Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
|
|
- Piers Joseph
- 5 years ago
- Views:
Transcription
1 SMTO ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology, which provides a clamping voltage lower than the avalanche voltage (but above the rated working voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level.this LTKAK6 series can be combined in series or parallel solutions to offer various clamping levels and surge withstand options. Agency Approvals AGENCY Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted Parameter Symbol Value Unit Operating Junction and Storage Temperature Range T J, T STG (-40 to 125 Current Rating 1 I PP 6 ka Note: 1. Rated min I PP measured with 8/20μs pulse. AGENCY FILE NUMBER E C The LTKAK6 SMT package provides a more compact PCB layout than typical through-hole TO-218 AK TVS components. Features High Power TVS designed in a surface mount and compact SMTO-218 package Patent pending package design Foldbak Technology for superior clamping characteristics Tube or tape and reel pack options available Ideal for automatic pick and place assembly and reflow process to reduce the manufacturing cost and increase the soldering quality as compared to axial leaded packages Low clamping and slope resistance. Sharp breakdown voltage. Meet MSL level1, per J-STD-020, LF maximum peak of 260 C Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(sn (IPC/JEDEC J-STD-609A.01 UL Recognized compound meeting flammability rating V-0 Electrical Characteristics (T A =25 C unless otherwise noted Part Numbers Standoff Voltage (V SO (V Reverse Leakage (I SO (µa Note: Using 8/20 waveshape as defined in IEC nd edition. Reverse Breakdown Voltage (V I T Test Current I T Clamping Voltage V (I PP Temp Coefficient of V BR Capacitance 0V Bias 10kHz Min Volts Max Volts (ma Volts (%/ O C (nf LTKAK6-058C LTKAK6-066C LTKAK6-076C Surge Ratings Part Numbers (80/20µS (A Max Peak Pulse Current (I PP (10/350µS (A (10/1000µS (A Min Min Min LTKAK6-058C 6, LTKAK6-066C 6, LTKAK6-076C 6,
2 Temperature (T Transient Voltage Suppression Diodes SMTO ka > LTKAK6 series Soldering Parameters Reflow Condition Lead free assembly T P t p - Temperature Min (T s(min 150 C Ramp-up Critical Zone to T P Pre Heat - Temperature Max (T s(max 200 C - Time (min to max (t s secs Average ramp up rate (Liquidus Temp (T A to peak T s(max T s(min t s Preheat t L Ramp-down T S(max to T A - Ramp-up Rate Reflow - Temperature (T A (Liquidus 217 C - Time (min to max (t s seconds 25 C t 25 C to Peak Time (t Peak Temperature (T P /-5 C Time within 5 C of actual peak Temperature (t p seconds Flow/Wave Soldering (Solder Dipping Ramp-down Rate Time 25 C to peak Temperature (T P Do not exceed 260 C 6 C/second max 8 minutes Peak Temperature : Dipping Time : Soldering : 265 O C 10 seconds 1 time Physical Specifications Part Numbering System Weight Contact manufacturer LTKAK6 XXXX X Case Terminal Physical Specifications Epoxy encapsulated Tin plated lead, solderable per MIL-STD-202 Method 208 Series Type OPTION CODE: BLANK Reel Tape -TP Tube Pack Stand Off Voltage (Please Refer to Electrical Characteristics Chart AK10 Series High Temp Storage HTRB JESD22-A103 JESD22-A108 Part Marking System MSL JESDEC-J-STD020, Level 1 Marking Code H3TRB RSH JESD22-A101 JESD22-B106 LTKAK6-076C YMXXX LF YMTXX Littelfuse Logo Trace Code Marking Y: Year Code M: Month Code T: Manufacture Code XXX XX: Sequential Lot Number
3 SMTO ka > LTKAK6 series Dimensions SMTO-218 Note: Coplanarity of solder side is controlled within 0.08mm. Dimension Inches Millimeters Min Max Min Max A B C D E F G H J L M N Packaging Part Number Weight Packing Mode Base Quantity LTKAK6-xxxC 4.34g Tape & Reel 32mm/13 tape 400 LTKAK6-xxxC-TP 4.34g Tube Pack 100(25/Tube Tape and Reel Specification Dimensions in millimeters Direction of Feed
4 SMTO KA > LTKAK10 series LTKAK10 Series RoHS Pb e3 Description The LTKAK10 series offer superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology, which provides a clamping voltage lower than the avalanche voltage (but above the rated working voltage. Therefore, any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create various capability and flexible protection solutions. Agency Approvals LTKAK10 in SMTO-218 package provide the enhanced quality, easy manufacturing and compact mechanical design than current AK TVS families. AGENCY Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted Parameter Symbol Value Unit Operating Junction and Storage Temperature Range T J, T STG (-40 to 125 C Current Rating 1 I PP 10 ka Note: 1. Rated min I PP measured with 8/20μs pulse. AGENCY FILE NUMBER E Features Compact design having the Hi Power TVS in surface mount package Patent pending package design Foldbak Technology for superior clamping factor Option for pack in tube or tape and reel. Ideal for automatic pick and place assembly and reflow process to reduce the manufacturing cost and increase the soldering quality compared to axial leads package Low clamping and slope resistance. Sharp breakdown voltage. Halogen free and RoHS compliant 2nd level interconnect is Pb-free (IPC/JEDEC J-STD-609A.01 Plastic package has underwriters laboratory flammability classification 94V-O Electrical Characteristics Part Numbers Standoff Voltage (V SO (V Reverse Leakage (I SO (µa Reverse Breakdown Voltage (V I T Min Volts Max Volts Test Current I T (ma V CL Volts Clamping Voltage V Peak Pulse Current (I PP I PP (8/20μS (A min typ min typ Temp Coefficient of V BR Capacitance 0 Bias 10kHz I PP (10/350μS (A (%/ O C (nf LTKAK10-058C , LTKAK10-066C ,000 13, LTKAK10-076C ,000 12, Note: Using 8/20µS wave shaped defined in IEC
5 Temperature (T Transient Voltage Suppression Diodes SMTO KA > LTKAK10 series Soldering Parameters Reflow Condition Lead free assembly T P t p - Temperature Min (T s(min 150 C Ramp-up Critical Zone to T P Pre Heat - Temperature Max (T s(max 200 C - Time (min to max (t s secs Average ramp up rate (Liquidus Temp (T A to peak T s(max T s(min t s Preheat t L Ramp-down T S(max to T A - Ramp-up Rate Reflow - Temperature (T A (Liquidus 217 C - Time (min to max (t s seconds 25 C t 25 C to Peak Time (t Peak Temperature (T P /-5 C Time within 5 C of actual peak Temperature (t p seconds Flow/Wave Soldering (Solder Dipping Ramp-down Rate Time 25 C to peak Temperature (T P Do not exceed 260 C 6 C/second max 8 minutes Peak Temperature : Dipping Time : Soldering : 265 O C 10 seconds 1 time Physical Specifications Part Numbering System Weight Contact manufacturer LTKAK10 XXXX X Case Epoxy encapsulated Series Type OPTION CODE: BLANK Reel Tape -TP Tube Pack Terminal Tin plated lead, solderable per MIL-STD-202 Method 208 Ratings and Characteristic Curves (T A =25 C unless otherwise noted Stand Off Voltage (Please Refer to Electrical Characteristics Chart AK10 Series Peak Power Derating Part Marking System Marking Code Percent of Rated Value T J - Initial Junction Temperature (ºC Littelfuse Logo LTKAK10-076C LF YMTXX Trace Code Marking Y: Year Code M: Month Code T: Manufacture Code XX: Sequential Lot Number Please contact Littelfuse for reliability or FIT/MTBF data, the performance is subject to vary and depends on the end customers application condition.
6 SMTO KA > LTKAK10 series Dimensions SMTO-218 Tab Note: Coplanarity of solder side is controlled within 0.08mm. B J 0.08mm A C E 15C±5C H 4 F G Dimension Inches Millimeters Min Max Min Max A B C D E F G H J D Pad Layout Packaging Part Number Weight Packing Mode Base Quantity LTKAK10-xxxC 4.34g Tape & Reel 32mm/13 tape 400 LTKAK10-xxxC-TP 4.34g Tube Pack 100(25/Tube Tape and Reel Specification Dimensions in millimeters Direction of Feed
Subject: TVS Diode LKTAK series alternative assembly line approval
April 13th, 2017 RE: LFPCN41259 To: Our Valued Customers. From: Littelfuse Product Management Team Subject: TVS Diode LKTAK series alternative assembly line approval In order to support growing demand,
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationAQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationAQxxC Series 450W Discrete Bidirectional TVS Diode
AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationSM24CANB Series 500W TVS Diode Array
SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationTeccor brand Thyristors Standard Bidirectional SIDACs
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More information0.15 +/ (0.006" +/ ) / (0.033" +/ ) / (0.088" +/ ") 1.91 (0.075") 1.09 (0.043") 0.91 (0.
Note: For wave solder, increase the spacing in both the horizontal Surface Mount Polymeric.66 and Electrostatic +/- vertical.6 dimensions by Discharge Suppressors.54 (.") where denoted by an asterisk (*).4
More informationFeatures. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
More information1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes............................................................ 1 General Information...........................................................................
More informationS J
1. Part Number Identification SPECIFICATION Brightek (Europe) Limited S01-2220 - 240 250 J Series Name Inner Code Size 1206~3220 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More informationSFI Electronics Technology
1. Part Number Identification SFI 2220 SA 240 250 J Company Logo Inner Code Size 1206~3220 SA SHA Series 250 250 = 25 10 0 V=25J 1R5 1R5 = 1.5J Breakdown Voltage 240 = 24 10 0 V=24V 151 = 15 10 1 V=150V
More informationFeatures. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationAUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175 C.
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt... 12 P6KE Series 600 Watt... 18 1.5KE
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationSpezifikation für Freigabe / specification for release
Datum / Date : 2007-01-24 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SISE W L T a 402 0.5 1.0 0.6 0.25 603 0.8 1.6 0.9 0.3 805 1.25 2.0 1.2 0.3 1206 1.6 3.2 1.5 0.5 1210 2.5 3.2 1.5 0.5
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More information6125FF Fast-acting subminiature fuses
Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information
More informationSinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationC310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses
Technical Data 10405 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop,
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationPolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description
Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high
More informationSpezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550200 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSICSD1A5, 1 V, 5 A, TO--L LSICSD1A5 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationPOLY-FUSE Resettable PTCs Surface Mount > 1206L Series
Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationCRS-A Series High Power Anti-Surge Resistor
*RoHS COMPLIANT, **HALOGEN FREE & AEC-Q200 COMPLIANT Features Thick film technology Power rating up to 2 watts at 70 C High power surge withstanding Sulfur-resistant design (ASTM B-809) RoHS compliant*
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationSPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration
More informationLow profile Fast response to fault current Compatible with high temperature solders
Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationAxial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series
229/ 2AG, Slo-Blo Fuse with Indicating Option PS E Description Agency Approvals Agency Agency File Number Ampere Range E10480 250mA - 3.5A LR 29862 250mA - 7A E10480 4A - 7A Littelfuse 229/230 series Slo-Blo
More information1W, 10V - 200V Surface Mount Silicon Zener Diode
1W, 10V - 200V Surface Mount Silicon Zener Diode FEATURES Photo Glass passivated junction Ideal for automated placement Low inductance Typical IR less than 1μA above 11V Compliant to RoHS Directive 2011/65/EU
More informationGEN2 SiC Schottky Diode LSIC2SD120A20, 1200 V, 20 A, TO-220-2L. Description. SiC Schottky Diode. Features. Environmental
LSIC2SD12A2, 12 V, 2 A, TO-22-2L LSIC2SD12A2 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
More informationMetal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
More information1.0A Low Profile Chip Schottky Rectifier TSCD12WSH-TSCD16WSH. Features. Application. Mechanical Data
1.0A Low Profile Chip Schottky Rectifier 1.0A Low Profile Chip Schottky Rectifier Features Lead less chip form, no lead damage Low profile with SMD package Low power loss, High efficiency High current
More informationLSIC2SD065C06A 650 V, 6 A SiC Schottky Barrier Diode
LSICSD065C06A 650 V, 6 A SiC Schottky Barrier Diode Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
More information1025HC Fast-acting, high current, surface mount ceramic tube fuses
Supersedes February 2017 Fast-acting, high current, surface mount ceramic tube fuses HALOGEN HF FREE Applications Primary and secondary circuit protection: Server and desktop power supplies Gaming console
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationRadial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
More informationSpecification Status: Released
PAGE NO.: 1 OF 9 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationLSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSIC2SD12C1, 12 V, 1 A, TO-252-2L (DPAK) LSIC2SD12C1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationSH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
More informationSF-0603SP150M SF-0603SP200M SF-0603SP250M
E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer
More informationE CQC CQC CQC CQC CQC D-Seires. 11 to to to
Description CNR D/V/P/H/N series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
More informationSpecification Status: Released
PAGE NO.: OF 8 Specification Status: Released GENERAL DESCRIPTION Littelfuse PolyZen devices are polymer enhanced, precision Zener diode microassemblies. They offer resettable protection against multi-watt
More informationGEN2 SiC Schottky Diode. Description. SiC Schottky Diode. Features. Applications. Environmental
GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) LSIC2SD12C8 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high
More informationAxial Lead & Cartridge Fuses 5 20 mm > Time-Lag > 215 Series
5 20 mm > Time-Lag >, 5 x 20 mm, Time-Lag (Slo-Blo ) Fuse Description 5x20mm Time-Lag surge withstand ceramic body cartridge fuse designed IC specification Features International (IC ) Standards for use
More informationCHIPSESD DEVICES BENEFITS APPLICATIONS FEATURES
CHIPSES EVICES Littelfuse s ChipSES family of Silicon ES devices, available in EIA-0201 and EIA-0402 sized rectangular SMT passive component packages, can help protect electronic circuits against damage
More informationMF-PSMF Series - PTC Resettable Fuses
*RoHS COMPLIANT Features Compact design to save board space - 0805 footprint Small size results in very fast time to react to fault events Symmetrical design Low profile RoHS compliant* and halogen free**
More informationVaristor Products Radial Lead Varistors > ZA Series
Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include
More informationLSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode
LSIC2SD065E40CCA 650 V, 40 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationLSIC2SD120A10. GEN2 SiC Schottky Diode LSIC2SD120A10, 1200 V, 10 A, TO-220-2L. RoHS. Description
LSIC2SD12A1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationIND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules
IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules 12Vdc input; 16Vdc to 34Vdc output; 65W Max Power Vin+ VIN VOUT PGOOD MODULE Vout+ Applications Industrial Equipment Control Boards Test Equipment
More informationGEN2 SiC Schottky Diode LSIC2SD120E40CC, 1200 V, 40 A, TO-247-3L. Description. SiC Schottky Diode. Features. Applications.
LSIC2SD12E4CC RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating junction temperature of 175
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationFLT007A0Z/FLT007A0-SRZ Input Filter Modules 75Vdc Input Voltage Maximum; 7A Output Current Maximum
75Vdc Input Voltage Maximum; 7A Output Current Maximum Applications Distributed power architectures Intermediate bus voltage applications Telecommunications equipment Wireless Base stations Enterprise
More informationPolyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.
MMC Metallized polyester (PET) SMD According to IEC 6384-19 RoHS Compliant typical applications Construction.5 H B Bypassing, signal coupling. General purpose for highest reliability. Technical data Polyester
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationRadial Leaded > 16R Series. Description. Features. Applications. Additional Information. Datasheet. Maximum Time To Trip Current (A) P d typ.
16R Series RoHS Description Littelfuse 16R Series Radial Leaded PTCs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More informationGlass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
More informationFeatures 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
More information