size symmetrical 0806, 206, V/I 208, characteristics 2, 82, 2220 Meet and 3220 IEC Standard Large Bidirectional withstanding and symmetrical surge current V/I characteristics capability - 200~800A (@8/20μs) Meet IEC Standard Multilayer Large withstanding construction surge provides voltage higher capability power - 0.5~2KV dissipation (@.2/50μs, 2Ω) Large withstanding surge current capability - 0~00A (@8/20μs) Multilayer construction provides higher power dissipation RoHS compliant Application Fields: LED lighting Power board Base station AC power supply Industrial equipment and controllers Application Fields: Recognized under the components program of UL and CSA File number: E47504 Shape and Dimensions: Unit (mm) Length (L) 2.20± / / / / /-0.30 Width (W).70± / / / / /-0.30 Thickness (T).80 Max..90 Max Max Max Max Max. Termination bandwidth (b) 0.25± ± ± / / /-0. Product Identification: HSP 2220 SV 390V 0800 Category Code Size Code Application Code Breakdown Voltage Code Surge Current Code HSP = High Surge Protection Device Inch SV = Super High Voltage 240V = 240V 270V = 270V 390V = 390V 430V = 430V 470V = 470V 00 = 0A 0200 = 200A 0350 = 350A 0500 = 500A 0800 = 800A 00 = 00A Website: & 98

123 Revision of March 207 High Surge Protection Devices Super High Voltage (SV) Series Electrical Characteristics: Operating temperature: -55 to +85 C Part Number Size Working Voltage Breakdown (V) Clamping Voltage 2 (V) Surge Voltage 2Ω (kv) Vac Vdc time time Surge Current (A) 5 times Energy µs (J) Capacitance (pf) Safety Certification UL 5 CSA 6 HSP0806SV240V (±%) Pending HSP0806SV430V (±%) Pending HSP206SV240V (±%) Pending HSP2SV390V (±%) HSP2SV470V (±%) Pending HSP2SV470V (±%) Pending HSP82SV270V (±%) HSP82SV470V (±%) HSP82SV430V (±%) HSP82SV470V (±%) HSP2220SV270V (±%) Pending HSP2220SV390V (±%) HSP2220SV430V (±%) HSP2220SV470V (±%) HSP2220SV240V (±%) Pending HSP2220SV390V (±%) HSP2220SV430V (±%) HSP2220SV470V (±%) HSP3220SV430V (±%) Pending HSP3220SV470V (±%) Pending The breakdown voltage was measured at ma current. 2 The clamping voltage was measured at standard current 2 (2.5A), 82 (5A), 2220 (A) and 3220 (A). 3 The surge voltage was tested at.2/50 μs waveform and 2Ω. The surge current was tested at 8/20 μs waveform. 4 The capacitance value only for customer reference, it s not formal specification. 5 The UL safety approval complies with standard UL449 3 rd. 6 The CSA safety approval complies with standard CSA C22.2 No Website: &

124 Revision of March 207 High Surge Protection Devices Super High Current (SC) Series Features: Bidirectional SMD type 206~2220 and symmetrical sizes V/I characteristics Meet Bidirectional IEC and symmetrical Standard V/I characteristics Large Meet IEC /K2 withstanding surge standard current capability - 200~800A (@8/20μs) Large withstanding surge current capability à 500~8000A Multilayer (@8/20μs) construction provides higher power dissipation Excellent low leakage current <5μA Multilayer construction provides higher power dissipation RoHS compliant Application Fields: Telecom equipment RJ45, LAN connector, Ethernet Outdoor/Indoor AP/IAD Security system IP CAM Low voltage power line Base station Shape and Dimensions: Unit (mm) L Length (L) / / / /-0.3 Width (W) / / / /-0.3 W T Thickness (T).90 Max Max Max Max. Termination bandwidth (b) 0.5± ± / /-0. b Product Identification: HSP 206 SC 02V 0500 Category Code Size Code Application Code Breakdown Voltage Code Surge Current Code HSP = High Surge Protection Device Inch SC = Super High Current 02V = 2V 024V = 24V 047V = 47V 056V = 56V 075V = 75V 082V = 82V 0500 = 500A 00 = 00A 2000 = 2000A 3000 = 3000A 5000 = 5000A 8000 = 8000A Surge Waveform: Severity Level t (=.67t ) t2 8 µs 20 µs Fig. 8/20 µs surge definition Website: & 0

125 Revision of March 207 High Surge Protection Devices Super High Current (SC) Series Electrical Characteristics: Part Number Size Working Voltage VAC VDC Breakdown (V) Clamping Voltage (V) 2 Surge 8/20μs (A) 3 HSP206SC02V (2~20) < HSP206SC024V (±%) < HSP206SC047V (±%) < HSP206SC075V (±%) <0 500 HSP2SC024V (±%) <45 00 HSP2SC047V (±%) <85 00 HSP2SC075V (±%) <0 00 HSP82SC047V (±%) < HSP82SC075V (±%) < HSP2220SC047V (±%) < HSP2220SC047V (±%) < HSP2220SC075V (±%) < The breakdown voltage was measured at ma current 2 The clamping voltage was measured at standard current 206 (A), 2 (2.5A), 82 (5A) and 2220 (A) 3 The surge current was tested at 8/20 μs waveform Part Number Non-linear Coefficient (α) Leakage Current (μa) Before Surge Test After Surge Test Capacitance khz (pf) Response Time (T rise ) Operating Temperature ( C) HSP206SC02V < < HSP206SC024V < < HSP206SC047V < < HSP206SC075V < < HSP2SC024V00 20 <5 < HSP2SC047V00 30 < < HSP2SC075V00 30 < < < ns -55 to +25 HSP82SC047V <5 <80 20 HSP82SC075V <5 < HSP2220SC047V <5 < HSP2220SC047V <5 < HSP2220SC075V <5 < The capacitance value only for customer reference, it s not formal specification Website: &

126 Revision of March 207 High Surge Protection Devices Super High Network (SN) Series Features: Bidirectional and symmetrical V/I characteristics Meet IEC /K2 Standard standard Large withstanding surge current voltage capability: - 4~6KV 200~800A (@8/20μs) (@/700μs) Multilayer Excellent low construction leakage current provides <μa higher power dissipation Multilayer construction provides higher power dissipation Application Fields: Telecom equipment RJ45, LAN connector, Ethernet Outdoor/Indoor AP/IAD Security system IP CAM Low voltage power line DC2V, AC24V, PoE ADSL/XDSL telecom equipment PoE modules HUB switch VOIP phones Other Networks Shape and Dimensions: Unit (mm) L Length (L) / /-0.2 Width (W) / /-0.2 W T Thickness (T).90 Max Max. Termination bandwidth (b) 0.5± ±0.25 b Product Identification: HSP 206 SN 02V 4000 Category Code Size Code Application Code Breakdown Voltage Code Surge Voltage Code HSP = High Surge Protection Device Inch (mm) 206 (326) 2 (3225) SN = Super High Network 02V = 2V 047V = 47V 075V = 75V 4000 = 4kV 6000 = 6kV Surge Waveform: Severity Level t (=.67t ) t2 µs 700 µs Fig. CCITT 7 /700 µs surge definition Website: & 2

127 Revision of March 207 High Surge Protection Devices Super High Network (SN) Series Electrical Characteristics: Part Number Size Working Voltage VAC VDC Breakdown (V) Clamping Voltage (V) 2 Surge /700μs (A) 3 Surge Voltage (kv) HSP206SN02V (2~20) < HSP206SN02V (2~20) < HSP2SN047V (±%) < HSP2SN047V (±%) < HSP2SN075V (±%) < HSP2SN075V (±%) < The breakdown voltage was measured at ma current. 2 The clamping voltage was measured at standard current 206(A) and 2 (2.5A). 3 The surge current was tested at /700 μs waveform, Ri=40Ω. Common-mode testing is to test all data lines while the GND. Part Number Non-linear Coefficient (α) Leakage Current (μa) Before Surge Test After Surge Test Capacitance khz (pf) Response Time (T rise ) Operating Temperature ( C) HSP206SN02V HSP206SN02V HSP2SN047V HSP2SN047V < ns -55 to +25 HSP2SN075V HSP2SN075V The capacitance value only for customer reference, it s not formal specification. 3 Website: &

128 Company Overview AEM, is a global manufacturer redefining the standards of quality and value in the electronic components industry with its leading edge technologies. History AEM, was founded in 986. Phenomenal growth since its inception has ranked AEM three times among the Inc. 500 listing of America s Fastest-Growing Private Companies. AEM s outstanding achievements earned a U.S. presidential commendation letter from then President Bill Clinton. In 995, AEM merged the key technical staff of Wallace Technical Ceramics, Inc. That same year, AEM acquired the Mepcopal high-reliability thick-film fuse line from Philips/ Copal. These mergers and acquisitions represented a logical combination of assets and technical abilities to achieve a full spectrum of passive components with superior multilayer ceramic-based technologies. Since 995, AEM has used its technological expertise to successfully grow its current limiting micro-fuse production and holds a dominant position in the circuit protection market in the aerospace industry. In 996, AEM became the first US corporation to start mass production of ferrite chip beads, power beads, and ferrite/ceramic inductors in its San Diego facility. AEM is also the world s sole manufacturer of highreliability ferrite chip beads designed for the space and military use. In 2004, AEM launched a new product line of SolidMatrix surface mount chip fuses which combined AEM s strengths in both circuit protective and multilayer components manufacturing. Today, AEM s Electronic Components Division is poised to become one of the top five global suppliers of SMT multilayer ceramic inductive and circuit protective components in the new millennium. AEM s products and services include the following: Multilayer Ferrite Chip Beads/Power Beads; Multilayer Ferrite/Ceramic Inductors; SolidMatrix Surface Mount Chip Fuses; Multilayer Varistors; High-reliability Current Limiting Micro-fuses and Fusistors; High-reliability SMT Fuses; High-reliability Ferrite Chip Beads & Inductors; Turn Key COTS Up-Screening Services; Tin Whisker Mitigation. Mission Our mission goal is to build lasting partnerships with the customers, vendors, employees, and share holders. We are committed to constantly striving for excellence and perfection in providing products and services with the highest quality and values. The Headquarters and Research & Development The global headquarters and R&D Center of AEM are located in Sorrento Valley, San Diego, California s Telecomm Valley. The Factory and Engineering locations include the San Diego facility and a new Suzhou Engineering Center and Manufacturing Base in China-Singapore Suzhou Industrial Park. Products & Services From satellites in space, to computers and cellular devices on land and sea, AEM s products are used globally for EMI signal filtering and circuit protection in the telecommunication, PC, consumer electronics, automotive, and aerospace industries.

129 Contents Products Overview and Applications AEM Components Co., Ltd iii MCB Multilayer Ferrite Chip Beads (General Use) 0402 (05) Series (608) Series (202) Series (326) Series 3 2 (3225) Series (456) Series 3 82 (4532) Series 3 Electrical Characteristics 4 MCB Multilayer Ferrite Chip Beads (High Speed) (05) Series 0603 (608) Series 0805 (202) Series 206 (326) Series Electrical Characteristics MBA Multilayer Ferrite Chip Bead Arrays (326) Series 2 MCP Multilayer Ferrite Power Beads (High Current) (608) Series (202) Series (326) Series 4 2 (3225) Series (456) Series 5 82 (4532) Series 5 Electrical Characteristics 6 MCI Multilayer Ferrite Inductors (General Use) Series Series Series 2 Electrical Characteristics Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax: i

130 Contents (cont.) AEM Components Co., Ltd MHI Multilayer Ceramic Inductors (High Frequency) Series Series 25 Electrical Characteristics 26 TFI Thin Film Chip Inductors Series Series Series 3 WHI Thin Film Chip Inductors C Series C Series C Series C Series C Series L Series 4 08 L Series H Series H Series H Series 43 WHI Packaging 44 Inductor Terminology 45 Reliability Tests 46 Soldering Temperature Profiles, Storage Requirements 49 Packaging and Storage 50 Cross Reference Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax: ii

131 Products Overview and Applications AEM Components Co., Ltd AEM was the first in the U.S. to start mass production of ferrite beads and ferrite/ceramic inductors using a wet multilayer process. AEM s proprietary materials (inks and pastes), patented processes (US Patent Number 5,650,99) and custom production equipment are the cornerstones for mass producing high quality ferrite and ceramic inductive components. Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/05, 0603/608, 0805/202, and 206/326 A complete set of ferrite/ceramics and electrode materials providing a wide range of electrical properties Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes Applications Computers and Peripherals Video cards, sound cards, fax/modem cards, printers, keyboards, network interface cards, PDAs (personal digital assistants), and notebook computers Tele Communications Multi-port modems, frame relays, central office relays, subscription group carrier, T & E MUXs, EA PBX equipment, cellular phones, mobile telephone switching, cellular phone base station and switching, PHS (personal handy phones), and residential and business phones Data Communications Bridges, LANs, modems, repeaters, routers, hubs, concentrators, network I/F cards, and data switches Consumer Electronics VCRs, audio, electronic entertainment equipment, car navigation systems, radar detectors, CB & FM radios, CATV, set-top boxes, DSS set-top boxes, electronic games, digital TVs, and DVDs AEM s inductive components are used for noise limiting and separation, tuning and matching circuits, and in many other circuits requiring inductance. AEM s ferrite chip beads have high impedance at 0 MHz and are used for noise suppression. Ferrite beads installed in series with signal and/or power circuits suppress high frequency noise. The noise is converted into heat because of the hysteresis loss in the ferrite material. By selecting the appropriate impedance value, an insertion loss between 3 to 8 db can be achieved using a single chip bead without the need for a ground termination. Typical chip bead suppression frequency ranges from to,000 MHz and rated currents are from 0. to 4.0 amps. AEM s ferrite chip inductors have been used in T, Pi, or L type LC noise separation circuits with capacitors. Because of the tight tolerances and high Q values of AEM s inductors, very steep attenuation and high insertion losses of up to 0 db can be achieved. Our ferrite inductors have Q values from 5 to 45, measured at frequencies from 0.4 to 50 MHz and self-resonant frequencies in a range from 3 to 320 MHz. The ceramic chip inductors can be used at frequencies up to 8 GHz with Q values from to 5 at 0 MHz and from 6 to 46 at 800 MHz. 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax: iii

132 Multilayer Ferrite Chip Beads Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/05, 0603/608, 0805/202, and 206/326 A complete set of ferrite and electrode materials providing a wide range of electrical properties Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes RoHS compliant when -T option is specified Applications Noise suppression in computers and peripherals Noise suppression in telecommunications Noise suppression in data communications Noise suppression in consumer electronics Recommended PC Board Land Patterns CHIP SIZE EIA/EIAJ L INCH (mm) G INCH (mm) H INCH (mm) 0402(05) (.60) 0.06 (0.40) (0.60) 0603(608) 0.2 (2.60) (0.55) (0.94) 0805(202) 0.8 (3.00) (0.66) (.45) 206(326) 0.73 (4.40) (.50) 0.07 (.80) 2(3225) 0.73 (4.40) (.50) 0.6 (2.70) Operating Temperature -55ºC +25ºC AEM Components Co., Ltd Product Identification MCB 0805 G P T - T () (2) (3) (4) (5) (6) (7) () Series code: MCB: Multilayer Ferrite Chip Bead (2) Dimensions: L x W inches The first two digits: L (length) The last two digits: W (width) (3) Characteristic code: F, G (4) Value code: Impedance (ohms at 0 MHz) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: P = ±25% Other tolerances may be available upon request. (6) Package code: T = Tape & Reel B = Bulk (7) Termination type code: T = 0% Sn plating Shape and Dimensions G SOLDER W L L H NICKEL SILVER METALLIZATION ELECTRODE BW T CHIP SIZE EIA/EIAJ 0402/ / / /326 2/3225 LENGTH (L) INCH (mm) WIDTH (W) INCH (mm) THICKNESS (T) INCH (mm) ± ± ± (.00 ± 0.) (0.50 ± 0.) (0.50 ± 0.) ± ± ± (.60 ± 0.5) (0.80 ± 0.5) (0.80 ± 0.5) ± ± ± (2.00 ± 0.20) (.25 ± 0.20) (0.90 ± 0.20) 0.26 ± ± ± (3.20 ± 0.20) (.60 ± 0.20) (. ± 0.20) 0.26 ± ± ± (3.20 ± 0.20) (2.50 ± 0.20) (.30 ± 0.20) Other sizes and values may be available upon customer s request. TERMINATION (BW) INCH (mm) 0.0 ± (0.25 ± 0.) 0.04 ± (0.36 ± 0.5) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

133 MCB Series (General Use) AEM Components Co., Ltd AEM Part Tolerance Max. R DC Max. I MCB0402G0 P MCB0402G P MCB0402G P MCB0402G P MCB0402G P MCB0402G2 20 P MCB0402G P MCB0402G P MCB0402G P MCB0402G P MCB0402G2 00 P MCB0603G0 P MCB0603G P MCB0603G P MCB0603G P MCB0603G 0 P MCB0603G2 20 P MCB0603G4 40 P MCB0603G5 50 P MCB0603G8 80 P MCB0603G P MCB0603G P MCB0603G P MCB0603G P MCB0603G P MCB0603G2 00 P MCB0603G P MCB0603G P MCB0805F P MCB0805F P MCB0805F P MCB0805F P MCB0805F P MCB0805G 0 P MCB0805G2 20 P MCB0805G5 50 P MCB0805G P MCB0805G P MCB0805G P MCB0805G P MCB0805G P MCB0805G2 00 P MCB0805G P MCB0805G P Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

134 AEM Components Co., Ltd MCB Series (General Use) AEM Part Number Ω Tolerance Max. R DC Ω Max. I A MCB206F90 9 P MCB206F P MCB206F P MCB206F P MCB206F P MCB206F 0 P MCB206F2 20 P MCB206F5 50 P MCB206F P MCB206F P MCB206F P MCB206F P MCB206F P MCB206G2 00 P MCB206G52 500@50MHz P MCB206F @50MHz P MCB2G P Please add tolerance, packaging and termination type codes when ordering Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

135 AEM Components Co., Ltd Electrical Characteristics (Curves not listed are available upon request) 00 MCB0402G2 00 MCB0402G Z, XL, R (Ohm) Z XL R Z,XL,R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB 0603G300 MCB 0603G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB 0603G800 MCB 0603G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

136 AEM Components Co., Ltd Electrical Characteristics (Curves not listed are available upon request) MCB 0603G MCB 0603G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB0603G8 MCB 0603G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB 0603G60 MCB 0603G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) 0 Z XL R FREQUENCY (MHz) FREQUENCY (MHz) Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

137 AEM Components Co., Ltd Electrical Characteristics (Curves not listed are available upon request) MCB 0805F300 MCB 0805F500 MCB 0805F Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz) MCB 0805G MCB 0805G2 MCB 0805G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz) MCB 0805G60 MCB 0805G2 MCB0805G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) 0 lzl XL R Z, XL, R (Ohm) 0 Z XL R FREQUENCY (MHz) 0 00 FREQUENCY (MHz) 0 00 FREQUENCY (MHz) Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

138 AEM Components Co., Ltd Electrical Characteristics (Curves not listed are available upon request) MCB 206F300 MCB 206F Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB 206F600 MCB 206F Z, XL, R (O hm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB 206F800 MCB 206F Z, XL, R (O hm) Z XL R Z, XL, R (O hm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

139 AEM Components Co., Ltd Electrical Characteristics (Curves not listed are available upon request) MCB 206F MCB 206F Z, XL, R (O hm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB 206F20 MCB 206F Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB 206F60 MCB 206G Z, XL, R (Ohm) Z XL R Z, XL, R (Ohm) 0 Z XL R FREQUENCY (MHz) FREQUENCY (MHz) Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

140 Multilayer Ferrite Chip Beads (High Speed) Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/05, 0603/608, 0805/202and 206/326 Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes RoHS compliant when -T option is specified Applications High frequency noise suppression in computers and peripherals High frequency noise suppression in telecommunications High frequency noise suppression in data communications High frequency noise suppression in consumer electronics Recommended PC Board Land Patterns CHIP SIZE EIA/EIAJ L INCH (mm) G INCH (mm) H INCH (mm) 0402(05) (.60) 0.06 (0.40) (0.60) 0603(608) 0.2 (2.60) (0.55) (0.94) Operating Temperature -55ºC +25ºC AEM Components Co., Ltd Product Identification MCB 0805 S 2 P T-T () (2) (3) (4) (5) (6)7) () Series code: MCB: Multilayer Ferrite Chip Bead (2) Dimensions L x W inches The first two digits: L (length) The last two digits: W (width) (3) Characteristic code:s (4) Value code: Impedance (ohms at 0 MHz) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: P = ±25% Other tolerances may be available upon request. (6) Package code: T = Tape & Reel B = Bulk (7) Termination type code: T = 0% Sn plating 0805(202) 0.8 (3.00) (0.66) (.45) 206(326) 0.73 (4.40) (.50) 0.07 (.80) Shape and Dimensions G SOLDER W L L H NICKEL SILVER METALLIZATION ELECTRODE BW T CHIP SIZE EIA/EIAJ 0402/ / / /326 LENGTH (L) INCH (mm) WIDTH (W) INCH (mm) THICKNESS (T) INCH (mm) ± ± ± (.00 ± 0.) (0.50 ± 0.) (0.50 ± 0.) ± ± ± (.60 ± 0.5) (0.80 ± 0.5) (0.80 ± 0.5) ± ± ± (2.00 ± 0.20) (.25 ± 0.20) (0.90 ± 0.20) 0.26 ± ± ± (3.20 ± 0.20) (.60 ± 0.20) (. ± 0.20) Other sizes and values may be available upon customer s request. TERMINATION (BW) INCH (mm) 0.0 ± (0.25 ± 0.) 0.04 ± (0.36 ± 0.5) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

141 MCB Series (High Speed) AEM Components Co., Ltd AEM Part Number Ω Tolerance Max. R DC Ω Max. I A MCB0402S0 P MCB0402S P MCB0402S P MCB0402S P MCB0402S2 20 P MCB0402S P MCB0402S P MCB0402S P MCB0603S0 P MCB0603S P MCB0603S P MCB0603S P MCB0603S 0 P MCB0603S2 20 P MCB0603S P MCB0603S P MCB0603S P MCB0603S2 00 P MCB0805S P MCB0805S P MCB0805S P MCB0805S P MCB0805S2 20 P MCB0805S P MCB0805S P MCB0805S P MCB0805S2 00 P MCB206S90 9 P MCB206S P MCB206S P MCB206S P MCB206S2 20 P MCB206S P MCB206S P MCB206S P MCB206S2 00 P Please add tolerance, packaging and termination type codes when ordering. 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

142 Electrical Characteristics AEM Components Co., Ltd (Curves not listed are available upon request) MCB0603S2 MCB0603S60 MCB0603S Z, XL, R (Ohm) 0 Z XL R Z, XL, R (Ohm) 00 0 Z XL R Z, XL, R (Ohm) 00 0 Z XL R FREQUENCY (MHz) FREQUENCY (MHz) FREQUENCY (MHz) MCB0805S60 MCB0805S Z, XL, R (Ohm) 00 0 Z XL R Z, XL, R (Ohm) 00 0 Z XL R FREQUENCY (MHz) FREQUENCY (MHz) MCB206S2 MCB206S Z, XL, R (Ohm) 00 0 Z R XL Z, XL, R (Ohm) 00 0 Z XL R FREQUENCY (MHz) FREQUENCY (MHz) 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax:

143 Multilayer Ferrite Chip Bead Arrays Features The Multilayer Ferrite Chip Bead Arrays retain all the features of Multilayer Ferrite Chip Beads. In addition, it provides multiple circuits in a single package, which reduces the required land space on PCB and the cost for assembly. Applications Noise suppression in signal I/O lines and other circuits that require multiple chip beads for noise suppression Operating Temperature - 55 o C + 25 o C Dimensions Product Identification AEM Components Co., Ltd MBA 206 A 300 P 4 T - T () (2) (3) (4) (5) (6) (7) (8) () Series code: MBA: Multilayer Ferrite Chip Bead Array (2) Dimensions: L x W inches The first two digits: L (length) The last two digits: W (width) (3) Characteristics code: A Standard, B High Speed (4) Value code: Impedance (ohms at 0 MHz) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: P = ± 25% (6) Number of circuits: 4 = Four circuits (7) Package code: T = Tape & Reel, B = Bulk (8) Termination type code: T = 0% Sn plating L INCH (mm) W INCH (mm) T INCH (mm) B INCH (mm) P INCH (mm) E INCH (mm) 0.26±0.008 (3.20±0.20) 0.063±0.008 (.60±0.20) 0.03±0.008 (0.80±0.20) 0.06±0.008 (0.40±0.20) 0.03±0.004 (0.80±0.) 0.02±0.008 (0.30±0.20) AEM Part Number Z@0MHz Ω Tolerance Max. R DC Ω MBA206A300P4 30 P MBA206A600P4 60 P MBA206A2P4 20 P MBA206A22P4 220 P MBA206A30P4 300 P MBA206A60P4 600 P MBA206A2P4 00 P MBA206B300P4 30 P MBA206B600P4 60 P MBA206B2P4 20 P MBA206B22P4 220 P MBA206B30P4 300 P MBA206B60P4 600 P Please add packaging and termination codes when ordering. Max. I A Shenhu Road, Suzhou Industrial Park Jiangsu, P.R. China Phone: , Fax: